def __init__(self, port='COM3'):
self.port = port
#init serial port
self._init_serial_port()
#init ble builder
self.ble_builder = BLEBuilder(self.serial_port)
#init ble parser
self.ble_parser = BLEParser(self.serial_port,
callback=self._display_packet)
#gatt server configuration
self.gatt_server = BLEGattHelper(self.ble_builder)
#init device
time.sleep(1)
def __init__(self, com_port):
self.serial_port = serial.Serial(port=com_port, baudrate=57600)
self.ble_builder = BLEBuilder(self.serial_port)
self.ble_parser = BLEParser(self.serial_port, callback=self.analyse_packet)
self.devicecnt = 0
#initialise the device
self.ble_builder.send("fe00")
#get an operating parameter value
self.ble_builder.send("fe31", param_id="\x15")
self.scan()
def __init__(self, com_port):
self.serial_port = serial.Serial(port=com_port, baudrate=57600)
self.ble_builder = BLEBuilder(self.serial_port)
self.ble_parser = BLEParser(self.serial_port,
callback=self.analyse_packet)
self.devicecnt = 0
#initialise the device
self.ble_builder.send("fe00")
#get an operating parameter value
#self.ble_builder.send("fe31", param_id="\x15")
#set Mini Connection Interval to 7.5ms
self.ble_builder.send('fe30', param_id='\x15', param_value='\x06\x00')
self.ble_builder.send('fe30', param_id='\x16', param_value='\x0C\x00')
self.ble_builder.send("fe31", param_id="\x15")
self.ble_builder.send("fe31", param_id="\x16")
self.getmini = False
self.scan()
def __init__(self, port = 'COM3'):
self.port = port
#init serial port
self._init_serial_port()
#init ble builder
self.ble_builder = BLEBuilder(self.serial_port)
#init ble parser
self.ble_parser = BLEParser(self.serial_port, callback=self._display_packet)
#gatt server configuration
self.gatt_server = BLEGattHelper(self.ble_builder)
#init device
time.sleep(1)
class ble:
def __init__(self, port='COM3'):
self.port = port
#init serial port
self._init_serial_port()
#init ble builder
self.ble_builder = BLEBuilder(self.serial_port)
#init ble parser
self.ble_parser = BLEParser(self.serial_port,
callback=self._display_packet)
#gatt server configuration
self.gatt_server = BLEGattHelper(self.ble_builder)
#init device
time.sleep(1)
# #get an operating parameter value
# print("COMMAND: Getting operating parameter value")
# print(print_output(self.ble_builder.send("fe31", param_id="\x15")))
def _init_serial_port(self):
print "Port is set to %s" % self.port
self.serial_port = serial.Serial()
self.serial_port.port = self.port
self.serial_port.baudrate = 115200
if self.serial_port.isOpen():
self.serial_port.close()
self.serial_port.open()
def DoInitDevice(self, role=Role.central):
self.role = role
print("COMMAND: Initializing device as %s role" % self.role)
if self.role == Role.central:
print(utils.printOutput(self.ble_builder.send("fe00")))
elif self.role == Role.periphral:
#init device as peripheral mode
print(
utils.printOutput(
self.ble_builder.send("fe00", profile_role="\x04")))
def DoUpdateAdvertisingData(self, data, ad_type=adType.ADVERTISEMENT_DATA):
print("COMMAND: Set advertising data as %s " % data)
data_length = utils.getByteDataLengh(data)
print(
utils.printOutput(
self.ble_builder.send("fe07",
advert_data=data,
data_length=data_length,
ad_type=ad_type)))
def DoMakeDiscoverable(self,
event_type=eventType.NON_CONN_UNDIRECT_AD,
init_addr_type=initiatorAddrType.PrivateResolve,
filter_policy=filterPolicy.All):
print("COMMAND: GAP_MakeDeviceDiscoverable")
print(
utils.printOutput(
