def SetupHidThread(self, newDevicePath):
#create thread
self.thread = HIDThread(self.vendorString + " " + self.productString,
newDevicePath)
self.thread.start()
self.thread.SetStopCallback(self.StopCallback)
self.thread.SetRawCallback(self.RawCallback)
def SetupHidThread(self, newDevicePath):
#create thread
self.thread = HIDThread(self.name, newDevicePath, self.name)
self.thread.SetStopCallback(self.StopCallback)
self.thread.SetRawCallback(self.RawCallback)
self.thread.start()
self.thread.WaitForInit()
self.RequestVersion()
def SetupHidThread(self, newDevicePath):
#create thread
thread = HIDThread(self.name, newDevicePath, self.name)
thread.SetStopCallback(self.StopCallback)
thread.SetRawCallback(self.RawCallback)
thread.start()
thread.WaitForInit()
self.thread = thread
self.RequestVersion()
def SetupHidThread(self, newDevicePath):
#create thread
self.thread = HIDThread(self.vendorString + " " + self.productString, newDevicePath)
self.thread.start()
self.thread.SetStopCallback(self.StopCallback)
if self.rawDataEvents:
self.thread.SetRawCallback(self.RawCallback)
else:
self.thread.SetButtonCallback(self.ButtonCallback)
self.thread.SetValueCallback(self.ValueCallback)
def SetupHidThread(self, newDevicePath):
#create thread
self.thread = HIDThread(
self.vendorString + " " + self.productString, newDevicePath
)
self.thread.start()
self.thread.SetStopCallback(self.StopCallback)
self.thread.SetRawCallback(self.RawCallback)
def SetupHidThread(self, newDevicePath):
#create thread
self.thread = HIDThread(self.vendorString + " " + self.productString, newDevicePath)
self.thread.start()
self.thread.SetStopCallback(self.StopCallback)
if self.rawDataEvents:
self.thread.SetRawCallback(self.RawCallback)
else:
self.thread.SetButtonCallback(self.ButtonCallback)
self.thread.SetValueCallback(self.ValueCallback)
class HIDPS3(eg.PluginClass):
def __init__(self):
self.text = Text
self.thread = None
self.PS3Remote = PS3Remote
self.batteryLevel = None
self.AddAction(GetBatteryLevel)
self.AddAction(SavePower)
def RawCallback(self, data):
#hexdata= binascii.hexlify(data).upper()
#eg.PrintNotice( hexdata )
try:
if len(data) != 12:
raise PS3ParseError( 'length', 12, len(data) )
start= ord( data[0] )
mask= ord( data[1] )<<16 | ord( data[2] )<<8 | ord( data[3] )
code= ord( data[4] )
dummy= data[5:10]
state= ord( data[10] )
battery= ord( data[11] )
if start != 0x01:
raise PS3ParseError( 'data[0]', '0x01', hex(start) )
if dummy != "\xff\xff\xff\xff\xff":
raise PS3ParseError( 'data[5:10]', '0xffffffffff', hex(dummy) )
if battery > 0x05:
raise PS3ParseError( 'battery level', '0-5', battery )
if( battery < 0x02 ):
eg.PrintNotice(
'PS3 Remote: Battery Level: ' +
self.text.batteryLevel[battery]
)
#self.TriggerEvent(
# 'Code: ' + hex(code) +
# ' State: ' + hex(state) +
# ' Battery Level: ' + str(battery) + ':' +
# self.text.batteryLevel[battery] +
# ' Mask: ' + bin(mask),
# payload= ( battery, self.text.batteryLevel[battery] )
#)
if( code != 0xff and code not in self.PS3Remote.button ):
raise PS3ParseError( 'Key code', 'various', hex(code) )
# disable power-save mode
PowerSave.disable(BD_ADDR)
btnPressed = []
if( code != 0xff ):
# single button pressed
btnPressed.append( self.PS3Remote.button[code] )
else:
# multiple buttons pressed
if( mask != 0x00 ):
for bit in range( 24 ):
if( mask & 1<<bit ):
if( bit not in self.PS3Remote.maskbit ):
PS3ParseError( 'Mask', 'various', bin(mask) )
btnPressed.append( self.PS3Remote.maskbit[bit] )
if btnPressed == []:
PS3ParseError( 'Mask', 'various','Empty Mask' )
if btnPressed != []:
evtName = 'Button.' + '+'.join(btnPressed)
if self.enduringEvents:
self.TriggerEnduringEvent(evtName)
else:
self.TriggerEvent(evtName)
elif self.enduringEvents:
#no buttons pressed anymore
self.EndLastEvent()
elif self.ps3Release:
#trigger event so that releasing all buttons
#can get noticed even w/o enduring events
self.TriggerEvent( 'Button.None' )
self.batteryLevel= battery
except PS3ParseError as catchedError:
eg.PrintError(
'PS3-HID Plugin: ' + catchedError +
' Data: 0x' + binascii.hexlify(data).lower()
)
def StopCallback(self):
self.TriggerEvent("Stopped")
self.thread = None
def GetMyDevicePath(self):
path = GetDevicePath(
self.devicePath,
self.vendorID,
self.productID,
self.versionNumber,
self.useDeviceIndex,
self.deviceIndex,
self.noOtherPort)
return path;
def SetupHidThread(self, newDevicePath):
#create thread
self.thread = HIDThread(
self.vendorString + " " + self.productString, newDevicePath
)
self.thread.start()
self.thread.SetStopCallback(self.StopCallback)
self.thread.SetRawCallback(self.RawCallback)
def ReconnectDevice(self, event):
"""method to reconnect a disconnect device"""
if self.thread == None:
#updating device list
#check if the right device was connected
#getting devicePath
newDevicePath = self.GetMyDevicePath()
if not newDevicePath:
#wrong device
return
self.SetupHidThread(newDevicePath)
def GetLabel(self,
eventName,
enduringEvents,
rawDataEvents,
ps3DataEvents,
ps3Release,
ps3Zone,
shortKeyTime,
longKeyTime,
sleepTime,
hibernateTime,
noOtherPort,
devicePath,
vendorID,
vendorString,
productID,
productString,
versionNumber,
# For backwards-compatibility with 2.0.2 and 3.0.0 - if a new config option is added this can just be replaced
dummy = None,
useDeviceIndex = False,
deviceIndex = 0
):
prefix = "PS3: "
#one or both strings empty should not happen
if not vendorString or not productString:
return "PS3"
#productString already contains manufacturer or vendor id only
if productString.find(vendorString) != -1 or\
vendorString[0:len(self.text.vendorID)] == self.text.vendorID:
return prefix + productString
return prefix + vendorString + " " + productString
def __start__(self,
eventName,
enduringEvents,
rawDataEvents,
ps3DataEvents,
ps3Release,
ps3Zone,
shortKeyTime,
longKeyTime,
sleepTime,
hibernateTime,
noOtherPort,
devicePath,
vendorID,
vendorString,
productID,
productString,
versionNumber,
# For backwards-compatibility with 2.0.2 and 3.0.0 - if a new config option is added this can just be replaced
dummy = None,
useDeviceIndex = False,
deviceIndex = 0
):
#saving parameters so they can be used to reconnect a device
self.eventName = eventName
self.enduringEvents = enduringEvents
self.noOtherPort = noOtherPort
self.devicePath = devicePath
self.vendorID = vendorID
self.vendorString = vendorString
self.productID = productID
self.productString = productString
self.versionNumber = versionNumber
self.useDeviceIndex = useDeviceIndex
self.deviceIndex = deviceIndex
self.ps3Release = ps3Release
self.oldValues = {}
if eventName:
self.info.eventPrefix = eventName
else:
self.info.eventPrefix = "PS3"
#Bind plug in to RegisterDeviceNotification message
eg.Bind("System.DeviceAttached", self.ReconnectDevice)
newDevicePath = self.GetMyDevicePath()
if not newDevicePath:
#device not found
self.PrintError(Text.errorFind)
else:
self.SetupHidThread(newDevicePath)
def __stop__(self):
if self.thread:
self.thread.AbortThread()
#unbind from RegisterDeviceNotification message
eg.Unbind("System.DeviceAttached", self.ReconnectDevice)
def Configure(self,
eventName = "",
enduringEvents = True,
rawDataEvents = False, # no longer used
ps3DataEvents = False, # no longer used
ps3Release = False,
ps3Zone = False, # no longer used
shortKeyTime = 0.0, # no longer used
longKeyTime = 0.0, # no longer used
sleepTime = 5.0,
hibernateTime = 60.0,
noOtherPort = False,
devicePath = None,
vendorID = None,
vendorString = None,
productID = None,
productString = None,
versionNumber = None,
# For backwards-compatibility with 2.0.2 and 3.0.0 - if a new config option is added this can just be replaced
dummy = None,
useDeviceIndex = False,
deviceIndex = 0
):
deviceList = GetDeviceDescriptions()
panel = eg.ConfigPanel(self, resizable=True)
#building dialog
hidList = wx.ListCtrl(panel, -1, pos=wx.DefaultPosition,
size=wx.DefaultSize, style=wx.LC_REPORT | wx.LC_SINGLE_SEL)
#create GUI
hidList.InsertColumn(0, self.text.deviceName)
hidList.InsertColumn(1, self.text.manufacturer)
hidList.InsertColumn(2, self.text.connected)
path = GetDevicePath(
devicePath,
vendorID,
productID,
versionNumber,
noOtherPort,
useDeviceIndex,
deviceIndex,
deviceList)
#fill list
devices = {}
idx = 0
for item in deviceList:
# filter device list - list only match VID:PID
if(
( item.vendorId == 0x054C and item.productId == 0x0306 ) or
item.devicePath == path
):
idx = hidList.InsertStringItem(sys.maxint, item.productString)
hidList.SetStringItem(idx, 1, item.vendorString)
hidList.SetStringItem(idx, 2, self.text.yes)
if item.devicePath == path:
hidList.Select(idx)
devices[idx] = item
#add not connected device to bottom of list
if not path and devicePath:
item = DeviceDescription(
devicePath,
vendorID,
vendorString,
productID,
productString,
versionNumber)
idx = hidList.InsertStringItem(sys.maxint, item.productString)
hidList.SetStringItem(idx, 1, item.vendorString)
hidList.SetStringItem(idx, 2, self.text.no)
hidList.Select(idx)
