def __init__(self, sim_env):
''' Constructor
Input: sim_env simpy.Environment environment of this component
MessageClass AbstractBusMessage class that is used for sending and receiving
Output: -
'''
AbstractCommModule.__init__(self, sim_env)
# layers
self.transp_lay = StdTransportLayer(sim_env)
self.datalink_lay = StdDatalinkLayer(sim_env)
self.physical_lay = StdPhysicalLayer(sim_env)
# preset used
if GeneralSpecPreset().enabled:
self.transp_lay = GeneralSpecPreset().transport_layer(sim_env, proj.BUS_MSG_CLASS)
self.datalink_lay = GeneralSpecPreset().datalink_layer(sim_env)
self.physical_lay = GeneralSpecPreset().physical_layer(sim_env)
# interconnect layers
self.datalink_lay.physical_lay = self.physical_lay
self.transp_lay.datalink_lay = self.datalink_lay
self.set_settings()
# Timing Variables
self.STDCM_RECEIVE_PROCESS = time.STDCM_RECEIVE_PROCESS
self.STDCM_SEND_PROCESS = time.STDCM_SEND_PROCESS
def __init__(self, sim_env, ecu_id):
''' Constructor
Input: ecu_id string id of the corresponding AbstractECU
sim_env simpy.Environment environment of this component
Output: -
'''
AbstractCommModule.__init__(self, sim_env)
# local parameters
self._ecu_id = ecu_id
self._jitter_in = 1
self.monitor_list = RefList()
# initialize
self._init_layers(self.sim_env, self.MessageClass)
# add tags
self._tags = ["AUTH_SEND_TIME_BEFORE_ENCRYPTION", "AUTH_SEND_TIME_AFTER_ENCRYPTION", "AUTH_RECEIVE_TIME_BEFORE_DECRYPTION", "AUTH_RECEIVE_TIME_AFTER_DECRYPTION"]
# NEW: Add key pair - public and private
assymetric_encryption_algorithm = AsymAuthMechEnum.RSA
assymetric_encryption_key_length = AuKeyLengthEnum.bit_512
assymetric_encryption_option = 65537
self.priv_key, self.pub_key = encryption_tools.asy_get_key_pair(assymetric_encryption_algorithm, assymetric_encryption_key_length, assymetric_encryption_option)
PublicKeyManager().add_key(self._ecu_id, self.pub_key) # make public key available to everybody
# Create a certificate from root L3 along L3 L31 L311
[certificate, root_certificates_to_verify_this_certificate, priv_key] = GeneralSpecPreset().certificate_manager.generate_valid_ecu_cert(self._ecu_id, CAEnum.CA_L311, 0, float('inf'))
self.my_certificate = certificate
self.my_root_certificates = root_certificates_to_verify_this_certificate
def connected_bus(self, new_bus):
''' if called adds a new port to this
gateway. This port has all three layers
and a whole hardware equipment
Input: new_bus CANBus bus to be connected to new port
Output: -
'''
if new_bus != None:
# create whole layer package per connected Bus
self._connected_busses.append(new_bus)
# create layers
# preset used
if GeneralSpecPreset().enabled:
self._transceivers.append(StdTransceiver(self.sim_env))
self._controller.append(StdCanController(self.sim_env))
self._physical_layer.append(GeneralSpecPreset().physical_layer(
self.sim_env))
self._datalink_layer.append(GeneralSpecPreset().datalink_layer(
self.sim_env))
else:
self._transceivers.append(StdTransceiver(self.sim_env))
self._controller.append(StdCanController(self.sim_env))
self._physical_layer.append(StdPhysicalLayer(self.sim_env))
self._datalink_layer.append(StdDatalinkLayer(self.sim_env))
# interconnect new layers
self._datalink_layer[-1].controller = self._controller[-1]
self.sim_env.process(self._datalink_layer[-1].process())
self._datalink_layer[-1].physical_lay = self._physical_layer[-1]
self._physical_layer[-1].transceiver = self._transceivers[-1]
self._physical_layer[
-1].transceiver.connected_bus = self._connected_busses[-1]
# intercept gateway methods
self._override_methods(self._physical_layer[-1].transceiver)
# activate filter
if self._filter_values: # install the fixed filter for all ecus
self._transceivers[-1].install_filter(self._filter_values)
if new_bus.comp_id in self._bus_filter_values: # install the filter for special busses
