def run(options, root, testsys, cpu_class):
if options.checkpoint_dir:
cptdir = options.checkpoint_dir
elif m5.options.outdir:
cptdir = m5.options.outdir
else:
cptdir = getcwd()
if options.fast_forward and options.checkpoint_restore != None:
fatal("Can't specify both --fast-forward and --checkpoint-restore")
if options.fast_forward_pseudo_inst and options.checkpoint_restore != None:
fatal("Can't specify both --fast-forward-pseudo-inst and --checkpoint-restore")
if options.standard_switch and not options.caches:
fatal("Must specify --caches when using --standard-switch")
if options.standard_switch and options.repeat_switch:
fatal("Can't specify both --standard-switch and --repeat-switch")
if options.repeat_switch and options.take_checkpoints:
fatal("Can't specify both --repeat-switch and --take-checkpoints")
np = options.num_cpus
switch_cpus = None
if options.prog_interval:
for i in xrange(np):
testsys.cpu[i].progress_interval = options.prog_interval
if options.maxinsts:
for i in xrange(np):
testsys.cpu[i].max_insts_any_thread = options.maxinsts
if cpu_class:
switch_cpus = [cpu_class(switched_out=True, cpu_id=(i))
for i in xrange(np)]
# [SafeSpec] configure simualtion scheme
if cpu_class == DerivO3CPU:
#fatal("Ruby can only be used with DerivO3CPU!")
CpuConfig.config_scheme(cpu_class, switch_cpus, options)
else:
warn("restoring from a checkpoint, "
"but not simulate using DerivO3CPU.")
for i in xrange(np):
if options.fast_forward:
testsys.cpu[i].max_insts_any_thread = int(options.fast_forward)
switch_cpus[i].system = testsys
switch_cpus[i].workload = testsys.cpu[i].workload
switch_cpus[i].clk_domain = testsys.cpu[i].clk_domain
switch_cpus[i].progress_interval = \
testsys.cpu[i].progress_interval
switch_cpus[i].isa = testsys.cpu[i].isa
# simulation period
if options.maxinsts:
switch_cpus[i].max_insts_any_thread = options.maxinsts
# Add checker cpu if selected
if options.checker:
switch_cpus[i].addCheckerCpu()
# from future gem5 version: add branch predictor
if options.bp_type:
bpClass = ObjectList.bp_list.get(options.bp_type)
switch_cpus[i].branchPred = bpClass()
# from future gem5 version: add indirect branch predictor
if options.indirect_bp_type:
IndirectBPClass = ObjectList.indirect_bp_list.get(
options.indirect_bp_type)
switch_cpus[i].branchPred.indirectBranchPred = \
IndirectBPClass()
# If elastic tracing is enabled attach the elastic trace probe
# to the switch CPUs
if options.elastic_trace_en:
CpuConfig.config_etrace(cpu_class, switch_cpus, options)
testsys.switch_cpus = switch_cpus
switch_cpu_list = [(testsys.cpu[i], switch_cpus[i]) for i in xrange(np)]
if options.repeat_switch:
switch_class = getCPUClass(options.cpu_type)[0]
if switch_class.require_caches() and \
not options.caches:
print ("%s: Must be used with caches" % str(switch_class))
sys.exit(1)
if not switch_class.support_take_over():
print ("%s: CPU switching not supported" % str(switch_class))
sys.exit(1)
repeat_switch_cpus = [switch_class(switched_out=True, \
cpu_id=(i)) for i in xrange(np)]
for i in xrange(np):
repeat_switch_cpus[i].system = testsys
repeat_switch_cpus[i].workload = testsys.cpu[i].workload
repeat_switch_cpus[i].clk_domain = testsys.cpu[i].clk_domain
repeat_switch_cpus[i].isa = testsys.cpu[i].isa
if options.maxinsts:
repeat_switch_cpus[i].max_insts_any_thread = options.maxinsts
if options.checker:
repeat_switch_cpus[i].addCheckerCpu()
testsys.repeat_switch_cpus = repeat_switch_cpus
if cpu_class:
repeat_switch_cpu_list = [(switch_cpus[i], repeat_switch_cpus[i])
for i in xrange(np)]
else:
repeat_switch_cpu_list = [(testsys.cpu[i], repeat_switch_cpus[i])
for i in xrange(np)]
if options.standard_switch:
switch_cpus = [TimingSimpleCPU(switched_out=True, cpu_id=(i))
for i in xrange(np)]
switch_cpus_1 = [DerivO3CPU(switched_out=True, cpu_id=(i))
for i in xrange(np)]
for i in xrange(np):
switch_cpus[i].system = testsys
switch_cpus_1[i].system = testsys
switch_cpus[i].workload = testsys.cpu[i].workload
switch_cpus_1[i].workload = testsys.cpu[i].workload
switch_cpus[i].clk_domain = testsys.cpu[i].clk_domain
switch_cpus_1[i].clk_domain = testsys.cpu[i].clk_domain
switch_cpus[i].isa = testsys.cpu[i].isa
switch_cpus_1[i].isa = testsys.cpu[i].isa
# if restoring, make atomic cpu simulate only a few instructions
if options.checkpoint_restore != None:
testsys.cpu[i].max_insts_any_thread = 1
# Fast forward to specified location if we are not restoring
elif options.fast_forward:
testsys.cpu[i].max_insts_any_thread = int(options.fast_forward)
# Fast forward to a simpoint (warning: time consuming)
elif options.simpoint:
if testsys.cpu[i].workload[0].simpoint == 0:
fatal('simpoint not found')
testsys.cpu[i].max_insts_any_thread = \
