def to_code(config):
var = cg.new_Pvariable(config[CONF_ID])
yield cg.register_component(var, config)
yield i2c.register_i2c_device(var, config)
cg.add(var.set_integration_time(config[CONF_INTEGRATION_TIME]))
cg.add(var.set_gain(config[CONF_GAIN]))
if CONF_RED_CHANNEL in config:
sens = yield sensor.new_sensor(config[CONF_RED_CHANNEL])
cg.add(var.set_red_sensor(sens))
if CONF_GREEN_CHANNEL in config:
sens = yield sensor.new_sensor(config[CONF_GREEN_CHANNEL])
cg.add(var.set_green_sensor(sens))
if CONF_BLUE_CHANNEL in config:
sens = yield sensor.new_sensor(config[CONF_BLUE_CHANNEL])
cg.add(var.set_blue_sensor(sens))
if CONF_CLEAR_CHANNEL in config:
sens = yield sensor.new_sensor(config[CONF_CLEAR_CHANNEL])
cg.add(var.set_clear_sensor(sens))
if CONF_ILLUMINANCE in config:
sens = yield sensor.new_sensor(config[CONF_ILLUMINANCE])
cg.add(var.set_illuminance_sensor(sens))
if CONF_COLOR_TEMPERATURE in config:
sens = yield sensor.new_sensor(config[CONF_COLOR_TEMPERATURE])
cg.add(var.set_color_temperature_sensor(sens))
def to_code(config):
var = cg.new_Pvariable(config[CONF_ID])
yield cg.register_component(var, config)
yield sensor.register_sensor(var, config)
yield i2c.register_i2c_device(var, config)
cg.add(var.set_resolution(config[CONF_RESOLUTION]))
def to_code(config):
var = cg.new_Pvariable(config[CONF_ID])
yield cg.register_component(var, config)
cg.add(var.set_signal_rate_limit(config[CONF_SIGNAL_RATE_LIMIT]))
cg.add(var.set_long_range(config[CONF_LONG_RANGE]))
yield sensor.register_sensor(var, config)
yield i2c.register_i2c_device(var, config)
def to_code(config):
var = cg.new_Pvariable(config[CONF_ID])
yield cg.register_component(var, config)
yield i2c.register_i2c_device(var, config)
if CONF_PM_1_0 in config:
sens = yield sensor.new_sensor(config[CONF_PM_1_0])
cg.add(var.set_pm_1_0_sensor(sens))
if CONF_PM_2_5 in config:
sens = yield sensor.new_sensor(config[CONF_PM_2_5])
cg.add(var.set_pm_2_5_sensor(sens))
if CONF_PM_10_0 in config:
sens = yield sensor.new_sensor(config[CONF_PM_10_0])
cg.add(var.set_pm_10_0_sensor(sens))
if CONF_AQI in config:
sens = yield sensor.new_sensor(config[CONF_AQI])
cg.add(var.set_aqi_sensor(sens))
cg.add(
var.set_aqi_calculation_type(
config[CONF_AQI][CONF_CALCULATION_TYPE]))
# https://platformio.org/lib/show/6306/Grove%20-%20Laser%20PM2.5%20Sensor%20HM3301
cg.add_library('6306', '1.0.3')
def to_code(config):
var = cg.new_Pvariable(config[CONF_ID])
yield cg.register_component(var, config)
if CONF_IRQ_PIN in config:
irq_pin = yield cg.gpio_pin_expression(config[CONF_IRQ_PIN])
cg.add(var.set_irq_pin(irq_pin))
yield i2c.register_i2c_device(var, config)
def to_code(config):
var = cg.new_Pvariable(config[CONF_ID])
yield cg.register_component(var, config)
yield i2c.register_i2c_device(var, config)
cg.add(var.set_automatic_self_calibration(config[CONF_AUTOMATIC_SELF_CALIBRATION]))
if CONF_ALTITUDE_COMPENSATION in config:
cg.add(var.set_altitude_compensation(config[CONF_ALTITUDE_COMPENSATION]))
if CONF_AMBIENT_PRESSURE_COMPENSATION in config:
cg.add(var.set_ambient_pressure_compensation(config[CONF_AMBIENT_PRESSURE_COMPENSATION]))
