class NvmeFault(ServerFillUp):
# pylint: disable=too-many-ancestors
"""
Test Class Description: To validate IO works fine when NVMe fault generated
on single or multiple servers with single drive.
:avocado: recursive
"""
def setUp(self):
"""Set up for test case."""
super().setUp()
self.no_of_pools = self.params.get("number_of_pools", '/run/pool/*', 1)
self.capacity = self.params.get("percentage",
'/run/faulttests/pool_capacity/*')
self.no_of_servers = self.params.get(
"count", '/run/faulttests/no_of_servers/*/')
self.no_of_drives = self.params.get("count",
'/run/faulttests/no_of_drives/*/')
self.dmg = DmgCommand(os.path.join(self.prefix, "bin"))
self.dmg.get_params(self)
self.dmg.insecure.update(
self.server_managers[0].get_config_value("allow_insecure"),
"dmg.insecure")
#Set to True to generate the NVMe fault during IO
self.set_faulty_device = True
def test_nvme_fault(self):
"""Jira ID: DAOS-4722.
Test Description: Test NVMe disk fault.
Use Case: Create the large size of pool and start filling up the pool.
while IO is in progress remove single disks from
single/multiple servers.
:avocado: tags=all,hw,medium,nvme,ib2,nvme_fault,full_regression
"""
#Create the Pool with Maximum NVMe size
self.create_pool_max_size(nvme=True)
#Start the IOR Command and generate the NVMe fault.
self.start_ior_load(percent=self.capacity)
print("pool_percentage_used -- After -- {}".format(
self.pool.pool_percentage_used()))
#Check nvme-health command works
try:
self.dmg.hostlist = self.hostlist_servers
self.dmg.storage_scan_nvme_health()
except CommandFailure as _error:
self.fail("dmg storage scan --nvme-health failed")
class NvmeHealth(ServerFillUp):
# pylint: disable=too-many-ancestors
"""
Test Class Description: To validate NVMe health test cases
:avocado: recursive
"""
def test_monitor_for_large_pools(self):
"""Jira ID: DAOS-4722.
Test Description: Test Health monitor for large number of pools.
Use Case: This tests will create the 40 number of pools and verify the
dmg list-pools, device-health and nvme-health works for all
pools.
:avocado: tags=all,full_regression
:avocado: tags=hw,medium
:avocado: tags=nvme
:avocado: tags=nvme_health
"""
# pylint: disable=attribute-defined-outside-init
# pylint: disable=too-many-branches
no_of_pools = self.params.get("number_of_pools", '/run/pool/*')
pool_capacity = self.params.get("pool_used_percentage", '/run/pool/*')
pool_capacity = pool_capacity / 100
storage = self.get_max_storage_sizes()
#Create the pool from available of storage space
single_pool_nvme_size = int((storage[1] * pool_capacity) / no_of_pools)
single_pool_scm_size = int((storage[0] * pool_capacity) / no_of_pools)
self.pool = []
# Create the Large number of pools
for _pool in range(no_of_pools):
self.log.info("-- Creating pool number = %s", _pool)
self.pool.append(self.get_pool(create=False))
self.pool[-1].scm_size.update(single_pool_scm_size, "scm_size")
self.pool[-1].nvme_size.update(single_pool_nvme_size, "nvme_size")
self.pool[-1].create()
# initialize the dmg command
self.dmg = DmgCommand(os.path.join(self.prefix, "bin"))
self.dmg.get_params(self)
self.dmg.insecure.update(
self.server_managers[0].get_config_value("allow_insecure"),
"dmg.insecure")
# List all pools
self.dmg.set_sub_command("storage")
self.dmg.sub_command_class.set_sub_command("query")
self.dmg.sub_command_class.sub_command_class.set_sub_command(
"list-pools")
for host in self.hostlist_servers:
self.dmg.hostlist = host
try:
result = self.dmg.run()
except CommandFailure as error:
self.fail("dmg command failed: {}".format(error))
#Verify all pools UUID listed as part of query
for pool in self.pool:
if pool.uuid.lower() not in result.stdout_text:
self.fail('Pool uuid {} not found in smd query'.format(
pool.uuid.lower()))
