def main(argv=None):
r"""Routine for post-processing COCO data from two algorithms.
Provided with some data, this routine outputs figure and TeX files
in a folder needed for the compilation of the provided LaTeX templates
for comparing two algorithms (``*cmp.tex`` or ``*2*.tex``).
The used template file needs to be edited so that the command
``\bbobdatapath`` points to the output folder created by this routine.
The output files will contain performance tables, performance
scaling figures and empirical cumulative distribution figures. On
subsequent executions, new files will be added to the output folder,
overwriting existing older files in the process.
Keyword arguments:
*argv* -- list of strings containing options and arguments. If not
given, sys.argv is accessed.
*argv* must list folders containing BBOB data files. Each of these
folders should correspond to the data of ONE algorithm.
Furthermore, argv can begin with, in any order, facultative option
flags listed below.
-h, --help
displays this message.
-v, --verbose
verbose mode, prints out operations.
-o OUTPUTDIR, --output-dir=OUTPUTDIR
changes the default output directory (:file:`ppdata`) to
:file:`OUTPUTDIR`
--noise-free, --noisy
processes only part of the data.
--settings=SETTING
changes the style of the output figures and tables. At the
moment only the only differences are in the colors of the
output figures. SETTING can be either "grayscale", "color"
or "black-white". The default setting is "color".
--fig-only, --rld-only, --tab-only, --sca-only
these options can be used to output respectively the ERT
graphs figures, run length distribution figures or the
comparison tables scatter plot figures only. Any combination
of these options results in no output.
--conv
if this option is chosen, additionally convergence
plots for each function and algorithm are generated.
--rld-single-fcts
generate also runlength distribution figures for each
single function.
--expensive
runlength-based f-target values and fixed display limits,
useful with comparatively small budgets. By default the
setting is based on the budget used in the data.
--not-expensive
expensive setting off.
--svg
generate also the svg figures which are used in html files
Exceptions raised:
*Usage* -- Gives back a usage message.
Examples:
* Calling the rungeneric2.py interface from the command line::
$ python bbob_pproc/rungeneric2.py -v Alg0-baseline Alg1-of-interest
will post-process the data from folders :file:`Alg0-baseline` and
:file:`Alg1-of-interest`, the former containing data for the
reference algorithm (zero-th) and the latter data for the
algorithm of concern (first). The results will be output in the
default output folder. The ``-v`` option adds verbosity.
* From the python interpreter (requires that the path to this
package is in python search path)::
>> import bbob_pproc as bb
>> bb.rungeneric2.main('-o outputfolder PSO DEPSO'.split())
This will execute the post-processing on the data found in folder
:file:`PSO` and :file:`DEPSO`. The ``-o`` option changes the output
folder from the default to :file:`outputfolder`.
"""
if argv is None:
argv = sys.argv[1:]
# The zero-th input argument which is the name of the calling script is
# disregarded.
global ftarget
try:
try:
opts, args = getopt.getopt(argv, genericsettings.shortoptlist, genericsettings.longoptlist)
except getopt.error, msg:
raise Usage(msg)
if not (args):
usage()
sys.exit()
#Process options
outputdir = genericsettings.outputdir
for o, a in opts:
if o in ("-v", "--verbose"):
genericsettings.verbose = True
elif o in ("-h", "--help"):
usage()
sys.exit()
elif o in ("-o", "--output-dir"):
outputdir = a
elif o == "--fig-only":
genericsettings.isRLDistr = False
genericsettings.isTab = False
genericsettings.isScatter = False
elif o == "--rld-only":
genericsettings.isFig = False
genericsettings.isTab = False
genericsettings.isScatter = False
elif o == "--tab-only":
genericsettings.isFig = False
genericsettings.isRLDistr = False
genericsettings.isScatter = False
elif o == "--sca-only":
genericsettings.isFig = False
genericsettings.isRLDistr = False
genericsettings.isTab = False
elif o == "--noisy":
genericsettings.isNoisy = True
elif o == "--noise-free":
genericsettings.isNoiseFree = True
elif o == "--settings":
genericsettings.inputsettings = a
elif o == "--conv":
genericsettings.isConv = True
elif o == "--rld-single-fcts":
genericsettings.isRldOnSingleFcts = True
elif o == "--runlength-based":
genericsettings.runlength_based_targets = True
elif o == "--expensive":
genericsettings.isExpensive = True # comprises runlength-based
elif o == "--not-expensive":
genericsettings.isExpensive = False
elif o == "--svg":
genericsettings.generate_svg_files = True
elif o == "--los-only":
warnings.warn("option --los-only will have no effect with rungeneric2.py")
elif o == "--crafting-effort=":
warnings.warn("option --crafting-effort will have no effect with rungeneric2.py")
elif o in ("-p", "--pickle"):
warnings.warn("option --pickle will have no effect with rungeneric2.py")
else:
assert False, "unhandled option"
# from bbob_pproc import bbob2010 as inset # input settings
if genericsettings.inputsettings == "color":
from bbob_pproc import genericsettings as inset # input settings
config.config()
elif genericsettings.inputsettings == "grayscale": # probably very much obsolete
from bbob_pproc import grayscalesettings as inset # input settings
elif genericsettings.inputsettings == "black-white": # probably very much obsolete
from bbob_pproc import bwsettings as inset # input settings
else:
txt = ('Settings: %s is not an appropriate ' % genericsettings.inputsettings
+ 'argument for input flag "--settings".')
raise Usage(txt)
if (not genericsettings.verbose):
warnings.simplefilter('module')
warnings.simplefilter('ignore')
print ("Post-processing will generate comparison " +
"data in folder %s" % outputdir)
print " this might take several minutes."
dsList, sortedAlgs, dictAlg = processInputArgs(args, verbose=genericsettings.verbose)
if 1 < 3 and len(sortedAlgs) != 2:
raise ValueError('rungeneric2.py needs exactly two algorithms to compare, found: '
+ str(sortedAlgs)
+ '\n use rungeneric.py (or rungenericmany.py) to compare more algorithms. ')
if not dsList:
sys.exit()
for i in dictAlg:
if genericsettings.isNoisy and not genericsettings.isNoiseFree:
dictAlg[i] = dictAlg[i].dictByNoise().get('nzall', DataSetList())
if genericsettings.isNoiseFree and not genericsettings.isNoisy:
dictAlg[i] = dictAlg[i].dictByNoise().get('noiselessall', DataSetList())
for i in dsList:
if i.dim not in genericsettings.dimensions_to_display:
continue
if (dict((j, i.instancenumbers.count(j)) for j in set(i.instancenumbers)) <
inset.instancesOfInterest):
warnings.warn('The data of %s do not list ' %(i) +
'the correct instances ' +
'of function F%d.' %(i.funcId))
if len(sortedAlgs) < 2:
raise Usage('Expect data from two different algorithms, could ' +
'only find one.')
elif len(sortedAlgs) > 2:
warnings.warn('Data from folders: %s ' % (sortedAlgs) +
'were found, the first two will be processed.')
# Group by algorithm
dsList0 = dictAlg[sortedAlgs[0]]
if not dsList0:
raise Usage('Could not find data for algorithm %s.' % (sortedAlgs[0]))
dsList1 = dictAlg[sortedAlgs[1]]
if not dsList1:
raise Usage('Could not find data for algorithm %s.' % (sortedAlgs[0]))
# get the name of each algorithm from the input arguments
tmppath0, alg0name = os.path.split(sortedAlgs[0].rstrip(os.sep))
tmppath1, alg1name = os.path.split(sortedAlgs[1].rstrip(os.sep))
for i in dsList0:
i.algId = alg0name
for i in dsList1:
i.algId = alg1name
# compute maxfuneval values
dict_max_fun_evals1 = {}
dict_max_fun_evals2 = {}
for ds in dsList0:
dict_max_fun_evals1[ds.dim] = np.max((dict_max_fun_evals1.setdefault(ds.dim, 0), float(np.max(ds.maxevals))))
for ds in dsList1:
dict_max_fun_evals2[ds.dim] = np.max((dict_max_fun_evals2.setdefault(ds.dim, 0), float(np.max(ds.maxevals))))
config.target_values(genericsettings.isExpensive, {1: min([max([val/dim for dim, val in dict_max_fun_evals1.iteritems()]),
max([val/dim for dim, val in dict_max_fun_evals2.iteritems()])]
)})
config.config()
######################### Post-processing #############################
if genericsettings.isFig or genericsettings.isRLDistr or genericsettings.isTab or genericsettings.isScatter:
if not os.path.exists(outputdir):
os.mkdir(outputdir)
if genericsettings.verbose:
print 'Folder %s was created.' % (outputdir)
# prepend the algorithm name command to the tex-command file
abc = 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'
lines = []
for i, alg in enumerate(args):
lines.append('\\providecommand{\\algorithm' + abc[i] + '}{' +
str_to_latex(strip_pathname1(alg)) + '}')
prepend_to_file(os.path.join(outputdir,
'bbob_pproc_commands.tex'), lines, 1000,
'bbob_proc_commands.tex truncated, consider removing the file before the text run'
)
# Check whether both input arguments list noisy and noise-free data
dictFN0 = dsList0.dictByNoise()
dictFN1 = dsList1.dictByNoise()
k0 = set(dictFN0.keys())
k1 = set(dictFN1.keys())
symdiff = k1 ^ k0 # symmetric difference
if symdiff:
tmpdict = {}
for i, noisegrp in enumerate(symdiff):
if noisegrp == 'nzall':
tmp = 'noisy'
elif noisegrp == 'noiselessall':
tmp = 'noiseless'
if dictFN0.has_key(noisegrp):
tmp2 = sortedAlgs[0]
elif dictFN1.has_key(noisegrp):
tmp2 = sortedAlgs[1]
tmpdict.setdefault(tmp2, []).append(tmp)
txt = []
for i, j in tmpdict.iteritems():
txt.append('Only input folder %s lists %s data.'
