def orders_function(bot, types, message):
order = Order(message.chat.id)
if not order.is_orders():
bot.send_message(message.chat.id, inscriptions.no_orders_text)
elif order.is_orders():
markup = create_orders_markup(types, message)
bot.send_message(message.chat.id,
inscriptions.some_orders_here,
reply_markup=markup)
def test_valid_status_setter(self):
order = Order()
order.setStatus(validStatus1)
correctValue = validStatus1
self.assertEqual(
order.getStatus(),
correctValue,
msg=
f"Error in the email setter and getter values:\n\n{order.getStatus()}\n\n{correctValue}"
)
def test_valid_customerId_setter(self):
order = Order()
order.setCustomerId(validCustomerId1)
correctValue = validCustomerId1
self.assertEqual(
order.getCustomerId(),
correctValue,
msg=
f"Error in the customerId setter and getter values:\n\n{order.getCustomerId()}\n\n{correctValue}"
)
def requestOrder(postBody):
response = {}
try:
order = Order(postBody["serviceType"], postBody["pickupAddress"],
postBody["dropoffAddress"], postBody["customerId"])
orderObj = order.__dict__
client = mongoConnect()
db = client.team12_demand
orders = db.orders
publicId = orders.count_documents({}) + 1000
orderObj["publicId"] = publicId
orderId = orders.insert_one(orderObj).inserted_id
address1 = (orderObj["pickupAddress"]).replace(" ", "+")
address2 = (orderObj["dropoffAddress"]).replace(" ", "+")
#### Uncomment this block when supply is up on server ####
routeResponse = requests.get(
f"http://localhost:8081/vehicles/req?service_type={orderObj['serviceType']}&order_id={orderId}&customer_id={orderObj['customerId']}&destination={address1}"
)
# routeResponse = requests.get(f"https://supply.team12.sweispring21.tk/api/vehicles/req?service_type={orderObj['serviceType']}&order_id={orderId}&customer_id={orderObj['customerId']}&destination={address1}")
responseObj = routeResponse.json()
routeObj = responseObj["data"]
if responseObj['status'] == "OK":
order.setStatus("vehicle on route")
response = {
'status': responseObj['status'],
'data': {
"_id": orderId,
"publicId": publicId,
"status": order.getStatus(),
"routeObj": routeObj
}
}
dbRouteObj = routeObj
else:
response = {
'status': responseObj['status'],
'data': responseObj['data']
}
order.setStatus("unfulfilled")
dbRouteObj = routeObj
orders.update_one(
{"_id": orderId},
{"$set": {
"status": order.getStatus(),
"routeObj": dbRouteObj
}})
except ValueError as err:
response = {'status': 'CONFLICT', 'data': {'msg': err}}
except Exception as err:
logging.error(err)
response = {
'status': 'INTERNAL_SERVER_ERROR',
'data': {
'msg': 'Server stopped working, please try again later'
}
}
return response
def callback_data_order(bot, call):
orders = Order(call.message.chat.id)
# If order in user`s order list
for order in orders.orders:
if call.data == order[0]:
bot.send_message(call.message.chat.id,
order.return_items_note_str())
def create_orders_markup(types, message):
orders = Order(message.chat.id)
markup = types.InlineKeyboardMarkup(row_width=2)
for order in orders.orders:
item = types.InlineKeyboardButton(order[0], callback_data=order[0])
markup.add(item)
return markup
def add_order():
if request.method == 'GET':
# show create form
return render_template('addOrderForm.html')
else:
nom = request.form['orderName']
order = Order(name=nom, status='ongoing')
db.session.add(order)
db.session.commit()
return redirect(url_for('index'))
def get_amount_cost(self, date):
orders_before = [op for op in self.list_orders if op.date <= date]
if len(orders_before) > 0:
op_sum = sum(orders_before, Order())
amount = op_sum.amount
cost = op_sum.price*amount
else:
amount = 0
cost = 0.0
return amount, cost
