# Create a separate clock domain for the CPUs. In case of Trace CPUs this clock
# is actually used only by the caches connected to the CPU.
system.cpu_clk_domain = SrcClockDomain(clock = options.cpu_clock,
voltage_domain =
system.cpu_voltage_domain)
# All cpus belong to a common cpu_clk_domain, therefore running at a common
# frequency.
for cpu in system.cpu:
cpu.clk_domain = system.cpu_clk_domain
# BaseCPU no longer has default values for the BaseCPU.isa
# createThreads() is needed to fill in the cpu.isa
for cpu in system.cpu:
cpu.createThreads()
# Assign input trace files to the Trace CPU
system.cpu.instTraceFile=options.inst_trace_file
system.cpu.dataTraceFile=options.data_trace_file
# Configure the classic memory system options
MemClass = Simulation.setMemClass(options)
system.membus = SystemXBar()
system.system_port = system.membus.slave
CacheConfig.config_cache(options, system)
MemConfig.config_mem(options, system)
root = Root(full_system = False, system = system)
Simulation.run(options, root, system, FutureClass)
ruby_port = system.ruby._cpu_ports[i]
# Create the interrupt controller and connect its ports to Ruby
# Note that the interrupt controller is always present but only
# in x86 does it have message ports that need to be connected
system.cpu[i].createInterruptController()
# Connect the cpu's cache ports to Ruby
system.cpu[i].icache_port = ruby_port.slave
system.cpu[i].dcache_port = ruby_port.slave
if buildEnv['TARGET_ISA'] == 'x86':
system.cpu[i].interrupts[0].pio = ruby_port.master
system.cpu[i].interrupts[0].int_master = ruby_port.slave
system.cpu[i].interrupts[0].int_slave = ruby_port.master
system.cpu[i].itb.walker.port = ruby_port.slave
system.cpu[i].dtb.walker.port = ruby_port.slave
else:
MemClass = Simulation.setMemClass(options)
system.membus = SystemXBar()
system.system_port = system.membus.slave
CacheConfig.config_cache(options, system)
MemConfig.config_mem(options, system)
config_filesystem(system, options)
if options.wait_gdb:
for cpu in system.cpu:
cpu.wait_for_remote_gdb = True
root = Root(full_system=False, system=system)
Simulation.run(options, root, system, FutureClass)
def build_test_system(np):
cmdline = cmd_line_template()
if buildEnv['TARGET_ISA'] == "alpha":
test_sys = makeLinuxAlphaSystem(test_mem_mode, bm[0], options.ruby,
cmdline=cmdline)
elif buildEnv['TARGET_ISA'] == "mips":
test_sys = makeLinuxMipsSystem(test_mem_mode, bm[0], cmdline=cmdline)
elif buildEnv['TARGET_ISA'] == "sparc":
test_sys = makeSparcSystem(test_mem_mode, bm[0], cmdline=cmdline)
elif buildEnv['TARGET_ISA'] == "x86":
test_sys = makeLinuxX86System(test_mem_mode, np, bm[0], options.ruby,
cmdline=cmdline)
elif buildEnv['TARGET_ISA'] == "arm":
test_sys = makeArmSystem(test_mem_mode, options.machine_type, np,
bm[0], options.dtb_filename,
bare_metal=options.bare_metal,
cmdline=cmdline,
external_memory=
options.external_memory_system,
ruby=options.ruby,
security=options.enable_security_extensions)
if options.enable_context_switch_stats_dump:
test_sys.enable_context_switch_stats_dump = True
else:
fatal("Incapable of building %s full system!", buildEnv['TARGET_ISA'])
# Set the cache line size for the entire system
test_sys.cache_line_size = options.cacheline_size
# Create a top-level voltage domain
test_sys.voltage_domain = VoltageDomain(voltage = options.sys_voltage)
# Create a source clock for the system and set the clock period
test_sys.clk_domain = SrcClockDomain(clock = options.sys_clock,
voltage_domain = test_sys.voltage_domain)
# Create a CPU voltage domain
test_sys.cpu_voltage_domain = VoltageDomain()
# Create a source clock for the CPUs and set the clock period
test_sys.cpu_clk_domain = SrcClockDomain(clock = options.cpu_clock,
voltage_domain =
test_sys.cpu_voltage_domain)
if options.kernel is not None:
test_sys.kernel = binary(options.kernel)
else:
print("Error: a kernel must be provided to run in full system mode")
sys.exit(1)
if options.script is not None:
test_sys.readfile = options.script
if options.lpae:
test_sys.have_lpae = True
if options.virtualisation:
test_sys.have_virtualization = True
test_sys.init_param = options.init_param
# For now, assign all the CPUs to the same clock domain
test_sys.cpu = [TestCPUClass(clk_domain=test_sys.cpu_clk_domain, cpu_id=i)
for i in range(np)]
if CpuConfig.is_kvm_cpu(TestCPUClass) or CpuConfig.is_kvm_cpu(FutureClass):
test_sys.kvm_vm = KvmVM()
if options.ruby:
bootmem = getattr(test_sys, 'bootmem', None)
Ruby.create_system(options, True, test_sys, test_sys.iobus,
test_sys._dma_ports, bootmem)
# Create a seperate clock domain for Ruby
test_sys.ruby.clk_domain = SrcClockDomain(clock = options.ruby_clock,
voltage_domain = test_sys.voltage_domain)
