def setup_ntp(ptfhost, duthost):
"""setup ntp client and server"""
# enable ntp server
ptfhost.service(name="ntp", state="started")
# setup ntp on dut to sync with ntp server
config_facts = duthost.config_facts(host=duthost.hostname, source="running")['ansible_facts']
ntp_servers = config_facts.get('NTP_SERVER', {})
for ntp_server in ntp_servers:
duthost.command("config ntp del %s" % ntp_server)
ptfip = ptfhost.host.options['inventory_manager'].get_host(ptfhost.hostname).vars['ansible_host']
duthost.command("config ntp add %s" % ptfip)
wait_until(120, 5, check_ntp_status, ptfhost)
yield
# stop ntp server
ptfhost.service(name="ntp", state="stopped")
# reset ntp client configuration
duthost.command("config ntp del %s" % ptfip)
for ntp_server in ntp_servers:
duthost.command("config ntp add %s" % ntp_server)
def setup_reboot_standby(self, duthost2, localhost, delay=10, timeout=180):
dut2_ports = natsorted(
g_vars['dut2_port_alias']
['port_name_map'].keys())[:len(g_vars['dut2_all_interfaces'])]
for port in dut2_ports:
duthost2.shell("config interface shutdown {}".format(port))
duthost2.shell("config save -y")
duthost2.shell("nohup reboot &", module_ignore_errors=True)
time.sleep(20)
yield
# waiting for ssh to startup
dut_ip = duthost2.host.options['inventory_manager'].get_host(
duthost2.hostname).address
localhost.wait_for(host=dut_ip,
port=SONIC_SSH_PORT,
state='started',
search_regex=SONIC_SSH_REGEX,
delay=delay,
timeout=timeout)
wait_until(120, 10, duthost2.critical_services_fully_started)
for port in dut2_ports:
duthost2.shell("config interface startup {}".format(port))
duthost2.shell("config save -y")
time.sleep(5)
def turn_off_psu_and_check_thermal_control(dut, psu_ctrl, psu, mocker):
"""
@summary: Turn off PSUs, check all FAN speed are set to 100% according to thermal
control policy file.
"""
logging.info("Turn off PSU %s" % str(psu["psu_id"]))
psu_ctrl.turn_off_psu(psu["psu_id"])
time.sleep(5)
psu_under_test = None
psu_line_pattern = re.compile(r"PSU\s+\d+\s+(OK|NOT OK|NOT PRESENT)")
cli_psu_status = dut.command(CMD_PLATFORM_PSUSTATUS)
for line in cli_psu_status["stdout_lines"][2:]:
assert psu_line_pattern.match(line), "Unexpected PSU status output"
fields = line.split()
if fields[2] != "OK":
psu_under_test = fields[1]
assert psu_under_test is not None, "No PSU is turned off"
logging.info('Wait and check all FAN speed turn to 100%...')
wait_until(THERMAL_CONTROL_TEST_WAIT_TIME,
THERMAL_CONTROL_TEST_CHECK_INTERVAL, mocker.check_all_fan_speed,
100)
psu_ctrl.turn_on_psu(psu["psu_id"])
def test_thermal_control_fan_status(testbed_devices, mocker_factory):
"""
@summary: Make FAN absence, over speed and under speed, check logs and LED color.
"""
dut = testbed_devices["dut"]
loganalyzer = LogAnalyzer(ansible_host=dut, marker_prefix='thermal_control')
loganalyzer.load_common_config()
with ThermalPolicyFileContext(dut, THERMAL_POLICY_VALID_FILE):
fan_mocker = mocker_factory(dut, 'FanStatusMocker')
if fan_mocker is None:
pytest.skip("No FanStatusMocker for %s, skip rest of the testing in this case" % dut.facts['asic_type'])
logging.info('Mock FAN status data...')
fan_mocker.mock_data() # make data random
restart_thermal_control_daemon(dut)
wait_until(THERMAL_CONTROL_TEST_WAIT_TIME, THERMAL_CONTROL_TEST_CHECK_INTERVAL, fan_mocker.check_all_fan_speed,
60)
check_thermal_algorithm_status(dut, mocker_factory, False)
single_fan_mocker = mocker_factory(dut, 'SingleFanMocker')
time.sleep(THERMAL_CONTROL_TEST_WAIT_TIME)
if single_fan_mocker.is_fan_removable():
loganalyzer.expect_regex = [LOG_EXPECT_FAN_REMOVE_RE]
with loganalyzer:
logging.info('Mocking an absence FAN...')
single_fan_mocker.mock_absence()
check_cli_output_with_mocker(dut, single_fan_mocker, CMD_PLATFORM_FANSTATUS, THERMAL_CONTROL_TEST_WAIT_TIME)
loganalyzer.expect_regex = [LOG_EXPECT_FAN_REMOVE_CLEAR_RE]
with loganalyzer:
logging.info('Make the absence FAN back to presence...')
single_fan_mocker.mock_presence()
check_cli_output_with_mocker(dut, single_fan_mocker, CMD_PLATFORM_FANSTATUS, THERMAL_CONTROL_TEST_WAIT_TIME)
loganalyzer.expect_regex = [LOG_EXPECT_FAN_OVER_SPEED_RE]
with loganalyzer:
logging.info('Mocking an over speed FAN...')
single_fan_mocker.mock_over_speed()
check_cli_output_with_mocker(dut, single_fan_mocker, CMD_PLATFORM_FANSTATUS, THERMAL_CONTROL_TEST_WAIT_TIME)
loganalyzer.expect_regex = [LOG_EXPECT_FAN_OVER_SPEED_CLEAR_RE]
with loganalyzer:
logging.info('Make the over speed FAN back to normal...')
