def __init__(self, name, core_services, set_in=None, prop_in=None):
"""\
Initialize an XBee Wall Router instance.
Parameters:
* name - The name of the XBee Wall Router instance.
* core - The Core services instance.
* set_in - settings from a derived class
* prop_in - properties from a derived class
"""
# DeviceBase will create:
# self._name, self._core, self._tracer,
# XBeeBase will create:
# self._xbee_manager, self._extended_address
## XBeeBase manages these settings:
# xbee_device_manager: the name of an XBeeDeviceManager instance.
# extended_address: the extended address of the XBee device you
# would like to monitor.
#
## This driver maintains
# sample_rate_ms: the sample rate in msec of the XBee Wall Router.
# offset: a raw offset to add/subtract from resulting temperature
# degf: T/F if degress Fahrenheit is desired instead of Celsius
settings_list = [
Setting(
name='sample_rate_ms', type=int, required=False,
default_value=self.DEF_SAMPLE_MS,
verify_function=lambda x: x > 0 and x < 0xffff),
Setting(
name='offset', type=float, required=False,
default_value=self.DEF_OFFSET),
Setting(
name='degf', type=bool, required=False,
default_value=self.DEF_DEGF),
]
# Add our settings_list entries into the settings passed to us.
set_in = self.merge_settings(set_in, settings_list)
## Channel Properties Definition:
property_list = [
# gettable properties
ChannelSourceDeviceProperty(name="light", type=float,
initial=Sample(timestamp=0, unit="not init", value=0.0),
perms_mask=DPROP_PERM_GET, options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="temperature", type=float,
initial=Sample(timestamp=0, unit="not init", value=0.0),
perms_mask=DPROP_PERM_GET, options=DPROP_OPT_AUTOTIMESTAMP),
]
# Add our property_list entries into the properties passed to us.
prop_in = self.merge_properties(prop_in, property_list)
## Initialize the XBeeBase interface:
XBeeBase.__init__(self, name, core_services, set_in, prop_in)
self._tracer.calls("XBeeXBR.__init__()")
def __init__(self, name, core_services, set_in=None, prop_in=None):
"""\
Initialize an XBee Wall Router instance.
Parameters:
* name - The name of the XBee Wall Router instance.
* core - The Core services instance.
* set_in - settings from a derived class
* prop_in - properties from a derived class
"""
# DeviceBase will create:
# self._name, self._core, self._tracer,
# XBeeBase will create:
# self._xbee_manager, self._extended_address
## XBeeBase manages these settings:
# xbee_device_manager: the name of an XBeeDeviceManager instance.
# extended_address: the extended address of the XBee device you
# would like to monitor.
#
## This driver maintains
# sample_rate_ms: the sample rate in msec of the XBee Wall Router.
# offset: a raw offset to add/subtract from resulting temperature
# degf: T/F if degress Fahrenheit is desired instead of Celsius
settings_list = [
Setting(
name='sample_rate_ms', type=int, required=False,
default_value=self.DEF_SAMPLE_MS,
verify_function=lambda x: x > 0 and x < 0xffff),
Setting(
name='offset', type=float, required=False,
default_value=self.DEF_OFFSET),
Setting(
name='degf', type=bool, required=False,
default_value=self.DEF_DEGF),
]
# Add our settings_list entries into the settings passed to us.
set_in = self.merge_settings(set_in, settings_list)
## Channel Properties Definition:
property_list = [
# gettable properties
ChannelSourceDeviceProperty(name="light", type=float,
initial=Sample(timestamp=0, unit="not init", value=0.0),
perms_mask=DPROP_PERM_GET, options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="temperature", type=float,
initial=Sample(timestamp=0, unit="not init", value=0.0),
perms_mask=DPROP_PERM_GET, options=DPROP_OPT_AUTOTIMESTAMP),
]
# Add our property_list entries into the properties passed to us.
prop_in = self.merge_properties(prop_in, property_list)
## Initialize the XBeeBase interface:
XBeeBase.__init__(self, name, core_services, set_in, prop_in)
self._tracer.calls("XBeeXBR.__init__()")
def __init__(self, name, core_services):
self.__name = name
self.__core = core_services
self.__tracer = get_tracer(name)
self.__xbee_manager = None
## Initialize the XBeeBase interface:
XBeeBase.__init__(self, self.__name, self.__core, [], [])
def __init__(self, name, core_services, property_list):
self.__name = name
self.__core = core_services
self.__property_list = property_list
## Local State Variables:
self.__xbee_manager = None
self.sensor = None
# Settings
#
# xbee_device_manager: must be set to the name of an XBeeDeviceManager
# instance.
# extended_address: the extended address of the XBee Watchport Sensor
# device you would like to monitor.
# sleep: True/False setting which determines if we should put the
# device to sleep between samples.
# sample_rate_ms: the sample rate of the XBee adapter.
# enable_low_battery: Force an adapter to enable support for
# battery-monitor pin.
# It should be only enabled if adapter is using
# internal batteries. Optional, Off by default.
settings_list = [
Setting(
name='sleep', type=bool, required=False,
default_value=False),
Setting(
name='sample_rate_ms', type=int, required=False,
default_value=60000,
verify_function=lambda x: x >= 0 and x <= CYCLIC_SLEEP_EXT_MAX_MS),
Setting(
name='poll_clean_minutes', type=int, required=False,
default_value=0,
verify_function=self.__verify_clean_minutes),
# This setting is provided for advanced users, it is not required:
Setting(
name='awake_time_ms', type=int, required=False,
default_value=5000,
verify_function=lambda x: x >= 0 and x <= 0xffff),
Setting(
name='enable_low_battery', type=Boolean, required=False,
default_value=Boolean("Off", STYLE_ONOFF)),
]
## Channel Properties Definition:
__property_list_internal = [
]
property_list.extend(__property_list_internal)
## Initialize the XBeeBase interface:
XBeeBase.__init__(self, self.__name, self.__core,
settings_list, property_list)
def __init__(self, name, core_services, property_list):
self.__name = name
self.__core = core_services
self.__property_list = property_list
from core.tracing import get_tracer
self._tracer = get_tracer(name)
## Local State Variables:
self.__xbee_manager = None
self.sensor = None
# Settings
#
# xbee_device_manager: must be set to the name of an XBeeDeviceManager
# instance.
# extended_address: the extended address of the XBee Watchport Sensor
# device you would like to monitor.
# sleep: True/False setting which determines if we should put the
# device to sleep between samples.
# sample_rate_ms: the sample rate of the XBee adapter.
# enable_low_battery: Force an adapter to enable support for
# battery-monitor pin.
# It should be only enabled if adapter is using
# internal batteries. Optional, Off by default.
settings_list = [
Setting(
name='sleep', type=bool, required=False,
default_value=False),
Setting(
name='sample_rate_ms', type=int, required=True,
default_value=60000,
verify_function=lambda x: x >= 0 and x <= CYCLIC_SLEEP_EXT_MAX_MS),
# This setting is provided for advanced users, it is not required:
Setting(
name='awake_time_ms', type=int, required=False,
default_value=5000,
verify_function=lambda x: x >= 0 and x <= 0xffff),
Setting(
name='enable_low_battery', type=Boolean, required=False,
default_value=Boolean("Off", STYLE_ONOFF)),
]
## Channel Properties Definition:
__property_list_internal = [
]
property_list.extend(__property_list_internal)
## Initialize the XBeeBase interface:
XBeeBase.__init__(self, self.__name, self.__core,
settings_list, property_list)
def __init__(self, name, core_services):
"""\
Initialize an XBee Wall Router instance.
Parameters:
* name - The name of the XBee Wall Router instance.
* core_services - The Core services instance.
"""
self.__name = name
self.__core = core_services
## Local State Variables:
self.__xbee_manager = None
from core.tracing import get_tracer
self.__tracer = get_tracer(name)
# Settings:
#
# xbee_device_manager: must be set to the name of an XBeeDeviceManager
# instance.
# extended_address: is the extended address of the XBee device you
# would like to monitor.
# sample_rate_ms: is the sample rate of the XBee Wall Router.
settings_list = [
Setting(
name = 'xbee_device_manager', type = str, required = False,
default_value = ''),
Setting(
name = 'extended_address', type = str, required = False,
default_value = ''),
Setting(
name = 'sample_rate_ms', type = int, required = False,
default_value = 1000,
verify_function = lambda x: x > 0 and x < 0xffff),
]
## Channel Properties Definition:
property_list = [
# gettable properties
ChannelSourceDeviceProperty(name = "light", type = float,
initial = Sample(timestamp = 0, unit = "brightness", value = 0.0),
perms_mask = DPROP_PERM_GET, options = DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name = "temperature", type = float,
initial = Sample(timestamp = 0, unit = "C", value = 0.0),
perms_mask = DPROP_PERM_GET, options = DPROP_OPT_AUTOTIMESTAMP),
]
## Initialize the XBeeBase interface:
XBeeBase.__init__(self, self.__name, self.__core,
settings_list, property_list)
def __init__(self, name, core_services):
self.__name = name
self.__core = core_services
## Local State Variables:
self.__xbee_manager = None
self.offset = 520.0
self.__power_on_time = 0
## Settings Table Definition:
settings_list = [
Setting(
name='sample_rate_ms', type=int, required=False,
default_value=1000,
verify_function=lambda x: x > 0 and x < 0xffff),
Setting(
name='default_state', type=str, required=False,
default_value="on",
parser=lambda s: s.lower(),
verify_function=lambda s: s in initial_states),
Setting(
name='idle_off_seconds', type=int, required=False,
default_value=0, verify_function=lambda x: x >= 0),
Setting(name="power_on_source", type=str, required=False),
Setting(name="pf_adjustment", type=float, required=False,
default_value=1.0,
verify_function=lambda i:0 < i and i <= 1.0),
Setting(name="device_profile", type=str, required=False),
]
## Channel Properties Definition:
property_list = [
# gettable properties
ChannelSourceDeviceProperty(name="light", type=float,
initial=Sample(timestamp=0, unit="brightness", value=0.0),
perms_mask=DPROP_PERM_GET, options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="temperature", type=float,
initial=Sample(timestamp=0, unit="C", value=0.0),
perms_mask=DPROP_PERM_GET, options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="current", type=float,
initial=Sample(timestamp=0, unit="A", value=0.0),
perms_mask=DPROP_PERM_GET, options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="power_on", type=Boolean,
initial=Sample(timestamp=0,
value=Boolean(True, style=STYLE_ONOFF)),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=self.prop_set_power_control),
]
## Initialize the XBeeBase interface:
XBeeBase.__init__(self, self.__name, self.__core,
settings_list, property_list)
def __init__(self, name, core_services):
self.__name = name
self.__core = core_services
self.include_unit = "F"
self.count = 0
self.upCount = 11
## Local State Variables:
self.__xbee_manager = None
## Settings Table Definition:
settings_list = [
Setting(
name='sample_rate_ms', type=int, required=False,
default_value=60000,
verify_function=lambda x: x > 0 and x < 0xffff),
]
## Channel Properties Definition:
property_list = [
# gettable properties
ChannelSourceDeviceProperty(name="last_com", type=str,
initial=Sample(timestamp=1, unit="", value=""),
perms_mask=DPROP_PERM_GET, options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="signal", type=str,
initial=Sample(timestamp=0, unit="", value=""),
perms_mask=DPROP_PERM_GET, options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="volts", type=str,
initial=Sample(timestamp=0, unit="", value=""),
perms_mask=DPROP_PERM_GET, options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="excl", type=Boolean,
initial=Sample(timestamp=0,
value=Boolean(False, style=STYLE_ONOFF)),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=lambda x: self.exclude("excl", x)),
ChannelSourceDeviceProperty(name="incl", type=Boolean,
initial=Sample(timestamp=0,
value=Boolean(True, style=STYLE_ONOFF)),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=lambda x: self.include("incl", x)),
ChannelSourceDeviceProperty(name="light", type=float,
initial=Sample(timestamp=0, unit="brightness", value=0.0),
perms_mask=DPROP_PERM_GET, options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="temperature", type=float,
initial=Sample(timestamp=0, unit="F", value=0.0),
perms_mask=DPROP_PERM_GET, options=DPROP_OPT_AUTOTIMESTAMP),
]
## Initialize the XBeeBase interface:
XBeeBase.__init__(self, self.__name, self.__core,
settings_list, property_list)
def __init__(self, name, core_services, set_in=None, prop_in=None):
# DeviceBase will create:
# self._name, self._core, self._tracer,
# XBeeBase will create:
# self._xbee_manager, self._extended_address
## Local State Variables:
## Settings Table Definition:
settings_list = [
Setting(name='baudrate',
type=int,
required=False,
default_value=self.DEF_BAUDRATE,
verify_function=self.__verify_baudrate),
Setting(name='parity',
type=str,
required=False,
default_value=self.DEF_PARITY,
verify_function=self.__verify_parity),
# NOTE: SB/Stop-bits is not available in all XBEE
Setting(name='stopbits',
type=int,
required=False,
default_value=self.DEF_STOPBITS,
verify_function=self.__verify_stopbits),
Setting(name='hardwareflowcontrol',
type=str,
required=False,
default_value=self.DEF_HWFLOW,
verify_function=self.__verify_hwflow),
# These setting is for legacy compatibility & ignored.
# Having it here is not appropriate given this driver is commonly
# used with third party XBee products.
Setting(name='enable_low_battery',
type=Boolean,
required=False,
default_value=False),
]
# Add our settings_list entries into the settings passed to us.
set_in = self.merge_settings(set_in, settings_list)
## Channel Properties Definition:
# property_list = []
# Add our property_list entries into the properties passed to us.
# prop_in = self.merge_properties(prop_in, property_list)
## Initialize the XBeeBase interface:
XBeeBase.__init__(self, name, core_services, set_in, prop_in)
self._tracer.calls("XBeeSerial.__init__()")
def __init__(self, name, core_services, set_in=None, prop_in=None):