% (i, ' and '.join(j)))
raise Usage('Data Mismatch: \n ' + ' '.join(txt)
+ '\nTry using --noise-free or --noisy flags.')
if genericsettings.isFig:
plt.rc("axes", **inset.rcaxeslarger)
plt.rc("xtick", **inset.rcticklarger)
plt.rc("ytick", **inset.rcticklarger)
plt.rc("font", **inset.rcfontlarger)
plt.rc("legend", **inset.rclegendlarger)
plt.rc('pdf', fonttype = 42)
ppfig2.main(dsList0, dsList1, ppfig2_ftarget,
outputdir, genericsettings.verbose)
print "log ERT1/ERT0 vs target function values done."
plt.rc("axes", **inset.rcaxes)
plt.rc("xtick", **inset.rctick)
plt.rc("ytick", **inset.rctick)
plt.rc("font", **inset.rcfont)
plt.rc("legend", **inset.rclegend)
plt.rc('pdf', fonttype = 42)
if genericsettings.isRLDistr:
if len(dictFN0) > 1 or len(dictFN1) > 1:
warnings.warn('Data for functions from both the noisy and ' +
'non-noisy testbeds have been found. Their ' +
'results will be mixed in the "all functions" ' +
'ECDF figures.')
dictDim0 = dsList0.dictByDim()
dictDim1 = dsList1.dictByDim()
# ECDFs of ERT ratios
for dim in set(dictDim0.keys()) & set(dictDim1.keys()):
if dim in inset.rldDimsOfInterest:
# ECDF for all functions altogether
try:
pprldistr2.main(dictDim0[dim], dictDim1[dim], dim,
inset.rldValsOfInterest,
outputdir,
'%02dD_all' % dim,
genericsettings.verbose)
except KeyError:
warnings.warn('Could not find some data in %d-D.'
% (dim))
continue
# ECDFs per function groups
dictFG0 = dictDim0[dim].dictByFuncGroup()
dictFG1 = dictDim1[dim].dictByFuncGroup()
for fGroup in set(dictFG0.keys()) & set(dictFG1.keys()):
pprldistr2.main(dictFG1[fGroup], dictFG0[fGroup], dim,
inset.rldValsOfInterest,
outputdir,
'%02dD_%s' % (dim, fGroup),
genericsettings.verbose)
# ECDFs per noise groups
dictFN0 = dictDim0[dim].dictByNoise()
dictFN1 = dictDim1[dim].dictByNoise()
for fGroup in set(dictFN0.keys()) & set(dictFN1.keys()):
pprldistr2.main(dictFN1[fGroup], dictFN0[fGroup], dim,
inset.rldValsOfInterest,
outputdir,
'%02dD_%s' % (dim, fGroup),
genericsettings.verbose)
prepend_to_file(os.path.join(outputdir,
'bbob_pproc_commands.tex'),
['\\providecommand{\\bbobpprldistrlegendtwo}[1]{',
pprldistr.caption_two(), # depends on the config setting, should depend on maxfevals
'}'
])
print "ECDF runlength ratio graphs done."
for dim in set(dictDim0.keys()) & set(dictDim1.keys()):
pprldistr.fmax = None #Resetting the max final value
pprldistr.evalfmax = None #Resetting the max #fevalsfactor
# ECDFs of all functions altogether
if dim in inset.rldDimsOfInterest:
try:
pprldistr.comp(dictDim1[dim], dictDim0[dim],
inset.rldValsOfInterest, # TODO: let rldVals... possibly be RL-based targets
True,
outputdir, 'all', genericsettings.verbose)
except KeyError:
warnings.warn('Could not find some data in %d-D.'
% (dim))
continue
# ECDFs per function groups
dictFG0 = dictDim0[dim].dictByFuncGroup()
dictFG1 = dictDim1[dim].dictByFuncGroup()
for fGroup in set(dictFG0.keys()) & set(dictFG1.keys()):
pprldistr.comp(dictFG1[fGroup], dictFG0[fGroup],
inset.rldValsOfInterest, True,
outputdir,
'%s' % fGroup, genericsettings.verbose)
# ECDFs per noise groups
dictFN0 = dictDim0[dim].dictByNoise()
dictFN1 = dictDim1[dim].dictByNoise()
for fGroup in set(dictFN0.keys()) & set(dictFN1.keys()):
pprldistr.comp(dictFN1[fGroup], dictFN0[fGroup],
inset.rldValsOfInterest, True,
outputdir,
'%s' % fGroup, genericsettings.verbose)
if genericsettings.isRldOnSingleFcts: # copy-paste from above, here for each function instead of function groups
# ECDFs for each function
pprldmany.all_single_functions(dictAlg, sortedAlgs,
outputdir, genericsettings.verbose)
print "ECDF runlength graphs done."
if genericsettings.isConv:
ppconverrorbars.main(dictAlg, outputdir, genericsettings.verbose)
if genericsettings.isScatter:
if genericsettings.runlength_based_targets:
ppscatter.targets = ppscatter.runlength_based_targets
ppscatter.main(dsList1, dsList0, outputdir,
verbose=genericsettings.verbose)
prepend_to_file(os.path.join(outputdir,
'bbob_pproc_commands.tex'),
['\\providecommand{\\bbobppscatterlegend}[1]{',
ppscatter.figure_caption(),
'}'
])
replace_in_file(os.path.join(outputdir, genericsettings.two_algorithm_file_name + '.html'), '##bbobppscatterlegend##', ppscatter.figure_caption_html())
print "Scatter plots done."
if genericsettings.isTab:
dictNG0 = dsList0.dictByNoise()
dictNG1 = dsList1.dictByNoise()
for nGroup in set(dictNG0.keys()) & set(dictNG1.keys()):
# split table in as many as necessary
dictFunc0 = dictNG0[nGroup].dictByFunc()
dictFunc1 = dictNG1[nGroup].dictByFunc()
funcs = list(set(dictFunc0.keys()) & set(dictFunc1.keys()))
if len(funcs) > 24:
funcs.sort()
nbgroups = int(numpy.ceil(len(funcs)/24.))
