def rotate(self, valve_open):
## TODO: Use timer to turn off motor
status_led.fast_blink()
for i in range(1000): ## try for 10 sec
if valve_open == (self.contact.value() == config.VALVE_OPEN_VAL):
break
self.motor.on()
sleep_ms(10)
self.motor.off()
if valve_open:
status_led.on()
else:
status_led.off()
def run(self, state):
print(wifi.uid())
status_led.slow_blink()
wifi.connect(secrets.WIFI_NAME, secrets.WIFI_PASSWORD)
status_led.fast_blink()
if reset_cause() == DEEPSLEEP_RESET:
self.mqtt.do_pub_cfg = False
self.mqtt.connect()
else:
self.mqtt.try_pub_cfg()
self.pub_state(None)
status_led.off()
self.mqtt.wait(led=status_led)
def __init__(self, state):
print(wifi.uid())
if reset_cause() != DEEPSLEEP_RESET:
status_led.slow_blink()
wifi.connect(secrets.WIFI_NAME, secrets.WIFI_PASSWORD)
status_led.off()
mqtt = MQTT(config.NAME, secrets, uid=UID)
opt = dict(exp_aft=config.FREQ * 2.5)
if 'temp' in state:
from home_assistant.sensors.temperature import Temperature
mqtt.add('Temp', Temperature, **opt).set_state(state['temp'])
if 'humid' in state:
from home_assistant.sensors.humidity import Humidity
mqtt.add('Humid', Humidity, **opt).set_state(state['humid'])
if 'lux' in state:
from home_assistant.sensors.illuminance import Illuminance
mqtt.add('Lux', Illuminance, **opt).set_state(state['lux'])
if 'analog' in state:
mqtt.add('Analog', Sensor, unit="%", icon="mdi:gauge",
**opt).set_state(state['analog'])
if 'battery' in state:
from home_assistant.sensors.battery import Battery
mqtt.add('Battery', Battery, key='bat',
**opt).set_state(state['battery'])
mqtt.set_attr('battery', state['battery'])
mqtt.set_attr("freq", config.FREQ)
if wifi.is_connected():
if reset_cause() != DEEPSLEEP_RESET:
status_led.fast_blink()
mqtt.connect()
sleep(1)
mqtt.pub_state()
status_led.off()
sleep(5)
mqtt.discon()
sleep(5)
def __init__(self, state):
self.update_on = ('count', 'battery_level')
print(wifi.uid())
status_led.slow_blink()
wifi.connect(secrets.WIFI_NAME, secrets.WIFI_PASSWORD)
status_led.off()
self.mqtt = MQTT(config.NAME, secrets)
counter = self.mqtt.add(
'Counter',
Sensor,
unit=config.UNIT,
icon='mdi:counter',
)
if config.BATT:
battery = self.mqtt.add('Battery', Battery)
status_led.fast_blink()
state.mqtt = self.mqtt.try_pub_cfg()
status_led.off()
self._sched = False
def pub_state(_):
status_led.on()
self._sched = False
counter.set_state(state.count)
if config.BATT:
battery.set_state(state.battery)
counter.set_attr('battery', state.battery)
state.set(mqtt=self.mqtt.pub_state())
status_led.off()
self.pub_state = pub_state
def start(self, hub):
if hub.internet:
status_led.fast_blink()
wifi.connect(secrets.WIFI_NAME, secrets.WIFI_PASSWORD)
status_led.off()
sleep(2)
if wifi.is_connected():
status_led.fast_blink()
self.mqtt = MQTT(config.NAME, secrets, uid=UID)
self.mqtt.add('Water',
Moisture,
prim=True,
key='water',
off_dly=config.NORMAL_SLEEP).set_state(hub.water)
enable = self.mqtt.add('Enable', Switch, icon="mdi:bell")
def enable_rx(msg):
hub.set(enable=msg == enable.ON)
self.mqtt.sub(enable.cmd_tpc(), enable_rx)
self.mqtt.add('Battery', Battery,
key='bat').set_state(hub.battery)
self.mqtt.set_attr('battery', hub.battery)
self.mqtt.set_attr('rssi', wifi.rssi())
self.mqtt.do_pub_cfg = self.do_pub_cfg
self.mqtt.connect()
sleep(1)
self.mqtt.pub_state()
sleep(1)
status_led.off()