# DeviceBase will create:
# self._name, self._core, self._tracer,
# XBeeBase will create:
# self._xbee_manager, self._extended_address
## Local State Variables:
## Settings Table Definition:
settings_list = [
Setting(
name='baudrate', type=int, required=False,
default_value=self.DEF_BAUDRATE,
verify_function=self.__verify_baudrate),
Setting(
name='parity', type=str, required=False,
default_value=self.DEF_PARITY,
verify_function=self.__verify_parity),
# NOTE: SB/Stop-bits is not available in all XBEE
Setting(
name='stopbits', type=int, required=False,
default_value=self.DEF_STOPBITS,
verify_function=self.__verify_stopbits),
Setting(
name='hardwareflowcontrol', type=str, required=False,
default_value=self.DEF_HWFLOW,
verify_function=self.__verify_hwflow),
# These setting is for legacy compatibility & ignored.
# Having it here is not appropriate given this driver is commonly
# used with third party XBee products.
Setting(
name='enable_low_battery', type=Boolean, required=False,
default_value=False),
]
# Add our settings_list entries into the settings passed to us.
set_in = self.merge_settings(set_in, settings_list)
## Channel Properties Definition:
# property_list = []
# Add our property_list entries into the properties passed to us.
# prop_in = self.merge_properties(prop_in, property_list)
## Initialize the XBeeBase interface:
XBeeBase.__init__(self, name, core_services, set_in, prop_in)
self._tracer.calls("XBeeSerial.__init__()")
def __init__(self, name, core_services):
self.__name = name
self.__core = core_services
## Local State Variables:
self.__xbee_manager = None
## Settings Table Definition:
settings_list = [
Setting(
name='sample_rate_ms', type=int, required=False,
default_value=10000,
verify_function=lambda x: x > 0 and x < 0xffff),
Setting(
name='idle_off_seconds', type=int, required=False,
default_value=0, verify_function=lambda x: x >= 0),
Setting(name='input_source', type=str, required=False, default_value=None),
]
## Channel Properties Definition:
property_list = [
# gettable properties
ChannelSourceDeviceProperty(name="adder_reg1", type=float,
initial=Sample(timestamp=0, value=0.0),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=lambda x: self.prop_set_adder("adder_reg1", x)),
ChannelSourceDeviceProperty(name="power_on", type=Boolean,
initial=Sample(timestamp=0,
value=Boolean(False, style=STYLE_ONOFF)),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=self.prop_set_power_control1),
]
## Initialize the XBeeBase interface:
XBeeBase.__init__(self, self.__name, self.__core,
settings_list, property_list)
def __init__(self, name, core_services):
self.__name = name
self.__core = core_services
self.__xbee_manager = None
from core.tracing import get_tracer
self.__tracer = get_tracer(name)
# Settings:
#
# xbee_device_manager: must be set to the name of an XBeeDeviceManager
# instance.
# extended_address: is the extended address of the XBee device you
# would like to monitor.
# sample_rate_ms: is the sample rate of the XBee device.
settings_list = [
Setting(
name='xbee_device_manager', type=str, required=False,
default_value=''),
Setting(
name='extended_address', type=str, required=False,
default_value=''),
Setting(
name='sample_rate_ms', type=int, required=False,
default_value=2000,
verify_function=lambda x: x > 0 and x < 0xffff),
Setting(
name='channel_settings', type=str, required=False,
default_value="name,unit"),
]
## Channel Properties Definition:
property_list = []
## Initialize the DeviceBase interface:
XBeeBase.__init__(self, self.__name, self.__core,
settings_list, property_list)
def __init__(self, name, core_services):
self.__name = name
self.__core = core_services
## Local State Variables:
self.__xbee_manager = None
## Settings Table Definition:
settings_list = [
Setting(
name='sample_rate_ms', type=int, required=False,
default_value=1000,
verify_function=lambda x: x > 0 and x < 0xffff),
Setting(
name='default_state1', type=str, required=False,
default_value="off",
parser=lambda s: s.lower(),
verify_function=lambda s: s in initial_states),
Setting(
name='default_state2', type=str, required=False,
default_value="off",
parser=lambda s: s.lower(),
verify_function=lambda s: s in initial_states),
Setting(
name='default_state3', type=str, required=False,
default_value="off",
parser=lambda s: s.lower(),
verify_function=lambda s: s in initial_states),
Setting(
name='idle_off_seconds', type=int, required=False,
default_value=0, verify_function=lambda x: x >= 0),
Setting(name='power_on_source1', type=str, required=False),
Setting(name='power_on_source2', type=str, required=False),
Setting(name='power_on_source3', type=str, required=False),
Setting(name='device_profile', type=str, required=False),
Setting(name='input_source', type=str, required=False, default_value=None),
]
## Channel Properties Definition:
property_list = [
# gettable properties
ChannelSourceDeviceProperty(name="input", type=tuple,
initial=Sample(timestamp=0, value=(0,None)),
perms_mask=DPROP_PERM_SET | DPROP_PERM_GET,
set_cb=self.prop_set_power_control1),
ChannelSourceDeviceProperty(name="utemp", type=float,
initial=Sample(timestamp=0, unit="F", value=0.0),
perms_mask=DPROP_PERM_GET, options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="up", type=float,
initial=Sample(timestamp=0, unit="mv", value=0.0),
perms_mask=DPROP_PERM_GET, options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="aa", type=str,
initial=Sample(timestamp=0, value="thermostat_switch"),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET), options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="down", type=float,
initial=Sample(timestamp=0, unit="mv", value=0.0),
perms_mask=DPROP_PERM_GET, options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="on", type=float,
initial=Sample(timestamp=0, unit="mv", value=0.0),
perms_mask=DPROP_PERM_GET, options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="power_on", type=Boolean,
initial=Sample(timestamp=0,
value=Boolean(True, style=STYLE_ONOFF)),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=self.prop_set_power_control1),
ChannelSourceDeviceProperty(name="dim_up", type=Boolean,
initial=Sample(timestamp=0,
value=Boolean(True, style=STYLE_ONOFF)),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=self.prop_set_power_control2),
ChannelSourceDeviceProperty(name="dim_down", type=Boolean,
initial=Sample(timestamp=0,
value=Boolean(True, style=STYLE_ONOFF)),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=self.prop_set_power_control3),
ChannelSourceDeviceProperty(name="user_input_1", type=str,
initial=Sample(timestamp=0, value="TempLight.temperature"),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=lambda x: self.prop_set_adder("user_input_1", x)),
ChannelSourceDeviceProperty(name="adder_reg1", type=float,
initial=Sample(timestamp=0, value=0.0),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=lambda x: self.prop_set_adder("adder_reg1", x)),
ChannelSourceDeviceProperty(name="adder_reg2", type=float,
initial=Sample(timestamp=0, value=0.0),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=lambda x: self.prop_set_adder("adder_reg2", x)),
ChannelSourceDeviceProperty(name="adder_total", type=float,
initial=Sample(timestamp=0, value=0.0),
perms_mask=DPROP_PERM_GET,
options=DPROP_OPT_AUTOTIMESTAMP, set_cb=self.prop_set_power_control1),
ChannelSourceDeviceProperty(name="counter", type=int,
initial=Sample(timestamp=0, value=0),
perms_mask=DPROP_PERM_GET|DPROP_PERM_REFRESH,
options=DPROP_OPT_AUTOTIMESTAMP,
refresh_cb = self.refresh_counter),
# settable properties
ChannelSourceDeviceProperty(name="counter_reset", type=int,
perms_mask=DPROP_PERM_SET,
set_cb=self.prop_set_counter_reset),
ChannelSourceDeviceProperty(name="global_reset", type=int,
perms_mask=DPROP_PERM_SET,
set_cb=self.prop_set_global_reset),
]
## Initialize the XBeeBase interface:
XBeeBase.__init__(self, self.__name, self.__core,
settings_list, property_list)
def __init__(self, name, core_services):
self.__name = name
self.__core = core_services
self.__xbee_manager = None
from core.tracing import get_tracer
self.__tracer = get_tracer(name)
# Settings:
#
# xbee_device_manager: must be set to the name of an XBeeDeviceManager
# instance.
# extended_address: is the extended address of the XBee device you
# would like to monitor.
# sleep: True/False setting which determines if we should put the
# device to sleep between samples. Default: True
# sample_rate_ms: the sample rate of the XBee adapter. Default:
# 20,000 ms or 20 sec.
#
# Advanced settings:
#
# awake_time_ms: how long should the sensor stay awake after taking
# a sample? The default is 1000 ms.
# sample_predelay: how long should the sensor be awake for before taking
# its sample reading? This delay is used to allow the
# device's sensoring components to warm up before
# taking a sample. The default is 125ms.
settings_list = [
Setting(
name='xbee_device_manager', type=str, required=False,#actually this must be true
default_value=''),
Setting(
name='extended_address', type=str, required=False,#actually this must be true
default_value=''),
Setting(
name='sleep', type=bool, required=False,
default_value=True),
Setting(
name='sample_rate_ms', type=int, required=False,
default_value=20000),
# These settings are provided for advanced users, they
# are not required:
Setting(
name='awake_time_ms', type=int, required=False,
default_value=1000,
verify_function=lambda x: x >= 0 and x <= 0xffff),
Setting(
name='sample_predelay', type=int, required=False,
default_value=125,
verify_function=lambda x: x >= 0 and x <= 0xffff),
]
## Channel Properties Definition:
property_list = [
ChannelSourceDeviceProperty(name='data_channel', type=str,
initial=Sample(timestamp=0, value="", unit='hex'),
perms_mask=DPROP_PERM_GET,
options=DPROP_OPT_AUTOTIMESTAMP,
)
]
## Initialize the DeviceBase interface:
XBeeBase.__init__(self, self.__name, self.__core,
settings_list, property_list)
def __init__(self, name, core_services):
self.__name = name
self.__core = core_services
from core.tracing import get_tracer
self.__tracer = get_tracer(name)
## Local State Variables:
self.__xbee_manager = None
self.__OLD_HARDWARE = False
self.__scale = 0.0
self.__offset = 0.0
# Force a calibration every read.
self.__calibration_interval = 0
self.__calibration_time = -self.__calibration_interval
self.__lock = threading.Lock()
# Settings
#
# xbee_device_manager: must be set to the name of an XBeeDeviceManager
# instance.
# sample_rate_ms: the sample rate of the XBee adapter.
# channel1_mode: Operating input mode for pin 1 of the adapter.
# Must be a string value comprised of one of the following:
# "TenV" - 0-10v input available on any channel.
# "CurrentLoop" - 0-20 mA current loop available on
# any channel.
# channel2_mode: Operating input mode for pin 2 of the adapter.
# See channel1_mode for valid setting information.
# channel3_mode: Operating input mode for pin 3 of the adapter.
# See channel1_mode for valid setting information.
# channel4_mode: Operating input mode for pin 4 of the adapter.
# See channel1_mode for valid setting information.
settings_list = [
Setting(
name='extended_address', type=str, required=False,
default_value=''),
Setting(
name='sample_rate_ms', type=int, required=True,
default_value=60000,
verify_function=lambda x: x >= 0 and x <= CYCLIC_SLEEP_EXT_MAX_MS),
Setting(
name='channel1_mode', type=str, required=False,
verify_function=_verify_channel_mode,
default_value=self.LOCAL_AIO_MODE_TENV),
Setting(
name='channel2_mode', type=str, required=False,
verify_function=_verify_channel_mode,
default_value=self.LOCAL_AIO_MODE_TENV),
Setting(
name='channel3_mode', type=str, required=False,
verify_function=_verify_channel_mode,
default_value=self.LOCAL_AIO_MODE_TENV),
Setting(
name='channel4_mode', type=str, required=False,
verify_function=_verify_channel_mode,
default_value=self.LOCAL_AIO_MODE_TENV),
]
## Channel Properties Definition:
property_list = [
ChannelSourceDeviceProperty(name="channel1_value", type=float,
initial=Sample(timestamp=0, unit="V", value=0.0),
perms_mask=DPROP_PERM_GET|DPROP_PERM_REFRESH, options=DPROP_OPT_AUTOTIMESTAMP,
refresh_cb = self.refresh),
ChannelSourceDeviceProperty(name="channel2_value", type=float,
initial=Sample(timestamp=0, unit="V", value=0.0),
perms_mask=DPROP_PERM_GET|DPROP_PERM_REFRESH, options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="channel3_value", type=float,
initial=Sample(timestamp=0, unit="V", value=0.0),
perms_mask=DPROP_PERM_GET|DPROP_PERM_REFRESH, options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="channel4_value", type=float,
initial=Sample(timestamp=0, unit="V", value=0.0),
perms_mask=DPROP_PERM_GET|DPROP_PERM_REFRESH, options=DPROP_OPT_AUTOTIMESTAMP),
]
## Initialize the XBeeBase interface:
XBeeBase.__init__(self, self.__name, self.__core,
settings_list, property_list)
def __init__(self, name, core_services):
self.__name = name
self.__core = core_services
self.__event_timer = None
self.__serial_lock = Lock()
## Local State Variables:
self.__xbee_manager = None
self.update_timer = None
self.modes = {"off":0, "heat":1, "cool":2, "auto":3}
## Settings Table Definition:
settings_list = [
Setting(
name='xbee_device_manager', type=str, required=True),
Setting(
name='extended_address', type=str, required=True),
Setting(
name='sample_rate_sec', type=int, required=False,
default_value=300,
verify_function=lambda x: x >= 10 and x < 0xffff),
]
## Channel Properties Definition:
property_list = [
# gettable properties
ChannelSourceDeviceProperty(name="serialReceive", type=str,
initial=Sample(timestamp=0, unit="", value=""),
perms_mask=DPROP_PERM_GET, options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="serialSend", type=str,
initial=Sample(timestamp=0, unit="", value=""),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=self.serial_send),
ChannelSourceDeviceProperty(name="current_temp", type=int,
initial=Sample(timestamp=0, unit="F", value=0),
perms_mask=(DPROP_PERM_GET),
options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="spt", type=int,
initial=Sample(timestamp=0, unit="F", value=75),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=lambda x: self.set_sp("spt", x)),
ChannelSourceDeviceProperty(name="spht", type=int,
initial=Sample(timestamp=0, unit="F", value=80),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=lambda x: self.set_sph("spht", x)),
ChannelSourceDeviceProperty(name="splt", type=int,
initial=Sample(timestamp=0, unit="F", value=65),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=lambda x: self.set_spc("splt", x)),
ChannelSourceDeviceProperty(name="mode", type=str,
initial=Sample(timestamp=0, unit="o/h/c/a", value="Off"),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=lambda x: self.set_mode("mode", x)),
ChannelSourceDeviceProperty(name="start", type=Boolean,
initial=Sample(timestamp=0,
value=Boolean(True, style=STYLE_ONOFF)),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=lambda x: self.set_fan("start", x)),
ChannelSourceDeviceProperty(name="stop", type=Boolean,
initial=Sample(timestamp=0,
