def ip_pool_add(cidrs, version, ipip, masquerade):
"""
Add the given CIDRS to the IP address allocation pool.
:param cidrs: The pools to set in CIDR format, e.g. 192.168.0.0/16
:param version: 4 or 6
:param ipip: Use IP in IP for the pool(s).
:param masquerade: Enable masquerade (outgoing NAT) for the pool(s).
:return: None
"""
if version == 6 and ipip:
print "IP in IP not supported for IPv6 pools"
sys.exit(1)
# TODO Reject any cidrs that overlap with existing cidrs in the pool
pools = []
for cidr in cidrs:
try:
pools.append(IPPool(cidr, ipip=ipip, masquerade=masquerade))
except CidrTooSmallError:
print "An IPv%s pool must have a prefix length of %s or lower." \
"\nGiven: %s.\nNo pools added." % \
(version, BLOCK_PREFIXLEN[version], cidr)
sys.exit(1)
for pool in pools:
client.add_ip_pool(version, pool)
def ip_pool_range_add(start_ip, end_ip, version, ipip, masquerade):
"""
Add the range of ip addresses as CIDRs to the IP address allocation pool.
:param start_ip: The first ip address the ip range.
:param end_ip: The last ip address in the ip range.
:param version: 4 or 6
:param ipip: Use IP in IP for this pool.
:return: None
"""
if version == 6 and ipip:
print "IP in IP not supported for IPv6 pools"
sys.exit(1)
ip_range = IPRange(start_ip, end_ip)
pools = client.get_ip_pools(version)
for pool in pools:
pool_net = IPNetwork(pool.cidr)
# Reject the new ip range if any of the following are true:
# - The new ip range contains all ips of any existing pool
# - An existing pool overlaps ips with the start of the new ip range
# - An existing pool overlaps ips with the end of the new ip range
if (pool_net in ip_range or
start_ip in pool_net or
end_ip in pool_net):
print "Cannot add range - range conflicts with pool %s" % pool.cidr
sys.exit(1)
cidrs = netaddr.iprange_to_cidrs(start_ip, end_ip)
for ip_net in cidrs:
new_pool = IPPool(ip_net.cidr, ipip=ipip, masquerade=masquerade)
client.add_ip_pool(version, new_pool)
def ip_pool_range_add(start_ip, end_ip, version, ipip, masquerade):
"""
Add the range of ip addresses as CIDRs to the IP address allocation pool.
:param start_ip: The first ip address the ip range.
:param end_ip: The last ip address in the ip range.
:param version: 4 or 6
:param ipip: Use IP in IP for this pool.
:return: None
"""
if version == 6 and ipip:
print "IP in IP not supported for IPv6 pools"
sys.exit(1)
ip_range = IPRange(start_ip, end_ip)
pools = client.get_ip_pools(version)
for pool in pools:
pool_net = IPNetwork(pool.cidr)
# Reject the new ip range if any of the following are true:
# - The new ip range contains all ips of any existing pool
# - An existing pool overlaps ips with the start of the new ip range
# - An existing pool overlaps ips with the end of the new ip range
if (pool_net in ip_range or start_ip in pool_net
or end_ip in pool_net):
print "Cannot add range - range conflicts with pool %s" % pool.cidr
sys.exit(1)
cidrs = netaddr.iprange_to_cidrs(start_ip, end_ip)
for ip_net in cidrs:
new_pool = IPPool(ip_net.cidr, ipip=ipip, masquerade=masquerade)
client.add_ip_pool(version, new_pool)
def ip_pool_add(cidrs, version, ipip, masquerade):
"""
Add the given CIDRS to the IP address allocation pool.
:param cidrs: The pools to set in CIDR format, e.g. 192.168.0.0/16
:param version: 4 or 6
:param ipip: Use IP in IP for the pool(s).
:param masquerade: Enable masquerade (outgoing NAT) for the pool(s).
:return: None
"""
if version == 6 and ipip:
print "IP in IP not supported for IPv6 pools"
sys.exit(1)
current_pools = client.get_ip_pools(version)
new_pools = []
# Ensure new pools are valid and do not overlap with each other or existing
# pools.
for cidr in cidrs:
try:
pool = IPPool(cidr, ipip=ipip, masquerade=masquerade)
except InvalidBlockSizeError:
print "An IPv%s pool must have a prefix length of %s or lower." \
"\nGiven: %s.\nNo pools added." % \
(version, BLOCK_PREFIXLEN[version], cidr)
sys.exit(1)
# Check if new pool overlaps with any existing pool
overlapping_pool = _get_overlapping_pool(pool, current_pools)
if overlapping_pool:
print "Cannot add IP pool %s - pool overlaps with an " \
"existing pool %s" % (cidr, overlapping_pool.cidr)
sys.exit(1)
# Check if this new pool overlaps with any other new pool
overlapping_pool = _get_overlapping_pool(pool, new_pools)
if overlapping_pool:
print "Cannot add IP pool %s - pool overlaps with another " \
"new pool %s" % (cidr, overlapping_pool.cidr)
sys.exit(1)
# Append pool to pending list of new pools to add to Calico
new_pools.append(pool)
# Make client call to add each pool to Calico
for new_pool in new_pools:
client.add_ip_pool(version, new_pool)
def ip_pool_add(cidrs, version, ipip, masquerade):
"""
Add the given CIDRS to the IP address allocation pool.