single_fan_mocker.mock_normal_speed()
check_cli_output_with_mocker(dut, single_fan_mocker, CMD_PLATFORM_FANSTATUS, THERMAL_CONTROL_TEST_WAIT_TIME)
loganalyzer.expect_regex = [LOG_EXPECT_FAN_UNDER_SPEED_RE]
with loganalyzer:
logging.info('Mocking an under speed FAN...')
single_fan_mocker.mock_under_speed()
check_cli_output_with_mocker(dut, single_fan_mocker, CMD_PLATFORM_FANSTATUS, THERMAL_CONTROL_TEST_WAIT_TIME)
loganalyzer.expect_regex = [LOG_EXPECT_FAN_UNDER_SPEED_CLEAR_RE]
with loganalyzer:
logging.info('Make the under speed FAN back to normal...')
single_fan_mocker.mock_normal_speed()
check_cli_output_with_mocker(dut, single_fan_mocker, CMD_PLATFORM_FANSTATUS, THERMAL_CONTROL_TEST_WAIT_TIME)
def test_set_psu_fan_speed(duthost, mocker_factory):
hwsku = duthost.facts["hwsku"]
psu_num = SWITCH_MODELS[hwsku]['psus']['number']
hot_swappable = SWITCH_MODELS[hwsku]['psus']['hot_swappable']
if not hot_swappable:
pytest.skip(
'The SKU {} does not support this test case.'.format(hwsku))
logging.info('Create mocker, it may take a few seconds...')
single_fan_mocker = mocker_factory(duthost, 'SingleFanMocker')
logging.info('Mock FAN absence...')
single_fan_mocker.mock_absence()
assert wait_until(THERMAL_CONTROL_TEST_WAIT_TIME, THERMAL_CONTROL_TEST_CHECK_INTERVAL, check_cooling_cur_state, duthost, 10, operator.eq), \
'Current cooling state is {}'.format(get_cooling_cur_state(duthost))
logging.info('Wait {} seconds for the policy to take effect...'.format(
THERMAL_CONTROL_TEST_CHECK_INTERVAL))
time.sleep(THERMAL_CONTROL_TEST_CHECK_INTERVAL)
full_speeds = []
for index in range(psu_num):
speed = get_psu_speed(duthost, index)
full_speeds.append(speed)
logging.info('Full speed={}'.format(full_speeds))
logging.info('Mock FAN presence...')
single_fan_mocker.mock_presence()
assert wait_until(THERMAL_CONTROL_TEST_WAIT_TIME, THERMAL_CONTROL_TEST_CHECK_INTERVAL, check_cooling_cur_state, duthost, 10, operator.ne), \
'Current cooling state is {}'.format(get_cooling_cur_state(duthost))
logging.info('Wait {} seconds for the policy to take effect...'.format(
THERMAL_CONTROL_TEST_CHECK_INTERVAL))
time.sleep(THERMAL_CONTROL_TEST_CHECK_INTERVAL)
cooling_cur_state = get_cooling_cur_state(duthost)
logging.info('Cooling level changed to {}'.format(cooling_cur_state))
current_speeds = []
for index in range(psu_num):
speed = get_psu_speed(duthost, index)
current_speeds.append(speed)
logging.info('Current speed={}'.format(current_speeds))
index = 0
if cooling_cur_state < 6:
cooling_cur_state = 6
expect_multiple = float(10) / cooling_cur_state
while index < psu_num:
full_speed = full_speeds[index]
current_speed = current_speeds[index]
index += 1
if not full_speed or not current_speed:
continue
actual_multiple = float(full_speed) / current_speed
if expect_multiple > actual_multiple:
assert actual_multiple > expect_multiple * (1 -
PSU_SPEED_TOLERANCE)
elif expect_multiple < actual_multiple:
assert actual_multiple < expect_multiple * (1 +
PSU_SPEED_TOLERANCE)
def __verify_lag_minlink(self,
host,
lag_name,
intf,
neighbor_intf,
po_interfaces,
po_flap,
deselect_time,
wait_timeout=30):
delay = 5
try:
host.shutdown(neighbor_intf)
# Let PortalChannel react to neighbor interface shutdown
time.sleep(deselect_time)
# Verify PortChannel interfaces are up correctly
for po_intf in po_interfaces.keys():
if po_intf != intf:
command = 'bash -c "teamdctl %s state dump" | python -c "import sys, json; print json.load(sys.stdin)[\'ports\'][\'%s\'][\'runner\'][\'selected\']"' % (
lag_name, po_intf)
wait_until(wait_timeout, delay, self.__check_shell_output,
self.duthost, command)
# Refresh lag facts
lag_facts = self.__get_lag_facts()
# Verify lag member is marked deselected for the shutdown port and all other lag member interfaces are marked selected
for po_intf in po_interfaces.keys():
if po_intf != intf:
assert lag_facts['lags'][lag_name]['po_stats']['ports'][
po_intf]['runner']['selected']
else:
assert not lag_facts['lags'][lag_name]['po_stats'][
'ports'][po_intf]['runner']['selected']
# Verify PortChannel's interface are marked down/up correctly if it should down/up
if po_flap == True:
assert lag_facts['lags'][lag_name]['po_intf_stat'] == 'Down'
else:
assert lag_facts['lags'][lag_name]['po_intf_stat'] == 'Up'
finally:
# Bring back port in case test error and left testbed in unknow stage
# Bring up neighbor interface
host.no_shutdown(neighbor_intf)
# Verify PortChannel interfaces are up correctly
for po_intf in po_interfaces.keys():
if po_intf != intf:
command = 'bash -c "teamdctl %s state dump" | python -c "import sys, json; print json.load(sys.stdin)[\'ports\'][\'%s\'][\'link\'][\'up\']"' % (
lag_name, po_intf)
wait_until(wait_timeout, delay, self.__check_shell_output,
self.duthost, command)
def test_thermal_control_psu_absence(testbed_devices, psu_controller, mocker_factory):
"""
@summary: Turn off/on PSUs, check thermal control is working as expect.
