def default_traits_view(self):
'''
Generates the view from the param items.
'''
param_items = [Item(name) for name in self.param_keys]
ctrl_items = [Item(name) for name in self.ctrl_keys]
view = View(VGroup(*param_items, id='stats.spirrid.rf.params'),
VGroup(*ctrl_items, id='stats.spirrid.rf.ctrl'),
kind='modal',
height=0.3,
width=0.2,
scrollable=True,
resizable=True,
buttons=['OK', 'Cancel'],
id='stats.spirrid.rf')
return view
def default_traits_view(self):
'''
Generates the view from the param items.
'''
rf_param_items = [
Item('model.' + name, format_str='%g')
for name in self.model.param_keys
]
plot_param_items = [
Item('eps_max'),
Item('n_eps'),
Item('x_name', label='x-axis'),
Item('y_name', label='y-axis')
]
control_items = [
Item('show', show_label=False),
Item('clear', show_label=False),
]
view = View(HSplit(
VGroup(*rf_param_items,
label='Function Parameters',
id='stats.spirrid_bak.rf_model_view.rf_params',
scrollable=True),
VGroup(*plot_param_items,
label='Plot Parameters',
id='stats.spirrid_bak.rf_model_view.plot_params'),
VGroup(
Item('model.comment', show_label=False, style='readonly'),
label='Comment',
id='stats.spirrid_bak.rf_model_view.comment',
scrollable=True,
),
VGroup(HGroup(*control_items),
Item('figure',
editor=MPLFigureEditor(),
resizable=True,
show_label=False),
label='Plot',
id='stats.spirrid_bak.rf_model_view.plot'),
dock='tab',
id='stats.spirrid_bak.rf_model_view.split'),
kind='modal',
resizable=True,
dock='tab',
buttons=['Ok', 'Cancel'],
id='stats.spirrid_bak.rf_model_view')
return view
class ECBLCalibStateModelView(ModelView):
'''Model in a viewable window.
'''
model = Instance(ECBLCalibState)
def _model_default(self):
return ECBLCalibState()
cs_state = Property(Instance(ECBCrossSectionState), depends_on = 'model')
@cached_property
def _get_cs_state(self):
return self.model.cs_state
data_changed = Event
figure = Instance(Figure)
def _figure_default(self):
figure = Figure(facecolor = 'white')
return figure
replot = Button()
def _replot_fired(self):
ax = self.figure.add_subplot(1, 1, 1)
self.model.calibrated_ecb_law.plot(ax)
self.data_changed = True
clear = Button()
def _clear_fired(self):
self.figure.clear()
self.data_changed = True
calibrated_ecb_law = Property(Instance(ECBLBase), depends_on = 'model')
@cached_property
def _get_calibrated_ecb_law(self):
return self.model.calibrated_ecb_law
view = View(HSplit(VGroup(
Item('cs_state', label = 'Cross section', show_label = False),
Item('model@', show_label = False),
Item('calibrated_ecb_law@', show_label = False, resizable = True),
),
Group(HGroup(
Item('replot', show_label = False),
Item('clear', show_label = False),
),
Item('figure', editor = MPLFigureEditor(),
resizable = True, show_label = False),
id = 'simexdb.plot_sheet',
label = 'plot sheet',
dock = 'tab',
),
),
width = 0.5,
height = 0.4,
buttons = ['OK', 'Cancel'],
resizable = True)
def default_traits_view(self):
'''
Generates the view from the param items.
'''
#rf_param_items = [ Item( 'model.' + name, format_str = '%g' ) for name in self.model.param_keys ]
D2_plot_param_items = [
VGroup(Item('max_x', label='max x value'),
Item('x_points', label='No of plot points'))
]
if hasattr(self.rf, 'get_q_x'):
D3_plot_param_items = [
VGroup(Item('min_x', label='min x value'),
Item('max_x', label='max x value'),
Item('min_y', label='min y value'),
Item('max_y', label='max y value'))
]
else:
D3_plot_param_items = []
control_items = [
Item('show', show_label=False),
Item('clear', show_label=False),
]
view = View(
HSplit(
VGroup(Item('@rf', show_label=False),
label='Function parameters',
id='stats.spirrid_bak.rf_model_view.rf_params',
scrollable=True),
VGroup(HGroup(*D2_plot_param_items),
label='plot parameters',
id='stats.spirrid_bak.rf_model_view.2Dplot_params'),
# VGroup( HGroup( *D3_plot_param_items ),
# label = '3D plot parameters',
# id = 'stats.spirrid_bak.rf_model_view.3Dplot_params' ),
VGroup(
Item('model.comment', show_label=False, style='readonly'),
label='Comment',
id='stats.spirrid_bak.rf_model_view.comment',
scrollable=True,
),
VGroup(HGroup(*control_items),
Item('figure',
editor=MPLFigureEditor(),
resizable=True,
show_label=False),
label='Plot',
id='stats.spirrid_bak.rf_model_view.plot'),
dock='tab',
id='stats.spirrid_bak.rf_model_view.split'),
kind='modal',
resizable=True,
dock='tab',
buttons=[OKButton],
id='stats.spirrid_bak.rf_model_view')
return view
def default_traits_view(self):
'''checks the number of shape parameters of the distribution and adds them to
the view instance'''
label = str(self.distribution.name)
if self.distribution.shapes == None:
params = Item()
if self.mean == infty:
moments = Item(label='No finite moments defined')
else:
moments = Item('mean', label='mean'), \
Item('variance', label='variance'), \
Item('stdev', label='st. deviation', style='readonly')
elif len(self.distribution.shapes) == 1:
params = Item('shape', label='shape')
if self.mean == infty:
moments = Item(label='No finite moments defined')
else:
moments = Item('mean', label='mean'), \
Item('variance', label='variance'), \
Item('stdev', label='st. deviation', style='readonly'), \
Item('skewness', label='skewness'), \
Item('kurtosis', label='kurtosis'),
else:
params = Item()
moments = Item()
view = View(VGroup(Label(label, emphasized=True),
Group(params,
Item('loc', label='location'),
Item('scale', label='scale'),
Item('loc_zero', label='loc = 0.0'),
show_border=True,
label='parameters',
id='pdistrib.distribution.params'),
Group(
moments,
id='pdistrib.distribution.moments',
show_border=True,
label='moments',
),
id='pdistrib.distribution.vgroup'),
kind='live',
resizable=True,
id='pdistrib.distribution.view')
return view
class ExpBT3PT(ExType):
'''Experiment: Bending Test Three Point
'''
# label = Str('three point bending test')
implements(IExType)
file_ext = 'raw'
#--------------------------------------------------------------------
# register a change of the traits with metadata 'input'
#--------------------------------------------------------------------
input_change = Event
@on_trait_change('+input, ccs.input_change, +ironing_param')
def _set_input_change(self):
self.input_change = True
#--------------------------------------------------------------------------------
# specify inputs:
#--------------------------------------------------------------------------------
length = Float(0.46,
unit='m',
input=True,
table_field=True,
auto_set=False,
enter_set=True)
width = Float(0.1,
unit='m',
input=True,
table_field=True,
auto_set=False,
enter_set=True)
thickness = Float(0.02,
unit='m',
input=True,
table_field=True,
auto_set=False,
enter_set=True)
# age of the concrete at the time of testing
age = Int(33,
unit='d',
input=True,
table_field=True,
auto_set=False,
enter_set=True)
loading_rate = Float(4.0,