devices[idx] = item
#no device selected, disable ok and apply button
panel.EnableButtons(hidList.GetFirstSelected() != -1)
#layout
for i in range(hidList.GetColumnCount()):
hidList.SetColumnWidth(i, wx.LIST_AUTOSIZE_USEHEADER)
size = hidList.GetColumnWidth(i)
hidList.SetColumnWidth(i, wx.LIST_AUTOSIZE)
hidList.SetColumnWidth(i, max(size, hidList.GetColumnWidth(i) + 5))
panel.sizer.Add(hidList, 1, flag = wx.EXPAND)
#sizers
optionsSizer = wx.GridBagSizer(0, 5)
#eventname
optionsSizer.Add(
wx.StaticText(panel, -1, self.text.eventName),
(0, 0),
flag = wx.ALIGN_CENTER_VERTICAL)
eventNameCtrl = wx.TextCtrl(panel, value = eventName)
eventNameCtrl.SetMaxLength(32)
optionsSizer.Add(eventNameCtrl, (0, 1), (1, 2), flag = wx.EXPAND)
#checkbox for enduring event option
enduringEventsCtrl = wx.CheckBox(panel, -1, self.text.enduringEvents)
enduringEventsCtrl.SetValue(enduringEvents)
optionsSizer.Add(enduringEventsCtrl, (1, 0), (1, 3))
#text
optionsSizer.Add(
wx.StaticText(panel, -1, self.text.multipleDeviceOptions),
(3, 0), (1, 3),
flag = wx.ALIGN_CENTER_VERTICAL)
#checkbox for use first device
useDeviceIndexCtrl = wx.CheckBox(panel, -1, self.text.useDeviceIndex)
useDeviceIndexCtrl.SetValue(useDeviceIndex)
optionsSizer.Add(useDeviceIndexCtrl, (4, 0), (1, 2), flag = wx.ALIGN_LEFT | wx.ALIGN_CENTER_VERTICAL)
#device index spin control
deviceIndexCtrl = eg.SpinIntCtrl(panel, -1, deviceIndex, 0, 99, size=(100,-1))
optionsSizer.Add(deviceIndexCtrl, (4, 2), (1, 1))
#checkbox for no other port option
noOtherPortCtrl = wx.CheckBox(panel, -1, self.text.noOtherPort)
noOtherPortCtrl.SetValue(noOtherPort)
optionsSizer.Add(noOtherPortCtrl, (5, 0), (1, 3))
panel.sizer.Add(optionsSizer, 0, wx.TOP, 10)
def OnHidListSelect(event):
panel.EnableButtons(hidList.GetFirstSelected() != -1)
event.Skip()
def OnUseDeviceIndexCtrlChange(event):
noOtherPortCtrl.Enable(not useDeviceIndexCtrl.GetValue())
deviceIndexCtrl.Enable(useDeviceIndexCtrl.GetValue())
event.Skip()
def OnNoOtherPortChange(event):
useDeviceIndexCtrl.Enable(not noOtherPortCtrl.GetValue())
deviceIndexCtrl.Enable(not noOtherPortCtrl.GetValue())
event.Skip()
OnUseDeviceIndexCtrlChange(wx.CommandEvent())
OnNoOtherPortChange(wx.CommandEvent())
useDeviceIndexCtrl.Bind(wx.EVT_CHECKBOX, OnUseDeviceIndexCtrlChange)
noOtherPortCtrl.Bind(wx.EVT_CHECKBOX, OnNoOtherPortChange)
hidList.Bind(wx.EVT_LIST_ITEM_SELECTED, OnHidListSelect)
hidList.Bind(wx.EVT_LIST_ITEM_DESELECTED, OnHidListSelect)
######################################################################
panel.sizer.Add((15,15))
#sizers
ps3GroupSizer = wx.StaticBoxSizer(
wx.StaticBox(panel, -1, self.text.ps3Settings),
wx.VERTICAL
)
ps3Sizer = wx.GridBagSizer(0, 5)
#checkbox for ps3 release event
ps3ReleaseCtrl = wx.CheckBox(panel, -1, self.text.ps3Release)
ps3ReleaseCtrl.SetValue(ps3Release)
ps3Sizer.Add(ps3ReleaseCtrl, (0, 0), (1, 3))
#sleep time
ps3Sizer.Add(
wx.StaticText(panel, -1, self.text.sleepTime),
(2, 0), flag = wx.ALIGN_CENTER_VERTICAL)
sleepTimeCtrl = eg.SpinNumCtrl(
panel, -1, sleepTime, size=(200,-1), integerWidth=7, increment=1.00
)
ps3Sizer.Add(sleepTimeCtrl, (2, 1), flag = wx.EXPAND)
ps3Sizer.Add(
wx.StaticText(panel, -1, self.text.seconds),
(2, 2), (1, 2),
flag = wx.ALIGN_CENTER_VERTICAL)
#hibernate time
ps3Sizer.Add(
wx.StaticText(panel, -1, self.text.hibernateTime),
(3, 0), flag = wx.ALIGN_CENTER_VERTICAL)
hibernateTimeCtrl = eg.SpinNumCtrl(
panel, -1, hibernateTime, size=(200,-1), integerWidth=7, increment=1.00
)
ps3Sizer.Add(hibernateTimeCtrl, (3, 1), flag = wx.EXPAND)
ps3Sizer.Add(
wx.StaticText(panel, -1, self.text.seconds),
(3, 2), (1, 2),
flag = wx.ALIGN_CENTER_VERTICAL)
ps3GroupSizer.Add(ps3Sizer, 0, wx.ALL, 10)
panel.sizer.Add(ps3GroupSizer, 0, wx.EXPAND)
def OnEnduringEventsChange(event):
ps3ReleaseCtrl.Enable( not enduringEventsCtrl.GetValue() )
event.Skip()
OnEnduringEventsChange(wx.CommandEvent())
enduringEventsCtrl.Bind(wx.EVT_CHECKBOX, OnEnduringEventsChange)
######################################################################
while panel.Affirmed():
device = devices[hidList.GetFirstSelected()]
panel.SetResult(
eventNameCtrl.GetValue(),
enduringEventsCtrl.GetValue(),
False,
True,
ps3ReleaseCtrl.GetValue(),
False,
0.0,
0.0,
sleepTimeCtrl.GetValue(),
hibernateTimeCtrl.GetValue(),
noOtherPortCtrl.GetValue(),
device.devicePath,
device.vendorId,
device.vendorString,
device.productId,
device.productString,
device.versionNumber,
useDeviceIndexCtrl.GetValue(),
)
class GameVoice(eg.PluginClass):
def __init__(self):
self.thread = None
def ButtonCallback(self, data):
btnPressed = []
for num in data:
btnPressed.append(ButtonMapping[num])
buttonsCount = len(btnPressed)
if buttonsCount == 0:
self.TriggerEvent("None")
elif buttonsCount == 1:
self.TriggerEvent(btnPressed[0])
else:
self.TriggerEvent("+".join(btnPressed))
def StopCallback(self):
self.TriggerEvent("Stopped")
self.thread = None
def GetMyDevicePath(self):
path = GetDevicePath(None, VENDOR_ID, PRODUCT_ID, None, 0, True, 0)
return path
def SetupHidThread(self, newDevicePath):
#create thread
self.thread = HIDThread(self.name, newDevicePath, self.name)
self.thread.start()
self.thread.SetStopCallback(self.StopCallback)
self.thread.SetButtonCallback(self.ButtonCallback)
def SetFeature(self, buffer):
if self.thread:
self.thread.SetFeature(buffer)
def ReconnectDevice(self, event):
"""method to reconnect a disconnect device"""
if self.thread == None:
if not IsDeviceName(event.payload, VENDOR_ID, PRODUCT_ID):
return
#check if the right device was connected
#getting devicePath
newDevicePath = self.GetMyDevicePath()
if not newDevicePath:
#wrong device
return
self.SetupHidThread(newDevicePath)
def __start__(self):
#Bind plug in to RegisterDeviceNotification message
eg.Bind("System.DeviceAttached", self.ReconnectDevice)
newDevicePath = self.GetMyDevicePath()
if not newDevicePath:
#device not found
self.PrintError(Text.errorFind)
else:
self.SetupHidThread(newDevicePath)
def __stop__(self):
if self.thread:
self.thread.AbortThread()
#unbind from RegisterDeviceNotification message
eg.Unbind("System.DeviceAttached", self.ReconnectDevice)
def SetupHidThread(self, newDevicePath):
#create thread
self.thread = HIDThread(self.name, newDevicePath, self.name)
self.thread.start()
self.thread.SetStopCallback(self.StopCallback)
self.thread.SetButtonCallback(self.ButtonCallback)
class HID(eg.PluginClass):
def __init__(self):
self.thread = None
def RawCallback(self, data):
self.TriggerEvent(binascii.hexlify(data).upper())
def ButtonCallback(self, data):
if len(data):
#one or more buttons pressed
btnPressed = []
for num in data:
btnPressed.append(str(num))
evtName = "Button." + "+".join(btnPressed)
if self.enduringEvents:
self.TriggerEnduringEvent(evtName)
else:
self.TriggerEvent(evtName)
elif self.enduringEvents:
#no buttons pressed anymore
self.EndLastEvent()
else:
#trigger event so that releasing all buttons
#can get noticed even w/o enduring events
self.TriggerEvent("Button.None")
def ValueCallback(self, data):
for key, value in data.items():
if key in self.oldValues and value == self.oldValues[key]:
continue
self.oldValues[key] = value
self.TriggerEvent("Value." + str(key), payload=value)
def StopCallback(self):
self.TriggerEvent("Stopped")
self.thread = None
def GetMyDevicePath(self):
path = GetDevicePath(self.devicePath, self.vendorID, self.productID,
self.versionNumber, self.useDeviceIndex,
self.deviceIndex, self.noOtherPort)
return path
def SetupHidThread(self, newDevicePath):
#create thread
self.thread = HIDThread(self.vendorString + " " + self.productString,
newDevicePath)
self.thread.start()
self.thread.SetStopCallback(self.StopCallback)
if self.rawDataEvents:
self.thread.SetRawCallback(self.RawCallback)
else:
self.thread.SetButtonCallback(self.ButtonCallback)
self.thread.SetValueCallback(self.ValueCallback)
def ReconnectDevice(self, event):
"""method to reconnect a disconnect device"""
if self.thread == None:
if not IsDeviceName(event.payload, self.vendorID, self.productID):
return
#check if the right device was connected
#getting devicePath
newDevicePath = self.GetMyDevicePath()
if not newDevicePath:
#wrong device
return
self.SetupHidThread(newDevicePath)
def GetLabel(self,
eventName,
enduringEvents,
rawDataEvents,
noOtherPort,
devicePath,
vendorID,
vendorString,
productID,
productString,
versionNumber,
useDeviceIndex=False,
deviceIndex=0):
prefix = "HID: "
#one or both strings empty should not happen
if not vendorString or not productString:
return "HID"
#productString already contains manufacturer or vendor id only
if productString.find(vendorString) != -1 or\
vendorString[0:len(Text.vendorID)] == Text.vendorID:
return prefix + productString
return prefix + vendorString + " " + productString
def __start__(self,
eventName,
enduringEvents,
rawDataEvents,
noOtherPort,
devicePath,
vendorID,
vendorString,
productID,
productString,
versionNumber,
useDeviceIndex=False,
deviceIndex=0):
