def broadlinkConnect():
global device, isConnected
try:
if (Parameters["Mode3"] == 'RM2T' or Parameters["Mode3"] == 'RM2'):
device = broadlink.rm(host=(Parameters["Address"], 80),
mac=bytearray.fromhex(Parameters["Mode1"]))
elif (Parameters["Mode3"] == 'A1'):
device = broadlink.a1(host=(Parameters["Address"], 80),
mac=bytearray.fromhex(Parameters["Mode1"]))
elif (Parameters["Mode3"] == 'SP1'):
device = broadlink.sp1(host=(Parameters["Address"], 80),
mac=bytearray.fromhex(Parameters["Mode1"]))
elif (Parameters["Mode3"] == 'SP2' or Parameters["Mode3"] == 'SP3S'):
device = broadlink.sp2(host=(Parameters["Address"], 80),
mac=bytearray.fromhex(Parameters["Mode1"]))
elif (Parameters["Mode3"] == 'MP1'):
device = broadlink.mp1(host=(Parameters["Address"], 80),
mac=bytearray.fromhex(Parameters["Mode1"]))
else:
device = 'unknown'
device.auth()
device.host
isConnected = True
Domoticz.Log("Connected to Broadlink device: " +
str(Parameters["Address"]))
except:
Domoticz.Error("Error Connecting to Broadlink device...." +
str(Parameters["Address"]))
isConnected = False
return False
return True
def setup_platform(hass, config, add_entities, discovery_info=None):
"""Set up the Broadlink switches."""
devices = config.get(CONF_SWITCHES)
slots = config.get("slots", {})
ip_addr = config.get(CONF_HOST)
friendly_name = config.get(CONF_FRIENDLY_NAME)
mac_addr = binascii.unhexlify(config.get(CONF_MAC).encode().replace(b":", b""))
switch_type = config.get(CONF_TYPE)
retry_times = config.get(CONF_RETRY)
def _get_mp1_slot_name(switch_friendly_name, slot):
"""Get slot name."""
if not slots[f"slot_{slot}"]:
return f"{switch_friendly_name} slot {slot}"
return slots[f"slot_{slot}"]
if switch_type in RM_TYPES:
broadlink_device = broadlink.rm((ip_addr, 80), mac_addr, None)
hass.add_job(async_setup_service, hass, ip_addr, broadlink_device)
switches = []
for object_id, device_config in devices.items():
switches.append(
BroadlinkRMSwitch(
object_id,
device_config.get(CONF_FRIENDLY_NAME, object_id),
broadlink_device,
device_config.get(CONF_COMMAND_ON),
device_config.get(CONF_COMMAND_OFF),
retry_times,
)
)
elif switch_type in SP1_TYPES:
broadlink_device = broadlink.sp1((ip_addr, 80), mac_addr, None)
switches = [BroadlinkSP1Switch(friendly_name, broadlink_device, retry_times)]
elif switch_type in SP2_TYPES:
broadlink_device = broadlink.sp2((ip_addr, 80), mac_addr, None)
switches = [BroadlinkSP2Switch(friendly_name, broadlink_device, retry_times)]
elif switch_type in MP1_TYPES:
switches = []
broadlink_device = broadlink.mp1((ip_addr, 80), mac_addr, None)
parent_device = BroadlinkMP1Switch(broadlink_device, retry_times)
for i in range(1, 5):
slot = BroadlinkMP1Slot(
_get_mp1_slot_name(friendly_name, i),
broadlink_device,
i,
parent_device,
retry_times,
)
switches.append(slot)
broadlink_device.timeout = config.get(CONF_TIMEOUT)
try:
broadlink_device.auth()
except OSError:
_LOGGER.error("Failed to connect to device")
add_entities(switches)
def get_device(cf):
device_type = cf.get('device_type', 'lookup')
if device_type == 'lookup':
local_address = cf.get('local_address', None)
lookup_timeout = cf.get('lookup_timeout', 20)
devices = broadlink.discover(timeout=lookup_timeout) if local_address is None else \
broadlink.discover(timeout=lookup_timeout, local_ip_address=local_address)
if len(devices) == 0:
logging.error('No Broadlink device found')
sys.exit(2)
if len(devices) > 1:
logging.error('More than one Broadlink device found (' +
', '.join([d.host for d in devices]) + ')')
sys.exit(2)
return devices[0]
else:
host = (cf.get('device_host'), 80)
mac = bytearray.fromhex(cf.get('device_mac').replace(':', ' '))
if device_type == 'rm':
return broadlink.rm(host=host, mac=mac)
elif device_type == 'sp1':
return broadlink.sp1(host=host, mac=mac)
elif device_type == 'sp2':
return broadlink.sp2(host=host, mac=mac)
elif device_type == 'a1':
return broadlink.a1(host=host, mac=mac)
else:
logging.error('Incorrect device configured: ' + device_type)
sys.exit(2)
def get_device(cf):
device_type = cf.get('device_type', 'lookup')
if device_type == 'lookup':
local_address = cf.get('local_address', None)
lookup_timeout = cf.get('lookup_timeout', 20)
devices = broadlink.discover(timeout=lookup_timeout) if local_address is None else \
broadlink.discover(timeout=lookup_timeout, local_ip_address=local_address)
if len(devices) == 0:
logging.error('No Broadlink device found')
sys.exit(2)
if len(devices) > 1:
logging.error('More than one Broadlink device found (' +
', '.join([
d.type + '/' + d.host[0] + '/' +
':'.join(format(s, '02x') for s in d.mac[::-1])
for d in devices
]) + ')')
sys.exit(2)
return configure_device(devices[0], topic_prefix)
elif device_type == 'multiple_lookup':
local_address = cf.get('local_address', None)
lookup_timeout = cf.get('lookup_timeout', 20)
devices = broadlink.discover(timeout=lookup_timeout) if local_address is None else \
broadlink.discover(timeout=lookup_timeout, local_ip_address=local_address)
if len(devices) == 0:
logging.error('No Broadlink devices found')
sys.exit(2)
mqtt_multiple_prefix_format = cf.get('mqtt_multiple_subprefix_format',
None)
devices_dict = {}
for device in devices:
mqtt_subprefix = mqtt_multiple_prefix_format.format(
type=device.type,
host=device.host[0],
mac='_'.join(format(s, '02x') for s in device.mac[::-1]),
mac_nic='_'.join(format(s, '02x') for s in device.mac[2::-1]))
device = configure_device(device, topic_prefix + mqtt_subprefix)
devices_dict[mqtt_subprefix] = device
return devices_dict
elif device_type == 'test':
return configure_device(TestDevice(cf), topic_prefix)
else:
host = (cf.get('device_host'), 80)
mac = bytearray.fromhex(cf.get('device_mac').replace(':', ' '))
if device_type == 'rm':
device = broadlink.rm(host=host, mac=mac, devtype=0x2712)
elif device_type == 'sp1':
device = broadlink.sp1(host=host, mac=mac, devtype=0)
elif device_type == 'sp2':
device = broadlink.sp2(host=host, mac=mac, devtype=0x2711)
elif device_type == 'a1':
device = broadlink.a1(host=host, mac=mac, devtype=0x2714)
elif device_type == 'mp1':
device = broadlink.mp1(host=host, mac=mac, devtype=0x4EB5)
else:
logging.error('Incorrect device configured: ' + device_type)
sys.exit(2)
return configure_device(device, topic_prefix)
def setup_platform(hass, config, add_entities, discovery_info=None):
"""Set up the Broadlink switches."""