self.ble_builder.send("fe06",
event_type=event_type,
init_addr_type=init_addr_type,
filter_policy=filter_policy)))
def DoEndDiscoverable(self):
print("COMMAND: GAPT_EndDiscoverable")
print(utils.printOutput(self.ble_builder.send("fe08")))
def DoAddService(self,
service_type=declarations.GATTPrimaryService,
number=1):
print("COMMAND: GATT_AddService")
print(
utils.printOutput(
self.ble_builder.send("fdfc",
uuid=service_type,
numAttrs=number)))
def DoDelService(self, handle):
print("COMMAND: GATT_DelService")
print(utils.printOutput((self.ble_builder.send("fdfd", handle))))
def DoAddAttribute(self,
uuid,
permissions=attrPermission.GATT_PERMIT_READ_AND_WRITE):
print("COMMAND: GATT_AddAttribute")
print(
utils.printOutput(
self.ble_builder.send("fdfe",
uuid=uuid,
permissions=permissions)))
def DoFindInfo(self,
conn_handle='\xfe\xff',
start_handle='\x01\x00',
end_handle='\xff\xff'):
print("COMMAND: ATT_FindInfoReq")
print(
utils.printOutput(
self.ble_builder.send("fd04",
conn_handle=conn_handle,
start_handle=start_handle,
end_handle=end_handle)))
def DoSendNotification(self, conn_handle, handle, value):
print("COMMAND: ATT_HandleValueNotification")
print(
utils.printOutput(
self.ble_builder.send("fd1b",
conn_handle=conn_handle,
handle=handle,
value=value)))
def stop(self):
self.ble_parser.stop()
# def DoHCIReset(self):
# print("COMMAND: HCI reset")
# print(utils.printOutput(self.ble_builder.send("0c03")))
def DoDiscover(self):
#start a device discovery scan
print("COMMAND: Starting device scan")
# print(utils.printOutput(self.ble_builder.send("fe05")))
# time.sleep(0.1)
print(utils.printOutput(self.ble_builder.send("fe04", mode="\x03")))
def DoCancelDiscover(self):
print("COMMAND: GAP_DeviceDiscoveryRequest")
print(utils.printOutput(self.ble_builder.send("fe05")))
def DoConnect(self, devAddr):
print("COMMAND: Starting establishing connection to %s" % devAddr)
print(utils.printOutput(self.ble_builder.send("fe05")))
time.sleep(0.1)
# print(utils.printOutput(self.ble_builder.send("fe0a", mode="\xFE\xFF")))
time.sleep(0.1)
print("COMMAND: GAP_EstablishLinkRequest")
print(
utils.printOutput(
self.ble_builder.send("fe09",
peer_addr=devAddr,
addr_type_peer="\x03")))
def DoReset(self, resetType):
print("COMMAND: UTIL_Reset")
print(
utils.printOutput(
self.ble_builder.send("fe80", resetType=resetType)))
time.sleep(1)
def DoDisconnect(self, conn_handle):
print("COMMAND: GAP_TerminateLinkRequest")
print(
utils.printOutput(
self.ble_builder.send("fe0a", conn_handle=conn_handle[0])))
time.sleep(1)
def DoFindPrimaryServices(self):
pass
def DoFindPrimaryServiceByUUID(self, serviceUUID, conn_handle):
print("COMMAND: GATT_DiscPrimaryServiceByUUID")
print(
utils.printOutput(
self.ble_builder.send("fd86",
value=serviceUUID,
conn_handle=conn_handle[0])))
pass
def DoDiscCharsByUUID(self, charUUID, start_handle, end_handle,
conn_handle):
print("COMMAND: GATT_DiscCharsByUUID")
print(
utils.printOutput(
self.ble_builder.send("fd88",
conn_handle=conn_handle[0],
start_handle=start_handle[0],
end_handle=end_handle[0],
type=charUUID)))
def DoEnableNotification(self, conf_handle, conn_handle):
print("COMMAND: GATT_WriteCharValue")
value = "\x01\x00"
print(
utils.printOutput(
self.ble_builder.send("fd92",
handle=conf_handle,
value=value,
conn_handle=conn_handle)))
def DoReadUsingCharUUID(self, charUUID):
print("COMMAND: Starting establishing connection")
print(