# Connect the ruby io port to the PIO bus,
# assuming that there is just one such port.
test_sys.iobus.master = test_sys.ruby._io_port.slave
for (i, cpu) in enumerate(test_sys.cpu):
#
# Tie the cpu ports to the correct ruby system ports
#
cpu.clk_domain = test_sys.cpu_clk_domain
cpu.createThreads()
cpu.createInterruptController()
cpu.icache_port = test_sys.ruby._cpu_ports[i].slave
cpu.dcache_port = test_sys.ruby._cpu_ports[i].slave
if buildEnv['TARGET_ISA'] in ("x86", "arm"):
cpu.itb.walker.port = test_sys.ruby._cpu_ports[i].slave
cpu.dtb.walker.port = test_sys.ruby._cpu_ports[i].slave
if buildEnv['TARGET_ISA'] in "x86":
cpu.interrupts[0].pio = test_sys.ruby._cpu_ports[i].master
cpu.interrupts[0].int_master = test_sys.ruby._cpu_ports[i].slave
cpu.interrupts[0].int_slave = test_sys.ruby._cpu_ports[i].master
else:
if options.caches or options.l2cache:
# By default the IOCache runs at the system clock
test_sys.iocache = IOCache(addr_ranges = test_sys.mem_ranges)
test_sys.iocache.cpu_side = test_sys.iobus.master
test_sys.iocache.mem_side = test_sys.membus.slave
elif not options.external_memory_system:
test_sys.iobridge = Bridge(delay='50ns', ranges = test_sys.mem_ranges)
test_sys.iobridge.slave = test_sys.iobus.master
test_sys.iobridge.master = test_sys.membus.slave
# Sanity check
if options.simpoint_profile:
if not CpuConfig.is_noncaching_cpu(TestCPUClass):
fatal("SimPoint generation should be done with atomic cpu")
if np > 1:
fatal("SimPoint generation not supported with more than one CPUs")
for i in range(np):
if options.simpoint_profile:
test_sys.cpu[i].addSimPointProbe(options.simpoint_interval)
if options.checker:
test_sys.cpu[i].addCheckerCpu()
if options.bp_type:
bpClass = BPConfig.get(options.bp_type)
test_sys.cpu[i].branchPred = bpClass()
if options.indirect_bp_type:
IndirectBPClass = \
BPConfig.get_indirect(options.indirect_bp_type)
test_sys.cpu[i].branchPred.indirectBranchPred = \
IndirectBPClass()
test_sys.cpu[i].createThreads()
# If elastic tracing is enabled when not restoring from checkpoint and
# when not fast forwarding using the atomic cpu, then check that the
# TestCPUClass is DerivO3CPU or inherits from DerivO3CPU. If the check
# passes then attach the elastic trace probe.
# If restoring from checkpoint or fast forwarding, the code that does this for
# FutureCPUClass is in the Simulation module. If the check passes then the
# elastic trace probe is attached to the switch CPUs.
if options.elastic_trace_en and options.checkpoint_restore == None and \
not options.fast_forward:
CpuConfig.config_etrace(TestCPUClass, test_sys.cpu, options)
CacheConfig.config_cache(options, test_sys)
MemConfig.config_mem(options, test_sys)
return test_sys
# in x86 does it have message ports that need to be connected
system.cpu[i].createInterruptController()
# Connect the cpu's cache ports to Ruby
system.cpu[i].icache_port = ruby_port.slave
system.cpu[i].dcache_port = ruby_port.slave
if buildEnv['TARGET_ISA'] == 'x86':
system.cpu[i].interrupts[0].pio = ruby_port.master
system.cpu[i].interrupts[0].int_master = ruby_port.slave
system.cpu[i].interrupts[0].int_slave = ruby_port.master
system.cpu[i].itb.walker.port = ruby_port.slave
system.cpu[i].dtb.walker.port = ruby_port.slave
else:
print("we are doing this building here")
MemClass = Simulation.setMemClass(options)
system.membus = SystemXBar()
system.system_port = system.membus.slave
CacheConfig.config_cache(options, system, encoder)
MemConfig.config_mem(options, system)
root = Root(full_system=False, system=system)
#root.encrypter = EncodeObject()
print('--------------')
print(FutureClass)
print(options)
print(root)
print(system)
print(options.test_Flag)
print('-----------')
Simulation.run(options, root, system, FutureClass)
def build_test_system(np, simplessd):
cmdline = cmd_line_template()
if buildEnv['TARGET_ISA'] == "alpha":
test_sys = makeLinuxAlphaSystem(test_mem_mode, bm[0], options.ruby,
cmdline=cmdline)
elif buildEnv['TARGET_ISA'] == "mips":
test_sys = makeLinuxMipsSystem(test_mem_mode, bm[0], cmdline=cmdline)
elif buildEnv['TARGET_ISA'] == "sparc":
