def save_preset(self):
#get all the options
presets = self.settings.get(['Temp_Preset'])
current_screen = roboprinter.robosm.current
name = next(iter(self.selected_option))
def save_new_entry():
#delete old entry
if self.original_option != None:
del presets[self.original_option]
#save new entry
presets[name] = self.selected_option[name]
#save
self.settings.set(['Temp_Preset'], presets)
self.settings.save()
#update screen
self.callback(name)
def cancel():
#go back to previous screen
roboprinter.robosm.current = current_screen
#check for duplicate names
if name in presets and name != self.original_option and not self.confirm_overwrite:
#make the modal screen
body_text = lang.pack['Preheat']['Duplicate']['Body_Text'] + str(
name) + lang.pack['Preheat']['Duplicate']['Body_Text1']
modal_screen = Modal_Question_No_Title(
body_text, lang.pack['Preheat']['Duplicate']['option1'],
lang.pack['Preheat']['Duplicate']['option2'], save_new_entry,
cancel)
#make screen
roboprinter.robosm._generate_backbutton_screen(
name='duplicate_error',
title=lang.pack['Preheat']['Duplicate']['Title'],
back_destination=current_screen,
content=modal_screen)
else:
save_new_entry()
def get_keyboard_results(self, result):
def overwrite():
Logger.info("Result is: " + str(result))
name = next(iter(self.selected_option))
temp_option = {
result: {
'Extruder1': self.selected_option[name]['Extruder1'],
'Bed': self.selected_option[name]['Bed']
}
}
Logger.info(str(temp_option))
self.selected_option = temp_option
self.name_button.title = lang.pack['Preheat']['Edit_Preset'][
'Name'] + result
roboprinter.robosm.current = 'edit_preheat'
self.confirm_overwrite = True
def cancel():
name = next(iter(self.selected_option))
self.show_keyboard(name)
#check if the result will overwrite an existing preset
preheat_settings = self.settings.get(['Temp_Preset'])
if result in preheat_settings or result == lang.pack['Preheat'][
'Edit_Preset']['Name_Default']:
#make the modal screen
body_text = lang.pack['Preheat']['Duplicate']['Body_Text'] + str(
result) + lang.pack['Preheat']['Duplicate']['Body_Text1']
modal_screen = Modal_Question_No_Title(
body_text, lang.pack['Preheat']['Duplicate']['option1'],
lang.pack['Preheat']['Duplicate']['option2'], overwrite,
cancel)
#make screen
roboprinter.robosm._generate_backbutton_screen(
name='duplicate_error',
title=lang.pack['Preheat']['Duplicate']['Title'],
back_destination='edit_preheat',
content=modal_screen)
else:
overwrite()
def switch_to_preheat(self, option):
#get all temperature presets
acceptable_selections = self.settings.get(['Temp_Preset'])
#make sure the selection is a valid selection from the dictionary
if option in acceptable_selections:
#make the options parameters
title = option
temp_ext1 = acceptable_selections[option]['Extruder1']
temp_bed = acceptable_selections[option]['Bed']
body_text = '[size=40][color=#69B3E7][font=fonts/S-Core - CoreSansD55Bold.otf][b]' + title + "[/color][/b][/font]\n[size=30]" + lang.pack[
'Preheat']['Extruder'] + str(temp_ext1) + lang.pack['Preheat'][
'Celsius_Alone'] + "\n" + lang.pack['Preheat']['Bed'] + str(
temp_bed) + lang.pack['Preheat']['Celsius_Alone']
#alter the view for the model:
if self.model == "Robo C2":
body_text = '[size=40][color=#69B3E7][font=fonts/S-Core - CoreSansD55Bold.otf][b]' + title + "[/color][/b][/font]\n[size=30]" + lang.pack[
'Preheat']['Extruder'] + str(
temp_ext1) + lang.pack['Preheat']['Celsius_Alone']
#these options lead to callbacks that will either set the temperature or edit the option
option1 = partial(self.set_temp, extruder=temp_ext1, bed=temp_bed)
option2 = partial(self.edit, option=title)
option1_text = lang.pack['Preheat']['Preheat']
if self.end_point != None:
option1_text = lang.pack['Preheat']['Select']
#body_text, option1_text, option2_text, option1_function, option2_function
modal_screen = Modal_Question_No_Title(
body_text, option1_text, lang.pack['Preheat']['Edit'], option1,
option2)
#make screen
roboprinter.robosm._generate_backbutton_screen(
name='view_preheat',
title=lang.pack['Preheat']['Edit_Preset']['Select_Preset'],
back_destination=self._name,
content=modal_screen,