utils.printOutput(self.ble_builder.send("fdb4",
read_type=charUUID)))
def register_callback(self, command=None):
print "register callback"
# self._callback = command
setattr(self, command.func_name, command)
def _DoExchangeMTURsp(self, conn_handle, rxServerMTU):
print("COMMAND: ATT_ExchangeMTURsp")
print(
utils.printOutput(
self.ble_builder.send("fd03",
conn_handle=conn_handle,
server_rx_mtu=rxServerMTU)))
def _DoCancelPendingConnectionRequest(self):
print("COMMAND: Cancel pending connection request")
print(
utils.printOutput(
self.ble_builder.send("fe0a", conn_handle="\xFE\xFF")))
def _display_packet(self, (packet, dictionary)):
print("EVENT: Response received from the device")
print(utils.printOutput((packet, dictionary)))
event = dictionary['event'][1]
status = dictionary['status'][1]
# op_code = dictionary['op_code'][1]
if event == hci_event.GAP_DeviceInformation:
if hasattr(self, "DidDiscoverSuccess"):
Data = dictionary['data_field']
RSSI = int(dictionary['rssi'][1], 16)
Addr = dictionary['addr']
AddrType = dictionary['addr_type']
EventType = dictionary['event_type']
func = getattr(self, "DidDiscoverSuccess")
func(Addr, RSSI, Data, AddrType, EventType)
if event == hci_event.GAP_LinkEstablished:
if hasattr(self, "DidConnectSuccess"):
Addr = dictionary['dev_addr']
ConnHandle = dictionary['conn_handle']
func = getattr(self, "DidConnectSuccess")
func(Addr, ConnHandle)
#resp handler, mainly used in central mode
if event == hci_event.ATT_ErrorRsp:
print "Error found!"
if event == hci_event.ATT_FindByTypeValueRsp:
if status == "00" and hasattr(
self, "DidDiscPrimaryServiceByUUIDSuccess"):
start_handle = dictionary['start_handle']
end_handle = dictionary['end_handle']
ConnHandle = dictionary['conn_handle']
time.sleep(0.5)
func = getattr(self, "DidDiscPrimaryServiceByUUIDSuccess")
func(start_handle, end_handle, ConnHandle)
if event == hci_event.ATT_ReadByTypeRsp:
if dictionary.has_key('handle') and dictionary.has_key('value'):
ConnHandle = dictionary['conn_handle']
handle = dictionary['handle'][0] #dictionary['results']
data = dictionary['value'][0]
if len(data) > 3 and utils.hexMinusInHex(handle,
-1) == data[1:3]:
#It's DiscUsingCharUUID event
charType = data[0]
charHandle = data[1:3]
confHandle = None
value = data[3::]
if charType.encode('hex')[0] == "1": #type is notify
confHandle = utils.hexMinusInHex(handle, -2)
if hasattr(self, "DidDiscCharByUUIDSuccess"):
time.sleep(0.5)
func = getattr(self, "DidDiscCharByUUIDSuccess")
func(charType.encode('hex'), charHandle, confHandle,
value, ConnHandle[0])
else:
#It's ReadUsingCharUUID event
if hasattr(self, "DidReadCharByUUIDSuccess"):
func = getattr(self, "DidReadCharByUUIDSuccess")
func(handle, data, ConnHandle)
else:
pass
if event == hci_event.ATT_ReadByGrpTypeRsp:
pass
if event == hci_event.ATT_HandleValueNotification:
conn_handle = dictionary['conn_handle']
handle = dictionary['handle']
value = utils.hexToAscii(dictionary['values'][0])
if hasattr(self, "DidReciNotification"):
func = getattr(self, "DidReciNotification")
func(value, handle, conn_handle)
if event == hci_event.ATT_HandleValueConfirmation:
pass
#Request handler mainly used in peripheral mode
if event == hci_event.ATT_ReadByTypeReq:
self.gatt_server.ATTReadByTypeRspHandler(dictionary)
if event == hci_event.ATT_WriteReq:
#if a write req recievied, it's probably to enable a notification or a indication
#so pass the call back func to gatt helper in case a callback is needed.