# Get the device ID from all the servers.
device_ids = get_device_ids(self.dmg, self.hostlist_servers)
# Get the device health
for host in device_ids:
self.dmg.hostlist = host
for _dev in device_ids[host]:
try:
result = self.dmg.storage_query_device_health(_dev)
except CommandFailure as error:
self.fail("dmg get device states failed {}".format(error))
if 'State:NORMAL' not in result.stdout_text:
self.fail("device {} on host {} is not NORMAL".format(
_dev, host))
# Get the nvme-health
try:
self.dmg.storage_scan_nvme_health()
except CommandFailure as error:
self.fail("dmg storage scan --nvme-health failed {}".format(error))
class NvmeHealth(ServerFillUp):
# pylint: disable=too-many-ancestors
"""
Test Class Description: To validate NVMe health test cases
:avocado: recursive
"""
@skipForTicket("DAOS-7011")
def test_monitor_for_large_pools(self):
"""Jira ID: DAOS-4722.
Test Description: Test Health monitor for large number of pools.
Use Case: This tests will create the 40 number of pools and verify the
dmg list-pools, device-health and nvme-health works for all
pools.
:avocado: tags=all,hw,medium,nvme,ib2,full_regression
:avocado: tags=nvme_health
"""
# pylint: disable=attribute-defined-outside-init
# pylint: disable=too-many-branches
no_of_pools = self.params.get("number_of_pools", '/run/pool/*')
# Stop the servers to run SPDK too to get the server capacity
self.stop_servers()
storage = self.get_nvme_max_capacity()
self.start_servers()
# Create the pool from 80% of available of storage space
single_pool_nvme_size = int((storage * 0.80) / no_of_pools)
self.pool = []
# Create the Large number of pools
for _pool in range(no_of_pools):
pool = TestPool(self.context, self.get_dmg_command())
pool.get_params(self)
# SCM size is 10% of NVMe
pool.scm_size.update('{}'.format(int(single_pool_nvme_size *
0.10)))
pool.nvme_size.update('{}'.format(single_pool_nvme_size))
pool.create()
self.pool.append(pool)
# initialize the dmg command
self.dmg = DmgCommand(os.path.join(self.prefix, "bin"))
self.dmg.get_params(self)
self.dmg.insecure.update(
self.server_managers[0].get_config_value("allow_insecure"),
"dmg.insecure")
# List all pools
self.dmg.set_sub_command("storage")
self.dmg.sub_command_class.set_sub_command("query")
self.dmg.sub_command_class.sub_command_class.set_sub_command(
"list-pools")
for host in self.hostlist_servers:
self.dmg.hostlist = host
try:
result = self.dmg.run()
except CommandFailure as error:
self.fail("dmg command failed: {}".format(error))
#Verify all pools UUID listed as part of query
for pool in self.pool:
if pool.uuid.lower() not in result.stdout_text:
self.fail('Pool uuid {} not found in smd query'.format(
pool.uuid.lower()))
# Get the device ID from all the servers.
device_ids = get_device_ids(self.dmg, self.hostlist_servers)
# Get the device health
for host in device_ids:
self.dmg.hostlist = host
for _dev in device_ids[host]:
try:
result = self.dmg.storage_query_device_health(_dev)
except CommandFailure as error:
self.fail("dmg get device states failed {}".format(error))
if 'State:NORMAL' not in result.stdout_text:
self.fail("device {} on host {} is not NORMAL".format(
_dev, host))
# Get the nvme-health
try:
self.dmg.storage_scan_nvme_health()
except CommandFailure as error:
self.fail("dmg storage scan --nvme-health failed {}".format(error))