if CONF_TEMPERATURE_OFFSET in config:
cg.add(var.set_temperature_offset(config[CONF_TEMPERATURE_OFFSET]))
if CONF_CO2 in config:
sens = yield sensor.new_sensor(config[CONF_CO2])
cg.add(var.set_co2_sensor(sens))
if CONF_HUMIDITY in config:
sens = yield sensor.new_sensor(config[CONF_HUMIDITY])
cg.add(var.set_humidity_sensor(sens))
if CONF_TEMPERATURE in config:
sens = yield sensor.new_sensor(config[CONF_TEMPERATURE])
cg.add(var.set_temperature_sensor(sens))
def to_code(config):
var = cg.new_Pvariable(config[CONF_ID])
yield cg.register_component(var, config)
yield i2c.register_i2c_device(var, config)
if CONF_ECO2 in config:
sens = yield sensor.new_sensor(config[CONF_ECO2])
cg.add(var.set_eco2_sensor(sens))
if CONF_TVOC in config:
sens = yield sensor.new_sensor(config[CONF_TVOC])
cg.add(var.set_tvoc_sensor(sens))
if CONF_BASELINE in config:
baseline_config = config[CONF_BASELINE]
cg.add(var.set_eco2_baseline(baseline_config[CONF_ECO2_BASELINE]))
cg.add(var.set_tvoc_baseline(baseline_config[CONF_TVOC_BASELINE]))
if CONF_COMPENSATION in config:
compensation_config = config[CONF_COMPENSATION]
sens = yield cg.get_variable(compensation_config[CONF_HUMIDITY_SOURCE])
cg.add(var.set_humidity_sensor(sens))
sens = yield cg.get_variable(
compensation_config[CONF_TEMPERATURE_SOURCE])
cg.add(var.set_temperature_sensor(sens))
def to_code(config):
var = cg.new_Pvariable(config[CONF_ID])
yield cg.register_component(var, config)
yield i2c.register_i2c_device(var, config)
cg.add(var.set_pin(config[CONF_PIN]))
cg.add(var.set_pin_pullup(config[CONF_PIN_PULLUP]))
cg.add(var.set_filter(config[CONF_PULSE_WIDTH_FILTER]))
if CONF_FREQUENCY in config:
sens = yield sensor.new_sensor(config[CONF_FREQUENCY])
cg.add(var.set_frequency_sensor(sens))
if CONF_PWM in config:
sens = yield sensor.new_sensor(config[CONF_PWM])
cg.add(var.set_pwm_sensor(sens))
if CONF_MAX_FREQUENCY in config:
sens = yield sensor.new_sensor(config[CONF_MAX_FREQUENCY])
cg.add(var.set_max_frequency_sensor(sens))
if CONF_MAX_PWM in config:
sens = yield sensor.new_sensor(config[CONF_MAX_PWM])
cg.add(var.set_max_pwm_sensor(sens))
if CONF_MIN_FREQUENCY in config:
sens = yield sensor.new_sensor(config[CONF_MIN_FREQUENCY])
cg.add(var.set_min_frequency_sensor(sens))
if CONF_MIN_PWM in config:
sens = yield sensor.new_sensor(config[CONF_MIN_PWM])
cg.add(var.set_min_pwm_sensor(sens))
def to_code(config):
var = cg.new_Pvariable(config[CONF_ID])
yield cg.register_component(var, config)
yield i2c.register_i2c_device(var, config)
yield sensor.register_sensor(var, config)
update_period = config[CONF_UPDATE_INTERVAL].total_seconds
cg.add(var.set_config(determine_config_register(update_period)))
def to_code(config):
var = cg.new_Pvariable(config[CONF_ID])
yield cg.register_component(var, config)
yield i2c.register_i2c_device(var, config)
cg.add(var.set_temperature_offset(config[CONF_TEMP_OFFSET]))
cg.add(var.set_iaq_mode(config[CONF_IAQ_MODE]))
cg.add(var.set_state_save_interval(config[CONF_STATE_SAVE_INTERVAL]))
def to_code(config):
var = cg.new_Pvariable(config[CONF_ID])