test_sys = makeSparcSystem(test_mem_mode, bm[0], cmdline=cmdline)
elif buildEnv['TARGET_ISA'] == "x86":
test_sys = makeLinuxX86System(test_mem_mode, simplessd,
options.num_cpus, bm[0], options.ruby,
cmdline=cmdline)
elif buildEnv['TARGET_ISA'] == "arm":
test_sys = makeArmSystem(test_mem_mode, options.machine_type,
simplessd, options.num_cpus, bm[0],
options.dtb_filename,
bare_metal=options.bare_metal,
cmdline=cmdline,
ignore_dtb=options.generate_dtb,
external_memory=
options.external_memory_system,
ruby=options.ruby,
security=options.enable_security_extensions)
if options.enable_context_switch_stats_dump:
test_sys.enable_context_switch_stats_dump = True
else:
fatal("Incapable of building %s full system!", buildEnv['TARGET_ISA'])
# Set the cache line size for the entire system
test_sys.cache_line_size = options.cacheline_size
# Create a top-level voltage domain
test_sys.voltage_domain = VoltageDomain(voltage = options.sys_voltage)
# Create a source clock for the system and set the clock period
test_sys.clk_domain = SrcClockDomain(clock = options.sys_clock,
voltage_domain = test_sys.voltage_domain)
# Create a CPU voltage domain
test_sys.cpu_voltage_domain = VoltageDomain()
# Create a source clock for the CPUs and set the clock period
test_sys.cpu_clk_domain = SrcClockDomain(clock = options.cpu_clock,
voltage_domain =
test_sys.cpu_voltage_domain)
if options.kernel is not None:
test_sys.kernel = binary(options.kernel)
if options.script is not None:
test_sys.readfile = options.script
if options.lpae:
test_sys.have_lpae = True
if options.virtualisation:
test_sys.have_virtualization = True
test_sys.init_param = options.init_param
# For now, assign all the CPUs to the same clock domain
test_sys.cpu = [TestCPUClass(clk_domain=test_sys.cpu_clk_domain, cpu_id=i)
for i in xrange(np)]
if is_kvm_cpu(TestCPUClass) or is_kvm_cpu(FutureClass):
test_sys.kvm_vm = KvmVM()
if options.ruby:
Ruby.create_system(options, True, test_sys, test_sys.iobus,
test_sys._dma_ports)
# Create a seperate clock domain for Ruby
test_sys.ruby.clk_domain = SrcClockDomain(clock = options.ruby_clock,
voltage_domain = test_sys.voltage_domain)
# Connect the ruby io port to the PIO bus,
# assuming that there is just one such port.
test_sys.iobus.master = test_sys.ruby._io_port.slave
for (i, cpu) in enumerate(test_sys.cpu):
#
# Tie the cpu ports to the correct ruby system ports
#
cpu.clk_domain = test_sys.cpu_clk_domain
cpu.createThreads()
cpu.createInterruptController()
cpu.icache_port = test_sys.ruby._cpu_ports[i].slave
cpu.dcache_port = test_sys.ruby._cpu_ports[i].slave
if buildEnv['TARGET_ISA'] in ("x86", "arm"):
cpu.itb.walker.port = test_sys.ruby._cpu_ports[i].slave
cpu.dtb.walker.port = test_sys.ruby._cpu_ports[i].slave
if buildEnv['TARGET_ISA'] in "x86":
cpu.interrupts[0].pio = test_sys.ruby._cpu_ports[i].master
cpu.interrupts[0].int_master = test_sys.ruby._cpu_ports[i].slave
cpu.interrupts[0].int_slave = test_sys.ruby._cpu_ports[i].master
else:
gicv2m_range = AddrRange(0x2c1c0000, 0x2c1d0000 - 1)
if options.caches or options.l2cache:
# By default the IOCache runs at the system clock
test_sys.iocache = IOCache(addr_ranges = test_sys.mem_ranges)
test_sys.iocache.cpu_side = test_sys.iobus.master
test_sys.iocache.mem_side = test_sys.membus.slave
if buildEnv['TARGET_ISA'] == "arm":
if options.machine_type == "VExpress_GEM5_V1":
test_sys.iobridge = Bridge(delay='50ns',
ranges=[gicv2m_range])
test_sys.iobridge.slave = test_sys.iobus.master
test_sys.iobridge.master = test_sys.membus.slave
elif not options.external_memory_system:
mem_ranges = list(test_sys.mem_ranges) # Copy list not reference
# Bypass MSI/MSI-X
if buildEnv['TARGET_ISA'] == "arm":
if options.machine_type == "VExpress_GEM5_V1":
mem_ranges.append(gicv2m_range)
test_sys.iobridge = Bridge(delay='50ns', ranges=mem_ranges)
test_sys.iobridge.slave = test_sys.iobus.master
test_sys.iobridge.master = test_sys.membus.slave
# Sanity check
if options.fastmem:
if TestCPUClass != AtomicSimpleCPU:
fatal("Fastmem can only be used with atomic CPU!")
if (options.caches or options.l2cache):
fatal("You cannot use fastmem in combination with caches!")