self._transceivers[-1].install_filter(
self._bus_filter_values[new_bus.comp_id])
def __init__(self, sim_env):
''' Constructor
Input: sim_env simpy.Environment environment of this component
Output: -
'''
AbstractCommModule.__init__(self, sim_env)
# initialize layers
self.transp_lay = FakeSegmentTransportLayer(sim_env,
proj.BUS_MSG_CLASS)
self.datalink_lay = StdDatalinkLayer(sim_env)
self.physical_lay = StdPhysicalLayer(sim_env)
# preset used
if GeneralSpecPreset().enabled:
self.transp_lay = GeneralSpecPreset().transport_layer(
sim_env, proj.BUS_MSG_CLASS)
self.datalink_lay = GeneralSpecPreset().datalink_layer(sim_env)
self.physical_lay = GeneralSpecPreset().physical_layer(sim_env)
# connect layers
self.datalink_lay.physical_lay = self.physical_lay
self.transp_lay.datalink_lay = self.datalink_lay
LWASpecPresets().ecu_certificate_spec = [HashMechEnum.MD5, AsymAuthMechEnum.RSA, AuKeyLengthEnum.bit_512, 65537, 1, 1000] # ecu certificate info LWASpecPresets().confirmation_part = [100] # confirmation message size LWASpecPresets().ecu_key_info = [SymAuthMechEnum.AES, AuKeyLengthEnum.bit_128, SymAuthMechEnum.ECB] # ecu key specification LWASpecPresets().hold_rule = [False, 10] # hold on/off; minimal interval between two stream requests LWASpecPresets().request_spec = [100, 9999999999] # size of request message and timeout maximum LWASpecPresets().deny_spec = [100] # deny message size LWASpecPresets().grant_spec = [100] # grant message size LWASpecPresets().session_key_info = [SymAuthMechEnum.AES, AuKeyLengthEnum.bit_128, SymAuthMechEnum.ECB] # session key information # set further layer specifications GeneralSpecPreset().enable() GeneralSpecPreset().physical_layer = StdPhysicalLayer GeneralSpecPreset().datalink_layer = StdDatalinkLayer # datalink layer that is used in all ECUs that implement this option GeneralSpecPreset().transport_layer = FakeSegmentTransportLayer TimingDBMap().enable_fallback_message = True #=============================================================================== # Setting up a project #=============================================================================== # register ECUs that are located outside of the usual folders # usual folders: components.base.ecu.types and components.security.ecu.types #api.register_ecu_classes(r"C:\Users\artur.mrowca\workspace\ECUSimulation\components\base\gateways") # setup the logging
# -> Setup logging
# -> Create Environment
#===============================================================================
api.register_ecu_classes(os.path.join(os.path.dirname(__file__), "ecus"))
# setup the logging
api_log_path = os.path.join(os.path.dirname(__file__), "logs/api.log")
api.show_logging(logging.INFO, api_log_path, True)
# create an empty environment specification for the environment
sim_env = api.create_environment(200)
#===========================================================================
# Create Certificate Manager
#===========================================================================
GeneralSpecPreset().certificate_manager = api.create_cert_manager()
#===============================================================================
# Creating ECUs
#===============================================================================
# create ECU with specification A
ecu_spec = RegularECUSpec(["My_Test_ECU_1"], 20000, 20000)
ecu_spec.add_sending_actions(
2, 0.5, 16, "TEST STRING B", 50
) # sends a at time 10, 10.5, 11... message id 16, content test string b and size 50
ecu_group_1 = api.set_ecus(sim_env, 1, 'MyProtocolECU', ecu_spec)
# create 2 ECUs with specification B (here: same as A)
ecu_spec = RegularECUSpec(["My_Test_ECU_2", "My_Test_ECU_3"], 20000, 20000)
ecu_group_3 = api.set_ecus(sim_env, 2, 'MyProtocolECU', ecu_spec)