cg.add(var.set_touch_debounce(config[CONF_TOUCH_DEBOUNCE]))
cg.add(var.set_release_debounce(config[CONF_RELEASE_DEBOUNCE]))
cg.add(var.set_touch_threshold(config[CONF_TOUCH_THRESHOLD]))
cg.add(var.set_release_threshold(config[CONF_RELEASE_THRESHOLD]))
yield cg.register_component(var, config)
yield i2c.register_i2c_device(var, config)
def to_code(config):
var = cg.new_Pvariable(config[CONF_ID])
yield cg.register_component(var, config)
yield sensor.register_sensor(var, config)
yield i2c.register_i2c_device(var, config)
cg.add(var.set_resolution(config[CONF_RESOLUTION]))
cg.add(var.set_measurement_duration(config[CONF_MEASUREMENT_DURATION]))
def to_code(config):
var = cg.new_Pvariable(config[CONF_ID])
yield cg.register_component(var, config)
yield i2c.register_i2c_device(var, config)
if CONF_BATTERY_LEVEL in config:
conf = config[CONF_BATTERY_LEVEL]
sens = yield sensor.new_sensor(conf)
cg.add(var.set_batterylevel_sensor(sens))
def to_code(config):
var = cg.new_Pvariable(config[CONF_ID])
yield cg.register_component(var, config)
yield i2c.register_i2c_device(var, config)
yield sensor.register_sensor(var, config)
cg.add(var.set_integration_time(config[CONF_INTEGRATION_TIME]))
cg.add(var.set_gain(config[CONF_GAIN]))
cg.add(var.set_is_cs_package(config[CONF_IS_CS_PACKAGE]))
def to_code(config):
var = cg.new_Pvariable(config[CONF_ID])
yield lcd_base.setup_lcd_display(var, config)
yield i2c.register_i2c_device(var, config)
if CONF_LAMBDA in config:
lambda_ = yield cg.process_lambda(
config[CONF_LAMBDA], [(PCF8574LCDDisplay.operator('ref'), 'it')],
return_type=cg.void)
cg.add(var.set_writer(lambda_))
def to_code(config):
var = cg.new_Pvariable(config[CONF_ID])
yield cg.register_component(var, config)
yield i2c.register_i2c_device(var, config)
if CONF_KEYPAD in config:
keypad = config[CONF_KEYPAD]
cg.add(
var.set_rows_cols(keypad[CONF_KEY_ROWS], keypad[CONF_KEY_COLUMNS]))
if CONF_SLEEP_TIME in keypad and CONF_SCAN_TIME in keypad and CONF_DEBOUNCE_TIME in keypad:
cg.add(var.set_sleep_time(keypad[CONF_SLEEP_TIME]))
cg.add(var.set_scan_time(keypad[CONF_SCAN_TIME]))
cg.add(var.set_debounce_time(keypad[CONF_DEBOUNCE_TIME]))
def to_code(config):
var = cg.new_Pvariable(config[CONF_ID])
yield cg.register_component(var, config)
yield i2c.register_i2c_device(var, config)
if CONF_TEMPERATURE in config:
sens = yield sensor.new_sensor(config[CONF_TEMPERATURE])
cg.add(var.set_temperature_sensor(sens))
if CONF_HUMIDITY in config:
sens = yield sensor.new_sensor(config[CONF_HUMIDITY])
cg.add(var.set_humidity_sensor(sens))
def to_code(config):
var = cg.new_Pvariable(config[CONF_ID])
yield cg.register_component(var, config)
yield i2c.register_i2c_device(var, config)
cg.add(var.set_standard_units(config[CONF_STANDARD_UNITS]))
for key, funcName in TYPES.items():
if key in config:
sens = yield sensor.new_sensor(config[key])
cg.add(getattr(var, funcName)(sens))
def to_code(config):
var = cg.new_Pvariable(config[CONF_ID])
yield cg.register_component(var, config)
cg.add(var.set_signal_rate_limit(config[CONF_SIGNAL_RATE_LIMIT]))
cg.add(var.set_long_range(config[CONF_LONG_RANGE]))