unit='mm/min',
input=True,
table_field=True,
auto_set=False,
enter_set=True)
#--------------------------------------------------------------------------
# composite cross section
#--------------------------------------------------------------------------
ccs = Instance(CompositeCrossSection)
def _ccs_default(self):
'''default settings
'''
# fabric_layout_key = 'MAG-07-03'
# fabric_layout_key = '2D-02-06a'
fabric_layout_key = '2D-05-11'
# fabric_layout_key = '2D-09-12'
# concrete_mixture_key = 'PZ-0708-1'
# concrete_mixture_key = 'FIL-10-09'
concrete_mixture_key = 'barrelshell'
orientation_fn_key = 'all0'
# orientation_fn_key = 'all90'
# orientation_fn_key = '90_0'
n_layers = 6
s_tex_z = 0.020 / (n_layers + 1)
ccs = CompositeCrossSection(fabric_layup_list=[
plain_concrete(s_tex_z * 0.5),
FabricLayUp(n_layers=n_layers,
orientation_fn_key=orientation_fn_key,
s_tex_z=s_tex_z,
fabric_layout_key=fabric_layout_key),
plain_concrete(s_tex_z * 0.5)
],
concrete_mixture_key=concrete_mixture_key)
return ccs
#--------------------------------------------------------------------------
# Get properties of the composite
#--------------------------------------------------------------------------
# E-modulus of the composite at the time of testing
E_c = Property(Float,
unit='MPa',
depends_on='input_change',
table_field=True)
def _get_E_c(self):
return self.ccs.get_E_c_time(self.age)
# E-modulus of the composite after 28 days
E_c28 = DelegatesTo('ccs', listenable=False)
# reinforcement ration of the composite
rho_c = DelegatesTo('ccs', listenable=False)
#--------------------------------------------------------------------------------
# define processing
#--------------------------------------------------------------------------------
# flag distinguishes weather data from a displacement gauge is available
# stored in a separate ASC-file with a corresponding file name
#
flag_ASC_file = Bool(False)
def _read_data_array(self):
''' Read the experiment data.
'''
if exists(self.data_file):
print 'READ FILE'
file_split = self.data_file.split('.')
# first check if a '.csv' file exists. If yes use the
# data stored in the '.csv'-file and ignore
# the data in the '.raw' file!
#
file_name = file_split[0] + '.csv'
if not os.path.exists(file_name):
file_name = file_split[0] + '.raw'
if not os.path.exists(file_name):
raise IOError, 'file %s does not exist' % file_name
print 'file_name', file_name
_data_array = loadtxt_bending(file_name)
self.data_array = _data_array
# check if a '.ASC'-file exists. If yes append this information
# to the data array.
#
file_name = file_split[0] + '.ASC'
if not os.path.exists(file_name):
print 'NOTE: no data from displacement gauge is available (no .ASC file)'
self.flag_ASC_file = False
else:
print 'NOTE: additional data from displacement gauge for center deflection is available (.ASC-file loaded)!'
self.flag_ASC_file = True
# add data array read in from .ASC-file; the values are assigned by '_set_array_attribs' based on the
# read in values in 'names_and_units' read in from the corresponding .DAT-file
#
self.data_array_ASC = loadtxt(file_name, delimiter=';')
else:
print 'WARNING: data_file with path %s does not exist == False' % (
self.data_file)
names_and_units = Property(depends_on='data_file')
@cached_property
def _get_names_and_units(self):
'''names and units corresponding to the returned '_data_array' by 'loadtxt_bending'
'''
names = ['w_raw', 'eps_c_raw', 'F_raw']
units = ['mm', '1*E-3', 'N']
print 'names, units from .raw-file', names, units
return names, units
names_and_units_ASC = Property(depends_on='data_file')
@cached_property
def _get_names_and_units_ASC(self):
''' Extract the names and units of the measured data.
The order of the names in the .DAT-file corresponds
to the order of the .ASC-file.
'''
file_split = self.data_file.split('.')
file_name = file_split[0] + '.DAT'
data_file = open(file_name, 'r')
lines = data_file.read().split()
names = []
units = []
for i in range(len(lines)):
if lines[i] == '#BEGINCHANNELHEADER':
name = lines[i + 1].split(',')[1]
unit = lines[i + 3].split(',')[1]
names.append(name)
units.append(unit)
print 'names, units extracted from .DAT-file', names, units
return names, units
factor_list_ASC = Property(depends_on='data_file')
def _get_factor_list_ASC(self):
return self.names_and_units_ASC[0]
def _set_array_attribs(self):
'''Set the measured data as named attributes defining slices into
the processed data array.
'''
for i, factor in enumerate(self.factor_list):
self.add_trait(
factor,
Array(value=self.processed_data_array[:, i], transient=True))
if self.flag_ASC_file:
for i, factor in enumerate(self.factor_list_ASC):
self.add_trait(
factor,
Array(value=self.data_array_ASC[:, i], transient=True))
elastomer_law = Property(depends_on='input_change')
@cached_property
def _get_elastomer_law(self):
elastomer_path = os.path.join(simdb.exdata_dir, 'bending_tests',
'three_point',
'2011-06-10_BT-3PT-12c-6cm-0-TU_ZiE',
'elastomer_f-w.raw')
_data_array_elastomer = loadtxt_bending(elastomer_path)
# force [kN]:
# NOTE: after conversion 'F_elastomer' is a positive value
#
F_elastomer = -0.001 * _data_array_elastomer[:, 2].flatten()
# displacement [mm]:
# NOTE: after conversion 'w_elastomer' is a positive value
#
w_elastomer = -1.0 * _data_array_elastomer[:, 0].flatten()
mfn_displacement_elastomer = MFnLineArray(xdata=F_elastomer,
ydata=w_elastomer)
return frompyfunc(mfn_displacement_elastomer.get_value, 1, 1)
w_wo_elast = Property(depends_on='input_change')
@cached_property
def _get_w_wo_elast(self):
# use the machine displacement for the center displacement:
# subtract the deformation of the elastomer cushion between the cylinder
# and change sign in positive values for vertical displacement [mm]
#
return self.w_raw - self.elastomer_law(self.F_raw)
M_ASC = Property(Array('float_'), depends_on='input_change')
@cached_property
def _get_M_ASC(self):
return self.F_ASC * self.length / 4.0
M_raw = Property(Array('float_'), depends_on='input_change')
@cached_property
def _get_M_raw(self):
return self.F_raw * self.length / 4.0
# # get only the ascending branch of the response curve
# #
# max_force_idx = Property(Int)
# def _get_max_force_idx(self):
# '''get the index of the maximum force'''
# return argmax(-self.Kraft)
#
# f_asc = Property(Array)
# def _get_f_asc(self):
# '''get only the ascending branch of the response curve'''
# return -self.Kraft[:self.max_force_idx + 1]
K_bending_elast = Property(Array('float_'), depends_on='input_change')
@cached_property
def _get_K_bending_elast(self):
'''calculate the analytical bending stiffness of the beam (3 point bending)
'''
t = self.thickness
w = self.width
L = self.length
# coposite E-modulus
#
E_c = self.E_c
# moment of inertia
#
I_yy = t**3 * w / 12.