value=Boolean(True, style=STYLE_ONOFF)),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=lambda x: self.set_fan("stop", x)),
ChannelSourceDeviceProperty(name="ac_1", type=Boolean,
initial=Sample(timestamp=0,
value=Boolean(False, style=STYLE_ONOFF)),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="ac_2", type=Boolean,
initial=Sample(timestamp=0,
value=Boolean(False, style=STYLE_ONOFF)),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="heat_1", type=Boolean,
initial=Sample(timestamp=0,
value=Boolean(False, style=STYLE_ONOFF)),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="heat_2", type=Boolean,
initial=Sample(timestamp=0,
value=Boolean(False, style=STYLE_ONOFF)),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="heat_3", type=Boolean,
initial=Sample(timestamp=0,
value=Boolean(False, style=STYLE_ONOFF)),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP),
]
## Initialize the DeviceBase interface:
XBeeBase.__init__(self, self.__name, self.__core,
settings_list, property_list)
def __init__(self, name, core_services):
self.__name = name
self.__core = core_services
## Local State Variables:
self.__xbee_manager = None
## Settings Table Definition:
settings_list = [
Setting(
name='sleep', type=bool, required=False,
default_value=True),
Setting(
name='sample_rate_ms', type=int, required=True,
default_value=60000,
verify_function=lambda x: x >= 0 and x <= CYCLIC_SLEEP_EXT_MAX_MS),
# These settings are provided for advanced users, they
# are not required:
Setting(
name='default_state', type=str, required=False,
default_value="off",
parser=lambda s: s.lower(),
verify_function=lambda s: s in initial_states),
Setting(name="power_on_source", type=str, required=False),
Setting(
name='trace', type=Boolean, required=False,
default_value=Boolean("On", STYLE_ONOFF)),
Setting(
name='awake_time_ms', type=int, required=False,
default_value=1000,
verify_function=lambda x: x >= 0 and x <= 0xffff),
Setting(
name='sample_predelay', type=int, required=False,
default_value=125,
verify_function=lambda x: x >= 0 and x <= 0xffff),
Setting(
name='humidity_present', type=bool, required=False,
default_value=False),
Setting(
name='count_init', type=int, required=False, default_value=0,
verify_function=lambda x: x >= 0),
Setting(
name='update_rate', type=float, required=False, default_value=1.0,
verify_function=lambda x: x > 0.0),
Setting(
name='temp', type=float, required=False, default_value=1.0),
]
## Channel Properties Definition:
property_list = [
# gettable properties
ChannelSourceDeviceProperty(name="aa", type=str,
initial=Sample(timestamp=0, value="temp_motion"),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET), options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="motion", type=float,
initial=Sample(timestamp=0, value=0.0, unit="F"),
perms_mask=DPROP_PERM_GET, options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="temperature", type=float,
initial=Sample(timestamp=0, value=0.0, unit="F"),
perms_mask=DPROP_PERM_GET, options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="low_battery", type=Boolean,
initial=Sample(timestamp=0, value=Boolean(False, style=STYLE_ONOFF)),
perms_mask=DPROP_PERM_GET, options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="motion_event", type=Boolean,
initial=Sample(timestamp=0, value=Boolean(False, style=STYLE_ONOFF)),
perms_mask=DPROP_PERM_GET, options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="power_on", type=Boolean,
initial=Sample(timestamp=0,
value=Boolean(False, style=STYLE_ONOFF)),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=self.prop_set_power_control),
]
## Initialize the XBeeBase interface:
XBeeBase.__init__(self, self.__name, self.__core,
settings_list, property_list)
def __init__(self, name, core_services):
self.__name = name
self.__core = core_services
## Local State Variables:
self.__xbee_manager = None
self.trace = True
settings_list = [
Setting(
name='sleep', type=Boolean, required=False,
default_value=Boolean(False)),
Setting(
name='sample_rate_ms', type=int, required=False,
default_value=0,
verify_function=lambda x: x >= 0 and x <= 60000),
Setting(
name='sleep_time_ms', type=int, required=False,
default_value=60000,
verify_function=lambda x: x >= 0 and \
x <= CYCLIC_SLEEP_EXT_MAX_MS),
Setting(
name='power', type=Boolean, required=True,
default_value=Boolean("On", STYLE_ONOFF)),
Setting(
name='channel1_dir', type=str, required=True),
Setting(
name='channel1_source', type=str, required=False,
default_value=''),
Setting(
name='channel2_dir', type=str, required=True),
Setting(
name='channel2_source', type=str, required=False,
default_value=''),
Setting(
name='channel3_dir', type=str, required=True),
Setting(
name='channel3_source', type=str, required=False,
default_value=''),
Setting(
name='channel4_dir', type=str, required=True),
Setting(
name='channel4_source', type=str, required=False,
default_value=''),
# This setting is provided for advanced users, it is not required:
Setting(
name='awake_time_ms', type=int, required=False,
default_value=5000,
verify_function=lambda x: x >= 0 and x <= 0xffff),
Setting(
name='sample_predelay', type=int, required=False,
default_value=1000,
verify_function=lambda x: x >= 0 and x <= 0xffff),
Setting(
name='enable_low_battery', type=Boolean, required=False,
default_value=Boolean("Off", STYLE_ONOFF)),
]
## Channel Properties Definition:
# This device hardware can monitor the state of its output
# pins. Therefore, there are always four input channels.
# The other properties and channels will be populated when we
# know the directions of our IO ports.
property_list = [
ChannelSourceDeviceProperty(
name='channel1_input', type=bool,
initial=Sample(timestamp=0, value=False, unit='1'),
perms_mask=DPROP_PERM_GET,
options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(
name='channel2_input', type=bool,
initial=Sample(timestamp=0, value=False, unit='1'),
perms_mask=DPROP_PERM_GET,
options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(
name='channel3_input', type=bool,
initial=Sample(timestamp=0, value=False, unit='s1'),
perms_mask=DPROP_PERM_GET,
options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(
name='channel4_input', type=bool,
initial=Sample(timestamp=0, value=False, unit='s2'),
perms_mask=DPROP_PERM_GET,
options=DPROP_OPT_AUTOTIMESTAMP),
]
## Initialize the XBeeBase interface:
XBeeBase.__init__(self, self.__name, self.__core,
settings_list, property_list)
def __init__(self, name, core_services):
self.__name = name
self.__core = core_services
from core.tracing import get_tracer
self.__tracer = get_tracer(name)
## Local State Variables:
self.__xbee_manager = None
# Settings
#
# xbee_device_manager: must be set to the name of an XBeeDeviceManager
# instance.
# extended_address: the extended address of the XBee Sensor device you
# would like to monitor.
# sleep: True/False setting which determines if we should put the
# device to sleep between samples.
# sample_rate_ms: the sample rate of the XBee adapter.
# power: True/False setting to enable/disable the power output
# on terminal 6 of the adapter.
#
# raw_value: On/Off; On makes output sample raw binary, Off for scaled
# output. Defaults to Off/False.
# zero_clamp: min raw binary setting to call zero; if zero is disabled,
# else forces low values to zero.
# channel1_mode: Operating input mode for pin 1 of the adapter.
# Must be a string value comprised of one of the following:
# "TenV" - 0-10v input available on any channel.
# "CurrentLoop" - 0-20 mA current loop available on
# any channel.
# "Differential" - +/- 2.4a differential current mode
# enabled on channel1 & channel2 or
# channel3 & channel4.
# channel2_mode: Operating input mode for pin 2 of the adapter.
# See channel1_mode for valid setting information.
# channel3_mode: Operating input mode for pin 3 of the adapter.
# See channel1_mode for valid setting information.
# channel4_mode: Operating input mode for pin 4 of the adapter.
# See channel1_mode for valid setting information.
# awake_time_ms: How many milliseconds should the device remain
# awake after waking from sleep.
# sample_predelay: How long, in milliseconds, to wait after waking
# up from sleep before taking a sample from the
# inputs.
# enable_low_battery: Force an adapter to enable support for
# battery-monitor pin.
# It should be only enabled if adapter is using
# internal batteries. Optional, Off by default.
settings_list = [
Setting(
name='sleep', type=bool, required=False,
default_value=False),
Setting(
name='sample_rate_ms', type=int, required=True,
default_value=60000,
verify_function=lambda x: x >= 0 and x <= CYCLIC_SLEEP_EXT_MAX_MS),
Setting(
name='power', type=Boolean, required=True,
default_value=Boolean("On", STYLE_ONOFF)),
Setting(
name='raw_value', type=Boolean, required=False,
default_value=Boolean("Off", STYLE_ONOFF)),
Setting(
name='zero_clamp', type=int, required=False,
default_value=0, verify_function=lambda x: x >= 0),
Setting(
name='channel1_mode', type=str, required=False,
verify_function=_verify_channel_mode,
default_value=AIO_MODE_TENV),
Setting(
name='channel2_mode', type=str, required=False,
verify_function=_verify_channel_mode,
default_value=AIO_MODE_TENV),
Setting(
name='channel3_mode', type=str, required=False,
verify_function=_verify_channel_mode,
default_value=AIO_MODE_TENV),
Setting(
name='channel4_mode', type=str, required=False,
verify_function=_verify_channel_mode,
default_value=AIO_MODE_TENV),
# These settings are provided for advanced users, they are not required:
Setting(
name='awake_time_ms', type=int, required=False,
default_value=5000,
verify_function=lambda x: x >= 0 and x <= 0xffff),
Setting(
name='sample_predelay', type=int, required=False,
default_value=1000,
verify_function=lambda x: x >= 0 and x <= 0xffff),
Setting(
name='enable_low_battery', type=Boolean, required=False,
default_value=Boolean("Off", STYLE_ONOFF)),
]
## Channel Properties Definition:
property_list = [
ChannelSourceDeviceProperty(name="channel1_value", type=float,
initial=Sample(timestamp=0, unit="V", value=0.0),
perms_mask=DPROP_PERM_GET, options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="channel2_value", type=float,
initial=Sample(timestamp=0, unit="V", value=0.0),
perms_mask=DPROP_PERM_GET, options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="channel3_value", type=float,
initial=Sample(timestamp=0, unit="V", value=0.0),
perms_mask=DPROP_PERM_GET, options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="channel4_value", type=float,
initial=Sample(timestamp=0, unit="V", value=0.0),
perms_mask=DPROP_PERM_GET, options=DPROP_OPT_AUTOTIMESTAMP),
]
## Initialize the XBeeBase interface:
XBeeBase.__init__(self, self.__name, self.__core,
settings_list, property_list)
def __init__(self, name, core_services):
self.__name = name
self.__core = core_services
from core.tracing import get_tracer
self.__tracer = get_tracer(name)
## Local State Variables:
self.__xbee_manager = None
# Settings
#
# xbee_device_manager: must be set to the name of an XBeeDeviceManager
# instance.
# extended_address: the extended address of the XBee Sensor device you
# would like to monitor.
# sleep: True/False setting which determines if we should put the
# device to sleep between samples.
# sleep_time_ms: If set for sleep, specifies the length of time that
# the module will sleep after a period of awake_time_ms
# each cycle.
# sample_rate_ms: If set, then value is loaded into IR to cause period
# data updated regardless of change. Also, if non-zero
# then samples are always updated (timestamp refreshed)
# even if there was no change.
# (Is Optional, defaults to 0/off, valid range 0-60000)
# power: True/False setting to enable/disable the power output
# on terminal 6 of the adapter.
# channel1_dir: Operating I/O mode for pin 1 of the adapter.
# Must be a string value comprised of one of the following:
# "In" - pin is configured to be an input.
# "Out" - pin is configured to be an output.
# channel2_dir: Operating I/O mode for pin 2 of the adapter.
# See channel1_dir for valid setting information.
# channel3_dir: Operating I/O mode for pin 3 of the adapter.
# See channel1_dir for valid setting information.
# channel4_dir: Operating I/O mode for pin 4 of the adapter.
# See channel1_dir for valid setting information.
# channel1_source: If channel1_dir is configured as an output, this
# option setting may be specified to a
# "device.channel" channel name. The Boolean value
# of this channel will specify to logic state for
# pin 1 on the adapter.
# channel2_source: Configures output value source channel for pin 2
# of the adapter.
# See channel1_source setting information.
# channel3_source: Configures output value source channel for pin 3
# of the adapter.
# See channel1_source setting information.
# channel4_source: Configures output value source channel for pin 4
# of the adapter.
# See channel1_source setting information.
# awake_time_ms: How many milliseconds should the device remain
# awake after waking from sleep.
# sample_predelay: How long, in milliseconds, to wait after waking
# up from sleep before taking a sample from the
# inputs.
# enable_low_battery: Force an adapter to enable support for
# battery-monitor pin.
# It should be only enabled if adapter is using
# internal batteries. Optional, Off by default.
settings_list = [
Setting(
name='sleep', type=Boolean, required=False,
default_value=Boolean(False)),
Setting(
name='sample_rate_ms', type=int, required=False,
default_value=0,
verify_function=lambda x: x >= 0 and x <= 60000),
Setting(
name='sleep_time_ms', type=int, required=False,
default_value=60000,
verify_function=lambda x: x >= 0 and \
x <= CYCLIC_SLEEP_EXT_MAX_MS),
Setting(
name='power', type=Boolean, required=True,
default_value=Boolean("On", STYLE_ONOFF)),
Setting(
name='channel1_dir', type=str, required=True),
Setting(
name='channel1_default', type=Boolean, required=False),
Setting(
name='channel1_source', type=str, required=False,
default_value=''),
Setting(
name='channel2_dir', type=str, required=True),
Setting(
name='channel2_default', type=Boolean, required=False),
Setting(
name='channel2_source', type=str, required=False,
default_value=''),
Setting(
name='channel3_dir', type=str, required=True),
Setting(
name='channel3_default', type=Boolean, required=False),
Setting(
name='channel3_source', type=str, required=False,
default_value=''),
Setting(
name='channel4_dir', type=str, required=True),
Setting(
name='channel4_default', type=Boolean, required=False),
Setting(
name='channel4_source', type=str, required=False,
default_value=''),
# This setting is provided for advanced users, it is not required:
Setting(
name='awake_time_ms', type=int, required=False,
default_value=5000,
verify_function=lambda x: x >= 0 and x <= 0xffff),
Setting(
name='sample_predelay', type=int, required=False,
default_value=1000,
verify_function=lambda x: x >= 0 and x <= 0xffff),
Setting(
name='enable_low_battery', type=Boolean, required=False,
default_value=Boolean("Off", STYLE_ONOFF)),
]
