def run(self):
conn = self.frmwk.serial_connection
data = self.options['PARAMS']
if self.options['USE_HEX']:
data = data.replace(' ', '')
hex_regex = re.compile('^([0-9a-fA-F]{2})+$')
if hex_regex.match(data) is None:
self.frmwk.print_error(
'Non-hex characters found in \'PARAMS\'')
return
data = binascii.a2b_hex(data)
else:
data = data.encode('utf-8')
self.frmwk.print_status('Initiating procedure ' + (
C1219_PROCEDURE_NAMES.get(self.options['PROC_NUMBER']) or '#' +
str(self.options['PROC_NUMBER'])))
error_code, data = conn.run_procedure(
self.options['PROC_NUMBER'], self.advanced_options['STD_VS_MFG'],
data)
self.frmwk.print_status('Finished running procedure #' +
str(self.options['PROC_NUMBER']))
self.frmwk.print_status('Received response from procedure: ' + (
C1219_PROC_RESULT_CODES.get(error_code) or 'UNKNOWN'))
if len(data):
self.frmwk.print_status('Received data output from procedure: ')
self.frmwk.print_hexdump(data)
def run(self):
conn = self.frmwk.serial_connection
if not self.frmwk.serial_login(): # don't alert on failed logins
self.logger.warning('meter login failed')
self.frmwk.print_error('Meter login failed, procedure may fail')
data = self.options['PARAMS']
if self.options['USEHEX']:
data = unhexlify(data)
self.frmwk.print_status('Initiating procedure ' + (
C1219_PROCEDURE_NAMES.get(self.options['PROCNBR']) or '#' +
str(self.options['PROCNBR'])))
errCode, data = conn.run_procedure(self.options['PROCNBR'],
self.advanced_options['STDVSMFG'],
data)
conn.stop()
self.frmwk.print_status('Finished running procedure #' +
str(self.options['PROCNBR']))
self.frmwk.print_status('Received respose from procedure: ' + (
C1219_PROC_RESULT_CODES.get(errCode) or 'UNKNOWN'))
if len(data):
self.frmwk.print_status('Received data output from procedure: ')
self.frmwk.print_hexdump(data)
return
def run(self):
conn = self.frmwk.serial_connection
logger = self.logger
mode = self.options['MODE']
mode = mode.upper()
mode = mode.replace('_', '')
mode = mode.replace(' ', '')
if mode[-4:] == 'MODE':
mode = mode[:-4]
mode_dict = C1219_METER_MODE_NAMES
if not mode in mode_dict:
self.frmwk.print_error(
'unknown mode, please use METERING, TEST, METERSHOP, or FACTORY'
)
return
logger.info('setting mode to: ' + mode)
self.frmwk.print_status('Setting Mode To: ' + mode)
mode = mode_dict[mode]
try:
result_code, response_data = conn.run_procedure(
6, False, struct.pack('B', mode))
except C1218ReadTableError as error:
self.frmwk.print_exception(error)
return
except C1218WriteTableError as error:
if error.code == 4: # onp/operation not possible
self.frmwk.print_error(
'Meter responded that it can not set the mode to the desired type'
)
else:
self.frmwk.print_exception(error)
return
except C1219ProcedureError as error:
self.frmwk.print_exception(error)
return
if result_code < 2:
self.frmwk.print_good(C1219_PROC_RESULT_CODES[result_code])
else:
self.frmwk.print_error(
C1219_PROC_RESULT_CODES.get(
result_code,
"Unknown status code: {0}".format(result_code)))
def run(self):
conn = self.frmwk.serial_connection
if not self.frmwk.serial_login(): # don't alert on failed logins
self.logger.warning('meter login failed')
self.frmwk.print_error('Meter login failed, procedure may fail')
data = self.options['PARAMS']
if self.options['USEHEX']:
data = data.decode('hex')
