def __init__(self, burnin, enable_eth_tests, enable_modem_test=0, **kw):
self._burnin = burnin
self._preflight_done = 0
# DO NOT CHANGE THE ORDER OF THESE THREE ITEMS! Thank you!
self._config = TestConfig(burnin, '/etc/hw_test.conf')
self._hw_info = HardwareInfo()
self._logger = TestLogger(burnin, self._hw_info.serialno())
self._bootlog_tester = None
self._car_tester = None
self._dallas_tester = None
self._eth_tester = None
self._i2c_tester = None
self._mem_tester = None
self._stressmemtester = None
self._modem_tester = None
self._serial_tester = None
self._usb_tester = None
self._enabled_tests = 0
model = self._hw_info.model()
if kw.get('bootlog', True):
self._bootlog_tester = BootlogTester(
self._config, self._hw_info, self._logger
)
self._enabled_tests += 1
if kw.get('ram', True):
self._mem_tester = MemoryTester(
self._config, self._hw_info, self._logger
)
self._enabled_tests += 1
# do not perform stress test unless called for explicitly.
if kw.get('ramstress', False):
self._stressmemtester = MemoryTester(
self._config, self._hw_info, self._logger, True
)
self._enabled_tests += 1
if enable_eth_tests and kw.get('ethernet', True):
self._eth_tester = NetworkTester(
self._config, self._hw_info, self._logger
)
self._enabled_tests += 1
if not model in ('TSWS', 'PC', 'Unknown', ''):
self._avr_copro = avr()
if kw.get('serial', True):
self._serial_tester = SerialTester(
self._config, self._hw_info, self._logger
)
self._enabled_tests += 1
if model in ('1200', '2400', '1500', '2500'):
if kw.get('relayscounters', True):
self._car_tester = CountersAndRelaysTester(
self._config, self._hw_info, self._logger, self._avr_copro
)
self._enabled_tests += 1
if kw.get('dallas', True):
self._dallas_tester = DallasTester(
self._config, self._hw_info, self._logger, self._avr_copro
)
self._enabled_tests += 1
if model in ('1500', '2500') and kw.get('i2c', True):
self._i2c_tester = I2CTester(
self._config, self._hw_info, self._logger
)
self._enabled_tests += 1
if self._hw_info.model() in ('2400', '2500') and kw.get('usb', True):
self._usb_tester = USBTester(self._config, self._hw_info, self._logger)
self._enabled_tests += 1
return
def __init__(self, burnin, enable_eth_tests, enable_modem_test=0, **kw):
self._burnin = burnin
self._preflight_done = 0
# DO NOT CHANGE THE ORDER OF THESE THREE ITEMS! Thank you!
self._config = TestConfig(burnin, '/etc/hw_test.conf')
self._hw_info = HardwareInfo()
self._logger = TestLogger(burnin, self._hw_info.serialno())
self._bootlog_tester = None
self._car_tester = None
self._dallas_tester = None
self._eth_tester = None
self._i2c_tester = None
self._mem_tester = None
self._stressmemtester = None
self._modem_tester = None
self._serial_tester = None
self._usb_tester = None
self._enabled_tests = 0
model = self._hw_info.model()
if kw.get('bootlog', True):
self._bootlog_tester = BootlogTester(self._config, self._hw_info,
self._logger)
self._enabled_tests += 1
if kw.get('ram', True):
self._mem_tester = MemoryTester(self._config, self._hw_info,
self._logger)
self._enabled_tests += 1
# do not perform stress test unless called for explicitly.
if kw.get('ramstress', False):
self._stressmemtester = MemoryTester(self._config, self._hw_info,
self._logger, True)
self._enabled_tests += 1
if enable_eth_tests and kw.get('ethernet', True):
self._eth_tester = NetworkTester(self._config, self._hw_info,
self._logger)
self._enabled_tests += 1
if not model in ('TSWS', 'PC', 'Unknown', ''):
self._avr_copro = avr()
if kw.get('serial', True):
self._serial_tester = SerialTester(self._config, self._hw_info,
self._logger)
self._enabled_tests += 1
if model in ('1200', '2400', '1500', '2500'):
if kw.get('relayscounters', True):
self._car_tester = CountersAndRelaysTester(
self._config, self._hw_info, self._logger, self._avr_copro)
self._enabled_tests += 1
if kw.get('dallas', True):
self._dallas_tester = DallasTester(self._config, self._hw_info,
self._logger,
self._avr_copro)
self._enabled_tests += 1
if model in ('1500', '2500') and kw.get('i2c', True):
self._i2c_tester = I2CTester(self._config, self._hw_info,
self._logger)
self._enabled_tests += 1
if self._hw_info.model() in ('2400', '2500') and kw.get('usb', True):
self._usb_tester = USBTester(self._config, self._hw_info,
self._logger)
self._enabled_tests += 1
return
class TesterFramework(object):
def __init__(self, burnin, enable_eth_tests, enable_modem_test=0, **kw):