"""
dut = testbed_devices["dut"]
psu_num = get_psu_num(dut)
if psu_num < 2:
pytest.skip("At least 2 PSUs required for rest of the testing in this case")
logging.info("Create PSU controller for testing")
psu_ctrl = psu_controller
if psu_ctrl is None:
pytest.skip("No PSU controller for %s, skip rest of the testing in this case" % dut.hostname)
logging.info("To avoid DUT being shutdown, need to turn on PSUs that are not powered")
turn_all_psu_on(psu_ctrl)
logging.info("Initialize test results")
psu_test_results = {}
if not check_all_psu_on(dut, psu_test_results):
pytest.skip("Some PSU are still down, skip rest of the testing in this case")
with ThermalPolicyFileContext(dut, THERMAL_POLICY_VALID_FILE):
fan_mocker = mocker_factory(dut, 'FanStatusMocker')
if fan_mocker is None:
pytest.skip("No FanStatusMocker for %s, skip rest of the testing in this case" % dut.facts['asic_type'])
logging.info('Mock FAN status data...')
fan_mocker.mock_data() # make data random
restart_thermal_control_daemon(dut)
logging.info('Wait and check all FAN speed turn to 60%...')
wait_until(THERMAL_CONTROL_TEST_WAIT_TIME, THERMAL_CONTROL_TEST_CHECK_INTERVAL, fan_mocker.check_all_fan_speed,
60)
check_thermal_algorithm_status(dut, mocker_factory, False)
logging.info('Shutdown first PSU and check thermal control result...')
all_psu_status = psu_ctrl.get_psu_status()
psu = all_psu_status[0]
turn_off_psu_and_check_thermal_control(dut, psu_ctrl, psu, fan_mocker)
psu_test_results.clear()
if not check_all_psu_on(dut, psu_test_results):
pytest.skip("Some PSU are still down, skip rest of the testing in this case")
logging.info('Shutdown second PSU and check thermal control result...')
psu = all_psu_status[1]
turn_off_psu_and_check_thermal_control(dut, psu_ctrl, psu, fan_mocker)
psu_test_results.clear()
if not check_all_psu_on(dut, psu_test_results):
pytest.skip("Some PSU are still down, skip rest of the testing in this case")
logging.info('Wait and check all FAN speed turn to 65%...')
wait_until(THERMAL_CONTROL_TEST_WAIT_TIME, THERMAL_CONTROL_TEST_CHECK_INTERVAL, fan_mocker.check_all_fan_speed,
65)
def run_lag_fallback_test(self, lag_name):
logging.info("Start checking lag fall back for: %s" % lag_name)
lag_facts = self.__get_lag_facts()
intf, po_interfaces = self.__get_lag_intf_info(lag_facts, lag_name)
po_fallback = lag_facts['lags'][lag_name]['po_config']['runner'][
'fallback']
# Figure out remote VM and interface info for the lag member and run lag fallback test
peer_device = self.vm_neighbors[intf]['name']
neighbor_intf = self.vm_neighbors[intf]['port']
vm_host = self.nbrhosts[peer_device]['host']
wait_timeout = 120
delay = 5
try:
# Shut down neighbor interface
vm_host.shutdown(neighbor_intf)
wait_until(wait_timeout, delay, self.__check_intf_state, vm_host,
neighbor_intf, False)
# Refresh lag facts
lag_facts = self.__get_lag_facts()
# Get teamshow result
teamshow_result = self.duthost.shell('teamshow')
logging.debug("Teamshow result: %s" % teamshow_result)
# Verify lag members
# 1. All other lag should keep selected state
# 2. Shutdown port should keep selected state if fallback enabled
# 3. Shutdown port should marded as deselected if fallback disabled
# is marked deselected for the shutdown port and all other lag member interfaces are marked selected
for po_intf in po_interfaces.keys():
if po_intf != intf or po_fallback:
assert lag_facts['lags'][lag_name]['po_stats']['ports'][
po_intf]['runner']['selected']
else:
assert not lag_facts['lags'][lag_name]['po_stats'][
'ports'][po_intf]['runner']['selected']
# The portchannel should marked Up/Down correctly according to po fallback setting
if po_fallback:
assert lag_facts['lags'][lag_name]['po_intf_stat'] == 'Up'
else:
assert lag_facts['lags'][lag_name]['po_intf_stat'] == 'Down'
finally:
# Bring up neighbor interface
vm_host.no_shutdown(neighbor_intf)
wait_until(wait_timeout, delay, self.__check_intf_state, vm_host,
neighbor_intf, True)
def restart_service_and_check(localhost, dut, service, interfaces):
"""
Restart specified service and check platform status
"""
logging.info("Restart the %s service" % service)
dut.command("sudo systemctl restart %s" % service)
logging.info("Wait until all critical services are fully started")
check_critical_services(dut)
logging.info("Wait some time for all the transceivers to be detected")
assert wait_until(300, 20, check_interface_information, dut, interfaces), \
"Not all interface information are detected within 300 seconds"
logging.info("Check transceiver status")
check_transceiver_basic(dut, interfaces)
if dut.facts["asic_type"] in ["mellanox"]:
current_file_dir = os.path.dirname(os.path.realpath(__file__))
sub_folder_dir = os.path.join(current_file_dir, "mellanox")
if sub_folder_dir not in sys.path:
sys.path.append(sub_folder_dir)
from check_hw_mgmt_service import check_hw_management_service