#saving parameters so they can be used to reconnect a device
self.eventName = eventName
self.enduringEvents = enduringEvents
self.rawDataEvents = rawDataEvents
self.noOtherPort = noOtherPort
self.devicePath = devicePath
self.vendorID = vendorID
self.vendorString = vendorString
self.productID = productID
self.productString = productString
self.versionNumber = versionNumber
self.useDeviceIndex = useDeviceIndex
self.deviceIndex = deviceIndex
self.oldValues = {}
if eventName:
self.info.eventPrefix = eventName
else:
self.info.eventPrefix = "HID"
#Bind plug in to RegisterDeviceNotification message
eg.Bind("System.DeviceAttached", self.ReconnectDevice)
newDevicePath = self.GetMyDevicePath()
if not newDevicePath:
#device not found
self.PrintError(Text.errorFind)
else:
self.SetupHidThread(newDevicePath)
def __stop__(self):
if self.thread:
self.thread.AbortThread()
#unbind from RegisterDeviceNotification message
eg.Unbind("System.DeviceAttached", self.ReconnectDevice)
def Configure(self,
eventName="",
enduringEvents=True,
rawDataEvents=False,
noOtherPort=False,
devicePath=None,
vendorID=None,
vendorString=None,
productID=None,
productString=None,
versionNumber=None,
useDeviceIndex=False,
deviceIndex=0):
deviceList = GetDeviceDescriptions()
panel = eg.ConfigPanel(self, resizable=True)
#building dialog
hidList = wx.ListCtrl(panel,
-1,
pos=wx.DefaultPosition,
size=wx.DefaultSize,
style=wx.LC_REPORT | wx.LC_SINGLE_SEL)
#create GUI
hidList.InsertColumn(0, Text.deviceName)
hidList.InsertColumn(1, Text.manufacturer)
hidList.InsertColumn(2, Text.connected)
path = GetDevicePath(devicePath, vendorID, productID, versionNumber,
noOtherPort, useDeviceIndex, deviceIndex,
deviceList)
#fill list
devices = {}
idx = 0
for item in deviceList:
idx = hidList.InsertStringItem(sys.maxint, item.productString)
hidList.SetStringItem(idx, 1, item.vendorString)
hidList.SetStringItem(idx, 2, Text.yes)
if item.devicePath == path:
hidList.Select(idx)
devices[idx] = item
#add not connected device to bottom of list
if not path and devicePath:
item = DeviceDescription(devicePath, vendorID, vendorString,
productID, productString, versionNumber)
idx = hidList.InsertStringItem(sys.maxint, item.productString)
hidList.SetStringItem(idx, 1, item.vendorString)
hidList.SetStringItem(idx, 2, Text.no)
hidList.Select(idx)
devices[idx] = item
#no device selected, disable ok and apply button
panel.EnableButtons(hidList.GetFirstSelected() != -1)
#layout
for i in range(hidList.GetColumnCount()):
hidList.SetColumnWidth(i, wx.LIST_AUTOSIZE_USEHEADER)
size = hidList.GetColumnWidth(i)
hidList.SetColumnWidth(i, wx.LIST_AUTOSIZE)
hidList.SetColumnWidth(i, max(size, hidList.GetColumnWidth(i) + 5))
panel.sizer.Add(hidList, 1, flag=wx.EXPAND)
#sizers
optionsSizer = wx.GridBagSizer(0, 5)
#eventname
optionsSizer.Add(wx.StaticText(panel, -1, Text.eventName), (0, 0),
flag=wx.ALIGN_CENTER_VERTICAL)
eventNameCtrl = wx.TextCtrl(panel, value=eventName)
eventNameCtrl.SetMaxLength(32)
optionsSizer.Add(eventNameCtrl, (0, 1), (1, 2), flag=wx.EXPAND)
#checkbox for enduring event option
enduringEventsCtrl = wx.CheckBox(panel, -1, Text.enduringEvents)
enduringEventsCtrl.SetValue(enduringEvents)
optionsSizer.Add(enduringEventsCtrl, (1, 0), (1, 3))
#checkbox for raw data events
rawDataEventsCtrl = wx.CheckBox(panel, -1, Text.rawDataEvents)
rawDataEventsCtrl.SetValue(rawDataEvents)
optionsSizer.Add(rawDataEventsCtrl, (2, 0), (1, 3))
#text
optionsSizer.Add(wx.StaticText(panel, -1, Text.multipleDeviceOptions),
(3, 0), (1, 3),
flag=wx.ALIGN_CENTER_VERTICAL)
#checkbox for use first device
useDeviceIndexCtrl = wx.CheckBox(panel, -1, Text.useDeviceIndex)
useDeviceIndexCtrl.SetValue(useDeviceIndex)
optionsSizer.Add(useDeviceIndexCtrl, (4, 0), (1, 2),
flag=wx.ALIGN_LEFT | wx.ALIGN_CENTER_VERTICAL)
#device index spin control
deviceIndexCtrl = eg.SpinIntCtrl(panel,
-1,
deviceIndex,
0,
99,
size=(100, -1))
optionsSizer.Add(deviceIndexCtrl, (4, 2), (1, 1))
#checkbox for no other port option
noOtherPortCtrl = wx.CheckBox(panel, -1, Text.noOtherPort)
noOtherPortCtrl.SetValue(noOtherPort)
optionsSizer.Add(noOtherPortCtrl, (5, 0), (1, 3))
panel.sizer.Add(optionsSizer, 0, wx.TOP, 10)
def OnHidListSelect(event):
panel.EnableButtons(hidList.GetFirstSelected() != -1)
event.Skip()
def OnRawDataEventsChange(event):
enduringEventsCtrl.Enable(not rawDataEventsCtrl.GetValue())
event.Skip()
def OnEnduringEventsChange(event):
rawDataEventsCtrl.Enable(not enduringEventsCtrl.GetValue())
event.Skip()
def OnUseDeviceIndexCtrlChange(event):
noOtherPortCtrl.Enable(not useDeviceIndexCtrl.GetValue())
deviceIndexCtrl.Enable(useDeviceIndexCtrl.GetValue())
event.Skip()
def OnNoOtherPortChange(event):
useDeviceIndexCtrl.Enable(not noOtherPortCtrl.GetValue())
deviceIndexCtrl.Enable(not noOtherPortCtrl.GetValue())
event.Skip()
OnRawDataEventsChange(wx.CommandEvent())
OnEnduringEventsChange(wx.CommandEvent())
OnUseDeviceIndexCtrlChange(wx.CommandEvent())
OnNoOtherPortChange(wx.CommandEvent())
rawDataEventsCtrl.Bind(wx.EVT_CHECKBOX, OnRawDataEventsChange)
enduringEventsCtrl.Bind(wx.EVT_CHECKBOX, OnEnduringEventsChange)
useDeviceIndexCtrl.Bind(wx.EVT_CHECKBOX, OnUseDeviceIndexCtrlChange)
noOtherPortCtrl.Bind(wx.EVT_CHECKBOX, OnNoOtherPortChange)
hidList.Bind(wx.EVT_LIST_ITEM_SELECTED, OnHidListSelect)
hidList.Bind(wx.EVT_LIST_ITEM_DESELECTED, OnHidListSelect)
while panel.Affirmed():
device = devices[hidList.GetFirstSelected()]
panel.SetResult(
eventNameCtrl.GetValue(),
enduringEventsCtrl.GetValue(),
rawDataEventsCtrl.GetValue(),
noOtherPortCtrl.GetValue(),
device.devicePath,
device.vendorId,
device.vendorString,
device.productId,
device.productString,
device.versionNumber,
useDeviceIndexCtrl.GetValue(),
deviceIndexCtrl.GetValue(),
)
class HIDPS3(eg.PluginClass):
def __init__(self):
self.text = Text
self.thread = None
self.PS3Remote = PS3Remote
self.batteryLevel = None
self.AddAction(GetBatteryLevel)
def RawCallback(self, data):
#hexdata= binascii.hexlify(data).upper()
#eg.PrintNotice( hexdata )
try:
if len(data) != 12:
raise PS3ParseError( 'length', 12, len(data) )
start= ord( data[0] )
mask= ord( data[1] )<<16 | ord( data[2] )<<8 | ord( data[3] )
code= ord( data[4] )
dummy= data[5:10]
state= ord( data[10] )
battery= ord( data[11] )
if start != 0x01:
raise PS3ParseError( 'data[0]', '0x01', hex(start) )
if dummy != "\xff\xff\xff\xff\xff":
raise PS3ParseError( 'data[5:10]', '0xffffffffff', hex(dummy) )
if battery > 0x05:
raise PS3ParseError( 'battery level', '0-5', battery )
if( battery < 0x02 ):
eg.PrintNotice(
'PS3 Remote: Battery Level: ' +
self.text.batteryLevel[battery]
)
#self.TriggerEvent(
# 'Code: ' + hex(code) +
# ' State: ' + hex(state) +
# ' Battery Level: ' + str(battery) + ':' +
# self.text.batteryLevel[battery] +
# ' Mask: ' + bin(mask),
# payload= ( battery, self.text.batteryLevel[battery] )
#)
if( code != 0xff and code not in self.PS3Remote.button ):
raise PS3ParseError( 'Key code', 'various', hex(code) )
btnPressed = []
if( code != 0xff ):
# single button pressed
btnPressed.append( self.PS3Remote.button[code] )
else:
# multiple buttons pressed
if( mask != 0x00 ):
for bit in range( 24 ):
if( mask & 1<<bit ):
if( bit not in self.PS3Remote.maskbit ):
PS3ParseError( 'Mask', 'various', bin(mask) )
btnPressed.append( self.PS3Remote.maskbit[bit] )
if btnPressed == []:
PS3ParseError( 'Mask', 'various','Empty Mask' )
if btnPressed != []:
evtName = 'Button.' + '+'.join(btnPressed)
if self.enduringEvents:
self.TriggerEnduringEvent(evtName)
else:
self.TriggerEvent(evtName)
elif self.enduringEvents:
#no buttons pressed anymore
self.EndLastEvent()
elif self.ps3Release:
#trigger event so that releasing all buttons
#can get noticed even w/o enduring events
self.TriggerEvent( 'Button.None' )
self.batteryLevel= battery
except PS3ParseError as catchedError:
eg.PrintError(
'PS3-HID Plugin: ' + catchedError +
' Data: 0x' + binascii.hexlify(data).lower()
)
def StopCallback(self):
self.TriggerEvent("Stopped")
self.thread = None
def GetMyDevicePath(self):
path = GetDevicePath(
self.devicePath,
self.vendorID,
self.productID,
self.versionNumber,
self.useDeviceIndex,
self.deviceIndex,
self.noOtherPort)
return path;
def SetupHidThread(self, newDevicePath):
#create thread
self.thread = HIDThread(
self.vendorString + " " + self.productString, newDevicePath
)
self.thread.start()
self.thread.SetStopCallback(self.StopCallback)
self.thread.SetRawCallback(self.RawCallback)
def ReconnectDevice(self, event):
"""method to reconnect a disconnect device"""
if self.thread == None:
#updating device list
#check if the right device was connected
#getting devicePath
newDevicePath = self.GetMyDevicePath()
if not newDevicePath:
#wrong device
return
self.SetupHidThread(newDevicePath)
def GetLabel(self,
eventName,
enduringEvents,
rawDataEvents,
ps3DataEvents,
ps3Release,
ps3Zone,
shortKeyTime,
longKeyTime,
sleepTime,
hibernateTime,
noOtherPort,
devicePath,
vendorID,
vendorString,
productID,
productString,
versionNumber,