import broadlink
devices = config.get(CONF_SWITCHES)
slots = config.get('slots', {})
ip_addr = config.get(CONF_HOST)
friendly_name = config.get(CONF_FRIENDLY_NAME)
mac_addr = binascii.unhexlify(
config.get(CONF_MAC).encode().replace(b':', b''))
switch_type = config.get(CONF_TYPE)
def _get_mp1_slot_name(switch_friendly_name, slot):
"""Get slot name."""
if not slots['slot_{}'.format(slot)]:
return '{} slot {}'.format(switch_friendly_name, slot)
return slots['slot_{}'.format(slot)]
if switch_type in RM_TYPES:
broadlink_device = broadlink.rm((ip_addr, 80), mac_addr, None)
hass.add_job(async_setup_service, hass, ip_addr, broadlink_device)
switches = []
for object_id, device_config in devices.items():
switches.append(
BroadlinkRMSwitch(
object_id,
device_config.get(CONF_FRIENDLY_NAME, object_id),
broadlink_device,
device_config.get(CONF_COMMAND_ON),
device_config.get(CONF_COMMAND_OFF)
)
)
elif switch_type in SP1_TYPES:
broadlink_device = broadlink.sp1((ip_addr, 80), mac_addr, None)
switches = [BroadlinkSP1Switch(friendly_name, broadlink_device)]
elif switch_type in SP2_TYPES:
broadlink_device = broadlink.sp2((ip_addr, 80), mac_addr, None)
switches = [BroadlinkSP2Switch(friendly_name, broadlink_device)]
elif switch_type in MP1_TYPES:
switches = []
broadlink_device = broadlink.mp1((ip_addr, 80), mac_addr, None)
parent_device = BroadlinkMP1Switch(broadlink_device)
for i in range(1, 5):
slot = BroadlinkMP1Slot(
_get_mp1_slot_name(friendly_name, i),
broadlink_device, i, parent_device)
switches.append(slot)
broadlink_device.timeout = config.get(CONF_TIMEOUT)
try:
broadlink_device.auth()
except socket.timeout:
_LOGGER.error("Failed to connect to device")
add_entities(switches)
def readSettings(settingsFile, devname):
try:
Dev = devices.Dev[devname]
if Dev['Type'] == 'RM' or Dev['Type'] == 'RM2':
device = broadlink.rm((Dev['IPAddress'], 80), Dev['MACAddress'],
Dev['Device'])
elif Dev['Type'] == 'MP1':
device = broadlink.mp1((Dev['IPAddress'], 80), Dev['MACAddress'],
Dev['Device'])
elif Dev['Type'] == 'SP1':
device = broadlink.sp1((Dev['IPAddress'], 80), Dev['MACAddress'],
Dev['Device'])
elif Dev['Type'] == 'SP2':
device = broadlink.sp2((Dev['IPAddress'], 80), Dev['MACAddress'],
Dev['Device'])
elif Dev['Type'] == 'A1':
device = broadlink.a1((Dev['IPAddress'], 80), Dev['MACAddress'],
Dev['Device'])
elif Dev['Type'] == 'HYSEN':
device = broadlink.hysen((Dev['IPAddress'], 80), Dev['MACAddress'],
Dev['Device'])
elif Dev['Type'] == 'S1C':
device = broadlink.S1C((Dev['IPAddress'], 80), Dev['MACAddress'],
Dev['Device'])
elif Dev['Type'] == 'DOOYA':
device = broadlink.dooya((Dev['IPAddress'], 80), Dev['MACAddress'],
Dev['Device'])
else:
return False
Dev['BaseType'] = "broadlink"
if 'Delay' in Dev:
device.delay = Dev['Delay']
else:
device.delay = 0.0
#- set the callbacks
Dev['learnCommand'] = learnCommand
Dev['sendCommand'] = sendCommand
Dev['getStatus'] = None
Dev['setStatus'] = None
Dev['getSensor'] = getSensor
return device
except Exception as e:
logfile(
"Broadlink device support requires broadlink python module.\npip3 install broadlink",
"WARN")
return None
def setup_platform(hass, config, add_entities, discovery_info=None):
"""Set up the Broadlink switches."""
devices = config.get(CONF_SWITCHES)
slots = config.get("slots", {})
host = config.get(CONF_HOST)
mac_addr = config.get(CONF_MAC)
friendly_name = config.get(CONF_FRIENDLY_NAME)
model = config[CONF_TYPE]
retry_times = config.get(CONF_RETRY)
def generate_rm_switches(switches, broadlink_device):
"""Generate RM switches."""
return [
BroadlinkRMSwitch(
object_id,
config.get(CONF_FRIENDLY_NAME, object_id),
broadlink_device,
config.get(CONF_COMMAND_ON),
config.get(CONF_COMMAND_OFF),
retry_times,
) for object_id, config in switches.items()
]
def get_mp1_slot_name(switch_friendly_name, slot):
"""Get slot name."""
