def test_all_features_sandwich():
layout = load_layout_file('test_all_features_sandwich.kle')
case = KeyboardCase(layout, ['dxf'])
case.create_bottom_layer('bottom')
case.export('bottom', 'test_exports')
case.create_middle_layer('closed')
case.export('closed', 'test_exports')
case.create_middle_layer('open')
case.export('open', 'test_exports')
case.create_switch_layer('reinforcing')
case.export('reinforcing', 'test_exports')
case.create_switch_layer('switch')
case.export('switch', 'test_exports')
case.create_switch_layer('top')
case.export('top', 'test_exports')
assert case.name == 'test_all_features_sandwich'
assert case.formats == ['dxf']
assert case.kerf == 0.1
assert case.width == 259.65
assert case.height == 107.25
assert case.inside_width == 251.45
assert case.inside_height == 99.05
for layer in ('bottom', 'closed', 'open', 'reinforcing', 'switch', 'top'):
assert layer in case.layers
assert filecmp.cmp('test_exports/%s/switch_layer.dxf' % case.name, 'test_exports/%s.knowngood/switch_layer.dxf' % case.name) == True
return True
def test_all_shapes():
layout = load_layout_file('test_all_shapes.kle')
layout[0]['corner_type'] = 'bevel'
layout[0]['corner_radius'] = 4
layout[0]['name'] = 'test_bevel'
case = KeyboardCase(layout, ['dxf'])
case.create_switch_layer('switch')
case.export('switch', 'test_exports')
# Basic checks
assert case.name == 'test_bevel'
assert case.formats == ['dxf']
assert case.kerf == 0
assert case.layers == {'switch': {}}
assert case.width == 247.65
assert case.height == 95.25
assert case.inside_width == 247.65
assert case.inside_height == 95.25
# Make sure the DXF matches the reference DXF
assert filecmp.cmp(
'test_exports/%s/switch_layer.dxf' % case.name,
'test_exports/%s.knowngood/switch_layer.dxf' % case.name) == True
return True
def test_all_shapes():
layout = load_layout_file('test_all_shapes.kle')
case = KeyboardCase(layout, ['dxf'])
case.create_switch_layer('switch')
case.export('switch', 'test_exports')
# Basic checks
assert case.name == '4ac3f3a2dc4d5b2225bf03f0f83f047960846a30'
assert case.formats == ['dxf']
assert case.kerf == 0
assert case.layers == {'switch': {}}
assert case.width == 247.65
assert case.height == 95.25
assert case.inside_width == 247.65
assert case.inside_height == 95.25
# Make sure the DXF matches the reference DXF
assert filecmp.cmp('test_exports/switch_%s.dxf' % case.name, 'test_exports/switch_%s.dxf.knowngood' % case.name) == True
return True
def test_numpad():
layout = load_layout_file('test_numpad.kle')
layout[0]['name'] = 'test_numpad'
case = KeyboardCase(layout, ['dxf'])
case.create_switch_layer('switch')
case.export('switch', 'test_exports')
# Basic checks
assert case.name == 'test_numpad'
assert case.formats == ['dxf']
assert case.kerf == 0
assert case.layers == {'switch': {}}
assert case.width == 76.2
assert case.height == 95.25
assert case.inside_width == 76.2
assert case.inside_height == 95.25
# Make sure the DXF matches the reference DXF
assert filecmp.cmp('test_exports/switch_%s.dxf' % case.name, 'test_exports/switch_%s.dxf.knowngood' % case.name) == True
return True
def test_all_shapes():
layout = load_layout_file('test_all_shapes.kle')
layout[0]['corner_type'] = 'bevel'
layout[0]['corner_radius'] = 4
layout[0]['name'] = 'test_bevel'
case = KeyboardCase(layout, ['dxf'])
case.create_switch_layer('switch')
case.export('switch', 'test_exports')
# Basic checks
assert case.name == 'test_bevel'
assert case.formats == ['dxf']
assert case.kerf == 0
assert case.layers == {'switch': {}}
assert case.width == 247.65
assert case.height == 95.25
assert case.inside_width == 247.65
assert case.inside_height == 95.25
# Make sure the DXF matches the reference DXF
assert filecmp.cmp('test_exports/switch_%s.dxf' % case.name, 'test_exports/switch_%s.dxf.knowngood' % case.name) == True
return True
def test_all_features_poker():
layout = load_layout_file('test_all_features_poker.kle')
case = KeyboardCase(layout, ['dxf'])
case.create_switch_layer('reinforcing')
case.export('reinforcing', 'test_exports')
case.create_switch_layer('switch')
case.export('switch', 'test_exports')
assert case.name == 'test_all_features_poker'
assert case.formats == ['dxf']
assert case.kerf == 0.1
assert case.width == 247.65
assert case.height == 95.25
#assert case.inside_width == 247.45 # FIXME: Why doesn't this work?