# For backwards-compatibility with 2.0.2 and 3.0.0 - if a new config option is added this can just be replaced
dummy = None,
useDeviceIndex = False,
deviceIndex = 0
):
prefix = "PS3: "
#one or both strings empty should not happen
if not vendorString or not productString:
return "PS3"
#productString already contains manufacturer or vendor id only
if productString.find(vendorString) != -1 or\
vendorString[0:len(self.text.vendorID)] == self.text.vendorID:
return prefix + productString
return prefix + vendorString + " " + productString
def __start__(self,
eventName,
enduringEvents,
rawDataEvents,
ps3DataEvents,
ps3Release,
ps3Zone,
shortKeyTime,
longKeyTime,
sleepTime,
hibernateTime,
noOtherPort,
devicePath,
vendorID,
vendorString,
productID,
productString,
versionNumber,
# For backwards-compatibility with 2.0.2 and 3.0.0 - if a new config option is added this can just be replaced
dummy = None,
useDeviceIndex = False,
deviceIndex = 0
):
#saving parameters so they can be used to reconnect a device
self.eventName = eventName
self.enduringEvents = enduringEvents
self.noOtherPort = noOtherPort
self.devicePath = devicePath
self.vendorID = vendorID
self.vendorString = vendorString
self.productID = productID
self.productString = productString
self.versionNumber = versionNumber
self.useDeviceIndex = useDeviceIndex
self.deviceIndex = deviceIndex
self.ps3Release = ps3Release
self.oldValues = {}
if eventName:
self.info.eventPrefix = eventName
else:
self.info.eventPrefix = "PS3"
#Bind plug in to RegisterDeviceNotification message
eg.Bind("System.DeviceAttached", self.ReconnectDevice)
newDevicePath = self.GetMyDevicePath()
if not newDevicePath:
#device not found
self.PrintError(Text.errorFind)
else:
self.SetupHidThread(newDevicePath)
def __stop__(self):
if self.thread:
self.thread.AbortThread()
#unbind from RegisterDeviceNotification message
eg.Unbind("System.DeviceAttached", self.ReconnectDevice)
def Configure(self,
eventName = "",
enduringEvents = True,
rawDataEvents = False, # no longer used
ps3DataEvents = False, # no longer used
ps3Release = False,
ps3Zone = False, # no longer used
shortKeyTime = 0.0, # no longer used
longKeyTime = 0.0, # no longer used
sleepTime = 5.0,
hibernateTime = 60.0,
noOtherPort = False,
devicePath = None,
vendorID = None,
vendorString = None,
productID = None,
productString = None,
versionNumber = None,
# For backwards-compatibility with 2.0.2 and 3.0.0 - if a new config option is added this can just be replaced
dummy = None,
useDeviceIndex = False,
deviceIndex = 0
):
deviceList = GetDeviceDescriptions()
panel = eg.ConfigPanel(self, resizable=True)
#building dialog
hidList = wx.ListCtrl(panel, -1, pos=wx.DefaultPosition,
size=wx.DefaultSize, style=wx.LC_REPORT | wx.LC_SINGLE_SEL)
#create GUI
hidList.InsertColumn(0, self.text.deviceName)
hidList.InsertColumn(1, self.text.manufacturer)
hidList.InsertColumn(2, self.text.connected)
path = GetDevicePath(
devicePath,
vendorID,
productID,
versionNumber,
noOtherPort,
useDeviceIndex,
deviceIndex,
deviceList)
#fill list
devices = {}
idx = 0
for item in deviceList:
# eg.Print("VID=%X, PID=%X, name=%s" %(item.vendorId, item.productId, item.productString))
# filter device list - list only match VID:PID
if(
( ( item.vendorId == 0x054C or item.vendorId == 0x609 ) and item.productId == 0x0306 ) or
item.devicePath == path or
item.productString == 'BD Remote Control'
):
idx = hidList.InsertStringItem(sys.maxint, item.productString)
hidList.SetStringItem(idx, 1, item.vendorString)
hidList.SetStringItem(idx, 2, self.text.yes)
if item.devicePath == path:
hidList.Select(idx)
devices[idx] = item
#add not connected device to bottom of list
if not path and devicePath:
item = DeviceDescription(
devicePath,
vendorID,
vendorString,
productID,
productString,
versionNumber)
idx = hidList.InsertStringItem(sys.maxint, item.productString)
hidList.SetStringItem(idx, 1, item.vendorString)
hidList.SetStringItem(idx, 2, self.text.no)
hidList.Select(idx)
devices[idx] = item
#no device selected, disable ok and apply button
panel.EnableButtons(hidList.GetFirstSelected() != -1)
#layout
for i in range(hidList.GetColumnCount()):
hidList.SetColumnWidth(i, wx.LIST_AUTOSIZE_USEHEADER)
size = hidList.GetColumnWidth(i)
hidList.SetColumnWidth(i, wx.LIST_AUTOSIZE)
hidList.SetColumnWidth(i, max(size, hidList.GetColumnWidth(i) + 5))
panel.sizer.Add(hidList, 1, flag = wx.EXPAND)
#sizers
optionsSizer = wx.GridBagSizer(0, 5)
#eventname
optionsSizer.Add(
wx.StaticText(panel, -1, self.text.eventName),
(0, 0),
flag = wx.ALIGN_CENTER_VERTICAL)
eventNameCtrl = wx.TextCtrl(panel, value = eventName)
eventNameCtrl.SetMaxLength(32)
optionsSizer.Add(eventNameCtrl, (0, 1), (1, 2), flag = wx.EXPAND)
#checkbox for enduring event option
enduringEventsCtrl = wx.CheckBox(panel, -1, self.text.enduringEvents)
enduringEventsCtrl.SetValue(enduringEvents)
optionsSizer.Add(enduringEventsCtrl, (1, 0), (1, 3))
#text
optionsSizer.Add(
wx.StaticText(panel, -1, self.text.multipleDeviceOptions),
(3, 0), (1, 3),
flag = wx.ALIGN_CENTER_VERTICAL)
#checkbox for use first device
useDeviceIndexCtrl = wx.CheckBox(panel, -1, self.text.useDeviceIndex)
useDeviceIndexCtrl.SetValue(useDeviceIndex)
optionsSizer.Add(useDeviceIndexCtrl, (4, 0), (1, 2), flag = wx.ALIGN_LEFT | wx.ALIGN_CENTER_VERTICAL)
#device index spin control
deviceIndexCtrl = eg.SpinIntCtrl(panel, -1, deviceIndex, 0, 99, size=(100,-1))
optionsSizer.Add(deviceIndexCtrl, (4, 2), (1, 1))
#checkbox for no other port option
noOtherPortCtrl = wx.CheckBox(panel, -1, self.text.noOtherPort)
noOtherPortCtrl.SetValue(noOtherPort)
optionsSizer.Add(noOtherPortCtrl, (5, 0), (1, 3))
panel.sizer.Add(optionsSizer, 0, wx.TOP, 10)
def OnHidListSelect(event):
panel.EnableButtons(hidList.GetFirstSelected() != -1)
event.Skip()
def OnUseDeviceIndexCtrlChange(event):
noOtherPortCtrl.Enable(not useDeviceIndexCtrl.GetValue())
deviceIndexCtrl.Enable(useDeviceIndexCtrl.GetValue())
event.Skip()
def OnNoOtherPortChange(event):
useDeviceIndexCtrl.Enable(not noOtherPortCtrl.GetValue())
deviceIndexCtrl.Enable(not noOtherPortCtrl.GetValue())
event.Skip()
OnUseDeviceIndexCtrlChange(wx.CommandEvent())
OnNoOtherPortChange(wx.CommandEvent())
useDeviceIndexCtrl.Bind(wx.EVT_CHECKBOX, OnUseDeviceIndexCtrlChange)
noOtherPortCtrl.Bind(wx.EVT_CHECKBOX, OnNoOtherPortChange)
hidList.Bind(wx.EVT_LIST_ITEM_SELECTED, OnHidListSelect)
hidList.Bind(wx.EVT_LIST_ITEM_DESELECTED, OnHidListSelect)
######################################################################
panel.sizer.Add((15,15))
#sizers
ps3GroupSizer = wx.StaticBoxSizer(
wx.StaticBox(panel, -1, self.text.ps3Settings),
wx.VERTICAL
)
ps3Sizer = wx.GridBagSizer(0, 5)
#checkbox for ps3 release event
ps3ReleaseCtrl = wx.CheckBox(panel, -1, self.text.ps3Release)
ps3ReleaseCtrl.SetValue(ps3Release)
ps3Sizer.Add(ps3ReleaseCtrl, (0, 0), (1, 3))
#sleep time
ps3Sizer.Add(
wx.StaticText(panel, -1, self.text.sleepTime),
(2, 0), flag = wx.ALIGN_CENTER_VERTICAL)
sleepTimeCtrl = eg.SpinNumCtrl(
panel, -1, sleepTime, size=(200,-1), integerWidth=7, increment=1.00
)
ps3Sizer.Add(sleepTimeCtrl, (2, 1), flag = wx.EXPAND)
ps3Sizer.Add(
wx.StaticText(panel, -1, self.text.seconds),
(2, 2), (1, 2),
flag = wx.ALIGN_CENTER_VERTICAL)
#hibernate time
ps3Sizer.Add(
wx.StaticText(panel, -1, self.text.hibernateTime),
(3, 0), flag = wx.ALIGN_CENTER_VERTICAL)
hibernateTimeCtrl = eg.SpinNumCtrl(
panel, -1, hibernateTime, size=(200,-1), integerWidth=7, increment=1.00
)
ps3Sizer.Add(hibernateTimeCtrl, (3, 1), flag = wx.EXPAND)
ps3Sizer.Add(
wx.StaticText(panel, -1, self.text.seconds),
(3, 2), (1, 2),
flag = wx.ALIGN_CENTER_VERTICAL)
ps3GroupSizer.Add(ps3Sizer, 0, wx.ALL, 10)
panel.sizer.Add(ps3GroupSizer, 0, wx.EXPAND)
def OnEnduringEventsChange(event):
ps3ReleaseCtrl.Enable( not enduringEventsCtrl.GetValue() )
event.Skip()
OnEnduringEventsChange(wx.CommandEvent())
enduringEventsCtrl.Bind(wx.EVT_CHECKBOX, OnEnduringEventsChange)
######################################################################
while panel.Affirmed():
device = devices[hidList.GetFirstSelected()]
panel.SetResult(
eventNameCtrl.GetValue(),
enduringEventsCtrl.GetValue(),
False,
True,
ps3ReleaseCtrl.GetValue(),
False,
0.0,
0.0,
sleepTimeCtrl.GetValue(),
hibernateTimeCtrl.GetValue(),
noOtherPortCtrl.GetValue(),
device.devicePath,
device.vendorId,
device.vendorString,
device.productId,
device.productString,
device.versionNumber,
useDeviceIndexCtrl.GetValue(),
)
class GameVoice(eg.PluginClass):
def __init__(self):
self.thread = None
def ButtonCallback(self, data):
btnPressed = []
for num in data:
btnPressed.append(ButtonMapping[num])
buttonsCount = len(btnPressed)
if buttonsCount == 0:
self.TriggerEvent("None")
elif buttonsCount == 1:
self.TriggerEvent(btnPressed[0])
else:
self.TriggerEvent("+".join(btnPressed))
def StopCallback(self):
self.TriggerEvent("Stopped")
self.thread = None
def GetMyDevicePath(self):
path = GetDevicePath(
None,
VENDOR_ID,
PRODUCT_ID,
None,
0,