backbutton_callback=self.c.update)
def reset_defaults(self, placeholder):
#get the current screen
back_screen = roboprinter.robosm.current
def reset():
roboprinter.printer_instance._printer.commands("M502")
roboprinter.printer_instance._printer.commands("M500")
roboprinter.printer_instance._printer.commands("M501")
#make screen to say that the variables have been reset
#body_text, button_function, button_text = roboprinter.lang.pack['Button_Screen']['Default_Button']
content = Button_Screen(roboprinter.lang.pack['EEPROM']['Acknowledge_Reset']['Body_Text'],
self.sm.go_back_to_main,
button_text = roboprinter.lang.pack['EEPROM']['Acknowledge_Reset']['Button'])
#make screen
roboprinter.robosm._generate_backbutton_screen(name='ack_reset_eeprom',
title = roboprinter.lang.pack['EEPROM']['Acknowledge_Reset']['Title'] ,
back_destination=back_screen,
content=content)
def cancel():
roboprinter.robosm.current = back_screen
#make the confirmation screen
#body_text, option1_text, option2_text, option1_function, option2_function
content = Modal_Question_No_Title(roboprinter.lang.pack['EEPROM']['Reset_Confirmation']['Body_Text'],
roboprinter.lang.pack['EEPROM']['Reset_Confirmation']['positive'],
roboprinter.lang.pack['EEPROM']['Reset_Confirmation']['negative'],
reset,
cancel)
#make screen
roboprinter.robosm._generate_backbutton_screen(name='reset_eeprom',
title = roboprinter.lang.pack['EEPROM']['Reset_Confirmation']['Title'] ,
back_destination=back_screen,
content=content)
def mainboard_status(self, **kwargs):
back_screen = self.current
def refresh_screen():
title = roboprinter.lang.pack['Mainboard']['Connection_Title']
body_text = roboprinter.lang.pack['Mainboard'][
'Connection_Body']
button_text = roboprinter.lang.pack['Mainboard'][
'Connection_Button']
layout = Refresh_Screen(title,
body_text,
button_text,
start_refresh=True)
self._generate_backbutton_screen(
name=kwargs['name'],
title=kwargs['title'],
back_destination=kwargs['back_destination'],
content=layout)
def go_back():
self.current = back_screen
#make confirmation screen
content = Modal_Question_No_Title(
roboprinter.lang.pack['Error_Detection']['MAINBOARD']
['Reset_Confirmation']['Body'],
roboprinter.lang.pack['Error_Detection']['MAINBOARD']
['Reset_Confirmation']['positive'],
roboprinter.lang.pack['Error_Detection']['MAINBOARD']
['Reset_Confirmation']['negative'], refresh_screen, go_back)
#make screen
roboprinter.robosm._generate_backbutton_screen(
name='refresh_confirmation',
title=roboprinter.lang.pack['Error_Detection']['MAINBOARD']
['Reset_Confirmation']['Title'],
back_destination=back_screen,
content=content)
def delete_preset(self):
screen = roboprinter.robosm.current
def delete():
#get all the options
presets = self.settings.get(['Temp_Preset'])
#delete entry
name = next(iter(self.selected_option))
del presets[name]
#save
self.settings.set(['Temp_Preset'], presets)
self.settings.save()
#Info Popup saying that we deleted the preset
title = lang.pack['Preheat']['Delete']['Deleted']
ep = Error_Popup(name, title, callback=self.delete_callback)
ep.show()
def cancel():
roboprinter.robosm.current = screen
#make the modal screen
name = next(iter(self.selected_option))
body_text = lang.pack['Preheat']['Delete']['Body'] + str(
name) + lang.pack['Preheat']['Delete']['Q_Mark']
modal_screen = Modal_Question_No_Title(
body_text, lang.pack['Preheat']['Delete']['positive'],
lang.pack['Preheat']['Delete']['negative'], delete, cancel)
#make screen
roboprinter.robosm._generate_backbutton_screen(
name='delete_preset',
title=lang.pack['Preheat']['Delete']['Title'],
back_destination=screen,
content=modal_screen)
def system_handler(self, **kwargs):
option = kwargs['name']
acceptable_options = {
'Shutdown': {
'command':
'sudo shutdown -h now',
'popup':
"WARNING",
'error':
roboprinter.lang.pack['System']['Shutdown_Title'],
'body_text':
roboprinter.lang.pack['System']['Shutdown_Body'],
'delay':
5,
'confirmation':
True,
'Title':
roboprinter.lang.pack['System']['Shutdown_Confirmation']
['Title'],
'Body_Text':
roboprinter.lang.pack['System']['Shutdown_Confirmation']
['Body_Text']
},
'Reboot': {
