def pwmEnable(pwm_pin):
""" Ensures PWM module for the given pin is enabled and its ocp helper
is loaded. """
global PWM_PINS_ENABLED
if PWM_PINS_ENABLED.get(pwm_pin): return
pin_config = PWM_PINS[pwm_pin]
assert (pin_config), "*Invalid PWM pin: '%s'" % pwm_pin
for overlay in pin_config[2]:
cape_manager.load(overlay, auto_unload=False)
delay(250) # Give it some time to take effect
cape_manager.load(pin_config[0], auto_unload=False)
delay(250)
helper_path = pin_config[1]
# Make sure output is disabled, so it won't start outputing a
# signal until analogWrite() is called:
if (sysfs.kernelFilenameIO('%s/%s' % (helper_path, PWM_RUN)) == '1\n'):
sysfs.kernelFilenameIO('%s/%s' % (helper_path, PWM_RUN), '0')
# Duty cyle must be set to 0 before changing frequency:
sysfs.kernelFilenameIO('%s/%s' % (helper_path, PWM_DUTY), '0')
# Is this still true??
sysfs.kernelFilenameIO('%s/%s' % (helper_path, PWM_PERIOD),
str(PWM_DEFAULT_PERIOD))
addToCleanup(lambda : pwmDisable(pwm_pin))
PWM_PINS_ENABLED[pwm_pin] = True
def pwmEnable(pwm_pin):
""" Ensures PWM module for the given pin is enabled and its ocp helper
is loaded. """
global PWM_PINS_ENABLED
if PWM_PINS_ENABLED.get(pwm_pin): return
pin_config = PWM_PINS[pwm_pin]
assert (pin_config), "*Invalid PWM pin: '%s'" % pwm_pin
for overlay in pin_config[2]:
cape_manager.load(overlay, auto_unload=False)
delay(250) # Give it some time to take effect
cape_manager.load(pin_config[0], auto_unload=False)
delay(250)
helper_path = pin_config[1]
# Make sure output is disabled, so it won't start outputing a
# signal until analogWrite() is called:
if (sysfs.kernelFilenameIO('%s/%s' % (helper_path, PWM_RUN)) == '1\n'):
sysfs.kernelFilenameIO('%s/%s' % (helper_path, PWM_RUN), '0')
# Duty cyle must be set to 0 before changing frequency:
sysfs.kernelFilenameIO('%s/%s' % (helper_path, PWM_DUTY), '0')
# Is this still true??
sysfs.kernelFilenameIO('%s/%s' % (helper_path, PWM_PERIOD),
str(PWM_DEFAULT_PERIOD))
addToCleanup(lambda: pwmDisable(pwm_pin))
PWM_PINS_ENABLED[pwm_pin] = True
def pwm_init(): # Enable EHRPWM module clocks: memory.setReg(CM_PER_EPWMSS1_CLKCTRL, MODULEMODE_ENABLE) # Wait for enable complete: while (memory.getReg(CM_PER_EPWMSS1_CLKCTRL) & IDLEST_MASK): delay(1) memory.setReg(CM_PER_EPWMSS2_CLKCTRL, MODULEMODE_ENABLE) # Wait for enable complete: while (memory.getReg(CM_PER_EPWMSS2_CLKCTRL) & IDLEST_MASK): delay(1)
def pwm_init():
# Enable EHRPWM module clocks:
memory.setReg(CM_PER_EPWMSS1_CLKCTRL, MODULEMODE_ENABLE)
# Wait for enable complete:
while (memory.getReg(CM_PER_EPWMSS1_CLKCTRL) & IDLEST_MASK):
delay(1)
memory.setReg(CM_PER_EPWMSS2_CLKCTRL, MODULEMODE_ENABLE)
# Wait for enable complete:
while (memory.getReg(CM_PER_EPWMSS2_CLKCTRL) & IDLEST_MASK):
delay(1)
def pwmEnable(pwm_pin):
""" Ensures given PWM output is reserved for userspace use and
sets proper pinmux. Sets frequency to default value if output
not already reserved. """
assert (pwm_pin in PWM_PINS), "*Invalid PWM pin: '%s'" % pwm_pin
# Set pinmux mode:
pinmux.pinMux(PWM_PINS[pwm_pin][0], PWM_PINS[pwm_pin][1])
if ('sysfs' not in pinmux.kernelFileIO(PWM_FILES[pwm_pin][PWM_REQUEST])):
# Reserve use of output:
pinmux.kernelFileIO(PWM_FILES[pwm_pin][PWM_REQUEST], '1')
delay(1) # Give it some time to take effect
# Make sure output is disabled, so it won't start outputing a
# signal until analogWrite() is called:
if (pinmux.kernelFileIO(PWM_FILES[pwm_pin][PWM_ENABLE]) == '1\n'):
pinmux.kernelFileIO(PWM_FILES[pwm_pin][PWM_ENABLE], '0')
# Duty cyle must be set to 0 before changing frequency:
pinmux.kernelFileIO(PWM_FILES[pwm_pin][PWM_DUTY], '0')
# Set frequency to default:
pinmux.kernelFileIO(PWM_FILES[pwm_pin][PWM_FREQ], str(PWM_DEFAULT_FREQ))
def pwmEnable(pwm_pin):
""" Ensures given PWM output is reserved for userspace use and
sets proper pinmux. Sets frequency to default value if output
not already reserved. """
assert (pwm_pin in PWM_PINS), "*Invalid PWM pin: '%s'" % pwm_pin
# Set pinmux mode:
pinmux.pinMux(PWM_PINS[pwm_pin][0], PWM_PINS[pwm_pin][1])
if ('sysfs' not in pinmux.kernelFileIO(PWM_FILES[pwm_pin][PWM_REQUEST])):
# Reserve use of output:
pinmux.kernelFileIO(PWM_FILES[pwm_pin][PWM_REQUEST], '1')
delay(1) # Give it some time to take effect
# Make sure output is disabled, so it won't start outputing a
# signal until analogWrite() is called:
if (pinmux.kernelFileIO(PWM_FILES[pwm_pin][PWM_ENABLE]) == '1\n'):
pinmux.kernelFileIO(PWM_FILES[pwm_pin][PWM_ENABLE], '0')
# Duty cyle must be set to 0 before changing frequency:
pinmux.kernelFileIO(PWM_FILES[pwm_pin][PWM_DUTY], '0')
# Set frequency to default:
pinmux.kernelFileIO(PWM_FILES[pwm_pin][PWM_FREQ],
str(PWM_DEFAULT_FREQ))