def split_seq(seq, nbgroups):
newseq = []
splitsize = 1.0/nbgroups*len(seq)
for i in range(nbgroups):
newseq.append(seq[int(round(i*splitsize)):int(round((i+1)*splitsize))])
return newseq
groups = split_seq(funcs, nbgroups)
# merge
group0 = []
group1 = []
for i, g in enumerate(groups):
tmp0 = DataSetList()
tmp1 = DataSetList()
for f in g:
tmp0.extend(dictFunc0[f])
tmp1.extend(dictFunc1[f])
group0.append(tmp0)
group1.append(tmp1)
for i, g in enumerate(zip(group0, group1)):
pptable2.main(g[0], g[1], inset.tabDimsOfInterest,
outputdir,
'%s%d' % (nGroup, i), genericsettings.verbose)
else:
if 11 < 3: # future handling:
dictFunc0 = dsList0.dictByFunc()
dictFunc1 = dsList1.dictByFunc()
funcs = list(set(dictFunc0.keys()) & set(dictFunc1.keys()))
funcs.sort()
# nbgroups = int(numpy.ceil(len(funcs)/testbedsettings.numberOfFunctions))
# pptable2.main(dsList0, dsList1,
# testbedsettings.tabDimsOfInterest, outputdir,
# '%s' % (testbedsettings.testbedshortname), genericsettings.verbose)
else:
pptable2.main(dictNG0[nGroup], dictNG1[nGroup],
inset.tabDimsOfInterest,
outputdir,
'%s' % (nGroup), genericsettings.verbose)
if isinstance(pptable2.targetsOfInterest, pproc.RunlengthBasedTargetValues):
prepend_to_file(os.path.join(outputdir,
'bbob_pproc_commands.tex'),
['\\providecommand{\\bbobpptablestwolegend}[1]{',
pptable2.table_caption_expensive,
'}'
])
else:
prepend_to_file(os.path.join(outputdir,
'bbob_pproc_commands.tex'),
['\\providecommand{\\bbobpptablestwolegend}[1]{',
pptable2.table_caption,
'}'
])
htmlFileName = os.path.join(outputdir, genericsettings.two_algorithm_file_name + '.html')
key = '##bbobpptablestwolegendexpensive##' if isinstance(pptable2.targetsOfInterest, pproc.RunlengthBasedTargetValues) else '##bbobpptablestwolegend##'
replace_in_file(htmlFileName, '##bbobpptablestwolegend##', htmldesc.getValue(key))
alg0 = set(i[0] for i in dsList0.dictByAlg().keys()).pop().replace(genericsettings.extraction_folder_prefix, '')[0:3]
alg1 = set(i[0] for i in dsList1.dictByAlg().keys()).pop().replace(genericsettings.extraction_folder_prefix, '')[0:3]
replace_in_file(htmlFileName, 'algorithmAshort', alg0)
replace_in_file(htmlFileName, 'algorithmBshort', alg1)
for i, alg in enumerate(args):
replace_in_file(htmlFileName, 'algorithm' + abc[i], str_to_latex(strip_pathname1(alg)))
print "Tables done."
if genericsettings.isScaleUp:
plt.rc("axes", labelsize=20, titlesize=24)
plt.rc("xtick", labelsize=20)
plt.rc("ytick", labelsize=20)
plt.rc("font", size=20)
plt.rc("legend", fontsize=20)
plt.rc('pdf', fonttype = 42)
if genericsettings.runlength_based_targets:
ftarget = RunlengthBasedTargetValues([target_runlength]) # TODO: make this more variable but also consistent
ppfigs.main(dictAlg, genericsettings.two_algorithm_file_name, sortedAlgs, ftarget,
outputdir, genericsettings.verbose)
plt.rcdefaults()
print "Scaling figures done."
if genericsettings.isFig or genericsettings.isRLDistr or genericsettings.isTab or genericsettings.isScatter or genericsettings.isScaleUp:
print "Output data written to folder %s" % outputdir
plt.rcdefaults()
def main(argv=None):
r"""Post-processing COCO data of a single algorithm.
Provided with some data, this routine outputs figure and TeX files
in a folder needed for the compilation of the provided LaTeX templates
for one algorithm (``*article.tex`` or ``*1*.tex``).
The used template file needs to be edited so that the commands
``\bbobdatapath`` and ``\algfolder`` point to the output folder created
by this routine.
These output files will contain performance tables, performance
scaling figures and empirical cumulative distribution figures. On
subsequent executions, new files will be added to the output folder,
overwriting existing older files in the process.
Keyword arguments:
*argv* -- list of strings containing options and arguments. If not
given, sys.argv is accessed.
*argv* should list either names of :file:`info` files or folders
containing :file:`info` files. argv can also contain post-processed
:file:`pickle` files generated by this routine. Furthermore, *argv*
can begin with, in any order, facultative option flags listed below.
-h, --help
displays this message.
-v, --verbose
verbose mode, prints out all operations.
-p, --pickle
generates pickle post processed data files.
-o OUTPUTDIR, --output-dir=OUTPUTDIR
changes the default output directory (:file:`ppdata`) to
:file:`OUTPUTDIR`.
--crafting-effort=VALUE
sets the crafting effort to VALUE (float). Otherwise the
default value of 0. will be used.
--noise-free, --noisy
processes only part of the data.
--settings=SETTINGS
changes the style of the output figures and tables. At the
moment the only differences are in the colors of the output
figures. SETTINGS can be either "grayscale", "color" or
"black-white". The default setting is "color".
--tab-only, --fig-only, --rld-only, --los-only
these options can be used to output respectively the TeX
tables, convergence and ERTs graphs figures, run length
distribution figures, ERT loss ratio figures only. A
combination of any two of these options results in no
output.
--conv
if this option is chosen, additionally convergence plots
for each function and algorithm are generated.
--rld-single-fcts
generate also runlength distribution figures for each
single function.
--expensive
runlength-based f-target values and fixed display limits,
useful with comparatively small budgets. By default the
setting is based on the budget used in the data.
--not-expensive
expensive setting off.
--svg
generate also the svg figures which are used in html files
--runlength-based
runlength-based f-target values, such that the
"level of difficulty" is similar for all functions.
Exceptions raised:
*Usage* -- Gives back a usage message.
Examples:
* Calling the rungeneric1.py interface from the command line::
$ python bbob_pproc/rungeneric1.py -v experiment1
will post-process the folder experiment1 and all its containing
data, base on the .info files found in the folder. The result will
appear in the default output folder. The -v option adds verbosity. ::
$ python bbob_pproc/rungeneric1.py -o exp2 experiment2/*.info
This will execute the post-processing on the info files found in
:file:`experiment2`. The result will be located in the alternative
location :file:`exp2`.
* Loading this package and calling the main from the command line
(requires that the path to this package is in python search path)::
$ python -m bbob_pproc.rungeneric1 -h
This will print out this help message.
* From the python interpreter (requires that the path to this
package is in python search path)::
>> import bbob_pproc as bb
>> bb.rungeneric1.main('-o outputfolder folder1'.split())
This will execute the post-processing on the index files found in
:file:`folder1`. The ``-o`` option changes the output folder from
the default to :file:`outputfolder`.
"""
if argv is None:
argv = sys.argv[1:]
# The zero-th input argument which is the name of the calling script is
# disregarded.
if 1 < 3:
opts, args = getopt.getopt(argv, genericsettings.shortoptlist, genericsettings.longoptlist)
if 11 < 3:
try:
opts, args = getopt.getopt(argv, genericsettings.shortoptlist, genericsettings.longoptlist)
except getopt.error, msg:
raise Usage(msg)
if not (args) and not "--help" in argv and not "h" in argv:
print "not enough input arguments given"
print "cave: the following options also need an argument:"
print [o for o in genericsettings.longoptlist if o[-1] == "="]
print "options given:"
print opts
print "try --help for help"
sys.exit()
# Process options
outputdir = genericsettings.outputdir
for o, a in opts:
if o in ("-v", "--verbose"):
genericsettings.verbose = True
elif o in ("-h", "--help"):
usage()
sys.exit()
elif o in ("-p", "--pickle"):
genericsettings.isPickled = True
elif o in ("-o", "--output-dir"):
outputdir = a
elif o == "--noisy":
genericsettings.isNoisy = True
elif o == "--noise-free":
genericsettings.isNoiseFree = True
# The next 4 are for testing purpose
elif o == "--tab-only":
genericsettings.isFig = False
genericsettings.isRLDistr = False
genericsettings.isLogLoss = False
elif o == "--fig-only":
genericsettings.isTab = False
genericsettings.isRLDistr = False
genericsettings.isLogLoss = False
elif o == "--rld-only":
genericsettings.isTab = False
genericsettings.isFig = False
genericsettings.isLogLoss = False
elif o == "--los-only":
genericsettings.isTab = False
genericsettings.isFig = False
genericsettings.isRLDistr = False
elif o == "--crafting-effort":
try:
genericsettings.inputCrE = float(a)
except ValueError:
raise Usage("Expect a valid float for flag crafting-effort.")
elif o == "--settings":
genericsettings.inputsettings = a
elif o == "--conv":
genericsettings.isConv = True
elif o == "--rld-single-fcts":
genericsettings.isRldOnSingleFcts = True
elif o == "--runlength-based":
genericsettings.runlength_based_targets = True
elif o == "--expensive":
genericsettings.isExpensive = True # comprises runlength-based
elif o == "--not-expensive":
genericsettings.isExpensive = False
elif o == "--svg":
genericsettings.generate_svg_files = True
elif o == "--sca-only":
warnings.warn("option --sca-only will have no effect with rungeneric1.py")
else:
assert False, "unhandled option"
# from bbob_pproc import bbob2010 as inset # input settings
if genericsettings.inputsettings == "color":
from bbob_pproc import genericsettings as inset # input settings
elif genericsettings.inputsettings == "grayscale":
from bbob_pproc import grayscalesettings as inset # input settings
elif genericsettings.inputsettings == "black-white":
from bbob_pproc import bwsettings as inset # input settings
else:
txt = (
"Settings: %s is not an appropriate " % genericsettings.inputsettings
+ 'argument for input flag "--settings".'