if options.simpoint_profile:
if not options.fastmem:
# Atomic CPU checked with fastmem option already
fatal("SimPoint generation should be done with atomic cpu and fastmem")
if np > 1:
fatal("SimPoint generation not supported with more than one CPUs")
for i in xrange(np):
if options.fastmem:
test_sys.cpu[i].fastmem = True
if options.simpoint_profile:
test_sys.cpu[i].addSimPointProbe(options.simpoint_interval)
if options.checker:
test_sys.cpu[i].addCheckerCpu()
test_sys.cpu[i].createThreads()
# If elastic tracing is enabled when not restoring from checkpoint and
# when not fast forwarding using the atomic cpu, then check that the
# TestCPUClass is DerivO3CPU or inherits from DerivO3CPU. If the check
# passes then attach the elastic trace probe.
# If restoring from checkpoint or fast forwarding, the code that does this for
# FutureCPUClass is in the Simulation module. If the check passes then the
# elastic trace probe is attached to the switch CPUs.
if options.elastic_trace_en and options.checkpoint_restore == None and \
not options.fast_forward:
CpuConfig.config_etrace(TestCPUClass, test_sys.cpu, options)
CacheConfig.config_cache(options, test_sys)
MemConfig.config_mem(options, test_sys)
if buildEnv['TARGET_ISA'] == "x86":
lapics = []
for i in xrange(np):
lapics.append(test_sys.cpu[i].interrupts[0])
test_sys.membus.lapics = lapics
return test_sys
system.workload.dtb_filename = args.dtb_filename
else:
generateDtb(system)
system.workload.dtb_filename = path.join(m5.options.outdir,
'device.dtb')
# Default DTB address if bbl is bulit with --with-dts option
system.workload.dtb_addr = 0x87e00000
# Linux boot command flags
if args.command_line:
system.workload.command_line = args.command_line
else:
kernel_cmd = ["console=ttyS0", "root=/dev/vda", "ro"]
system.workload.command_line = " ".join(kernel_cmd)
# ---------------------------- Default Setup --------------------------- #
if args.elastic_trace_en and args.checkpoint_restore == None and \
not args.fast_forward:
CpuConfig.config_etrace(CPUClass, system.cpu, args)
CacheConfig.config_cache(args, system)
MemConfig.config_mem(args, system)
root = Root(full_system=True, system=system)
Simulation.setWorkCountOptions(system, args)
Simulation.run(args, root, system, FutureClass)
def build_test_system(np):
cmdline = cmd_line_template()
if buildEnv['TARGET_ISA'] == "alpha":
test_sys = makeLinuxAlphaSystem(test_mem_mode, bm[0], options.ruby,
cmdline=cmdline)
elif buildEnv['TARGET_ISA'] == "mips":
test_sys = makeLinuxMipsSystem(test_mem_mode, bm[0], cmdline=cmdline)
elif buildEnv['TARGET_ISA'] == "sparc":
test_sys = makeSparcSystem(test_mem_mode, bm[0], cmdline=cmdline)
elif buildEnv['TARGET_ISA'] == "x86":
test_sys = makeLinuxX86System(test_mem_mode, np, bm[0], options.ruby,
cmdline=cmdline)
elif buildEnv['TARGET_ISA'] == "arm":
test_sys = makeArmSystem(
test_mem_mode,
options.machine_type,
np,
bm[0],
options.dtb_filename,
bare_metal=options.bare_metal,
cmdline=cmdline,
external_memory=options.external_memory_system,
ruby=options.ruby,
security=options.enable_security_extensions,
vio_9p=options.vio_9p,
bootloader=options.bootloader,
)
if options.enable_context_switch_stats_dump:
test_sys.enable_context_switch_stats_dump = True
else:
fatal("Incapable of building %s full system!", buildEnv['TARGET_ISA'])
# Set the cache line size for the entire system
test_sys.cache_line_size = options.cacheline_size
# Create a top-level voltage domain
test_sys.voltage_domain = VoltageDomain(voltage = options.sys_voltage)
# Create a source clock for the system and set the clock period
test_sys.clk_domain = SrcClockDomain(clock = options.sys_clock,
voltage_domain = test_sys.voltage_domain)
# Create a CPU voltage domain
test_sys.cpu_voltage_domain = VoltageDomain()
# Create a source clock for the CPUs and set the clock period
test_sys.cpu_clk_domain = SrcClockDomain(clock = options.cpu_clock,
voltage_domain =
test_sys.cpu_voltage_domain)
if options.kernel is not None:
test_sys.kernel = binary(options.kernel)
if options.script is not None:
test_sys.readfile = options.script
if options.lpae:
test_sys.have_lpae = True
if options.virtualisation:
test_sys.have_virtualization = True
test_sys.init_param = options.init_param
# For now, assign all the CPUs to the same clock domain
test_sys.cpu = [TestCPUClass(clk_domain=test_sys.cpu_clk_domain, cpu_id=i)
for i in range(np)]
if ObjectList.is_kvm_cpu(TestCPUClass) or \
ObjectList.is_kvm_cpu(FutureClass):
test_sys.kvm_vm = KvmVM()
if options.ruby:
bootmem = getattr(test_sys, '_bootmem', None)
Ruby.create_system(options, True, test_sys, test_sys.iobus,
test_sys._dma_ports, bootmem)
# Create a seperate clock domain for Ruby
test_sys.ruby.clk_domain = SrcClockDomain(clock = options.ruby_clock,
voltage_domain = test_sys.voltage_domain)
