def test_cbfs_bad_attribute(self):
"""Check handling of bad attribute tag"""
if not self.have_lz4:
self.skipTest('lz4 --no-frame-crc not available')
size = 0x140
cbw = CbfsWriter(size)
cbw.add_file_raw('u-boot',
COMPRESS_DATA,
None,
compress=cbfs_util.COMPRESS_LZ4)
data = cbw.get_data()
# Search the CBFS for the expected compression tag
with io.BytesIO(data) as fd:
while True:
pos = fd.tell()
tag, = struct.unpack('>I', fd.read(4))
if tag == cbfs_util.FILE_ATTR_TAG_COMPRESSION:
break
# Create a new CBFS with the tag changed to something invalid
newdata = data[:pos] + struct.pack('>I', 0x123) + data[pos + 4:]
with test_util.capture_sys_output() as (stdout, _stderr):
cbfs_util.CbfsReader(newdata)
self.assertEqual('Unknown attribute tag 123\n', stdout.getvalue())
def test_cbfs_invalid_file_type_on_read(self):
"""Check handling of an invalid file type when reading the CBFS"""
size = 0xb0
cbw = CbfsWriter(size)
cbw.add_file_raw('u-boot', U_BOOT_DATA)
data = cbw.get_data()
# Read in the first file header
cbr = cbfs_util.CbfsReader(data, read=False)
with io.BytesIO(data) as fd:
self.assertTrue(cbr._find_and_read_header(fd, len(data)))
pos = fd.tell()
hdr_data = fd.read(cbfs_util.FILE_HEADER_LEN)
magic, size, ftype, attr, offset = struct.unpack(
cbfs_util.FILE_HEADER_FORMAT, hdr_data)
# Create a new CBFS with a change to the file type
ftype = 0xff
newdata = data[:pos]
newdata += struct.pack(cbfs_util.FILE_HEADER_FORMAT, magic, size,
ftype, attr, offset)
newdata += data[pos + cbfs_util.FILE_HEADER_LEN:]
# Read in this CBFS and make sure that the reader complains
with self.assertRaises(ValueError) as e:
cbfs_util.CbfsReader(newdata)
self.assertIn('Unknown type 0xff when reading', str(e.exception))
def test_cbfs_missing_attribute(self):
"""Check handling of an incomplete attribute tag"""
if not self.have_lz4:
self.skipTest('lz4 --no-frame-crc not available')
size = 0x140
cbw = CbfsWriter(size)
cbw.add_file_raw('u-boot',
COMPRESS_DATA,
None,
compress=cbfs_util.COMPRESS_LZ4)
data = cbw.get_data()
# Read in the CBFS master header (only), then stop
cbr = cbfs_util.CbfsReader(data, read=False)
with io.BytesIO(data) as fd:
self.assertTrue(cbr._find_and_read_header(fd, len(data)))
pos = fd.tell()
# Create a new CBFS with only the first 4 bytes of the compression tag,
# then try to read the file
tag_pos = pos + cbfs_util.FILE_HEADER_LEN + cbfs_util.FILENAME_ALIGN
newdata = data[:tag_pos + 4]
with test_util.capture_sys_output() as (stdout, _stderr):
with io.BytesIO(newdata) as fd:
fd.seek(pos)
self.assertEqual(False, cbr._read_next_file(fd))
self.assertIn('Attribute tag at %x ran out of data' % tag_pos,
stdout.getvalue())
def test_cbfs_no_space(self):
"""Check handling of running out of space in the CBFS"""
size = 0x60
cbw = CbfsWriter(size)
cbw.add_file_raw('u-boot', U_BOOT_DATA)
with self.assertRaises(ValueError) as e:
cbw.get_data()
self.assertIn('No space for header', str(e.exception))
def test_cbfs_no_space_pad(self):