)
raise Usage(txt)
if 11 < 3:
from bbob_pproc import config # input settings
config.config(False)
import imp
# import testbedsettings as testbedsettings # input settings
try:
fp, pathname, description = imp.find_module("testbedsettings")
testbedsettings = imp.load_module("testbedsettings", fp, pathname, description)
finally:
fp.close()
if not genericsettings.verbose:
warnings.simplefilter("module")
# warnings.simplefilter('ignore')
# get directory name if outputdir is a archive file
algfolder = findfiles.get_output_directory_subfolder(args[0])
outputdir = os.path.join(outputdir, algfolder)
print ("Post-processing (1): will generate output " + "data in folder %s" % outputdir)
print " this might take several minutes."
filelist = list()
for i in args:
i = i.strip()
if os.path.isdir(i):
filelist.extend(findfiles.main(i, genericsettings.verbose))
elif os.path.isfile(i):
filelist.append(i)
else:
txt = "Input file or folder %s could not be found." % i
print txt
raise Usage(txt)
dsList = DataSetList(filelist, genericsettings.verbose)
if not dsList:
raise Usage("Nothing to do: post-processing stopped.")
if genericsettings.isNoisy and not genericsettings.isNoiseFree:
dsList = dsList.dictByNoise().get("nzall", DataSetList())
if genericsettings.isNoiseFree and not genericsettings.isNoisy:
dsList = dsList.dictByNoise().get("noiselessall", DataSetList())
# compute maxfuneval values
dict_max_fun_evals = {}
for ds in dsList:
dict_max_fun_evals[ds.dim] = np.max((dict_max_fun_evals.setdefault(ds.dim, 0), float(np.max(ds.maxevals))))
from bbob_pproc import config
config.target_values(genericsettings.isExpensive, dict_max_fun_evals)
config.config(dsList.isBiobjective())
if genericsettings.verbose:
for i in dsList:
if dict((j, i.instancenumbers.count(j)) for j in set(i.instancenumbers)) != inset.instancesOfInterest:
warnings.warn(
"The data of %s do not list " % (i) + "the correct instances " + "of function F%d." % (i.funcId)
)
dictAlg = dsList.dictByAlg()
if len(dictAlg) > 1:
warnings.warn("Data with multiple algId %s " % str(dictAlg.keys()) + "will be processed together.")
# TODO: in this case, all is well as long as for a given problem
# (given dimension and function) there is a single instance of
# DataSet associated. If there are more than one, the first one only
# will be considered... which is probably not what one would expect.
# TODO: put some errors where this case would be a problem.
# raise Usage?
if genericsettings.isFig or genericsettings.isTab or genericsettings.isRLDistr or genericsettings.isLogLoss:
if not os.path.exists(outputdir):
os.makedirs(outputdir)
if genericsettings.verbose:
print "Folder %s was created." % (outputdir)
if genericsettings.isPickled:
dsList.pickle(verbose=genericsettings.verbose)
if genericsettings.isConv:
ppconverrorbars.main(dictAlg, outputdir, genericsettings.verbose)
if genericsettings.isFig:
print "Scaling figures...",
sys.stdout.flush()
# ERT/dim vs dim.
plt.rc("axes", **inset.rcaxeslarger)
plt.rc("xtick", **inset.rcticklarger)
plt.rc("ytick", **inset.rcticklarger)
plt.rc("font", **inset.rcfontlarger)
plt.rc("legend", **inset.rclegendlarger)
plt.rc("pdf", fonttype=42)
ppfigdim.main(dsList, ppfigdim.values_of_interest, outputdir, genericsettings.verbose)
plt.rcdefaults()
print_done()
plt.rc("axes", **inset.rcaxes)
plt.rc("xtick", **inset.rctick)
plt.rc("ytick", **inset.rctick)
plt.rc("font", **inset.rcfont)
plt.rc("legend", **inset.rclegend)
plt.rc("pdf", fonttype=42)
if genericsettings.isTab:
print "TeX tables...",
sys.stdout.flush()
dictNoise = dsList.dictByNoise()
for noise, sliceNoise in dictNoise.iteritems():
pptable.main(sliceNoise, inset.tabDimsOfInterest, outputdir, noise, genericsettings.verbose)
print_done()
if genericsettings.isRLDistr:
print "ECDF graphs...",
sys.stdout.flush()
dictNoise = dsList.dictByNoise()
if len(dictNoise) > 1:
warnings.warn(
"Data for functions from both the noisy and "
"non-noisy testbeds have been found. Their "
'results will be mixed in the "all functions" '
"ECDF figures."
)
dictDim = dsList.dictByDim()
for dim in inset.rldDimsOfInterest:
try:
sliceDim = dictDim[dim]
except KeyError:
continue
pprldistr.main(sliceDim, True, outputdir, "all", genericsettings.verbose)
dictNoise = sliceDim.dictByNoise()
for noise, sliceNoise in dictNoise.iteritems():
pprldistr.main(sliceNoise, True, outputdir, "%s" % noise, genericsettings.verbose)
dictFG = sliceDim.dictByFuncGroup()
for fGroup, sliceFuncGroup in dictFG.items():
pprldistr.main(sliceFuncGroup, True, outputdir, "%s" % fGroup, genericsettings.verbose)
pprldistr.fmax = None # Resetting the max final value
pprldistr.evalfmax = None # Resetting the max #fevalsfactor
if (
genericsettings.isRldOnSingleFcts
): # copy-paste from above, here for each function instead of function groups
# ECDFs for each function
pprldmany.all_single_functions(dictAlg, None, outputdir, genericsettings.verbose)
print_done()
if genericsettings.isLogLoss:
print "ERT loss ratio figures and tables...",
sys.stdout.flush()
for ng, sliceNoise in dsList.dictByNoise().iteritems():
if ng == "noiselessall":
testbed = "noiseless"
elif ng == "nzall":
testbed = "noisy"
txt = "Please input crafting effort value " + "for %s testbed:\n CrE = " % testbed
CrE = genericsettings.inputCrE
while CrE is None:
try:
CrE = float(raw_input(txt))
except (SyntaxError, NameError, ValueError):
print "Float value required."
dictDim = sliceNoise.dictByDim()
for d in inset.rldDimsOfInterest:
try:
sliceDim = dictDim[d]
except KeyError:
continue
info = "%s" % ng
pplogloss.main(sliceDim, CrE, True, outputdir, info, verbose=genericsettings.verbose)
pplogloss.generateTable(sliceDim, CrE, outputdir, info, verbose=genericsettings.verbose)
for fGroup, sliceFuncGroup in sliceDim.dictByFuncGroup().iteritems():
info = "%s" % fGroup
pplogloss.main(sliceFuncGroup, CrE, True, outputdir, info, verbose=genericsettings.verbose)
pplogloss.evalfmax = None # Resetting the max #fevalsfactor
print_done()
latex_commands_file = os.path.join(outputdir.split(os.sep)[0], "bbob_pproc_commands.tex")
html_file = os.path.join(outputdir, genericsettings.single_algorithm_file_name + ".html")
prepend_to_file(
latex_commands_file, ["\\providecommand{\\bbobloglosstablecaption}[1]{", pplogloss.table_caption, "}"]
)
prepend_to_file(
latex_commands_file, ["\\providecommand{\\bbobloglossfigurecaption}[1]{", pplogloss.figure_caption, "}"]
)
prepend_to_file(
latex_commands_file,
[
"\\providecommand{\\bbobpprldistrlegend}[1]{",
pprldistr.caption_single(
np.max([val / dim for dim, val in dict_max_fun_evals.iteritems()])
), # depends on the config setting, should depend on maxfevals
"}",
],
)
replace_in_file(
html_file,
r"TOBEREPLACED",
"D, ".join([str(i) for i in pprldistr.single_runlength_factors[:6]]) + "D,…",
)
prepend_to_file(
latex_commands_file, ["\\providecommand{\\bbobppfigdimlegend}[1]{", ppfigdim.scaling_figure_caption(), "}"]
)
prepend_to_file(latex_commands_file, ["\\providecommand{\\bbobpptablecaption}[1]{", pptable.table_caption, "}"])
prepend_to_file(latex_commands_file, ["\\providecommand{\\algfolder}{" + algfolder + "/}"])
prepend_to_file(
latex_commands_file,
[
"\\providecommand{\\algname}{"
+ (str_to_latex(strip_pathname1(args[0])) if len(args) == 1 else str_to_latex(dsList[0].algId))
+ "{}}"
],
)
if genericsettings.isFig or genericsettings.isTab or genericsettings.isRLDistr or genericsettings.isLogLoss:
print "Output data written to folder %s" % outputdir
plt.rcdefaults()
def main(argv=None):
r"""Routine for post-processing COCO data from two algorithms.