from check_sysfs import check_sysfs
logging.info("Check the hw-management service")
check_hw_management_service(dut)
logging.info("Check sysfs")
check_sysfs(dut)
def test_fastboot(self, duthost, localhost, testbed):
duthost.command('sudo config save -y')
reboot(duthost, localhost, reboot_type='fast')
assert wait_until(300, 20, duthost.critical_services_fully_started
), "Not all critical services are fully started"
self.basic_check_after_reboot(duthost, localhost, testbed)
def test_standby_up(self, duthost, duthost2, ptfhost, testbed):
dut1_status = duthost.shell(
"mclagdctl -i {} dump state|grep 'keepalive'".format(
g_vars['mclag_domain_id']))['stdout'].split(":")[-1].strip()
dut2_status = duthost2.shell(
"mclagdctl -i {} dump state|grep 'keepalive'".format(
g_vars['mclag_domain_id']))['stdout'].split(":")[-1].strip()
assert dut1_status == dut2_status == "OK", "Mclag keepalive status should be OK on both peers after active reboot up"
# before send pkts, wait until standby mclag re-aggregate successfully due to router_mac change
assert wait_until(150, 10, check_teamd_status, duthost2, g_vars['dut1_router_mac']), \
"Standby teamd status should be up and sysid should be same as active's mac"
ptf_runner(
ptfhost,
"ptftests",
"mclag_test.MclagTest",
platform_dir="ptftests",
params={
"router_mac":
g_vars['dut1_router_mac'],
"router_mac_dut2":
g_vars['dut2_router_mac'],
"testbed_type":
testbed['topo'],
"switch_info":
"/tmp/mclag/mclag_switch_info_{}.txt".format(test_scenario),
"test_scenario":
test_scenario,
"ignore_ports": []
},
log_file="/tmp/mclag/log/mclag_{}_[{}]_[{}].log".format(
test_scenario, self.__class__.__name__,
sys._getframe().f_code.co_name))
def test_ntp(self, duthost):
force_ntp=" ntpd -gq"
duthost.service(name='ntp' , state='stopped')
logging.info("Ntp restart in mgmt vrf")
execute_dut_command(duthost, force_ntp)
duthost.service(name='ntp' , state='restarted')
assert wait_until(100, 10, self.check_ntp_status , duthost), "Ntp not started"
def test_ntp(duthost, setup_ntp):
""" verify the LLDP message on DUT """
duthost.service(name='ntp', state='stopped')
duthost.command("ntpd -gq")
duthost.service(name='ntp', state='restarted')
assert wait_until(120, 5, check_ntp_status, duthost), "Ntp not in sync"
def test_reload_configuration(testbed_devices, conn_graph_facts):
"""
@summary: This test case is to reload the configuration and check platform status
"""
ans_host = testbed_devices["dut"]
interfaces = conn_graph_facts["device_conn"]
asic_type = ans_host.facts["asic_type"]
logging.info("Reload configuration")
ans_host.command("sudo config reload -y")
logging.info("Wait until all critical services are fully started")
check_critical_services(ans_host)
logging.info("Wait some time for all the transceivers to be detected")
assert wait_until(300, 20, check_interface_information, ans_host, interfaces), \
"Not all transceivers are detected in 300 seconds"
logging.info("Check transceiver status")
check_transceiver_basic(ans_host, interfaces)
if asic_type in ["mellanox"]:
current_file_dir = os.path.dirname(os.path.realpath(__file__))
sub_folder_dir = os.path.join(current_file_dir, "mellanox")
if sub_folder_dir not in sys.path:
sys.path.append(sub_folder_dir)
from check_hw_mgmt_service import check_hw_management_service
from check_sysfs import check_sysfs
logging.info("Check the hw-management service")
check_hw_management_service(ans_host)
logging.info("Check sysfs")
check_sysfs(ans_host)
def setup_ntp(ptfhost, duthost, creds):
"""setup ntp client and server"""
if creds.get('proxy_env'):
# If testbed is behaind proxy then force ntpd inside ptf use local time
ptfhost.lineinfile(path="/etc/ntp.conf",
line="server 127.127.1.0 prefer")
# enable ntp server
ntp_en_res = ptfhost.service(name="ntp", state="started")
# setup ntp on dut to sync with ntp server
config_facts = duthost.config_facts(host=duthost.hostname,
source="running")['ansible_facts']
ntp_servers = config_facts.get('NTP_SERVER', {})
for ntp_server in ntp_servers:
duthost.command("config ntp del %s" % ntp_server)
ptfip = ptfhost.host.options['inventory_manager'].get_host(
ptfhost.hostname).vars['ansible_host']
duthost.command("config ntp add %s" % ptfip)
pytest_assert(wait_until(120, 5, check_ntp_status, ptfhost), \
"NTP server was not started in PTF container {}; NTP service start result {}".format(ptfhost.hostname, ntp_en_res))
yield
# stop ntp server
ptfhost.service(name="ntp", state="stopped")
# reset ntp client configuration
duthost.command("config ntp del %s" % ptfip)
for ntp_server in ntp_servers:
duthost.command("config ntp add %s" % ntp_server)
def check_interfaces_and_services(dut, interfaces, reboot_type=None):
"""
Perform a further check after reboot-cause, including transceiver status, interface status
@param localhost: The Localhost object.
@param dut: The AnsibleHost object of DUT.