self._burnin = burnin
self._preflight_done = 0
# DO NOT CHANGE THE ORDER OF THESE THREE ITEMS! Thank you!
self._config = TestConfig(burnin, '/etc/hw_test.conf')
self._hw_info = HardwareInfo()
self._logger = TestLogger(burnin, self._hw_info.serialno())
self._bootlog_tester = None
self._car_tester = None
self._dallas_tester = None
self._eth_tester = None
self._i2c_tester = None
self._mem_tester = None
self._stressmemtester = None
self._modem_tester = None
self._serial_tester = None
self._usb_tester = None
self._enabled_tests = 0
model = self._hw_info.model()
if kw.get('bootlog', True):
self._bootlog_tester = BootlogTester(
self._config, self._hw_info, self._logger
)
self._enabled_tests += 1
if kw.get('ram', True):
self._mem_tester = MemoryTester(
self._config, self._hw_info, self._logger
)
self._enabled_tests += 1
# do not perform stress test unless called for explicitly.
if kw.get('ramstress', False):
self._stressmemtester = MemoryTester(
self._config, self._hw_info, self._logger, True
)
self._enabled_tests += 1
if enable_eth_tests and kw.get('ethernet', True):
self._eth_tester = NetworkTester(
self._config, self._hw_info, self._logger
)
self._enabled_tests += 1
if not model in ('TSWS', 'PC', 'Unknown', ''):
self._avr_copro = avr()
if kw.get('serial', True):
self._serial_tester = SerialTester(
self._config, self._hw_info, self._logger
)
self._enabled_tests += 1
if model in ('1200', '2400', '1500', '2500'):
if kw.get('relayscounters', True):
self._car_tester = CountersAndRelaysTester(
self._config, self._hw_info, self._logger, self._avr_copro
)
self._enabled_tests += 1
if kw.get('dallas', True):
self._dallas_tester = DallasTester(
self._config, self._hw_info, self._logger, self._avr_copro
)
self._enabled_tests += 1
if model in ('1500', '2500') and kw.get('i2c', True):
self._i2c_tester = I2CTester(
self._config, self._hw_info, self._logger
)
self._enabled_tests += 1
if self._hw_info.model() in ('2400', '2500') and kw.get('usb', True):
self._usb_tester = USBTester(self._config, self._hw_info, self._logger)
self._enabled_tests += 1
return
###
# Do a single pass test over all tests except the boot log.
#
# XXX: iteration is unused for now, just a placeholder.
def _core_test(self, iteration):
if not self._preflight_done:
raise Exception("Pre-test checkout has not been done, aborting.\n")
if self._car_tester:
self._car_tester.runtest(self._burnin)
if self._dallas_tester:
self._dallas_tester.runtest(self._burnin)
if self._eth_tester:
self._eth_tester.runtest(1) # burnin set to 1 to avoid netperf tests
if self._i2c_tester:
self._i2c_tester.runtest(self._burnin)
if self._mem_tester:
self._mem_tester.runtest(self._burnin)
if self._stressmemtester:
self._stressmemtester.runtest(self._burnin)
if self._modem_tester:
self._modem_tester.runtest(self._burnin)
if self._serial_tester:
self._serial_tester.runtest(self._burnin)
if self._usb_tester:
self._usb_tester.runtest(self._burnin)
return
###
# Make sure that we have a valid serial number, and:
# - If in burn-in mode we don't have one, do not test.
# - If in production mode, get this info using a barcode scanner
# and program the serial number and mac address(es).
def preflight_check(self):
if self._preflight_done:
return 1
serialRE = re.compile("\d{2}-\d{5}", re.IGNORECASE)
result = serialRE.search(self._hw_info.serialno())
if result:
self._preflight_done = 1
return 1
message('This unit needs a serial number and MAC address(es).')
if self._burnin:
message('Burn-in tests cannot be done on brand-new units.')
return 0
msg_testing('One moment while a connection is made to the HW test server...')