delta_11 = (L**3) / 48 / E_c / I_yy
# [MN/m]=[kN/mm] bending stiffness with respect to a force applied at center of the beam
#
K_bending_elast = 1 / delta_11
# print 'K_bending_elast', K_bending_elast
return K_bending_elast
F_cr = Property(Array('float_'), depends_on='input_change')
@cached_property
def _get_F_cr(self):
'''calculate the analytical cracking load of the beam
'''
t = self.thickness
w = self.width
L = self.length
# approx. flectural tensile strength
#
f_cfl = 6. # MPa
# resistant moment
#
W_yy = t**2 * w / 6.
# analytical cracking load of the beam
# corresponds to l = 0.46m and f_cfl = approx. 8.4 MPa#
#
F_cr = W_yy * f_cfl * 1000. / L # [kN]
return F_cr
def process_source_data(self):
'''read in the measured data from file and assign
attributes after array processing.
'''
super(ExpBT3PT, self).process_source_data()
#---------------------------------------------
# process data from .raw file (machine data)
#---------------------------------------------
# convert machine force [N] to [kN] and return only positive values
#
self.F_raw *= -0.001
# convert machine displacement [mm] to positive values
# and remove offset
#
self.w_raw *= -1.0
self.w_raw -= self.w_raw[0]
# convert [permille] to [-] and return only positive values
#
self.eps_c_raw *= -0.001
# access the derived arrays to initiate their processing
#
self.w_wo_elast
self.M_raw
#---------------------------------------------
# process data from .ASC file (displacement gauge)
#---------------------------------------------
# only if separate ASC.-file with force-displacement data from displacement gauge is available
#
if self.flag_ASC_file == True:
self.F_ASC = -1.0 * self.Kraft
# remove offset and change sign to return positive displacement values
#
if hasattr(self, "WA50"):
self.WA50 *= -1
self.WA50 -= self.WA50[0]
WA50_avg = np.average(self.WA50)
if hasattr(self, "W10_u"):
self.W10_u *= -1
self.W10_u -= self.W10_u[0]
W10_u_avg = np.average(self.W10_u)
# check which displacement gauge has been used depending on weather two names are listed in .DAT file or only one
# and assign values to 'w_ASC'
#
if hasattr(self, "W10_u") and hasattr(self, "WA50"):
if W10_u_avg > WA50_avg:
self.w_ASC = self.W10_u
print 'self.W10_u assigned to self.w_ASC'
else:
self.w_ASC = self.WA50
print 'self.WA50 assigned to self.w_ASC'
elif hasattr(self, "W10_u"):
self.w_ASC = self.W10_u
print 'self.W10_u assigned to self.w_ASC'
elif hasattr(self, "WA50"):
self.w_ASC = self.WA50
print 'self.WA50 assigned to self.w_ASC'
# convert strain from [permille] to [-],
# switch to positive values for compressive strains
# and remove offset
#
self.eps_c_ASC = -0.001 * self.DMS_l
self.eps_c_ASC -= self.eps_c_ASC[0]
# access the derived arrays to initiate their processing
#
self.M_ASC
#--------------------------------------------------------------------------------
# plot templates
#--------------------------------------------------------------------------------
plot_templates = {
'force / machine displacement (incl. w_elast)':
'_plot_force_machine_displacement',
'force / machine displacement (without w_elast)':
'_plot_force_machine_displacement_wo_elast',
'force / machine displacement (without w_elast, interpolated)':
'_plot_force_machine_displacement_wo_elast_interpolated',
'force / machine displacement (analytical offset)':
'_plot_force_machine_displacement_wo_elast_analytical_offset',
'force / gauge displacement': '_plot_force_gauge_displacement',
'force / gauge displacement (analytical offset)':
'_plot_force_gauge_displacement_with_analytical_offset',
'force / gauge displacement (interpolated)':
'_plot_force_gauge_displacement_interpolated',
# 'smoothed force / gauge displacement' : '_plot_smoothed_force_gauge_displacement',
# 'smoothed force / machine displacement' : '_plot_smoothed_force_machine_displacement_wo_elast',
#
'moment / eps_c (ASC)': '_plot_moment_eps_c_ASC',
'moment / eps_c (raw)': '_plot_moment_eps_c_raw',
#
# 'smoothed moment / eps_c (ASC)' : '_plot_smoothed_moment_eps_c_ASC',
# 'smoothed moment / eps_c (raw)' : '_plot_smoothed_moment_eps_c_raw',
#
# 'analytical bending stiffness' : '_plot_analytical_bending_stiffness'
}
default_plot_template = 'force / deflection (displacement gauge)'
def _plot_analytical_bending_stiffness(self,
axes,
color='red',
linewidth=1.,
linestyle='--'):
'''plot the analytical bending stiffness of the beam (3 point bending)
'''
t = self.thickness
w = self.width
L = self.length
# composite E-modulus
#
E_c = self.E_c
# moment of inertia
#
I_yy = t**3 * w / 12.
delta_11 = L**3 / 48 / E_c / I_yy
K_linear = 1 / delta_11 # [MN/m] bending stiffness with respect to a force applied at center of the beam
w_linear = 2 * np.array([0., 1.])