if not slots[f"slot_{slot}"]:
return f"{switch_friendly_name} slot {slot}"
return slots[f"slot_{slot}"]
if model in RM_TYPES:
broadlink_device = blk.rm((host, DEFAULT_PORT), mac_addr, None)
hass.add_job(async_setup_service, hass, host, broadlink_device)
switches = generate_rm_switches(devices, broadlink_device)
elif model in RM4_TYPES:
broadlink_device = blk.rm4((host, DEFAULT_PORT), mac_addr, None)
hass.add_job(async_setup_service, hass, host, broadlink_device)
switches = generate_rm_switches(devices, broadlink_device)
elif model in SP1_TYPES:
broadlink_device = blk.sp1((host, DEFAULT_PORT), mac_addr, None)
switches = [
BroadlinkSP1Switch(friendly_name, broadlink_device, retry_times)
]
elif model in SP2_TYPES:
broadlink_device = blk.sp2((host, DEFAULT_PORT), mac_addr, None)
switches = [
BroadlinkSP2Switch(friendly_name, broadlink_device, retry_times)
]
elif model in MP1_TYPES:
switches = []
broadlink_device = blk.mp1((host, DEFAULT_PORT), mac_addr, None)
parent_device = BroadlinkMP1Switch(broadlink_device, retry_times)
for i in range(1, 5):
slot = BroadlinkMP1Slot(
get_mp1_slot_name(friendly_name, i),
broadlink_device,
i,
parent_device,
retry_times,
)
switches.append(slot)
broadlink_device.timeout = config.get(CONF_TIMEOUT)
try:
broadlink_device.auth()
except OSError:
_LOGGER.error("Failed to connect to device")
add_entities(switches)
mac_nic='_'.join(format(s, '02x') for s in device.mac[3::]))
>>>>>>> upstream2/master
device = configure_device(device, topic_prefix + mqtt_subprefix)
devices_dict[mqtt_subprefix] = device
return devices_dict
elif device_type == 'test':
return configure_device(TestDevice(cf), topic_prefix)
else:
host = (cf.get('device_host'), 80)
mac = bytearray.fromhex(cf.get('device_mac').replace(':', ' '))
if device_type == 'rm':
device = broadlink.rm(host=host, mac=mac, devtype=0x2712)
elif device_type == 'rm4':
device = broadlink.rm4(host=host, mac=mac, devtype=0x51da)
elif device_type == 'sp1':
device = broadlink.sp1(host=host, mac=mac, devtype=0)
elif device_type == 'sp2':
device = broadlink.sp2(host=host, mac=mac, devtype=0x2711)
elif device_type == 'a1':
device = broadlink.a1(host=host, mac=mac, devtype=0x2714)
elif device_type == 'mp1':
device = broadlink.mp1(host=host, mac=mac, devtype=0x4EB5)
elif device_type == 'dooya':
device = broadlink.dooya(host=host, mac=mac, devtype=0x4E4D)
elif device_type == 'bg1':
device = broadlink.bg1(host=host, mac=mac, devtype=0x51E3)
else:
logging.error('Incorrect device configured: ' + device_type)
sys.exit(2)
return configure_device(device, topic_prefix)
def get_device(cf, devices_dictionary={}):
device_type = cf.get('device_type', 'lookup')
if device_type == 'lookup':
local_address = cf.get('local_address', None)
lookup_timeout = cf.get('lookup_timeout', 20)
devices = broadlink.discover(timeout=lookup_timeout) if local_address is None else \
broadlink.discover(timeout=lookup_timeout, local_ip_address=local_address)
if len(devices) == 0:
logging.error('No Broadlink device found')
sys.exit(2)
if len(devices) > 1:
logging.error('More than one Broadlink device found (' +
', '.join([
d.type + '/' + d.host[0] + '/' +
':'.join(format(s, '02x') for s in d.mac[::-1])
for d in devices
]) + ')')
sys.exit(2)
return configure_device(devices[0], topic_prefix)
elif device_type == 'multiple_lookup':
local_address = cf.get('local_address', None)
lookup_timeout = cf.get('lookup_timeout', 20)
devices = broadlink.discover(timeout=lookup_timeout) if local_address is None else \
broadlink.discover(timeout=lookup_timeout, local_ip_address=local_address)
if len(devices) == 0:
logging.error('No Broadlink devices found')
sys.exit(2)
mqtt_multiple_prefix_format = cf.get('mqtt_multiple_subprefix_format',
None)
devices_dict = {}
for device in devices:
mqtt_subprefix = mqtt_multiple_prefix_format.format(
type=device.type,
host=device.host[0],
mac='_'.join(format(s, '02x') for s in device.mac[::-1]),
mac_nic='_'.join(format(s, '02x') for s in device.mac[2::-1]))
device = configure_device(device, topic_prefix + mqtt_subprefix)
devices_dict[mqtt_subprefix] = device
return devices_dict
elif device_type == 'test':
return configure_device(TestDevice(cf), topic_prefix)
elif device_type == 'dict':
global device_rescan_required
device_rescan_required = False
devices_list = json.loads(cf.get('devices_dict', '[]'))
mqtt_multiple_prefix_format = cf.get('mqtt_multiple_subprefix_format',
None)
for device in devices_list:
if pingOk(sHost=device['host'], count=3):
mac = bytearray.fromhex(device['mac'].replace(':', ' '))[::-1]
host = (device['host'], 80)
init_func = getattr(broadlink, device['class'])
deviceObj = init_func(host=host,
mac=mac,
devtype=int(device['devtype'], 0))
mqtt_subprefix = mqtt_multiple_prefix_format.format(
type=deviceObj.type,
host=deviceObj.host[0],
mac='_'.join(
format(s, '02x') for s in deviceObj.mac[::-1]),
mac_nic='_'.join(
format(s, '02x') for s in deviceObj.mac[2::-1]))
if mqtt_subprefix not in devices_dictionary:
device_configured = configure_device(
deviceObj, topic_prefix + mqtt_subprefix)
devices_dictionary[mqtt_subprefix] = device_configured
print("Type: %s, host: %s, MQTT subprefix: %s" %
(deviceObj.type, deviceObj.host, mqtt_subprefix))
if len(devices_list) != len(devices_dictionary):
device_rescan_required = True
logging.warning(
'Less devices are found than expected. Rescan is required.')
return devices_dictionary
else:
host = (cf.get('device_host'), 80)
mac = bytearray.fromhex(cf.get('device_mac').replace(':', ' '))
if device_type == 'rm':
device = broadlink.rm(host=host, mac=mac, devtype=0x2712)
elif device_type == 'rm4':
device = broadlink.rm4(host=host, mac=mac, devtype=0x51da)
elif device_type == 'sp1':
device = broadlink.sp1(host=host, mac=mac, devtype=0)
elif device_type == 'sp2':
device = broadlink.sp2(host=host, mac=mac, devtype=0x2711)
elif device_type == 'a1':
device = broadlink.a1(host=host, mac=mac, devtype=0x2714)
elif device_type == 'mp1':
device = broadlink.mp1(host=host, mac=mac, devtype=0x4EB5)
elif device_type == 'dooya':
device = broadlink.dooya(host=host, mac=mac, devtype=0x4E4D)
elif device_type == 'bg1':
device = broadlink.bg1(host=host, mac=mac, devtype=0x51E3)
elif device_type == 'SmartBulb':
device = broadlink.lb1(host=host, mac=mac, devtype=0x60c8)
else:
logging.error('Incorrect device configured: ' + device_type)
sys.exit(2)
return configure_device(device, topic_prefix)
def setup_platform(hass, config, add_entities, discovery_info=None):
"""Set up the Broadlink switches."""