Provided with some data, this routine outputs figure and TeX files
in a folder needed for the compilation of the provided LaTeX templates
for comparing two algorithms (``*cmp.tex`` or ``*2*.tex``).
The used template file needs to be edited so that the command
``\bbobdatapath`` points to the output folder created by this routine.
The output files will contain performance tables, performance
scaling figures and empirical cumulative distribution figures. On
subsequent executions, new files will be added to the output folder,
overwriting existing older files in the process.
Keyword arguments:
*argv* -- list of strings containing options and arguments. If not
given, sys.argv is accessed.
*argv* must list folders containing BBOB data files. Each of these
folders should correspond to the data of ONE algorithm.
Furthermore, argv can begin with, in any order, facultative option
flags listed below.
-h, --help
displays this message.
-v, --verbose
verbose mode, prints out operations.
-o OUTPUTDIR, --output-dir=OUTPUTDIR
changes the default output directory (:file:`ppdata`) to
:file:`OUTPUTDIR`
--noise-free, --noisy
processes only part of the data.
--settings=SETTING
changes the style of the output figures and tables. At the
moment only the only differences are in the colors of the
output figures. SETTING can be either "grayscale", "color"
or "black-white". The default setting is "color".
--fig-only, --rld-only, --tab-only, --sca-only
these options can be used to output respectively the ERT
graphs figures, run length distribution figures or the
comparison tables scatter plot figures only. Any combination
of these options results in no output.
--conv
if this option is chosen, additionally convergence
plots for each function and algorithm are generated.
--rld-single-fcts
generate also runlength distribution figures for each
single function.
--expensive
runlength-based f-target values and fixed display limits,
useful with comparatively small budgets. By default the
setting is based on the budget used in the data.
--not-expensive
expensive setting off.
--svg
generate also the svg figures which are used in html files
Exceptions raised:
*Usage* -- Gives back a usage message.
Examples:
* Calling the rungeneric2.py interface from the command line::
$ python bbob_pproc/rungeneric2.py -v Alg0-baseline Alg1-of-interest
will post-process the data from folders :file:`Alg0-baseline` and
:file:`Alg1-of-interest`, the former containing data for the
reference algorithm (zero-th) and the latter data for the
algorithm of concern (first). The results will be output in the
default output folder. The ``-v`` option adds verbosity.
* From the python interpreter (requires that the path to this
package is in python search path)::
>> import bbob_pproc as bb
>> bb.rungeneric2.main('-o outputfolder PSO DEPSO'.split())
This will execute the post-processing on the data found in folder
:file:`PSO` and :file:`DEPSO`. The ``-o`` option changes the output
folder from the default to :file:`outputfolder`.
"""
if argv is None:
argv = sys.argv[1:]
# The zero-th input argument which is the name of the calling script is
# disregarded.
global ftarget
try:
try:
opts, args = getopt.getopt(argv, genericsettings.shortoptlist,
genericsettings.longoptlist)
except getopt.error, msg:
raise Usage(msg)
if not (args):
usage()
sys.exit()
#Process options
outputdir = genericsettings.outputdir
for o, a in opts:
if o in ("-v", "--verbose"):
genericsettings.verbose = True
elif o in ("-h", "--help"):
usage()
sys.exit()
elif o in ("-o", "--output-dir"):
outputdir = a
elif o == "--fig-only":
genericsettings.isRLDistr = False
genericsettings.isTab = False
genericsettings.isScatter = False
elif o == "--rld-only":
genericsettings.isFig = False
genericsettings.isTab = False
genericsettings.isScatter = False
elif o == "--tab-only":
genericsettings.isFig = False
genericsettings.isRLDistr = False
genericsettings.isScatter = False
elif o == "--sca-only":
genericsettings.isFig = False
genericsettings.isRLDistr = False
genericsettings.isTab = False
elif o == "--noisy":
genericsettings.isNoisy = True
elif o == "--noise-free":
genericsettings.isNoiseFree = True
elif o == "--settings":
genericsettings.inputsettings = a
elif o == "--conv":
genericsettings.isConv = True
elif o == "--rld-single-fcts":
genericsettings.isRldOnSingleFcts = True
elif o == "--runlength-based":
genericsettings.runlength_based_targets = True
elif o == "--expensive":
genericsettings.isExpensive = True # comprises runlength-based
elif o == "--not-expensive":
genericsettings.isExpensive = False
elif o == "--svg":
genericsettings.generate_svg_files = True
elif o == "--los-only":
warnings.warn(
"option --los-only will have no effect with rungeneric2.py"
)
elif o == "--crafting-effort=":
warnings.warn(
"option --crafting-effort will have no effect with rungeneric2.py"
)
elif o in ("-p", "--pickle"):
warnings.warn(
"option --pickle will have no effect with rungeneric2.py")
else:
assert False, "unhandled option"
# from bbob_pproc import bbob2010 as inset # input settings
if genericsettings.inputsettings == "color":
from bbob_pproc import genericsettings as inset # input settings
config.config()
elif genericsettings.inputsettings == "grayscale": # probably very much obsolete
from bbob_pproc import grayscalesettings as inset # input settings
elif genericsettings.inputsettings == "black-white": # probably very much obsolete
from bbob_pproc import bwsettings as inset # input settings
else:
txt = ('Settings: %s is not an appropriate ' %
genericsettings.inputsettings +
'argument for input flag "--settings".')
raise Usage(txt)
if (not genericsettings.verbose):
warnings.simplefilter('module')
warnings.simplefilter('ignore')
print("Post-processing will generate comparison " +
"data in folder %s" % outputdir)
print " this might take several minutes."
dsList, sortedAlgs, dictAlg = processInputArgs(
args, verbose=genericsettings.verbose)
if 1 < 3 and len(sortedAlgs) != 2:
raise ValueError(
'rungeneric2.py needs exactly two algorithms to compare, found: '
+ str(sortedAlgs) +
'\n use rungeneric.py (or rungenericmany.py) to compare more algorithms. '
)
if not dsList:
sys.exit()
for i in dictAlg:
if genericsettings.isNoisy and not genericsettings.isNoiseFree:
dictAlg[i] = dictAlg[i].dictByNoise().get(
'nzall', DataSetList())
if genericsettings.isNoiseFree and not genericsettings.isNoisy:
dictAlg[i] = dictAlg[i].dictByNoise().get(
'noiselessall', DataSetList())
for i in dsList:
if i.dim not in genericsettings.dimensions_to_display:
continue
if (dict((j, i.instancenumbers.count(j))
for j in set(i.instancenumbers)) <
inset.instancesOfInterest):
warnings.warn('The data of %s do not list ' % (i) +
'the correct instances ' + 'of function F%d.' %
(i.funcId))
if len(sortedAlgs) < 2:
raise Usage('Expect data from two different algorithms, could ' +
'only find one.')
elif len(sortedAlgs) > 2:
warnings.warn('Data from folders: %s ' % (sortedAlgs) +
'were found, the first two will be processed.')
# Group by algorithm
dsList0 = dictAlg[sortedAlgs[0]]
if not dsList0:
raise Usage('Could not find data for algorithm %s.' %
(sortedAlgs[0]))
dsList1 = dictAlg[sortedAlgs[1]]
if not dsList1:
raise Usage('Could not find data for algorithm %s.' %
(sortedAlgs[0]))
# get the name of each algorithm from the input arguments
tmppath0, alg0name = os.path.split(sortedAlgs[0].rstrip(os.sep))
tmppath1, alg1name = os.path.split(sortedAlgs[1].rstrip(os.sep))
for i in dsList0:
i.algId = alg0name
for i in dsList1:
i.algId = alg1name
# compute maxfuneval values
dict_max_fun_evals1 = {}
dict_max_fun_evals2 = {}
for ds in dsList0:
dict_max_fun_evals1[ds.dim] = np.max(
(dict_max_fun_evals1.setdefault(ds.dim, 0),
float(np.max(ds.maxevals))))
for ds in dsList1:
dict_max_fun_evals2[ds.dim] = np.max(
(dict_max_fun_evals2.setdefault(ds.dim, 0),
float(np.max(ds.maxevals))))
config.target_values(
genericsettings.isExpensive, {
1:
min([
max([
val / dim
for dim, val in dict_max_fun_evals1.iteritems()
]),
max([
val / dim
for dim, val in dict_max_fun_evals2.iteritems()
])
])
})
config.config()
######################### Post-processing #############################
if genericsettings.isFig or genericsettings.isRLDistr or genericsettings.isTab or genericsettings.isScatter:
if not os.path.exists(outputdir):
os.mkdir(outputdir)
if genericsettings.verbose:
print 'Folder %s was created.' % (outputdir)
# prepend the algorithm name command to the tex-command file
abc = 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'
lines = []
for i, alg in enumerate(args):
lines.append('\\providecommand{\\algorithm' + abc[i] + '}{' +
str_to_latex(strip_pathname1(alg)) + '}')
prepend_to_file(
os.path.join(outputdir,
'bbob_pproc_commands.tex'), lines, 1000,
'bbob_proc_commands.tex truncated, consider removing the file before the text run'
)
# Check whether both input arguments list noisy and noise-free data
dictFN0 = dsList0.dictByNoise()
dictFN1 = dsList1.dictByNoise()
k0 = set(dictFN0.keys())
k1 = set(dictFN1.keys())
symdiff = k1 ^ k0 # symmetric difference
if symdiff:
tmpdict = {}
for i, noisegrp in enumerate(symdiff):
if noisegrp == 'nzall':
tmp = 'noisy'
elif noisegrp == 'noiselessall':
tmp = 'noiseless'
if dictFN0.has_key(noisegrp):
tmp2 = sortedAlgs[0]
elif dictFN1.has_key(noisegrp):
tmp2 = sortedAlgs[1]
tmpdict.setdefault(tmp2, []).append(tmp)
txt = []
for i, j in tmpdict.iteritems():
txt.append('Only input folder %s lists %s data.' %
(i, ' and '.join(j)))
raise Usage('Data Mismatch: \n ' + ' '.join(txt) +
'\nTry using --noise-free or --noisy flags.')