True,
0)
return path;
def SetupHidThread(self, newDevicePath):
#create thread
self.thread = HIDThread(self.name, newDevicePath, self.name)
self.thread.start()
self.thread.SetStopCallback(self.StopCallback)
self.thread.SetButtonCallback(self.ButtonCallback)
def SetFeature(self, buffer):
if self.thread:
self.thread.SetFeature(buffer)
def ReconnectDevice(self, event):
"""method to reconnect a disconnect device"""
if self.thread == None:
if not IsDeviceName(event.payload, VENDOR_ID, PRODUCT_ID):
return
#check if the right device was connected
#getting devicePath
newDevicePath = self.GetMyDevicePath()
if not newDevicePath:
#wrong device
return
self.SetupHidThread(newDevicePath)
def __start__(self):
#Bind plug in to RegisterDeviceNotification message
eg.Bind("System.DeviceAttached", self.ReconnectDevice)
newDevicePath = self.GetMyDevicePath()
if not newDevicePath:
#device not found
self.PrintError(Text.errorFind)
else:
self.SetupHidThread(newDevicePath)
def __stop__(self):
if self.thread:
self.thread.AbortThread()
#unbind from RegisterDeviceNotification message
eg.Unbind("System.DeviceAttached", self.ReconnectDevice)
class FS20PCE(eg.PluginClass):
def __init__(self):
self.version = None
self.thread = None
self.PendingEvents = {}
self.mappings = None
def RawCallback(self, data):
if not data or len(data) != 13 or ord(data[0]) != 2 or ord(
data[1]) != 11:
self.PrintError("invalid data")
return
self.version = ord(data[12])
houseCode = binascii.hexlify(data[2:6])
deviceCode = binascii.hexlify(data[6:8])
command = ord(data[8])
names = self.GetGroupNames(houseCode, deviceCode)
#cancel pending events
for deviceName in names:
if deviceName in self.PendingEvents:
#cancel pending events for this device
try:
timerEntry = self.PendingEvents[deviceName]
startTime, func, args, kwargs = timerEntry
eg.scheduler.CancelTask(timerEntry)
self.TriggerEvent(deviceName + ".Cancel", payload=args[1])
del self.PendingEvents[deviceName]
except KeyError:
#may happen due to multithreaded access to self.PendingEvents dict
pass
except ValueError:
#may happen due to multithreaded access to eg.scheduler's internal list
pass
validTime = ord(data[9]) > 15
if validTime:
timeStr = binascii.hexlify(data[9:12])
timeStr = timeStr[1:] #cut the one
eventTime = float(timeStr) * 0.25
else:
eventTime = 0
if command in DirectCommands:
commandStr0 = DirectCommands[command]
commandStr1 = None
payload0 = (eventTime)
elif command in DelayedCommands:
if (validTime and eventTime):
commandStr0 = None
commandStr1 = DelayedCommands[command]
payload0 = (eventTime, commandStr1)
else:
commandStr0 = DelayedCommands[command]
commandStr1 = None
payload0 = None
elif command in DoubleCommands:
commandStr0, commandStr1 = DoubleCommands[command]
payload0 = (eventTime, commandStr1)
else:
commandStr0 = binascii.hexlify(data[8]).upper()
commandStr1 = None
payload0 = None
if (commandStr0):
self.TriggerEvent(deviceName + "." + commandStr0,
payload=payload0)
else:
self.TriggerEvent(deviceName + ".Timer", payload=payload0)
if (commandStr1):
if (eventTime > 0):
timerEntry = eg.scheduler.AddShortTask(
eventTime, self.SchedulerCallback, deviceName,
commandStr1)
self.PendingEvents[deviceName] = timerEntry
else:
self.TriggerEvent(deviceName + "." + commandStr1)
def SchedulerCallback(self, deviceName, commandStr):
if deviceName in self.PendingEvents:
#cancel pending events for this device
try:
timerEntry = self.PendingEvents[deviceName]
startTime, func, args, kwargs = timerEntry
if (args[1] == commandStr):
#maybe an old entry if commandStr does not match
self.TriggerEvent(deviceName + "." + commandStr)
del self.PendingEvents[deviceName]
except KeyError:
#may happen due to multithreaded access to self.PendingEvents dict
pass
def GetGroupNames(self, houseCode, deviceCode):
names = [houseCode + "." + deviceCode]
if self.mappings:
for houseCodePattern, deviceCodePattern, deviceName in self.mappings:
if (deviceName in names):
continue
if CheckPattern(deviceCodePattern,
deviceCode) and CheckPattern(
houseCodePattern, houseCode):
names.append(deviceName)
return names
def PrintVersion(self):
#create the following python command to show version number
#eg.plugins.FS20PCE.plugin.PrintVersion()
if self.version == None:
print "Need to receive data first. Please press a button and try again."
else:
versionMajor = self.version / 16
versionMinor = self.version % 16
print "Firmware version %d.%d" % (versionMajor, versionMinor)
def StopCallback(self):
self.TriggerEvent("Stopped")
self.thread = None
def GetMyDevicePath(self):
path = GetDevicePath(None, VENDOR_ID, PRODUCT_ID, None, 0, True, 0)
return path
def SetupHidThread(self, newDevicePath):
#create thread
self.thread = HIDThread(self.name, newDevicePath, self.name)
self.thread.start()
self.thread.SetStopCallback(self.StopCallback)
self.thread.SetRawCallback(self.RawCallback)
def ReconnectDevice(self, event):
"""method to reconnect a disconnect device"""
if self.thread == None:
if not IsDeviceName(event.payload, VENDOR_ID, PRODUCT_ID):
return
#check if the right device was connected
#getting devicePath
newDevicePath = self.GetMyDevicePath()
if not newDevicePath:
#wrong device
return
self.SetupHidThread(newDevicePath)
def __start__(self, mappings=None):
self.mappings = mappings
#Bind plug in to RegisterDeviceNotification message
eg.Bind("System.DeviceAttached", self.ReconnectDevice)
newDevicePath = self.GetMyDevicePath()
if not newDevicePath:
#device not found
self.PrintError(Text.errorFind)
else:
self.SetupHidThread(newDevicePath)
def __stop__(self):
if self.thread:
self.thread.AbortThread()
#unbind from RegisterDeviceNotification message
eg.Unbind("System.DeviceAttached", self.ReconnectDevice)
def Configure(
self,
mappings=None,
):
#gui callbacks and helper methods
def ValidChars(input):
for char in input:
if char != '1' and char != '2' and char != '3' and char != '4' and char != '?':
return False
return True
def ContainsItem(houseCode, deviceAddress, groupName):
for i in range(0, mappingsList.GetItemCount()):
if houseCode != mappingsList.GetItem(i, 0).GetText():
continue
if deviceAddress != mappingsList.GetItem(i, 1).GetText():
continue
if groupName != mappingsList.GetItem(i, 2).GetText():
continue
return True
return False
def OnItemSelected(event):
idx = mappingsList.GetFirstSelected()
houseCodeTextCtrl.SetValue(mappingsList.GetItem(idx, 0).GetText())
deviceAddressTextCtrl.SetValue(
mappingsList.GetItem(idx, 1).GetText())
groupNameCtrl.SetValue(mappingsList.GetItem(idx, 2).GetText())
def EnableButtons(event):
idx = mappingsList.GetFirstSelected()
houseCode = houseCodeTextCtrl.GetValue()
deviceAddress = deviceAddressTextCtrl.GetValue()
groupName = groupNameCtrl.GetValue()
valid = houseCodeTextCtrl.IsValid(
) and deviceAddressTextCtrl.IsValid() and len(groupName)
itemSelected = idx != -1
addButton.Enable(
valid
and not ContainsItem(houseCode, deviceAddress, groupName))
updateButton.Enable(valid and itemSelected and \
(houseCode != mappingsList.GetItem(idx, 0).GetText() \
or deviceAddress != mappingsList.GetItem(idx, 1).GetText() \
or groupName != mappingsList.GetItem(idx, 2).GetText()) \
and not ContainsItem(houseCode, deviceAddress, groupName))
deleteButton.Enable(itemSelected)
event.Skip()
def OnAddButton(event):
idx = mappingsList.InsertStringItem(sys.maxint,
houseCodeTextCtrl.GetValue())
mappingsList.SetStringItem(idx, 1,
deviceAddressTextCtrl.GetValue())
mappingsList.SetStringItem(idx, 2, groupNameCtrl.GetValue())
mappingsList.Select(idx)
EnableButtons(event)
event.Skip()
def OnUpdateButton(event):
idx = mappingsList.GetFirstSelected()
mappingsList.SetStringItem(idx, 0, houseCodeTextCtrl.GetValue())
mappingsList.SetStringItem(idx, 1,
deviceAddressTextCtrl.GetValue())
mappingsList.SetStringItem(idx, 2, groupNameCtrl.GetValue())
EnableButtons(event)
event.Skip()
def OnDeleteButton(event):
idx = mappingsList.GetFirstSelected()
mappingsList.DeleteItem(idx)
EnableButtons(event)
event.Skip()
panel = eg.ConfigPanel(self, resizable=True)
#building dialog
mappingsList = wx.ListCtrl(panel,
-1,
pos=wx.DefaultPosition,
size=wx.DefaultSize,
style=wx.LC_REPORT | wx.LC_SINGLE_SEL)
#create list
mappingsList.InsertColumn(0, Text.houseCode)
mappingsList.InsertColumn(1, Text.deviceAddress)
mappingsList.InsertColumn(2, Text.groupName)
#add items
if mappings:
for item in mappings:
idx = mappingsList.InsertStringItem(sys.maxint, item[0])
mappingsList.SetStringItem(idx, 1, item[1])
mappingsList.SetStringItem(idx, 2, item[2])
#layout
for i in range(mappingsList.GetColumnCount()):
mappingsList.SetColumnWidth(i, wx.LIST_AUTOSIZE_USEHEADER)
size = mappingsList.GetColumnWidth(i)
mappingsList.SetColumnWidth(i, wx.LIST_AUTOSIZE)
mappingsList.SetColumnWidth(
i, max(size,
mappingsList.GetColumnWidth(i) + 5))
houseCodeTextCtrl = TextCtrl(
panel,
mask="XXXXXXXX",
choiceRequired=True,
validFunc=ValidChars,
defaultValue="????????",
formatcodes="F",
)
deviceAddressTextCtrl = TextCtrl(
panel,
mask="XXXX",
choiceRequired=True,