import broadlink
devices = config.get(CONF_SWITCHES)
slots = config.get('slots', {})
ip_addr = config.get(CONF_HOST)
friendly_name = config.get(CONF_FRIENDLY_NAME)
mac_addr = binascii.unhexlify(
config.get(CONF_MAC).encode().replace(b':', b''))
switch_type = config.get(CONF_TYPE)
async def _learn_command(call):
"""Handle a learn command."""
try:
auth = await hass.async_add_job(broadlink_device.auth)
except socket.timeout:
_LOGGER.error("Failed to connect to device, timeout")
return
if not auth:
_LOGGER.error("Failed to connect to device")
return
await hass.async_add_job(broadlink_device.enter_learning)
_LOGGER.info("Press the key you want Home Assistant to learn")
start_time = utcnow()
while (utcnow() - start_time) < timedelta(seconds=20):
packet = await hass.async_add_job(
broadlink_device.check_data)
if packet:
log_msg = "Received packet is: {}".\
format(b64encode(packet).decode('utf8'))
_LOGGER.info(log_msg)
hass.components.persistent_notification.async_create(
log_msg, title='Broadlink switch')
return
await asyncio.sleep(1, loop=hass.loop)
_LOGGER.error("Did not received any signal")
hass.components.persistent_notification.async_create(
"Did not received any signal", title='Broadlink switch')
async def _send_packet(call):
"""Send a packet."""
packets = call.data.get('packet', [])
for packet in packets:
for retry in range(DEFAULT_RETRY):
try:
extra = len(packet) % 4
if extra > 0:
packet = packet + ('=' * (4 - extra))
payload = b64decode(packet)
await hass.async_add_job(
broadlink_device.send_data, payload)
break
except (socket.timeout, ValueError):
try:
await hass.async_add_job(
broadlink_device.auth)
except socket.timeout:
if retry == DEFAULT_RETRY-1:
_LOGGER.error("Failed to send packet to device")
def _get_mp1_slot_name(switch_friendly_name, slot):
"""Get slot name."""
if not slots['slot_{}'.format(slot)]:
return '{} slot {}'.format(switch_friendly_name, slot)
return slots['slot_{}'.format(slot)]
if switch_type in RM_TYPES:
broadlink_device = broadlink.rm((ip_addr, 80), mac_addr, None)
hass.services.register(DOMAIN, SERVICE_LEARN + '_' +
slugify(ip_addr.replace('.', '_')),
_learn_command)
hass.services.register(DOMAIN, SERVICE_SEND + '_' +
slugify(ip_addr.replace('.', '_')),
_send_packet,
vol.Schema({'packet': cv.ensure_list}))
switches = []
for object_id, device_config in devices.items():
switches.append(
BroadlinkRMSwitch(
object_id,
device_config.get(CONF_FRIENDLY_NAME, object_id),
broadlink_device,
device_config.get(CONF_COMMAND_ON),
device_config.get(CONF_COMMAND_OFF)
)
)
elif switch_type in SP1_TYPES:
broadlink_device = broadlink.sp1((ip_addr, 80), mac_addr, None)
switches = [BroadlinkSP1Switch(friendly_name, broadlink_device)]
elif switch_type in SP2_TYPES:
broadlink_device = broadlink.sp2((ip_addr, 80), mac_addr, None)
switches = [BroadlinkSP2Switch(friendly_name, broadlink_device)]
elif switch_type in MP1_TYPES:
switches = []
broadlink_device = broadlink.mp1((ip_addr, 80), mac_addr, None)
parent_device = BroadlinkMP1Switch(broadlink_device)
for i in range(1, 5):
slot = BroadlinkMP1Slot(
_get_mp1_slot_name(friendly_name, i),
broadlink_device, i, parent_device)
switches.append(slot)
broadlink_device.timeout = config.get(CONF_TIMEOUT)
try:
broadlink_device.auth()
except socket.timeout:
_LOGGER.error("Failed to connect to device")
add_entities(switches)
def readSettingsFile():
global devices
global DeviceByName
global RestrictAccess
global LearnFrom
global OverwriteProtected
global GlobalPassword
global GlobalTimeout
global settingsFile
# A few defaults
serverPort = 8080
Autodetect = False
OverwriteProtected = True
listen_address = '0.0.0.0'
broadcast_address = '255.255.255.255'
settingsFile = configparser.ConfigParser()
settingsFile.optionxform = str
settingsFile.read(settings.settingsINI)
Dev = settings.Dev
GlobalTimeout = settings.GlobalTimeout
DiscoverTimeout = settings.DiscoverTimeout
# Override them
if settingsFile.has_option('General', 'password'):
GlobalPassword = settingsFile.get('General', 'password').strip()
if settingsFile.has_option('General', 'serverPort'):
serverPort = int(settingsFile.get('General', 'serverPort'))
if settingsFile.has_option('General', 'serverAddress'):
listen_address = settingsFile.get('General', 'serverAddress')
if listen_address.strip() == '':
listen_address = '0.0.0.0'
if settingsFile.has_option('General', 'restrictAccess'):
RestrictAccess = settingsFile.get('General', 'restrictAccess').strip()
if settingsFile.has_option('General', 'learnFrom'):
LearnFrom = settingsFile.get('General', 'learnFrom').strip()
if settingsFile.has_option('General', 'allowOverwrite'):
OverwriteProtected = False
if settingsFile.has_option('General', 'broadcastAddress'):
broadcast = settingsFile.get('General', 'broadcastAddress')
if broadcast_address.strip() == '':
broadcast_address = '255.255.255.255'
if settingsFile.has_option('General', 'Autodetect'):
try:
DiscoverTimeout = int(
settingsFile.get('General', 'Autodetect').strip())
except:
DiscoverTimeout = 5
Autodetect = True
settingsFile.remove_option('General', 'Autodetect')
# Device list
DeviceByName = {}
if not settings.DevList:
Autodetect = True
if Autodetect == True:
print("Beginning device auto-detection ... ")
# Try to support multi-homed broadcast better
try:
devices = broadlink.discover(DiscoverTimeout, listen_address,
broadcast_address)
except:
devices = broadlink.discover(DiscoverTimeout, listen_address)
backupSettings()
try:
broadlinkControlIniFile = open(
path.join(settings.applicationDir, 'settings.ini'), 'w')
for device in devices:
try:
device.hostname = socket.gethostbyaddr(device.host[0])[0]
if "." in device.hostname:
device.hostname = device.hostname.split('.')[0]
except:
device.hostname = "Broadlink" + device.type.upper()
if device.hostname in DeviceByName:
device.hostname = "%s-%s" % (
device.hostname, str(device.host).split('.')[3])
DeviceByName[device.hostname] = device
if not settingsFile.has_section(device.hostname):
settingsFile.add_section(device.hostname)
settingsFile.set(device.hostname, 'IPAddress',
str(device.host[0]))
hexmac = ':'.join(["%02x" % (x) for x in reversed(device.mac)])
settingsFile.set(device.hostname, 'MACAddress', hexmac)
settingsFile.set(device.hostname, 'Device',
hex(device.devtype))
settingsFile.set(device.hostname, 'Timeout',
str(device.timeout))
settingsFile.set(device.hostname, 'Type', device.type.upper())
device.auth()
print("%s: Found %s on %s (%s) type: %s" %
(device.hostname, device.type, device.host, hexmac,
hex(device.devtype)))
settingsFile.write(broadlinkControlIniFile)
broadlinkControlIniFile.close()
except StandardError as e:
print("Error writing settings file: %s" % e)
restoreSettings()
else:
devices = []
if settings.DevList:
for devname in settings.DevList:
if Dev[devname, 'Type'] == 'RM' or Dev[devname, 'Type'] == 'RM2':
device = broadlink.rm((Dev[devname, 'IPAddress'], 80),
Dev[devname, 'MACAddress'],
Dev[devname, 'Device'])
if Dev[devname, 'Type'] == 'MP1':
device = broadlink.mp1((Dev[devname, 'IPAddress'], 80),
Dev[devname, 'MACAddress'],
Dev[devname, 'Device'])
if Dev[devname, 'Type'] == 'SP1':
device = broadlink.sp1((Dev[devname, 'IPAddress'], 80),
Dev[devname, 'MACAddress'],
Dev[devname, 'Device'])
if Dev[devname, 'Type'] == 'SP2':
device = broadlink.sp2((Dev[devname, 'IPAddress'], 80),
Dev[devname, 'MACAddress'],
Dev[devname, 'Device'])
if Dev[devname, 'Type'] == 'A1':
device = broadlink.a1((Dev[devname, 'IPAddress'], 80),
Dev[devname, 'MACAddress'],
Dev[devname, 'Device'])
if Dev[devname, 'Type'] == 'HYSEN':
device = broadlink.hysen((Dev[devname, 'IPAddress'], 80),
Dev[devname, 'MACAddress'],
Dev[devname, 'Device'])
if Dev[devname, 'Type'] == 'S1C':
device = broadlink.S1C((Dev[devname, 'IPAddress'], 80),
Dev[devname, 'MACAddress'],
Dev[devname, 'Device'])
if Dev[devname, 'Type'] == 'DOOYA':
device = broadlink.dooya((Dev[devname, 'IPAddress'], 80),
Dev[devname, 'MACAddress'],
Dev[devname, 'Device'])
device.timeout = Dev[devname, 'Timeout']
if not devname in DeviceByName:
device.hostname = devname
device.auth()
devices.append(device)
print("%s: Read %s on %s (%s)" %
(devname, device.type, str(device.host[0]), device.mac))
DeviceByName[devname] = device
return {
"port": serverPort,
"listen": listen_address,
"timeout": GlobalTimeout
}
def setup_platform(hass, config, add_devices, discovery_info=None):
"""Set up the Broadlink switches."""
import broadlink
devices = config.get(CONF_SWITCHES)
slots = config.get('slots', {})
ip_addr = config.get(CONF_HOST)
friendly_name = config.get(CONF_FRIENDLY_NAME)
mac_addr = binascii.unhexlify(
config.get(CONF_MAC).encode().replace(b':', b''))
switch_type = config.get(CONF_TYPE)
if DATA_KEY not in hass.data:
hass.data[DATA_KEY] = {}
commands = config.get(CONF_COMMANDS)
IR_COMMANDS.update(commands)
def _get_mp1_slot_name(switch_friendly_name, slot):
"""Get slot name."""
if not slots['slot_{}'.format(slot)]:
return '{} slot {}'.format(switch_friendly_name, slot)
return slots['slot_{}'.format(slot)]
if switch_type in IR_TYPES:
broadlink_device = broadlink.rm((ip_addr, 80), mac_addr, None)
broadlink_rm = BroadlinkRM(
hass,
config.get(CONF_NAME, 'broadlink_rm_' + ip_addr.replace('.', '_')),
None, broadlink_device)
hass.data[DATA_KEY][ip_addr] = broadlink_rm
switches = [broadlink_rm]
elif switch_type in RM_TYPES:
broadlink_device = broadlink.rm((ip_addr, 80), mac_addr, None)
# hass.services.register(DOMAIN, SERVICE_LEARN + '_' +
# ip_addr.replace('.', '_'), _learn_command)
# hass.services.register(DOMAIN, SERVICE_SEND + '_' +
# ip_addr.replace('.', '_'), _send_packet,
# vol.Schema({'packet': cv.ensure_list}))
switches = []
for object_id, device_config in devices.items():
switches.append(
BroadlinkRMSwitch(
object_id, device_config.get(CONF_FRIENDLY_NAME,
object_id), broadlink_device,
device_config.get(CONF_COMMAND_ON),
device_config.get(CONF_COMMAND_OFF)))
elif switch_type in SP1_TYPES:
broadlink_device = broadlink.sp1((ip_addr, 80), mac_addr, None)
switches = [BroadlinkSP1Switch(friendly_name, broadlink_device)]
elif switch_type in SP2_TYPES:
broadlink_device = broadlink.sp2((ip_addr, 80), mac_addr, None)
switches = [BroadlinkSP2Switch(friendly_name, broadlink_device)]
elif switch_type in MP1_TYPES:
switches = []
broadlink_device = broadlink.mp1((ip_addr, 80), mac_addr, None)
parent_device = BroadlinkMP1Switch(broadlink_device)
for i in range(1, 5):
slot = BroadlinkMP1Slot(_get_mp1_slot_name(friendly_name, i),
broadlink_device, i, parent_device)
switches.append(slot)
broadlink_device.timeout = config.get(CONF_TIMEOUT)
try:
broadlink_device.auth()
except socket.timeout:
_LOGGER.error("Failed to connect to device")
add_devices(switches)
async def async_service_handler(service):
"""Map services to methods on Broadlink RM."""