if genericsettings.isFig:
plt.rc("axes", **inset.rcaxeslarger)
plt.rc("xtick", **inset.rcticklarger)
plt.rc("ytick", **inset.rcticklarger)
plt.rc("font", **inset.rcfontlarger)
plt.rc("legend", **inset.rclegendlarger)
plt.rc('pdf', fonttype=42)
ppfig2.main(dsList0, dsList1, ppfig2_ftarget, outputdir,
genericsettings.verbose)
print "log ERT1/ERT0 vs target function values done."
plt.rc("axes", **inset.rcaxes)
plt.rc("xtick", **inset.rctick)
plt.rc("ytick", **inset.rctick)
plt.rc("font", **inset.rcfont)
plt.rc("legend", **inset.rclegend)
plt.rc('pdf', fonttype=42)
if genericsettings.isRLDistr:
if len(dictFN0) > 1 or len(dictFN1) > 1:
warnings.warn('Data for functions from both the noisy and ' +
'non-noisy testbeds have been found. Their ' +
'results will be mixed in the "all functions" ' +
'ECDF figures.')
dictDim0 = dsList0.dictByDim()
dictDim1 = dsList1.dictByDim()
# ECDFs of ERT ratios
for dim in set(dictDim0.keys()) & set(dictDim1.keys()):
if dim in inset.rldDimsOfInterest:
# ECDF for all functions altogether
try:
pprldistr2.main(dictDim0[dim], dictDim1[dim], dim,
inset.rldValsOfInterest, outputdir,
'%02dD_all' % dim,
genericsettings.verbose)
except KeyError:
warnings.warn('Could not find some data in %d-D.' %
(dim))
continue
# ECDFs per function groups
dictFG0 = dictDim0[dim].dictByFuncGroup()
dictFG1 = dictDim1[dim].dictByFuncGroup()
for fGroup in set(dictFG0.keys()) & set(dictFG1.keys()):
pprldistr2.main(dictFG1[fGroup], dictFG0[fGroup], dim,
inset.rldValsOfInterest, outputdir,
'%02dD_%s' % (dim, fGroup),
genericsettings.verbose)
# ECDFs per noise groups
dictFN0 = dictDim0[dim].dictByNoise()
dictFN1 = dictDim1[dim].dictByNoise()
for fGroup in set(dictFN0.keys()) & set(dictFN1.keys()):
pprldistr2.main(dictFN1[fGroup], dictFN0[fGroup], dim,
inset.rldValsOfInterest, outputdir,
'%02dD_%s' % (dim, fGroup),
genericsettings.verbose)
prepend_to_file(
os.path.join(outputdir, 'bbob_pproc_commands.tex'),
[
'\\providecommand{\\bbobpprldistrlegendtwo}[1]{',
pprldistr.caption_two(
), # depends on the config setting, should depend on maxfevals
'}'
])
print "ECDF runlength ratio graphs done."
for dim in set(dictDim0.keys()) & set(dictDim1.keys()):
pprldistr.fmax = None #Resetting the max final value
pprldistr.evalfmax = None #Resetting the max #fevalsfactor
# ECDFs of all functions altogether
if dim in inset.rldDimsOfInterest:
try:
pprldistr.comp(
dictDim1[dim],
dictDim0[dim],
inset.
rldValsOfInterest, # TODO: let rldVals... possibly be RL-based targets
True,
outputdir,
'all',
genericsettings.verbose)
except KeyError:
warnings.warn('Could not find some data in %d-D.' %
(dim))
continue
# ECDFs per function groups
dictFG0 = dictDim0[dim].dictByFuncGroup()
dictFG1 = dictDim1[dim].dictByFuncGroup()
for fGroup in set(dictFG0.keys()) & set(dictFG1.keys()):
pprldistr.comp(dictFG1[fGroup], dictFG0[fGroup],
inset.rldValsOfInterest, True,
outputdir, '%s' % fGroup,
genericsettings.verbose)
# ECDFs per noise groups
dictFN0 = dictDim0[dim].dictByNoise()
dictFN1 = dictDim1[dim].dictByNoise()
for fGroup in set(dictFN0.keys()) & set(dictFN1.keys()):
pprldistr.comp(dictFN1[fGroup], dictFN0[fGroup],
inset.rldValsOfInterest, True,
outputdir, '%s' % fGroup,
genericsettings.verbose)
if genericsettings.isRldOnSingleFcts: # copy-paste from above, here for each function instead of function groups
# ECDFs for each function
pprldmany.all_single_functions(dictAlg, sortedAlgs, outputdir,
genericsettings.verbose)
print "ECDF runlength graphs done."
if genericsettings.isConv:
ppconverrorbars.main(dictAlg, outputdir, genericsettings.verbose)
if genericsettings.isScatter:
if genericsettings.runlength_based_targets:
ppscatter.targets = ppscatter.runlength_based_targets
ppscatter.main(dsList1,
dsList0,
outputdir,
verbose=genericsettings.verbose)
prepend_to_file(os.path.join(outputdir, 'bbob_pproc_commands.tex'),
[
'\\providecommand{\\bbobppscatterlegend}[1]{',
ppscatter.figure_caption(), '}'
])
replace_in_file(
os.path.join(outputdir,
genericsettings.two_algorithm_file_name +
'.html'), '##bbobppscatterlegend##',
ppscatter.figure_caption_html())
print "Scatter plots done."
if genericsettings.isTab:
dictNG0 = dsList0.dictByNoise()
dictNG1 = dsList1.dictByNoise()
for nGroup in set(dictNG0.keys()) & set(dictNG1.keys()):
# split table in as many as necessary
dictFunc0 = dictNG0[nGroup].dictByFunc()
dictFunc1 = dictNG1[nGroup].dictByFunc()
funcs = list(set(dictFunc0.keys()) & set(dictFunc1.keys()))
if len(funcs) > 24:
funcs.sort()
nbgroups = int(numpy.ceil(len(funcs) / 24.))