@param interfaces: DUT's interfaces defined by minigraph
"""
logging.info("Wait until all critical services are fully started")
check_critical_services(dut)
if reboot_type is not None:
logging.info("Check reboot cause")
reboot_cause = reboot_ctrl_dict[reboot_type]["cause"]
assert wait_until(MAX_WAIT_TIME_FOR_REBOOT_CAUSE, 20, check_reboot_cause, dut, reboot_cause), \
"got reboot-cause failed after rebooted by %s" % reboot_cause
if reboot_ctrl_dict[reboot_type]["test_reboot_cause_only"]:
logging.info(
"Further checking skipped for %s test which intends to verify reboot-cause only"
% reboot_type)
return
logging.info("Wait %d seconds for all the transceivers to be detected" %
MAX_WAIT_TIME_FOR_INTERFACES)
assert wait_until(MAX_WAIT_TIME_FOR_INTERFACES, 20, check_interface_information, dut, interfaces), \
"Not all transceivers are detected or interfaces are up in %d seconds" % MAX_WAIT_TIME_FOR_INTERFACES
logging.info("Check transceiver status")
check_transceiver_basic(dut, interfaces)
logging.info("Check pmon daemon status")
assert check_pmon_daemon_status(dut), "Not all pmon daemons running."
if dut.facts["asic_type"] in ["mellanox"]:
current_file_dir = os.path.dirname(os.path.realpath(__file__))
sub_folder_dir = os.path.join(current_file_dir, "mellanox")
if sub_folder_dir not in sys.path:
sys.path.append(sub_folder_dir)
from check_hw_mgmt_service import check_hw_management_service
from check_sysfs import check_sysfs
logging.info("Check the hw-management service")
check_hw_management_service(dut)
logging.info("Check sysfs")
check_sysfs(dut)
def test_reboot(self, localhost, testbed_devices, testbed):
duthost = testbed_devices["dut"]
duthost.command('sudo config save -y')
reboot(duthost, localhost)
assert wait_until(300, 20, duthost.critical_services_fully_started
), "Not all critical services are fully started"
self.basic_check_after_reboot(duthost, localhost, testbed_devices,
testbed)
def reboot_and_check(localhost, dut, interfaces, reboot_type="cold"):
"""
Perform the specified type of reboot and check platform status.
"""
logging.info("Run %s reboot on DUT" % reboot_type)
if reboot_type == "cold":
reboot_cmd = "reboot"
reboot_timeout = 300
elif reboot_type == "fast":
reboot_cmd = "fast-reboot"
reboot_timeout = 180
elif reboot_type == "warm":
reboot_cmd = "warm-reboot"
reboot_timeout = 180
else:
assert False, "Reboot type %s is not supported" % reboot_type
process, queue = dut.command(reboot_cmd, module_async=True)
logging.info("Wait for DUT to go down")
res = localhost.wait_for(host=dut.hostname, port=22, state="stopped", delay=10, timeout=120,
module_ignore_errors=True)
if "failed" in res:
if process.is_alive():
logging.error("Command '%s' is not completed" % reboot_cmd)
process.terminate()
logging.error("reboot result %s" % str(queue.get()))
assert False, "DUT did not go down"
logging.info("Wait for DUT to come back")
localhost.wait_for(host=dut.hostname, port=22, state="started", delay=10, timeout=reboot_timeout)
logging.info("Wait until all critical services are fully started")
check_critical_services(dut)
logging.info("Wait some time for all the transceivers to be detected")
assert wait_until(300, 20, all_transceivers_detected, dut, interfaces), \
"Not all transceivers are detected in 300 seconds"
logging.info("Check interface status")
check_interface_status(dut, interfaces)
logging.info("Check transceiver status")
check_transceiver_basic(dut, interfaces)
if dut.facts["asic_type"] in ["mellanox"]:
current_file_dir = os.path.dirname(os.path.realpath(__file__))
sub_folder_dir = os.path.join(current_file_dir, "mellanox")
if sub_folder_dir not in sys.path:
sys.path.append(sub_folder_dir)
from check_hw_mgmt_service import check_hw_management_service
from check_sysfs import check_sysfs
logging.info("Check the hw-management service")
check_hw_management_service(dut)
logging.info("Check sysfs")
check_sysfs(dut)
def check_critical_services(dut):
"""
@summary: Use systemctl to check whether all the critical services have expected status. ActiveState of all
services must be "active". SubState of all services must be "running".
@param dut: The AnsibleHost object of DUT. For interacting with DUT.