if hasattr(self, "DidRequestNotificationByCharUUID"):
func = getattr(self, "DidRequestNotificationByCharUUID")
else:
func = None
self.gatt_server.ATTWriteReqHandler(dictionary, func)
if event == hci_event.ATT_ReadByGrpTypeReq:
self.gatt_server.AttGrpTypeRspHandler(dictionary)
if event == hci_event.ATT_ReadBlobReq:
self.gatt_server.ATTReadBlobRspHandler(dictionary)
if event == hci_event.ATT_ExchangeMTUReq:
conn_handle = dictionary['conn_handle'][0]
self._DoExchangeMTURsp(conn_handle, rxServerMTU)
if event == hci_event.GAP_DeviceDiscoveryDone:
pass
if event == hci_event.GAP_LinkTerminated:
pass
if event == hci_event.GAP_HCI_ExtensionCommandStatus:
op_code = dictionary['op_code'][1]
status = dictionary['status'][1]
if op_code == "GAP_EstablishLinkRequest":
if status == "11": #cancel pending establish link request
self._DoCancelPendingConnectionRequest()
class ble:
def __init__(self, port = 'COM3'):
self.port = port
#init serial port
self._init_serial_port()
#init ble builder
self.ble_builder = BLEBuilder(self.serial_port)
#init ble parser
self.ble_parser = BLEParser(self.serial_port, callback=self._display_packet)
#gatt server configuration
self.gatt_server = BLEGattHelper(self.ble_builder)
#init device
time.sleep(1)
# #get an operating parameter value
# print("COMMAND: Getting operating parameter value")
# print(print_output(self.ble_builder.send("fe31", param_id="\x15")))
def _init_serial_port(self):
print "Port is set to %s" % self.port
self.serial_port = serial.Serial()
self.serial_port.port = self.port
self.serial_port.baudrate = 115200
if self.serial_port.isOpen():
self.serial_port.close()
self.serial_port.open()
def DoInitDevice(self, role = Role.central):
self.role = role
print("COMMAND: Initializing device as %s role" % self.role)
if self.role == Role.central:
print(utils.printOutput(self.ble_builder.send("fe00")))
elif self.role == Role.periphral:
#init device as peripheral mode
print(utils.printOutput(self.ble_builder.send("fe00", profile_role = "\x04")))
def DoUpdateAdvertisingData(self, data, ad_type = adType.ADVERTISEMENT_DATA):
print("COMMAND: Set advertising data as %s " % data)
data_length = utils.getByteDataLengh(data)
print(utils.printOutput(self.ble_builder.send("fe07", advert_data = data, data_length = data_length, ad_type= ad_type)))
def DoMakeDiscoverable(self, event_type = eventType.NON_CONN_UNDIRECT_AD, init_addr_type = initiatorAddrType.PrivateResolve, filter_policy = filterPolicy.All):
print("COMMAND: GAP_MakeDeviceDiscoverable")
print(utils.printOutput(self.ble_builder.send("fe06", event_type = event_type, init_addr_type = init_addr_type, filter_policy = filter_policy)))
def DoEndDiscoverable(self):
print("COMMAND: GAPT_EndDiscoverable")
print(utils.printOutput(self.ble_builder.send("fe08")))
def DoAddService(self, service_type = declarations.GATTPrimaryService, number = 1):
print("COMMAND: GATT_AddService")
print(utils.printOutput(self.ble_builder.send("fdfc", uuid = service_type, numAttrs = number)))
def DoDelService(self, handle):
print("COMMAND: GATT_DelService")
print(utils.printOutput((self.ble_builder.send("fdfd", handle))))
def DoAddAttribute(self, uuid, permissions = attrPermission.GATT_PERMIT_READ_AND_WRITE):
print("COMMAND: GATT_AddAttribute")
print(utils.printOutput(self.ble_builder.send("fdfe", uuid = uuid, permissions = permissions)))
def DoFindInfo(self, conn_handle = '\xfe\xff', start_handle = '\x01\x00', end_handle = '\xff\xff'):
print("COMMAND: ATT_FindInfoReq")
print(utils.printOutput(self.ble_builder.send("fd04", conn_handle = conn_handle, start_handle = start_handle, end_handle = end_handle)))
def DoSendNotification(self, conn_handle, handle, value):
print("COMMAND: ATT_HandleValueNotification")