# Connect the ruby io port to the PIO bus,
# assuming that there is just one such port.
test_sys.iobus.master = test_sys.ruby._io_port.slave
for (i, cpu) in enumerate(test_sys.cpu):
#
# Tie the cpu ports to the correct ruby system ports
#
cpu.clk_domain = test_sys.cpu_clk_domain
cpu.createThreads()
cpu.createInterruptController()
cpu.icache_port = test_sys.ruby._cpu_ports[i].slave
cpu.dcache_port = test_sys.ruby._cpu_ports[i].slave
if buildEnv['TARGET_ISA'] in ("x86", "arm"):
cpu.itb.walker.port = test_sys.ruby._cpu_ports[i].slave
cpu.dtb.walker.port = test_sys.ruby._cpu_ports[i].slave
if buildEnv['TARGET_ISA'] in "x86":
cpu.interrupts[0].pio = test_sys.ruby._cpu_ports[i].master
cpu.interrupts[0].int_master = test_sys.ruby._cpu_ports[i].slave
cpu.interrupts[0].int_slave = test_sys.ruby._cpu_ports[i].master
else:
if options.caches or options.l2cache:
# By default the IOCache runs at the system clock
test_sys.iocache = IOCache(addr_ranges = test_sys.mem_ranges)
test_sys.iocache.cpu_side = test_sys.iobus.master
test_sys.iocache.mem_side = test_sys.membus.slave
elif not options.external_memory_system:
test_sys.iobridge = Bridge(delay='50ns', ranges = test_sys.mem_ranges)
test_sys.iobridge.slave = test_sys.iobus.master
test_sys.iobridge.master = test_sys.membus.slave
# Sanity check
if options.simpoint_profile:
if not ObjectList.is_noncaching_cpu(TestCPUClass):
fatal("SimPoint generation should be done with atomic cpu")
if np > 1:
fatal("SimPoint generation not supported with more than one CPUs")
for i in range(np):
if options.simpoint_profile:
test_sys.cpu[i].addSimPointProbe(options.simpoint_interval)
if options.checker:
test_sys.cpu[i].addCheckerCpu()
if not ObjectList.is_kvm_cpu(TestCPUClass):
if options.bp_type:
bpClass = ObjectList.bp_list.get(options.bp_type)
test_sys.cpu[i].branchPred = bpClass()
if options.indirect_bp_type:
IndirectBPClass = ObjectList.indirect_bp_list.get(
options.indirect_bp_type)
test_sys.cpu[i].branchPred.indirectBranchPred = \
IndirectBPClass()
test_sys.cpu[i].createThreads()
# If elastic tracing is enabled when not restoring from checkpoint and
# when not fast forwarding using the atomic cpu, then check that the
# TestCPUClass is DerivO3CPU or inherits from DerivO3CPU. If the check
# passes then attach the elastic trace probe.
# If restoring from checkpoint or fast forwarding, the code that does this for
# FutureCPUClass is in the Simulation module. If the check passes then the
# elastic trace probe is attached to the switch CPUs.
if options.elastic_trace_en and options.checkpoint_restore == None and \
not options.fast_forward:
CpuConfig.config_etrace(TestCPUClass, test_sys.cpu, options)
CacheConfig.config_cache(options, test_sys)
MemConfig.config_mem(options, test_sys)
return test_sys
def build_test_system(np):
cmdline = cmd_line_template()
if buildEnv['TARGET_ISA'] == "alpha":
test_sys = makeLinuxAlphaSystem(test_mem_mode,
bm[0],
options.ruby,
cmdline=cmdline)
elif buildEnv['TARGET_ISA'] == "mips":
test_sys = makeLinuxMipsSystem(test_mem_mode, bm[0], cmdline=cmdline)
elif buildEnv['TARGET_ISA'] == "sparc":
test_sys = makeSparcSystem(test_mem_mode, bm[0], cmdline=cmdline)
elif buildEnv['TARGET_ISA'] == "x86":
test_sys = makeLinuxX86System(test_mem_mode,
options.num_cpus,
bm[0],
options.ruby,
cmdline=cmdline)
elif buildEnv['TARGET_ISA'] == "arm":
test_sys = makeArmSystem(
test_mem_mode,
options.machine_type,
options.membus_width,
options,
options.num_cpus,
bm[0],
options.dtb_filename,
bare_metal=options.bare_metal,
cmdline=cmdline,
ignore_dtb=options.generate_dtb,
external_memory=options.external_memory_system,
ruby=options.ruby,
security=options.enable_security_extensions)
if options.enable_context_switch_stats_dump:
test_sys.enable_context_switch_stats_dump = True
else:
fatal("Incapable of building %s full system!", buildEnv['TARGET_ISA'])
# Set the cache line size for the entire system
test_sys.cache_line_size = options.cacheline_size
# Create a top-level voltage domain
test_sys.voltage_domain = VoltageDomain(voltage=options.sys_voltage)
# Create a source clock for the system and set the clock period
test_sys.clk_domain = SrcClockDomain(
clock=options.sys_clock, voltage_domain=test_sys.voltage_domain)
# Create a CPU voltage domain
test_sys.cpu_voltage_domain = VoltageDomain()
# Create a source clock for the CPUs and set the clock period
test_sys.cpu_clk_domain = SrcClockDomain(
clock=options.cpu_clock, voltage_domain=test_sys.cpu_voltage_domain)
if options.kernel is not None:
test_sys.kernel = binary(options.kernel)
if options.script is not None:
test_sys.readfile = options.script
if options.lpae:
test_sys.have_lpae = True
if options.virtualisation:
test_sys.have_virtualization = True
test_sys.init_param = options.init_param
# For now, assign all the CPUs to the same clock domain
test_sys.cpu = [
TestCPUClass(clk_domain=test_sys.cpu_clk_domain, cpu_id=i)
for i in xrange(np)
]
if is_kvm_cpu(TestCPUClass) or is_kvm_cpu(FutureClass):
test_sys.kvm_vm = KvmVM()
if options.ruby:
bootmem = getattr(test_sys, 'bootmem', None)
Ruby.create_system(options, True, test_sys, test_sys.iobus,
test_sys._dma_ports, bootmem)
# Create a seperate clock domain for Ruby
test_sys.ruby.clk_domain = SrcClockDomain(
clock=options.ruby_clock, voltage_domain=test_sys.voltage_domain)