:param cidrs: The pools to set in CIDR format, e.g. 192.168.0.0/16
:param version: 4 or 6
:param ipip: Use IP in IP for the pool(s).
:param masquerade: Enable masquerade (outgoing NAT) for the pool(s).
:return: None
"""
if version == 6 and ipip:
print "IP in IP not supported for IPv6 pools"
sys.exit(1)
current_pools = client.get_ip_pools(version)
new_pools = []
# Ensure new pools are valid and do not overlap with each other or existing
# pools.
for cidr in cidrs:
try:
pool = IPPool(cidr, ipip=ipip, masquerade=masquerade)
except InvalidBlockSizeError:
print "An IPv%s pool must have a prefix length of %s or lower." \
"\nGiven: %s.\nNo pools added." % \
(version, BLOCK_PREFIXLEN[version], cidr)
sys.exit(1)
# Check if new pool overlaps with any existing pool
overlapping_pool = _get_overlapping_pool(pool, current_pools)
if overlapping_pool:
print "Cannot add IP pool %s - pool overlaps with an " \
"existing pool %s" % (cidr, overlapping_pool.cidr)
sys.exit(1)
# Check if this new pool overlaps with any other new pool
overlapping_pool = _get_overlapping_pool(pool, new_pools)
if overlapping_pool:
print "Cannot add IP pool %s - pool overlaps with another " \
"new pool %s" % (cidr, overlapping_pool.cidr)
sys.exit(1)
# Append pool to pending list of new pools to add to Calico
new_pools.append(pool)
# Make client call to add each pool to Calico
for new_pool in new_pools:
client.add_ip_pool(version, new_pool)
def ip_pool_add(cidrs, version, ipip, masquerade):
"""
Add the given CIDRS to the IP address allocation pool.
:param cidrs: The pools to set in CIDR format, e.g. 192.168.0.0/16
:param version: 4 or 6
:param ipip: Use IP in IP for this pool.
:return: None
"""
if version == 6 and ipip:
print "IP in IP not supported for IPv6 pools"
sys.exit(1)
# TODO Reject any cidrs that overlap with existing cidrs in the pool
for cidr in cidrs:
pool = IPPool(cidr, ipip=ipip, masquerade=masquerade)
client.add_ip_pool(version, pool)
def ip_pool_add(cidrs, version, ipip, masquerade):
"""
Add the given CIDRS to the IP address allocation pool.
:param cidrs: The pools to set in CIDR format, e.g. 192.168.0.0/16
:param version: 4 or 6
:param ipip: Use IP in IP for this pool.
:return: None
"""
if version == 6 and ipip:
print "IP in IP not supported for IPv6 pools"
sys.exit(1)
# TODO Reject any cidrs that overlap with existing cidrs in the pool
for cidr in cidrs:
pool = IPPool(cidr, ipip=ipip, masquerade=masquerade)
client.add_ip_pool(version, pool)
def ip_pool_range_add(start_ip, end_ip, version, ipip, masquerade):
"""
Add the range of ip addresses as CIDRs to the IP address allocation pool.
:param start_ip: The first ip address the ip range.
:param end_ip: The last ip address in the ip range.
:param version: 4 or 6
:param ipip: Use IP in IP for the pool(s).
:param masquerade: Enable masquerade (outgoing NAT) for the pool(s).
:return: None
"""
if version == 6 and ipip:
print "IP in IP not supported for IPv6 pools"
sys.exit(1)
ip_range = IPRange(start_ip, end_ip)
pools = client.get_ip_pools(version)
for pool in pools:
pool_net = IPNetwork(pool.cidr)
# Reject the new ip range if any of the following are true:
# - The new ip range contains all ips of any existing pool
# - An existing pool overlaps ips with the start of the new ip range
# - An existing pool overlaps ips with the end of the new ip range
if (pool_net in ip_range or
start_ip in pool_net or
end_ip in pool_net):
print "Cannot add range - range conflicts with pool %s" % pool.cidr
sys.exit(1)
cidrs = netaddr.iprange_to_cidrs(start_ip, end_ip)
new_pools = []
for ip_net in cidrs:
try:
new_pools.append(IPPool(ip_net.cidr, ipip=ipip, masquerade=masquerade))
except CidrTooSmallError:
pool_strings = [str(net) for net in cidrs]
print "IPv%s ranges are split into pools, with the smallest pool " \
"size allowed having a prefix length of /%s. One or more " \
"of the generated pools is too small (prefix length is too " \
"high).\nRange given: %s - %s\nPools: %s\nNo pools added." % \
(version, BLOCK_PREFIXLEN[version], start_ip, end_ip,
pool_strings)
sys.exit(1)
for new_pool in new_pools:
client.add_ip_pool(version, new_pool)
def node_start(node_image, log_dir, ip, ip6, as_num, detach, kubernetes):
"""
Create the calico-node container and establish Calico networking on this
host.
:param ip: The IPv4 address of the host.
:param node_image: The calico-node image to use.
