def prox(long_id, short_id, tag_id=0, action=3, partition_bitmap=0):
"""action_id = 3
if action.lower() == "away":
action_id = 3
elif action.lower() == "home":
action_id = 2
elif action.lower() == "disarm":
action_id = 1
elif action.lower() == "away_latchkey":
action_id = 4
elif action.lower() == "arm_part":
action_id = 5
elif action.lower() == "quick_away":
action_id = 6
elif action.lower() == "quick_home":
action_id = 7
elif action.lower() == "arm_instant":
action_id = 8
elif action.lower() == "check_code":
action_id = 9
else:
print "Wrong event was specified for TAG"
sys.exit(0)
"""
packet = prutils.make_device_packet(
long_id,
short_id,
Config.SET,
73,
chr(partition_bitmap) + chr(action) + "\x28\x00\x00\x00\x00" + chr(tag_id) + "\x00\x00\x00",
)
return packet
def hello(long_id, short_id, command, notification_period):
# command:
# 0 - Ping
# 1 - Check if enrolled
packet = prutils.make_device_packet(long_id, short_id, Config.REPORT, 64, chr(command), notification_period)
return packet
def volume(long_id, short_id, level):
# level:
# 1 - lowest level
# 254 - highest level
packet = prutils.make_device_packet(long_id, short_id, Config.REPORT, 96, chr(level))
return packet
def power_mode(long_id, short_id, mode):
# mode:
# 0 - Power Save
# 1 - Active
packet = prutils.make_device_packet(long_id, short_id, Config.REPORT, 238, chr(mode))
return packet
def hello(long_id, short_id, command, notification_period):
# command:
# 0 - Ping
# 1 - Check if enrolled
packet = prutils.make_device_packet(long_id, short_id, Config.REPORT, 64,
chr(command), notification_period)
return packet
def volume(long_id, short_id, level):
# level:
# 1 - lowest level
# 254 - highest level
packet = prutils.make_device_packet(long_id, short_id, Config.REPORT, 96,
chr(level))
return packet
def change_transmission_privileges(long_id, short_id, restricted_bitmap, timeout_sec):
# restricted_bitmap - bitmap of restricted slots (8 bytes):
# 0 - not restricted
# 1 - slot is restricted for transmission
# timeout_sec need to be 2 bytes length
timeout_sec = prutils.num_to_chars(timeout_sec, 2)
packet = prutils.make_device_packet(long_id, short_id, Config.REPORT, 63, restricted_bitmap + timeout_sec)
return packet
def file_info(long_id, short_id, film_id, row, file_status, prime_file_id, secondary_file_id, frame_number, file_type,\
film_type, time_stamp, crc, index, zone, file_size, sequence=-1):
data = chr(film_id) + chr(row) + chr(file_status) + chr(prime_file_id) + chr(secondary_file_id) + chr(frame_number) + \
chr(file_type) + chr(film_type) + prutils.num_to_chars(time_stamp, 4, 0) + prutils.num_to_chars(crc, 2 ,0) + \
chr(index) + chr(zone) + prutils.num_to_chars(file_size, 2, 0)
packet = prutils.make_device_packet(long_id, short_id, Config.REPLY, 181,
data, 0, 0, 0, 0, 1, 4, sequence)
return packet
def change_listen_mode(long_id, short_id, mode, timeout_sec):
# mode:
# 0 - Notification Only
# 1 - Always Open
# 255 - Default
# timeout_sec need to be 2 bytes length
timeout_sec = prutils.num_to_chars(timeout_sec, 2)
packet = prutils.make_device_packet(long_id, short_id, Config.REPORT, 61, chr(mode) + timeout_sec)
return packet
def change_transmission_privileges(long_id, short_id, restricted_bitmap,
timeout_sec):
# restricted_bitmap - bitmap of restricted slots (8 bytes):
# 0 - not restricted
# 1 - slot is restricted for transmission
# timeout_sec need to be 2 bytes length
timeout_sec = prutils.num_to_chars(timeout_sec, 2)
packet = prutils.make_device_packet(long_id, short_id, Config.REPORT, 63,