def buy(args):
path = args.config['book-path']
# Check if the file book.json exist and if not create it
# and iniate it with '[]'
if not os.path.isfile(path):
data = "[]"
file = open(path, 'a+')
file.write(data)
file.close()
order = Order(args)
data = json.loads(open(path).read())
data.append(order.toDict())
with open(path, 'w') as outfile:
json.dump(data, outfile, indent=4)
# Display the order with a nice table
table_data = [['id', 'Exchange', 'Market', 'Price'],
[order.id, order.exchange, order.market, order.last]]
table = SingleTable(table_data)
table.title = 'Buy Order'
print(table.table)
def test_valid_order_2(self):
validOrder2 = Order(validService2, validPickup2, validDropoff2,
validCustomerId2)
orderObj = validOrder2.__dict__
match = {
'serviceType': validService2,
'pickupAddress': validPickup2,
"dropoffAddress": validDropoff2,
"customerId": validCustomerId2,
"route": None,
"status": "pending confirmation"
}
self.assertEqual(
orderObj,
match,
msg=
f"orderObj does not match\n\norderObj: {orderObj}\n\ncorrect: {match}"
)
def load_orders(self, path_orders, path_dividends, country):
print('Loading orders and dividends for {} wallet...'.format(country))
orders = pd.read_csv(path_orders, sep=';', index_col=0, header=0)
dividends = pd.read_csv(path_dividends, sep=';', index_col=0, header=0)
list_stocks = []
for ticker in orders.index.unique():
list_orders = []
for row in orders.loc[[ticker]].iterrows():
list_orders.append(
Order(row[1]['Date'], row[1]['Amount'], row[1]['Price'],
row[1]['Kind']))
list_dividends = []
if ticker in dividends.index:
for row in dividends.loc[[ticker]].iterrows():
list_dividends.append(
Dividend(row[1]['Date'], row[1]['Value'],
row[1]['Kind']))
list_stocks.append(Stock(ticker, list_orders, list_dividends))
return Wallet(list_stocks, country)
def test_valid_order_1(self):
validOrder1 = Order(validService1,
validPickup1,
validDropoff1,
validCustomerId1,
route=validRoute1)
orderObj = validOrder1.__dict__
match = {
'serviceType': validService1,
'pickupAddress': validPickup1,
"dropoffAddress": validDropoff1,
"customerId": validCustomerId1,
"route": validRoute1,
"status": "pending confirmation"
}
self.assertEqual(
orderObj,
match,
msg=
f"orderObj does not match\n\norderObj: {orderObj}\n\ncorrect: {match}"
)
def test_invalid_status_setter(self):
with self.assertRaises(
ValueError,
msg="Values passed should have raised a Value Error"):
order = Order()
order.setStatus(invalidStatus1)
from classes.pizza import *
from classes.characteristic import Ingredient, Size
from classes.order import Order
from util.pizzaUtil import *
from util.cliMsg import *
from util.cliUtil import *
if __name__ == '__main__':
print(welcomeTitle)
order = Order()
while True:
print("Pizza número {0}".format(len(order.pizzas) + 1))
while True:
sizeOption = input("{0}:".format(showPizzaSizes()))
if not isValidSize(sizeOption):
print("{0}".format(sizeSelectionError))
continue
zoneTopping = ynCliOption(zoneQuestion)
zonesQuantity = int(input(
"{0}".format(zoneOptions))) if zoneTopping else 0
pizza = pizzaFactory.getPizza(zoneTopping, zones=zonesQuantity)
order.addPizza(pizza)
setPizzaSize(pizza, sizeOption)
setPizzaIngredients(pizza, order)
pizza.showPizzaSummary()
break
continueOrder = ynCliOption(continueQuestion)
if continueOrder:
continue
else:
break
def tl_worker_new(tl_list, merged_count_dict, loop_type_order,
total_merged_count, input_settings, spatial_loop_comb,
mem_scheme, precision, layer, mac_costs):
"""
New tl_worker function to handle the multiset loop orderings.
These orderings still require a memory allocation, followed by a cost model evaluation.