:param ip6: The IPv6 address of the host (or None if not configured)
:param as_num: The BGP AS Number to use for this node. If not specified
the global default value will be used.
:param detach: True to run in Docker's "detached" mode, False to run
attached.
:return: None.
"""
# Print warnings for any known system issues before continuing
check_system(fix=False, quit_if_error=False)
# Ensure log directory exists
if not os.path.exists(log_dir):
os.makedirs(log_dir)
# Get IP address of host, if none was specified
if not ip:
ips = get_host_ips(exclude=["docker0"])
try:
ip = ips.pop()
except IndexError:
print "Couldn't autodetect a management IP address. Please provide" \
" an IP by rerunning the command with the --ip=<IP_ADDRESS> flag."
sys.exit(1)
else:
print "No IP provided. Using detected IP: %s" % ip
# Verify that the chosen IP exists on the current host
warn_if_unknown_ip(ip, ip6)
# Warn if this hostname conflicts with an existing host
warn_if_hostname_conflict(ip)
# Install kubernetes plugin
if kubernetes:
try:
# Attempt to install to the default kubernetes directory
install_kubernetes(KUBERNETES_PLUGIN_DIR)
except OSError:
# Use the backup directory
install_kubernetes(KUBERNETES_PLUGIN_DIR_BACKUP)
# Set up etcd
ipv4_pools = client.get_ip_pools(4)
ipv6_pools = client.get_ip_pools(6)
# Create default pools if required
if not ipv4_pools:
client.add_ip_pool(4, DEFAULT_IPV4_POOL)
if not ipv6_pools:
client.add_ip_pool(6, DEFAULT_IPV6_POOL)
client.ensure_global_config()
client.create_host(hostname, ip, ip6, as_num)
try:
docker_client.remove_container("calico-node", force=True)
except docker.errors.APIError as err:
if err.response.status_code != 404:
raise
# Always try to convert the address(hostname) to an IP. This is a noop if
# the address is already an IP address. Note that the format of the authority
# string has already been validated.
etcd_authority = os.getenv(ETCD_AUTHORITY_ENV, ETCD_AUTHORITY_DEFAULT)
etcd_authority_address, etcd_authority_port = etcd_authority.split(':')
etcd_authority = '%s:%s' % (socket.gethostbyname(etcd_authority_address),
etcd_authority_port)
environment = [
"HOSTNAME=%s" % hostname,
"IP=%s" % ip,
"IP6=%s" % (ip6 or ""),
"ETCD_AUTHORITY=%s" % etcd_authority, # etcd host:port
"FELIX_ETCDADDR=%s" % etcd_authority, # etcd host:port
"POLICY_ONLY_CALICO=%s" % os.getenv(POLICY_ONLY_ENV, ""),
]
binds = {
"/proc": {
"bind": "/proc_host",
"ro": False
},
log_dir: {
"bind": "/var/log/calico",
"ro": False
},
"/run/docker/plugins": {
"bind": "/usr/share/docker/plugins",
"ro": False
}
}
host_config = docker.utils.create_host_config(
privileged=True,
restart_policy={"Name": "Always"},
network_mode="host",
binds=binds)
_find_or_pull_node_image(node_image)
container = docker_client.create_container(
node_image,
name="calico-node",
detach=True,
environment=environment,
host_config=host_config,
volumes=["/proc_host", "/var/log/calico", "/usr/share/docker/plugins"])
cid = container["Id"]
docker_client.start(container)
print "Calico node is running with id: %s" % cid
if not detach:
_attach_and_stream(container)
def node_start(node_image, runtime, log_dir, ip, ip6, as_num, detach,
kubernetes_version, rkt, libnetwork_image):
"""
Create the calico-node container and establish Calico networking on this
host.
:param ip: The IPv4 address of the host.
:param node_image: The calico-node image to use.
:param ip6: The IPv6 address of the host (or None if not configured)
:param as_num: The BGP AS Number to use for this node. If not specified
the global default value will be used.
:param detach: True to run in Docker's "detached" mode, False to run
attached.
:param kubernetes_version: The version of the calico-kubernetes plugin to
install, or None if the plugin should not be installed.
:param rkt: True to install the rkt plugin, False otherwise.
:param libnetwork_image: The name of the Calico libnetwork driver image to
use. None, if not using libnetwork.
:return: None.
"""
# Normally, Felix will load the modules it needs, but when running inside a
# container it might not be able to so ensure the required modules are
# loaded each time the node starts.
# This is just a best error attempt, as the modules might be builtins.
# We'll warn during the check_system() if the modules are unavailable.
try:
call(["modprobe", "-a"] + REQUIRED_MODULES)
except OSError:
pass
# Print warnings for any known system issues before continuing
using_docker = True if runtime == 'docker' else False
(_, _, etcd_ok) = \
check_system(quit_if_error=False, libnetwork=libnetwork_image,
check_docker=using_docker)
if not etcd_ok:
sys.exit(1)
# We will always want to setup IP forwarding
_setup_ip_forwarding()
# Ensure log directory exists
if not os.path.exists(log_dir):
os.makedirs(log_dir)
# Get IP address of host, if none was specified
if not ip:
ips = get_host_ips(exclude=["^docker.*", "^cbr.*"])
try:
ip = ips.pop()
except IndexError:
print "Couldn't autodetect a management IP address. Please provide" \
" an IP by rerunning the command with the --ip=<IP_ADDRESS> flag."