testsys.cpu[i].workload[0].simpoint
# No distance specified, just switch
# else:
# testsys.cpu[i].max_insts_any_thread = 1
# warmup period
if options.warmup_insts:
switch_cpus[i].max_insts_any_thread = options.warmup_insts
# simulation period
if options.maxinsts:
switch_cpus_1[i].max_insts_any_thread = options.maxinsts
# attach the checker cpu if selected
if options.checker:
switch_cpus[i].addCheckerCpu()
switch_cpus_1[i].addCheckerCpu()
testsys.switch_cpus = switch_cpus
testsys.switch_cpus_1 = switch_cpus_1
switch_cpu_list = [(testsys.cpu[i], switch_cpus[i]) for i in xrange(np)]
switch_cpu_list1 = [(switch_cpus[i], switch_cpus_1[i]) for i in xrange(np)]
# set the checkpoint in the cpu before m5.instantiate is called
if options.take_checkpoints != None and \
(options.simpoint or options.at_instruction):
offset = int(options.take_checkpoints)
# Set an instruction break point
if options.simpoint:
for i in xrange(np):
if testsys.cpu[i].workload[0].simpoint == 0:
fatal('no simpoint for testsys.cpu[%d].workload[0]', i)
checkpoint_inst = int(testsys.cpu[i].workload[0].simpoint) + offset
testsys.cpu[i].max_insts_any_thread = checkpoint_inst
# used for output below
options.take_checkpoints = checkpoint_inst
else:
options.take_checkpoints = offset
# Set all test cpus with the right number of instructions
# for the upcoming simulation
for i in xrange(np):
testsys.cpu[i].max_insts_any_thread = offset
if options.take_simpoint_checkpoints != None:
simpoints, interval_length = parseSimpointAnalysisFile(options, testsys)
checkpoint_dir = None
if options.checkpoint_restore:
cpt_starttick, checkpoint_dir = findCptDir(options, cptdir, testsys)
m5.instantiate(checkpoint_dir)
# Initialization is complete. If we're not in control of simulation
# (that is, if we're a slave simulator acting as a component in another
# 'master' simulator) then we're done here. The other simulator will
# call simulate() directly. --initialize-only is used to indicate this.
if options.initialize_only:
return
# Handle the max tick settings now that tick frequency was resolved
# during system instantiation
# NOTE: the maxtick variable here is in absolute ticks, so it must
# include any simulated ticks before a checkpoint
explicit_maxticks = 0
maxtick_from_abs = m5.MaxTick
maxtick_from_rel = m5.MaxTick
maxtick_from_maxtime = m5.MaxTick
if options.abs_max_tick:
maxtick_from_abs = options.abs_max_tick
explicit_maxticks += 1
if options.rel_max_tick:
maxtick_from_rel = options.rel_max_tick
if options.checkpoint_restore:
# NOTE: this may need to be updated if checkpoints ever store
# the ticks per simulated second
maxtick_from_rel += cpt_starttick
if options.at_instruction or options.simpoint:
warn("Relative max tick specified with --at-instruction or" \
" --simpoint\n These options don't specify the " \
"checkpoint start tick, so assuming\n you mean " \
"absolute max tick")
explicit_maxticks += 1
if options.maxtime:
maxtick_from_maxtime = m5.ticks.fromSeconds(options.maxtime)
explicit_maxticks += 1
if explicit_maxticks > 1:
warn("Specified multiple of --abs-max-tick, --rel-max-tick, --maxtime."\
" Using least")
maxtick = min([maxtick_from_abs, maxtick_from_rel, maxtick_from_maxtime])
if options.checkpoint_restore != None and maxtick < cpt_starttick:
fatal("Bad maxtick (%d) specified: " \
"Checkpoint starts starts from tick: %d", maxtick, cpt_starttick)
if options.standard_switch or cpu_class:
if options.standard_switch:
print ("Switch at instruction count:%s" % str(testsys.cpu[0].max_insts_any_thread))
exit_event = m5.simulate()
elif cpu_class and options.fast_forward:
print ("Switch at instruction count:%s" % str(testsys.cpu[0].max_insts_any_thread))
exit_event = m5.simulate()
elif cpu_class and options.fast_forward_pseudo_inst:
print ("Switch at beginning of ROI")
exit_event = m5.simulate()
else:
print ("Switch at curTick count:%s" % str(10000))
exit_event = m5.simulate(10000)
if options.fast_forward_pseudo_inst:
while exit_event.getCause() != 'switchcpu':
print ('Exiting @ tick %i because %s' % (m5.curTick(), exit_event.getCause()))
exit_event = m5.simulate()
print ("Switched CPUS @ tick %s" % (m5.curTick()))
m5.switchCpus(testsys, switch_cpu_list)
if options.standard_switch:
print ("Switch at instruction count:%d" % (testsys.switch_cpus[0].max_insts_any_thread))
#warmup instruction count may have already been set
if options.warmup_insts:
exit_event = m5.simulate()
else:
exit_event = m5.simulate(options.standard_switch)
print ("Switching CPUS @ tick %s" % (m5.curTick()))
print ("Simulation ends instruction count:%d" % (testsys.switch_cpus_1[0].max_insts_any_thread))
m5.switchCpus(testsys, switch_cpu_list1)
