def test_magnetic_switch():
MAGNETIC_SWITCH = bytearray([
0x55, 0x00, 0x07, 0x07, 0x01, 0x7A, 0xD5, 0x08, 0x01, 0x82, 0x5D, 0xAB,
0x00, 0x03, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0xBA
])
packet = RadioPacket.create(rorg=RORG.BS1,
rorg_func=0x00,
rorg_type=0x01,
sender=[0x01, 0x82, 0x5D, 0xAB],
CO='open')
packet_serialized = packet.build()
assert len(packet_serialized) == len(MAGNETIC_SWITCH)
assert list(packet_serialized) == list(MAGNETIC_SWITCH)
assert packet.learn is False
MAGNETIC_SWITCH = bytearray([
0x55, 0x00, 0x07, 0x07, 0x01, 0x7A, 0xD5, 0x00, 0x01, 0x82, 0x5D, 0xAB,
0x00, 0x03, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x06
])
packet = RadioPacket.create(rorg=RORG.BS1,
rorg_func=0x00,
rorg_type=0x01,
sender=[0x01, 0x82, 0x5D, 0xAB],
learn=True,
CO='open')
packet_serialized = packet.build()
assert len(packet_serialized) == len(MAGNETIC_SWITCH)
assert list(packet_serialized) == list(MAGNETIC_SWITCH)
assert packet.learn is True
MAGNETIC_SWITCH = bytearray([
0x55, 0x00, 0x07, 0x07, 0x01, 0x7A, 0xD5, 0x09, 0x01, 0x82, 0x5D, 0xAB,
0x00, 0x03, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x2E
])
packet = RadioPacket.create(rorg=RORG.BS1,
rorg_func=0x00,
rorg_type=0x01,
sender=[0x01, 0x82, 0x5D, 0xAB],
CO='closed')
packet_serialized = packet.build()
assert len(packet_serialized) == len(MAGNETIC_SWITCH)
assert list(packet_serialized) == list(MAGNETIC_SWITCH)
assert packet.learn is False
MAGNETIC_SWITCH = bytearray([
0x55, 0x00, 0x07, 0x07, 0x01, 0x7A, 0xD5, 0x01, 0x01, 0x82, 0x5D, 0xAB,
0x00, 0x03, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x92
])
packet = RadioPacket.create(rorg=RORG.BS1,
rorg_func=0x00,
rorg_type=0x01,
sender=[0x01, 0x82, 0x5D, 0xAB],
learn=True,
CO='closed')
packet_serialized = packet.build()
assert len(packet_serialized) == len(MAGNETIC_SWITCH)
assert list(packet_serialized) == list(MAGNETIC_SWITCH)
assert packet.learn is True
def test_temperature():
TEMPERATURE = bytearray([
0x55, 0x00, 0x0A, 0x07, 0x01, 0xEB, 0xA5, 0x00, 0x00, 0x55, 0x08, 0x01,
0x81, 0xB7, 0x44, 0x00, 0x03, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x5C
])
packet = RadioPacket.create(
rorg=RORG.BS4,
rorg_func=0x02,
rorg_type=0x05,
sender=[0x01, 0x81, 0xB7, 0x44],
TMP=26.66666666666666666666666666666666666666666667)
packet_serialized = packet.build()
assert len(packet_serialized) == len(TEMPERATURE)
assert list(packet_serialized) == list(TEMPERATURE)
assert packet.learn is False
TEMPERATURE = bytearray([
0x55, 0x00, 0x0A, 0x07, 0x01, 0xEB, 0xA5, 0x00, 0x00, 0x55, 0x00, 0x01,
0x81, 0xB7, 0x44, 0x00, 0x03, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0xE0
])
packet = RadioPacket.create(
rorg=RORG.BS4,
rorg_func=0x02,
rorg_type=0x05,
sender=[0x01, 0x81, 0xB7, 0x44],
learn=True,
TMP=26.66666666666666666666666666666666666666666667)
packet_serialized = packet.build()
assert len(packet_serialized) == len(TEMPERATURE)
assert packet.learn is True
def test_packets_with_destination():
TEMPERATURE = bytearray([
0x55, 0x00, 0x0A, 0x07, 0x01, 0xEB, 0xA5, 0x00, 0x00, 0x55, 0x08, 0x01,
0x81, 0xB7, 0x44, 0x00, 0x03, 0xDE, 0xAD, 0xBE, 0xEF, 0xFF, 0x00, 0x5F
])
packet = RadioPacket.create(
rorg=RORG.BS4,
rorg_func=0x02,
rorg_type=0x05,
sender=[0x01, 0x81, 0xB7, 0x44],
destination=[0xDE, 0xAD, 0xBE, 0xEF],
TMP=26.66666666666666666666666666666666666666666667)
packet_serialized = packet.build()
assert len(packet_serialized) == len(TEMPERATURE)
assert list(packet_serialized) == list(TEMPERATURE)
assert packet.learn is False
assert packet.sender_int == 25278276