sys.exit(1)
else:
print "No IP provided. Using detected IP: %s" % ip
# Verify that the chosen IP exists on the current host
warn_if_unknown_ip(ip, ip6)
# Warn if this hostname conflicts with an existing host
warn_if_hostname_conflict(ip)
# Install Kubernetes plugin
if kubernetes_version:
# Build a URL based on the provided Kubernetes_version.
url = KUBERNETES_BINARY_URL % kubernetes_version
try:
# Attempt to install to the default Kubernetes directory
install_plugin(KUBERNETES_PLUGIN_DIR, url)
except OSError:
# Use the backup directory
install_plugin(KUBERNETES_PLUGIN_DIR_BACKUP, url)
# Install rkt plugin
if rkt:
try:
# Attempt to install to the default rkt directory
install_plugin(RKT_PLUGIN_DIR, RKT_BINARY_URL)
except OSError:
# Use the backup directory
install_plugin(RKT_PLUGIN_DIR_BACKUP, RKT_BINARY_URL)
# Set up etcd
ipv4_pools = client.get_ip_pools(4)
ipv6_pools = client.get_ip_pools(6)
# Create default pools if required
if not ipv4_pools:
client.add_ip_pool(4, DEFAULT_IPV4_POOL)
if not ipv6_pools:
client.add_ip_pool(6, DEFAULT_IPV6_POOL)
client.ensure_global_config()
client.create_host(hostname, ip, ip6, as_num)
# Always try to convert the address(hostname) to an IP. This is a noop if
# the address is already an IP address. Note that the format of the authority
# string has already been validated.
etcd_authority = os.getenv(ETCD_AUTHORITY_ENV, ETCD_AUTHORITY_DEFAULT)
etcd_authority_address, etcd_authority_port = etcd_authority.split(':')
etcd_authority = '%s:%s' % (socket.gethostbyname(etcd_authority_address),
etcd_authority_port)
if runtime == 'docker':
_start_node_container(ip, ip6, etcd_authority, log_dir, node_image, detach)
if libnetwork_image:
_start_libnetwork_container(etcd_authority, libnetwork_image)
def node_start(node_image, runtime, log_dir, ip, ip6, as_num, detach,
kubernetes_version, rkt, libnetwork_image):
"""
Create the calico-node container and establish Calico networking on this
host.
:param ip: The IPv4 address of the host.
:param node_image: The calico-node image to use.
:param ip6: The IPv6 address of the host (or None if not configured)
:param as_num: The BGP AS Number to use for this node. If not specified
the global default value will be used.
:param detach: True to run in Docker's "detached" mode, False to run
attached.
:param kubernetes_version: The version of the calico-kubernetes plugin to
install, or None if the plugin should not be installed.
:param rkt: True to install the rkt plugin, False otherwise.
:param libnetwork_image: The name of the Calico libnetwork driver image to
use. None, if not using libnetwork.
:return: None.
"""
# Normally, Felix will load the modules it needs, but when running inside a
# container it might not be able to so ensure the required modules are
# loaded each time the node starts.
# This is just a best error attempt, as the modules might be builtins.
# We'll warn during the check_system() if the modules are unavailable.
try:
call(["modprobe", "-a"] + REQUIRED_MODULES)
except OSError:
pass
# Print warnings for any known system issues before continuing
using_docker = True if runtime == 'docker' else False
(_, _, etcd_ok) = \
check_system(quit_if_error=False, libnetwork=libnetwork_image,
check_docker=using_docker)
if not etcd_ok:
sys.exit(1)
# We will always want to setup IP forwarding
_setup_ip_forwarding()
# Ensure log directory exists
if not os.path.exists(log_dir):
os.makedirs(log_dir)
# Get IP address of host, if none was specified
if not ip:
ips = get_host_ips(exclude=["^docker.*", "^cbr.*"])
try:
ip = ips.pop()
except IndexError:
print "Couldn't autodetect a management IP address. Please provide" \
" an IP by rerunning the command with the --ip=<IP_ADDRESS> flag."
sys.exit(1)
else:
print "No IP provided. Using detected IP: %s" % ip
# Verify that the chosen IP exists on the current host
warn_if_unknown_ip(ip, ip6)
# Warn if this hostname conflicts with an existing host
warn_if_hostname_conflict(ip)
# Install Kubernetes plugin
if kubernetes_version:
# Build a URL based on the provided Kubernetes_version.
url = KUBERNETES_BINARY_URL % kubernetes_version
try:
# Attempt to install to the default Kubernetes directory
install_plugin(KUBERNETES_PLUGIN_DIR, url)
except OSError:
# Use the backup directory
install_plugin(KUBERNETES_PLUGIN_DIR_BACKUP, url)
# Install rkt plugin
if rkt:
try:
# Attempt to install to the default rkt directory
install_plugin(RKT_PLUGIN_DIR, RKT_BINARY_URL)
except OSError:
# Use the backup directory
install_plugin(RKT_PLUGIN_DIR_BACKUP, RKT_BINARY_URL)
# Set up etcd
ipv4_pools = client.get_ip_pools(4)
ipv6_pools = client.get_ip_pools(6)
# Create default pools if required
if not ipv4_pools:
client.add_ip_pool(4, DEFAULT_IPV4_POOL)
if not ipv6_pools:
client.add_ip_pool(6, DEFAULT_IPV6_POOL)
client.ensure_global_config()
client.create_host(hostname, ip, ip6, as_num)