## Channel Properties Definition:
# This device hardware can monitor the state of its output
# pins. Therefore, there are always four input channels.
# The other properties and channels will be populated when we
# know the directions of our IO ports.
property_list = [
ChannelSourceDeviceProperty(
name='channel1_input', type=bool,
initial=Sample(timestamp=0, value=False, unit='bool'),
perms_mask=DPROP_PERM_GET,
options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(
name='channel2_input', type=bool,
initial=Sample(timestamp=0, value=False, unit='bool'),
perms_mask=DPROP_PERM_GET,
options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(
name='channel3_input', type=bool,
initial=Sample(timestamp=0, value=False, unit='bool'),
perms_mask=DPROP_PERM_GET,
options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(
name='channel4_input', type=bool,
initial=Sample(timestamp=0, value=False, unit='bool'),
perms_mask=DPROP_PERM_GET,
options=DPROP_OPT_AUTOTIMESTAMP),
]
## Initialize the XBeeBase interface:
XBeeBase.__init__(self, self.__name, self.__core,
settings_list, property_list)
def __init__(self, name, core_services):
self.__name = name
self.__core = core_services
# self.__event_timer = None
self.__event_timer3 = None
self.__event_timer4 = None
self.__xbee_manager = None
self.local = 0
self.hour_timer = 0
self.source2 = None
self.source1 = None
self.ud_once = 0
self.sched = 0
self.w_retry = 0
self.timer_c = 0
# self.update_timer = None
# self.__stopevent = core_services
## Settings Table Definition:
settings_list = [
Setting(
name='count_init', type=int, required=False, default_value=0,
verify_function=lambda x: x >= 0),
Setting(
name='xbee_device_manager', type=str, required=False, default_value="xbee_device_manager"),
Setting(
name='pin3_source', type=str, required=False,
default_value=''),
Setting(
name='pin4_source', type=str, required=False,
default_value=''),
Setting(
name='extended_address', type=str, required=False, default_value="00:00:a2:00:40:33:9b:f3!"),
Setting(
name='sample_rate_sec_w', type=int, required=False,
default_value=600,
verify_function=lambda x: x >= 1 and x < 0xffff),
Setting(
name='sample_rate_sec', type=int, required=False,
default_value=30,
verify_function=lambda x: x >= 1 and x < 0xffff),
Setting(
name='update_rate', type=float, required=False, default_value=10,
verify_function=lambda x: x > 0.0),
]
## Channel Properties Definition:
property_list = [
# gettable properties
#driving io pins on DIO
ChannelSourceDeviceProperty(name="heat_off", type=Boolean,
initial=Sample(timestamp=0,
value=Boolean(False, style=STYLE_ONOFF)),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="med", type=str,
initial=Sample(timestamp=0, unit="med", value="0"),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="w_t", type=str,
initial=Sample(timestamp=0, unit="degF", value="60"),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="w_h", type=str,
initial=Sample(timestamp=0, unit="percent", value="O"),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP),
#driving io pins on DIO
ChannelSourceDeviceProperty(name="heat_on", type=Boolean,
initial=Sample(timestamp=0,
value=Boolean(False, style=STYLE_ONOFF)),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="sch", type=Boolean,
initial=Sample(timestamp=0,
value=Boolean(False, style=STYLE_ONOFF)),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=lambda x: self.update_name("sch", x)),
ChannelSourceDeviceProperty(name="err", type=Boolean,
initial=Sample(timestamp=0,
value=Boolean(False, style=STYLE_ONOFF)),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=lambda x: self.update_name("err", x)),
ChannelSourceDeviceProperty(name="hour", type=Boolean,
initial=Sample(timestamp=0,
value=Boolean(False, style=STYLE_ONOFF)),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=lambda x: self.set_hour("hour", x)),
ChannelSourceDeviceProperty(name="pin_2", type=Boolean,
initial=Sample(timestamp=0,
value=Boolean(False, style=STYLE_ONOFF)),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=lambda x: self.set_pin_2("pin_2", x)),
ChannelSourceDeviceProperty(name="heat_4", type=Boolean,
initial=Sample(timestamp=0,
value=Boolean(False, style=STYLE_ONOFF)),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="heat_5", type=Boolean,
initial=Sample(timestamp=0,
value=Boolean(False, style=STYLE_ONOFF)),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="heat_7", type=Boolean,
initial=Sample(timestamp=0,
value=Boolean(False, style=STYLE_ONOFF)),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="heat_6", type=Boolean,
initial=Sample(timestamp=0,
value=Boolean(False, style=STYLE_ONOFF)),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="heat_1", type=Boolean,
initial=Sample(timestamp=0,
value=Boolean(False, style=STYLE_ONOFF)),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="ac_1", type=Boolean,
initial=Sample(timestamp=0,
value=Boolean(False, style=STYLE_ONOFF)),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="current_temp", type=str,
initial=Sample(timestamp=0, unit="apyF", value="0"),
perms_mask=(DPROP_PERM_GET),
options=DPROP_OPT_AUTOTIMESTAMP),
# setable channesls
ChannelSourceDeviceProperty(name="f_count", type=int,
initial=Sample(timestamp=0, unit="failed", value=0),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=lambda x: self.send_failed("f_count", x)),
ChannelSourceDeviceProperty(name="hd1_on1", type=str,
initial=Sample(timestamp=0, unit="degF", value="4"),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=lambda x: self.update_name("hd1_on1", x)),
ChannelSourceDeviceProperty(name="hd1_off1", type=str,
initial=Sample(timestamp=0, unit="degF", value="4"),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=lambda x: self.update_name("hd1_off1", x)),
ChannelSourceDeviceProperty(name="ot_on1", type=str,
initial=Sample(timestamp=0, unit="degF", value="0"),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=lambda x: self.update_name("ot_on1", x)),
ChannelSourceDeviceProperty(name="mode1", type=str,
initial=Sample(timestamp=0, unit="o/h/c/a", value="O"),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=lambda x: self.update_name("mode1", x)),
ChannelSourceDeviceProperty(name="dev_h1", type=str,
initial=Sample(timestamp=0, unit="dev", value="3"),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=lambda x: self.update_name("dev_h1", x)),
ChannelSourceDeviceProperty(name="dev_l1", type=str,
initial=Sample(timestamp=0, unit="dev", value="3"),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=lambda x: self.update_name("dev_l1", x)),
ChannelSourceDeviceProperty(name="splt1", type=str,
initial=Sample(timestamp=0, unit="degF", value="65"),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=lambda x: self.update_name("splt1", x)),
ChannelSourceDeviceProperty(name="hd1_on2", type=str,
initial=Sample(timestamp=0, unit="degF", value="4"),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=lambda x: self.update_name("hd1_on2", x)),
ChannelSourceDeviceProperty(name="hd1_off2", type=str,
initial=Sample(timestamp=0, unit="degF", value="4"),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=lambda x: self.update_name("hd1_off2", x)),
ChannelSourceDeviceProperty(name="ot_on2", type=str,
initial=Sample(timestamp=0, unit="degF", value="0"),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=lambda x: self.update_name("ot_on2", x)),
ChannelSourceDeviceProperty(name="mode2", type=str,
initial=Sample(timestamp=0, unit="o/h/c/a", value="O"),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=lambda x: self.update_name("mode2", x)),
ChannelSourceDeviceProperty(name="dev_h2", type=str,
initial=Sample(timestamp=0, unit="dev", value="3"),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=lambda x: self.update_name("dev_h2", x)),
ChannelSourceDeviceProperty(name="dev_l2", type=str,
initial=Sample(timestamp=0, unit="dev", value="3"),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=lambda x: self.update_name("dev_l2", x)),
ChannelSourceDeviceProperty(name="splt2", type=str,
initial=Sample(timestamp=0, unit="degF", value="65"),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=lambda x: self.update_name("splt2", x)),
ChannelSourceDeviceProperty(name="hd1_on", type=str,
initial=Sample(timestamp=0, unit="degF", value="4"),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=lambda x: self.update_name("hd1_on", x)),
ChannelSourceDeviceProperty(name="hd1_off", type=str,
initial=Sample(timestamp=0, unit="degF", value="4"),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=lambda x: self.update_name("hd1_off", x)),
ChannelSourceDeviceProperty(name="ot_on", type=str,
initial=Sample(timestamp=0, unit="degF", value="0"),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=lambda x: self.update_name("ot_on", x)),
ChannelSourceDeviceProperty(name="mode", type=str,
initial=Sample(timestamp=0, unit="o/h/c/a", value="O"),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=lambda x: self.update_name("mode", x)),
ChannelSourceDeviceProperty(name="dev_h", type=str,
initial=Sample(timestamp=0, unit="dev", value="3"),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=lambda x: self.update_name("dev_h", x)),
ChannelSourceDeviceProperty(name="dev_l", type=str,
initial=Sample(timestamp=0, unit="dev", value="3"),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=lambda x: self.update_name("dev_l", x)),
ChannelSourceDeviceProperty(name="splt", type=str,
initial=Sample(timestamp=0, unit="degF", value="65"),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=lambda x: self.update_name("splt", x)),
ChannelSourceDeviceProperty(name="zip", type=str,
initial=Sample(timestamp=0, unit="zip", value="10001"),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=lambda x: self.update_name("zip", x)),
]
## Initialize the XBeeBase interface:
XBeeBase.__init__(self, self.__name, self.__core,
settings_list, property_list)
self.start()
def __init__(self, name, core_services, set_in=None, prop_in=None):
# DeviceBase will create:
# self._name, self._core, self._tracer,
# XBeeBase will create:
# self._xbee_manager, self._extended_address
## XBeeBase manages these settings:
# xbee_device_manager: the name of an XBeeDeviceManager instance.
# extended_address: the extended address of the XBee device you
# would like to monitor.
## Local State Variables:
self._last_timestamp = 0
# Settings
#
# xbee_device_manager: must be set to the name of an XBeeDeviceManager
# instance.
# extended_address: the extended address of the XBee Sensor device you
# would like to monitor.
# sleep: True/False setting which determines if we should put the
# device to sleep between samples. Default: True
# sample_rate_ms: the sample rate of the XBee adapter. Default:
# 60,000 ms or one minute.
#
# Advanced settings:
#
# awake_time_ms: how long should the sensor stay awake after taking
# a sample? The default is 1000 ms.
# sample_predelay: how long should the sensor be awake for
# before taking its sample reading? This
# delay is used to allow the
# device's sensoring components to warm up before
# taking a sample. The default is 125ms.
# humidity_present: force a sensor which has not been detected to have
# humidity capability to having humidity capability
# present. Writes the devices DD device-type value
# as a side effect.
# degf: The temperature channel will output in Fahrenheit,
# and units will be "F", if this boolean is set to True
# offset: A simple float that will be applied against the temperature.
# This offset is in degrees Celsius if degf = False,
# and in degrees Fahrenheit if degf = True.
settings_list = [
Setting(
name='sleep', type=bool, required=False,
default_value=self.DEF_SLEEP),
Setting(
name='sample_rate_ms', type=int, required=False,
default_value=self.DEF_SAMPLE_MS,
verify_function=lambda x: x >= 0 and \
x <= CYCLIC_SLEEP_EXT_MAX_MS),
# These settings are provided for advanced users, they
# are not required:
Setting(
name='awake_time_ms', type=int, required=False,
default_value=self.DEF_AWAKE_MS,
verify_function=lambda x: x >= 0 and x <= 0xffff),
Setting(
name='sample_predelay', type=int, required=False,
default_value=self.DEF_PREDELAY,
verify_function=lambda x: x >= 0 and x <= 0xffff),
Setting(
name='humidity_present', type=bool, required=False,
default_value=self.DEF_HUMIDITY),
Setting(
name='degf', type=bool, required=False,
default_value=self.DEF_DEGF),
Setting(
name='offset', type=float, required=False,
default_value=self.DEF_OFFSET),
]
# Add our settings_list entries into the settings passed to us.
set_in = self.merge_settings(set_in, settings_list)
## Channel Properties Definition:
property_list = [
# gettable properties
ChannelSourceDeviceProperty(name="light",
type=float,
initial=Sample(timestamp=0,
value=0.0,
unit="brightness"),
perms_mask=DPROP_PERM_GET,
options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="temperature",
type=float,
initial=Sample(timestamp=0,
value=0.0,
unit="C"),
perms_mask=DPROP_PERM_GET,
options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="low_battery",
type=bool,
initial=Sample(timestamp=0,
value=False),
perms_mask=DPROP_PERM_GET,
options=DPROP_OPT_AUTOTIMESTAMP),
]
# Add our property_list entries into the properties passed to us.
prop_in = self.merge_properties(prop_in, property_list)
## Initialize the XBeeBase interface:
XBeeBase.__init__(self, name, core_services, set_in, prop_in)
self._tracer.calls("XBeeSensor.__init__()")
def __init__(self, name, core_services):
self.__name = name
self.__core = core_services
from core.tracing import get_tracer
self.__tracer = get_tracer(name)
