def _run(self, commands):
for cmd in commands:
self._debug('run command "{0}"'.format(cmd))
try:
with Capture() as err:
with Capture() as out:
if self._verbose:
echo_success('running: {0}'.format(cmd))
command_done = Event()
def redirect():
while not command_done.is_set():
try:
for line in out:
echo_info(line.strip())
except TypeError:
pass
try:
for line in err:
warn(line.strip())
except TypeError:
pass
sleep(0.05)
p = run(cmd,
stdout=out,
stderr=err,
env=self._env,
async=True)
if self._verbose:
Thread(target=redirect).start()
try:
p.wait()
finally:
# make sure the console redirect thread is properly shutting down
command_done.set()
except OSError:
error(
'command: "{0}" could not be executed (not found?)'.format(
cmd))
def cli(update, dry_run, quiet, pretty_print, strict, list_targets,
stop_on_error, config, targets_path, targets, **kwargs):
"""
the main **run** method, responsible for creating the parser and executing the main logic in
**cleanmymac**
:param bool update: perform update of targets (if applicable)
:param bool dry_run: do not execute the actions, but log the result
:param bool quiet: quiet mode (no output), show a progressbar instead
:param bool pretty_print: enable pretty printing with colors
:param bool strict: if set enforce strict(er) rules when validating targets
:param bool list_targets: list the installed targets
:param bool stop_on_error: abort the execution on first error
:param str config: the configuration path
:param str targets_path: extra targets paths
:param list targets: the targets
"""
disable_logger('sarge')
targets = tuple([target.lower() for target in targets])
set_pretty_print(pretty_print)
debug_param('update', update)
debug_param('dry run', dry_run)
debug_param('quiet mode', quiet)
debug_param('pretty print', pretty_print)
debug_param('strict mode', strict)
debug_param('list available targets', list_targets)
debug_param('stop on error', stop_on_error)
debug_param('global config path', config)
debug_param('extra targets path', targets_path)
debug_param('targets', targets)
debug('')
all_targets = dict(iter_targets())
if is_debug():
debug("Detailed information about registered targets")
debug(get_targets_as_table(simple=False, fancy=False))
if dry_run:
verbose = True
else:
verbose = not quiet
debug_param('verbose', verbose)
if targets:
target_names = set(targets)
else:
target_names = set(all_targets.keys())
if update:
echo_warn(
'updating may result in an increase of the total space taken by the cleanup targets',
verbose=verbose)
echo_info('found {0} registered cleanup targets'.format(len(all_targets)),
verbose=verbose)
config = get_options(path=config)
# register extra targets if any
for pth in _config_targets_path(config):
register_yaml_targets(pth)
if targets_path and os.path.isdir(targets_path):
register_yaml_targets(targets_path)
if list_targets:
echo_warn(get_targets_as_table(simple=True, fancy=True))
else:
with progressbar(verbose,
all_targets.items(),
label='Processing cleanup targets:',
width=40) as all_targets_bar:
free_space_before = get_disk_usage('/', unit=UNIT_MB).free
for name, target_initializer in all_targets_bar:
echo_info(_HORIZONTAL_RULE, verbose=verbose)
if name not in target_names:
debug('skipping target "{0}"'.format(name))
continue
echo_target('\ncleaning: {0}'.format(name.upper()),
verbose=verbose)
target_cfg = config[name] if name in config else None
debug("got target configuration: {0}".format(
pformat(target_cfg)))
try:
target = target_initializer(target_cfg,
update=update,
verbose=verbose,
strict=strict)
if not isinstance(target, Target):
error(
'expected an instance of Target, instead got: {0}'.
format(target))
continue
if dry_run:
echo_warn(target.describe())
else:
target()
except Exception, ex:
error(
'could not cleanup target "{0}". Reason:\n{1}'.format(
name, ex))
if stop_on_error:
break
if not verbose:
sleep(
PROGRESSBAR_ADVANCE_DELAY
) # nicer progress bar display for fast executing targets
free_space_after = get_disk_usage('/', unit=UNIT_MB).free
if not dry_run:
echo_info('\ncleanup complete', verbose=verbose)
echo_success('\nfreed {0:.3f} MB of disk space'.format(
free_space_after - free_space_before),
verbose=True,
nl=verbose)
def cli(update, dry_run, quiet, pretty_print, strict, list_targets, stop_on_error, config, targets_path, targets, **kwargs):
"""
the main **run** method, responsible for creating the parser and executing the main logic in
**cleanmymac**
:param bool update: perform update of targets (if applicable)
:param bool dry_run: do not execute the actions, but log the result
:param bool quiet: quiet mode (no output), show a progressbar instead
:param bool pretty_print: enable pretty printing with colors
:param bool strict: if set enforce strict(er) rules when validating targets
:param bool list_targets: list the installed targets
:param bool stop_on_error: abort the execution on first error
:param str config: the configuration path
:param str targets_path: extra targets paths
:param list targets: the targets
"""
disable_logger('sarge')
targets = tuple([target.lower() for target in targets])
set_pretty_print(pretty_print)
debug_param('update', update)
debug_param('dry run', dry_run)
debug_param('quiet mode', quiet)
debug_param('pretty print', pretty_print)
debug_param('strict mode', strict)
debug_param('list available targets', list_targets)
debug_param('stop on error', stop_on_error)
debug_param('global config path', config)
debug_param('extra targets path', targets_path)
debug_param('targets', targets)
debug('')
all_targets = dict(iter_targets())
if is_debug():
debug("Detailed information about registered targets")
debug(get_targets_as_table(simple=False, fancy=False))
if dry_run:
verbose = True
else:
verbose = not quiet
debug_param('verbose', verbose)
if targets:
target_names = set(targets)
else:
target_names = set(all_targets.keys())
if update:
echo_warn('updating may result in an increase of the total space taken by the cleanup targets', verbose=verbose)
echo_info('found {0} registered cleanup targets'.format(len(all_targets)), verbose=verbose)
config = get_options(path=config)
# register extra targets if any
for pth in _config_targets_path(config):
register_yaml_targets(pth)
if targets_path and os.path.isdir(targets_path):
register_yaml_targets(targets_path)
if list_targets:
echo_warn(get_targets_as_table(simple=True, fancy=True))
else:
with progressbar(verbose, all_targets.items(), label='Processing cleanup targets:',
width=40) as all_targets_bar:
free_space_before = get_disk_usage('/', unit=UNIT_MB).free
for name, target_initializer in all_targets_bar:
echo_info(_HORIZONTAL_RULE, verbose=verbose)
if name not in target_names:
debug('skipping target "{0}"'.format(name))
continue
echo_target('\ncleaning: {0}'.format(name.upper()), verbose=verbose)
target_cfg = config[name] if name in config else None
debug("got target configuration: {0}".format(pformat(target_cfg)))
try:
target = target_initializer(target_cfg, update=update, verbose=verbose, strict=strict)
if not isinstance(target, Target):
error('expected an instance of Target, instead got: {0}'.format(target))
continue
if dry_run:
echo_warn(target.describe())
else:
target()
except Exception, ex:
error('could not cleanup target "{0}". Reason:\n{1}'.format(name, ex))
if stop_on_error:
break
if not verbose:
sleep(PROGRESSBAR_ADVANCE_DELAY) # nicer progress bar display for fast executing targets
free_space_after = get_disk_usage('/', unit=UNIT_MB).free
if not dry_run:
echo_info('\ncleanup complete', verbose=verbose)
echo_success('\nfreed {0:.3f} MB of disk space'.format(free_space_after - free_space_before),
verbose=True, nl=verbose)