"""
logging.info("Wait until all critical services are fully started")
assert wait_until(300, 20, _all_critical_services_fully_started,
dut), "Not all critical services are fully started"
def verify_drop_counters(duthost, dut_iface, get_cnt_cli_cmd, column_key):
""" Verify drop counter incremented on specific interface """
get_drops = lambda: int(get_pkt_drops(duthost, get_cnt_cli_cmd)[dut_iface][column_key].replace(",", ""))
check_drops_on_dut = lambda: PKT_NUMBER == get_drops()
if not wait_until(5, 1, check_drops_on_dut):
fail_msg = "'{}' drop counter was not incremented on iface {}. DUT {} == {}; Sent == {}".format(
column_key, dut_iface, column_key, get_drops(), PKT_NUMBER
)
pytest.fail(fail_msg)
def reboot(duthost,
localhost,
delay=10,
timeout=180,
wait=120,
basic_check=True):
"""
cold reboots DUT
:param duthost: DUT host object
:param localhost: local host object
:param delay: delay between ssh availability checks
:param timeout: timeout for waiting ssh port state change
:param wait: time to wait for DUT to initialize
:param basic_check: check duthost.critical_services_fully_started after DUT initialize
:return:
"""
dut_ip = duthost.host.options['inventory_manager'].get_host(
duthost.hostname).address
duthost.shell("nohup reboot &")
logging.info('waiting for ssh to drop')
res = localhost.wait_for(host=dut_ip,
port=SONIC_SSH_PORT,
state='absent',
search_regex=SONIC_SSH_REGEX,
delay=delay,
timeout=timeout)
if res.is_failed:
raise Exception('DUT did not shutdown')
# TODO: add serial output during reboot for better debuggability
# This feature requires serial information to be present in
# testbed information
logging.info('waiting for ssh to startup')
res = localhost.wait_for(host=dut_ip,
port=SONIC_SSH_PORT,
state='started',
search_regex=SONIC_SSH_REGEX,
delay=delay,
timeout=timeout)
if res.is_failed:
raise Exception('DUT did not startup')
logging.info('ssh has started up')
logging.info('waiting for switch to initialize')
time.sleep(wait)
if basic_check:
assert wait_until(timeout, 10, duthost.critical_services_fully_started), \
"All critical services should fully started!{}".format(duthost.CRITICAL_SERVICES)
def setup_bgp_graceful_restart(duthost, nbrhosts):
config_facts = duthost.config_facts(host=duthost.hostname,
source="running")['ansible_facts']
bgp_neighbors = config_facts.get('BGP_NEIGHBOR', {})
for k, nbr in nbrhosts.items():
logger.info("enable graceful restart on neighbor {}".format(k))
logger.info("bgp asn {}".format(nbr['conf']['bgp']['asn']))
res = nbr['host'].eos_config(lines=["graceful-restart restart-time 300"], \
parents=["router bgp {}".format(nbr['conf']['bgp']['asn'])])
logger.info("abc {}".format(res))
res = nbr['host'].eos_config(lines=["graceful-restart"], \
parents=["router bgp {}".format(nbr['conf']['bgp']['asn']), "address-family ipv4"])
logger.info("abc {}".format(res))
res = nbr['host'].eos_config(lines=["graceful-restart"], \
parents=["router bgp {}".format(nbr['conf']['bgp']['asn']), "address-family ipv6"])
logger.info("abc {}".format(res))
# change graceful restart option will clear the bgp session.
# so, let's wait for all bgp sessions to be up
logger.info("bgp neighbors: {}".format(bgp_neighbors.keys()))
if not wait_until(300, 10, duthost.check_bgp_session_state,
bgp_neighbors.keys()):
pytest.fail(
"not all bgp sessions are up after enable graceful restart")
yield
for k, nbr in nbrhosts.items():
# start bgpd if not started
nbr['host'].start_bgpd()
logger.info("disable graceful restart on neighbor {}".format(k))
nbr['host'].eos_config(lines=["no graceful-restart"], \
parents=["router bgp {}".format(nbr['conf']['bgp']['asn']), "address-family ipv4"])
nbr['host'].eos_config(lines=["no graceful-restart"], \
parents=["router bgp {}".format(nbr['conf']['bgp']['asn']), "address-family ipv6"])
if not wait_until(300, 10, duthost.check_bgp_session_state,
bgp_neighbors.keys()):
pytest.fail(
"not all bgp sessions are up after disable graceful restart")
def test_techsupport(request, config, duthost, testbed):
"""
test the "show techsupport" command in a loop
:param config: fixture to configure additional setups_list on dut.
:param duthost: DUT host
:param testbed: testbed
"""
loop_range = request.config.getoption("--loop_num") or DEFAULT_LOOP_RANGE
loop_delay = request.config.getoption("--loop_delay") or DEFAULT_LOOP_DELAY
since = request.config.getoption("--logs_since") or str(randint(1, 23)) + " minute ago"
logger.debug("Loop_range is {} and loop_delay is {}".format(loop_range, loop_delay))
for i in range(loop_range):
logger.debug("Running show techsupport ... ")
wait_until(300, 20, execute_command, duthost, str(since))
tar_file = [j for j in pytest.tar_stdout.split('\n') if j != ''][-1]
stdout = duthost.command("rm -rf {}".format(tar_file))
logger.debug("Sleeping for {} seconds".format(loop_delay))
time.sleep(loop_delay)
def testFastreboot(self, sflowbase_config, duthost, localhost, partial_ptf_runner, ptfhost):
config_sflow(duthost,sflow_status='enable')
verify_show_sflow(duthost,status='up',collector=['collector0','collector1'])
duthost.command('sudo config save -y')
reboot(duthost, localhost,reboot_type='fast')
assert wait_until(300, 20, duthost.critical_services_fully_started), "Not all critical services are fully started"
verify_show_sflow(duthost,status='up',collector=['collector0','collector1'])
for intf in var['sflow_ports']:
var['sflow_ports'][intf]['ifindex'] = get_ifindex(duthost,intf)
verify_sflow_interfaces(duthost,intf,'up',512)
var['portmap'] = json.dumps(var['sflow_ports'])
ptfhost.copy(content=var['portmap'],dest="/tmp/sflow_ports.json")
partial_ptf_runner(
enabled_sflow_interfaces=var['sflow_ports'].keys(),
active_collectors="['collector0','collector1']" )
def check_critical_services(dut):
"""
@summary: Use systemctl to check whether all the critical services have expected status. ActiveState of all
services must be "active". SubState of all services must be "running".
@param dut: The AnsibleHost object of DUT. For interacting with DUT.