## Local State Variables:
self.__xbee_manager = None
# Settings
# xbee_device_manager: must be set to the name of an XBeeDeviceManager
# instance.
# sample_rate_ms: the sample rate of the XBee adapter.
# channel1_dir: Operating I/O mode for pin 1 of the adapter.
# Must be a string value comprised of one of the following:
# "In" - pin is configured to be an input.
# "Out" - pin is configured to be an output.
# channel2_dir: Operating I/O mode for pin 2 of the adapter.
# See channel2_dir for valid setting information.
# channel3_dir: Operating I/O mode for pin 3 of the adapter.
# See channel3_dir for valid setting information.
# channel4_dir: Operating I/O mode for pin 4 of the adapter.
# See channel4_dir for valid setting information.
# channel1_source: If channel1_dir is configed as an output, this
# option setting may be specified to a
# "device.channel" channel name. The Boolean value
# of this channel will specify to logic state for
# pin 1 on the adapter.
# channel2_source: Configures output value source channel for pin 2
# of the adapter.
# See channel1_source setting information.
# channel3_source: Configures output value source channel for pin 3
# of the adapter.
# See channel1_source setting information.
# channel4_source: Configures output value source channel for pin 4
# of the adapter.
# See channel1_source setting information.
settings_list = [
Setting(
name='extended_address', type=str, required=False,
default_value=''),
Setting(
name='sample_rate_ms', type=int, required=True,
default_value=60000,
verify_function=lambda x: x >= 0 and x <= CYCLIC_SLEEP_EXT_MAX_MS),
Setting(
name='channel1_dir', type=str, required=True),
Setting(
name='channel1_source', type=str, required=False,
default_value=''),
Setting(
name='channel2_dir', type=str, required=True),
Setting(
name='channel2_source', type=str, required=False,
default_value=''),
Setting(
name='channel3_dir', type=str, required=True),
Setting(
name='channel3_source', type=str, required=False,
default_value=''),
Setting(
name='channel4_dir', type=str, required=True),
Setting(
name='channel4_source', type=str, required=False,
default_value=''),
]
## Channel Properties Definition:
property_list = [
ChannelSourceDeviceProperty(
name='channel1_input', type=bool,
initial=Sample(timestamp=0, value=False, unit='bool'),
perms_mask=DPROP_PERM_GET,
options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(
name='channel2_input', type=bool,
initial=Sample(timestamp=0, value=False, unit='bool'),
perms_mask=DPROP_PERM_GET,
options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(
name='channel3_input', type=bool,
initial=Sample(timestamp=0, value=False, unit='bool'),
perms_mask=DPROP_PERM_GET,
options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(
name='channel4_input', type=bool,
initial=Sample(timestamp=0, value=False, unit='bool'),
perms_mask=DPROP_PERM_GET,
options=DPROP_OPT_AUTOTIMESTAMP),
]
self.DIO_CONTROL_LINES = [ "d0", "d1", "d2", "d3" ]
self.INPUT_CHANNEL_TO_PIN = [ 0, 1, 2, 3 ]
self.DIO_MODE_INPUT = 3
self.DIO_MODE_OUTPUT_HIGH = 3
self.DIO_MODE_OUTPUT_LOW = 4
## Initialize the XBeeBase interface:
XBeeBase.__init__(self, self.__name, self.__core,
settings_list, property_list)
def __init__(self, name, core_services):
self.__name = name
self.__core = core_services
from core.tracing import get_tracer
self.__tracer = get_tracer(name)
## Local State Variables:
self.__xbee_manager = None
self.__OLD_HARDWARE = False
self.__scale = 0.0
self.__offset = 0.0
# Force a calibration every read.
self.__calibration_interval = 0
self.__calibration_time = -self.__calibration_interval
self.__lock = threading.Lock()
# Settings
#
# xbee_device_manager: must be set to the name of an XBeeDeviceManager
# instance.
# sample_rate_ms: the sample rate of the XBee adapter.
# channel1_mode: Operating input mode for pin 1 of the adapter.
# Must be a string value comprised of one of the following:
# "TenV" - 0-10v input available on any channel.
# "CurrentLoop" - 0-20 mA current loop available on
# any channel.
# channel2_mode: Operating input mode for pin 2 of the adapter.
# See channel1_mode for valid setting information.
# channel3_mode: Operating input mode for pin 3 of the adapter.
# See channel1_mode for valid setting information.
# channel4_mode: Operating input mode for pin 4 of the adapter.
# See channel1_mode for valid setting information.
settings_list = [
# Setting( This is in xbee_base!
# name='extended_address', type=str, required=False,
# default_value=''),
Setting(name='sample_rate_ms',
type=int,
required=True,
default_value=60000,
verify_function=lambda x: x >= 0 and x <=
CYCLIC_SLEEP_EXT_MAX_MS),
Setting(name='channel1_mode',
type=str,
required=False,
verify_function=_verify_channel_mode,
default_value=self.LOCAL_AIO_MODE_TENV),
Setting(name='channel2_mode',
type=str,
required=False,
verify_function=_verify_channel_mode,
default_value=self.LOCAL_AIO_MODE_TENV),
Setting(name='channel3_mode',
type=str,
required=False,
verify_function=_verify_channel_mode,
default_value=self.LOCAL_AIO_MODE_TENV),
Setting(name='channel4_mode',
type=str,
required=False,
verify_function=_verify_channel_mode,
default_value=self.LOCAL_AIO_MODE_TENV),
]
## Channel Properties Definition:
property_list = [
ChannelSourceDeviceProperty(name="channel1_value",
type=float,
initial=Sample(timestamp=0,
unit="V",
value=0.0),
perms_mask=DPROP_PERM_GET
| DPROP_PERM_REFRESH,
options=DPROP_OPT_AUTOTIMESTAMP,
refresh_cb=self.refresh),
ChannelSourceDeviceProperty(name="channel2_value",
type=float,
initial=Sample(timestamp=0,
unit="V",
value=0.0),
perms_mask=DPROP_PERM_GET
| DPROP_PERM_REFRESH,
options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="channel3_value",
type=float,
initial=Sample(timestamp=0,
unit="V",
value=0.0),
perms_mask=DPROP_PERM_GET
| DPROP_PERM_REFRESH,
options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="channel4_value",
type=float,
initial=Sample(timestamp=0,
unit="V",
value=0.0),
perms_mask=DPROP_PERM_GET
| DPROP_PERM_REFRESH,
options=DPROP_OPT_AUTOTIMESTAMP),
]
## Initialize the XBeeBase interface:
XBeeBase.__init__(self, self.__name, self.__core, settings_list,
property_list)
def __init__(self, name, core_services, set_in=None, prop_in=None):
"""\
Initialize an XBee Wall Router instance.
Parameters:
* name - The name of the XBee Wall Router instance.
* core - The Core services instance.
* set_in - settings from a derived class
* prop_in - properties from a derived class
"""
# DeviceBase will create:
# self._name, self._core, self._tracer,
# XBeeBase will create:
# self._xbee_manager, self._extended_address
## Settings Table Definition:
settings_list = [
Setting(
name='sleep_ms', type=int, required=False,
default_value=self.DEF_SLEEP_MS,
verify_function=lambda x: x >= 0 and \
x <= CYCLIC_SLEEP_EXT_MAX_MS),
Setting(name="led1_source", type=str, required=False),
Setting(name="led2_source", type=str, required=False),
Setting(name="led3_source", type=str, required=False),
# This setting is provided for advanced users:
Setting(
name='awake_time_ms', type=int, required=False,
default_value=self.DEF_AWAKE_MS,
verify_function=lambda x: x >= 0 and x <= 0xffff),
]
# Add our settings_list entries into the settings passed to us.
set_in = self.merge_settings(set_in, settings_list)
## Channel Properties Definition:
property_list = [
# gettable properties
ChannelSourceDeviceProperty(name="sw1",
type=bool,
initial=Sample(timestamp=0,
value=False),
perms_mask=DPROP_PERM_GET,
options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="sw2",
type=bool,
initial=Sample(timestamp=0,
value=False),
perms_mask=DPROP_PERM_GET,
options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="sw3",
type=bool,
initial=Sample(timestamp=0,
value=False),
perms_mask=DPROP_PERM_GET,
options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="sw4",
type=bool,
initial=Sample(timestamp=0,
value=False),
perms_mask=DPROP_PERM_GET,
options=DPROP_OPT_AUTOTIMESTAMP),
# gettable and settable properties
ChannelSourceDeviceProperty(
name="led1",
type=Boolean,
initial=Sample(timestamp=0,
value=Boolean(False, style=STYLE_ONOFF)),
perms_mask=(DPROP_PERM_GET | DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=lambda sample: self.prop_set_led("led1", sample)),
ChannelSourceDeviceProperty(
name="led2",
type=Boolean,
initial=Sample(timestamp=0,
value=Boolean(False, style=STYLE_ONOFF)),
perms_mask=(DPROP_PERM_GET | DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=lambda sample: self.prop_set_led("led2", sample)),
ChannelSourceDeviceProperty(
name="led3",
type=Boolean,
initial=Sample(timestamp=0,
value=Boolean(False, style=STYLE_ONOFF)),
perms_mask=(DPROP_PERM_GET | DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=lambda sample: self.prop_set_led("led3", sample)),
]
# Add our property_list entries into the properties passed to us.
prop_in = self.merge_properties(prop_in, property_list)
## Initialize the XBeeBase interface:
XBeeBase.__init__(self, name, core_services, set_in, prop_in)
self._tracer.calls("XBeeXBIB.__init__()")
def __init__(self, name, core_services):
self.__name = name
self.__core = core_services
self.include_unit = "F"
self.signals = 1
self.count = 700
self.sleeping = 0
## Local State Variables:
self.__xbee_manager = None
## Settings Table Definition:
settings_list = [
Setting(
name='sleep', type=bool, required=False,
default_value=True),
Setting(
name='sample_rate_ms', type=int, required=True,
default_value=10000,
verify_function=lambda x: x >= 0 and x <= CYCLIC_SLEEP_EXT_MAX_MS),
# These settings are provided for advanced users, they
# are not required:
Setting(
name='trace', type=Boolean, required=False,
default_value=Boolean("On", STYLE_ONOFF)),
Setting(
name='awake_time_ms', type=int, required=False,
default_value=1500,
verify_function=lambda x: x >= 0 and x <= 0xffff),
Setting(
name='sample_predelay', type=int, required=False,
default_value=125,
verify_function=lambda x: x >= 0 and x <= 0xffff),
Setting(
name='humidity_present', type=bool, required=False,
default_value=False)
]
## Channel Properties Definition:
property_list = [
# gettable properties
ChannelSourceDeviceProperty(name="excl", type=Boolean,
initial=Sample(timestamp=1315351550.0,
value=Boolean(False, style=STYLE_ONOFF)),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=lambda x: self.exclude("excl", x)),
ChannelSourceDeviceProperty(name="get_signal", type=Boolean,
initial=Sample(timestamp=0,
value=Boolean(True, style=STYLE_ONOFF)),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=lambda x: self.set_sig_update()),
ChannelSourceDeviceProperty(name="signal", type=str,
initial=Sample(timestamp=0, unit="", value=""),
perms_mask=DPROP_PERM_GET, options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="volts", type=str,
initial=Sample(timestamp=0, unit="", value=""),
perms_mask=DPROP_PERM_GET, options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="incl", type=Boolean,
initial=Sample(timestamp=1315351550.0,
value=Boolean(True, style=STYLE_ONOFF)),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=lambda x: self.include("incl", x)),
ChannelSourceDeviceProperty(name="light", type=float,
initial=Sample(timestamp=0, value=0.0, unit="brightness"),
perms_mask=DPROP_PERM_GET, options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="temperature", type=float,
initial=Sample(timestamp=0, value=0.0, unit="F"),
perms_mask=DPROP_PERM_GET, options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="low_battery", type=bool,
initial=Sample(timestamp=0, value=False),
perms_mask=DPROP_PERM_GET, options=DPROP_OPT_AUTOTIMESTAMP),
]
## Initialize the XBeeBase interface:
XBeeBase.__init__(self, self.__name, self.__core,
settings_list, property_list)
def __init__(self, name, core_services, set_in=None, prop_in=None):
"""\
Initialize an XBee Wall Router instance.
Parameters:
* name - The name of the XBee Wall Router instance.
* core - The Core services instance.
* set_in - settings from a derived class
* prop_in - properties from a derived class
"""
# DeviceBase will create:
# self._name, self._core, self._tracer,
# XBeeBase will create:
# self._xbee_manager, self._extended_address
# Settings
#
# sleep: True/False setting which determines if we should put the
# device to sleep between samples.
# sample_rate_ms: the sample rate of the XBee adapter.
# power: True/False setting to enable/disable the power output
# on terminal 6 of the adapter.
#
# raw_value: On/Off; On makes output sample raw binary, Off for scaled
# output. Defaults to Off/False.
# zero_clamp: min raw binary setting to call zero; if zero is disabled,
# else forces low values to zero.
# channel1_mode: Operating input mode for pin 1 of the adapter.
# Must be a string value comprised of one of
# the following:
# "TenV" - 0-10v input available on any channel.
# "CurrentLoop" - 0-20 mA current loop available on
# any channel.
# "Differential" - +/- 2.4a differential current mode
# enabled on channel1 & channel2 or
# channel3 & channel4.
# channel2_mode: Operating input mode for pin 2 of the adapter.
# See channel1_mode for valid setting information.
# channel3_mode: Operating input mode for pin 3 of the adapter.
# See channel1_mode for valid setting information.
# channel4_mode: Operating input mode for pin 4 of the adapter.
# See channel1_mode for valid setting information.
# awake_time_ms: How many milliseconds should the device remain
# awake after waking from sleep.
# sample_predelay: How long, in milliseconds, to wait after waking
# up from sleep before taking a sample from the
# inputs.
# enable_low_battery: Force an adapter to enable support for
# battery-monitor pin.
# It should be only enabled if adapter is using
# internal batteries. Optional, Off by default.
settings_list = [
Setting(
name='sleep', type=bool, required=False,
default_value=False),
Setting(
name='sample_rate_ms', type=int, required=False,
default_value=60000,
verify_function=lambda x: x >= 0 and \
x <= CYCLIC_SLEEP_EXT_MAX_MS),
Setting(
name='power', type=Boolean, required=False,
default_value=Boolean("On", STYLE_ONOFF)),
Setting(
name='raw_value', type=Boolean, required=False,
default_value=Boolean("Off", STYLE_ONOFF)),
Setting(
name='zero_clamp', type=int, required=False,
default_value=0, verify_function=lambda x: x >= 0),
Setting(
name=self.CHN_MODE_NAME[0], type=str, required=False,
verify_function=_verify_channel_mode,
default_value=AIO_MODE_TENV),
Setting(
name=self.CHN_MODE_NAME[1], type=str, required=False,
verify_function=_verify_channel_mode,
default_value=AIO_MODE_TENV),
Setting(
name=self.CHN_MODE_NAME[2], type=str, required=False,
verify_function=_verify_channel_mode,
default_value=AIO_MODE_TENV),
Setting(
name=self.CHN_MODE_NAME[3], type=str, required=False,
verify_function=_verify_channel_mode,
default_value=AIO_MODE_TENV),
# These settings are provided for advanced users, they are
# not required:
Setting(
name='awake_time_ms', type=int, required=False,
default_value=5000,
verify_function=lambda x: x >= 0 and x <= 0xffff),
Setting(
name='sample_predelay', type=int, required=False,
default_value=1000,
verify_function=lambda x: x >= 0 and x <= 0xffff),
Setting(
name='enable_low_battery', type=Boolean, required=False,
default_value=Boolean("Off", STYLE_ONOFF)),
]
# Add our settings_list entries into the settings passed to us.
set_in = self.merge_settings(set_in, settings_list)
## Channel Properties Definition:
property_list = [
ChannelSourceDeviceProperty(name=self.CHN_VALUE_NAME[0],
type=float,
initial=Sample(timestamp=0,
unit="V",
value=0.0),
perms_mask=DPROP_PERM_GET,
options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name=self.CHN_VALUE_NAME[1],
type=float,
initial=Sample(timestamp=0,
unit="V",
value=0.0),
perms_mask=DPROP_PERM_GET,
options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name=self.CHN_VALUE_NAME[2],
type=float,
initial=Sample(timestamp=0,
unit="V",
value=0.0),
perms_mask=DPROP_PERM_GET,
options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name=self.CHN_VALUE_NAME[3],
type=float,
initial=Sample(timestamp=0,
unit="V",
value=0.0),
perms_mask=DPROP_PERM_GET,
options=DPROP_OPT_AUTOTIMESTAMP),
]