assert case.inside_height == 95.05
for layer in ('reinforcing', 'switch'):
assert layer in case.layers
assert filecmp.cmp('test_exports/switch_%s.dxf' % case.name, 'test_exports/switch_%s.dxf.knowngood' % case.name) == True
return True
def test_all_shapes():
layout = load_layout_file('test_all_shapes.kle')
case = KeyboardCase(layout, ['dxf'])
case.create_switch_layer('switch')
case.export('switch', 'test_exports')
# Basic checks
assert case.name == '4ac3f3a2dc4d5b2225bf03f0f83f047960846a30'
assert case.formats == ['dxf']
assert case.kerf == 0
assert case.layers == {'switch': {}}
assert case.width == 247.65
assert case.height == 95.25
assert case.inside_width == 247.65
assert case.inside_height == 95.25
# Make sure the DXF matches the reference DXF
assert filecmp.cmp('test_exports/switch_%s.dxf' % case.name,
'test_exports/switch_%s.dxf.knowngood' %
case.name) == True
return True
def test_all_shapes():
layout = load_layout_file('test_all_shapes.kle')
case = KeyboardCase(layout, ['dxf'])
case.create_switch_layer('switch')
case.export('switch', 'test_exports')
# Basic checks
assert case.name == '50660d1f6922253e5e1dccdedb2b4e4812c1fdc4'
assert case.formats == ['dxf']
assert case.kerf == 0
assert case.layers == {'switch': {}}
assert case.width == 247.65
assert case.height == 95.25
assert case.inside_width == 247.65
assert case.inside_height == 95.25
# Make sure the DXF matches the reference DXF
assert filecmp.cmp(
'test_exports/%s/switch_layer.dxf' % case.name,
'test_exports/%s.knowngood/switch_layer.dxf' % case.name) == True
return True
def test_all_features_poker():
layout = load_layout_file('test_all_features_poker.kle')
case = KeyboardCase(layout, ['dxf'])
case.create_switch_layer('reinforcing')
case.export('reinforcing', 'test_exports')
case.create_switch_layer('switch')
case.export('switch', 'test_exports')
assert case.name == 'test_all_features_poker'
assert case.formats == ['dxf']
assert case.kerf == 0.1
assert case.width == 247.65
assert case.height == 95.25
#assert case.inside_width == 247.45 # FIXME: Why doesn't this work?
assert case.inside_height == 95.05
for layer in ('reinforcing', 'switch'):
assert layer in case.layers
assert filecmp.cmp('test_exports/%s/switch_layer.dxf' % case.name, 'test_exports/%s.knowngood/switch_layer.dxf' % case.name) == True
return True
def test_numpad():
layout = load_layout_file('test_numpad.kle')
layout[0]['name'] = 'test_numpad'
case = KeyboardCase(layout, ['dxf'])
case.create_switch_layer('switch')
case.export('switch', 'test_exports')
# Basic checks
assert case.name == 'test_numpad'
assert case.formats == ['dxf']
assert case.kerf == 0
assert case.layers == {'switch': {}}
assert case.width == 76.2
assert case.height == 95.25
assert case.inside_width == 76.2
assert case.inside_height == 95.25
# Make sure the DXF matches the reference DXF
assert filecmp.cmp(
'test_exports/%s/switch_layer.dxf' % case.name,
'test_exports/%s.knowngood/switch_layer.dxf' % case.name) == True
return True
def test_all_features_sandwich():
layout = load_layout_file("test_all_features_sandwich.kle")
case = KeyboardCase(layout, ["dxf"])
case.create_bottom_layer("bottom")
case.export("bottom", "test_exports")
case.create_middle_layer("closed")
case.export("closed", "test_exports")
case.create_middle_layer("open")
case.export("open", "test_exports")
case.create_switch_layer("reinforcing")
case.export("reinforcing", "test_exports")
case.create_switch_layer("switch")
case.export("switch", "test_exports")
case.create_switch_layer("top")
case.export("top", "test_exports")
assert case.name == "test_all_features_sandwich"
assert case.formats == ["dxf"]
assert case.kerf == 0.1
assert case.width == 259.65
assert case.height == 107.25
assert case.inside_width == 251.45
assert case.inside_height == 99.05
for layer in ("bottom", "closed", "open", "reinforcing", "switch", "top"):
assert layer in case.layers
assert (
filecmp.cmp("test_exports/switch_%s.dxf" % case.name, "test_exports/switch_%s.dxf.knowngood" % case.name)
== True
)
return True