def __init__(self):
""" Create lister and launch bg listening
"""
XplPlugin.__init__(self, name = 'zibase')
self._config = Query(self.myxpl, self.log)
self.address = self._config.query('zibase', 'ip')
self.inter = self._config.query('zibase', 'interface')
self.port = int(self._config.query('zibase', 'port'))
self.valvar=self._config.query('zibase', 'envar')
self.interv=int(self._config.query('zibase', 'interv'))
self.log.info("Creating listener for ZiBase")
Listener(self.zibase_command, self.myxpl, {'schema': 'zibase.basic',
'xpltype': 'xpl-cmnd'})
try:
self.ip_host=get_ip_address(self.inter)
self.log.debug("Adress IP Host=%s" % (self.ip_host))
except:
self.log.error("IP Host not found=%s" % (traceback.format_exc()))
return
try:
self.api = APIZiBase(self.log,self.address)
except:
self.log.error("API ZiBase error=%s" % (traceback.format_exc()))
return
try:
self.th=ServerZiBase(self.log,self.ip_host,self.port,self.myxpl)
self.th.start()
except:
self.log.error("Server ZiBase error=%s" % (traceback.format_exc()))
self.stop()
try:
self.api.Connect(self.ip_host,self.port)
except:
self.log.error("Connection ZiBase error=%s" % (traceback.format_exc()))
self.stop()
if self.valvar=="True" :
try:
self.log.info("Start reading internal variables")
var_read=XplTimer(self.interv,self.zibase_read_var,self.myxpl)
var_read.start()
except:
self.log.error("reading internal variables error")
return
self.add_stop_cb(self.stop)
self.enable_hbeat()
self.log.info("Plugin ready :)")
def __init__(self):
""" Create lister and launch bg listening
"""
XplPlugin.__init__(self, name='zibase')
self._config = Query(self.myxpl, self.log)
self.address = self._config.query('zibase', 'ip')
self.inter = self._config.query('zibase', 'interface')
self.port = int(self._config.query('zibase', 'port'))
self.valvar = self._config.query('zibase', 'envar')
self.interv = int(self._config.query('zibase', 'interv'))
self.log.info("Creating listener for ZiBase")
Listener(self.zibase_command, self.myxpl, {
'schema': 'zibase.basic',
'xpltype': 'xpl-cmnd'
})
try:
self.ip_host = get_ip_address(self.inter)
self.log.debug("Adress IP Host=%s" % (self.ip_host))
except:
self.log.error("IP Host not found=%s" % (traceback.format_exc()))
return
try:
self.api = APIZiBase(self.log, self.address)
except:
self.log.error("API ZiBase error=%s" % (traceback.format_exc()))
return
try:
self.th = ServerZiBase(self.log, self.ip_host, self.port,
self.myxpl)
self.th.start()
except:
self.log.error("Server ZiBase error=%s" % (traceback.format_exc()))
self.stop()
try:
self.api.Connect(self.ip_host, self.port)
except:
self.log.error("Connection ZiBase error=%s" %
(traceback.format_exc()))
self.stop()
if self.valvar == "True":
try:
self.log.info("Start reading internal variables")
var_read = XplTimer(self.interv, self.zibase_read_var,
self.myxpl)
var_read.start()
except:
self.log.error("reading internal variables error")
return
self.add_stop_cb(self.stop)
self.enable_hbeat()
self.log.info("Plugin ready :)")
class ZiBaseMain(XplPlugin):
'''Manage ZiBase
'''
def __init__(self):
""" Create lister and launch bg listening
"""
XplPlugin.__init__(self, name = 'zibase')
self._config = Query(self.myxpl, self.log)
self.address = self._config.query('zibase', 'ip')
self.inter = self._config.query('zibase', 'interface')
self.port = int(self._config.query('zibase', 'port'))
self.valvar=self._config.query('zibase', 'envar')
self.interv=int(self._config.query('zibase', 'interv'))
self.log.info("Creating listener for ZiBase")
Listener(self.zibase_command, self.myxpl, {'schema': 'zibase.basic',
'xpltype': 'xpl-cmnd'})
try:
self.ip_host=get_ip_address(self.inter)
self.log.debug("Adress IP Host=%s" % (self.ip_host))
except:
self.log.error("IP Host not found=%s" % (traceback.format_exc()))
return
try:
self.api = APIZiBase(self.log,self.address)
except:
self.log.error("API ZiBase error=%s" % (traceback.format_exc()))
return
try:
self.th=ServerZiBase(self.log,self.ip_host,self.port,self.myxpl)
self.th.start()
except:
self.log.error("Server ZiBase error=%s" % (traceback.format_exc()))
self.stop()
try:
self.api.Connect(self.ip_host,self.port)
except:
self.log.error("Connection ZiBase error=%s" % (traceback.format_exc()))
self.stop()
if self.valvar=="True" :
try:
self.log.info("Start reading internal variables")
var_read=XplTimer(self.interv,self.zibase_read_var,self.myxpl)
var_read.start()
except:
self.log.error("reading internal variables error")
return
self.add_stop_cb(self.stop)
self.enable_hbeat()
self.log.info("Plugin ready :)")
def zibase_command(self, message):
""" Call zibase lib function in function of given xpl message
@param message : xpl message
"""
commands = {
'off': 0,
'on': 1,
'preset-dim' : 2,
}
protocols = {
'PRESET': 0,
'VISONIC433' : 1,
'VISONIC868' : 2,
'CHACON' : 3,
'DOMIA' : 4,
'X10' : 5,
'ZWAVE' : 6,
'RFS10' : 7,
'XDD433AL' : 8,
'XDD868AL' : 9,
'XDD868INSH' : 10,
'XDD868PILOT' : 11,
'XDD868BOAC' : 12,
}
cmd = None
dev = None
protocol = None
preset_dim = 0
if 'command' in message.data:
cmd = message.data['command']
if 'device' in message.data:
chaine=message.data['device'].split(':')
try:
dev = chaine[0].upper()
protocol=chaine[1].upper()
except:
self.log.error("Syntax device not valid")
if 'preset-dim' in message.data:
preset_dim=message.data['preset-dim']
self.log.debug(message.data)
if protocol == None :
self.log.warning("Protocol not specified")
return
else:
self.log.debug("%s received : device = %s protocol = %s number protocol=%s preset=%s" % (cmd, dev, protocol, protocols[protocol],str(preset_dim)))
try:
self.api.sendCommand(dev, commands[cmd], protocols[protocol],int(preset_dim))
except:
self.log.error("Sendcommand error")
return
self.th.send_xpl_cmd(message.data['device'], cmd, preset_dim)
def stop(self):
self.log.debug("Stop plugin in progress...")