method = SERVICE_TO_METHOD.get(service.service)
params = {
key: value
for key, value in service.data.items() if key != ATTR_ENTITY_ID
}
entity_ids = service.data.get(ATTR_ENTITY_ID)
if entity_ids:
devices = [
device for device in hass.data[DATA_KEY].values()
if device.entity_id in entity_ids
]
else:
devices = hass.data[DATA_KEY].values()
update_tasks = []
for device in devices:
if not hasattr(device, method['method']):
continue
await getattr(device, method['method'])(**params)
update_tasks.append(device.async_update_ha_state(True))
if update_tasks:
await asyncio.wait(update_tasks, loop=hass.loop)
for service in SERVICE_TO_METHOD:
schema = SERVICE_TO_METHOD[service].get('schema', SERVICE_SCHEMA)
hass.services.async_register(DOMAIN,
service,
async_service_handler,
schema=schema)
def setup_platform(hass, config, add_devices, discovery_info=None):
"""Set up Broadlink switches."""
import broadlink
devices = config.get(CONF_SWITCHES, {})
ip_addr = config.get(CONF_HOST)
friendly_name = config.get(CONF_FRIENDLY_NAME)
mac_addr = binascii.unhexlify(
config.get(CONF_MAC).encode().replace(b':', b''))
switch_type = config.get(CONF_TYPE)
@asyncio.coroutine
def _learn_command(call):
try:
auth = yield from hass.async_add_job(broadlink_device.auth)
except socket.timeout:
_LOGGER.error("Failed to connect to device, timeout")
return
if not auth:
_LOGGER.error("Failed to connect to device")
return
yield from hass.async_add_job(broadlink_device.enter_learning)
_LOGGER.info("Press the key you want HASS to learn")
start_time = utcnow()
while (utcnow() - start_time) < timedelta(seconds=20):
packet = yield from hass.async_add_job(
broadlink_device.check_data)
if packet:
log_msg = "Recieved packet is: {}".\
format(b64encode(packet).decode('utf8'))
_LOGGER.info(log_msg)
hass.components.persistent_notification.async_create(
log_msg, title='Broadlink switch')
return
yield from asyncio.sleep(1, loop=hass.loop)
_LOGGER.error("Did not received any signal")
hass.components.persistent_notification.async_create(
"Did not received any signal", title='Broadlink switch')
@asyncio.coroutine
def _send_packet(call):
packets = call.data.get('packet', [])
for packet in packets:
for retry in range(DEFAULT_RETRY):
try:
payload = b64decode(packet)
yield from hass.async_add_job(
broadlink_device.send_data, payload)
break
except (socket.timeout, ValueError):
try:
yield from hass.async_add_job(
broadlink_device.auth)
except socket.timeout:
if retry == DEFAULT_RETRY-1:
_LOGGER.error("Failed to send packet to device")
if switch_type in RM_TYPES:
broadlink_device = broadlink.rm((ip_addr, 80), mac_addr)
hass.services.register(DOMAIN, SERVICE_LEARN + '_' +
ip_addr.replace('.', '_'), _learn_command)
hass.services.register(DOMAIN, SERVICE_SEND + '_' +
ip_addr.replace('.', '_'), _send_packet)
switches = []
for object_id, device_config in devices.items():
switches.append(
BroadlinkRMSwitch(
device_config.get(CONF_FRIENDLY_NAME, object_id),
broadlink_device,
device_config.get(CONF_COMMAND_ON),
device_config.get(CONF_COMMAND_OFF)
)
)
elif switch_type in SP1_TYPES:
broadlink_device = broadlink.sp1((ip_addr, 80), mac_addr)
switches = [BroadlinkSP1Switch(friendly_name, broadlink_device)]
elif switch_type in SP2_TYPES:
broadlink_device = broadlink.sp2((ip_addr, 80), mac_addr)
switches = [BroadlinkSP2Switch(friendly_name, broadlink_device)]
broadlink_device.timeout = config.get(CONF_TIMEOUT)
try:
broadlink_device.auth()
except socket.timeout:
_LOGGER.error("Failed to connect to device")
add_devices(switches)
def setup_platform(hass, config, add_devices, discovery_info=None):
"""Setup Broadlink switches."""
import broadlink
devices = config.get(CONF_SWITCHES, {})
ip_addr = config.get(CONF_HOST)
friendly_name = config.get(CONF_FRIENDLY_NAME)
mac_addr = binascii.unhexlify(
config.get(CONF_MAC).encode().replace(b':', b''))
switch_type = config.get(CONF_TYPE)
persistent_notification = loader.get_component('persistent_notification')
@asyncio.coroutine
def _learn_command(call):
try:
auth = yield from hass.loop.run_in_executor(None,
broadlink_device.auth)
except socket.timeout:
_LOGGER.error("Failed to connect to device, timeout.")
return
if not auth:
_LOGGER.error("Failed to connect to device.")
return
yield from hass.loop.run_in_executor(None,
broadlink_device.enter_learning)
_LOGGER.info("Press the key you want HASS to learn")
start_time = utcnow()
while (utcnow() - start_time) < timedelta(seconds=20):
packet = yield from hass.loop.run_in_executor(None,
broadlink_device.
check_data)
if packet:
log_msg = 'Recieved packet is: {}'.\
format(b64encode(packet).decode('utf8'))
_LOGGER.info(log_msg)
persistent_notification.async_create(hass, log_msg,
title='Broadlink switch')
return
yield from asyncio.sleep(1, loop=hass.loop)
_LOGGER.error('Did not received any signal.')
persistent_notification.async_create(hass,
"Did not received any signal",
title='Broadlink switch')
if switch_type in RM_TYPES:
broadlink_device = broadlink.rm((ip_addr, 80), mac_addr)
hass.services.register(DOMAIN, SERVICE_LEARN + '_' + ip_addr,
_learn_command)
switches = []
for object_id, device_config in devices.items():
switches.append(
BroadlinkRMSwitch(
device_config.get(CONF_FRIENDLY_NAME, object_id),
broadlink_device,
device_config.get(CONF_COMMAND_ON),
device_config.get(CONF_COMMAND_OFF)
)
)
elif switch_type in SP1_TYPES:
broadlink_device = broadlink.sp1((ip_addr, 80), mac_addr)
switches = [BroadlinkSP1Switch(friendly_name, broadlink_device)]
elif switch_type in SP2_TYPES:
broadlink_device = broadlink.sp2((ip_addr, 80), mac_addr)
switches = [BroadlinkSP2Switch(friendly_name, broadlink_device)]
broadlink_device.timeout = config.get(CONF_TIMEOUT)
try:
broadlink_device.auth()
except socket.timeout:
_LOGGER.error("Failed to connect to device.")