"""
logging.info("Wait until all critical services are fully started")
assert wait_until(300, 20, dut.critical_services_fully_started
), "Not all critical services are fully started"
logging.info("Check critical service status")
for service in dut.CRITICAL_SERVICES:
status = dut.get_service_props(service)
assert status["ActiveState"] == "active", \
"ActiveState of %s is %s, expected: active" % (service, status["ActiveState"])
assert status["SubState"] == "running", \
"SubState of %s is %s, expected: active" % (service, status["SubState"])
def testRebootSflowDisable(self, sflowbase_config, duthost,
testbed_devices, localhost, partial_ptf_runner,
ptfhost):
config_sflow(duthost, sflow_status='disable')
verify_show_sflow(duthost, status='down')
partial_ptf_runner(enabled_sflow_interfaces=var['sflow_ports'].keys(),
active_collectors="[]")
duthost.command('sudo config save -y')
reboot(duthost, localhost)
assert wait_until(300, 20, duthost.critical_services_fully_started
), "Not all critical services are fully started"
verify_show_sflow(duthost, status='down')
for intf in var['sflow_ports']:
var['sflow_ports'][intf]['ifindex'] = get_ifindex(duthost, intf)
var['portmap'] = json.dumps(var['sflow_ports'])
ptfhost.copy(content=var['portmap'], dest="/tmp/sflow_ports.json")
partial_ptf_runner(enabled_sflow_interfaces=var['sflow_ports'].keys(),
active_collectors="[]")
def testRebootSflowEnable(self, sflowbase_config, duthost, testbed_devices,
localhost, partial_ptf_runner, ptfhost):
duthost = testbed_devices["dut"]
duthost.command("config sflow polling-interval 80")
verify_show_sflow(duthost, status='up', polling_int=80)
duthost.command('sudo config save -y')
reboot(duthost, localhost)
assert wait_until(300, 20, duthost.critical_services_fully_started
), "Not all critical services are fully started"
verify_show_sflow(duthost,
status='up',
collector=['collector0', 'collector1'],
polling_int=80)
for intf in var['sflow_ports']:
var['sflow_ports'][intf]['ifindex'] = get_ifindex(duthost, intf)
verify_sflow_interfaces(duthost, intf, 'up', 512)
var['portmap'] = json.dumps(var['sflow_ports'])
ptfhost.copy(content=var['portmap'], dest="/tmp/sflow_ports.json")
partial_ptf_runner(enabled_sflow_interfaces=var['sflow_ports'].keys(),
active_collectors="['collector0','collector1']")
# Test Polling
partial_ptf_runner(polling_int=80,
active_collectors="['collector0','collector1']")
def wait_until_fan_speed_set_to_default(dut, timeout=300, interval=10):
wait_until(timeout, interval, fan_speed_set_to_default, dut)
def test_bgp_gr_helper_routes_perserved(duthost, nbrhosts,
setup_bgp_graceful_restart):
"""
Verify that DUT routes are preserved when peer performed graceful restart
"""
config_facts = duthost.config_facts(host=duthost.hostname,
source="running")['ansible_facts']
bgp_neighbors = config_facts.get('BGP_NEIGHBOR', {})
po = config_facts.get('PORTCHANNEL', {})
dev_nbr = config_facts.get('DEVICE_NEIGHBOR', {})
rtinfo_v4 = duthost.get_ip_route_info(ipaddress.ip_address(u'0.0.0.0'))
if len(rtinfo_v4['nexthops']) == 0:
pytest.skip("there is no next hop for v4 default route")
rtinfo_v6 = duthost.get_ip_route_info(ipaddress.ip_address(u'::'))
if len(rtinfo_v6['nexthops']) == 0:
pytest.skip("there is no next hop for v6 default route")
ifnames_v4 = [nh[1] for nh in rtinfo_v4['nexthops']]
ifnames_v6 = [nh[1] for nh in rtinfo_v6['nexthops']]
ifnames_common = [ifname for ifname in ifnames_v4 if ifname in ifnames_v6]
ifname = ifnames_common[0]
# get neighbor device connected ports
nbr_ports = []
if ifname.startswith("PortChannel"):
for member in po[ifname]['members']:
nbr_ports.append(dev_nbr[member]['port'])
else:
pytest.skip(
"Do not support peer device not connected via port channel")
logger.info("neighbor device connected ports {}".format(nbr_ports))
# get nexthop ip
for nh in rtinfo_v4['nexthops']:
if nh[1] == ifname:
bgp_nbr_ipv4 = nh[0]
for nh in rtinfo_v6['nexthops']:
if nh[1] == ifname:
bgp_nbr_ipv6 = nh[0]
# get the bgp neighbor
bgp_nbr = bgp_neighbors[str(bgp_nbr_ipv4)]
nbr_hostname = bgp_nbr['name']
nbrhost = nbrhosts[nbr_hostname]['host']
exabgp_sessions = ['exabgp_v4', 'exabgp_v6']
pytest_assert(nbrhost.check_bgp_session_state([], exabgp_sessions), \
"exabgp sessions {} are not up before graceful restart".format(exabgp_sessions))
# shutdown Rib agent, starting gr process
logger.info("shutdown rib process on neighbor {}".format(nbr_hostname))
nbrhost.kill_bgpd()
# wait till DUT enter NSF state
pytest_assert(wait_until(60, 5, duthost.check_bgp_session_nsf, bgp_nbr_ipv4), \
"neighbor {} does not enter NSF state".format(bgp_nbr_ipv4))
pytest_assert(wait_until(60, 5, duthost.check_bgp_session_nsf, bgp_nbr_ipv6), \
"neighbor {} does not enter NSF state".format(bgp_nbr_ipv6))
# confirm ip route still there
rtinfo_v4 = duthost.get_ip_route_info(ipaddress.ip_address(u'0.0.0.0'))