restricted_bitmap + timeout_sec)
return packet
def change_listen_mode(long_id, short_id, mode, timeout_sec):
# mode:
# 0 - Notification Only
# 1 - Always Open
# 255 - Default
# timeout_sec need to be 2 bytes length
timeout_sec = prutils.num_to_chars(timeout_sec, 2)
packet = prutils.make_device_packet(long_id, short_id, Config.REPORT, 61,
chr(mode) + timeout_sec)
return packet
def change_notification_period(long_id, short_id, mode, timeout_sec):
# mode:
# 0 - 1 second
# 1 - 2 seconds
# 2 - 4 seconds
# 3 - 8 seconds
# 4 - 16 seconds
# 5 - 32 seconds
# 6 - 64 seconds
# 255 - Default
# timeout_sec need to be 2 bytes length
timeout_sec = prutils.num_to_chars(timeout_sec, 2)
packet = prutils.make_device_packet(long_id, short_id, Config.REPORT, 62, chr(mode) + timeout_sec)
return packet
def change_notification_period(long_id, short_id, mode, timeout_sec):
# mode:
# 0 - 1 second
# 1 - 2 seconds
# 2 - 4 seconds
# 3 - 8 seconds
# 4 - 16 seconds
# 5 - 32 seconds
# 6 - 64 seconds
# 255 - Default
# timeout_sec need to be 2 bytes length
timeout_sec = prutils.num_to_chars(timeout_sec, 2)
packet = prutils.make_device_packet(long_id, short_id, Config.REPORT, 62,
chr(mode) + timeout_sec)
return packet
def change_panel_state(long_id, short_id, part_bitmap, action, user_code):
# part_bitmap - Partition (bitmap):
# 0 - no Partition
# action:
# 1 - Disarm
# 2 - Arm Home
# 3 - Arm Away
# 4 - Arm Latchkey
# 5 - Arm Part
# 6 - Quick Away
# 7 - Quick Home
# 8 - Arm Instant
# 9 - Check Code
# user_code - 4 digits user code:
# 1st digit sent 1st, example - user code 1234: code byte 0: 0x12, code byte 1: 0x34
# 0xAAAA - no user code
user_code = prutils.str_to_bcd(str(user_code))
packet = prutils.make_device_packet(
long_id, short_id, Config.REPORT, 69,
chr(part_bitmap) + chr(action) + user_code)
return packet
def change_panel_state(long_id, short_id, part_bitmap, action, user_code):
# part_bitmap - Partition (bitmap):
# 0 - no Partition
# action:
# 1 - Disarm
# 2 - Arm Home
# 3 - Arm Away
# 4 - Arm Latchkey
# 5 - Arm Part
# 6 - Quick Away
# 7 - Quick Home
# 8 - Arm Instant
# 9 - Check Code
# user_code - 4 digits user code:
# 1st digit sent 1st, example - user code 1234: code byte 0: 0x12, code byte 1: 0x34
# 0xAAAA - no user code
user_code = prutils.str_to_bcd(str(user_code))
packet = prutils.make_device_packet(
long_id, short_id, Config.REPORT, 69, chr(part_bitmap) + chr(action) + user_code
)
return packet
def file_info(
long_id,
short_id,
film_id,
row,
file_status,
prime_file_id,
secondary_file_id,
frame_number,
file_type,
film_type,
time_stamp,
crc,
index,
zone,
file_size,
sequence=-1,
):
data = (
chr(film_id)
+ chr(row)
+ chr(file_status)
+ chr(prime_file_id)
+ chr(secondary_file_id)
+ chr(frame_number)
+ chr(file_type)
+ chr(film_type)
+ prutils.num_to_chars(time_stamp, 4, 0)
+ prutils.num_to_chars(crc, 2, 0)
+ chr(index)
+ chr(zone)
+ prutils.num_to_chars(file_size, 2, 0)
)
packet = prutils.make_device_packet(long_id, short_id, Config.REPLY, 181, data, 0, 0, 0, 0, 1, 4, sequence)
return packet
def film_info(
long_id,
short_id,
film_id,
film_status,
film_type,
pre_alarm_length,
post_alarm_length,
frame_rate,
time_stamp,
index,
zone,
files_amount,
):
# film_status:
# 0 does not exist
# 1 existing, closed and permitted for delete
# 2 existing, opened film
# 3 existing, closed film
# 4 error
# print long_id, short_id, film_id, film_status, film_type, pre_alarm_length, post_alarm_length,\
# frame_rate, time_stamp, index, zone, files_amount
# return
data = chr(film_id)