print(utils.printOutput(self.ble_builder.send("fd1b", conn_handle = conn_handle, handle = handle, value = value)))
def stop(self):
self.ble_parser.stop()
# def DoHCIReset(self):
# print("COMMAND: HCI reset")
# print(utils.printOutput(self.ble_builder.send("0c03")))
def DoDiscover(self):
#start a device discovery scan
print("COMMAND: Starting device scan")
# print(utils.printOutput(self.ble_builder.send("fe05")))
# time.sleep(0.1)
print(utils.printOutput(self.ble_builder.send("fe04", mode="\x03")))
def DoCancelDiscover(self):
print("COMMAND: GAP_DeviceDiscoveryRequest")
print(utils.printOutput(self.ble_builder.send("fe05")))
def DoConnect(self, devAddr):
print("COMMAND: Starting establishing connection to %s" % devAddr)
print(utils.printOutput(self.ble_builder.send("fe05")))
time.sleep(0.1)
# print(utils.printOutput(self.ble_builder.send("fe0a", mode="\xFE\xFF")))
time.sleep(0.1)
print("COMMAND: GAP_EstablishLinkRequest")
print(utils.printOutput(self.ble_builder.send("fe09", peer_addr=devAddr, addr_type_peer="\x03")))
def DoReset(self, resetType):
print("COMMAND: UTIL_Reset")
print(utils.printOutput(self.ble_builder.send("fe80", resetType = resetType)))
time.sleep(1)
def DoDisconnect(self, conn_handle):
print("COMMAND: GAP_TerminateLinkRequest")
print(utils.printOutput(self.ble_builder.send("fe0a", conn_handle = conn_handle[0])))
time.sleep(1)
def DoFindPrimaryServices(self):
pass
def DoFindPrimaryServiceByUUID(self, serviceUUID, conn_handle):
print("COMMAND: GATT_DiscPrimaryServiceByUUID")
print(utils.printOutput(self.ble_builder.send("fd86", value = serviceUUID, conn_handle = conn_handle[0])))
pass
def DoDiscCharsByUUID(self, charUUID, start_handle, end_handle, conn_handle):
print("COMMAND: GATT_DiscCharsByUUID")
print(utils.printOutput(self.ble_builder.send("fd88", conn_handle = conn_handle[0], start_handle = start_handle[0], end_handle = end_handle[0], type=charUUID)))
def DoEnableNotification(self, conf_handle, conn_handle):
print("COMMAND: GATT_WriteCharValue")
value = "\x01\x00"
print(utils.printOutput(self.ble_builder.send("fd92", handle = conf_handle, value = value, conn_handle = conn_handle)))
def DoReadUsingCharUUID(self, charUUID):
print("COMMAND: Starting establishing connection")
print(utils.printOutput(self.ble_builder.send("fdb4", read_type=charUUID)))
def register_callback(self, command = None):
print "register callback"
# self._callback = command
setattr(self, command.func_name, command)
def _DoExchangeMTURsp(self,conn_handle, rxServerMTU):
print("COMMAND: ATT_ExchangeMTURsp")
print(utils.printOutput(self.ble_builder.send("fd03",conn_handle = conn_handle, server_rx_mtu = rxServerMTU)))
def _DoCancelPendingConnectionRequest(self):
print("COMMAND: Cancel pending connection request")
print(utils.printOutput(self.ble_builder.send("fe0a", conn_handle="\xFE\xFF")))
def _display_packet(self, (packet, dictionary)):
print("EVENT: Response received from the device")
print(utils.printOutput((packet, dictionary)))
event = dictionary['event'][1]
status = dictionary['status'][1]
# op_code = dictionary['op_code'][1]
if event == hci_event.GAP_DeviceInformation:
if hasattr(self, "DidDiscoverSuccess"):
Data = dictionary['data_field']
RSSI = int(dictionary['rssi'][1], 16)
Addr = dictionary['addr']
AddrType = dictionary['addr_type']
EventType = dictionary['event_type']
func = getattr(self, "DidDiscoverSuccess")
func(Addr, RSSI, Data, AddrType, EventType)
if event == hci_event.GAP_LinkEstablished:
if hasattr(self, "DidConnectSuccess"):
Addr = dictionary['dev_addr']
ConnHandle = dictionary['conn_handle']
func = getattr(self, "DidConnectSuccess")
func(Addr, ConnHandle)
#resp handler, mainly used in central mode
if event == hci_event.ATT_ErrorRsp:
print "Error found!"