assert packet.destination_int == 3735928559
MAGNETIC_SWITCH = bytearray([
0x55, 0x00, 0x07, 0x07, 0x01, 0x7A, 0xD5, 0x08, 0x01, 0x82, 0x5D, 0xAB,
0x00, 0x03, 0xDE, 0xAD, 0xBE, 0xEF, 0xFF, 0x00, 0xB9
])
packet = RadioPacket.create(rorg=RORG.BS1,
rorg_func=0x00,
rorg_type=0x01,
sender=[0x01, 0x82, 0x5D, 0xAB],
destination=[0xDE, 0xAD, 0xBE, 0xEF],
CO='open')
packet_serialized = packet.build()
assert len(packet_serialized) == len(MAGNETIC_SWITCH)
assert list(packet_serialized) == list(MAGNETIC_SWITCH)
assert packet.learn is False
def test_temperature():
TEMPERATURE = bytearray([
0x55,
0x00, 0x0A, 0x07, 0x01,
0xEB,
0xA5, 0x00, 0x00, 0x55, 0x08, 0x01, 0x81, 0xB7, 0x44, 0x00,
0x03, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00,
0x5C
])
packet = RadioPacket.create(rorg=RORG.BS4, rorg_func=0x02, rorg_type=0x05, sender=[0x01, 0x81, 0xB7, 0x44], TMP=26.66666666666666666666666666666666666666666667)
packet_serialized = packet.build()
assert len(packet_serialized) == len(TEMPERATURE)
assert list(packet_serialized) == list(TEMPERATURE)
assert packet.learn is False
TEMPERATURE = bytearray([
0x55,
0x00, 0x0A, 0x07, 0x01,
0xEB,
0xA5, 0x00, 0x00, 0x55, 0x00, 0x01, 0x81, 0xB7, 0x44, 0x00,
0x03, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00,
0xE0
])
packet = RadioPacket.create(rorg=RORG.BS4, rorg_func=0x02, rorg_type=0x05, sender=[0x01, 0x81, 0xB7, 0x44], learn=True, TMP=26.66666666666666666666666666666666666666666667)
packet_serialized = packet.build()
assert len(packet_serialized) == len(TEMPERATURE)
assert packet.learn is True
def test_packets_with_destination():
TEMPERATURE = bytearray([
0x55,
0x00, 0x0A, 0x07, 0x01,
0xEB,
0xA5, 0x00, 0x00, 0x55, 0x08, 0x01, 0x81, 0xB7, 0x44, 0x00,
0x03, 0xDE, 0xAD, 0xBE, 0xEF, 0xFF, 0x00,
0x5F
])
packet = RadioPacket.create(rorg=RORG.BS4, rorg_func=0x02, rorg_type=0x05, sender=[0x01, 0x81, 0xB7, 0x44], destination=[0xDE, 0xAD, 0xBE, 0xEF], TMP=26.66666666666666666666666666666666666666666667)
packet_serialized = packet.build()
assert len(packet_serialized) == len(TEMPERATURE)
assert list(packet_serialized) == list(TEMPERATURE)
assert packet.learn is False
assert packet.sender_int == 25278276
assert packet.destination_int == 3735928559
MAGNETIC_SWITCH = bytearray([
0x55,
0x00, 0x07, 0x07, 0x01,
0x7A,
0xD5, 0x08, 0x01, 0x82, 0x5D, 0xAB, 0x00,
0x03, 0xDE, 0xAD, 0xBE, 0xEF, 0xFF, 0x00,
0xB9
])
packet = RadioPacket.create(rorg=RORG.BS1, rorg_func=0x00, rorg_type=0x01, sender=[0x01, 0x82, 0x5D, 0xAB], destination=[0xDE, 0xAD, 0xBE, 0xEF], CO='open')
packet_serialized = packet.build()
assert len(packet_serialized) == len(MAGNETIC_SWITCH)
assert list(packet_serialized) == list(MAGNETIC_SWITCH)
assert packet.learn is False
def test_magnetic_switch():
MAGNETIC_SWITCH = bytearray([
0x55,
0x00, 0x07, 0x07, 0x01,
0x7A,
0xD5, 0x08, 0x01, 0x82, 0x5D, 0xAB, 0x00,
0x03, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00,
0xBA
])
packet = RadioPacket.create(rorg=RORG.BS1, rorg_func=0x00, rorg_type=0x01, sender=[0x01, 0x82, 0x5D, 0xAB], CO='open')
packet_serialized = packet.build()
assert len(packet_serialized) == len(MAGNETIC_SWITCH)
assert list(packet_serialized) == list(MAGNETIC_SWITCH)
assert packet.learn is False
MAGNETIC_SWITCH = bytearray([
0x55,
0x00, 0x07, 0x07, 0x01,
0x7A,
0xD5, 0x00, 0x01, 0x82, 0x5D, 0xAB, 0x00,
0x03, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00,
0x06
])
packet = RadioPacket.create(rorg=RORG.BS1, rorg_func=0x00, rorg_type=0x01, sender=[0x01, 0x82, 0x5D, 0xAB], learn=True, CO='open')