m_address = self._config.def_macaddr()
self._hw_info.set_mac_addr(0, m_address)
os.system('ifconfig eth0 down')
#os.system('rmmod natsemi; sleep 1; insmod -q natsemi')
if_mac_addr = '%s:%s:%s:%s:%s:%s' % \
(m_address[0:2], m_address[2:4], m_address[4:6], m_address[6:8],
m_address[8:10], m_address[10:])
os.system('ifconfig eth0 hw ether %s' % if_mac_addr)
os.system('ifconfig eth0 %s up' % self._config.def_ipaddr())
s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
try:
s.connect((self._config.hwtest_server(), self._config.hwtest_port()))
except:
msg_fail()
return 0
message('done.\nYou may now scan the barcode on this unit.')
# Send a hello message and then go into a wait.
s.send('GreetZ_1138')
data = s.recv(64)
s.close()
serial, mac0, mac1 = data.split(":")
# Any of the following set_xxx calls will raise an exception on failure.
msg_testing('Programming the serial number and MAC address(es) for this unit...')
self._hw_info.set_serialno(serial)
self._hw_info.set_mac_addr(0, mac0)
if not mac1 == "":
self._hw_info.set_mac_addr(1, mac1)
message('done.')
msg_testing('Restarting networking...')
self._hw_info.restart_networking()
self._hw_info.reload_values()
message('done.')
self._preflight_done = 1
return 1
def print_prerun_summary(self):
if self._enabled_tests <= 1:
return
self._logger.msg('Mediator hardware test program revision %s.\n', hwtest_version())
self._logger.msg('Copyright (C) 2009 Cisco Systems, Inc. All rights reserved.\n\n')
self._logger.msg('Test executed on %s\n' % os.popen('date').readline())
self._logger.msg('Model number: %s\n' % self._hw_info.model())
self._logger.msg('Framework version: %s\n' % properties.COMPOUND_VERSION)
self._logger.msg('MOE version: %s\n' % properties.MOE_VERSION)
self._logger.msg('Serial number: %s\n' % self._hw_info.serialno())
self._logger.msg('eth0 MAC address: %s\n' % self._hw_info.mac_addr(0))
if self._hw_info.model() in ('TSWS', '2400', '2500'):
self._logger.msg('eth1 MAC address: %s\n' % self._hw_info.mac_addr(1))
###
# Having a list of loaded modules will be extremely helpful in the
# event a test should fail (because the module might not have loaded).
self._logger.msg('Loaded kernel modules:\n')
result, spewage = execute_command('/sbin/lsmod')
if not result:
raise Exception('Cannot get module info, aborting test.')
for line in spewage:
self._logger.msg(line)
self._logger.msg('\n')
return
def tests_in_error(self):
errs = 0
if self._bootlog_tester:
errs += self._bootlog_tester.nissues()
if self._car_tester:
errs += self._car_tester.nissues()
if self._dallas_tester:
errs += self._dallas_tester.nissues()
if self._eth_tester:
errs += self._eth_tester.nissues()
if self._i2c_tester:
errs += self._i2c_tester.nissues()
if self._mem_tester:
errs += self._mem_tester.nissues()
if self._modem_tester:
errs += self._modem_tester.nissues()
if self._serial_tester:
errs += self._serial_tester.nissues()
if self._usb_tester:
errs += self._usb_tester.nissues()
return errs
def report_results(self):
if self._enabled_tests > 1:
self._logger.msg('Test summary for unit %s:\n' % self._hw_info.serialno())
# NOTE NOTE NOTE NOTE NOTE NOTE =---------------------------------
#
# Please report results in the order that the tests are done.
# Like muscle memory, folks can develop visual memory as well.
#
# NOTE NOTE NOTE NOTE NOTE NOTE =---------------------------------
if self._bootlog_tester:
self._bootlog_tester.print_results()
if self._car_tester:
self._car_tester.print_results()
if self._dallas_tester:
self._dallas_tester.print_results()
if self._eth_tester:
self._eth_tester.print_results()
if self._i2c_tester:
self._i2c_tester.print_results()
if self._mem_tester:
self._mem_tester.print_results()
if self._modem_tester:
self._modem_tester.print_results()
if self._serial_tester:
self._serial_tester.print_results()
if self._usb_tester:
self._usb_tester.print_results()
if self._enabled_tests > 1:
self._logger.msg("=----- END OF REPORT ------------------------------=\n\n")