"""Check handling of running out of space in CBFS with file header"""
size = 0x70
cbw = CbfsWriter(size)
cbw._add_fileheader = True
cbw.add_file_raw('u-boot', U_BOOT_DATA)
with self.assertRaises(ValueError) as e:
cbw.get_data()
self.assertIn('No space for data before pad offset', str(e.exception))
def test_cbfs_no_space_skip(self):
"""Check handling of running out of space in CBFS with file header"""
size = 0x5c
cbw = CbfsWriter(size, arch=cbfs_util.ARCHITECTURE_PPC64)
cbw._add_fileheader = True
cbw.add_file_raw('u-boot', U_BOOT_DATA)
with self.assertRaises(ValueError) as e:
cbw.get_data()
self.assertIn('No space for data before offset', str(e.exception))
def test_cbfs_raw(self):
"""Test base handling of a Coreboot Filesystem (CBFS)"""
size = 0xb0
cbw = CbfsWriter(size)
cbw.add_file_raw('u-boot', U_BOOT_DATA)
cbw.add_file_raw('u-boot-dtb', U_BOOT_DTB_DATA)
data = cbw.get_data()
self._check_raw(data, size)
cbfs_fname = self._get_expected_cbfs(size=size)
self._compare_expected_cbfs(data, cbfs_fname)
def test_cbfs_raw_space(self):
"""Test files with unused space in the CBFS"""
size = 0xf0
cbw = CbfsWriter(size)
cbw.add_file_raw('u-boot', U_BOOT_DATA)
cbw.add_file_raw('u-boot-dtb', U_BOOT_DTB_DATA)
data = cbw.get_data()
self._check_raw(data, size)
cbfs_fname = self._get_expected_cbfs(size=size)
self._compare_expected_cbfs(data, cbfs_fname)
def test_cbfs_offset_conflict(self):
"""Test a CBFS with files that want to overlap"""
size = 0x200
cbw = CbfsWriter(size)
cbw.add_file_raw('u-boot', U_BOOT_DATA, 0x40)
cbw.add_file_raw('u-boot-dtb', U_BOOT_DTB_DATA, 0x80)
with self.assertRaises(ValueError) as e:
cbw.get_data()
self.assertIn('No space for data before pad offset', str(e.exception))
def test_cbfs_file_master_header(self):
"""Check handling of a file containing a master header"""
size = 0x100
cbw = CbfsWriter(size)
cbw._add_fileheader = True
cbw.add_file_raw('u-boot', U_BOOT_DATA)
data = cbw.get_data()
cbr = cbfs_util.CbfsReader(data)
self.assertIn('u-boot', cbr.files)
self.assertEqual(size, cbr.rom_size)
def test_cbfs_check_offset(self):
"""Test that we can discover the offset of a file after writing it"""
size = 0xb0
cbw = CbfsWriter(size)
cbw.add_file_raw('u-boot', U_BOOT_DATA)
cbw.add_file_raw('u-boot-dtb', U_BOOT_DTB_DATA)
data = cbw.get_data()
cbfs = cbfs_util.CbfsReader(data)
self.assertEqual(0x38, cbfs.files['u-boot'].cbfs_offset)
self.assertEqual(0x78, cbfs.files['u-boot-dtb'].cbfs_offset)
def test_cbfs_bad_header(self):
"""Check handling of a bad master header"""
size = 0x70
cbw = CbfsWriter(size)
cbw.add_file_raw('u-boot', U_BOOT_DATA)
data = cbw.get_data()
# Drop most of the header and try reading the modified CBFS
newdata = data[:cbw._header_offset + 4]
with test_util.capture_sys_output() as (stdout, _stderr):
with self.assertRaises(ValueError) as e:
cbfs_util.CbfsReader(newdata)
self.assertIn('Relative offset seems wrong', stdout.getvalue())
self.assertIn('Cannot find master header', str(e.exception))
def test_cbfs_debug(self):