# Connect the ruby io port to the PIO bus,
# assuming that there is just one such port.
test_sys.iobus.master = test_sys.ruby._io_port.slave
for (i, cpu) in enumerate(test_sys.cpu):
#
# Tie the cpu ports to the correct ruby system ports
#
cpu.clk_domain = test_sys.cpu_clk_domain
cpu.createThreads()
cpu.createInterruptController()
cpu.icache_port = test_sys.ruby._cpu_ports[i].slave
cpu.dcache_port = test_sys.ruby._cpu_ports[i].slave
if buildEnv['TARGET_ISA'] in ("x86", "arm"):
cpu.itb.walker.port = test_sys.ruby._cpu_ports[i].slave
cpu.dtb.walker.port = test_sys.ruby._cpu_ports[i].slave
if buildEnv['TARGET_ISA'] in "x86":
cpu.interrupts[0].pio = test_sys.ruby._cpu_ports[i].master
cpu.interrupts[0].int_master = test_sys.ruby._cpu_ports[
i].slave
cpu.interrupts[0].int_slave = test_sys.ruby._cpu_ports[
i].master
else:
if options.caches or options.l2cache:
# By default the IOCache runs at the system clock
test_sys.iocache = IOCache(addr_ranges=test_sys.mem_ranges)
test_sys.iocache.cpu_side = test_sys.iobus.master
test_sys.iocache.mem_side = test_sys.membus.slave
elif not options.external_memory_system:
test_sys.iobridge = Bridge(delay='50ns',
ranges=test_sys.mem_ranges)
test_sys.iobridge.slave = test_sys.iobus.master
test_sys.iobridge.master = test_sys.membus.slave
# Sanity check
if options.fastmem:
if TestCPUClass != AtomicSimpleCPU:
fatal("Fastmem can only be used with atomic CPU!")
if (options.caches or options.l2cache):
fatal("You cannot use fastmem in combination with caches!")
if options.simpoint_profile:
if not options.fastmem:
# Atomic CPU checked with fastmem option already
fatal(
"SimPoint generation should be done with atomic cpu and fastmem"
)
if np > 1:
fatal(
"SimPoint generation not supported with more than one CPUs"
)
for i in xrange(np):
if options.fastmem:
test_sys.cpu[i].fastmem = True
if options.simpoint_profile:
test_sys.cpu[i].addSimPointProbe(options.simpoint_interval)
if options.checker:
test_sys.cpu[i].addCheckerCpu()
test_sys.cpu[i].createThreads()
# If elastic tracing is enabled when not restoring from checkpoint and
# when not fast forwarding using the atomic cpu, then check that the
# TestCPUClass is DerivO3CPU or inherits from DerivO3CPU. If the check
# passes then attach the elastic trace probe.
# If restoring from checkpoint or fast forwarding, the code that does this for
# FutureCPUClass is in the Simulation module. If the check passes then the
# elastic trace probe is attached to the switch CPUs.
if options.elastic_trace_en and options.checkpoint_restore == None and \
not options.fast_forward:
CpuConfig.config_etrace(TestCPUClass, test_sys.cpu, options)
if buildEnv['TARGET_ISA'] != "arm" and options.workload_automation_vio:
warn("Ignoring --workload-automation-vio. It is unsupported on "
"non-ARM systems.")
elif options.workload_automation_vio:
from m5.objects import PciVirtIO, VirtIO9PDiod
viopci = PciVirtIO(
pci_bus=0,
pci_dev=test_sys.realview._num_pci_dev,
pci_func=0,
InterruptPin=1,
InterruptLine=test_sys.realview._num_pci_int_line)
test_sys.realview._num_pci_dev = test_sys.realview._num_pci_dev + 1
test_sys.realview._num_pci_int_line = test_sys.realview._num_pci_int_line + 1
viopci.vio = VirtIO9PDiod()
viopci.vio.root = options.workload_automation_vio
viopci.vio.socketPath = "/home/yqureshi/shares/local/scrap/temp"
test_sys.realview.viopci = viopci
test_sys.realview.viopci.dma = test_sys.iobus.slave
test_sys.realview.viopci.pio = test_sys.iobus.master
CacheConfig.config_cache(options, test_sys)
MemConfig.config_mem(options, test_sys)
return test_sys
def build_test_system(np):
cmdline = cmd_line_template()
if buildEnv['TARGET_ISA'] == "alpha":
test_sys = makeLinuxAlphaSystem(test_mem_mode,
bm[0],
options.ruby,
cmdline=cmdline)
elif buildEnv['TARGET_ISA'] == "mips":
test_sys = makeLinuxMipsSystem(test_mem_mode, bm[0], cmdline=cmdline)
elif buildEnv['TARGET_ISA'] == "sparc":
test_sys = makeSparcSystem(test_mem_mode, bm[0], cmdline=cmdline)
elif buildEnv['TARGET_ISA'] == "x86":
test_sys = makeLinuxX86System(test_mem_mode,
options.num_cpus,
bm[0],
options.ruby,
cmdline=cmdline)
elif buildEnv['TARGET_ISA'] == "arm":
test_sys = makeArmSystem(test_mem_mode, options.machine_type,
options.num_cpus, bm[0],