data += chr(film_status)
data += chr(film_type)
data += chr(pre_alarm_length)
data += chr(post_alarm_length)
data += chr(frame_rate)
data += prutils.num_to_chars(time_stamp, 4, 0)
data += chr(index)
data += chr(zone)
data += chr(files_amount)
packet = prutils.make_device_packet(long_id, short_id, Config.REPORT, 180, data, 0, 1, 1, 1, 0)
return packet
def passive_motion_with_index(long_id, short_id, index):
packet = prutils.make_device_packet(long_id, short_id, Config.REPORT, 19,
chr(Config.VIOLATED) + chr(index))
return packet
def fire_alarm(long_id, short_id, open):
packet = prutils.make_device_packet(long_id, short_id, Config.REPORT, 34,
chr(open))
return packet
def gas_sensor_trouble(long_id, short_id, open):
packet = prutils.make_device_packet(long_id, short_id, Config.REPORT, 52, chr(open))
return packet
def jamming(long_id, short_id, open):
packet = prutils.make_device_packet(long_id, short_id, Config.REPORT, 48, chr(open))
return packet
def ac_fail(long_id, short_id, open):
packet = prutils.make_device_packet(long_id, short_id, Config.REPORT, 41, chr(open))
return packet
def clear_alarm_memory(long_id, short_id):
packet = prutils.make_device_packet(long_id, short_id, Config.REPORT, 239, chr(Config.NO_VALUE))
return packet
def partition(long_id, short_id, partition_bitmap=0):
packet = prutils.make_device_packet(long_id, short_id, Config.SET, 118, chr(partition_bitmap))
return packet
def supervision(long_id, short_id, open):
packet = prutils.make_device_packet(long_id, short_id, Config.REPORT, 116,
chr(open))
return packet
def tamper(long_id, short_id, open):
packet = prutils.make_device_packet(long_id, short_id, Config.REPORT, 39,
chr(open))
return packet
def aux_simple(long_id, short_id, open):
packet = prutils.make_device_packet(long_id, short_id, Config.SET, 74,
chr(open))
return packet
def low_battery(long_id, short_id, open):
packet = prutils.make_device_packet(long_id, short_id, Config.REPORT, 40,
chr(open))
return packet
def ac_fail(long_id, short_id, open):
packet = prutils.make_device_packet(long_id, short_id, Config.REPORT, 41,
chr(open))
return packet
def smoke_trouble(long_id, short_id, open):
packet = prutils.make_device_packet(long_id, short_id, Config.REPORT, 46,
chr(open))
return packet
def jamming(long_id, short_id, open):
packet = prutils.make_device_packet(long_id, short_id, Config.REPORT, 48,
chr(open))
return packet
def flood(long_id, short_id, open):
packet = prutils.make_device_packet(long_id, short_id, Config.REPORT, 16,
chr(open))
return packet
def heat_sensor(long_id, short_id, open):
packet = prutils.make_device_packet(long_id, short_id, Config.REPORT, 10,
chr(open))
return packet
def partition(long_id, short_id, partition_bitmap=0):
packet = prutils.make_device_packet(long_id, short_id, Config.SET, 118,
chr(partition_bitmap))
return packet
def device_type(long_id, short_id, type, subtype):
packet = prutils.make_device_packet(long_id, short_id, Config.REPORT, 237, chr(type) + chr(subtype))
return packet
def device_type(long_id, short_id, type, subtype):
packet = prutils.make_device_packet(long_id, short_id, Config.REPORT, 237,
chr(type) + chr(subtype))
return packet
def probe_disconnected(long_id, short_id, open):
packet = prutils.make_device_packet(long_id, short_id, Config.REPORT, 50,
chr(open))
return packet
def clear_alarm_memory(long_id, short_id):
packet = prutils.make_device_packet(long_id, short_id, Config.REPORT, 239,
chr(Config.NO_VALUE))
return packet