###
# Examine the boot log and run all core tests once.
def runtests(self):
if not self._preflight_done:
raise Exception("Pre-test checkout has not been done, aborting.\n")
if self._bootlog_tester:
self._bootlog_tester.runtest(self._burnin)
self._core_test(1)
return
class TesterFramework(object):
def __init__(self, burnin, enable_eth_tests, enable_modem_test=0, **kw):
self._burnin = burnin
self._preflight_done = 0
# DO NOT CHANGE THE ORDER OF THESE THREE ITEMS! Thank you!
self._config = TestConfig(burnin, '/etc/hw_test.conf')
self._hw_info = HardwareInfo()
self._logger = TestLogger(burnin, self._hw_info.serialno())
self._bootlog_tester = None
self._car_tester = None
self._dallas_tester = None
self._eth_tester = None
self._i2c_tester = None
self._mem_tester = None
self._stressmemtester = None
self._modem_tester = None
self._serial_tester = None
self._usb_tester = None
self._enabled_tests = 0
model = self._hw_info.model()
if kw.get('bootlog', True):
self._bootlog_tester = BootlogTester(self._config, self._hw_info,
self._logger)
self._enabled_tests += 1
if kw.get('ram', True):
self._mem_tester = MemoryTester(self._config, self._hw_info,
self._logger)
self._enabled_tests += 1
# do not perform stress test unless called for explicitly.
if kw.get('ramstress', False):
self._stressmemtester = MemoryTester(self._config, self._hw_info,
self._logger, True)
self._enabled_tests += 1
if enable_eth_tests and kw.get('ethernet', True):
self._eth_tester = NetworkTester(self._config, self._hw_info,
self._logger)
self._enabled_tests += 1
if not model in ('TSWS', 'PC', 'Unknown', ''):
self._avr_copro = avr()
if kw.get('serial', True):
self._serial_tester = SerialTester(self._config, self._hw_info,
self._logger)
self._enabled_tests += 1
if model in ('1200', '2400', '1500', '2500'):
if kw.get('relayscounters', True):
self._car_tester = CountersAndRelaysTester(
self._config, self._hw_info, self._logger, self._avr_copro)
self._enabled_tests += 1
if kw.get('dallas', True):
self._dallas_tester = DallasTester(self._config, self._hw_info,
self._logger,
self._avr_copro)
self._enabled_tests += 1
if model in ('1500', '2500') and kw.get('i2c', True):
self._i2c_tester = I2CTester(self._config, self._hw_info,
self._logger)
self._enabled_tests += 1
if self._hw_info.model() in ('2400', '2500') and kw.get('usb', True):
self._usb_tester = USBTester(self._config, self._hw_info,
self._logger)
self._enabled_tests += 1
return
###
# Do a single pass test over all tests except the boot log.
#
# XXX: iteration is unused for now, just a placeholder.
def _core_test(self, iteration):
if not self._preflight_done:
raise Exception("Pre-test checkout has not been done, aborting.\n")
if self._car_tester:
self._car_tester.runtest(self._burnin)
if self._dallas_tester:
self._dallas_tester.runtest(self._burnin)
if self._eth_tester:
self._eth_tester.runtest(
1) # burnin set to 1 to avoid netperf tests
if self._i2c_tester:
self._i2c_tester.runtest(self._burnin)
if self._mem_tester:
self._mem_tester.runtest(self._burnin)
if self._stressmemtester:
self._stressmemtester.runtest(self._burnin)
if self._modem_tester:
self._modem_tester.runtest(self._burnin)
if self._serial_tester:
self._serial_tester.runtest(self._burnin)
if self._usb_tester:
self._usb_tester.runtest(self._burnin)
return
###
# Make sure that we have a valid serial number, and:
# - If in burn-in mode we don't have one, do not test.
# - If in production mode, get this info using a barcode scanner
# and program the serial number and mac address(es).
def preflight_check(self):
if self._preflight_done:
return 1
serialRE = re.compile("\d{2}-\d{5}", re.IGNORECASE)
result = serialRE.search(self._hw_info.serialno())
if result:
self._preflight_done = 1
return 1
message('This unit needs a serial number and MAC address(es).')
if self._burnin:
message('Burn-in tests cannot be done on brand-new units.')
return 0
msg_testing(
'One moment while a connection is made to the HW test server...')
m_address = self._config.def_macaddr()
self._hw_info.set_mac_addr(0, m_address)
os.system('ifconfig eth0 down')
#os.system('rmmod natsemi; sleep 1; insmod -q natsemi')
if_mac_addr = '%s:%s:%s:%s:%s:%s' % \
(m_address[0:2], m_address[2:4], m_address[4:6], m_address[6:8],
m_address[8:10], m_address[10:])
os.system('ifconfig eth0 hw ether %s' % if_mac_addr)
os.system('ifconfig eth0 %s up' % self._config.def_ipaddr())
s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
try:
s.connect(
(self._config.hwtest_server(), self._config.hwtest_port()))
except:
msg_fail()
return 0
message('done.\nYou may now scan the barcode on this unit.')