# Add our property_list entries into the properties passed to us.
prop_in = self.merge_properties(prop_in, property_list)
## Initialize the XBeeBase interface:
XBeeBase.__init__(self, name, core_services, set_in, prop_in)
self._tracer.calls("XBeeAIO.__init__()")
def __init__(self, name, core_services):
self.__name = name
self.__core = core_services
## Local State Variables:
self.__xbee_manager = None
## Settings Table Definition:
settings_list = [
Setting(
name='sleep', type=bool, required=False,
default_value=True),
Setting(
name='sample_rate_ms', type=int, required=False,
default_value=10000,
verify_function=lambda x: x >= 0 and x <= CYCLIC_SLEEP_EXT_MAX_MS),
Setting(
name='awake_time_ms', type=int, required=False,
default_value=1100,
verify_function=lambda x: x >= 0 and x <= 0xffff),
Setting(
name='sample_predelay', type=int, required=False,
default_value=250,
verify_function=lambda x: x >= 0 and x <= 0xffff),
Setting(
name='idle_off_seconds', type=int, required=False,
default_value=0, verify_function=lambda x: x >= 0),
Setting(name='device_profile', type=str, required=False),
Setting(name='input_source', type=str, required=False, default_value=None),
]
## Channel Properties Definition:
property_list = [
# gettable properties
# ChannelSourceDeviceProperty(name="input", type=tuple,
# initial=Sample(timestamp=0, value=(0,None)),
# perms_mask=DPROP_PERM_SET | DPROP_PERM_GET,
# set_cb=self.prop_set_power_control1),
ChannelSourceDeviceProperty(name="driving_temp", type=float,
initial=Sample(timestamp=0, unit="F", value=0.0),
perms_mask=DPROP_PERM_GET, options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="temperature", type=float,
initial=Sample(timestamp=0, unit="F", value=0.0),
perms_mask=DPROP_PERM_GET, options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="aa", type=str,
initial=Sample(timestamp=0, value="thermostat"),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET), options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="red_light", type=float,
initial=Sample(timestamp=0, unit="mv", value=0.0),
perms_mask=DPROP_PERM_GET, options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="on", type=float,
initial=Sample(timestamp=0, unit="mv", value=0.0),
perms_mask=DPROP_PERM_GET, options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="heat", type=Boolean,
initial=Sample(timestamp=0,
value=Boolean(False, style=STYLE_ONOFF)),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=self.heat),
ChannelSourceDeviceProperty(name="AC", type=Boolean,
initial=Sample(timestamp=0,
value=Boolean(False, style=STYLE_ONOFF)),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=self.ac),
ChannelSourceDeviceProperty(name="heat_ac_on", type=Boolean,
initial=Sample(timestamp=0,
value=Boolean(False, style=STYLE_ONOFF)),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="on_for_ac_off_for_heat_status", type=Boolean,
initial=Sample(timestamp=0,
value=Boolean(True, style=STYLE_ONOFF)),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="fan_on", type=Boolean,
initial=Sample(timestamp=0,
value=Boolean(False, style=STYLE_ONOFF)),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="fan", type=Boolean,
initial=Sample(timestamp=0,
value=Boolean(False, style=STYLE_ONOFF)),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=self.fan),
ChannelSourceDeviceProperty(name="switch_to_old", type=Boolean,
initial=Sample(timestamp=0,
value=Boolean(False, style=STYLE_ONOFF)),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=self.old_thermostat),
ChannelSourceDeviceProperty(name="old_thermostat_on", type=Boolean,
initial=Sample(timestamp=0,
value=Boolean(False, style=STYLE_ONOFF)),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="user_input_1", type=str,
initial=Sample(timestamp=0, value="thermostat.temperature"),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=lambda x: self.prop_set_adder("user_input_1", x)),
ChannelSourceDeviceProperty(name="desired_temp", type=float,
initial=Sample(timestamp=0, value=0.0),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=lambda x: self.prop_set_adder("desired_temp", x)),
# settable properties
# ChannelSourceDeviceProperty(name="counter_reset", type=int,
# perms_mask=DPROP_PERM_SET,
# set_cb=self.prop_set_counter_reset),
]
## Initialize the XBeeBase interface:
XBeeBase.__init__(self, self.__name, self.__core,
settings_list, property_list)
def __init__(self, name, core_services, set_in=None, prop_in=None):
"""\
Initialize an XBee Wall Router instance.
Parameters:
* name - The name of the XBee Wall Router instance.
* core - The Core services instance.
* set_in - settings from a derived class
* prop_in - properties from a derived class
"""
# DeviceBase will create:
# self._name, self._core, self._tracer,
# XBeeBase will create:
# self._xbee_manager, self._extended_address
## Settings Table Definition:
settings_list = [
Setting(
name='sleep_ms', type=int, required=False,
default_value=self.DEF_SLEEP_MS,
verify_function=lambda x: x >= 0 and \
x <= CYCLIC_SLEEP_EXT_MAX_MS),
Setting(name="led1_source", type=str, required=False),
Setting(name="led2_source", type=str, required=False),
Setting(name="led3_source", type=str, required=False),
# This setting is provided for advanced users:
Setting(
name='awake_time_ms', type=int, required=False,
default_value=self.DEF_AWAKE_MS,
verify_function=lambda x: x >= 0 and x <= 0xffff),
]
# Add our settings_list entries into the settings passed to us.
set_in = self.merge_settings(set_in, settings_list)
## Channel Properties Definition:
property_list = [
# gettable properties
ChannelSourceDeviceProperty(name="sw1", type=bool,
initial=Sample(timestamp=0, value=False),
perms_mask=DPROP_PERM_GET, options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="sw2", type=bool,
initial=Sample(timestamp=0, value=False),
perms_mask=DPROP_PERM_GET, options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="sw3", type=bool,
initial=Sample(timestamp=0, value=False),
perms_mask=DPROP_PERM_GET, options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="sw4", type=bool,
initial=Sample(timestamp=0, value=False),
perms_mask=DPROP_PERM_GET, options=DPROP_OPT_AUTOTIMESTAMP),
# gettable and settable properties
ChannelSourceDeviceProperty(name="led1", type=Boolean,
initial=Sample(timestamp=0,
value=Boolean(False, style=STYLE_ONOFF)),
perms_mask=(DPROP_PERM_GET | DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=lambda sample: self.prop_set_led("led1", sample)),
ChannelSourceDeviceProperty(name="led2", type=Boolean,
initial=Sample(timestamp=0,
value=Boolean(False, style=STYLE_ONOFF)),
perms_mask=(DPROP_PERM_GET | DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=lambda sample: self.prop_set_led("led2", sample)),
ChannelSourceDeviceProperty(name="led3", type=Boolean,
initial=Sample(timestamp=0,
value=Boolean(False, style=STYLE_ONOFF)),
perms_mask=(DPROP_PERM_GET | DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=lambda sample: self.prop_set_led("led3", sample)),
]
# Add our property_list entries into the properties passed to us.
prop_in = self.merge_properties(prop_in, property_list)
## Initialize the XBeeBase interface:
XBeeBase.__init__(self, name, core_services, set_in, prop_in)
self._tracer.calls("XBeeXBIB.__init__()")
def __init__(self, name, core_services):
self.__name = name
self.__core = core_services
self.__event_timer = None
## Local State Variables:
self.__xbee_manager = None
self.update_timer = None
## Settings Table Definition:
settings_list = [
Setting(
name='sleep', type=bool, required=False,
default_value=True),
Setting(
name='sample_rate_sec', type=int, required=False,
default_value=30,
verify_function=lambda x: x >= 10 and x < 0xffff),
Setting(
name='sample_rate_ms', type=int, required=False,
default_value=5000,
verify_function=lambda x: x >= 0 and x <= CYCLIC_SLEEP_EXT_MAX_MS),
Setting(
name='awake_time_ms', type=int, required=False,
default_value=50,
verify_function=lambda x: x >= 0 and x <= 0xffff),
Setting(
name='sample_predelay', type=int, required=False,
default_value=50,
verify_function=lambda x: x >= 0 and x <= 0xffff),
Setting(
name='default_state1', type=str, required=False,
default_value="same",
parser=lambda s: s.lower(),
verify_function=lambda s: s in initial_states),
Setting(
name='default_state2', type=str, required=False,
default_value="off",
parser=lambda s: s.lower(),
verify_function=lambda s: s in initial_states),
Setting(
name='default_state3', type=str, required=False,
default_value="off",
parser=lambda s: s.lower(),
verify_function=lambda s: s in initial_states),
Setting(
name='idle_off_seconds', type=int, required=False,
default_value=0, verify_function=lambda x: x >= 0),
Setting(name='input_source', type=str, required=False, default_value=None),
]
## Channel Properties Definition:
property_list = [
# gettable properties
# ChannelSourceDeviceProperty(name="input", type=tuple,
# initial=Sample(timestamp=0, value=(0,None)),
# perms_mask=DPROP_PERM_SET | DPROP_PERM_GET,
# set_cb=self.prop_set_power_control1),
ChannelSourceDeviceProperty(name="open_close", type=Boolean,
initial=Sample(timestamp=0,
value=Boolean(True, style=STYLE_ONOFF)),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=self.open),
ChannelSourceDeviceProperty(name="auto", type=Boolean,
initial=Sample(timestamp=0,
value=Boolean(False, style=STYLE_ONOFF)),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=self.auto),
ChannelSourceDeviceProperty(name="aa", type=str,
initial=Sample(timestamp=0, value="vent"),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET), options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="zone_temperature", type=str,
initial=Sample(timestamp=0, value=""),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=lambda x: self.prop_set_adder("zone_temperature", x)),
ChannelSourceDeviceProperty(name="driving_thermostat", type=str,
initial=Sample(timestamp=0, value="thermostat.on_for_ac_off_for_heat_status"),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=lambda x: self.prop_set_adder("driving_thermostat", x)),
ChannelSourceDeviceProperty(name="battery", type=int,
initial=Sample(timestamp=0, unit="V", value=0),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="driving_temp", type=float,
initial=Sample(timestamp=0, value=0.0),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=lambda x: self.prop_set_adder("desired_temp", x)),
ChannelSourceDeviceProperty(name="desired_temp", type=float,
initial=Sample(timestamp=0, value=0.0),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=lambda x: self.prop_set_adder("desired_temp", x)),
ChannelSourceDeviceProperty(name="thermostat_mode", type=str,
initial=Sample(timestamp=0, unit="N/A", value="Off"),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP),
# settable properties
# ChannelSourceDeviceProperty(name="counter_reset", type=int,
# perms_mask=DPROP_PERM_SET,
# set_cb=self.prop_set_counter_reset),
]
## Initialize the XBeeBase interface:
XBeeBase.__init__(self, self.__name, self.__core,
settings_list, property_list)
def __init__(self, name, core_services):
self.__name = name
self.__core = core_services
from core.tracing import get_tracer
self.__tracer = get_tracer(name)
## Local State Variables:
self.__xbee_manager = None
# Settings
# xbee_device_manager: must be set to the name of an XBeeDeviceManager
# instance.
# sample_rate_ms: the sample rate of the XBee adapter.
# channel1_dir: Operating I/O mode for pin 1 of the adapter.
# Must be a string value comprised of one of the following:
# "In" - pin is configured to be an input.
# "Out" - pin is configured to be an output.
# channel2_dir: Operating I/O mode for pin 2 of the adapter.
# See channel2_dir for valid setting information.
# channel3_dir: Operating I/O mode for pin 3 of the adapter.
# See channel3_dir for valid setting information.
# channel4_dir: Operating I/O mode for pin 4 of the adapter.
# See channel4_dir for valid setting information.
# channel1_source: If channel1_dir is configed as an output, this
# option setting may be specified to a
# "device.channel" channel name. The Boolean value
# of this channel will specify to logic state for
# pin 1 on the adapter.
# channel2_source: Configures output value source channel for pin 2
# of the adapter.
# See channel1_source setting information.
# channel3_source: Configures output value source channel for pin 3
# of the adapter.
# See channel1_source setting information.
# channel4_source: Configures output value source channel for pin 4
# of the adapter.
# See channel1_source setting information.
settings_list = [
Setting(name='extended_address',
type=str,
required=False,
default_value=''),
Setting(name='sample_rate_ms',
type=int,
required=True,
default_value=60000,
verify_function=lambda x: x >= 0 and x <=
CYCLIC_SLEEP_EXT_MAX_MS),
Setting(name='channel1_dir', type=str, required=True),
Setting(name='channel1_source',
type=str,
required=False,
default_value=''),
Setting(name='channel2_dir', type=str, required=True),
Setting(name='channel2_source',
type=str,
required=False,
default_value=''),
Setting(name='channel3_dir', type=str, required=True),
Setting(name='channel3_source',
type=str,
required=False,
default_value=''),
Setting(name='channel4_dir', type=str, required=True),
Setting(name='channel4_source',
type=str,
required=False,
default_value=''),
]
## Channel Properties Definition:
property_list = [
ChannelSourceDeviceProperty(name='channel1_input',
type=bool,
initial=Sample(timestamp=0,
value=False,
unit='bool'),
perms_mask=DPROP_PERM_GET,
options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name='channel2_input',
type=bool,
initial=Sample(timestamp=0,
value=False,
unit='bool'),
perms_mask=DPROP_PERM_GET,
options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name='channel3_input',
type=bool,
initial=Sample(timestamp=0,
value=False,
unit='bool'),
perms_mask=DPROP_PERM_GET,
options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name='channel4_input',
type=bool,
initial=Sample(timestamp=0,
value=False,
unit='bool'),
perms_mask=DPROP_PERM_GET,
options=DPROP_OPT_AUTOTIMESTAMP),
]
self.DIO_CONTROL_LINES = ["d0", "d1", "d2", "d3"]
self.INPUT_CHANNEL_TO_PIN = [0, 1, 2, 3]
self.DIO_MODE_INPUT = 3
self.DIO_MODE_OUTPUT_HIGH = 3
self.DIO_MODE_OUTPUT_LOW = 4
## Initialize the XBeeBase interface:
XBeeBase.__init__(self, self.__name, self.__core, settings_list,
property_list)
def __init__(self, name, core_services):
self.__name = name
self.__core = core_services
self.__tracer = get_tracer(name)