if event == hci_event.ATT_FindByTypeValueRsp:
if status == "00" and hasattr(self, "DidDiscPrimaryServiceByUUIDSuccess"):
start_handle = dictionary['start_handle']
end_handle = dictionary['end_handle']
ConnHandle = dictionary['conn_handle']
time.sleep(0.5)
func = getattr(self, "DidDiscPrimaryServiceByUUIDSuccess")
func(start_handle, end_handle, ConnHandle)
if event == hci_event.ATT_ReadByTypeRsp:
if dictionary.has_key('handle') and dictionary.has_key('value'):
ConnHandle = dictionary['conn_handle']
handle = dictionary['handle'][0]#dictionary['results']
data = dictionary['value'][0]
if len(data) > 3 and utils.hexMinusInHex(handle, -1) == data[1:3]:
#It's DiscUsingCharUUID event
charType = data[0]
charHandle = data[1:3]
confHandle = None
value = data[3::]
if charType.encode('hex')[0] == "1": #type is notify
confHandle = utils.hexMinusInHex(handle, -2)
if hasattr(self, "DidDiscCharByUUIDSuccess"):
time.sleep(0.5)
func = getattr(self, "DidDiscCharByUUIDSuccess")
func(charType.encode('hex'), charHandle, confHandle, value, ConnHandle[0])
else:
#It's ReadUsingCharUUID event
if hasattr(self, "DidReadCharByUUIDSuccess"):
func = getattr(self, "DidReadCharByUUIDSuccess")
func(handle, data, ConnHandle)
else:
pass
if event == hci_event.ATT_ReadByGrpTypeRsp:
pass
if event == hci_event.ATT_HandleValueNotification:
conn_handle = dictionary['conn_handle']
handle = dictionary['handle']
value = utils.hexToAscii(dictionary['values'][0])
if hasattr(self, "DidReciNotification"):
func = getattr(self, "DidReciNotification")
func(value, handle, conn_handle)
if event == hci_event.ATT_HandleValueConfirmation:
pass
#Request handler mainly used in peripheral mode
if event == hci_event.ATT_ReadByTypeReq:
self.gatt_server.ATTReadByTypeRspHandler(dictionary)
if event == hci_event.ATT_WriteReq:
#if a write req recievied, it's probably to enable a notification or a indication
#so pass the call back func to gatt helper in case a callback is needed.
if hasattr(self, "DidRequestNotificationByCharUUID"):
func = getattr(self, "DidRequestNotificationByCharUUID")
else:
func = None
self.gatt_server.ATTWriteReqHandler(dictionary, func)
if event == hci_event.ATT_ReadByGrpTypeReq:
self.gatt_server.AttGrpTypeRspHandler(dictionary)
if event == hci_event.ATT_ReadBlobReq:
self.gatt_server.ATTReadBlobRspHandler(dictionary)
if event == hci_event.ATT_ExchangeMTUReq:
conn_handle = dictionary['conn_handle'][0]
self._DoExchangeMTURsp(conn_handle, rxServerMTU)
if event == hci_event.GAP_DeviceDiscoveryDone:
pass
if event == hci_event.GAP_LinkTerminated:
pass
if event == hci_event.GAP_HCI_ExtensionCommandStatus:
op_code = dictionary['op_code'][1]
status = dictionary['status'][1]
if op_code == "GAP_EstablishLinkRequest":
if status == "11": #cancel pending establish link request
self._DoCancelPendingConnectionRequest()