packet_serialized = packet.build()
assert len(packet_serialized) == len(MAGNETIC_SWITCH)
assert list(packet_serialized) == list(MAGNETIC_SWITCH)
assert packet.learn is True
MAGNETIC_SWITCH = bytearray([
0x55,
0x00, 0x07, 0x07, 0x01,
0x7A,
0xD5, 0x09, 0x01, 0x82, 0x5D, 0xAB, 0x00,
0x03, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00,
0x2E
])
packet = RadioPacket.create(rorg=RORG.BS1, rorg_func=0x00, rorg_type=0x01, sender=[0x01, 0x82, 0x5D, 0xAB], CO='closed')
packet_serialized = packet.build()
assert len(packet_serialized) == len(MAGNETIC_SWITCH)
assert list(packet_serialized) == list(MAGNETIC_SWITCH)
assert packet.learn is False
MAGNETIC_SWITCH = bytearray([
0x55,
0x00, 0x07, 0x07, 0x01,
0x7A,
0xD5, 0x01, 0x01, 0x82, 0x5D, 0xAB, 0x00,
0x03, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00,
0x92
])
packet = RadioPacket.create(rorg=RORG.BS1, rorg_func=0x00, rorg_type=0x01, sender=[0x01, 0x82, 0x5D, 0xAB], learn=True, CO='closed')
packet_serialized = packet.build()
assert len(packet_serialized) == len(MAGNETIC_SWITCH)
assert list(packet_serialized) == list(MAGNETIC_SWITCH)
assert packet.learn is True
def _on_mqtt_message(self, mqtt_client, userdata, msg):
'''the callback for when a PUBLISH message is received from the MQTT server.'''
#1 parse topic %prefix%/%device%
topic = msg.topic.split('/')
if len(topic) < 3 or topic[2] != 'cmd':
return
# search for sensor
for cur_sensor in self.sensors:
if cur_sensor['name'] in topic[1]:
rorg = cur_sensor['rorg']
rorg_func = cur_sensor['func']
rorg_type = cur_sensor['type']
payload = json.loads(msg.payload)
command = payload.pop('CMD', 1)
packet = RadioPacket.create(rorg=rorg,
rorg_func=rorg_func,
rorg_type=rorg_type,
sender=self.enocean.base_id,
destination=cur_sensor['address'],
command=command,
**payload)
self.enocean.send(packet)
def assemble_radio_packet(transmitter_id):
return RadioPacket.create(rorg=RORG.BS4,
rorg_func=0x20,
rorg_type=0x01,
sender=transmitter_id,
CV=50,
TMP=21.5,
ES='true')
def assemble_radio_packet(transmitter_id, destination_id=None):
return RadioPacket.create(rorg=RORG.BS4,
rorg_func=0x10,
rorg_type=0x03,
sender=transmitter_id,
destination=destination_id,
SP=255,
TMP=10.0,
learn=False)
def set_position(destination, percentage):
global communicator
communicator.send(
RadioPacket.create(rorg=RORG.VLD,
rorg_func=0x05,
rorg_type=0x00,
destination=destination,
sender=communicator.base_id,
command=1,
POS=percentage))
def assemble_radio_packet(transmitter_id):
# print(transmitter_id)
# print(enocean.utils.from_hex_string('05:0F:11:A3'))
return RadioPacket.create(
rorg=RORG.VLD,
rorg_func=0x01,
rorg_type=0x0B,
sender=transmitter_id,
destination=enocean.utils.from_hex_string('05:0F:11:A3'),
command=1,
OV=100)
def send_command(destination, output_value):
global communicator
communicator.send(
RadioPacket.create(rorg=RORG.VLD,
rorg_func=0x01,
rorg_type=0x01,
destination=destination,
sender=communicator.base_id,
command=1,
IO=0x1E,
OV=output_value))
def test_switch():
SWITCH = bytearray([
0x55, 0x00, 0x07, 0x07, 0x01, 0x7A, 0xF6, 0x50, 0x00, 0x29, 0x89, 0x79,
0x30, 0x03, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x61
])
# test also enum setting by integer value with EB0
packet = RadioPacket.create(
rorg=RORG.RPS,
rorg_func=0x02,
rorg_type=0x02,
sender=[0x00, 0x29, 0x89, 0x79],
SA='No 2nd action',
EB=1,
R1='Button BI',
T21=True,
NU=True,
)
packet_serialized = packet.build()
assert len(packet_serialized) == len(SWITCH)
assert list(packet_serialized) == list(SWITCH)
SWITCH = bytearray([