F_linear = 2 * np.array([0., K_linear])
axes.plot(w_linear, F_linear, linestyle='--')
def _plot_force_machine_displacement_wo_elast(self,
axes,
color='blue',
linewidth=1.,
linestyle='-'):
# get the index of the maximum stress
#
max_force_idx = argmax(self.F_raw)
# get only the ascending branch of the response curve
#
f_asc = self.F_raw[:max_force_idx + 1]
w_asc = self.w_wo_elast[:max_force_idx + 1]
axes.plot(w_asc,
f_asc,
color=color,
linewidth=linewidth,
linestyle=linestyle)
# plot analytical bending stiffness
#
w_linear = 2 * np.array([0., 1.])
F_linear = 2 * np.array([0., self.K_bending_elast])
axes.plot(w_linear, F_linear, linestyle='--')
# xkey = 'deflection [mm]'
# ykey = 'force [kN]'
# axes.set_xlabel('%s' % (xkey,))
# axes.set_ylabel('%s' % (ykey,))
def _plot_force_machine_displacement_wo_elast_interpolated(
self, axes, color='green', linewidth=1., linestyle='-'):
# get the index of the maximum stress
#
max_force_idx = argmax(self.F_raw)
# get only the ascending branch of the response curve
#
f_asc = self.F_raw[:max_force_idx + 1]
w_asc = np.copy(self.w_wo_elast[:max_force_idx + 1])
# interpolate the starting point of the center deflection curve based on the slope of the curve
# (remove offset in measured displacement where there is still no force measured)
#
idx_10 = np.where(f_asc > f_asc[-1] * 0.10)[0][0]
idx_8 = np.where(f_asc > f_asc[-1] * 0.08)[0][0]
f8 = f_asc[idx_8]
f10 = f_asc[idx_10]
w8 = w_asc[idx_8]
w10 = w_asc[idx_10]
m = (f10 - f8) / (w10 - w8)
delta_w = f8 / m
w0 = w8 - delta_w * 0.9
# print 'w0', w0
f_asc_interpolated = np.hstack([0., f_asc[idx_8:]])
w_asc_interpolated = np.hstack([w0, w_asc[idx_8:]])
# print 'type( w_asc_interpolated )', type(w_asc_interpolated)
w_asc_interpolated -= float(w0)
axes.plot(w_asc_interpolated,
f_asc_interpolated,
color=color,
linewidth=linewidth,
linestyle=linestyle)
# fw_arr = np.hstack([f_asc_interpolated[:, None], w_asc_interpolated[:, None]])
# print 'fw_arr.shape', fw_arr.shape
# np.savetxt('BT-3PT-12c-6cm-TU_f-w_interpolated.csv', fw_arr, delimiter=';')
# plot analytical bending stiffness
#
w_linear = 2 * np.array([0., 1.])
F_linear = 2 * np.array([0., self.K_bending_elast])
axes.plot(w_linear, F_linear, linestyle='--')
def _plot_force_machine_displacement_wo_elast_analytical_offset(
self, axes, color='green', linewidth=1., linestyle='-'):
# get the index of the maximum stress
#
max_force_idx = argmax(self.F_raw)
# get only the ascending branch of the response curve
#
f_asc = self.F_raw[:max_force_idx + 1]
w_asc = np.copy(self.w_wo_elast[:max_force_idx + 1])
M_asc = f_asc * self.length / 4.
eps_c_asc = self.eps_c_raw[:max_force_idx + 1]
t = self.thickness
w = self.width
# coposite E-modulus
#
E_c = self.E_c
# resistant moment
#
W_yy = t**2 * w / 6.
K_I_analytic = W_yy * E_c # [MN/m] bending stiffness with respect to center moment
K_I_analytic *= 1000. # [kN/m] bending stiffness with respect to center moment
# interpolate the starting point of the center deflection curve based on the slope of the curve
# (remove offset in measured displacement where there is still no force measured)
#
idx_lin = np.where(M_asc <= K_I_analytic * eps_c_asc)[0][0]
idx_lin = int(idx_lin * 0.7)
# idx_lin = 50
# idx_lin = np.where(M_asc - M_asc[0] / eps_c_asc <= 0.90 * K_I_analytic)[0][0]
print 'idx_lin', idx_lin
print 'F_asc[idx_lin]', f_asc[idx_lin]
print 'M_asc[idx_lin]', M_asc[idx_lin]
print 'w_asc[idx_lin]', w_asc[idx_lin]
w_lin_epsc = w_asc[idx_lin]
w_lin_analytic = f_asc[idx_lin] / self.K_bending_elast
f_asc_offset_analytic = f_asc[idx_lin:]
w_asc_offset_analytic = w_asc[idx_lin:]
w_asc_offset_analytic -= np.array([w_lin_epsc])
w_asc_offset_analytic += np.array([w_lin_analytic])
axes.plot(w_asc_offset_analytic,
f_asc_offset_analytic,
color=color,
linewidth=linewidth,
linestyle=linestyle)
# plot analytical bending stiffness
#
w_linear = 2 * np.array([0., 1.])
F_linear = 2 * np.array([0., self.K_bending_elast])
axes.plot(w_linear, F_linear, linestyle='--')
def _plot_force_machine_displacement(self,
axes,
color='black',
linewidth=1.,
linestyle='-'):
xdata = self.w_raw
ydata = self.F_raw
axes.plot(xdata,
ydata,
color=color,
linewidth=linewidth,
linestyle=linestyle)
# xkey = 'deflection [mm]'
# ykey = 'force [kN]'
# axes.set_xlabel('%s' % (xkey,))
# axes.set_ylabel('%s' % (ykey,))
# plot analytical bending stiffness
#
w_linear = 2 * np.array([0., 1.])
F_linear = 2 * np.array([0., self.K_bending_elast])
axes.plot(w_linear, F_linear, linestyle='--')
def _plot_force_gauge_displacement_with_analytical_offset(
self, axes, color='black', linewidth=1., linestyle='-'):
# skip the first values (= first seconds of testing)
# and start with the analytical bending stiffness instead to avoid artificial offset of F-w-diagram
#
# w_max = np.max(self.w_ASC)
# cut_idx = np.where(self.w_ASC > 0.001 * w_max)[0]
cut_idx = np.where(self.w_ASC > 0.01)[0]
print 'F_cr ', self.F_cr
# cut_idx = np.where(self.F_ASC > 0.6 * self.F_cr)[0]
print 'cut_idx', cut_idx[0]
print 'w_ASC[cut_idx[0]]', self.w_ASC[cut_idx[0]]
xdata = np.copy(self.w_ASC[cut_idx])
ydata = np.copy(self.F_ASC[cut_idx])
# specify offset if force does not start at the origin with value 0.
F_0 = ydata[0]
print 'F_0 ', F_0
offset_w = F_0 / self.K_bending_elast
xdata -= xdata[0]
xdata += offset_w
f_asc_interpolated = np.hstack([0, ydata])
w_asc_interpolated = np.hstack([0, xdata])
# fw_arr = np.hstack([f_asc_interpolated[:, None], w_asc_interpolated[:, None]])
# print 'fw_arr.shape', fw_arr.shape
# np.savetxt('BT-3PT-6c-2cm-TU_f-w_interpolated.csv', fw_arr, delimiter=';')
xdata = self.w_raw
ydata = self.F_raw
axes.plot(xdata,
ydata,
color='blue',
linewidth=linewidth,
linestyle=linestyle)
axes.plot(w_asc_interpolated,
f_asc_interpolated,
color=color,
linewidth=linewidth,
linestyle=linestyle)
# xkey = 'deflection [mm]'
# ykey = 'force [kN]'
# axes.set_xlabel('%s' % (xkey,))
# axes.set_ylabel('%s' % (ykey,))
# plot analytical bending stiffness
#
w_linear = 2 * np.array([0., 1.])