"""Check debug output"""
size = 0x70
cbw = CbfsWriter(size)
cbw.add_file_raw('u-boot', U_BOOT_DATA)
data = cbw.get_data()
try:
cbfs_util.DEBUG = True
with test_util.capture_sys_output() as (stdout, _stderr):
cbfs_util.CbfsReader(data)
self.assertEqual('name u-boot\ndata %s\n' % U_BOOT_DATA,
stdout.getvalue())
finally:
cbfs_util.DEBUG = False
def test_cbfs_arch(self):
"""Test on non-x86 architecture"""
size = 0x100
cbw = CbfsWriter(size, arch=cbfs_util.ARCHITECTURE_PPC64)
cbw.add_file_raw('u-boot', U_BOOT_DATA)
cbw.add_file_raw('u-boot-dtb', U_BOOT_DTB_DATA)
data = cbw.get_data()
self._check_raw(data,
size,
offset=0x40,
arch=cbfs_util.ARCHITECTURE_PPC64)
# Compare against what cbfstool creates
cbfs_fname = self._get_expected_cbfs(size=size, arch='ppc64')
self._compare_expected_cbfs(data, cbfs_fname)
def ObtainContents(self, skip=None):
arch = cbfs_util.find_arch(self._cbfs_arg)
if arch is None:
self.Raise("Invalid architecture '%s'" % self._cbfs_arg)
if self.size is None:
self.Raise("'cbfs' entry must have a size property")
cbfs = CbfsWriter(self.size, arch)
for entry in self._cbfs_entries.values():
# First get the input data and put it in a file. If not available,
# try later.
if entry != skip and not entry.ObtainContents():
return False
data = entry.GetData()
cfile = None
if entry._type == 'raw':
cfile = cbfs.add_file_raw(entry._cbfs_name, data,
entry._cbfs_offset,
entry._cbfs_compress)
elif entry._type == 'stage':
cfile = cbfs.add_file_stage(entry._cbfs_name, data,
entry._cbfs_offset)
else:
entry.Raise("Unknown cbfs-type '%s' (use 'raw', 'stage')" %
entry._type)
if cfile:
entry._cbfs_file = cfile
data = cbfs.get_data()
self.SetContents(data)
return True
def test_cbfs_bad_header_ptr(self):
"""Check handling of a bad master-header pointer"""
size = 0x70
cbw = CbfsWriter(size)
cbw.add_file_raw('u-boot', U_BOOT_DATA)
data = cbw.get_data()
# Add one to the pointer to make it invalid
newdata = data[:-4] + struct.pack('<I', cbw._header_offset + 1)
# We should still be able to find the master header by searching
with test_util.capture_sys_output() as (stdout, _stderr):
cbfs = cbfs_util.CbfsReader(newdata)
self.assertIn('Relative offset seems wrong', stdout.getvalue())
self.assertIn('u-boot', cbfs.files)
self.assertEqual(size, cbfs.rom_size)
def test_cbfs_offset(self):
"""Test a CBFS with files at particular offsets"""
size = 0x200
cbw = CbfsWriter(size)
cbw.add_file_raw('u-boot', U_BOOT_DATA, 0x40)
cbw.add_file_raw('u-boot-dtb', U_BOOT_DTB_DATA, 0x140)
data = cbw.get_data()
cbfs = self._check_hdr(data, size)
self._check_uboot(cbfs,
ftype=cbfs_util.TYPE_RAW,
offset=0x40,
cbfs_offset=0x40)
self._check_dtb(cbfs, offset=0x40, cbfs_offset=0x140)
cbfs_fname = self._get_expected_cbfs(size=size, base=(0x40, 0x140))
self._compare_expected_cbfs(data, cbfs_fname)
def test_cbfs_bad_file_header(self):
"""Check handling of a bad file header"""
size = 0x70
cbw = CbfsWriter(size)
cbw.add_file_raw('u-boot', U_BOOT_DATA)
data = cbw.get_data()