self.frmwk.print_status('Initiating procedure ' + (C1219_PROCEDURE_NAMES.get(self.options['PROCNBR']) or '#' + str(self.options['PROCNBR'])))
errCode, data = conn.run_procedure(self.options['PROCNBR'], self.advanced_options['STDVSMFG'], data)
conn.stop()
self.frmwk.print_status('Finished running procedure #' + str(self.options['PROCNBR']))
self.frmwk.print_status('Received respose from procedure: ' + (C1219_PROC_RESULT_CODES.get(errCode) or 'UNKNOWN'))
if len(data):
self.frmwk.print_status('Received data output from procedure: ')
self.frmwk.print_hexdump(data)
return
def run(self, frmwk, args):
logger = frmwk.get_module_logger(self.name)
if not frmwk.serial_login(): # don't alert on failed logins
logger.warning('meter login failed')
frmwk.print_error('Meter login failed, can not execute procedure')
return
data = self.options['PARAMS']
if self.options['USEHEX']:
data = unhexlify(data)
conn = frmwk.serial_connection
errCode, data = conn.runProcedure(self.options['PROCNBR'], self.advanced_options['STDVSMFG'], data)
conn.stop()
frmwk.print_status('Finished running procedure #' + str(self.options['PROCNBR']))
frmwk.print_status('Received respose from procedure: ' + (C1219_PROC_RESULT_CODES.get(errCode) or 'UNKNOWN'))
if len(data):
frmwk.print_status('Received data output from procedure: ')
frmwk.print_hexdump(data)
return
def run(self):
conn = self.frmwk.serial_connection
data = self.options['PARAMS']
if self.options['USE_HEX']:
data = data.replace(' ', '')
hex_regex = re.compile('^([0-9a-fA-F]{2})+$')
if hex_regex.match(data) is None:
self.frmwk.print_error('Non-hex characters found in \'PARAMS\'')
return
data = binascii.a2b_hex(data)
else:
data = data.encode('utf-8')
self.frmwk.print_status('Initiating procedure ' + (C1219_PROCEDURE_NAMES.get(self.options['PROC_NUMBER']) or '#' + str(self.options['PROC_NUMBER'])))
error_code, data = conn.run_procedure(self.options['PROC_NUMBER'], self.advanced_options['STD_VS_MFG'], data)
self.frmwk.print_status('Finished running procedure #' + str(self.options['PROC_NUMBER']))
self.frmwk.print_status('Received response from procedure: ' + (C1219_PROC_RESULT_CODES.get(error_code) or 'UNKNOWN'))
if len(data):
self.frmwk.print_status('Received data output from procedure: ')
self.frmwk.print_hexdump(data)
def run(self):
conn = self.frmwk.serial_connection
logger = self.logger
mode = self.options['MODE']
mode = mode.upper()
mode = mode.replace('_', '')
mode = mode.replace(' ', '')
if mode[-4:] == 'MODE':
mode = mode[:-4]
mode_dict = C1219_METER_MODE_NAMES
if not mode in mode_dict:
self.frmwk.print_error('unknown mode, please use METERING, TEST, METERSHOP, or FACTORY')
return
logger.info('setting mode to: ' + mode)
self.frmwk.print_status('Setting Mode To: ' + mode)
mode = mode_dict[mode]
try:
result_code, response_data = conn.run_procedure(6, False, struct.pack('B', mode))
except C1218ReadTableError as error:
self.frmwk.print_exception(error)
return
except C1218WriteTableError as error:
if error.code == 4: # onp/operation not possible
self.frmwk.print_error('Meter responded that it can not set the mode to the desired type')
else:
self.frmwk.print_exception(error)
return
except C1219ProcedureError as error:
self.frmwk.print_exception(error)
return
if result_code < 2:
self.frmwk.print_good(C1219_PROC_RESULT_CODES[result_code])
else:
self.frmwk.print_error(C1219_PROC_RESULT_CODES.get(result_code, "Unknown status code: {0}".format(result_code)))