options.dtb_filename,
bare_metal=options.bare_metal,
cmdline=cmdline,
external_memory= \
options.external_memory_system,
ruby=options.ruby,
security=options.enable_security_extensions)
if options.enable_context_switch_stats_dump:
test_sys.enable_context_switch_stats_dump = True
else:
fatal("Incapable of building %s full system!", buildEnv['TARGET_ISA'])
# Set the cache line size for the entire system
test_sys.cache_line_size = options.cacheline_size
# Create a top-level voltage domain
test_sys.voltage_domain = VoltageDomain(voltage=options.sys_voltage)
# Create a source clock for the system and set the clock period
test_sys.clk_domain = SrcClockDomain(
clock=options.sys_clock, voltage_domain=test_sys.voltage_domain)
# Create a CPU voltage domain
test_sys.cpu_voltage_domain = VoltageDomain()
# Create a source clock for the CPUs and set the clock period
test_sys.cpu_clk_domain = SrcClockDomain(
clock=options.cpu_clock, voltage_domain=test_sys.cpu_voltage_domain)
if options.kernel is not None:
test_sys.kernel = binary(options.kernel)
if options.script is not None:
test_sys.readfile = options.script
if options.lpae:
test_sys.have_lpae = True
if options.virtualisation:
test_sys.have_virtualization = True
test_sys.init_param = options.init_param
# For now, assign all the CPUs to the same clock domain
if options.fi is not None:
fi_commands = options.fi.split(',')
if len(fi_commands) != 6:
print >> sys.stderr, \
"Incorrect format. Use -h to find correct format"
else: # won't catch all errors, but good first start
isa = String(fi_commands[0])
inj_tick = Tick(fi_commands[1])
inj_reg = fi_commands[2]
inj_bit = Int(fi_commands[3])
reg_type = Int(fi_commands[4])
src_dest = Int(fi_commands[5])
test_sys.cpu = [TestCPUClass(clk_domain= \
test_sys.cpu_clk_domain,
cpu_id=i,
injector=Injector(ISA=isa,
injTick=inj_tick,
injPC='',
injReg=inj_reg,
injBit=inj_bit,
regType=reg_type,
srcDest=src_dest)) for i in xrange(np)]
if options.timeout:
for i in xrange(np):
test_sys.cpu[i].injector.timeout = options.timeout
if options.golden_file:
for i in xrange(np):
test_sys.cpu[i].injector.goldenFile = options.golden_file
else:
test_sys.cpu = [
TestCPUClass(clk_domain=test_sys.cpu_clk_domain, cpu_id=i)
for i in xrange(np)
]
if is_kvm_cpu(TestCPUClass) or is_kvm_cpu(FutureClass):
test_sys.kvm_vm = KvmVM()
if options.ruby:
# Check for timing mode because ruby does not support atomic accesses
if not (options.cpu_type == "DerivO3CPU"
or options.cpu_type == "TimingSimpleCPU"):
print >> sys.stderr, "Ruby requires TimingSimpleCPU or O3CPU!!"
sys.exit(1)
Ruby.create_system(options, True, test_sys, test_sys.iobus,
test_sys._dma_ports)
# Create a seperate clock domain for Ruby
test_sys.ruby.clk_domain = SrcClockDomain(clock = options.ruby_clock,
voltage_domain = \
test_sys.voltage_domain)
# Connect the ruby io port to the PIO bus,
# assuming that there is just one such port.
test_sys.iobus.master = test_sys.ruby._io_port.slave
for (i, cpu) in enumerate(test_sys.cpu):
#
# Tie the cpu ports to the correct ruby system ports
#
cpu.clk_domain = test_sys.cpu_clk_domain
cpu.createThreads()
cpu.createInterruptController()
cpu.icache_port = test_sys.ruby._cpu_ports[i].slave
cpu.dcache_port = test_sys.ruby._cpu_ports[i].slave
if buildEnv['TARGET_ISA'] in ("x86", "arm"):
cpu.itb.walker.port = test_sys.ruby._cpu_ports[i].slave
cpu.dtb.walker.port = test_sys.ruby._cpu_ports[i].slave
if buildEnv['TARGET_ISA'] in "x86":
cpu.interrupts[0].pio = test_sys.ruby._cpu_ports[i].master
cpu.interrupts[0].int_master = \
test_sys.ruby._cpu_ports[i].slave
cpu.interrupts[0].int_slave = \
test_sys.ruby._cpu_ports[i].master
else:
if options.caches or options.l2cache:
# By default the IOCache runs at the system clock
test_sys.iocache = IOCache(addr_ranges=test_sys.mem_ranges)
test_sys.iocache.cpu_side = test_sys.iobus.master
test_sys.iocache.mem_side = test_sys.membus.slave
elif not options.external_memory_system:
test_sys.iobridge = Bridge(delay='50ns',
ranges=test_sys.mem_ranges)
test_sys.iobridge.slave = test_sys.iobus.master
test_sys.iobridge.master = test_sys.membus.slave
# Sanity check
if options.fastmem:
if TestCPUClass != AtomicSimpleCPU:
fatal("Fastmem can only be used with atomic CPU!")