validFunc=ValidChars,
defaultValue="????",
formatcodes="F",
)
groupNameCtrl = wx.TextCtrl(panel)
editSizer = wx.GridSizer(3, 2)
editSizer.Add(wx.StaticText(panel, -1, Text.houseCode + ":"),
wx.ALIGN_CENTER_VERTICAL)
editSizer.Add(houseCodeTextCtrl, 0)
editSizer.Add(wx.StaticText(panel, -1, Text.deviceAddress + ":"),
wx.ALIGN_CENTER_VERTICAL)
editSizer.Add(deviceAddressTextCtrl, 0)
editSizer.Add(wx.StaticText(panel, -1, Text.groupName + ":"),
wx.ALIGN_CENTER_VERTICAL)
editSizer.Add(groupNameCtrl, 0)
addButton = wx.Button(panel, -1, Text.add)
updateButton = wx.Button(panel, -1, Text.update)
deleteButton = wx.Button(panel, -1, Text.delete)
buttonsSizer = wx.GridSizer(1, 3)
buttonsSizer.Add(addButton)
buttonsSizer.Add(deleteButton)
buttonsSizer.Add(updateButton)
houseCodeTextCtrl.Bind(wx.EVT_TEXT, EnableButtons)
deviceAddressTextCtrl.Bind(wx.EVT_TEXT, EnableButtons)
groupNameCtrl.Bind(wx.EVT_TEXT, EnableButtons)
addButton.Bind(wx.EVT_BUTTON, OnAddButton)
updateButton.Bind(wx.EVT_BUTTON, OnUpdateButton)
deleteButton.Bind(wx.EVT_BUTTON, OnDeleteButton)
mappingsList.Bind(wx.EVT_LIST_ITEM_SELECTED, OnItemSelected)
mappingsList.Bind(wx.EVT_LIST_ITEM_SELECTED, EnableButtons)
mappingsList.Bind(wx.EVT_LIST_ITEM_DESELECTED, EnableButtons)
EnableButtons(wx.CommandEvent())
panel.sizer.Add(wx.StaticText(panel, -1, Text.help0))
panel.sizer.Add(wx.StaticText(panel, -1, Text.help1))
panel.sizer.Add(mappingsList, 1, flag=wx.EXPAND)
panel.sizer.Add(editSizer)
panel.sizer.Add(buttonsSizer)
while panel.Affirmed():
newMappings = []
for i in range(0, mappingsList.GetItemCount()):
item = mappingsList.GetItem(i, 0).GetText(), \
mappingsList.GetItem(i, 1).GetText(), \
mappingsList.GetItem(i, 2).GetText()
newMappings.append(item)
panel.SetResult(newMappings)
class FS20PCE(eg.PluginClass):
def __init__(self):
self.version = None
self.thread = None
self.PendingEvents = {}
self.mappings = None
def RawCallback(self, data):
if not data or len(data) != 13 or ord(data[0]) != 2 or ord(data[1]) != 11:
self.PrintError("invalid data")
return
self.version = ord(data[12])
houseCode = binascii.hexlify(data[2:6])
deviceCode = binascii.hexlify(data[6:8])
command = ord(data[8])
names = self.GetGroupNames(houseCode, deviceCode)
#cancel pending events
for deviceName in names:
if deviceName in self.PendingEvents:
#cancel pending events for this device
try:
timerEntry = self.PendingEvents[deviceName]
startTime, func, args, kwargs = timerEntry
eg.scheduler.CancelTask(timerEntry)
self.TriggerEvent(deviceName + ".Cancel", payload = args[1])
del self.PendingEvents[deviceName]
except KeyError:
#may happen due to multithreaded access to self.PendingEvents dict
pass
except ValueError:
#may happen due to multithreaded access to eg.scheduler's internal list
pass
validTime = ord(data[9]) > 15
if validTime:
timeStr = binascii.hexlify(data[9:12])
timeStr = timeStr[1:]#cut the one
eventTime = float(timeStr) * 0.25
else:
eventTime = 0
if command in DirectCommands:
commandStr0 = DirectCommands[command]
commandStr1 = None
payload0 = (eventTime)
elif command in DelayedCommands:
if (validTime and eventTime):
commandStr0 = None
commandStr1 = DelayedCommands[command]
payload0 = (eventTime, commandStr1)
else:
commandStr0 = DelayedCommands[command]
commandStr1 = None
payload0 = None
elif command in DoubleCommands:
commandStr0, commandStr1 = DoubleCommands[command]
payload0 = (eventTime, commandStr1)
else:
commandStr0 = binascii.hexlify(data[8]).upper()
commandStr1 = None
payload0 = None
if (commandStr0):
self.TriggerEvent(deviceName + "." + commandStr0, payload = payload0)
else:
self.TriggerEvent(deviceName + ".Timer", payload = payload0)
if (commandStr1):
if (eventTime > 0):
timerEntry = eg.scheduler.AddTask(eventTime, self.SchedulerCallback, deviceName, commandStr1)
self.PendingEvents[deviceName] = timerEntry
else:
self.TriggerEvent(deviceName + "." + commandStr1)
def SchedulerCallback(self, deviceName, commandStr):
if deviceName in self.PendingEvents:
#cancel pending events for this device
try:
timerEntry = self.PendingEvents[deviceName]
startTime, func, args, kwargs = timerEntry
if (args[1] == commandStr):
#maybe an old entry if commandStr does not match
self.TriggerEvent(deviceName + "." + commandStr)
del self.PendingEvents[deviceName]
except KeyError:
#may happen due to multithreaded access to self.PendingEvents dict
pass
def GetGroupNames(self, houseCode, deviceCode):
names = [houseCode + "." + deviceCode]
if self.mappings:
for houseCodePattern, deviceCodePattern, deviceName in self.mappings:
if (deviceName in names):
continue
if CheckPattern(deviceCodePattern, deviceCode) and CheckPattern(houseCodePattern, houseCode):
names.append(deviceName)
return names
def PrintVersion(self):
#create the following python command to show version number
#eg.plugins.FS20PCE.plugin.PrintVersion()
if self.version == None:
print "Need to receive data first. Please press a button and try again."
else:
versionMajor = self.version / 16
versionMinor = self.version % 16
print "Firmware version %d.%d" % (versionMajor, versionMinor)
def StopCallback(self):
self.TriggerEvent("Stopped")
self.thread = None
def GetMyDevicePath(self):
path = GetDevicePath(
None,
VENDOR_ID,
PRODUCT_ID,
None,
0,
True,
0)
return path;
def SetupHidThread(self, newDevicePath):
#create thread
self.thread = HIDThread(self.name, newDevicePath, self.name)
self.thread.start()
self.thread.SetStopCallback(self.StopCallback)
self.thread.SetRawCallback(self.RawCallback)
def ReconnectDevice(self, event):
"""method to reconnect a disconnect device"""
if self.thread == None:
if not IsDeviceName(event.payload, VENDOR_ID, PRODUCT_ID):
return
#check if the right device was connected
#getting devicePath
newDevicePath = self.GetMyDevicePath()
if not newDevicePath:
#wrong device
return
self.SetupHidThread(newDevicePath)
def __start__(self, mappings = None):
self.mappings = mappings
#Bind plug in to RegisterDeviceNotification message
eg.Bind("System.DeviceAttached", self.ReconnectDevice)
newDevicePath = self.GetMyDevicePath()
if not newDevicePath:
#device not found
self.PrintError(Text.errorFind)
else:
self.SetupHidThread(newDevicePath)
def __stop__(self):
if self.thread:
self.thread.AbortThread()
#unbind from RegisterDeviceNotification message
eg.Unbind("System.DeviceAttached", self.ReconnectDevice)
def Configure(self,
mappings = None,
):
#gui callbacks and helper methods
def ValidChars(input):
for char in input:
if char != '1' and char != '2' and char != '3' and char != '4' and char != '?':
return False
return True
def ContainsItem(houseCode, deviceAddress, groupName):
for i in range(0, mappingsList.GetItemCount()):
if houseCode != mappingsList.GetItem(i, 0).GetText():
continue
if deviceAddress != mappingsList.GetItem(i, 1).GetText():
continue
if groupName != mappingsList.GetItem(i, 2).GetText():
continue
return True
return False
def OnItemSelected(event):
idx = mappingsList.GetFirstSelected()
houseCodeTextCtrl.SetValue(mappingsList.GetItem(idx, 0).GetText())
deviceAddressTextCtrl.SetValue(mappingsList.GetItem(idx, 1).GetText())
groupNameCtrl.SetValue(mappingsList.GetItem(idx, 2).GetText())
def EnableButtons(event):
idx = mappingsList.GetFirstSelected()
houseCode = houseCodeTextCtrl.GetValue()
deviceAddress = deviceAddressTextCtrl.GetValue()
groupName = groupNameCtrl.GetValue()
valid = houseCodeTextCtrl.IsValid() and deviceAddressTextCtrl.IsValid() and len(groupName)
itemSelected = idx != -1
addButton.Enable(valid and not ContainsItem(houseCode, deviceAddress, groupName))
updateButton.Enable(valid and itemSelected and \
(houseCode != mappingsList.GetItem(idx, 0).GetText() \
or deviceAddress != mappingsList.GetItem(idx, 1).GetText() \
or groupName != mappingsList.GetItem(idx, 2).GetText()) \
and not ContainsItem(houseCode, deviceAddress, groupName))
deleteButton.Enable(itemSelected)
event.Skip()
def OnAddButton(event):
idx = mappingsList.InsertStringItem(sys.maxint, houseCodeTextCtrl.GetValue())
mappingsList.SetStringItem(idx, 1, deviceAddressTextCtrl.GetValue())
mappingsList.SetStringItem(idx, 2, groupNameCtrl.GetValue())
mappingsList.Select(idx)
EnableButtons(event)
event.Skip()
def OnUpdateButton(event):
idx = mappingsList.GetFirstSelected()
mappingsList.SetStringItem(idx, 0, houseCodeTextCtrl.GetValue())
mappingsList.SetStringItem(idx, 1, deviceAddressTextCtrl.GetValue())
mappingsList.SetStringItem(idx, 2, groupNameCtrl.GetValue())
EnableButtons(event)
event.Skip()
def OnDeleteButton(event):
idx = mappingsList.GetFirstSelected()
mappingsList.DeleteItem(idx)
EnableButtons(event)
event.Skip()
panel = eg.ConfigPanel(self, resizable=True)
#building dialog
mappingsList = wx.ListCtrl(panel, -1, pos=wx.DefaultPosition,
size=wx.DefaultSize, style=wx.LC_REPORT | wx.LC_SINGLE_SEL)
#create list
mappingsList.InsertColumn(0, Text.houseCode)
mappingsList.InsertColumn(1, Text.deviceAddress)
mappingsList.InsertColumn(2, Text.groupName)
#add items
if mappings:
for item in mappings:
idx = mappingsList.InsertStringItem(sys.maxint, item[0])
mappingsList.SetStringItem(idx, 1, item[1])
mappingsList.SetStringItem(idx, 2, item[2])
#layout
for i in range(mappingsList.GetColumnCount()):
mappingsList.SetColumnWidth(i, wx.LIST_AUTOSIZE_USEHEADER)
size = mappingsList.GetColumnWidth(i)
mappingsList.SetColumnWidth(i, wx.LIST_AUTOSIZE)
mappingsList.SetColumnWidth(i, max(size, mappingsList.GetColumnWidth(i) + 5))
houseCodeTextCtrl = TextCtrl(
panel,
mask = "XXXXXXXX",
choiceRequired = True,
validFunc = ValidChars,
defaultValue = "????????",
formatcodes = "F",
)
deviceAddressTextCtrl = TextCtrl(
panel,
mask = "XXXX",
choiceRequired = True,
validFunc = ValidChars,
defaultValue = "????",
formatcodes = "F",
)
groupNameCtrl = wx.TextCtrl(panel)
editSizer = wx.GridSizer(3, 2)
editSizer.Add(wx.StaticText(panel, -1, Text.houseCode + ":"), wx.ALIGN_CENTER_VERTICAL)
editSizer.Add(houseCodeTextCtrl, 0)
editSizer.Add(wx.StaticText(panel, -1, Text.deviceAddress + ":"), wx.ALIGN_CENTER_VERTICAL)
editSizer.Add(deviceAddressTextCtrl, 0)
editSizer.Add(wx.StaticText(panel, -1, Text.groupName + ":"), wx.ALIGN_CENTER_VERTICAL)
editSizer.Add(groupNameCtrl, 0)
addButton = wx.Button(panel, -1, Text.add)
updateButton = wx.Button(panel, -1, Text.update)
deleteButton = wx.Button(panel, -1, Text.delete)
buttonsSizer = wx.GridSizer(1, 3)
buttonsSizer.Add(addButton)
buttonsSizer.Add(deleteButton)
buttonsSizer.Add(updateButton)
houseCodeTextCtrl.Bind(wx.EVT_TEXT, EnableButtons)
deviceAddressTextCtrl.Bind(wx.EVT_TEXT, EnableButtons)
groupNameCtrl.Bind(wx.EVT_TEXT, EnableButtons);
addButton.Bind(wx.EVT_BUTTON, OnAddButton)
updateButton.Bind(wx.EVT_BUTTON, OnUpdateButton)
deleteButton.Bind(wx.EVT_BUTTON, OnDeleteButton)
mappingsList.Bind(wx.EVT_LIST_ITEM_SELECTED, OnItemSelected)
mappingsList.Bind(wx.EVT_LIST_ITEM_SELECTED, EnableButtons)
mappingsList.Bind(wx.EVT_LIST_ITEM_DESELECTED, EnableButtons)
EnableButtons(wx.CommandEvent())
panel.sizer.Add(wx.StaticText(panel, -1, Text.help0))
panel.sizer.Add(wx.StaticText(panel, -1, Text.help1))
panel.sizer.Add(mappingsList, 1, flag = wx.EXPAND)
panel.sizer.Add(editSizer)
panel.sizer.Add(buttonsSizer)
while panel.Affirmed():
newMappings = []
for i in range(0, mappingsList.GetItemCount()):
item = mappingsList.GetItem(i, 0).GetText(), \
mappingsList.GetItem(i, 1).GetText(), \
mappingsList.GetItem(i, 2).GetText()
newMappings.append(item)
panel.SetResult(newMappings)
class HID(eg.PluginClass):
def __init__(self):
self.thread = None
def RawCallback(self, data):
self.TriggerEvent(binascii.hexlify(data).upper())
def ButtonCallback(self, data):
global CAN_REPEAT_AGAIN_TIME
if len(data):
#one or more buttons pressed
btnPressed = []
if CAN_REPEAT_AGAIN_TIME < time.clock():
for num in data:
btnPressed.append(str(num))
evtName = "Button." + "+".join(btnPressed)
if self.enduringEvents:
self.TriggerEnduringEvent(evtName)
else:
self.TriggerEvent(evtName)
CAN_REPEAT_AGAIN_TIME = time.clock() + self.timeOut
elif self.enduringEvents:
#no buttons pressed anymore
self.EndLastEvent()
else:
#trigger event so that releasing all buttons
#can get noticed even w/o enduring events
self.TriggerEvent("Button.None")
def ValueCallback(self, data):
for key, value in data.items():
if key in self.oldValues and value == self.oldValues[key]:
continue
self.oldValues[key] = value
self.TriggerEvent("Value." + str(key), payload = value)
def StopCallback(self):
self.TriggerEvent("Stopped")
self.thread = None
def GetMyDevicePath(self):
path = GetDevicePath(
self.devicePath,
self.vendorID,
self.productID,
self.versionNumber,
self.useDeviceIndex,
self.deviceIndex,
self.noOtherPort)
return path;
def SetupHidThread(self, newDevicePath):
#create thread
self.thread = HIDThread(self.vendorString + " " + self.productString, newDevicePath)
self.thread.start()
self.thread.SetStopCallback(self.StopCallback)
if self.rawDataEvents:
self.thread.SetRawCallback(self.RawCallback)
else:
self.thread.SetButtonCallback(self.ButtonCallback)
self.thread.SetValueCallback(self.ValueCallback)
def ReconnectDevice(self, event):
"""method to reconnect a disconnect device"""
if self.thread == None:
if not IsDeviceName(event.payload, self.vendorID, self.productID):
return
#check if the right device was connected
#getting devicePath
newDevicePath = self.GetMyDevicePath()
if not newDevicePath:
#wrong device
return
self.SetupHidThread(newDevicePath)
def GetLabel(self,
eventName,
enduringEvents,
rawDataEvents,
noOtherPort,
devicePath,
vendorID,
vendorString,
productID,
productString,
versionNumber,
timeOut,
useDeviceIndex = False,
deviceIndex = 0
):
prefix = "HID-withInterval: "
#one or both strings empty should not happen
if not vendorString or not productString:
return "HID"
#productString already contains manufacturer or vendor id only
if productString.find(vendorString) != -1 or\
vendorString[0:len(Text.vendorID)] == Text.vendorID:
return prefix + productString
return prefix + vendorString + " " + productString
def __start__(self,
eventName,
enduringEvents,
rawDataEvents,
noOtherPort,
devicePath,
vendorID,
vendorString,
productID,
productString,
versionNumber,
timeOut,
useDeviceIndex = False,
deviceIndex = 0
):
#saving parameters so they can be used to reconnect a device
self.eventName = eventName
self.enduringEvents = enduringEvents
self.rawDataEvents = rawDataEvents
self.noOtherPort = noOtherPort
self.devicePath = devicePath
self.vendorID = vendorID
self.vendorString = vendorString
self.productID = productID
self.productString = productString
self.versionNumber = versionNumber
self.useDeviceIndex = useDeviceIndex
self.deviceIndex = deviceIndex
self.timeOut = timeOut
self.oldValues = {}
if eventName:
self.info.eventPrefix = eventName
else:
self.info.eventPrefix = "HID"
#Bind plug in to RegisterDeviceNotification message
eg.Bind("System.DeviceAttached", self.ReconnectDevice)
newDevicePath = self.GetMyDevicePath()
if not newDevicePath:
#device not found
self.PrintError(Text.errorFind)
else:
self.SetupHidThread(newDevicePath)
def __stop__(self):
if self.thread:
self.thread.AbortThread()
#unbind from RegisterDeviceNotification message
eg.Unbind("System.DeviceAttached", self.ReconnectDevice)
def Configure(self,
eventName = "",
enduringEvents = True,
rawDataEvents = False,
noOtherPort = False,
devicePath = None,
vendorID = None,
vendorString = None,
productID = None,
productString = None,
versionNumber = None,
timeOut = 0.15,
useDeviceIndex = False,
deviceIndex = 0,
):
deviceList = GetDeviceDescriptions()
panel = eg.ConfigPanel(self, resizable=True)
#building dialog
hidList = wx.ListCtrl(panel, -1, pos=wx.DefaultPosition,
size=wx.DefaultSize, style=wx.LC_REPORT | wx.LC_SINGLE_SEL)
#create GUI
hidList.InsertColumn(0, Text.deviceName)
hidList.InsertColumn(1, Text.manufacturer)
hidList.InsertColumn(2, Text.connected)
path = GetDevicePath(
devicePath,
vendorID,
productID,
versionNumber,
noOtherPort,
useDeviceIndex,
deviceIndex,
deviceList)
#fill list
devices = {}
idx = 0
for item in deviceList:
idx = hidList.InsertStringItem(sys.maxint, item.productString)
hidList.SetStringItem(idx, 1, item.vendorString)
hidList.SetStringItem(idx, 2, Text.yes)
if item.devicePath == path:
hidList.Select(idx)
devices[idx] = item
#add not connected device to bottom of list
if not path and devicePath:
item = DeviceDescription(
devicePath,
vendorID,
vendorString,
productID,
productString,
versionNumber)
idx = hidList.InsertStringItem(sys.maxint, item.productString)
hidList.SetStringItem(idx, 1, item.vendorString)
hidList.SetStringItem(idx, 2, Text.no)
hidList.Select(idx)
devices[idx] = item
#no device selected, disable ok and apply button
panel.EnableButtons(hidList.GetFirstSelected() != -1)
#layout
for i in range(hidList.GetColumnCount()):
hidList.SetColumnWidth(i, wx.LIST_AUTOSIZE_USEHEADER)
size = hidList.GetColumnWidth(i)
hidList.SetColumnWidth(i, wx.LIST_AUTOSIZE)
hidList.SetColumnWidth(i, max(size, hidList.GetColumnWidth(i) + 5))
panel.sizer.Add(hidList, 1, flag = wx.EXPAND)
#sizers
optionsSizer = wx.GridBagSizer(0, 5)
#eventname
optionsSizer.Add(
wx.StaticText(panel, -1, Text.eventName),
(0, 0),
flag = wx.ALIGN_CENTER_VERTICAL)
eventNameCtrl = wx.TextCtrl(panel, value = eventName)
eventNameCtrl.SetMaxLength(32)
optionsSizer.Add(eventNameCtrl, (0, 1), (1, 2), flag = wx.EXPAND)
#checkbox for enduring event option
enduringEventsCtrl = wx.CheckBox(panel, -1, Text.enduringEvents)
enduringEventsCtrl.SetValue(enduringEvents)
optionsSizer.Add(enduringEventsCtrl, (1, 0), (1, 3))
#checkbox for raw data events
rawDataEventsCtrl = wx.CheckBox(panel, -1, Text.rawDataEvents)
rawDataEventsCtrl.SetValue(rawDataEvents)
optionsSizer.Add(rawDataEventsCtrl, (2, 0), (1, 3))
#timeout interval control
optionsSizer.Add(
wx.StaticText(panel, -1, Text.timeOut),
(6, 0),
flag = wx.ALIGN_CENTER_VERTICAL)
timeOutControl = eg.SpinNumCtrl(panel, -1, timeOut)
optionsSizer.Add(timeOutControl, (6, 1), (1,4))
#text
optionsSizer.Add(