"""
# Get the different MemoryNodes we need to allocate
nodes = mem_scheme.nodes
n_mem_levels = len(nodes)
# Layer
[layer_origin, layer_rounded] = layer
# Spatial unrolling
[spatial_loop, spatial_loop_fractional] = spatial_loop_comb
# Get the active and idle MAC cost
[active_mac_cost, idle_mac_cost] = mac_costs
# loop_type order ['B','K','C','OY','OX','FY','FX']
# Adjust the merged_count_dict for the first loop_type, as this got chunked in caller function
first_loop_type = loop_type_order[0]
merged_count_dict[first_loop_type] = len(tl_list[first_loop_type])
# Get the orderings for all possible loop_types (some might be non-existent)
tl_list_B = tl_list.get('B', [None])
tl_list_K = tl_list.get('K', [None])
tl_list_C = tl_list.get('C', [None])
tl_list_OY = tl_list.get('OY', [None])
tl_list_OX = tl_list.get('OX', [None])
tl_list_FY = tl_list.get('FY', [None])
tl_list_FX = tl_list.get('FX', [None])
# Get the smallest prime factor for each loop type (required for loop merging)
smallest_pfs = {
7: get_smallest_pf(tl_list_B[0]),
6: get_smallest_pf(tl_list_K[0]),
5: get_smallest_pf(tl_list_C[0]),
4: get_smallest_pf(tl_list_OY[0]),
3: get_smallest_pf(tl_list_OX[0]),
2: get_smallest_pf(tl_list_FY[0]),
1: get_smallest_pf(tl_list_FX[0])
}
# Init minimal energy and max utilization results
min_en = float('inf')
min_en_ut = 0
max_ut_en = float('inf')
max_ut = 0
# Init energy,latency,utilization collect
energy_collect = None
utilization_collect = None
latency_collect = None
save_all_tm = input_settings.tm_search_result_saving
if save_all_tm:
energy_collect = []
utilization_collect = []
latency_collect = []
# Loop through all the number of elements in each tl_list element
ctr = 0
skipped = 0
merged_set = set()
for order_B in tl_list_B:
for order_K in tl_list_K:
order_B_K = combine_orderings(order_B, order_K)
for order_C in tl_list_C:
order_B_K_C = combine_orderings(order_B_K, order_C)
for order_OY in tl_list_OY:
order_B_K_C_OY = combine_orderings(order_B_K_C, order_OY)
for order_OX in tl_list_OX:
order_B_K_C_OY_OX = combine_orderings(
order_B_K_C_OY, order_OX)
for order_FY in tl_list_FY:
order_B_K_C_OY_OX_FY = combine_orderings(
order_B_K_C_OY_OX, order_FY)
for order_FX in tl_list_FX:
ctr += 1
# Final order with all X's filled in
nonmerged_order = combine_orderings(
order_B_K_C_OY_OX_FY, order_FX)
# Merge loops of same type
merged_order = merge_loops(
nonmerged_order, smallest_pfs)
# Check if merged order was already processed
hashed = hash(merged_order)
if hashed in merged_set:
skipped += 1
continue
else:
merged_set.add(hashed)
################################## MEMORY ALLOCATION ##################################
# Initialize Order object
order = Order(merged_order, spatial_loop,
layer_origin, input_settings,
n_mem_levels)
# Loop through all the nodes in each level to allocate the LPFs to the memories
for level in range(n_mem_levels):
if level == n_mem_levels - 1:
# If the level is the last level in the hierarchy, allocate all remaning LPFs.
allocated_order = order.allocate_remaining(
)
break
for node in nodes[level]:
order.allocate_memory(node, level)
# print(merged_order)
# print('W\t', allocated_order['W'])
# print('I\t', allocated_order['I'])
# print('O\t', allocated_order['O'])
# if merged_order == ((5, 2), (5, 288), (4, 7), (6, 6)):
# print(allocated_order['I'])
################################## COST MODEL EVALUATION ##################################
# temporal_loop = TemporalLoopLight(layer_rounded, allocated_order, spatial_loop, order.loop_cycles, order.irrelevant_loop)
# loop = LoopLight(layer_rounded, temporal_loop, spatial_loop, input_settings.precision,
# input_settings.fixed_temporal_mapping)
temporal_loop = cls.TemporalLoop.extract_loop_info(
layer_rounded, allocated_order,
spatial_loop)
loop = cls.Loop.extract_loop_info(
layer_rounded, temporal_loop, spatial_loop,
input_settings.precision,
input_settings.fixed_temporal_mapping)
# Greedy mapping: loop_fractional required
if input_settings.spatial_unrolling_mode in [
4, 5
]:
############# Advanced User Configuration #############
# mem_energy_saving_when_BW_under_utilized = True
#######################################################
temporal_loop_fractional = cls.TemporalLoop.extract_loop_info(
layer_origin, allocated_order,
spatial_loop_fractional)
loop_fractional = cls.Loop.extract_loop_info(
layer_origin, temporal_loop_fractional,
spatial_loop_fractional,
input_settings.precision,
input_settings.fixed_temporal_mapping)
# if mem_energy_saving_when_BW_under_utilized is False:
# loop_fractional = mem_access_count_correct(loop_fractional, loop)
else:
loop_fractional = loop
utilization = cls.Utilization.get_utilization(
layer_rounded, temporal_loop,
spatial_loop_comb, loop,
input_settings.mac_array_info,
mem_scheme.mem_size, mem_scheme.mem_share,
mem_scheme.mem_type,
input_settings.mac_array_stall,
input_settings.precision,
mem_scheme.mem_bw)
operand_cost = {'W': [], 'I': [], 'O': []}
total_cost_layer = 0
for operand in ['W', 'I', 'O']:
for level in range(
0, len(allocated_order[operand])):
operand_cost[operand].append(
cmf.get_operand_level_energy_cost(
operand, level,
mem_scheme.mem_cost,
input_settings.mac_array_info,
0, loop_fractional,
mem_scheme.mem_fifo,
mem_scheme,
input_settings.precision,
utilization, False))
total_cost_layer += np.sum(
operand_cost[operand])
total_cost_layer += active_mac_cost + idle_mac_cost
############################# COMPARISON WITH BEST SO FAR #############################
en = total_cost_layer
ut = utilization.mac_utilize_no_load
if (en < min_en) or (en == min_en
and ut > min_en_ut):
min_en = en
min_en_ut = ut
min_en_order = allocated_order
if (ut > max_ut) or (ut == max_ut
and en < max_ut_en):
max_ut = ut
max_ut_en = en
max_ut_order = allocated_order
if save_all_tm:
energy_collect.append(int(en))
utilization_collect.append(ut)
latency_collect.append(
utilization.latency_no_load)
# if ctr % 1000 == 0:
# print(ctr, "Execution time =", time.time()-t_start)
# t_start = time.time()
return (min_en, min_en_ut, min_en_order, max_ut_en, max_ut, max_ut_order,
energy_collect, utilization_collect, latency_collect)
from classes.order import Order
# create prodcut model
pm = ProductModel(db)
# create a product
# product = Product("Pinon",5000,"Togo")
# insert the product
# product = pm.insertProduct(product)
products = pm.getProducts()
product_list = []
for product in products:
product_list.append(
Product(product['name'], product['price'], product['country'],
product['_id']))
cm = CustomerModel(db)
customer = Customer("Serge", "Kossi", "M", "92639417")
customer = cm.insertCustomer(customer)
om = OrderModel(db)
order = Order(customer)
for product in product_list:
order.add_product(product)
order = om.insertOrder(order)
print(order)
def update_amount(self):
op_sum = sum(self.list_orders, Order())
self.amount = op_sum.amount
self.cost = op_sum.price*self.amount
def test_invalid_customerId_setter(self):
with self.assertRaises(
ValueError,
msg="Values passed should have raised a Value Error"):
order = Order()
order.setCustomerId(invalidCustomerId1)
def test_invalid_order_2(self):
with self.assertRaises(
ValueError,
msg="Values passed should have raised a Value Error"):
Order(invalidService2, invalidPickup2, invalidDropoff2,
invalidCustomerId2, invalidStatus2)