0x55, 0x00, 0x07, 0x07, 0x01, 0x7A, 0xF6, 0x00, 0x00, 0x29, 0x89, 0x79,
0x20, 0x03, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0xD2
])
packet = RadioPacket.create(
rorg=RORG.RPS,
rorg_func=0x02,
rorg_type=0x02,
sender=[0x00, 0x29, 0x89, 0x79],
SA='No 2nd action',
EB='released',
T21=True,
NU=False,
)
packet_serialized = packet.build()
assert len(packet_serialized) == len(SWITCH)
assert list(packet_serialized) == list(SWITCH)
def test_switch():
SWITCH = bytearray([
0x55,
0x00, 0x07, 0x07, 0x01,
0x7A,
0xF6, 0x50, 0x00, 0x29, 0x89, 0x79, 0x30,
0x03, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00,
0x61
])
# test also enum setting by integer value with EB0
packet = RadioPacket.create(rorg=RORG.RPS, rorg_func=0x02, rorg_type=0x02, sender=[0x00, 0x29, 0x89, 0x79],
SA='No 2nd action',
EB=1,
R1='Button BI',
T21=True,
NU=True,
)
packet_serialized = packet.build()
assert len(packet_serialized) == len(SWITCH)
assert list(packet_serialized) == list(SWITCH)
SWITCH = bytearray([
0x55,
0x00, 0x07, 0x07, 0x01,
0x7A,
0xF6, 0x00, 0x00, 0x29, 0x89, 0x79, 0x20,
0x03, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00,
0xD2
])
packet = RadioPacket.create(rorg=RORG.RPS, rorg_func=0x02, rorg_type=0x02, sender=[0x00, 0x29, 0x89, 0x79],
SA='No 2nd action',
EB='released',
T21=True,
NU=False,
)
packet_serialized = packet.build()
assert len(packet_serialized) == len(SWITCH)
assert list(packet_serialized) == list(SWITCH)
def test_switch():
SWITCH = bytearray([
0x55,
0x00, 0x07, 0x07, 0x01,
0x7A,
0xF6, 0x50, 0x00, 0x29, 0x89, 0x79, 0x30,
0x03, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00,
0x61
])
p = RadioPacket.create(rorg=RORG.RPS, func=0x02, type=0x02, sender=[0x00, 0x29, 0x89, 0x79],
SA='No 2nd action',
EBO='pressed',
R1='Button BI',
T21=True,
NU=True,
)
packet_serialized = p.build()
assert len(packet_serialized) == len(SWITCH)
assert list(packet_serialized) == list(SWITCH)
SWITCH = bytearray([
0x55,
0x00, 0x07, 0x07, 0x01,
0x7A,
0xF6, 0x00, 0x00, 0x29, 0x89, 0x79, 0x20,
0x03, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00,
0xD2
])
p = RadioPacket.create(rorg=RORG.RPS, func=0x02, type=0x02, sender=[0x00, 0x29, 0x89, 0x79],
SA='No 2nd action',
EBO='released',
T21=True,
NU=False,
)
packet_serialized = p.build()
assert len(packet_serialized) == len(SWITCH)
assert list(packet_serialized) == list(SWITCH)
def create_packet(cls, eep: Eep, destination=None, sender=None, learn=False, **kwargs):
destination_id = destination or 0xffffffff
if type(destination_id) == int:
destination_id = EnoceanTools.int_to_byte_list(destination_id)
sender_id = sender or cls._sender_id
if type(sender_id) == int:
sender_id = EnoceanTools.int_to_byte_list(sender_id)
return RadioPacket.create(
eep.rorg, eep.func, eep.type, direction=eep.direction, command=eep.command,
destination=destination_id,
sender=sender_id,
learn=learn,
**kwargs
)
def _reply_packet(self, in_packet, sensor):
'''send enocean message as a reply to an incoming message'''
# prepare addresses
destination = in_packet.sender
# prepare packet
if 'direction' in sensor:
# we invert the direction in this reply
direction = 1 if sensor['direction'] == 2 else 2
else:
direction = None
packet = RadioPacket.create(RORG.BS4,
sensor['func'],
sensor['type'],
direction=direction,
sender=self.enocean_sender,
destination=destination,
learn=in_packet.learn)
# assemble data based on packet type (learn / data)
if not in_packet.learn:
# data packet received
# start with default data
packet.data[1:5] = [(sensor['default_data'] >> i & 0xff)
for i in (24, 16, 8, 0)]