def split_seq(seq, nbgroups):
newseq = []
splitsize = 1.0 / nbgroups * len(seq)
for i in range(nbgroups):
newseq.append(
seq[int(round(i * splitsize)
):int(round((i + 1) * splitsize))])
return newseq
groups = split_seq(funcs, nbgroups)
# merge
group0 = []
group1 = []
for i, g in enumerate(groups):
tmp0 = DataSetList()
tmp1 = DataSetList()
for f in g:
tmp0.extend(dictFunc0[f])
tmp1.extend(dictFunc1[f])
group0.append(tmp0)
group1.append(tmp1)
for i, g in enumerate(zip(group0, group1)):
pptable2.main(g[0], g[1], inset.tabDimsOfInterest,
outputdir, '%s%d' % (nGroup, i),
genericsettings.verbose)
else:
if 11 < 3: # future handling:
dictFunc0 = dsList0.dictByFunc()
dictFunc1 = dsList1.dictByFunc()
funcs = list(
set(dictFunc0.keys()) & set(dictFunc1.keys()))
funcs.sort()
# nbgroups = int(numpy.ceil(len(funcs)/testbedsettings.numberOfFunctions))
# pptable2.main(dsList0, dsList1,
# testbedsettings.tabDimsOfInterest, outputdir,
# '%s' % (testbedsettings.testbedshortname), genericsettings.verbose)
else:
pptable2.main(dictNG0[nGroup], dictNG1[nGroup],
inset.tabDimsOfInterest, outputdir,
'%s' % (nGroup), genericsettings.verbose)
if isinstance(pptable2.targetsOfInterest,
pproc.RunlengthBasedTargetValues):
prepend_to_file(
os.path.join(outputdir, 'bbob_pproc_commands.tex'), [
'\\providecommand{\\bbobpptablestwolegend}[1]{',
pptable2.table_caption_expensive, '}'
])
else:
prepend_to_file(
os.path.join(outputdir, 'bbob_pproc_commands.tex'), [
'\\providecommand{\\bbobpptablestwolegend}[1]{',
pptable2.table_caption, '}'
])
htmlFileName = os.path.join(
outputdir, genericsettings.two_algorithm_file_name + '.html')
key = '##bbobpptablestwolegendexpensive##' if isinstance(
pptable2.targetsOfInterest, pproc.RunlengthBasedTargetValues
) else '##bbobpptablestwolegend##'
replace_in_file(htmlFileName, '##bbobpptablestwolegend##',
htmldesc.getValue(key))
alg0 = set(i[0] for i in dsList0.dictByAlg().keys()).pop().replace(
genericsettings.extraction_folder_prefix, '')[0:3]
alg1 = set(i[0] for i in dsList1.dictByAlg().keys()).pop().replace(
genericsettings.extraction_folder_prefix, '')[0:3]
replace_in_file(htmlFileName, 'algorithmAshort', alg0)
replace_in_file(htmlFileName, 'algorithmBshort', alg1)
for i, alg in enumerate(args):
replace_in_file(htmlFileName, 'algorithm' + abc[i],
str_to_latex(strip_pathname1(alg)))
print "Tables done."
if genericsettings.isScaleUp:
plt.rc("axes", labelsize=20, titlesize=24)
plt.rc("xtick", labelsize=20)
plt.rc("ytick", labelsize=20)
plt.rc("font", size=20)
plt.rc("legend", fontsize=20)
plt.rc('pdf', fonttype=42)
if genericsettings.runlength_based_targets:
ftarget = RunlengthBasedTargetValues([
target_runlength
]) # TODO: make this more variable but also consistent
ppfigs.main(dictAlg, genericsettings.two_algorithm_file_name,
sortedAlgs, ftarget, outputdir,
genericsettings.verbose)
plt.rcdefaults()
print "Scaling figures done."
if genericsettings.isFig or genericsettings.isRLDistr or genericsettings.isTab or genericsettings.isScatter or genericsettings.isScaleUp:
print "Output data written to folder %s" % outputdir
plt.rcdefaults()
def main(argv=None):
r"""Post-processing COCO data of a single algorithm.
Provided with some data, this routine outputs figure and TeX files
in a folder needed for the compilation of the provided LaTeX templates
for one algorithm (``*article.tex`` or ``*1*.tex``).
The used template file needs to be edited so that the commands
``\bbobdatapath`` and ``\algfolder`` point to the output folder created
by this routine.
These output files will contain performance tables, performance
scaling figures and empirical cumulative distribution figures. On
subsequent executions, new files will be added to the output folder,
overwriting existing older files in the process.
Keyword arguments:
*argv* -- list of strings containing options and arguments. If not
given, sys.argv is accessed.
*argv* should list either names of :file:`info` files or folders
containing :file:`info` files. argv can also contain post-processed
:file:`pickle` files generated by this routine. Furthermore, *argv*
can begin with, in any order, facultative option flags listed below.
-h, --help
displays this message.
-v, --verbose
verbose mode, prints out all operations.
-p, --pickle
generates pickle post processed data files.
-o OUTPUTDIR, --output-dir=OUTPUTDIR
changes the default output directory (:file:`ppdata`) to
:file:`OUTPUTDIR`.
--crafting-effort=VALUE
sets the crafting effort to VALUE (float). Otherwise the
default value of 0. will be used.
--noise-free, --noisy
processes only part of the data.
--settings=SETTINGS
changes the style of the output figures and tables. At the
moment the only differences are in the colors of the output
figures. SETTINGS can be either "grayscale", "color" or
"black-white". The default setting is "color".
--tab-only, --fig-only, --rld-only, --los-only
these options can be used to output respectively the TeX
tables, convergence and ERTs graphs figures, run length
distribution figures, ERT loss ratio figures only. A
combination of any two of these options results in no
output.
--conv
if this option is chosen, additionally convergence plots
for each function and algorithm are generated.
--rld-single-fcts
generate also runlength distribution figures for each
single function.
--expensive
runlength-based f-target values and fixed display limits,
useful with comparatively small budgets. By default the
setting is based on the budget used in the data.
--not-expensive
expensive setting off.
--svg
generate also the svg figures which are used in html files
--runlength-based
runlength-based f-target values, such that the
"level of difficulty" is similar for all functions.
Exceptions raised:
*Usage* -- Gives back a usage message.
Examples:
* Calling the rungeneric1.py interface from the command line::
$ python bbob_pproc/rungeneric1.py -v experiment1
will post-process the folder experiment1 and all its containing
data, base on the .info files found in the folder. The result will
appear in the default output folder. The -v option adds verbosity. ::
$ python bbob_pproc/rungeneric1.py -o exp2 experiment2/*.info
This will execute the post-processing on the info files found in
:file:`experiment2`. The result will be located in the alternative
location :file:`exp2`.
* Loading this package and calling the main from the command line
(requires that the path to this package is in python search path)::
$ python -m bbob_pproc.rungeneric1 -h
This will print out this help message.
* From the python interpreter (requires that the path to this
package is in python search path)::
>> import bbob_pproc as bb
>> bb.rungeneric1.main('-o outputfolder folder1'.split())
This will execute the post-processing on the index files found in
:file:`folder1`. The ``-o`` option changes the output folder from
the default to :file:`outputfolder`.
"""
if argv is None:
argv = sys.argv[1:]
# The zero-th input argument which is the name of the calling script is
# disregarded.
if 1 < 3:
opts, args = getopt.getopt(argv, genericsettings.shortoptlist, genericsettings.longoptlist)
if 11 < 3:
try:
opts, args = getopt.getopt(argv, genericsettings.shortoptlist, genericsettings.longoptlist)
except getopt.error, msg:
raise Usage(msg)
if not (args) and not '--help' in argv and not 'h' in argv:
print 'not enough input arguments given'
print 'cave: the following options also need an argument:'
print [o for o in genericsettings.longoptlist if o[-1] == '=']
print 'options given:'
print opts
print 'try --help for help'
sys.exit()
# Process options
outputdir = genericsettings.outputdir
for o, a in opts:
if o in ("-v", "--verbose"):
genericsettings.verbose = True
elif o in ("-h", "--help"):
usage()
sys.exit()
elif o in ("-p", "--pickle"):
genericsettings.isPickled = True
elif o in ("-o", "--output-dir"):
outputdir = a
elif o == "--noisy":
genericsettings.isNoisy = True
elif o == "--noise-free":
genericsettings.isNoiseFree = True
# The next 4 are for testing purpose
elif o == "--tab-only":
genericsettings.isFig = False
genericsettings.isRLDistr = False
genericsettings.isLogLoss = False
elif o == "--fig-only":
genericsettings.isTab = False
genericsettings.isRLDistr = False
genericsettings.isLogLoss = False
elif o == "--rld-only":
genericsettings.isTab = False
genericsettings.isFig = False
genericsettings.isLogLoss = False
elif o == "--los-only":
genericsettings.isTab = False
genericsettings.isFig = False
genericsettings.isRLDistr = False
elif o == "--crafting-effort":
try:
genericsettings.inputCrE = float(a)
except ValueError:
raise Usage('Expect a valid float for flag crafting-effort.')
elif o == "--settings":
genericsettings.inputsettings = a
elif o == "--conv":
genericsettings.isConv = True
elif o == "--rld-single-fcts":
genericsettings.isRldOnSingleFcts = True
elif o == "--runlength-based":
genericsettings.runlength_based_targets = True
elif o == "--expensive":
genericsettings.isExpensive = True # comprises runlength-based
elif o == "--not-expensive":
genericsettings.isExpensive = False
elif o == "--svg":
genericsettings.generate_svg_files = True
elif o == "--sca-only":
warnings.warn("option --sca-only will have no effect with rungeneric1.py")
else:
assert False, "unhandled option"
# from bbob_pproc import bbob2010 as inset # input settings
if genericsettings.inputsettings == "color":
from bbob_pproc import genericsettings as inset # input settings
elif genericsettings.inputsettings == "grayscale":
from bbob_pproc import grayscalesettings as inset # input settings
elif genericsettings.inputsettings == "black-white":
from bbob_pproc import bwsettings as inset # input settings
else:
txt = ('Settings: %s is not an appropriate ' % genericsettings.inputsettings
+ 'argument for input flag "--settings".')