wx.StaticText(panel, -1, Text.multipleDeviceOptions),
(3, 0), (1, 3),
flag = wx.ALIGN_CENTER_VERTICAL)
#checkbox for use first device
useDeviceIndexCtrl = wx.CheckBox(panel, -1, Text.useDeviceIndex)
useDeviceIndexCtrl.SetValue(useDeviceIndex)
optionsSizer.Add(useDeviceIndexCtrl, (4, 0), (1, 2), flag = wx.ALIGN_LEFT | wx.ALIGN_CENTER_VERTICAL)
#device index spin control
deviceIndexCtrl = eg.SpinIntCtrl(panel, -1, deviceIndex, 0, 99, size=(100,-1))
optionsSizer.Add(deviceIndexCtrl, (4, 2), (1, 1))
#checkbox for no other port option
noOtherPortCtrl = wx.CheckBox(panel, -1, Text.noOtherPort)
noOtherPortCtrl.SetValue(noOtherPort)
optionsSizer.Add(noOtherPortCtrl, (5, 0), (1, 3))
panel.sizer.Add(optionsSizer, 0, wx.TOP, 10)
def OnHidListSelect(event):
panel.EnableButtons(hidList.GetFirstSelected() != -1)
event.Skip()
def OnRawDataEventsChange(event):
enduringEventsCtrl.Enable(not rawDataEventsCtrl.GetValue())
event.Skip()
def OnEnduringEventsChange(event):
rawDataEventsCtrl.Enable(not enduringEventsCtrl.GetValue())
event.Skip()
def OnUseDeviceIndexCtrlChange(event):
noOtherPortCtrl.Enable(not useDeviceIndexCtrl.GetValue())
deviceIndexCtrl.Enable(useDeviceIndexCtrl.GetValue())
event.Skip()
def OnNoOtherPortChange(event):
useDeviceIndexCtrl.Enable(not noOtherPortCtrl.GetValue())
deviceIndexCtrl.Enable(not noOtherPortCtrl.GetValue())
event.Skip()
OnRawDataEventsChange(wx.CommandEvent())
OnEnduringEventsChange(wx.CommandEvent())
OnUseDeviceIndexCtrlChange(wx.CommandEvent())
OnNoOtherPortChange(wx.CommandEvent())
rawDataEventsCtrl.Bind(wx.EVT_CHECKBOX, OnRawDataEventsChange)
enduringEventsCtrl.Bind(wx.EVT_CHECKBOX, OnEnduringEventsChange)
useDeviceIndexCtrl.Bind(wx.EVT_CHECKBOX, OnUseDeviceIndexCtrlChange)
noOtherPortCtrl.Bind(wx.EVT_CHECKBOX, OnNoOtherPortChange)
hidList.Bind(wx.EVT_LIST_ITEM_SELECTED, OnHidListSelect)
hidList.Bind(wx.EVT_LIST_ITEM_DESELECTED, OnHidListSelect)
while panel.Affirmed():
device = devices[hidList.GetFirstSelected()]
panel.SetResult(
eventNameCtrl.GetValue(),
enduringEventsCtrl.GetValue(),
rawDataEventsCtrl.GetValue(),
noOtherPortCtrl.GetValue(),
device.devicePath,
device.vendorId,
device.vendorString,
device.productId,
device.productString,
device.versionNumber,
timeOutControl.GetValue(),
useDeviceIndexCtrl.GetValue(),
deviceIndexCtrl.GetValue(),
)
class USB_RFID(eg.PluginClass):
text = Text
def __init__(self):
self.version = None
self.thread = None
self.AddNewAction("GreenLED", 0xf2, "Green LED", "Turn on green LED", "Turn on green LED for {0}0 ms")
self.AddNewAction("RedLED", 0xf1, "Red LED", "Turn on red LED", "Turn on red LED for {0}0 ms")
self.AddNewAction("Buzzer", 0xf3, "Buzzer", "Turn on buzzer", "Turn on buzzer for {0}0 ms")
def AddNewAction(self, internalName, classFuncCode, externalName, classDescription, classLabelFormat):
class MyText:
labelFormat = classLabelFormat
class tmpAction(ActionBase):
text = MyText
name = externalName
description = classDescription
funcCode = classFuncCode
tmpAction.__name__ = internalName
self.AddAction(tmpAction)
def RawCallback(self, data):
if eg.debugLevel:
print "USB_RFID RawCallBack", binascii.hexlify(data)
if len(data) != 9 or data[0:3] != "\x02\x07\xA0":
self.PrintError("data must have a length of 9 and start with 02 07 A0")
errorId = ord(data[3:4])
if errorId == 0:
pass
#everything is fine
elif errorId == 1:
#Firmware version was requested
self.version = ord(data[4:5])
elif errorId == 2:
#Firmware version was requested
self.version = ord(data[4:5])
elif errorId == 3:
self.PrintError("invalid command length")
elif errorId == 4 or errorId == 5:
eventstring = binascii.hexlify(data[4:5]).upper() + "." + binascii.hexlify(data[5:]).upper()
knownCode = False
for eventHandler in eg.eventTable.get(self.info.eventPrefix + "." + eventstring, []):
knownCode = True
break
self.TriggerEvent(eventstring)
if not knownCode:
self.TriggerEvent("Unknown")
else:
self.PrintError("Unknown Error")
def PrintVersion(self):
#create the following python command to show version number
#eg.plugins.USB-RFID.plugin.PrintVersion()
versionMajor = self.version / 16
versionMinor = self.version % 16
print "Firmware version %d.%d" % (versionMajor, versionMinor)
def StopCallback(self):
self.TriggerEvent("Stopped")
self.thread = None
def GetMyDevicePath(self):
path = GetDevicePath(
None,
VENDOR_ID,
PRODUCT_ID,
None,
0,
True,
0)
return path;
def SetupHidThread(self, newDevicePath):
#create thread
self.thread = HIDThread(self.name, newDevicePath, self.name)
self.thread.SetStopCallback(self.StopCallback)
self.thread.SetRawCallback(self.RawCallback)
self.thread.start()
self.thread.WaitForInit()
self.RequestVersion()
def RequestVersion(self):
self.thread.Write('\x01\x01\xf0\x00\x00', 1000)
def ReconnectDevice(self, event):
"""method to reconnect a disconnect device"""
if self.thread == None:
if not IsDeviceName(event.payload, VENDOR_ID, PRODUCT_ID):
return
#check if the right device was connected
#getting devicePath
newDevicePath = self.GetMyDevicePath()
if not newDevicePath:
#wrong device
return
self.SetupHidThread(newDevicePath)
def __start__(self):
#Bind plug in to RegisterDeviceNotification message
eg.Bind("System.DeviceAttached", self.ReconnectDevice)
newDevicePath = self.GetMyDevicePath()
if not newDevicePath:
#device not found
self.PrintError(Text.errorFind)
else:
self.SetupHidThread(newDevicePath)
def __stop__(self):
if self.thread:
self.thread.AbortThread()
#unbind from RegisterDeviceNotification message
eg.Unbind("System.DeviceAttached", self.ReconnectDevice)
class USB_RFID(eg.PluginClass):
text = Text
def __init__(self):
self.version = None
self.thread = None
self.AddNewAction("GreenLED", 0xf2, "Green LED", "Turn on green LED",
"Turn on green LED for {0}0 ms")
self.AddNewAction("RedLED", 0xf1, "Red LED", "Turn on red LED",
"Turn on red LED for {0}0 ms")
self.AddNewAction("Buzzer", 0xf3, "Buzzer", "Turn on buzzer",
"Turn on buzzer for {0}0 ms")
def AddNewAction(self, internalName, classFuncCode, externalName,
classDescription, classLabelFormat):
class MyText:
labelFormat = classLabelFormat
class tmpAction(ActionBase):
text = MyText
name = externalName
description = classDescription
funcCode = classFuncCode
tmpAction.__name__ = internalName
self.AddAction(tmpAction)
def RawCallback(self, data):
if eg.debugLevel:
print "USB_RFID RawCallBack", binascii.hexlify(data)
if len(data) != 9 or data[0:3] != "\x02\x07\xA0":
self.PrintError(
"data must have a length of 9 and start with 02 07 A0")
errorId = ord(data[3:4])
if errorId == 0:
pass
#everything is fine
elif errorId == 1:
#Firmware version was requested
self.version = ord(data[4:5])
elif errorId == 2:
#Firmware version was requested
self.version = ord(data[4:5])
elif errorId == 3:
self.PrintError("invalid command length")
elif errorId == 4 or errorId == 5:
eventstring = binascii.hexlify(
data[4:5]).upper() + "." + binascii.hexlify(data[5:]).upper()
knownCode = False
for eventHandler in eg.eventTable.get(
self.info.eventPrefix + "." + eventstring, []):
knownCode = True
break
self.TriggerEvent(eventstring)
if not knownCode:
self.TriggerEvent("Unknown")
else:
self.PrintError("Unknown Error")
def PrintVersion(self):
#create the following python command to show version number
#eg.plugins.USB-RFID.plugin.PrintVersion()
versionMajor = self.version / 16
versionMinor = self.version % 16
print "Firmware version %d.%d" % (versionMajor, versionMinor)
def StopCallback(self):
self.TriggerEvent("Stopped")
self.thread = None
def GetMyDevicePath(self):
path = GetDevicePath(None, VENDOR_ID, PRODUCT_ID, None, 0, True, 0)
return path
def SetupHidThread(self, newDevicePath):
#create thread
self.thread = HIDThread(self.name, newDevicePath, self.name)
self.thread.SetStopCallback(self.StopCallback)
self.thread.SetRawCallback(self.RawCallback)
self.thread.start()
self.thread.WaitForInit()
self.RequestVersion()
def RequestVersion(self):
self.thread.Write('\x01\x01\xf0\x00\x00', 1000)
def ReconnectDevice(self, event):
"""method to reconnect a disconnect device"""
if self.thread == None:
if not IsDeviceName(event.payload, VENDOR_ID, PRODUCT_ID):
return
#check if the right device was connected
#getting devicePath
newDevicePath = self.GetMyDevicePath()
if not newDevicePath:
#wrong device
return
self.SetupHidThread(newDevicePath)
def __start__(self):
#Bind plug in to RegisterDeviceNotification message
eg.Bind("System.DeviceAttached", self.ReconnectDevice)
newDevicePath = self.GetMyDevicePath()
if not newDevicePath:
#device not found
self.PrintError(Text.errorFind)
else:
self.SetupHidThread(newDevicePath)
def __stop__(self):
if self.thread:
self.thread.AbortThread()
#unbind from RegisterDeviceNotification message
eg.Unbind("System.DeviceAttached", self.ReconnectDevice)
def SetupHidThread(self, newDevicePath):
#create thread
self.thread = HIDThread(self.name, newDevicePath, self.name)
self.thread.start()
self.thread.SetStopCallback(self.StopCallback)
self.thread.SetButtonCallback(self.ButtonCallback)