# Always try to convert the address(hostname) to an IP. This is a noop if
# the address is already an IP address. Note that the format of the authority
# string has already been validated.
etcd_authority = os.getenv(ETCD_AUTHORITY_ENV, ETCD_AUTHORITY_DEFAULT)
etcd_authority_address, etcd_authority_port = etcd_authority.split(':')
etcd_authority = '%s:%s' % (socket.gethostbyname(etcd_authority_address),
etcd_authority_port)
if runtime == 'docker':
_start_node_container(ip, ip6, etcd_authority, log_dir, node_image,
detach)
if libnetwork_image:
_start_libnetwork_container(etcd_authority, libnetwork_image)
def node_start(node_image, runtime, log_dir, ip, ip6, as_num, detach,
libnetwork_image):
"""
Create the calico-node container and establish Calico networking on this
host.
:param ip: The IPv4 address of the host.
:param node_image: The calico-node image to use.
:param ip6: The IPv6 address of the host (or None if not configured)
:param as_num: The BGP AS Number to use for this node. If not specified
the global default value will be used.
:param detach: True to run in Docker's "detached" mode, False to run
attached.
:param libnetwork_image: The name of the Calico libnetwork driver image to
use. None, if not using libnetwork.
:return: None.
"""
# Normally, Felix will load the modules it needs, but when running inside a
# container it might not be able to do so. Ensure the required modules are
# loaded each time the node starts.
# We only make a best effort attempt because the command may fail if the
# modules are built in.
# We'll warn during the check_system() if the modules are unavailable.
if not running_in_container():
try:
call(["modprobe", "-a"] + REQUIRED_MODULES)
except OSError:
pass
# We will always want to setup IP forwarding
_setup_ip_forwarding()
# Print warnings for any known system issues before continuing
if runtime == 'docker' and not running_in_container():
using_docker = True
else:
using_docker = False
(_, _, etcd_ok) = \
check_system(quit_if_error=False, libnetwork=libnetwork_image,
check_docker=using_docker,
check_modules=not running_in_container())
if not etcd_ok:
sys.exit(1)
# Ensure log directory exists
if not os.path.exists(log_dir):
os.makedirs(log_dir)
# Get IP address of host, if none was specified
if not ip:
ips = get_host_ips(exclude=["^docker.*", "^cbr.*",
"virbr.*", "lxcbr.*", "veth.*",
"cali.*", "tunl.*"])
try:
ip = ips.pop()
except IndexError:
print "Couldn't autodetect a management IP address. Please provide" \
" an IP by rerunning the command with the --ip=<IP_ADDRESS> flag."
sys.exit(1)
else:
print "No IP provided. Using detected IP: %s" % ip
# Verify that IPs are not already in use by another host.
error_if_bgp_ip_conflict(ip, ip6)
# Verify that the chosen IP exists on the current host
warn_if_unknown_ip(ip, ip6)
# Warn if this hostname conflicts with an existing host
warn_if_hostname_conflict(ip)
# Set up etcd
ipv4_pools = client.get_ip_pools(4)
ipv6_pools = client.get_ip_pools(6)
# Create default pools if required
if not ipv4_pools:
client.add_ip_pool(4, DEFAULT_IPV4_POOL)
if not ipv6_pools:
client.add_ip_pool(6, DEFAULT_IPV6_POOL)
client.ensure_global_config()
client.create_host(hostname, ip, ip6, as_num)
# If IPIP is enabled, the host requires an IP address for its tunnel
# device, which is in an IPIP pool. Without this, a host can't originate
# traffic to a pool address because the response traffic would not be
# routed via the tunnel (likely being dropped by RPF checks in the fabric).
ipv4_pools = client.get_ip_pools(4)
ipip_pools = [p for p in ipv4_pools if p.ipip]
if ipip_pools:
# IPIP is enabled, make sure the host has an address for its tunnel.
_ensure_host_tunnel_addr(ipv4_pools, ipip_pools)
else:
# No IPIP pools, clean up any old address.
_remove_host_tunnel_addr()