raise Usage(txt)
if 11 < 3:
from bbob_pproc import config # input settings
config.config()
import imp
# import testbedsettings as testbedsettings # input settings
try:
fp, pathname, description = imp.find_module("testbedsettings")
testbedsettings = imp.load_module("testbedsettings", fp, pathname, description)
finally:
fp.close()
if (not genericsettings.verbose):
warnings.simplefilter('module')
# warnings.simplefilter('ignore')
#get directory name if outputdir is a archive file
algfolder = findfiles.get_output_directory_subfolder(args[0])
outputdir = os.path.join(outputdir, algfolder)
print ("Post-processing (1): will generate output " +
"data in folder %s" % outputdir)
print " this might take several minutes."
filelist = list()
for i in args:
i = i.strip()
if os.path.isdir(i):
filelist.extend(findfiles.main(i, genericsettings.verbose))
elif os.path.isfile(i):
filelist.append(i)
else:
txt = 'Input file or folder %s could not be found.' % i
print txt
raise Usage(txt)
dsList = DataSetList(filelist, genericsettings.verbose)
if not dsList:
raise Usage("Nothing to do: post-processing stopped.")
if genericsettings.isNoisy and not genericsettings.isNoiseFree:
dsList = dsList.dictByNoise().get('nzall', DataSetList())
if genericsettings.isNoiseFree and not genericsettings.isNoisy:
dsList = dsList.dictByNoise().get('noiselessall', DataSetList())
# compute maxfuneval values
dict_max_fun_evals = {}
for ds in dsList:
dict_max_fun_evals[ds.dim] = np.max((dict_max_fun_evals.setdefault(ds.dim, 0), float(np.max(ds.maxevals))))
from bbob_pproc import config
config.target_values(genericsettings.isExpensive, dict_max_fun_evals)
config.config()
if (genericsettings.verbose):
for i in dsList:
if (dict((j, i.instancenumbers.count(j)) for j in set(i.instancenumbers)) !=
inset.instancesOfInterest):
warnings.warn('The data of %s do not list ' % (i) +
'the correct instances ' +
'of function F%d.' % (i.funcId))
dictAlg = dsList.dictByAlg()
if len(dictAlg) > 1:
warnings.warn('Data with multiple algId %s ' % str(dictAlg.keys()) +
'will be processed together.')
# TODO: in this case, all is well as long as for a given problem
# (given dimension and function) there is a single instance of
# DataSet associated. If there are more than one, the first one only
# will be considered... which is probably not what one would expect.
# TODO: put some errors where this case would be a problem.
# raise Usage?
if genericsettings.isFig or genericsettings.isTab or genericsettings.isRLDistr or genericsettings.isLogLoss:
if not os.path.exists(outputdir):
os.makedirs(outputdir)
if genericsettings.verbose:
print 'Folder %s was created.' % (outputdir)
if genericsettings.isPickled:
dsList.pickle(verbose=genericsettings.verbose)
if genericsettings.isConv:
ppconverrorbars.main(dictAlg, outputdir, genericsettings.verbose)
if genericsettings.isFig:
print "Scaling figures...",
sys.stdout.flush()
# ERT/dim vs dim.
plt.rc("axes", **inset.rcaxeslarger)
plt.rc("xtick", **inset.rcticklarger)
plt.rc("ytick", **inset.rcticklarger)
plt.rc("font", **inset.rcfontlarger)
plt.rc("legend", **inset.rclegendlarger)
plt.rc('pdf', fonttype = 42)
ppfigdim.main(dsList, ppfigdim.values_of_interest,
outputdir, genericsettings.verbose)
plt.rcdefaults()
print_done()
plt.rc("axes", **inset.rcaxes)
plt.rc("xtick", **inset.rctick)
plt.rc("ytick", **inset.rctick)
plt.rc("font", **inset.rcfont)
plt.rc("legend", **inset.rclegend)
plt.rc('pdf', fonttype = 42)
if genericsettings.isTab:
print "TeX tables...",
sys.stdout.flush()
dictNoise = dsList.dictByNoise()
for noise, sliceNoise in dictNoise.iteritems():
pptable.main(sliceNoise, inset.tabDimsOfInterest,
outputdir, noise, genericsettings.verbose)
print_done()
if genericsettings.isRLDistr:
print "ECDF graphs...",
sys.stdout.flush()
dictNoise = dsList.dictByNoise()
if len(dictNoise) > 1:
warnings.warn('Data for functions from both the noisy and '
'non-noisy testbeds have been found. Their '
'results will be mixed in the "all functions" '
'ECDF figures.')
dictDim = dsList.dictByDim()
for dim in inset.rldDimsOfInterest:
try:
sliceDim = dictDim[dim]
except KeyError:
continue
pprldistr.main(sliceDim, True,
outputdir, 'all', genericsettings.verbose)
dictNoise = sliceDim.dictByNoise()
for noise, sliceNoise in dictNoise.iteritems():
pprldistr.main(sliceNoise, True,
outputdir,
'%s' % noise, genericsettings.verbose)
dictFG = sliceDim.dictByFuncGroup()
for fGroup, sliceFuncGroup in dictFG.items():
pprldistr.main(sliceFuncGroup, True,
outputdir,
'%s' % fGroup, genericsettings.verbose)
pprldistr.fmax = None # Resetting the max final value
pprldistr.evalfmax = None # Resetting the max #fevalsfactor
if genericsettings.isRldOnSingleFcts: # copy-paste from above, here for each function instead of function groups
# ECDFs for each function
pprldmany.all_single_functions(dictAlg, None,
outputdir,
genericsettings.verbose)
print_done()
if genericsettings.isLogLoss:
print "ERT loss ratio figures and tables...",
sys.stdout.flush()
for ng, sliceNoise in dsList.dictByNoise().iteritems():
if ng == 'noiselessall':
testbed = 'noiseless'
elif ng == 'nzall':
testbed = 'noisy'
txt = ("Please input crafting effort value "
+ "for %s testbed:\n CrE = " % testbed)
CrE = genericsettings.inputCrE
while CrE is None:
try:
CrE = float(raw_input(txt))
except (SyntaxError, NameError, ValueError):
print "Float value required."
dictDim = sliceNoise.dictByDim()
for d in inset.rldDimsOfInterest:
try:
sliceDim = dictDim[d]
except KeyError:
continue
info = '%s' % ng
pplogloss.main(sliceDim, CrE, True,
outputdir, info,
verbose=genericsettings.verbose)
pplogloss.generateTable(sliceDim, CrE,
outputdir, info,
verbose=genericsettings.verbose)
for fGroup, sliceFuncGroup in sliceDim.dictByFuncGroup().iteritems():
info = '%s' % fGroup
pplogloss.main(sliceFuncGroup, CrE, True,
outputdir, info,
verbose=genericsettings.verbose)
pplogloss.evalfmax = None # Resetting the max #fevalsfactor
print_done()
latex_commands_file = os.path.join(outputdir.split(os.sep)[0], 'bbob_pproc_commands.tex')
html_file = os.path.join(outputdir, genericsettings.single_algorithm_file_name + '.html')
prepend_to_file(latex_commands_file,
['\\providecommand{\\bbobloglosstablecaption}[1]{',
pplogloss.table_caption, '}'])
prepend_to_file(latex_commands_file,
['\\providecommand{\\bbobloglossfigurecaption}[1]{',
pplogloss.figure_caption, '}'])
prepend_to_file(latex_commands_file,
['\\providecommand{\\bbobpprldistrlegend}[1]{',
pprldistr.caption_single(np.max([ val / dim for dim, val in dict_max_fun_evals.iteritems()])), # depends on the config setting, should depend on maxfevals
'}'])
replace_in_file(html_file, r'TOBEREPLACED', 'D, '.join([str(i) for i in pprldistr.single_runlength_factors[:6]]) + 'D,…')
prepend_to_file(latex_commands_file,
['\\providecommand{\\bbobppfigdimlegend}[1]{',
ppfigdim.scaling_figure_caption(),
'}'])
prepend_to_file(latex_commands_file,
['\\providecommand{\\bbobpptablecaption}[1]{',
pptable.table_caption,
'}'])
prepend_to_file(latex_commands_file,
['\\providecommand{\\algfolder}{' + algfolder + '/}'])
prepend_to_file(latex_commands_file,
['\\providecommand{\\algname}{' +
(str_to_latex(strip_pathname1(args[0])) if len(args) == 1 else str_to_latex(dsList[0].algId)) + '{}}'])
if genericsettings.isFig or genericsettings.isTab or genericsettings.isRLDistr or genericsettings.isLogLoss:
print "Output data written to folder %s" % outputdir
plt.rcdefaults()