# If we're taking and restoring checkpoints, use checkpoint_dir
# option only for finding the checkpoints to restore from. This
# lets us test checkpointing by restoring from one set of
# checkpoints, generating a second set, and then comparing them.
if (options.take_checkpoints or options.take_simpoint_checkpoints) \
and options.checkpoint_restore:
if m5.options.outdir:
cptdir = m5.options.outdir
else:
cptdir = getcwd()
if options.take_checkpoints != None :
# Checkpoints being taken via the command line at <when> and at
# subsequent periods of <period>. Checkpoint instructions
# received from the benchmark running are ignored and skipped in
# favor of command line checkpoint instructions.
exit_event = scriptCheckpoints(options, maxtick, cptdir)
# Take SimPoint checkpoints
elif options.take_simpoint_checkpoints != None:
takeSimpointCheckpoints(simpoints, interval_length, cptdir)
# Restore from SimPoint checkpoints
elif options.restore_simpoint_checkpoint != None:
restoreSimpointCheckpoint()
else:
if options.fast_forward or options.fast_forward_pseudo_inst:
m5.stats.reset()
print ("**** REAL SIMULATION ****")
# If checkpoints are being taken, then the checkpoint instruction
# will occur in the benchmark code it self.
if options.repeat_switch and maxtick > options.repeat_switch:
exit_event = repeatSwitch(testsys, repeat_switch_cpu_list,
maxtick, options.repeat_switch)
else:
exit_event = benchCheckpoints(options, maxtick, cptdir)
m5.stats.dump()
print ('Exiting @ tick %i because %s' % (m5.curTick(), exit_event.getCause()))
if options.checkpoint_at_end:
m5.checkpoint(joinpath(cptdir, "cpt.%d"))
if not m5.options.interactive:
sys.exit(exit_event.getCode())
for i in xrange(np):
ruby_port = system.ruby._cpu_ports[i]
# Create the interrupt controller and connect its ports to Ruby
# Note that the interrupt controller is always present but only
# in x86 does it have message ports that need to be connected
system.cpu[i].createInterruptController()
# Connect the cpu's cache ports to Ruby
system.cpu[i].icache_port = ruby_port.slave
system.cpu[i].dcache_port = ruby_port.slave
if buildEnv['TARGET_ISA'] == 'x86':
system.cpu[i].interrupts[0].pio = ruby_port.master
system.cpu[i].interrupts[0].int_master = ruby_port.slave
system.cpu[i].interrupts[0].int_slave = ruby_port.master
system.cpu[i].itb.walker.port = ruby_port.slave
system.cpu[i].dtb.walker.port = ruby_port.slave
else:
MemClass = Simulation.setMemClass(options)
system.membus = SystemXBar()
system.system_port = system.membus.slave
CacheConfig.config_cache(options, system)
MemConfig.config_mem(options, system)
# [InvisiSpec] Configure simulation scheme
if CPUClass == DerivO3CPU:
CpuConfig.config_scheme(CPUClass, system.cpu, options)
root = Root(full_system = False, system = system)
Simulation.run(options, root, system, FutureClass)
# Sanity checks
if options.dtb_filename:
fatal("--generate-dtb and --dtb-filename cannot be specified at the"\
"same time.")
if options.machine_type not in ["VExpress_GEM5", "VExpress_GEM5_V1"]:
warn("Can only correctly generate a dtb for VExpress_GEM5_V1 " \
"platforms, unless custom hardware models have been equipped "\
"with generation functionality.")
# Generate a Device Tree
def create_dtb_for_system(system, filename):
state = FdtState(addr_cells=2, size_cells=2, cpu_cells=1)
rootNode = system.generateDeviceTree(state)
fdt = Fdt()
fdt.add_rootnode(rootNode)
dtb_filename = os.path.join(m5.options.outdir, filename)
return fdt.writeDtbFile(dtb_filename)
for sysname in ('system', 'testsys', 'drivesys'):
if hasattr(root, sysname):
sys = getattr(root, sysname)
sys.dtb_filename = create_dtb_for_system(sys, '%s.dtb' % sysname)
if TestCPUClass == DerivO3CPU:
CpuConfig.config_scheme(TestCPUClass, test_sys.cpu, options)
Simulation.setWorkCountOptions(test_sys, options)
Simulation.run(options, root, test_sys, FutureClass)