pytest_assert(ipaddress.ip_address(bgp_nbr_ipv4) in [ nh[0] for nh in rtinfo_v4['nexthops'] ], \
"cannot find nexthop {} in the new default route nexthops. {}".format(bgp_nbr_ipv4, rtinfo_v4))
rtinfo_v6 = duthost.get_ip_route_info(ipaddress.ip_address(u'::'))
pytest_assert(ipaddress.ip_address(bgp_nbr_ipv6) in [ nh[0] for nh in rtinfo_v6['nexthops'] ], \
"cannot find nexthop {} in the new default route nexthops. {}".format(bgp_nbr_ipv6, rtinfo_v6))
# shutdown the connected ports from nbr
for nbr_port in nbr_ports:
nbrhost.shutdown(nbr_port)
try:
# start Rib agent
logger.info("startup rib process on neighbor {}".format(nbr_hostname))
nbrhost.start_bgpd()
# wait for exabgp sessions to establish
pytest_assert(wait_until(300, 10, nbrhost.check_bgp_session_state, [], exabgp_sessions), \
"exabgp sessions {} are not coming back".format(exabgp_sessions))
except:
raise
finally:
# unshut the connected ports from nbr
for nbr_port in nbr_ports:
nbrhost.no_shutdown(nbr_port)
# confirm bgp session up
graceful_restarted_bgp_sessions = [str(bgp_nbr_ipv4), str(bgp_nbr_ipv6)]
pytest_assert(wait_until(300, 10, duthost.check_bgp_session_state, graceful_restarted_bgp_sessions), \
"graceful restarted bgp sessions {} are not coming back".format(graceful_restarted_bgp_sessions))
def reboot_and_check(localhost,
dut,
interfaces,
reboot_type=REBOOT_TYPE_COLD,
reboot_helper=None,
reboot_kwargs=None):
"""
Perform the specified type of reboot and check platform status.
@param localhost: The Localhost object.
@param dut: The AnsibleHost object of DUT.
@param interfaces: DUT's interfaces defined by minigraph
@param reboot_type: The reboot type, pre-defined const that has name convention of REBOOT_TYPE_XXX.
@param reboot_helper: The helper function used only by power off reboot
@param reboot_kwargs: The argument used by reboot_helper
"""
logging.info("Run %s reboot on DUT" % reboot_type)
assert reboot_type in reboot_ctrl_dict.keys(
), "Unknown reboot type %s" % reboot_type
reboot_timeout = reboot_ctrl_dict[reboot_type]["timeout"]
reboot_cause = reboot_ctrl_dict[reboot_type]["cause"]
dut_datetime = datetime.strptime(
dut.command('date -u +"%Y-%m-%d %H:%M:%S"')["stdout"],
"%Y-%m-%d %H:%M:%S")
if reboot_type == REBOOT_TYPE_POWEROFF:
assert reboot_helper is not None, "A reboot function must be provided for power off reboot"
reboot_helper(reboot_kwargs)
localhost.wait_for(host=dut.hostname,
port=22,
state="stopped",
delay=10,
timeout=120)
else:
reboot_cmd = reboot_ctrl_dict[reboot_type]["command"]
reboot_task, reboot_res = dut.command(reboot_cmd,
module_ignore_errors=True,
module_async=True)
logging.info("Wait for DUT to go down")
res = localhost.wait_for(host=dut.hostname,
port=22,
state="stopped",
timeout=180,
module_ignore_errors=True)
if "failed" in res:
try:
logging.error(
"Wait for switch down failed, try to kill any possible stuck reboot task"
)
pid = dut.command("pgrep -f '%s'" % reboot_cmd)["stdout"]
dut.command("kill -9 %s" % pid)
reboot_task.terminate()
logging.error("Result of command '%s': " +
str(reboot_res.get(timeout=0)))
except Exception as e:
logging.error(
"Exception raised while cleanup reboot task and get result: "
+ repr(e))
logging.info("Wait for DUT to come back")
localhost.wait_for(host=dut.hostname,
port=22,
state="started",
delay=10,
timeout=reboot_timeout)
logging.info("Check the uptime to verify whether reboot was performed")
dut_uptime = datetime.strptime(
dut.command("uptime -s")["stdout"], "%Y-%m-%d %H:%M:%S")
assert float(dut_uptime.strftime("%s")) - float(
dut_datetime.strftime("%s")) > 10, "Device did not reboot"
logging.info("Wait until all critical services are fully started")
check_critical_services(dut)
logging.info("Check reboot cause")
check_reboot_cause(dut, reboot_cause)
if reboot_ctrl_dict[reboot_type]["test_reboot_cause_only"]:
logging.info(
"Further checking skipped for %s test which intends to verify reboot-cause only"
.format(reboot_type))
return
logging.info("Wait some time for all the transceivers to be detected")
assert wait_until(300, 20, check_interface_information, dut, interfaces), \
"Not all transceivers are detected or interfaces are up in 300 seconds"
logging.info("Check transceiver status")
check_transceiver_basic(dut, interfaces)
logging.info("Check pmon daemon status")
assert check_pmon_daemon_status(dut), "Not all pmon daemons running."
if dut.facts["asic_type"] in ["mellanox"]:
current_file_dir = os.path.dirname(os.path.realpath(__file__))
sub_folder_dir = os.path.join(current_file_dir, "mellanox")
if sub_folder_dir not in sys.path:
sys.path.append(sub_folder_dir)
from check_hw_mgmt_service import check_hw_management_service
from check_sysfs import check_sysfs
logging.info("Check the hw-management service")
check_hw_management_service(dut)
logging.info("Check sysfs")
check_sysfs(dut)