## Local State Variables:
self.__xbee_manager = None
self.offset = 520.0
self.__power_on_time = 0
# Settings
#
# xbee_device_manager: must be set to the name of an
# XBeeDeviceManager instance.
# extended_address: the extended address of the XBee device you
# would like to monitor.
# sample_rate_ms: the sample rate of the XBee SmartPlug.
# default_state: "On"/"Off"/"Same", if "On" the plug will default to
# being switched on.
# idle_off_seconds: Number of seconds to go by before forcing
# power off.
# If not set the value defauts to 0, which means
# the device never idles out.
# power_on_source: optional setting; string name of a Boolean
# "device.channel" to be used as the state. For
# example, if set to the name of a channel which
# changes value from False to True, the SmartPlug
# would change from being off to on.
# pf_adjustment: optional setting; floating point value between
# 0 and 1, that is used to adjust the current
# output given a known power factor.
# defaults to 1 (i.e no adjustment)
# Note: The unit cannot determine the pf,
# it is strictly a user supplied value.
# device_profile: optional setting; string value corresponding
# to a preset pf_adjustment value.
# These values are by not intended to be precise;
# they are only estimates.
# For a list of valid device_profile settings see the
# check_profiles() function in the driver source.
settings_list = [
Setting(
name='sample_rate_ms', type=int, required=False,
default_value=self.DEF_SAMPLE_MS,
verify_function=lambda x: x > 0 and x < 0xffff),
Setting(
name='default_state', type=str, required=False,
default_value=self.DEF_STATE,
parser=lambda s: s.lower(),
verify_function=lambda s: s in initial_states),
Setting(
name='idle_off_seconds', type=int, required=False,
default_value=self.DEF_IDLE_OFF,
verify_function=lambda x: x >= 0),
Setting(name="power_on_source", type=str, required=False),
Setting(name="pf_adjustment", type=float, required=False,
default_value=self.DEF_PF,
verify_function=lambda i:0 < i and i <= 1.0),
Setting(name="device_profile", type=str, required=False),
]
## Channel Properties Definition:
property_list = [
# gettable properties
ChannelSourceDeviceProperty(name="light", type=float,
initial=Sample(timestamp=0, unit="brightness", value=0.0),
perms_mask=DPROP_PERM_GET, options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="temperature", type=float,
initial=Sample(timestamp=0, unit="C", value=0.0),
perms_mask=DPROP_PERM_GET, options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="current", type=float,
initial=Sample(timestamp=0, unit="A", value=0.0),
perms_mask=DPROP_PERM_GET, options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="power_on", type=str,
initial=Sample(timestamp=0,
value=str(Boolean(True, style=STYLE_ONOFF))),
perms_mask=(DPROP_PERM_GET | DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=self.prop_set_power_control),
]
## Initialize the XBeeBase interface:
XBeeBase.__init__(self, self.__name, self.__core,
settings_list, property_list)
def __init__(self, name, core_services):
self.__name = name
self.__core = core_services
from core.tracing import get_tracer
self.__tracer = get_tracer(name)
## Local State Variables:
self.__xbee_manager = None
# Settings
#
# xbee_device_manager: must be set to the name of an XBeeDeviceManager
# instance.
# extended_address: the extended address of the XBee Sensor device you
# would like to monitor.
# sleep: True/False setting which determines if we should put the
# device to sleep between samples. Default: True
# sample_rate_ms: the sample rate of the XBee adapter. Default:
# 60,000 ms or one minute.
#
# Advanced settings:
#
# awake_time_ms: how long should the sensor stay awake after taking
# a sample? The default is 1000 ms.
# sample_predelay: how long should the sensor be awake for before taking
# its sample reading? This delay is used to allow the
# device's sensoring components to warm up before
# taking a sample. The default is 125ms.
# humidity_present: force a sensor which has not been detected to have
# humidity capability to having humidity capability
# present. Writes the devices DD device-type value
# as a side effect.
settings_list = [
Setting(
name='sleep', type=bool, required=False,
default_value=True),
Setting(
name='sample_rate_ms', type=int, required=True,
default_value=60000,
verify_function=lambda x: x >= 0 and x <= CYCLIC_SLEEP_EXT_MAX_MS),
# These settings are provided for advanced users, they
# are not required:
Setting(
name='awake_time_ms', type=int, required=False,
default_value=1000,
verify_function=lambda x: x >= 0 and x <= 0xffff),
Setting(
name='sample_predelay', type=int, required=False,
default_value=125,
verify_function=lambda x: x >= 0 and x <= 0xffff),
Setting(
name='humidity_present', type=bool, required=False,
default_value=False)
]
## Channel Properties Definition:
property_list = [
# gettable properties
ChannelSourceDeviceProperty(name="light", type=float,
initial=Sample(timestamp=0, value=0.0, unit="brightness"),
perms_mask=DPROP_PERM_GET, options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="temperature", type=float,
initial=Sample(timestamp=0, value=0.0, unit="C"),
perms_mask=DPROP_PERM_GET, options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="low_battery", type=bool,
initial=Sample(timestamp=0, value=False),
perms_mask=DPROP_PERM_GET, options=DPROP_OPT_AUTOTIMESTAMP),
]
## Initialize the XBeeBase interface:
XBeeBase.__init__(self, self.__name, self.__core,
settings_list, property_list)
def __init__(self, name, core_services):
self.__name = name
self.__core = core_services
## Local State Variables:
self.__xbee_manager = None
## Settings Table Definition:
settings_list = [
Setting(
name='sleep', type=bool, required=False,
default_value=True),
Setting(
name='sample_rate_ms', type=int, required=False,
default_value=400,
verify_function=lambda x: x >= 0 and x <= CYCLIC_SLEEP_EXT_MAX_MS),
Setting(
name='awake_time_ms', type=int, required=False,
default_value=5000,
verify_function=lambda x: x >= 0 and x <= 0xffff),
Setting(
name='sample_predelay', type=int, required=False,
default_value=125,
verify_function=lambda x: x >= 0 and x <= 0xffff),
Setting(
name='default_state1', type=str, required=False,
default_value="same",
parser=lambda s: s.lower(),
verify_function=lambda s: s in initial_states),
Setting(
name='default_state2', type=str, required=False,
default_value="off",
parser=lambda s: s.lower(),
verify_function=lambda s: s in initial_states),
Setting(
name='default_state3', type=str, required=False,
default_value="off",
parser=lambda s: s.lower(),
verify_function=lambda s: s in initial_states),
Setting(
name='idle_off_seconds', type=int, required=False,
default_value=0, verify_function=lambda x: x >= 0),
Setting(name='power_on_source1', type=str, required=False),
Setting(name='power_on_source2', type=str, required=False),
Setting(name='power_on_source3', type=str, required=False),
Setting(name='device_profile', type=str, required=False),
Setting(name='input_source', type=str, required=False, default_value=None),
]
## Channel Properties Definition:
property_list = [
# gettable properties
# ChannelSourceDeviceProperty(name="input", type=tuple,
# initial=Sample(timestamp=0, value=(0,None)),
# perms_mask=DPROP_PERM_SET | DPROP_PERM_GET,
# set_cb=self.prop_set_power_control1),
ChannelSourceDeviceProperty(name="activate", type=Boolean,
initial=Sample(timestamp=0,
value=Boolean(False, style=STYLE_ONOFF)),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=self.unlock),
ChannelSourceDeviceProperty(name="aa", type=str,
initial=Sample(timestamp=0, value="lock"),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET), options=DPROP_OPT_AUTOTIMESTAMP),
# settable properties
# ChannelSourceDeviceProperty(name="counter_reset", type=int,
# perms_mask=DPROP_PERM_SET,
# set_cb=self.prop_set_counter_reset),
]
## Initialize the XBeeBase interface:
XBeeBase.__init__(self, self.__name, self.__core,
settings_list, property_list)
def __init__(self, name, core_services, set_in=None, prop_in=None):
"""\
Initialize an XBee Wall Router instance.
Parameters:
* name - The name of the XBee Wall Router instance.
* core - The Core services instance.
* set_in - settings from a derived class
* prop_in - properties from a derived class
"""
# DeviceBase will create:
# self._name, self._core, self._tracer,
# XBeeBase will create:
# self._xbee_manager, self._extended_address
# Settings
#
# sleep: True/False setting which determines if we should put the
# device to sleep between samples.
# sleep_time_ms: If set for sleep, specifies the length of time that
# the module will sleep after a period of awake_time_ms
# each cycle.
# sample_rate_ms: If set, then value is loaded into IR to
# cause period data updated regardless of
# change. Also, if non-zero then samples are
# always updated (timestamp refreshed)
# even if there was no change.
# (Is Optional, defaults to 0/off, valid range 0-60000)
# power: True/False setting to enable/disable the power output
# on terminal 6 of the adapter.
# channel1_dir: Operating I/O mode for pin 1 of the adapter.
# Must be a string value comprised of one of the
# following:
# "In" - pin is configured to be an input.
# "Out" - pin is configured to be an output.
# channel2_dir: Operating I/O mode for pin 2 of the adapter.
# See channel1_dir for valid setting information.
# channel3_dir: Operating I/O mode for pin 3 of the adapter.
# See channel1_dir for valid setting information.
# channel4_dir: Operating I/O mode for pin 4 of the adapter.
# See channel1_dir for valid setting information.
# channel1_source: If channel1_dir is configured as an output, this
# option setting may be specified to a
# "device.channel" channel name. The Boolean value
# of this channel will specify to logic state for
# pin 1 on the adapter.
# channel2_source: Configures output value source channel for pin 2
# of the adapter.
# See channel1_source setting information.
# channel3_source: Configures output value source channel for pin 3
# of the adapter.
# See channel1_source setting information.
# channel4_source: Configures output value source channel for pin 4
# of the adapter.
# See channel1_source setting information.
# awake_time_ms: How many milliseconds should the device remain
# awake after waking from sleep.
# sample_predelay: How long, in milliseconds, to wait after waking
# up from sleep before taking a sample from the
# inputs.
# enable_low_battery: Force an adapter to enable support for
# battery-monitor pin.
# It should be only enabled if adapter is using
# internal batteries. Optional, Off by default.
settings_list = [
Setting(
name='sleep', type=Boolean, required=False,
default_value=Boolean(False)),
Setting(
name='sample_rate_ms', type=int, required=False,
default_value=0,
verify_function=lambda x: x == 0 or \
CYCLIC_SLEEP_MIN_MS <= x <= 60000),
Setting(
name='sleep_time_ms', type=int, required=False,
default_value=60000,
verify_function=lambda x: x >= 0 and \
x <= CYCLIC_SLEEP_EXT_MAX_MS),
Setting(
name='power', type=Boolean, required=False,
default_value=Boolean("On", STYLE_ONOFF)),
Setting(
name='channel1_dir', type=str, required=False,
default_value='In'),
Setting(
name='channel1_default', type=Boolean, required=False),
Setting(
name='channel1_source', type=str, required=False,
default_value=''),
Setting(
name='channel2_dir', type=str, required=False,
default_value='In'),
Setting(
name='channel2_default', type=Boolean, required=False),
Setting(
name='channel2_source', type=str, required=False,
default_value=''),
Setting(
name='channel3_dir', type=str, required=False,
default_value='In'),
Setting(
name='channel3_default', type=Boolean, required=False),
Setting(
name='channel3_source', type=str, required=False,
default_value=''),
Setting(
name='channel4_dir', type=str, required=False,
default_value='In'),
Setting(
name='channel4_default', type=Boolean, required=False),
Setting(
name='channel4_source', type=str, required=False,
default_value=''),
# This setting is provided for advanced users, it is not required:
Setting(
name='awake_time_ms', type=int, required=False,
default_value=5000,
verify_function=lambda x: x >= 0 and x <= 0xffff),
Setting(
name='sample_predelay', type=int, required=False,
default_value=1000,
verify_function=lambda x: x >= 0 and x <= 0xffff),
Setting(
name='enable_low_battery', type=Boolean, required=False,
default_value=Boolean("Off", STYLE_ONOFF)),
]
# Add our settings_list entries into the settings passed to us.
set_in = self.merge_settings(set_in, settings_list)
## Channel Properties Definition:
# This device hardware can monitor the state of its output
# pins. Therefore, there are always four input channels.
# The other properties and channels will be populated when we
# know the directions of our IO ports.
property_list = [
ChannelSourceDeviceProperty(
name=self.CHN_INPUT_NAME[0], type=bool,
initial=Sample(timestamp=0, value=False, unit='bool'),
perms_mask=DPROP_PERM_GET,
options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(
name=self.CHN_INPUT_NAME[1], type=bool,
initial=Sample(timestamp=0, value=False, unit='bool'),
perms_mask=DPROP_PERM_GET,
options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(
name=self.CHN_INPUT_NAME[2], type=bool,
initial=Sample(timestamp=0, value=False, unit='bool'),
perms_mask=DPROP_PERM_GET,
options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(
name=self.CHN_INPUT_NAME[3], type=bool,
initial=Sample(timestamp=0, value=False, unit='bool'),
perms_mask=DPROP_PERM_GET,
options=DPROP_OPT_AUTOTIMESTAMP),
]