def smoke_trouble(long_id, short_id, open):
packet = prutils.make_device_packet(long_id, short_id, Config.REPORT, 46, chr(open))
return packet
def update(long_id, short_id):
packet = prutils.make_device_packet(long_id, short_id, Config.REPORT, 253,
chr(Config.NO_VALUE))
return packet
def probe_disconnected(long_id, short_id, open):
packet = prutils.make_device_packet(long_id, short_id, Config.REPORT, 50, chr(open))
return packet
def glass_break(long_id, short_id):
packet = prutils.make_device_packet(long_id, short_id, Config.REPORT, 6,
chr(Config.VIOLATED))
return packet
def emergency(long_id, short_id, open):
packet = prutils.make_device_packet(long_id, short_id, Config.REPORT, 35,
chr(open))
return packet
def aux(long_id, short_id, open):
bMask = 0xFF * open # Open all 8 auxilary inputs, according to mask 0b11111111 = 0xFF
packet = prutils.make_device_packet(long_id, short_id, Config.REPORT, 17, chr(bMask))
return packet
def temperature(long_id, short_id, temperature):
temperature = int(((temperature + 40.0) * 2) + 1)
packet = prutils.make_device_packet(long_id, short_id, Config.REPORT, 24,
chr(temperature))
return packet
def passive_motion_with_index(long_id, short_id, index):
packet = prutils.make_device_packet(long_id, short_id, Config.REPORT, 19, chr(Config.VIOLATED) + chr(index))
return packet
def aux(long_id, short_id, open):
bMask = 0xFF * open #Open all 8 auxilary inputs, according to mask 0b11111111 = 0xFF
packet = prutils.make_device_packet(long_id, short_id, Config.REPORT, 17,
chr(bMask))
return packet
def temperature(long_id, short_id, temperature):
temperature = int(((temperature + 40.0) * 2) + 1)
packet = prutils.make_device_packet(long_id, short_id, Config.REPORT, 24, chr(temperature))
return packet
def aux_simple(long_id, short_id, open):
packet = prutils.make_device_packet(long_id, short_id, Config.SET, 74, chr(open))
return packet
def fire_alarm(long_id, short_id, open):
packet = prutils.make_device_packet(long_id, short_id, Config.REPORT, 34, chr(open))
return packet
def supervision(long_id, short_id, open):
packet = prutils.make_device_packet(long_id, short_id, Config.REPORT, 116, chr(open))
return packet
def emergency(long_id, short_id, open):
packet = prutils.make_device_packet(long_id, short_id, Config.REPORT, 35, chr(open))
return packet
def show_locally_link_quality(long_id, short_id, enable):
action = Config.ENABLE
if enable == 0:
action = Config.DISABLE
packet = prutils.make_device_packet(long_id, short_id, Config.REPORT, 142, chr(action))
return packet
def tamper(long_id, short_id, open):
packet = prutils.make_device_packet(long_id, short_id, Config.REPORT, 39, chr(open))
return packet
def switch_magnetic(long_id, short_id, open):
packet = prutils.make_device_packet(long_id, short_id, Config.REPORT, 8,
chr(open))
return packet
def low_battery(long_id, short_id, open):
packet = prutils.make_device_packet(long_id, short_id, Config.REPORT, 40, chr(open))
return packet
def update(long_id, short_id):
packet = prutils.make_device_packet(long_id, short_id, Config.REPORT, 253, chr(Config.NO_VALUE))
return packet
def gas_sensor_trouble(long_id, short_id, open):
packet = prutils.make_device_packet(long_id, short_id, Config.REPORT, 52,
chr(open))
return packet
def flood(long_id, short_id, open):
packet = prutils.make_device_packet(long_id, short_id, Config.REPORT, 16, chr(open))
return packet
def active_barrier(long_id, short_id):
packet = prutils.make_device_packet(long_id, short_id, Config.REPORT, 4,
chr(Config.VIOLATED))
return packet