# do we have specific data to send?
if 'data' in sensor:
# override with specific data settings
packet.set_eep(sensor['data'])
else:
# what to do if we have no data to send yet?
logging.warn('sending default data as answer to %s',
sensor['name'])
else:
# learn request received
# copy EEP and manufacturer ID
packet.data[1:5] = in_packet.data[1:5]
# update flags to acknowledge learn request
packet.data[4] = 0xf0
# send it
logging.info('sending: {}'.format(packet))
self.enocean.send(packet)
def test_vld():
SWITCH = bytearray([
0x55,
0x00, 0x09, 0x07, 0x01,
0x56,
0xD2, 0x01, 0x1E, 0x64, 0xDE, 0xAD, 0xBE, 0xEF, 0x00,
0x03, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00,
0x5A
])
packet = RadioPacket.create(rorg=RORG.VLD, rorg_func=0x01, rorg_type=0x01, command=1, DV=0, IO=0x1E, OV=0x64)
packet_serialized = packet.build()
assert len(packet_serialized) == len(SWITCH)
assert list(packet_serialized) == list(SWITCH)
assert packet.parsed['CMD']['raw_value'] == 0x01
assert packet.parsed['IO']['raw_value'] == 0x1E
assert packet.parsed['IO']['value'] == 'All output channels supported by the device'
assert packet.parsed['DV']['value'] == 'Switch to new output value'
assert packet.parsed['OV']['value'] == 'Output value 100% or ON'
def test_vld():
SWITCH = bytearray([
0x55,
0x00, 0x09, 0x07, 0x01,
0x56,
0xD2, 0x01, 0x1E, 0x64, 0xDE, 0xAD, 0xBE, 0xEF, 0x00,
0x03, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00,
0x5A
])
packet = RadioPacket.create(rorg=RORG.VLD, rorg_func=0x01, rorg_type=0x01, command=1, DV=0, IO=0x1E, OV=0x64)
packet_serialized = packet.build()
assert len(packet_serialized) == len(SWITCH)
assert list(packet_serialized) == list(SWITCH)
assert packet.parsed['CMD']['raw_value'] == 0x01
assert packet.parsed['IO']['raw_value'] == 0x1E
assert packet.parsed['IO']['value'] == 'All output channels supported by the device'
assert packet.parsed['DV']['value'] == 'Switch to new output value'
assert packet.parsed['OV']['value'] == 'Output value 100% or ON'
def send_command(message, learn=False, immediate=False):
kwargs = {}
command = None
generic = ''
direction = None
delay = False
learn = False
type = ''
raw = ''
sender = globals.COMMUNICATOR.base_id
commandRorg = int(message['profile']['rorg'], 16)
commandFunc = utils.from_hex_string(message['profile']['func'])
commandType = utils.from_hex_string(message['profile']['type'])
commandDestination = utils.destination_sender_to_list(message['dest'])
for data in message['command']:
if data == 'command':
command = int(message['command'][data])
elif data == 'direction':
direction = int(message['command'][data])
elif data == 'type':
type = message['command'][data]
elif data == 'delay':
delay = message['command'][data]
elif data == 'profil':
profil = message['command'][data]
else:
try:
kwargs[data] = int(message['command'][data])
except:
kwargs[data] = message['command'][data]
logging.debug(
str(kwargs) + ' on command ' + str(command) + ' ' + str(commandRorg) +
' ' + str(commandFunc) + ' ' + str(commandType))
globals.COMMUNICATOR.send(
RadioPacket.create(rorg=commandRorg,
rorg_func=commandFunc,
rorg_type=commandType,
destination=commandDestination,
sender=sender,
learn=learn,
command=command,
direction=direction,
**kwargs))
def _reply_packet(self, in_packet, sensor):
'''send enocean message as a reply to an incoming message'''
# prepare addresses
destination = in_packet.sender
# prepare packet
if 'direction' in sensor:
# we invert the direction in this reply
direction = 1 if sensor['direction'] == 2 else 2
else:
direction = None
packet = RadioPacket.create(RORG.BS4, sensor['func'], sensor['type'], direction=direction,
sender=self.enocean_sender, destination=destination, learn=in_packet.learn)
# assemble data based on packet type (learn / data)
if not in_packet.learn:
# data packet received
# start with default data
packet.data[1:5] = [ (sensor['default_data'] >> i & 0xff) for i in (24,16,8,0) ]