F_linear = 2 * np.array([0., self.K_bending_elast])
axes.plot(w_linear, F_linear, linestyle='--')
def _plot_force_gauge_displacement(self,
axes,
offset_w=0.,
color='black',
linewidth=1.,
linestyle='-'):
xdata = self.w_ASC
ydata = self.F_ASC
# specify offset if force does not start at the origin
xdata += offset_w
axes.plot(xdata,
ydata,
color=color,
linewidth=linewidth,
linestyle=linestyle)
# xkey = 'deflection [mm]'
# ykey = 'force [kN]'
# axes.set_xlabel('%s' % (xkey,))
# axes.set_ylabel('%s' % (ykey,))
# fw_arr = np.hstack([xdata[:, None], ydata[:, None]])
# print 'fw_arr.shape', fw_arr.shape
# np.savetxt('BT-3PT-6c-2cm-TU-80cm-V3_f-w_asc.csv', fw_arr, delimiter=';')
# plot analytical bending stiffness
#
w_linear = 2 * np.array([0., 1.])
F_linear = 2 * np.array([0., self.K_bending_elast])
axes.plot(w_linear, F_linear, linestyle='--')
def _plot_smoothed_force_gauge_displacement(self, axes):
# get the index of the maximum stress
#
max_force_idx = argmax(self.F_ASC)
# get only the ascending branch of the response curve
#
F_asc = self.F_ASC[:max_force_idx + 1]
w_asc = self.w_ASC[:max_force_idx + 1]
n_points = int(self.n_fit_window_fraction * len(w_asc))
F_smooth = smooth(F_asc, n_points, 'flat')
w_smooth = smooth(w_asc, n_points, 'flat')
axes.plot(w_smooth, F_smooth, color='blue', linewidth=2)
def _plot_force_gauge_displacement_interpolated(self,
axes,
color='green',
linewidth=1.,
linestyle='-'):
'''get only the ascending branch of the meassured load-displacement curve)'''
# get the index of the maximum stress
#
max_force_idx = argmax(self.F_ASC)
# get only the ascending branch of the response curve
#
f_asc = self.F_ASC[:max_force_idx + 1]
w_asc = self.w_ASC[:max_force_idx + 1]
# interpolate the starting point of the center deflection curve based on the slope of the curve
# (remove offset in measured displacement where there is still no force measured)
#
idx_10 = np.where(f_asc > f_asc[-1] * 0.10)[0][0]
idx_8 = np.where(f_asc > f_asc[-1] * 0.08)[0][0]
f8 = f_asc[idx_8]
f10 = f_asc[idx_10]
w8 = w_asc[idx_8]
w10 = w_asc[idx_10]
m = (f10 - f8) / (w10 - w8)
delta_w = f8 / m
w0 = w8 - delta_w * 0.9
print 'w0', w0
f_asc_interpolated = np.hstack([0., f_asc[idx_8:]])
w_asc_interpolated = np.hstack([w0, w_asc[idx_8:]])
print 'type( w_asc_interpolated )', type(w_asc_interpolated)
w_asc_interpolated -= float(w0)
# w_offset = f_asc[idx_10] / self.K_bending_elast
# f_asc_interpolated = np.hstack([0., f_asc[ idx_10: ]])
# w_asc_interpolated = np.hstack([0, w_asc[ idx_10: ] - w_asc[idx_10] + w_offset])
axes.plot(w_asc_interpolated,
f_asc_interpolated,
color=color,
linewidth=linewidth,
linestyle=linestyle)
# plot analytical bending stiffness
#
w_linear = 2 * np.array([0., 1.])
F_linear = 2 * np.array([0., self.K_bending_elast])
axes.plot(w_linear, F_linear, linestyle='--')
def _plot_smoothed_force_machine_displacement_wo_elast(self, axes):
# get the index of the maximum stress
#
max_force_idx = argmax(self.F_raw)
# get only the ascending branch of the response curve
#
F_asc = self.F_raw[:max_force_idx + 1]
w_asc = self.w_wo_elast[:max_force_idx + 1]
n_points = int(self.n_fit_window_fraction * len(w_asc))
F_smooth = smooth(F_asc, n_points, 'flat')
w_smooth = smooth(w_asc, n_points, 'flat')
axes.plot(w_smooth, F_smooth, color='blue', linewidth=2)
# plot analytical bending stiffness
#
w_linear = 2 * np.array([0., 1.])
F_linear = 2 * np.array([0., self.K_bending_elast])
axes.plot(w_linear, F_linear, linestyle='--')
# secant_stiffness_w10 = ( f_smooth[10] - f_smooth[0] ) / ( w_smooth[10] - w_smooth[0] )
# w0_lin = array( [0.0, w_smooth[10] ], dtype = 'float_' )
# f0_lin = array( [0.0, w_smooth[10] * secant_stiffness_w10 ], dtype = 'float_' )
# axes.plot( w0_lin, f0_lin, color = 'black' )
def _plot_moment_eps_c_ASC(self, axes):
xkey = 'compressive strain [1*E-3]'
ykey = 'moment [kNm]'
xdata = self.eps_c_ASC
ydata = self.M_ASC
axes.set_xlabel('%s' % (xkey, ))
axes.set_ylabel('%s' % (ykey, ))
axes.plot(xdata, ydata)
# plot stiffness in uncracked state
t = self.thickness
w = self.width
# composite E-modulus
#
E_c = self.E_c
# resistant moment
#
W_yy = t**2 * w / 6.
