def _heartbeat_loop(gw: 'VoiceGateway', heartbeat_interval: float):
"""
Heartbeat looper that loops and sends heartbeats to the gateway.
:param gw: The gateway to handle.
"""
# async threads!
logger.debug("Sending initial heartbeat.")
AWAIT(gw.send_heartbeat())
while True:
# this is similar to the normal threaded event waiter
# it will time out after heartbeat_interval seconds.
try:
AWAIT(
curio.timeout_after(heartbeat_interval,
gw._stop_heartbeating.wait()))
except curio.TaskTimeout:
pass
else:
break
try:
AWAIT(gw.send_heartbeat())
except ReconnectWebsocket:
break
def readinto(self, memory):
with memoryview(memory).cast('B') as view:
remaining = len(view)
total_read = 0
# It's possible that there is data already buffered on this stream.
# If so, we have to copy into the memory buffer first.
buffered = len(self._buffer)
tocopy = remaining if (remaining < buffered) else buffered
if tocopy:
view[:tocopy] = self._buffer[:tocopy]
del self._buffer[:tocopy]
remaining -= tocopy
total_read += tocopy
# To emulate behavior of synchronous readinto(), we read all available
# bytes up to the buffer size.
while remaining > 0:
try:
nrecv = self._readinto_impl(view[total_read:total_read +
remaining])
# On proper file objects, None might be returned to indicate blocking
if nrecv is None:
AWAIT(_read_wait, self._fileno)
elif nrecv == 0:
break
else:
total_read += nrecv
remaining -= nrecv
except WantRead:
AWAIT(_read_wait, self._fileno)
except WantWrite:
AWAIT(_write_wait, self._fileno)
return total_read
def recv(self, maxsize, flags=0):
while True:
try:
return self._socket_recv(maxsize, flags)
except WantRead:
AWAIT(_read_wait, self._fileno)
except WantWrite:
AWAIT(_write_wait, self._fileno)
def do_handshake(self):
while True:
try:
return self._socket.do_handshake()
except WantRead:
AWAIT(_read_wait, self._fileno)
except WantWrite:
AWAIT(_write_wait, self._fileno)
def recvfrom(self, buffersize, flags=0):
while True:
try:
return self._socket.recvfrom(buffersize, flags)
except WantRead:
AWAIT(_read_wait, self._fileno)
except WantWrite:
AWAIT(_write_wait, self._fileno)
def send(self, data, flags=0):
while True:
try:
return self._socket_send(data, flags)
except WantWrite:
AWAIT(_write_wait, self._fileno)
except WantRead:
AWAIT(_read_wait, self._fileno)
def recv_into(self, buffer, nbytes=0, flags=0):
while True:
try:
return self._socket.recv_into(buffer, nbytes, flags)
except WantRead:
AWAIT(_read_wait, self._fileno)
except WantWrite:
AWAIT(_write_wait, self._fileno)
def task():
task1 = AWAIT(spawn(add, 1, 1))
task2 = AWAIT(spawn(add, 2, 2))
task3 = AWAIT(spawn(add, 3, 3))
w = TaskGroup([task1, task2, task3])
with w:
for task in w:
result = AWAIT(task.join())
results.append(result)
def _read(self, maxbytes=-1):
while True:
try:
data = self._socket_recv(
maxbytes if maxbytes > 0 else MAX_READ)
return data
except WantRead:
AWAIT(_read_wait, self._fileno)
except WantWrite:
AWAIT(_write_wait, self._fileno)
def flush(self):
if not self._file:
return
while True:
try:
return self._file.flush()
except WantWrite:
AWAIT(_write_wait, self._fileno)
except WantRead:
AWAIT(_read_wait, self._fileno)
def func():
with disable_cancellation():
AWAIT(sleep(1))
assert True
with enable_cancellation():
AWAIT(sleep(2))
assert isinstance(AWAIT(check_cancellation()), TaskTimeout)
with pytest.raises(TaskTimeout):
AWAIT(sleep(2))
def sendto(self, bytes, flags_or_address, address=None):
if address:
flags = flags_or_address
else:
address = flags_or_address
flags = 0
while True:
try:
return self._socket.sendto(bytes, flags, address)
except WantWrite:
AWAIT(_write_wait, self._fileno)
except WantRead:
AWAIT(_read_wait, self._fileno)
def _read(self, maxbytes=-1):
while True:
# In non-blocking mode, a file-like object might return None if no data is
# available. Alternatively, we'll catch the usual blocking exceptions just to be safe
try:
data = self._file_read(maxbytes)
if data is None:
AWAIT(_read_wait, self._fileno)
else:
return data
except WantRead:
AWAIT(_read_wait, self._fileno)
except WantWrite:
AWAIT(_write_wait, self._fileno)
def sendall(self, data, flags=0):
with memoryview(data).cast('B') as buffer:
total_sent = 0
try:
while buffer:
try:
nsent = self._socket_send(buffer, flags)
total_sent += nsent
buffer = buffer[nsent:]
except WantWrite:
AWAIT(_write_wait, self._fileno)
except WantRead:
AWAIT(_read_wait, self._fileno)
except curio.errors.CancelledError as e:
e.bytes_sent = total_sent
raise
def test_errors(kernel):
# spawn_thread used on a coroutine
async def main():
with pytest.raises(TypeError):
t = await spawn_thread(simple_coro, 2, 3)
kernel.run(main)