add_devices(switches)
async def async_setup_platform(hass,
config,
async_add_entities,
discovery_info=None):
"""Set up the Broadlink switches."""
host = config[CONF_HOST]
mac_addr = config[CONF_MAC]
friendly_name = config[CONF_FRIENDLY_NAME]
model = config[CONF_TYPE]
timeout = config[CONF_TIMEOUT]
slots = config[CONF_SLOTS]
devices = config[CONF_SWITCHES]
def generate_rm_switches(switches, broadlink_device):
"""Generate RM switches."""
return [
BroadlinkRMSwitch(
object_id,
config.get(CONF_FRIENDLY_NAME, object_id),
broadlink_device,
config.get(CONF_COMMAND_ON),
config.get(CONF_COMMAND_OFF),
) for object_id, config in switches.items()
]
def get_mp1_slot_name(switch_friendly_name, slot):
"""Get slot name."""
if not slots[f"slot_{slot}"]:
return f"{switch_friendly_name} slot {slot}"
return slots[f"slot_{slot}"]
if model in RM_TYPES:
api = blk.rm((host, DEFAULT_PORT), mac_addr, None)
broadlink_device = BroadlinkDevice(hass, api)
switches = generate_rm_switches(devices, broadlink_device)
elif model in RM4_TYPES:
api = blk.rm4((host, DEFAULT_PORT), mac_addr, None)
broadlink_device = BroadlinkDevice(hass, api)
switches = generate_rm_switches(devices, broadlink_device)
elif model in SP1_TYPES:
api = blk.sp1((host, DEFAULT_PORT), mac_addr, None)
broadlink_device = BroadlinkDevice(hass, api)
switches = [BroadlinkSP1Switch(friendly_name, broadlink_device)]
elif model in SP2_TYPES:
api = blk.sp2((host, DEFAULT_PORT), mac_addr, None)
broadlink_device = BroadlinkDevice(hass, api)
switches = [BroadlinkSP2Switch(friendly_name, broadlink_device)]
elif model in MP1_TYPES:
api = blk.mp1((host, DEFAULT_PORT), mac_addr, None)
broadlink_device = BroadlinkDevice(hass, api)
parent_device = BroadlinkMP1Switch(broadlink_device)
switches = [
BroadlinkMP1Slot(
get_mp1_slot_name(friendly_name, i),
broadlink_device,
i,
parent_device,
) for i in range(1, 5)
]
api.timeout = timeout
connected = await broadlink_device.async_connect()
if not connected:
raise PlatformNotReady
if model in RM_TYPES or model in RM4_TYPES:
hass.async_create_task(
async_setup_service(hass, host, broadlink_device))
async_add_entities(switches)
def setup_platform(hass, config, add_devices, discovery_info=None):
"""Set up Broadlink switches."""
import broadlink
devices = config.get(CONF_SWITCHES, {})
ip_addr = config.get(CONF_HOST)
friendly_name = config.get(CONF_FRIENDLY_NAME)
mac_addr = binascii.unhexlify(
config.get(CONF_MAC).encode().replace(b':', b''))
switch_type = config.get(CONF_TYPE)
persistent_notification = loader.get_component('persistent_notification')
@asyncio.coroutine
def _learn_command(call):
try:
auth = yield from hass.async_add_job(broadlink_device.auth)
except socket.timeout:
_LOGGER.error("Failed to connect to device, timeout")
return
if not auth:
_LOGGER.error("Failed to connect to device")
return
yield from hass.async_add_job(broadlink_device.enter_learning)
_LOGGER.info("Press the key you want HASS to learn")
start_time = utcnow()
while (utcnow() - start_time) < timedelta(seconds=20):
packet = yield from hass.async_add_job(broadlink_device.check_data)
if packet:
log_msg = "Recieved packet is: {}".\
format(b64encode(packet).decode('utf8'))
_LOGGER.info(log_msg)
persistent_notification.async_create(hass,
log_msg,
title='Broadlink switch')
return
yield from asyncio.sleep(1, loop=hass.loop)
_LOGGER.error("Did not received any signal")
persistent_notification.async_create(hass,
"Did not received any signal",
title='Broadlink switch')
@asyncio.coroutine
def _send_packet(call):
packets = call.data.get('packet', [])
for packet in packets:
for retry in range(DEFAULT_RETRY):
try:
payload = b64decode(packet)
yield from hass.async_add_job(broadlink_device.send_data,
payload)
break
except (socket.timeout, ValueError):
try:
yield from hass.async_add_job(broadlink_device.auth)
except socket.timeout:
if retry == DEFAULT_RETRY - 1:
_LOGGER.error("Failed to send packet to device")
if switch_type in RM_TYPES:
broadlink_device = broadlink.rm((ip_addr, 80), mac_addr)
hass.services.register(DOMAIN,
SERVICE_LEARN + '_' + ip_addr.replace('.', '_'),
_learn_command)
hass.services.register(DOMAIN,
SERVICE_SEND + '_' + ip_addr.replace('.', '_'),
_send_packet)
switches = []
for object_id, device_config in devices.items():
switches.append(
BroadlinkRMSwitch(
device_config.get(CONF_FRIENDLY_NAME, object_id),
broadlink_device, device_config.get(CONF_COMMAND_ON),
device_config.get(CONF_COMMAND_OFF)))
elif switch_type in SP1_TYPES:
broadlink_device = broadlink.sp1((ip_addr, 80), mac_addr)
switches = [BroadlinkSP1Switch(friendly_name, broadlink_device)]
elif switch_type in SP2_TYPES:
broadlink_device = broadlink.sp2((ip_addr, 80), mac_addr)
switches = [BroadlinkSP2Switch(friendly_name, broadlink_device)]
broadlink_device.timeout = config.get(CONF_TIMEOUT)
try:
broadlink_device.auth()
except socket.timeout:
_LOGGER.error("Failed to connect to device")
add_devices(switches)
def setup_platform(hass, config, add_devices, discovery_info=None):
"""Set up the Broadlink switches."""