max_M = np.max(self.M_raw)
K_linear = W_yy * E_c # [MN/m] bending stiffness with respect to center moment
K_linear *= 1000. # [kN/m] bending stiffness with respect to center moment
w_linear = np.array([0., max_M / K_linear])
M_linear = np.array([0., max_M])
axes.plot(w_linear, M_linear, linestyle='--')
def _plot_moment_eps_c_raw(self,
axes,
color='black',
linewidth=1.5,
linestyle='-'):
xkey = 'compressive strain [1*E-3]'
ykey = 'moment [kNm]'
xdata = self.eps_c_raw
ydata = self.M_raw
axes.set_xlabel('%s' % (xkey, ))
axes.set_ylabel('%s' % (ykey, ))
axes.plot(xdata,
ydata,
color=color,
linewidth=linewidth,
linestyle=linestyle)
# plot stiffness in uncracked state
t = self.thickness
w = self.width
# composite E-modulus
#
E_c = self.E_c
# resistant moment
#
W_yy = t**2 * w / 6.
max_M = np.max(self.M_raw)
K_linear = W_yy * E_c # [MN/m] bending stiffness with respect to center moment
K_linear *= 1000. # [kN/m] bending stiffness with respect to center moment
w_linear = np.array([0., max_M / K_linear])
M_linear = np.array([0., max_M])
axes.plot(w_linear, M_linear, linestyle='--')
n_fit_window_fraction = Float(0.1)
smoothed_M_eps_c_ASC = Property(depends_on='input_change')
@cached_property
def _get_smoothed_M_eps_c_ASC(self):
# get the index of the maximum stress
max_idx = argmax(self.M_ASC)
# get only the ascending branch of the response curve
m_asc = self.M_ASC[:max_idx + 1]
eps_c_asc = self.eps_c_ASC[:max_idx + 1]
n_points = int(self.n_fit_window_fraction * len(eps_c_asc))
m_smoothed = smooth(m_asc, n_points, 'flat')
eps_c_smoothed = smooth(eps_c_asc, n_points, 'flat')
return m_smoothed, eps_c_smoothed
smoothed_eps_c_ASC = Property
def _get_smoothed_eps_c_ASC(self):
return self.smoothed_M_eps_c_ASC[1]
smoothed_M_ASC = Property
def _get_smoothed_M_ASC(self):
return self.smoothed_M_eps_c_ASC[0]
def _plot_smoothed_moment_eps_c_ASC(self, axes):
axes.plot(self.smoothed_eps_c_ASC,
self.smoothed_M_ASC,
color='blue',
linewidth=2)
smoothed_M_eps_c_raw = Property(depends_on='input_change')
@cached_property
def _get_smoothed_M_eps_c_raw(self):
# get the index of the maximum stress
max_idx = argmax(self.M_raw)
# get only the ascending branch of the response curve
m_asc = self.M_raw[:max_idx + 1]
eps_c_asc = self.eps_c_raw[:max_idx + 1]
n_points = int(self.n_fit_window_fraction * len(eps_c_asc))
m_smoothed = smooth(m_asc, n_points, 'flat')
eps_c_smoothed = smooth(eps_c_asc, n_points, 'flat')
return m_smoothed, eps_c_smoothed
smoothed_eps_c_raw = Property
def _get_smoothed_eps_c_raw(self):
return self.smoothed_M_eps_c_raw[1]
smoothed_M_raw = Property
def _get_smoothed_M_raw(self):
return self.smoothed_M_eps_c_raw[0]
def _plot_smoothed_moment_eps_c_raw(self, axes):
axes.plot(self.smoothed_eps_c_raw,
self.smoothed_M_raw,
color='blue',
linewidth=2)
#--------------------------------------------------------------------------------
# view
#--------------------------------------------------------------------------------
traits_view = View(VGroup(
Group(Item('length', format_str="%.3f"),
Item('width', format_str="%.3f"),
Item('thickness', format_str="%.3f"),
label='geometry'),
Group(Item('loading_rate'), Item('age'), label='loading rate and age'),
Group(Item('E_c', show_label=True, style='readonly',
format_str="%.0f"),
Item('ccs@', show_label=False),
label='composite cross section')),
scrollable=True,
resizable=True,
height=0.8,
width=0.6)
class SPIRRIDModelView(ModelView):
title = Str('spirrid exec ctrl')
model = Instance(SPIRRID)
ins = Instance(NoOfFibers)
def _ins_default(self):
return NoOfFibers()
eval = Button
def _eval_fired(self):
Specimen_Volume = self.ins.Lx * self.ins.Ly * self.ins.Lz
self.no_of_fibers_in_specimen = (
Specimen_Volume * self.ins.Fiber_volume_fraction / 100) / (
pi *
(self.ins.Fiber_diameter / 20)**2 * self.ins.Fiber_Length / 10)
prob_crackbridging_fiber = (self.ins.Fiber_Length /
(10 * 2)) / self.ins.Lx
self.mean_parallel_links = prob_crackbridging_fiber * self.no_of_fibers_in_specimen
self.stdev_parallel_links = (prob_crackbridging_fiber *
self.no_of_fibers_in_specimen *
(1 - prob_crackbridging_fiber))**0.5
run = Button(desc='Run the computation')
def _run_fired(self):
self.evaluate()
run_legend = Str('mean response',
desc='Legend to be added to the plot of the results')
min_eps = Float(0.0, desc='minimum value of the control variable')
max_eps = Float(1.0, desc='maximum value of the control variable')
n_eps = Int(100, desc='resolution of the control variable')
plot_title = Str('response', desc='diagram title')
label_x = Str('epsilon', desc='label of the horizontal axis')
label_y = Str('sigma', desc='label of the vertical axis')
stdev = Bool(True)
mean_parallel_links = Float(1.,
desc='mean number of parallel links (fibers)')
stdev_parallel_links = Float(
0., desc='stdev of number of parallel links (fibers)')
no_of_fibers_in_specimen = Float(
0.,
desc='Number of Fibers in the specimen',
)
data_changed = Event(True)
def evaluate(self):
self.model.set(
min_eps=0.00,
max_eps=self.max_eps,
n_eps=self.n_eps,
)
# evaluate the mean curve
self.model.mean_curve
# evaluate the variance if the stdev bool is True
if self.stdev:
self.model.var_curve
self.data_changed = True
traits_view = View(VGroup(
HGroup(