# AWAIT used on coroutine outside of async-thread
with pytest.raises(AsyncOnlyError):
AWAIT(simple_coro(2,3))
# Premature result
async def f():
t = await spawn_thread(simple_func, 2, 3)
assert t.state != 'TERMINATED'
with pytest.raises(RuntimeError):
r = t.result
with pytest.raises(RuntimeError):
e = t.exception
kernel.run(f)
# Launching a thread with no target
async def g():
from curio.thread import AsyncThread
t = AsyncThread()
with pytest.raises(RuntimeError):
await t.start()
kernel.run(g)
def write(self, data):
nwritten = 0
view = memoryview(data).cast('B')
try:
while view:
try:
nbytes = self._socket_send(view)
nwritten += nbytes
view = view[nbytes:]
except WantWrite:
AWAIT(_write_wait, self._fileno)
except WantRead:
AWAIT(_read_wait, self._fileno)
return nwritten
except curio.errors.CancelledError as e:
e.bytes_written = nwritten
raise
def TAWAIT(coro, *args, **kwargs):
'''
Ensure that the caller is an async thread (promoting if necessary),
then await for a coroutine
'''
if not is_async_thread():
enable_async()
return AWAIT(coro, *args, **kwargs)
def accept(self):
while True:
try:
client, addr = self._socket.accept()
client = Socket(client)
client.__class__ = type(self)
return client, addr
except WantRead:
AWAIT(_read_wait, self._fileno)
async def run_in_main(func_, *args, **kwargs):
"""
Run and return `func_(*args, **kwargs)` in the kernel's thread.
Note that this should only be restricted to tkinter calls.
"""
# Note: the argument is `func_` to prevent name clashes in `kwargs`.
# This can become a positional only parameter (introduced in Python
# 3.8) once curio deprecates its usage in Python 3.6 and 3.7.
async with spawn_thread():
return AWAIT(_call(func_, args, kwargs))
def connect(self, address):
try:
result = self._socket.connect(address)
if getattr(self, 'do_handshake_on_connect', False):
self.do_handshake()
return result
except WantWrite:
AWAIT(_write_wait, self._fileno)
err = self._socket.getsockopt(SOL_SOCKET, SO_ERROR)
if err != 0:
raise OSError(err, 'Connect call failed %s' % (address, ))
if getattr(self, 'do_handshake_on_connect', False):
self.do_handshake()
def write(self, data):
nwritten = 0
view = memoryview(data).cast('B')
try:
while view:
try:
nbytes = self._file_write(view)
if nbytes is None:
raise BlockingIOError()
nwritten += nbytes
view = view[nbytes:]
except WantWrite as e:
if hasattr(e, 'characters_written'):
nwritten += e.characters_written
view = view[e.characters_written:]
AWAIT(_write_wait, self._fileno)
except WantRead:
AWAIT(_read_wait, self._fileno)
return nwritten
except curio.errors.CancelledError as e:
e.bytes_written = nwritten
raise
def close(self,
code: int = 1000,
reason: str = "Client disconnect",
reconnect: bool = False):
"""
Cancels and closes this websocket.
"""
# if reconnecting, don't close this as this will kill the websocket prematurely
if not reconnect:
self._cancelled.set()
AWAIT(self._task.cancel(
blocking=False)) # don't block because it closes by itself
self._ws.close(code=code, reason=reason)
async def test():
toplevel = await current_toplevel()
canvas = tkinter.Canvas(toplevel, highlightthickness=0)
canvas.pack(expand=True, fill="both")
task = await curio.current_task()
task.next_event = 0 # Make current task an event task
assert iseventtask(task)
x = y = None
lastx = lasty = None
try:
async for i, event in aenumerate(aevents()):
if str(event.type) in {"Enter", "Motion"}:
x, y = event.x, event.y
if lastx is None:
lastx, lasty = x, y
canvas.create_line(lastx, lasty, x, y, width=5)
canvas.create_oval(x - 2, y - 2, x + 2, y + 2, fill="black")
lastx, lasty = x, y
except CloseWindow:
pass
if False: # Toggle this to try out `run_in_main`'s power
async with curio.spawn_thread():
try:
print("not in main thread")
print(toplevel.winfo_exists())
except RuntimeError as e:
print(repr(e))
AWAIT(
run_in_main(lambda: (
print("in main thread"),
print(toplevel.winfo_exists()),
)))
# Note that `CloseWindow` exceptions don't pop up here
await curio.sleep(5)
def func():
with pytest.raises(TaskCancelled):
result = AWAIT(simple_coro(2, 3))
def coro():
with pytest.raises(TypeError):
result = AWAIT(simple_coro(2, '3'))
def coro():
result = AWAIT(simple_coro(2, 3))
return result
def func2():
results.append('func2')
# Awaiting on an async-thread function should work, but it should stay in the same thread
AWAIT(func1, threading.currentThread())
async def worker2():
async with spawn_thread():
AWAIT(evt.wait)
results.append('worker2')
def worker1():
AWAIT(evt.wait)
results.append('worker1')
async def func(x, y):
async with spawn_thread():
time.sleep(0.5)
results.append(AWAIT(simple_coro(x, y)))