# do we have specific data to send?
if 'data' in sensor:
# override with specific data settings
packet.set_eep(sensor['data'])
else:
# what to do if we have no data to send yet?
logging.warn('sending default data as answer to %s', sensor['name'])
else:
# learn request received
# copy EEP and manufacturer ID
packet.data[1:5] = in_packet.data[1:5]
# update flags to acknowledge learn request
packet.data[4] = 0xf0
# send it
logging.info('sending: {}'.format(packet))
self.enocean.send(packet)
def test_illegal_eep_enum1():
RadioPacket.create(rorg=RORG.RPS,
func=0x02,
type=0x02,
sender=[0x00, 0x29, 0x89, 0x79],
EBO='inexisting')
def test_illegal_eep_enum1():
RadioPacket.create(rorg=RORG.RPS, func=0x02, type=0x02, sender=[0x00, 0x29, 0x89, 0x79], EBO='inexisting')
def _send_packet(self, sensor, destination, command=None,
negate_direction=False, learn_data=None):
'''triggers sending of an enocean packet'''
# determine direction indicator
if 'direction' in sensor:
direction = sensor['direction']
if negate_direction:
# we invert the direction in this reply
direction = 1 if direction == 2 else 2
else:
direction = None
# is this a response to a learn packet?
is_learn = learn_data is not None
# Add possibility for the user to indicate a specific sender address
# in sensor configuration using added 'sender' field.
# So use specified sender address if any
if 'sender' in sensor:
sender = [(sensor['sender'] >> i*8) & 0xff for i in reversed(range(4))]
else:
sender = self.enocean_sender
try:
# Now pass command to RadioPacket.create()
packet = RadioPacket.create(sensor['rorg'], sensor['func'], sensor['type'],
direction=direction, command=command, sender=sender,
destination=destination, learn=is_learn)
except ValueError as err:
logging.error("Cannot create RF packet: %s", err)
return
# assemble data based on packet type (learn / data)
if not is_learn:
# data packet received
# start with default data
# Initialize packet with default_data if specified
if 'default_data' in sensor:
packet.data[1:5] = [(sensor['default_data'] >> i*8) &
0xff for i in reversed(range(4))]
# do we have specific data to send?
if 'data' in sensor:
# override with specific data settings
logging.debug("sensor data: %s", sensor['data'])
packet.set_eep(sensor['data'])
packet.parse_eep() # ensure that the logging output of packet is updated
else:
# what to do if we have no data to send yet?
logging.warning('sending only default data as answer to %s', sensor['name'])
else:
# learn request received
# copy EEP and manufacturer ID
packet.data[1:5] = learn_data[1:5]
# update flags to acknowledge learn request
packet.data[4] = 0xf0
# send it
logging.info("sending: %s", packet)
self.enocean.send(packet)
def test_illegal_eep_enum2():
RadioPacket.create(rorg=RORG.RPS,
rorg_func=0x02,
rorg_type=0x02,
sender=[0x00, 0x29, 0x89, 0x79],
EB=2)
def send_command(message, learn=False, immediate=False):
kwargs = {}
command = None
generic = ''
direction = None
delay = False
learn = False
type = ''
raw = ''
sender = globals.COMMUNICATOR.base_id
commandRorg = int(message['profile']['rorg'], 16)
commandFunc = utils.from_hex_string(message['profile']['func'])
commandType = utils.from_hex_string(message['profile']['type'])
commandDestination = utils.destination_sender_to_list(message['dest'])
for data in message['command']:
if data == 'command':
command = int(message['command'][data])
elif data == 'direction':
direction = int(message['command'][data])
elif data == 'type':
type = message['command'][data]
elif data == 'delay':
delay = message['command'][data]
elif data == 'generic':
generic = message['command'][data]
elif data == 'learn':
learn = message['command'][data]
elif data == 'profil':
profil = message['command'][data]
elif data == 'raw':
raw = message['command'][data]
else:
try:
kwargs[data] = int(message['command'][data])
except:
kwargs[data] = message['command'][data]
if learn <> False and learn <> '1':
send_learn(learn, message)
return
if learn == '1':
learn = True
if delay and not immediate:
globals.STORAGE_MESSAGE[message['dest']] = message
logging.debug('Storing message')
return
logging.debug(
str(kwargs) + ' on command ' + str(command) + ' ' + str(commandRorg) +
' ' + str(commandFunc) + ' ' + str(commandType))
if generic <> '':
if type == 'switch':
sender = utils.destination_sender_to_list(generic)
commandDestination = None
globals.COMMUNICATOR.send(
RadioPacket.create(rorg=commandRorg,
rorg_func=commandFunc,
rorg_type=commandType,
destination=commandDestination,
sender=sender,
learn=learn,
command=command,
direction=direction,
EB=1,
**kwargs))
globals.COMMUNICATOR.send(
RadioPacket.create(rorg=commandRorg,
rorg_func=commandFunc,
rorg_type=commandType,
destination=commandDestination,
sender=sender,
learn=learn,
command=command,
direction=direction,
EB=0,
**kwargs))
return
else:
sender = utils.destination_sender_to_list(generic)
commandDestination = None
if raw <> '':
rawhandler.send(commandRorg, raw, sender)
return
globals.COMMUNICATOR.send(
RadioPacket.create(rorg=commandRorg,
rorg_func=commandFunc,
rorg_type=commandType,
destination=commandDestination,
sender=sender,
learn=learn,
command=command,
direction=direction,
**kwargs))
def test_illegal_eep_enum2():
RadioPacket.create(rorg=RORG.RPS, rorg_func=0x02, rorg_type=0x02, sender=[0x00, 0x29, 0x89, 0x79], EB=2)
def send_command(destination, output_value):
global communicator
communicator.send(
RadioPacket.create(rorg=RORG.VLD, rorg_func=0x01, rorg_type=0x01, destination=destination, sender=communicator.base_id, command=1, IO=0x1E, OV=output_value)
)
def test_packet_assembly():
PACKET_CONTENT_1 = bytearray([
0x55, 0x00, 0x0A, 0x00, 0x01, 0x80, 0xA5, 0x00, 0x00, 0x00, 0x00, 0xDE,
0xAD, 0xBE, 0xEF, 0x00, 0x18
])
PACKET_CONTENT_2 = bytearray([
0x55, 0x00, 0x0A, 0x07, 0x01, 0xEB, 0xA5, 0x00, 0x00, 0x00, 0x00, 0xDE,
0xAD, 0xBE, 0xEF, 0x00, 0x03, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0xE4
])
PACKET_CONTENT_3 = bytearray([
0x55, 0x00, 0x0A, 0x07, 0x01, 0xEB, 0xA5, 0x32, 0x20, 0x89, 0x00, 0xDE,
0xAD, 0xBE, 0xEF, 0x00, 0x03, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x43
])
PACKET_CONTENT_4 = bytearray([
0x55, 0x00, 0x0A, 0x07, 0x01, 0xEB, 0xA5, 0x32, 0x00, 0x00, 0x00, 0xDE,
0xAD, 0xBE, 0xEF, 0x00, 0x03, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x80
])
# manually assemble packet
packet = Packet(PACKET.RADIO_ERP1)
packet.rorg = RORG.BS4
sender_bytes = [(0xdeadbeef >> i & 0xff) for i in (24, 16, 8, 0)]
data = [0, 0, 0, 0]
packet.data = [packet.rorg] + data + sender_bytes + [0]
# test content
packet_serialized = packet.build()
assert len(packet_serialized) == len(PACKET_CONTENT_1)
assert list(packet_serialized) == list(PACKET_CONTENT_1)
# set optional data
sub_tel_num = 3
destination = [255, 255, 255, 255] # broadcast
dbm = 0xff
security = 0
packet.optional = [sub_tel_num] + destination + [dbm] + [security]
# test content
packet_serialized = packet.build()
assert len(packet_serialized) == len(PACKET_CONTENT_2)
assert list(packet_serialized) == list(PACKET_CONTENT_2)
# update data based on EEP
packet.select_eep(0x20, 0x01, 1)
prop = {
'CV': 50,
'TMP': 21.5,
'ES': 'true',
}
packet.set_eep(prop)
# test content
packet_serialized = packet.build()
assert len(packet_serialized) == len(PACKET_CONTENT_3)
assert list(packet_serialized) == list(PACKET_CONTENT_3)
assert packet.rorg_func == 0x20
assert packet.rorg_type == 0x01
# Test the easier method of sending packets.
packet = Packet.create(PACKET.RADIO_ERP1,
rorg=RORG.BS4,
rorg_func=0x20,
rorg_type=0x01,
learn=True,
direction=1,
**prop)
packet_serialized = packet.build()
assert len(packet_serialized) == len(PACKET_CONTENT_3)
assert list(packet_serialized) == list(PACKET_CONTENT_3)