Item('run_legend',
resizable=False,
label='Run label',
width=80,
springy=False), Item('run', show_label=False,
resizable=False)),
Tabbed(
VGroup(
Item('model.cached_dG',
label='Cached weight factors',
resizable=False,
springy=False),
Item('model.compiled_QdG_loop',
label='Compiled loop over the integration product',
springy=False),
Item('model.compiled_eps_loop',
enabled_when='model.compiled_QdG_loop',
label='Compiled loop over the control variable',
springy=False),
scrollable=True,
label='Execution configuration',
id='spirrid.tview.exec_params',
dock='tab',
),
VGroup(
HGroup(Item('min_eps',
label='Min',
springy=False,
resizable=False),
Item('max_eps',
label='Max',
springy=False,
resizable=False),
Item('n_eps', label='N', springy=False,
resizable=False),
label='Simulation range',
show_border=True),
HGroup(Item('stdev', label='plot standard deviation'), ),
HSplit(
HGroup(
VGroup(
Item('mean_parallel_links',
label='mean No of fibers'),
Item('stdev_parallel_links',
label='stdev No of fibers'),
)),
VGroup(
Item('@ins',
label='evaluate No of fibers',
show_label=False),
VGroup(
HGroup(
Item('eval',
show_label=False,
resizable=False,
label='Evaluate No of Fibers'),
Item('no_of_fibers_in_specimen',
label='No of Fibers in specimen',
style='readonly')))),
label='number of parralel fibers',
show_border=True,
scrollable=True,
),
VGroup(
Item('plot_title',
label='title',
resizable=False,
springy=False),
Item('label_x', label='x', resizable=False, springy=False),
Item('label_y', label='y', resizable=False, springy=False),
label='title and axes labels',
show_border=True,
scrollable=True,
),
label='Execution control',
id='spirrid.tview.view_params',
dock='tab',
),
scrollable=True,
id='spirrid.tview.tabs',
dock='tab',
),
),
title='SPIRRID',
id='spirrid.viewmodel',
dock='tab',
resizable=True,
height=1.0,
width=1.0)
class MKYarnPDistrib(HasTraits):
implements(IPDistrib)
n_int = Int(50, auto_set=False, enter_set=True, input=True)
p_s = Float(0.0, auto_set=False, enter_set=True, input=True)
p_c = Float(0.0, auto_set=False, enter_set=True, input=True)
k_s = Float(0.0, auto_set=False, enter_set=True, input=True)
k_c = Float(0.0, auto_set=False, enter_set=True, input=True)
x_array = Property(depends_on='+input')
@cached_property
def _get_x_array(self):
a = min(self.p_s, self.p_c)
b = max(self.p_s, self.p_c)
return linspace(a, b, self.n_int)
polynom = Property(depends_on='+input')
@cached_property
def _get_polynom(self):
p_c = self.p_c
p_s = self.p_s
k_s = self.k_s
k_c = self.k_c
a = min(self.p_s, self.p_c)
b = max(self.p_s, self.p_c)
xi = linspace(-0.2, 1.2, 1000)
x = (p_c - p_s) * ((k_s + k_c - 2) * xi**3 +
(3 - 2 * k_s - k_c) * xi**2 + k_s * xi) + p_s
x = sort(x)
xi = sort(xi)
return MFnLineArray(xdata=x, ydata=xi)
cdf_array = Property(depends_on='+input')
@cached_property
def _get_cdf_array(self):
line = self.polynom
X = self.x_array
pyCDF = frompyfunc(line.get_value, 1, 1)
return array(pyCDF(X), dtype='float_')
pdf_array = Property(depends_on='+input')
@cached_property
def _get_pdf_array(self):
line = self.polynom
X = self.x_array
pyf = frompyfunc(line.get_diff, 1, 1)
PDF = array(pyf(X), dtype='float_')
return PDF
dx = Property()
def _get_dx(self):
return abs(self.p_c - self.p_s) / (self.n_int - 1)
def get_pdf_array(self, x_array):
line = self.polynom
X = x_array
pyf = frompyfunc(line.get_diff, 1, 1)
PDF = array(pyf(X), dtype='float_')
return PDF
def integ(self):
return trapz(self.pdf_array, x=self.x_array)
data_mean = Property(Float, depends_on='+input')
@cached_property
def _get_data_mean(self):
X = self.x_array
x = linspace(X[0], X[-1], 300)
PDF = self.get_pdf_array(x)
data_mean = trapz(x * PDF, x=x)
return data_mean
data_stdev = Property(Float, depends_on='+input')
@cached_property
def _get_data_stdev(self):
X = self.x_array
x = linspace(X[0], X[-1], 300)
PDF = self.get_pdf_array(x)
data_stdev = sqrt(trapz(x**2 * PDF, x=x) - self.data_mean**2)
return data_stdev
figure = Instance(Figure)
def _figure_default(self):
figure = Figure(facecolor='white')
return figure
data_changed = Event
@on_trait_change('+input')
def refresh(self):
figure = self.figure
figure.clear()
axes = figure.gca()
# plot PDF and CDF
X = self.x_array
x = linspace(X[0], X[-1], 300)
PDF = self.get_pdf_array(x)
line = self.polynom
pyCDF = frompyfunc(line.get_value, 1, 1)
CDF = pyCDF(x)
axes.plot(x, PDF, lw=1.0, color='blue', \
label='PDF')
axes2 = axes.twinx()
# plot CDF on a separate axis (tick labels left)
axes2.plot(x, CDF, lw=2, color='red', \
label='CDF')
# fill the unity area given by integrating PDF along the X-axis
axes.fill_between(x, 0, PDF, color='lightblue', alpha=0.8, linewidth=2)
# plot mean
mean = self.data_mean
axes.plot([mean, mean], [0.0, self.get_pdf_array(mean)],
lw=1.5,
color='black',
linestyle='-')
# plot stdev
stdev = self.data_stdev
axes.plot([mean - stdev, mean - stdev],
[0.0, self.get_pdf_array(mean - stdev)],
lw=1.5,
color='black',
linestyle='--')
axes.plot([mean + stdev, mean + stdev],
[0.0, self.get_pdf_array(mean + stdev)],
lw=1.5,
color='black',
linestyle='--')
axes.legend(loc='upper center')
axes2.legend(loc='upper right')
axes.ticklabel_format(scilimits=(-3., 4.))
axes2.ticklabel_format(scilimits=(-3., 4.))