'command':
'sudo reboot',
'popup':
"WARNING",
'error':
roboprinter.lang.pack['System']['Reboot_Title'],
'body_text':
roboprinter.lang.pack['System']['Reboot_Body'],
'delay':
5,
'confirmation':
True,
'Title':
roboprinter.lang.pack['System']['Reboot_Confirmation']
['Title'],
'Body_Text':
roboprinter.lang.pack['System']['Reboot_Confirmation']
['Body_Text']
},
'umount': {
'command':
'sudo umount /dev/sda1'
if not 'usb_location' in session_saver.saved else
'sudo umount ' + session_saver.saved['usb_location'],
'popup':
"ERROR",
'error':
roboprinter.lang.pack['System']['USB_Title'],
'body_text':
roboprinter.lang.pack['System']['USB_Body'],
'delay':
0.1,
'confirmation':
False
},
}
if option in acceptable_options:
def show_error():
popup = acceptable_options[option]['popup']
if popup == "WARNING":
Logger.info("Showing Warning")
wp = Warning_Popup(
acceptable_options[option]['error'],
acceptable_options[option]['body_text'])
wp.show()
elif popup == "ERROR":
Logger.info("Showing Error")
ep = Error_Popup(
acceptable_options[option]['error'],
acceptable_options[option]['body_text'],
callback=partial(
roboprinter.robosm.go_back_to_main,
tab='printer_status_tab'))
ep.show()
Logger.info("Executing: " +
acceptable_options[option]['command'])
self.shell_command = acceptable_options[option]['command']
Clock.schedule_once(self.execute_function,
acceptable_options[option]['delay'])
def go_back(back):
self.current = back
if acceptable_options[option]['confirmation']:
#make a confirmation screen
back_screen = self.current
back_function = partial(go_back, back=back_screen)
content = Modal_Question_No_Title(
acceptable_options[option]['Body_Text'],
roboprinter.lang.pack['System']['positive'],
roboprinter.lang.pack['System']['negative'],
show_error, back_function)
#make screen
roboprinter.robosm._generate_backbutton_screen(
name='view_preheat',
title=acceptable_options[option]['Title'],
back_destination=back_screen,
content=content)
else:
show_error()
else:
Logger.info('Not an acceptable system option' + str(option))
def delete(self):
current_screen = roboprinter.robosm.current
def confirm_delete():
if self.isFolder:
#delete the folder
try:
path = "/".join(self.path)
#path = roboprinter.printer_instance._file_manager.path_on_disk('local', path)
roboprinter.printer_instance._file_manager.remove_folder(
'local', path, recursive=True)
roboprinter.robosm.go_back_to_main('files_tab')
except Exception as e:
Logger.info("!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! " + str(e))
traceback.print_exc()
ep = Error_Popup(
roboprinter.lang.pack['Files']['Error']['Title'],
roboprinter.lang.pack['Files']['Error']['Body'],
callback=partial(roboprinter.robosm.go_back_to_main,
tab='printer_status_tab'))
ep.open()
#delete the file
else:
try:
path = roboprinter.printer_instance._file_manager.path_in_storage(
'local', self.path)
roboprinter.printer_instance._file_manager.remove_file(
'local', path)
roboprinter.robosm.go_back_to_main('files_tab')
except Exception as e:
Logger.info("!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! " + str(e))
traceback.print_exc()
ep = Error_Popup(
roboprinter.lang.pack['Files']['Error']['Title'],
roboprinter.lang.pack['Files']['Error']['Body'],
callback=partial(roboprinter.robosm.go_back_to_main,
tab='printer_status_tab'))
ep.open()
Clock.schedule_once(self.update_files, 2)
def cancel():
roboprinter.robosm.current = current_screen
#set variables for Folder or File
title = roboprinter.lang.pack['Files']['Delete_File_Conf']['Title']
body = roboprinter.lang.pack['Files']['Delete_File_Conf']['Body']
pos = roboprinter.lang.pack['Files']['Delete_File_Conf']['positive']
neg = roboprinter.lang.pack['Files']['Delete_File_Conf']['negative']
if self.isFolder:
title = roboprinter.lang.pack['Files']['Delete_Folder_Conf'][
'Title']
body = roboprinter.lang.pack['Files']['Delete_Folder_Conf']['Body']
#make confirmation screen
content = Modal_Question_No_Title(body, pos, neg, confirm_delete,
cancel)
#make screen
roboprinter.robosm._generate_backbutton_screen(
name='delete_confirmation',
title=title,
back_destination=current_screen,
content=content)