assert packet.rorg_func == 0x20
assert packet.rorg_type == 0x01
# Test creating RadioPacket directly.
packet = RadioPacket.create(rorg=RORG.BS4,
rorg_func=0x20,
rorg_type=0x01,
learn=True,
direction=2,
SP=50)
packet_serialized = packet.build()
assert len(packet_serialized) == len(PACKET_CONTENT_4)
assert list(packet_serialized) == list(PACKET_CONTENT_4)
assert packet.rorg_func == 0x20
assert packet.rorg_type == 0x01
def assemble_radio_packet(transmitter_id):
return RadioPacket.create(rorg=RORG.BS4, rorg_func=0x20, rorg_type=0x01,
sender=transmitter_id,
CV=50,
TMP=21.5,
ES='true')
def test_packet_assembly():
PACKET_CONTENT_1 = bytearray([
0x55,
0x00, 0x0A, 0x00, 0x01,
0x80,
0xA5, 0x00, 0x00, 0x00, 0x00, 0xDE, 0xAD, 0xBE, 0xEF, 0x00,
0x18
])
PACKET_CONTENT_2 = bytearray([
0x55,
0x00, 0x0A, 0x07, 0x01,
0xEB,
0xA5, 0x00, 0x00, 0x00, 0x00, 0xDE, 0xAD, 0xBE, 0xEF, 0x00,
0x03, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00,
0xE4
])
PACKET_CONTENT_3 = bytearray([
0x55,
0x00, 0x0A, 0x07, 0x01,
0xEB,
0xA5, 0x32, 0x20, 0x89, 0x00, 0xDE, 0xAD, 0xBE, 0xEF, 0x00,
0x03, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00,
0x43
])
PACKET_CONTENT_4 = bytearray([
0x55,
0x00, 0x0A, 0x07, 0x01,
0xEB,
0xA5, 0x32, 0x00, 0x00, 0x00, 0xDE, 0xAD, 0xBE, 0xEF, 0x00,
0x03, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00,
0x80
])
# manually assemble packet
packet = Packet(PACKET.RADIO_ERP1)
packet.rorg = RORG.BS4
sender_bytes = [(0xdeadbeef >> i & 0xff) for i in (24, 16, 8, 0)]
data = [0, 0, 0, 0]
packet.data = [packet.rorg] + data + sender_bytes + [0]
# test content
packet_serialized = packet.build()
assert len(packet_serialized) == len(PACKET_CONTENT_1)
assert list(packet_serialized) == list(PACKET_CONTENT_1)
# set optional data
sub_tel_num = 3
destination = [255, 255, 255, 255] # broadcast
dbm = 0xff
security = 0
packet.optional = [sub_tel_num] + destination + [dbm] + [security]
# test content
packet_serialized = packet.build()
assert len(packet_serialized) == len(PACKET_CONTENT_2)
assert list(packet_serialized) == list(PACKET_CONTENT_2)
# update data based on EEP
packet.select_eep(0x20, 0x01, 1)
prop = {
'CV': 50,
'TMP': 21.5,
'ES': 'true',
}
packet.set_eep(prop)
# test content
packet_serialized = packet.build()
assert len(packet_serialized) == len(PACKET_CONTENT_3)
assert list(packet_serialized) == list(PACKET_CONTENT_3)
assert packet.rorg_func == 0x20
assert packet.rorg_type == 0x01
# Test the easier method of sending packets.
packet = Packet.create(PACKET.RADIO_ERP1, rorg=RORG.BS4, rorg_func=0x20, rorg_type=0x01, learn=True, direction=1, **prop)
packet_serialized = packet.build()
assert len(packet_serialized) == len(PACKET_CONTENT_3)
assert list(packet_serialized) == list(PACKET_CONTENT_3)
assert packet.rorg_func == 0x20
assert packet.rorg_type == 0x01
# Test creating RadioPacket directly.
packet = RadioPacket.create(rorg=RORG.BS4, rorg_func=0x20, rorg_type=0x01, learn=True, direction=2, SP=50)
packet_serialized = packet.build()
assert len(packet_serialized) == len(PACKET_CONTENT_4)
assert list(packet_serialized) == list(PACKET_CONTENT_4)
assert packet.rorg_func == 0x20
assert packet.rorg_type == 0x01
def create_enocean_teach_in(sender):
packet_response = RadioPacket.create(RORG.BS4, 0x20, 0x1, sender=sender)
packet_response.data[1:5] = [0x40, 0x18, 0x2d, 0x80]
packet_response.parsed = OrderedDict({})
return packet_response
def set_position(destination, percentage):
global communicator
communicator.send(
RadioPacket.create(rorg=RORG.VLD, rorg_func=0x05, rorg_type=0x00, destination=destination, sender=communicator.base_id, command=1, POS=percentage)
)