# Send a hello message and then go into a wait.
s.send('GreetZ_1138')
data = s.recv(64)
s.close()
serial, mac0, mac1 = data.split(":")
# Any of the following set_xxx calls will raise an exception on failure.
msg_testing(
'Programming the serial number and MAC address(es) for this unit...'
)
self._hw_info.set_serialno(serial)
self._hw_info.set_mac_addr(0, mac0)
if not mac1 == "":
self._hw_info.set_mac_addr(1, mac1)
message('done.')
msg_testing('Restarting networking...')
self._hw_info.restart_networking()
self._hw_info.reload_values()
message('done.')
self._preflight_done = 1
return 1
def print_prerun_summary(self):
if self._enabled_tests <= 1:
return
self._logger.msg('Mediator hardware test program revision %s.\n',
hwtest_version())
self._logger.msg(
'Copyright (C) 2009 Cisco Systems, Inc. All rights reserved.\n\n')
self._logger.msg('Test executed on %s\n' % os.popen('date').readline())
self._logger.msg('Model number: %s\n' % self._hw_info.model())
self._logger.msg('Framework version: %s\n' %
properties.COMPOUND_VERSION)
self._logger.msg('MOE version: %s\n' % properties.MOE_VERSION)
self._logger.msg('Serial number: %s\n' % self._hw_info.serialno())
self._logger.msg('eth0 MAC address: %s\n' % self._hw_info.mac_addr(0))
if self._hw_info.model() in ('TSWS', '2400', '2500'):
self._logger.msg('eth1 MAC address: %s\n' %
self._hw_info.mac_addr(1))
###
# Having a list of loaded modules will be extremely helpful in the
# event a test should fail (because the module might not have loaded).
self._logger.msg('Loaded kernel modules:\n')
result, spewage = execute_command('/sbin/lsmod')
if not result:
raise Exception('Cannot get module info, aborting test.')
for line in spewage:
self._logger.msg(line)
self._logger.msg('\n')
return
def tests_in_error(self):
errs = 0
if self._bootlog_tester:
errs += self._bootlog_tester.nissues()
if self._car_tester:
errs += self._car_tester.nissues()
if self._dallas_tester:
errs += self._dallas_tester.nissues()
if self._eth_tester:
errs += self._eth_tester.nissues()
if self._i2c_tester:
errs += self._i2c_tester.nissues()
if self._mem_tester:
errs += self._mem_tester.nissues()
if self._modem_tester:
errs += self._modem_tester.nissues()
if self._serial_tester:
errs += self._serial_tester.nissues()
if self._usb_tester:
errs += self._usb_tester.nissues()
return errs
def report_results(self):
if self._enabled_tests > 1:
self._logger.msg('Test summary for unit %s:\n' %
self._hw_info.serialno())
# NOTE NOTE NOTE NOTE NOTE NOTE =---------------------------------
#
# Please report results in the order that the tests are done.
# Like muscle memory, folks can develop visual memory as well.
#
# NOTE NOTE NOTE NOTE NOTE NOTE =---------------------------------
if self._bootlog_tester:
self._bootlog_tester.print_results()
if self._car_tester:
self._car_tester.print_results()
if self._dallas_tester:
self._dallas_tester.print_results()
if self._eth_tester:
self._eth_tester.print_results()
if self._i2c_tester:
self._i2c_tester.print_results()
if self._mem_tester:
self._mem_tester.print_results()
if self._modem_tester:
self._modem_tester.print_results()
if self._serial_tester:
self._serial_tester.print_results()
if self._usb_tester:
self._usb_tester.print_results()
if self._enabled_tests > 1:
self._logger.msg(
"=----- END OF REPORT ------------------------------=\n\n")
###
# Examine the boot log and run all core tests once.
def runtests(self):
if not self._preflight_done:
raise Exception("Pre-test checkout has not been done, aborting.\n")
if self._bootlog_tester:
self._bootlog_tester.runtest(self._burnin)
self._core_test(1)
return