cg.add(var.set_timeout_us(config[CONF_TIMEOUT]))
if CONF_ENABLE_PIN in config:
enable = yield cg.gpio_pin_expression(config[CONF_ENABLE_PIN])
cg.add(var.set_enable_pin(enable))
yield sensor.register_sensor(var, config)
yield i2c.register_i2c_device(var, config)
def to_code(config):
var = cg.new_Pvariable(config[CONF_ID])
yield cg.register_component(var, config)
yield i2c.register_i2c_device(var, config)
cg.add(var.set_temperature_offset(config[CONF_TEMPERATURE_OFFSET]))
cg.add(var.set_iaq_mode(config[CONF_IAQ_MODE]))
cg.add(
var.set_state_save_interval(
config[CONF_STATE_SAVE_INTERVAL].total_milliseconds))
cg.add_build_flag('-DUSING_BSEC')
cg.add_library('BSEC Software Library', '1.6.1480')
def to_code(config):
var = cg.new_Pvariable(config[CONF_ID])
yield cg.register_component(var, config)
yield i2c.register_i2c_device(var, config)
cg.add(var.set_temperature_offset(config[CONF_TEMPERATURE_OFFSET]))
cg.add(var.set_iaq_mode(config[CONF_IAQ_MODE]))
cg.add(var.set_sample_rate(config[CONF_SAMPLE_RATE]))
cg.add(
var.set_state_save_interval(config[CONF_STATE_SAVE_INTERVAL].total_milliseconds)
)
cg.add_define("USE_BSEC")
cg.add_library("BSEC Software Library", "1.6.1480")
def to_code(config):
var = cg.new_Pvariable(config[CONF_ID])
yield cg.register_component(var, config)
yield i2c.register_i2c_device(var, config)
if CONF_TEMPERATURE in config:
conf = config[CONF_TEMPERATURE]
sens = yield sensor.new_sensor(conf)
cg.add(var.set_temperature(sens))
if CONF_PRESSURE in config:
conf = config[CONF_PRESSURE]
sens = yield sensor.new_sensor(conf)
cg.add(var.set_pressure(sens))
def to_code(config):
var = cg.new_Pvariable(config[CONF_ID])
yield cg.register_component(var, config)
yield i2c.register_i2c_device(var, config)
cg.add(var.set_gain_value(config[CONF_GAIN]))
cg.add(var.set_res_value(config[CONF_RESOLUTION]))
cg.add(var.set_wfac_value(config[CONF_WFAC]))
for key, funcName in TYPES.items():
if key in config:
sens = yield sensor.new_sensor(config[key])
cg.add(getattr(var, funcName)(sens))
def to_code(config):
var = cg.new_Pvariable(config[CONF_ID])
yield cg.register_component(var, config)
yield i2c.register_i2c_device(var, config)
for key in [
CONF_VOLTAGE, CONF_CURRENT_A, CONF_CURRENT_B, CONF_ACTIVE_POWER_A,
CONF_ACTIVE_POWER_B
]:
if key not in config:
continue
conf = config[key]
sens = yield sensor.new_sensor(conf)
cg.add(getattr(var, f'set_{key}_sensor')(sens))
def to_code(config):
var = cg.new_Pvariable(config[CONF_ID])
yield cg.register_component(var, config)
yield i2c.register_i2c_device(var, config)
cg.add(var.set_precision_value(config[CONF_PRECISION]))
cg.add(var.set_heater_power_value(config[CONF_HEATER_POWER]))
cg.add(var.set_heater_time_value(config[CONF_HEATER_TIME]))
cg.add(var.set_heater_duty_value(config[CONF_HEATER_MAX_DUTY]))
for key, funcName in TYPES.items():
if key in config:
sens = yield sensor.new_sensor(config[key])
cg.add(getattr(var, funcName)(sens))
def to_code(config):
var = cg.new_Pvariable(config[CONF_ID])
yield cg.register_component(var, config)
yield display.register_display(var, config)
yield i2c.register_i2c_device(var, config)