if (options.caches or options.l2cache):
fatal("You cannot use fastmem in combination with caches!")
if options.simpoint_profile:
if not options.fastmem:
# Atomic CPU checked with fastmem option already
fatal("SimPoint generation should be done",
"with atomic cpu and fastmem")
if np > 1:
fatal("SimPoint generation not supported with",
"more than one CPUs")
for i in xrange(np):
if options.fastmem:
test_sys.cpu[i].fastmem = True
if options.simpoint_profile:
test_sys.cpu[i].addSimPointProbe(options.simpoint_interval)
if options.checker:
test_sys.cpu[i].addCheckerCpu()
test_sys.cpu[i].createThreads()
# If elastic tracing is enabled when not restoring from checkpoint and
# when not fast forwarding using the atomic cpu, then check that the
# TestCPUClass is DerivO3CPU or inherits from DerivO3CPU. If the check
# passes then attach the elastic trace probe.
# If restoring from checkpoint or fast forwarding, the code that does this for
# FutureCPUClass is in the Simulation module. If the check passes then the
# elastic trace probe is attached to the switch CPUs.
if options.elastic_trace_en and options.checkpoint_restore == None and \
not options.fast_forward:
CpuConfig.config_etrace(TestCPUClass, test_sys.cpu, options)
CacheConfig.config_cache(options, test_sys)
MemConfig.config_mem(options, test_sys)
return test_sys
def addNoISAOptions(parser):
parser.add_option("-n", "--num-cpus", type="int", default=1)
parser.add_option("--sys-voltage", action="store", type="string",
default='1.0V',
help = """Top-level voltage for blocks running at system
power supply""")
parser.add_option("--sys-clock", action="store", type="string",
default='1GHz',
help = """Top-level clock for blocks running at system
speed""")
# Memory Options
parser.add_option("--list-mem-types",
action="callback", callback=_listMemTypes,
help="List available memory types")
parser.add_option("--mem-type", type="choice", default="DDR3_1600_8x8",
choices=ObjectList.mem_list.get_names(),
help = "type of memory to use")
parser.add_option("--mem-channels", type="int", default=1,
help = "number of memory channels")
parser.add_option("--mem-ranks", type="int", default=None,
help = "number of memory ranks per channel")
parser.add_option("--mem-size", action="store", type="string",
default="128MB",
help="Specify the physical memory size (single memory)")
parser.add_option("--enable-dram-powerdown", action="store_true",
help="Enable low-power states in DRAMCtrl")
parser.add_option("--mem-channels-intlv", type="int", default=0,
help="Memory channels interleave")
parser.add_option("--memchecker", action="store_true")
# Cache Options
parser.add_option("--external-memory-system", type="string",
help="use external ports of this port_type for caches")
parser.add_option("--tlm-memory", type="string",
help="use external port for SystemC TLM cosimulation")
parser.add_option("--caches", action="store_true")
parser.add_option("--l2cache", action="store_true")
parser.add_option("--enable_prefetchers", action="store_true")
parser.add_option("--prefetcher-type", type="choice", default="tagged",
choices=CacheConfig.prefetcher_names(),
help = "type of cache prefetcher to use")
parser.add_option("--num-dirs", type="int", default=1)
parser.add_option("--num-l2caches", type="int", default=1)
parser.add_option("--num-l3caches", type="int", default=1)
parser.add_option("--l1d_size", type="string", default="64kB")
parser.add_option("--l1i_size", type="string", default="32kB")
parser.add_option("--l2_size", type="string", default="2MB")
parser.add_option("--l3_size", type="string", default="16MB")
parser.add_option("--l1d_assoc", type="int", default=2)
parser.add_option("--l1i_assoc", type="int", default=2)
parser.add_option("--l2_assoc", type="int", default=8)
parser.add_option("--l3_assoc", type="int", default=16)
parser.add_option("--l1d_hit_latency", type="int", default="2")
parser.add_option("--l1i_hit_latency", type="int", default="2")
parser.add_option("--l2_hit_latency", type="int", default="20")
parser.add_option("--cacheline_size", type="int", default=64)
parser.add_option("--xbar_width", type="int", default=16)
parser.add_option("--record-dram-traffic", action="store_true",
help="Record DRAM memory traffic packets to file (requires protobuf).")
# Enable Ruby
parser.add_option("--ruby", action="store_true")
# Run duration options
parser.add_option("-m", "--abs-max-tick", type="int", default=m5.MaxTick,
metavar="TICKS", help="Run to absolute simulated tick "
"specified including ticks from a restored checkpoint")
parser.add_option("--rel-max-tick", type="int", default=None,
metavar="TICKS", help="Simulate for specified number of"
" ticks relative to the simulation start tick (e.g. if "
"restoring a checkpoint)")
parser.add_option("--maxtime", type="float", default=None,
help="Run to the specified absolute simulated time in "
"seconds")
parser.add_option("-P", "--param", action="append", default=[],
help="Set a SimObject parameter relative to the root node. "
"An extended Python multi range slicing syntax can be used "
"for arrays. For example: "
"'system.cpu[0,1,3:8:2].max_insts_all_threads = 42' "
"sets max_insts_all_threads for cpus 0, 1, 3, 5 and 7 "
"Direct parameters of the root object are not accessible, "
"only parameters of its children.")