import broadlink
devices = config.get(CONF_SWITCHES)
slots = config.get('slots', {})
ip_addr = config.get(CONF_HOST)
friendly_name = config.get(CONF_FRIENDLY_NAME)
mac_addr = binascii.unhexlify(
config.get(CONF_MAC).encode().replace(b':', b''))
switch_type = config.get(CONF_TYPE)
@asyncio.coroutine
def _learn_command(call):
"""Handle a learn command."""
try:
auth = yield from hass.async_add_job(broadlink_device.auth)
except socket.timeout:
_LOGGER.error("Failed to connect to device, timeout")
return
if not auth:
_LOGGER.error("Failed to connect to device")
return
yield from hass.async_add_job(broadlink_device.enter_learning)
_LOGGER.info("Press the key you want Home Assistant to learn")
start_time = utcnow()
while (utcnow() - start_time) < timedelta(seconds=20):
packet = yield from hass.async_add_job(broadlink_device.check_data)
if packet:
log_msg = "Received packet is: {}".\
format(b64encode(packet).decode('utf8'))
_LOGGER.info(log_msg)
hass.components.persistent_notification.async_create(
log_msg, title='Broadlink switch')
return
yield from asyncio.sleep(1, loop=hass.loop)
_LOGGER.error("Did not received any signal")
hass.components.persistent_notification.async_create(
"Did not received any signal", title='Broadlink switch')
@asyncio.coroutine
def _send_packet(call):
"""Send a packet."""
packets = call.data.get('packet', [])
for packet in packets:
for retry in range(DEFAULT_RETRY):
try:
extra = len(packet) % 4
if extra > 0:
packet = packet + ('=' * (4 - extra))
payload = b64decode(packet)
yield from hass.async_add_job(broadlink_device.send_data,
payload)
break
except (socket.timeout, ValueError):
try:
yield from hass.async_add_job(broadlink_device.auth)
except socket.timeout:
if retry == DEFAULT_RETRY - 1:
_LOGGER.error("Failed to send packet to device")
def _get_mp1_slot_name(switch_friendly_name, slot):
"""Get slot name."""
if not slots['slot_{}'.format(slot)]:
return '{} slot {}'.format(switch_friendly_name, slot)
return slots['slot_{}'.format(slot)]
if switch_type in RM_TYPES:
broadlink_device = broadlink.rm((ip_addr, 80), mac_addr)
hass.services.register(DOMAIN,
SERVICE_LEARN + '_' + ip_addr.replace('.', '_'),
_learn_command)
hass.services.register(DOMAIN,
SERVICE_SEND + '_' + ip_addr.replace('.', '_'),
_send_packet,
vol.Schema({'packet': cv.ensure_list}))
switches = []
for object_id, device_config in devices.items():
switches.append(
BroadlinkRMSwitch(
device_config.get(CONF_FRIENDLY_NAME, object_id),
broadlink_device, device_config.get(CONF_COMMAND_ON),
device_config.get(CONF_COMMAND_OFF)))
elif switch_type in SP1_TYPES:
broadlink_device = broadlink.sp1((ip_addr, 80), mac_addr)
switches = [BroadlinkSP1Switch(friendly_name, broadlink_device)]
elif switch_type in SP2_TYPES:
broadlink_device = broadlink.sp2((ip_addr, 80), mac_addr)
switches = [BroadlinkSP2Switch(friendly_name, broadlink_device)]
elif switch_type in MP1_TYPES:
switches = []
broadlink_device = broadlink.mp1((ip_addr, 80), mac_addr)
parent_device = BroadlinkMP1Switch(broadlink_device)
for i in range(1, 5):
slot = BroadlinkMP1Slot(_get_mp1_slot_name(friendly_name, i),
broadlink_device, i, parent_device)
switches.append(slot)
broadlink_device.timeout = config.get(CONF_TIMEOUT)
try:
broadlink_device.auth()
except socket.timeout:
_LOGGER.error("Failed to connect to device")
add_devices(switches)
def setup_platform(hass, config, add_entities, discovery_info=None):
"""Set up the Broadlink switches."""
import broadlink
devices = config.get(CONF_SWITCHES)
slots = config.get('slots', {})
ip_addr = config.get(CONF_HOST)
friendly_name = config.get(CONF_FRIENDLY_NAME)
mac_addr = binascii.unhexlify(
config.get(CONF_MAC).encode().replace(b':', b''))
switch_type = config.get(CONF_TYPE)
commands = config.get(CONF_COMMANDS)
IR_COMMANDS.update(commands)
def _get_mp1_slot_name(switch_friendly_name, slot):
"""Get slot name."""
if not slots['slot_{}'.format(slot)]:
return '{} slot {}'.format(switch_friendly_name, slot)
return slots['slot_{}'.format(slot)]
if switch_type in IR_TYPES:
broadlink_device = broadlink.rm((ip_addr, 80), mac_addr, None)
name = config.get(CONF_NAME,
'broadlink_rm_' + ip_addr.replace('.', '_'))
entity_id = ENTITY_ID_FORMAT.format(slugify(name))
broadlink_rm = BroadlinkRM(hass, name, None, broadlink_device)
hass.add_job(async_setup_service, hass, ip_addr, entity_id,
broadlink_rm)
switches = [broadlink_rm]
if switch_type in RM_TYPES:
broadlink_device = broadlink.rm((ip_addr, 80), mac_addr, None)
switches = []
for object_id, device_config in devices.items():
switches.append(
BroadlinkRMSwitch(
object_id, device_config.get(CONF_FRIENDLY_NAME,
object_id), broadlink_device,
device_config.get(CONF_COMMAND_ON),
device_config.get(CONF_COMMAND_OFF)))
elif switch_type in SP1_TYPES:
broadlink_device = broadlink.sp1((ip_addr, 80), mac_addr, None)
switches = [BroadlinkSP1Switch(friendly_name, broadlink_device)]
elif switch_type in SP2_TYPES:
broadlink_device = broadlink.sp2((ip_addr, 80), mac_addr, None)
switches = [BroadlinkSP2Switch(friendly_name, broadlink_device)]
elif switch_type in MP1_TYPES:
switches = []
broadlink_device = broadlink.mp1((ip_addr, 80), mac_addr, None)
parent_device = BroadlinkMP1Switch(broadlink_device)
for i in range(1, 5):
slot = BroadlinkMP1Slot(_get_mp1_slot_name(friendly_name, i),
broadlink_device, i, parent_device)
switches.append(slot)
broadlink_device.timeout = config.get(CONF_TIMEOUT)
try:
broadlink_device.auth()
except socket.timeout:
_LOGGER.error("Failed to connect to device")
add_entities(switches)