# The format of the authority string has already been validated.
etcd_authority = os.getenv(ETCD_AUTHORITY_ENV, ETCD_AUTHORITY_DEFAULT)
# Get etcd SSL environment variables if they exist
etcd_scheme = os.getenv(ETCD_SCHEME_ENV, ETCD_SCHEME_DEFAULT)
etcd_key_file = os.getenv(ETCD_KEY_FILE_ENV, None)
etcd_cert_file = os.getenv(ETCD_CERT_FILE_ENV, None)
etcd_ca_cert_file = os.getenv(ETCD_CA_CERT_FILE_ENV, None)
etcd_volumes = []
etcd_binds = {}
etcd_envs = ["ETCD_AUTHORITY=%s" % etcd_authority,
"ETCD_SCHEME=%s" % etcd_scheme]
felix_envs = ["FELIX_ETCDADDR=%s" % etcd_authority,
"FELIX_ETCDSCHEME=%s" % etcd_scheme]
if etcd_ca_cert_file and etcd_key_file and etcd_cert_file:
etcd_volumes.append(ETCD_CA_CERT_NODE_FILE)
etcd_binds[etcd_ca_cert_file] = {"bind": ETCD_CA_CERT_NODE_FILE,
"ro": True}
etcd_envs.append("ETCD_CA_CERT_FILE=%s" % ETCD_CA_CERT_NODE_FILE)
felix_envs.append("FELIX_ETCDCAFILE=%s" % ETCD_CA_CERT_NODE_FILE)
etcd_volumes.append(ETCD_KEY_NODE_FILE)
etcd_binds[etcd_key_file] = {"bind": ETCD_KEY_NODE_FILE,
"ro": True}
etcd_envs.append("ETCD_KEY_FILE=%s" % ETCD_KEY_NODE_FILE)
felix_envs.append("FELIX_ETCDKEYFILE=%s" % ETCD_KEY_NODE_FILE)
etcd_volumes.append(ETCD_CERT_NODE_FILE)
etcd_binds[etcd_cert_file] = {"bind": ETCD_CERT_NODE_FILE,
"ro": True}
etcd_envs.append("ETCD_CERT_FILE=%s" % ETCD_CERT_NODE_FILE)
felix_envs.append("FELIX_ETCDCERTFILE=%s" % ETCD_CERT_NODE_FILE)
if runtime == 'docker':
_start_node_container_docker(ip, ip6, log_dir, node_image, detach, etcd_envs,
felix_envs, etcd_volumes, etcd_binds)
if libnetwork_image:
_start_libnetwork_container(libnetwork_image, etcd_envs,
etcd_volumes, etcd_binds)
if runtime == 'rkt':
_start_node_container_rkt(ip, ip6, node_image, etcd_envs, felix_envs,
etcd_volumes, etcd_binds)
def node_start(node_image, runtime, log_dir, ip, ip6, as_num, detach,
libnetwork_image):
"""
Create the calico-node container and establish Calico networking on this
host.
:param ip: The IPv4 address of the host.
:param node_image: The calico-node image to use.
:param ip6: The IPv6 address of the host (or None if not configured)
:param as_num: The BGP AS Number to use for this node. If not specified
the global default value will be used.
:param detach: True to run in Docker's "detached" mode, False to run
attached.
:param libnetwork_image: The name of the Calico libnetwork driver image to
use. None, if not using libnetwork.
:return: None.
"""
# Normally, Felix will load the modules it needs, but when running inside a
# container it might not be able to do so. Ensure the required modules are
# loaded each time the node starts.
# We only make a best effort attempt because the command may fail if the
# modules are built in.
# We'll warn during the check_system() if the modules are unavailable.
if not running_in_container():
try:
call(["modprobe", "-a"] + REQUIRED_MODULES)
except OSError:
pass
# We will always want to setup IP forwarding
_setup_ip_forwarding()
# Print warnings for any known system issues before continuing
if runtime == 'docker' and not running_in_container():
using_docker = True
else:
using_docker = False
(_, _, etcd_ok) = \
check_system(quit_if_error=False, libnetwork=libnetwork_image,
check_docker=using_docker,
check_modules=not running_in_container())
if not etcd_ok:
sys.exit(1)
# Ensure log directory exists
if not os.path.exists(log_dir):
os.makedirs(log_dir)
# Get IP address of host, if none was specified
if not ip:
ips = get_host_ips(exclude=[
"^docker.*", "^cbr.*", "virbr.*", "lxcbr.*", "veth.*", "cali.*",
"tunl.*"
])
try:
ip = ips.pop()
except IndexError:
print "Couldn't autodetect a management IP address. Please provide" \
" an IP by rerunning the command with the --ip=<IP_ADDRESS> flag."
sys.exit(1)
else:
print "No IP provided. Using detected IP: %s" % ip
# Verify that IPs are not already in use by another host.
error_if_bgp_ip_conflict(ip, ip6)
# Verify that the chosen IP exists on the current host
warn_if_unknown_ip(ip, ip6)
# Warn if this hostname conflicts with an existing host
warn_if_hostname_conflict(ip)
# Set up etcd
ipv4_pools = client.get_ip_pools(4)
ipv6_pools = client.get_ip_pools(6)
# Create default pools if required
if not ipv4_pools:
client.add_ip_pool(4, DEFAULT_IPV4_POOL)
if not ipv6_pools:
client.add_ip_pool(6, DEFAULT_IPV6_POOL)
client.ensure_global_config()
client.create_host(hostname, ip, ip6, as_num)
# If IPIP is enabled, the host requires an IP address for its tunnel
# device, which is in an IPIP pool. Without this, a host can't originate
# traffic to a pool address because the response traffic would not be
# routed via the tunnel (likely being dropped by RPF checks in the fabric).
ipv4_pools = client.get_ip_pools(4)
ipip_pools = [p for p in ipv4_pools if p.ipip]
if ipip_pools:
# IPIP is enabled, make sure the host has an address for its tunnel.
_ensure_host_tunnel_addr(ipv4_pools, ipip_pools)
else:
# No IPIP pools, clean up any old address.
_remove_host_tunnel_addr()
# The format of the authority string has already been validated.
etcd_authority = os.getenv(ETCD_AUTHORITY_ENV, ETCD_AUTHORITY_DEFAULT)
# Get etcd SSL environment variables if they exist
etcd_scheme = os.getenv(ETCD_SCHEME_ENV, ETCD_SCHEME_DEFAULT)
etcd_key_file = os.getenv(ETCD_KEY_FILE_ENV, None)
etcd_cert_file = os.getenv(ETCD_CERT_FILE_ENV, None)
etcd_ca_cert_file = os.getenv(ETCD_CA_CERT_FILE_ENV, None)
etcd_volumes = []
etcd_binds = {}
etcd_envs = [
"ETCD_AUTHORITY=%s" % etcd_authority,
"ETCD_SCHEME=%s" % etcd_scheme
]
felix_envs = [
"FELIX_ETCDADDR=%s" % etcd_authority,
"FELIX_ETCDSCHEME=%s" % etcd_scheme
]
if etcd_ca_cert_file and etcd_key_file and etcd_cert_file:
etcd_volumes.append(ETCD_CA_CERT_NODE_FILE)
etcd_binds[etcd_ca_cert_file] = {
"bind": ETCD_CA_CERT_NODE_FILE,
"ro": True
}
etcd_envs.append("ETCD_CA_CERT_FILE=%s" % ETCD_CA_CERT_NODE_FILE)
felix_envs.append("FELIX_ETCDCAFILE=%s" % ETCD_CA_CERT_NODE_FILE)
etcd_volumes.append(ETCD_KEY_NODE_FILE)
etcd_binds[etcd_key_file] = {"bind": ETCD_KEY_NODE_FILE, "ro": True}
etcd_envs.append("ETCD_KEY_FILE=%s" % ETCD_KEY_NODE_FILE)
felix_envs.append("FELIX_ETCDKEYFILE=%s" % ETCD_KEY_NODE_FILE)
etcd_volumes.append(ETCD_CERT_NODE_FILE)
etcd_binds[etcd_cert_file] = {"bind": ETCD_CERT_NODE_FILE, "ro": True}
etcd_envs.append("ETCD_CERT_FILE=%s" % ETCD_CERT_NODE_FILE)
felix_envs.append("FELIX_ETCDCERTFILE=%s" % ETCD_CERT_NODE_FILE)
if runtime == 'docker':
_start_node_container_docker(ip, ip6, log_dir, node_image, detach,
etcd_envs, felix_envs, etcd_volumes,
etcd_binds)
if libnetwork_image:
_start_libnetwork_container(libnetwork_image, etcd_envs,
etcd_volumes, etcd_binds)
if runtime == 'rkt':
_start_node_container_rkt(ip, ip6, node_image, etcd_envs, felix_envs,
etcd_volumes, etcd_binds)
def node_start(node_image, log_dir, ip, ip6, as_num, detach, kubernetes,
libnetwork):
"""
Create the calico-node container and establish Calico networking on this
host.
:param ip: The IPv4 address of the host.
:param node_image: The calico-node image to use.
:param ip6: The IPv6 address of the host (or None if not configured)
:param as_num: The BGP AS Number to use for this node. If not specified
the global default value will be used.
:param detach: True to run in Docker's "detached" mode, False to run
attached.
:param kubernetes: True to install the kubernetes plugin, False otherwise.
:param libnetwork: True to use the calico/node-libnetwork image as the node
image, False otherwise.
:return: None.
"""
# Print warnings for any known system issues before continuing
check_system(fix=False, quit_if_error=False)
# Ensure log directory exists
if not os.path.exists(log_dir):
os.makedirs(log_dir)
# Get IP address of host, if none was specified
if not ip:
ips = get_host_ips(exclude=["^docker.*", "^cbr.*"])
try:
ip = ips.pop()
except IndexError:
print "Couldn't autodetect a management IP address. Please provide" \
" an IP by rerunning the command with the --ip=<IP_ADDRESS> flag."
sys.exit(1)
else:
print "No IP provided. Using detected IP: %s" % ip
# Verify that the chosen IP exists on the current host
warn_if_unknown_ip(ip, ip6)
# Warn if this hostname conflicts with an existing host
warn_if_hostname_conflict(ip)
# Install kubernetes plugin
if kubernetes:
try:
# Attempt to install to the default kubernetes directory
install_kubernetes(KUBERNETES_PLUGIN_DIR)
except OSError:
# Use the backup directory
install_kubernetes(KUBERNETES_PLUGIN_DIR_BACKUP)
# Set up etcd
ipv4_pools = client.get_ip_pools(4)
ipv6_pools = client.get_ip_pools(6)
# Create default pools if required
if not ipv4_pools:
client.add_ip_pool(4, DEFAULT_IPV4_POOL)
if not ipv6_pools:
client.add_ip_pool(6, DEFAULT_IPV6_POOL)
client.ensure_global_config()
client.create_host(hostname, ip, ip6, as_num)
try:
docker_client.remove_container("calico-node", force=True)
except docker.errors.APIError as err:
if err.response.status_code != 404:
raise
# Always try to convert the address(hostname) to an IP. This is a noop if
# the address is already an IP address. Note that the format of the authority
# string has already been validated.
etcd_authority = os.getenv(ETCD_AUTHORITY_ENV, ETCD_AUTHORITY_DEFAULT)
etcd_authority_address, etcd_authority_port = etcd_authority.split(':')
etcd_authority = '%s:%s' % (socket.gethostbyname(etcd_authority_address),
etcd_authority_port)
environment = [
"HOSTNAME=%s" % hostname,
"IP=%s" % ip,
"IP6=%s" % (ip6 or ""),
"ETCD_AUTHORITY=%s" % etcd_authority, # etcd host:port
"FELIX_ETCDADDR=%s" % etcd_authority, # etcd host:port
"POLICY_ONLY_CALICO=%s" % os.getenv(POLICY_ONLY_ENV, ""),
]
binds = {
"/proc":
{
"bind": "/proc_host",
"ro": False
},
log_dir:
{
"bind": "/var/log/calico",
"ro": False
},
"/run/docker/plugins":
{
"bind": "/usr/share/docker/plugins",
"ro": False
}
}
host_config = docker.utils.create_host_config(
privileged=True,
restart_policy={"Name": "Always"},
network_mode="host",
binds=binds)
if not node_image:
# Use the calico/node-libnetwork image if the libnetwork flag was
# passed in. Otherwise, use the default calico/node image.
node_image = LIBNETWORK_IMAGE if libnetwork else CALICO_DEFAULT_IMAGE
_find_or_pull_node_image(node_image)
container = docker_client.create_container(
node_image,
name="calico-node",
detach=True,
environment=environment,
host_config=host_config,
volumes=["/proc_host",
"/var/log/calico",
"/usr/share/docker/plugins"])
cid = container["Id"]
docker_client.start(container)
print "Calico node is running with id: %s" % cid
if not detach:
_attach_and_stream(container)
def node_start(node_image, log_dir, ip, ip6, as_num, detach, kubernetes, rkt,
libnetwork_image):
"""
Create the calico-node container and establish Calico networking on this
host.
:param ip: The IPv4 address of the host.
:param node_image: The calico-node image to use.
:param ip6: The IPv6 address of the host (or None if not configured)
:param as_num: The BGP AS Number to use for this node. If not specified
the global default value will be used.
:param detach: True to run in Docker's "detached" mode, False to run
attached.
:param kubernetes: True to install the kubernetes plugin, False otherwise.
:param rkt: True to install the rkt plugin, False otherwise.
:param libnetwork_image: The name of the Calico libnetwork driver image to
use. None, if not using libnetwork.
:return: None.
"""
# Print warnings for any known system issues before continuing
check_system(fix=False, quit_if_error=False)
# Ensure log directory exists
if not os.path.exists(log_dir):
os.makedirs(log_dir)
# Get IP address of host, if none was specified
if not ip:
ips = get_host_ips(exclude=["^docker.*", "^cbr.*"])
try:
ip = ips.pop()
except IndexError:
print "Couldn't autodetect a management IP address. Please provide" \
" an IP by rerunning the command with the --ip=<IP_ADDRESS> flag."
sys.exit(1)
else:
print "No IP provided. Using detected IP: %s" % ip
# Verify that the chosen IP exists on the current host
warn_if_unknown_ip(ip, ip6)
# Warn if this hostname conflicts with an existing host
warn_if_hostname_conflict(ip)
# Install kubernetes plugin
if kubernetes:
try:
# Attempt to install to the default kubernetes directory
install_plugin(KUBERNETES_PLUGIN_DIR, KUBERNETES_BINARY_URL)
except OSError:
# Use the backup directory
install_plugin(KUBERNETES_PLUGIN_DIR_BACKUP, KUBERNETES_BINARY_URL)
# Install rkt plugin
if rkt:
try:
# Attempt to install to the default rkt directory
install_plugin(RKT_PLUGIN_DIR, RKT_BINARY_URL)
except OSError:
# Use the backup directory
install_plugin(RKT_PLUGIN_DIR_BACKUP, RKT_BINARY_URL)
# Set up etcd
ipv4_pools = client.get_ip_pools(4)
ipv6_pools = client.get_ip_pools(6)
# Create default pools if required
if not ipv4_pools:
client.add_ip_pool(4, DEFAULT_IPV4_POOL)
if not ipv6_pools:
client.add_ip_pool(6, DEFAULT_IPV6_POOL)
client.ensure_global_config()
client.create_host(hostname, ip, ip6, as_num)
# Always try to convert the address(hostname) to an IP. This is a noop if
# the address is already an IP address. Note that the format of the authority
# string has already been validated.
etcd_authority = os.getenv(ETCD_AUTHORITY_ENV, ETCD_AUTHORITY_DEFAULT)
etcd_authority_address, etcd_authority_port = etcd_authority.split(':')
etcd_authority = '%s:%s' % (socket.gethostbyname(etcd_authority_address),
etcd_authority_port)
_start_node_container(ip, ip6, etcd_authority, log_dir, node_image, detach)
if libnetwork_image:
_start_libnetwork_container(etcd_authority, libnetwork_image)