# Add our property_list entries into the properties passed to us.
prop_in = self.merge_properties(prop_in, property_list)
## Initialize the XBeeBase interface:
XBeeBase.__init__(self, name, core_services, set_in, prop_in)
self._tracer.calls("XBeeDIO.__init__()")
def __init__(self, name, core_services):
self.__name = name
self.__core = core_services
## Local State Variables:
self.__xbee_manager = None
from core.tracing import get_tracer
self.__tracer = get_tracer(name)
## Settings Table Definition:
settings_list = [
Setting(
name = 'xbee_device_manager', type = str, required = False,
default_value = ''),
Setting(
name = 'extended_address', type = str, required = False,
default_value = ''),
Setting(
name='sleep_ms', type=int, required=False,
default_value=1000),
Setting(name="led1_source", type=str, required=False),
Setting(name="led2_source", type=str, required=False),
Setting(name="led3_source", type=str, required=False),
# This setting is provided for advanced users:
Setting(
name='awake_time_ms', type=int, required=False,
default_value=1500,
verify_function=lambda x: x >= 0 and x <= 0xffff),
]
## Channel Properties Definition:
property_list = [
# gettable properties
ChannelSourceDeviceProperty(name="sw1", type=bool,
initial=Sample(timestamp=0, value=False),
perms_mask=DPROP_PERM_GET, options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="sw2", type=bool,
initial=Sample(timestamp=0, value=False),
perms_mask=DPROP_PERM_GET, options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="sw3", type=bool,
initial=Sample(timestamp=0, value=False),
perms_mask=DPROP_PERM_GET, options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="sw4", type=bool,
initial=Sample(timestamp=0, value=False),
perms_mask=DPROP_PERM_GET, options=DPROP_OPT_AUTOTIMESTAMP),
# gettable and settable properties
ChannelSourceDeviceProperty(name="led1", type=Boolean,
initial=Sample(timestamp=0,
value=Boolean(False, style=STYLE_ONOFF)),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=lambda sample: self.prop_set_led("led1", sample)),
ChannelSourceDeviceProperty(name="led2", type=Boolean,
initial=Sample(timestamp=0,
value=Boolean(False, style=STYLE_ONOFF)),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=lambda sample: self.prop_set_led("led2", sample)),
ChannelSourceDeviceProperty(name="led3", type=Boolean,
initial=Sample(timestamp=0,
value=Boolean(False, style=STYLE_ONOFF)),
perms_mask=(DPROP_PERM_GET|DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=lambda sample: self.prop_set_led("led3", sample)),
]
## Initialize the XBeeBase interface:
XBeeBase.__init__(self, self.__name, self.__core,
settings_list, property_list)
def __init__(self, name, core_services):
self.__name = name
self.__core = core_services
self.parser = WirelessPacketParser()
self.trace = True
if self.trace:
print 'WirelessSensor(%s) init' % self.__name
## Local State Variables:
self.__xbee_manager = None
## Settings Table Definition:
settings_list = [
Setting(name = self.KEY_SAMPLE_RATE, type = int, required = False,
default_value = 60,
verify_function = lambda x: \
x >= 30 and \
x <= 525600 * 60),
Setting(name = self.parser.KEY_XMIT_PERIOD, type = dict, required = False,
default_value = {}),
Setting(name = self.parser.KEY_ALARM_EXIT, type = dict, required = False,
default_value = {}),
Setting(name = self.parser.KEY_TRIES, type = dict, required = False,
default_value = {}),
Setting(name = self.parser.KEY_HYSTERISIS, type = dict, required = False,
default_value = {}),
Setting(name = self.parser.KEY_LOG_PERIOD, type = dict, required = False,
default_value = {}),
Setting(name = self.parser.KEY_HI_VAL1, type = dict, required = False,
default_value = {}),
Setting(name = self.parser.KEY_HI_TIME1, type = dict, required = False,
default_value = {}),
Setting(name = self.parser.KEY_LO_VAL1, type = dict, required = False,
default_value = {}),
Setting(name = self.parser.KEY_LO_TIME1, type = dict, required = False,
default_value = {}),
Setting(name = self.parser.KEY_HI_VAL2, type = dict, required = False,
default_value = {}),
Setting(name = self.parser.KEY_HI_TIME2, type = dict, required = False,
default_value = {}),
Setting(name = self.parser.KEY_LO_VAL2, type = dict, required = False,
default_value = {}),
Setting(name = self.parser.KEY_LO_TIME2, type = dict, required = False,
default_value = {}),
]
## Channel Properties Definition:
property_list = [
# gettable properties
ChannelSourceDeviceProperty(name=self.KEY_CHANNEL + str(1), type=float,
initial=Sample(timestamp=0, value=-9223372036854775808.0, unit="units"),
perms_mask=DPROP_PERM_GET, options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name=self.KEY_CHANNEL + str(2), type=float,
initial=Sample(timestamp=0, value=-9223372036854775808.0, unit="units"),
perms_mask=DPROP_PERM_GET, options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name=self.KEY_CHANNEL + str(3), type=float,
initial=Sample(timestamp=0, value=-9223372036854775808.0, unit="units"),
perms_mask=DPROP_PERM_GET, options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name=self.KEY_CHANNEL + str(4), type=float,
initial=Sample(timestamp=0, value=-9223372036854775808.0, unit="units"),
perms_mask=DPROP_PERM_GET, options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name=self.KEY_ALARM, type=bool,
initial=Sample(timestamp=0, value=False),
perms_mask=DPROP_PERM_GET, options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name=self.KEY_BATTERY_COUNT, type=int,
initial=Sample(timestamp=0, value=0),
perms_mask=DPROP_PERM_GET, options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name=self.KEY_BATTERY_LOW, type=bool,
initial=Sample(timestamp=0, value=False),
perms_mask=DPROP_PERM_GET, options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name=self.KEY_DEVICE_ID, type=str,
initial=Sample(timestamp=0, value=''),
perms_mask=DPROP_PERM_GET, options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name=self.KEY_DOOR_OPEN, type=bool,
initial=Sample(timestamp=0, value=False),
perms_mask=DPROP_PERM_GET, options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name=self.KEY_ERROR, type=list,
initial=Sample(timestamp=0, value=[]),
perms_mask=DPROP_PERM_GET, options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name=self.KEY_LINE_POWERED, type=bool,
initial=Sample(timestamp=0, value=False),
perms_mask=DPROP_PERM_GET, options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name=self.KEY_LOCALLY_CONFIGURED, type=bool,
initial=Sample(timestamp=0, value=False),
perms_mask=DPROP_PERM_GET, options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name=self.KEY_PACKET_COUNT, type=int,
initial=Sample(timestamp=0, value=0),
perms_mask=DPROP_PERM_GET, options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name=self.KEY_REMAINING_BATT_PCT, type=float,
initial=Sample(timestamp=0, value=0.0),
perms_mask=DPROP_PERM_GET, options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name=self.KEY_SERIAL_NO, type=str,
initial=Sample(timestamp=0, value=''),
perms_mask=DPROP_PERM_GET, options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name=self.KEY_SERVICE_PRESSED, type=bool,
initial=Sample(timestamp=0, value=False),
perms_mask=DPROP_PERM_GET, options=DPROP_OPT_AUTOTIMESTAMP),
]
#set up the parser
self.parser = WirelessPacketParser()
#initialize packet cache
self.packetCache = None
self.packetCacheTimestamp = 0
## Initialize the XBeeBase interface:
XBeeBase.__init__(self, self.__name, self.__core,
settings_list, property_list)
def __init__(self, name, core_services):
# DeviceBase will create:
# self._name, self._core, self._tracer,
# XBeeBase will create:
# self._xbee_manager, self._extended_address
## XBeeBase manages these settings:
# xbee_device_manager: the name of an XBeeDeviceManager instance.
# extended_address: the extended address of the XBee device you
# would like to monitor.
## Local State Variables:
self._last_timestamp = 0
self.parser = WirelessPacketParser()
## Settings Table Definition:
settings_list = [
Setting(name = self.KEY_SAMPLE_RATE, type = int, required = False,
default_value = 60,
verify_function = lambda x: \
x >= 30 and \
x <= 525600 * 60),
Setting(name = self.parser.KEY_XMIT_PERIOD, type = dict, required = False,
default_value = {}),
Setting(name = self.parser.KEY_ALARM_EXIT, type = dict, required = False,
default_value = {}),
Setting(name = self.parser.KEY_TRIES, type = dict, required = False,
default_value = {}),
Setting(name = self.parser.KEY_HYSTERISIS, type = dict, required = False,
default_value = {}),
Setting(name = self.parser.KEY_LOG_PERIOD, type = dict, required = False,
default_value = {}),
Setting(name = self.parser.KEY_HI_VAL1, type = dict, required = False,
default_value = {}),
Setting(name = self.parser.KEY_HI_TIME1, type = dict, required = False,
default_value = {}),
Setting(name = self.parser.KEY_LO_VAL1, type = dict, required = False,
default_value = {}),
Setting(name = self.parser.KEY_LO_TIME1, type = dict, required = False,
default_value = {}),
Setting(name = self.parser.KEY_HI_VAL2, type = dict, required = False,
default_value = {}),
Setting(name = self.parser.KEY_HI_TIME2, type = dict, required = False,
default_value = {}),
Setting(name = self.parser.KEY_LO_VAL2, type = dict, required = False,
default_value = {}),
Setting(name = self.parser.KEY_LO_TIME2, type = dict, required = False,
default_value = {}),
]
## Channel Properties Definition:
property_list = [
# gettable properties
ChannelSourceDeviceProperty(name=self.KEY_CHANNEL + str(1),
type=float,
initial=Sample(
timestamp=0,
value=-9223372036854775808.0,
unit="units"),
perms_mask=DPROP_PERM_GET,
options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name=self.KEY_CHANNEL + str(2),
type=float,
initial=Sample(
timestamp=0,
value=-9223372036854775808.0,
unit="units"),
perms_mask=DPROP_PERM_GET,
options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name=self.KEY_CHANNEL + str(3),
type=float,
initial=Sample(
timestamp=0,
value=-9223372036854775808.0,
unit="units"),
perms_mask=DPROP_PERM_GET,
options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name=self.KEY_CHANNEL + str(4),
type=float,
initial=Sample(
timestamp=0,
value=-9223372036854775808.0,
unit="units"),
perms_mask=DPROP_PERM_GET,
options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name=self.KEY_ALARM,
type=bool,
initial=Sample(timestamp=0,
value=False),
perms_mask=DPROP_PERM_GET,
options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name=self.KEY_BATTERY_COUNT,
type=int,
initial=Sample(timestamp=0, value=0),
perms_mask=DPROP_PERM_GET,
options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name=self.KEY_BATTERY_LOW,
type=bool,
initial=Sample(timestamp=0,
value=False),
perms_mask=DPROP_PERM_GET,
options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name=self.KEY_DEVICE_ID,
type=str,
initial=Sample(timestamp=0, value=''),
perms_mask=DPROP_PERM_GET,
options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name=self.KEY_DOOR_OPEN,
type=bool,
initial=Sample(timestamp=0,
value=False),
perms_mask=DPROP_PERM_GET,
options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name=self.KEY_ERROR,
type=list,
initial=Sample(timestamp=0, value=[]),
perms_mask=DPROP_PERM_GET,
options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name=self.KEY_LINE_POWERED,
type=bool,
initial=Sample(timestamp=0,
value=False),
perms_mask=DPROP_PERM_GET,
options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name=self.KEY_LOCALLY_CONFIGURED,
type=bool,
initial=Sample(timestamp=0,
value=False),
perms_mask=DPROP_PERM_GET,
options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name=self.KEY_PACKET_COUNT,
type=int,
initial=Sample(timestamp=0, value=0),
perms_mask=DPROP_PERM_GET,
options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name=self.KEY_REMAINING_BATT_PCT,
type=float,
initial=Sample(timestamp=0, value=0.0),
perms_mask=DPROP_PERM_GET,
options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name=self.KEY_SERIAL_NO,
type=str,
initial=Sample(timestamp=0, value=''),
perms_mask=DPROP_PERM_GET,
options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name=self.KEY_SERVICE_PRESSED,
type=bool,
initial=Sample(timestamp=0,
value=False),
perms_mask=DPROP_PERM_GET,
options=DPROP_OPT_AUTOTIMESTAMP),
]
#initialize packet cache
self.packetCache = None
self.packetCacheTimestamp = 0
## Initialize the XBeeBase interface:
XBeeBase.__init__(self, name, core_services, settings_list,
property_list)
self._tracer.calls('WirelessSensor init')
def __init__(self, name, core_services, set_in=None, prop_in=None):
# DeviceBase will create:
# self._name, self._core, self._tracer,
# XBeeBase will create:
# self._xbee_manager, self._extended_address
## XBeeBase manages these settings:
# xbee_device_manager: the name of an XBeeDeviceManager instance.
# extended_address: the extended address of the XBee device you
# would like to monitor.
## Local State Variables:
self._last_timestamp = 0
self.offset = 520.0
self.__power_on_time = 0
# Settings
#
# xbee_device_manager: must be set to the name of an
# XBeeDeviceManager instance.
# extended_address: the extended address of the XBee device you
# would like to monitor.
# sample_rate_ms: the sample rate of the XBee SmartPlug.
# default_state: "On"/"Off"/"Same", if "On" the plug will default to
# being switched on.
# idle_off_seconds: Number of seconds to go by before forcing
# power off.
# If not set the value defauts to 0, which means
# the device never idles out.
# power_on_source: optional setting; string name of a Boolean
# "device.channel" to be used as the state. For
# example, if set to the name of a channel which
# changes value from False to True, the SmartPlug
# would change from being off to on.
# pf_adjustment: optional setting; floating point value between
# 0 and 1, that is used to adjust the current
# output given a known power factor.
# defaults to 1 (i.e no adjustment)
# Note: The unit cannot determine the pf,
# it is strictly a user supplied value.
# device_profile: optional setting; string value corresponding
# to a preset pf_adjustment value.
# These values are by not intended to be precise;
# they are only estimates.
# For a list of valid device_profile settings see the
# check_profiles() function in the driver source.
settings_list = [
Setting(name='sample_rate_ms',
type=int,
required=False,
default_value=self.DEF_SAMPLE_MS,
verify_function=lambda x: x > 0 and x < 0xffff),
Setting(name='default_state',
type=str,
required=False,
default_value=self.DEF_STATE,
parser=lambda s: s.lower(),
verify_function=lambda s: s in initial_states),
Setting(name='idle_off_seconds',
type=int,
required=False,
default_value=self.DEF_IDLE_OFF,
verify_function=lambda x: x >= 0),
Setting(name="power_on_source", type=str, required=False),
Setting(name="pf_adjustment",
type=float,
required=False,
default_value=self.DEF_PF,
verify_function=lambda i: 0 < i and i <= 1.0),
Setting(name="device_profile", type=str, required=False),
Setting(name="degf",
type=bool,
required=False,
default_value=self.DEF_DEGF),
]
# Add our settings_list entries into the settings passed to us.
set_in = self.merge_settings(set_in, settings_list)
## Channel Properties Definition:
property_list = [
# gettable properties
ChannelSourceDeviceProperty(name="light",
type=float,
initial=Sample(timestamp=0,
unit="brightness",
value=0.0),
perms_mask=DPROP_PERM_GET,
options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="temperature",
type=float,
initial=Sample(timestamp=0,
unit="C",
value=0.0),
perms_mask=DPROP_PERM_GET,
options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(name="current",
type=float,
initial=Sample(timestamp=0,
unit="A",
value=0.0),
perms_mask=DPROP_PERM_GET,
options=DPROP_OPT_AUTOTIMESTAMP),
ChannelSourceDeviceProperty(
name="power_on",
type=str,
initial=Sample(timestamp=0,
value=str(Boolean(True, style=STYLE_ONOFF))),
perms_mask=(DPROP_PERM_GET | DPROP_PERM_SET),
options=DPROP_OPT_AUTOTIMESTAMP,
set_cb=self.prop_set_power_control),
]
# Add our property_list entries into the properties passed to us.
prop_in = self.merge_properties(prop_in, property_list)
## Initialize the XBeeBase interface:
XBeeBase.__init__(self, name, core_services, set_in, prop_in)
self._tracer.calls("XBeeRPM.__init__()")