# Read in the CBFS master header (only), then stop
cbr = cbfs_util.CbfsReader(data, read=False)
with io.BytesIO(data) as fd:
self.assertTrue(cbr._find_and_read_header(fd, len(data)))
pos = fd.tell()
# Remove all but 4 bytes of the file headerm and try to read the file
newdata = data[:pos + 4]
with test_util.capture_sys_output() as (stdout, _stderr):
with io.BytesIO(newdata) as fd:
fd.seek(pos)
self.assertEqual(False, cbr._read_next_file(fd))
self.assertIn('File header at 0x0 ran out of data', stdout.getvalue())
def test_cbfs_invalid_file_type_header(self):
"""Check handling of an invalid file type when outputting a header"""
size = 0xb0
cbw = CbfsWriter(size)
cfile = cbw.add_file_raw('u-boot', U_BOOT_DATA, 0)
# Change the type manually before generating the CBFS, and make sure
# that the generator complains
cfile.ftype = 0xff
with self.assertRaises(ValueError) as e:
cbw.get_data()
self.assertIn('Unknown file type 0xff', str(e.exception))
def test_cbfs_raw_compress(self):
"""Test base handling of compressing raw files"""
if not self.have_lz4:
self.skipTest('lz4 --no-frame-crc not available')
size = 0x140
cbw = CbfsWriter(size)
cbw.add_file_raw('u-boot',
COMPRESS_DATA,
None,
compress=cbfs_util.COMPRESS_LZ4)
cbw.add_file_raw('u-boot-dtb',
COMPRESS_DATA,
None,
compress=cbfs_util.COMPRESS_LZMA)
data = cbw.get_data()
cbfs = self._check_hdr(data, size)
self.assertIn('u-boot', cbfs.files)
cfile = cbfs.files['u-boot']
self.assertEqual(cfile.name, 'u-boot')
self.assertEqual(cfile.offset, 56)
self.assertEqual(cfile.data, COMPRESS_DATA)
self.assertEqual(cfile.ftype, cbfs_util.TYPE_RAW)
self.assertEqual(cfile.compress, cbfs_util.COMPRESS_LZ4)
self.assertEqual(cfile.memlen, len(COMPRESS_DATA))
self.assertIn('u-boot-dtb', cbfs.files)
cfile = cbfs.files['u-boot-dtb']
self.assertEqual(cfile.name, 'u-boot-dtb')
self.assertEqual(cfile.offset, 56)
self.assertEqual(cfile.data, COMPRESS_DATA)
self.assertEqual(cfile.ftype, cbfs_util.TYPE_RAW)
self.assertEqual(cfile.compress, cbfs_util.COMPRESS_LZMA)
self.assertEqual(cfile.memlen, len(COMPRESS_DATA))
cbfs_fname = self._get_expected_cbfs(size=size,
compress=['lz4', 'lzma'])
self._compare_expected_cbfs(data, cbfs_fname)
def test_cbfs_bad_file_string(self):
"""Check handling of an incomplete filename string"""
size = 0x70
cbw = CbfsWriter(size)
cbw.add_file_raw('16-characters xx', U_BOOT_DATA)
data = cbw.get_data()
# Read in the CBFS master header (only), then stop
cbr = cbfs_util.CbfsReader(data, read=False)
with io.BytesIO(data) as fd:
self.assertTrue(cbr._find_and_read_header(fd, len(data)))
pos = fd.tell()
# Create a new CBFS with only the first 16 bytes of the file name, then
# try to read the file
newdata = data[:pos + cbfs_util.FILE_HEADER_LEN + 16]
with test_util.capture_sys_output() as (stdout, _stderr):
with io.BytesIO(newdata) as fd:
fd.seek(pos)
self.assertEqual(False, cbr._read_next_file(fd))
self.assertIn(
'String at %#x ran out of data' % cbfs_util.FILE_HEADER_LEN,
stdout.getvalue())