self.var_read.stop()
self.api.Disconnect(self.ip_host,self.port)
self.th.stop()
return
def zibase_read_var(self):
try:
datas=self.api.getVariables()
for data in datas:
elmt=data.split(':')
stats=['sta:' + elmt[1]]
self.th.send_xpl_sensor(stats,elmt[0],'xpl-stat')
except:
self.log.error("Read var error=%s" % (traceback.format_exc()))
class ZiBaseMain(XplPlugin):
'''Manage ZiBase
'''
def __init__(self):
""" Create lister and launch bg listening
"""
XplPlugin.__init__(self, name='zibase')
self._config = Query(self.myxpl, self.log)
self.address = self._config.query('zibase', 'ip')
self.inter = self._config.query('zibase', 'interface')
self.port = int(self._config.query('zibase', 'port'))
self.valvar = self._config.query('zibase', 'envar')
self.interv = int(self._config.query('zibase', 'interv'))
self.log.info("Creating listener for ZiBase")
Listener(self.zibase_command, self.myxpl, {
'schema': 'zibase.basic',
'xpltype': 'xpl-cmnd'
})
try:
self.ip_host = get_ip_address(self.inter)
self.log.debug("Adress IP Host=%s" % (self.ip_host))
except:
self.log.error("IP Host not found=%s" % (traceback.format_exc()))
return
try:
self.api = APIZiBase(self.log, self.address)
except:
self.log.error("API ZiBase error=%s" % (traceback.format_exc()))
return
try:
self.th = ServerZiBase(self.log, self.ip_host, self.port,
self.myxpl)
self.th.start()
except:
self.log.error("Server ZiBase error=%s" % (traceback.format_exc()))
self.stop()
try:
self.api.Connect(self.ip_host, self.port)
except:
self.log.error("Connection ZiBase error=%s" %
(traceback.format_exc()))
self.stop()
if self.valvar == "True":
try:
self.log.info("Start reading internal variables")
var_read = XplTimer(self.interv, self.zibase_read_var,
self.myxpl)
var_read.start()
except:
self.log.error("reading internal variables error")
return
self.add_stop_cb(self.stop)
self.enable_hbeat()
self.log.info("Plugin ready :)")
def zibase_command(self, message):
""" Call zibase lib function in function of given xpl message
@param message : xpl message
"""
commands = {
'off': 0,
'on': 1,
'preset-dim': 2,
}
protocols = {
'PRESET': 0,
'VISONIC433': 1,
'VISONIC868': 2,
'CHACON': 3,
'DOMIA': 4,
'X10': 5,
'ZWAVE': 6,
'RFS10': 7,
'XDD433AL': 8,
'XDD868AL': 9,
'XDD868INSH': 10,
'XDD868PILOT': 11,
'XDD868BOAC': 12,
}
cmd = None
dev = None
protocol = None
preset_dim = 0
if 'command' in message.data:
cmd = message.data['command']
if 'device' in message.data:
chaine = message.data['device'].split(':')
try:
dev = chaine[0].upper()
protocol = chaine[1].upper()
except:
self.log.error("Syntax device not valid")
if 'preset-dim' in message.data:
preset_dim = message.data['preset-dim']
self.log.debug(message.data)
if protocol == None:
self.log.warning("Protocol not specified")
return
else:
self.log.debug(
"%s received : device = %s protocol = %s number protocol=%s preset=%s"
% (cmd, dev, protocol, protocols[protocol], str(preset_dim)))
try:
self.api.sendCommand(dev, commands[cmd], protocols[protocol],
int(preset_dim))
except:
self.log.error("Sendcommand error")
return
self.th.send_xpl_cmd(message.data['device'], cmd, preset_dim)
def stop(self):
self.log.debug("Stop plugin in progress...")
self.var_read.stop()
self.api.Disconnect(self.ip_host, self.port)
self.th.stop()
return
def zibase_read_var(self):
try:
datas = self.api.getVariables()
for data in datas:
elmt = data.split(':')
stats = ['sta:' + elmt[1]]
self.th.send_xpl_sensor(stats, elmt[0], 'xpl-stat')
except:
self.log.error("Read var error=%s" % (traceback.format_exc()))