if CONF_LAMBDA in config:
lambda_ = yield cg.process_lambda(
config[CONF_LAMBDA], [(HT16K33AlphaDisplay.operator('ref'), 'it')],
return_type=cg.void)
cg.add(var.set_writer(lambda_))
if config[CONF_SCROLL]:
cg.add(var.set_scroll(True))
cg.add(var.set_scroll_speed(config[CONF_SCROLL_SPEED]))
cg.add(var.set_scroll_dwell(config[CONF_SCROLL_DWELL]))
cg.add(
var.set_scroll_delay(
int(config[CONF_SCROLL_DELAY] *
config[CONF_SCROLL_SPEED].total_milliseconds)))
if CONF_SECONDARY_DISPLAYS in config:
for conf in config[CONF_SECONDARY_DISPLAYS]:
disp = cg.new_Pvariable(conf[CONF_ID])
yield i2c.register_i2c_device(disp, conf)
cg.add(var.add_secondary_display(disp))
def to_code(config):
var = cg.new_Pvariable(config[CONF_ID])
yield cg.register_component(var, config)
yield i2c.register_i2c_device(var, config)
if CONF_BATTERY_LEVEL in config:
sens = yield sensor.new_sensor(config[CONF_BATTERY_LEVEL])
cg.add(var.set_cellRemPercent_sensor(sens))
if CONF_BATTERY_VOLTAGE in config:
sens = yield sensor.new_sensor(config[CONF_BATTERY_VOLTAGE])
cg.add(var.set_cellVoltage_sensor(sens))
if "cell_charge" in config:
sens = yield sensor.new_sensor(config["cell_charge"])
cg.add(var.set_cellCharge_sensor(sens))
def to_code(config):
var = cg.new_Pvariable(config[CONF_ID])
yield cg.register_component(var, config)
yield i2c.register_i2c_device(var, config)
yield sensor.register_sensor(var, config)
if CONF_COMPENSATION in config:
compensation_config = config[CONF_COMPENSATION]
sens = yield cg.get_variable(compensation_config[CONF_HUMIDITY_SOURCE])
cg.add(var.set_humidity_sensor(sens))
sens = yield cg.get_variable(compensation_config[CONF_TEMPERATURE_SOURCE])
cg.add(var.set_temperature_sensor(sens))
cg.add(var.set_store_baseline(config[CONF_STORE_BASELINE]))
if CONF_VOC_BASELINE in config:
cg.add(var.set_voc_baseline(CONF_VOC_BASELINE))
def to_code(config):
var = cg.new_Pvariable(config[CONF_ID])
yield cg.register_component(var, config)
yield i2c.register_i2c_device(var, config)
for d in ["x", "y", "z"]:
accel_key = f"accel_{d}"
if accel_key in config:
sens = yield sensor.new_sensor(config[accel_key])
cg.add(getattr(var, f"set_accel_{d}_sensor")(sens))
accel_key = f"gyro_{d}"
if accel_key in config:
sens = yield sensor.new_sensor(config[accel_key])
cg.add(getattr(var, f"set_gyro_{d}_sensor")(sens))
if CONF_TEMPERATURE in config:
sens = yield sensor.new_sensor(config[CONF_TEMPERATURE])
cg.add(var.set_temperature_sensor(sens))
def to_code(config):
var = cg.new_Pvariable(config[CONF_ID])
yield cg.register_component(var, config)
yield i2c.register_i2c_device(var, config)
for d in ['x', 'y', 'z']:
accel_key = 'accel_{}'.format(d)
if accel_key in config:
sens = yield sensor.new_sensor(config[accel_key])
cg.add(getattr(var, 'set_accel_{}_sensor'.format(d))(sens))
accel_key = 'gyro_{}'.format(d)
if accel_key in config:
sens = yield sensor.new_sensor(config[accel_key])
cg.add(getattr(var, 'set_gyro_{}_sensor'.format(d))(sens))
if CONF_TEMPERATURE in config:
sens = yield sensor.new_sensor(config[CONF_TEMPERATURE])
cg.add(var.set_temperature_sensor(sens))