# plot limits on X and Y axes
axes.set_ylim(0.0, max(PDF) * 1.15)
axes2.set_ylim(0.0, 1.15)
axes.set_xlim(X[0], X[-1])
axes2.set_xlim(X[0], X[-1])
self.data_changed = True
traits_view = View(HSplit(
VGroup(Item('p_c'), Item('p_s'), Item('k_c'), Item('k_s'),
Item('data_mean', label='mean', style='readonly'),
Item('data_stdev', label='stdev', style='readonly')),
VGroup(Item('figure',
editor=MPLFigureEditor(),
show_label=False,
resizable=True),
id='mk.figure.view'),
),
id='mk.view',
buttons=[OKButton, CancelButton],
resizable=True,
width=600,
height=400)
class ECBReinfTexUniform(ECBReinfComponent):
'''Cross section characteristics needed for tensile specimens
'''
height = DelegatesTo('matrix_cs')
'''height of reinforced cross section
'''
n_layers = Int(12, auto_set=False, enter_set=True, geo_input=True)
'''total number of reinforcement layers [-]
'''
n_rovings = Int(23, auto_set=False, enter_set=True, geo_input=True)
'''number of rovings in 0-direction of one composite layer of the
bending test [-]:
'''
A_roving = Float(0.461, auto_set=False, enter_set=True, geo_input=True)
'''cross section of one roving [mm**2]'''
def convert_eps_tex_u_2_lo(self, eps_tex_u):
'''Convert the strain in the lowest reinforcement layer at failure
to the strain at the bottom of the cross section'''
eps_up = self.state.eps_up
return eps_up + (eps_tex_u - eps_up) / self.z_ti_arr[0] * self.height
def convert_eps_lo_2_tex_u(self, eps_lo):
'''Convert the strain at the bottom of the cross section to the strain
in the lowest reinforcement layer at failure'''
eps_up = self.state.eps_up
return (eps_up + (eps_lo - eps_up) / self.height * self.z_ti_arr[0])
'''Convert the MN to kN
'''
#===========================================================================
# material properties
#===========================================================================
sig_tex_u = Float(1216., auto_set=False, enter_set=True, tt_input=True)
'''Ultimate textile stress measured in the tensile test [MPa]
'''
#===========================================================================
# Distribution of reinforcement
#===========================================================================
s_tex_z = Property(depends_on=ECB_COMPONENT_AND_EPS_CHANGE)
'''spacing between the layers [m]'''
@cached_property
def _get_s_tex_z(self):
return self.height / (self.n_layers + 1)
z_ti_arr = Property(depends_on=ECB_COMPONENT_AND_EPS_CHANGE)
'''property: distance of each reinforcement layer from the top [m]:
'''
@cached_property
def _get_z_ti_arr(self):
return np.array([
self.height - (i + 1) * self.s_tex_z for i in range(self.n_layers)
],
dtype=float)
zz_ti_arr = Property
'''property: distance of reinforcement layers from the bottom
'''
def _get_zz_ti_arr(self):
return self.height - self.z_ti_arr
#===========================================================================
# Discretization conform to the tex layers
#===========================================================================
eps_i_arr = Property(depends_on=ECB_COMPONENT_AND_EPS_CHANGE)
'''Strain at the level of the i-th reinforcement layer
'''
@cached_property
def _get_eps_i_arr(self):
# ------------------------------------------------------------------------
# geometric params independent from the value for 'eps_t'
# ------------------------------------------------------------------------
height = self.height
eps_lo = self.state.eps_lo
eps_up = self.state.eps_up
# strain at the height of each reinforcement layer [-]:
#
return eps_up + (eps_lo - eps_up) * self.z_ti_arr / height
eps_ti_arr = Property(depends_on=ECB_COMPONENT_AND_EPS_CHANGE)
'''Tension strain at the level of the i-th layer of the fabrics
'''
@cached_property
def _get_eps_ti_arr(self):
return (np.fabs(self.eps_i_arr) + self.eps_i_arr) / 2.0
eps_ci_arr = Property(depends_on=ECB_COMPONENT_AND_EPS_CHANGE)
'''Compression strain at the level of the i-th layer.
'''
@cached_property
def _get_eps_ci_arr(self):
return (-np.fabs(self.eps_i_arr) + self.eps_i_arr) / 2.0
#===========================================================================
# Effective crack bridge law
#===========================================================================
ecb_law_type = Trait('fbm',
dict(fbm=ECBLFBM,
cubic=ECBLCubic,
linear=ECBLLinear,
bilinear=ECBLBilinear),
tt_input=True)
'''Selector of the effective crack bridge law type
['fbm', 'cubic', 'linear', 'bilinear']'''
ecb_law = Property(Instance(ECBLBase), depends_on='+tt_input')
'''Effective crack bridge law corresponding to ecb_law_type'''
@cached_property
def _get_ecb_law(self):
return self.ecb_law_type_(sig_tex_u=self.sig_tex_u, cs=self)
show_ecb_law = Button
'''Button launching a separate view of the effective crack bridge law.
'''
def _show_ecb_law_fired(self):
ecb_law_mw = ConstitutiveLawModelView(model=self.ecb_law)
ecb_law_mw.edit_traits(kind='live')
return
tt_modified = Event
sig_ti_arr = Property(depends_on=ECB_COMPONENT_AND_EPS_CHANGE)
'''Stresses at the i-th fabric layer.
'''
@cached_property
def _get_sig_ti_arr(self):
return self.ecb_law.mfn_vct(self.eps_ti_arr)
f_ti_arr = Property(depends_on=ECB_COMPONENT_AND_EPS_CHANGE)
'''force at the height of each reinforcement layer [kN]:
'''
@cached_property
def _get_f_ti_arr(self):
sig_ti_arr = self.sig_ti_arr
n_rovings = self.n_rovings
A_roving = self.A_roving
return sig_ti_arr * n_rovings * A_roving / self.unit_conversion_factor
figure = Instance(Figure)
def _figure_default(self):
figure = Figure(facecolor='white')
figure.add_axes([0.08, 0.13, 0.85, 0.74])
return figure
data_changed = Event
replot = Button
def _replot_fired(self):
self.figure.clear()
ax = self.figure.add_subplot(2, 2, 1)
self.plot_eps(ax)
ax = self.figure.add_subplot(2, 2, 2)
self.plot_sig(ax)
ax = self.figure.add_subplot(2, 2, 3)
self.cc_law.plot(ax)
ax = self.figure.add_subplot(2, 2, 4)
self.ecb_law.plot(ax)
self.data_changed = True
def plot_eps(self, ax):
#ax = self.figure.gca()
d = self.height
# eps ti
ax.plot([-self.eps_lo, -self.eps_up], [0, self.height], color='black')
ax.hlines(self.zz_ti_arr, [0], -self.eps_ti_arr, lw=4, color='red')
# eps cj
ec = np.hstack([self.eps_cj_arr] + [0, 0])
zz = np.hstack([self.zz_cj_arr] + [0, self.height])
ax.fill(-ec, zz, color='blue')
# reinforcement layers
eps_range = np.array([max(0.0, self.eps_lo),
min(0.0, self.eps_up)],
dtype='float')
z_ti_arr = np.ones_like(eps_range)[:, None] * self.z_ti_arr[None, :]
ax.plot(-eps_range, z_ti_arr, 'k--', color='black')
# neutral axis
ax.plot(-eps_range, [d, d], 'k--', color='green', lw=2)
ax.spines['left'].set_position('zero')
ax.spines['right'].set_color('none')
ax.spines['top'].set_color('none')
ax.spines['left'].set_smart_bounds(True)
ax.spines['bottom'].set_smart_bounds(True)
ax.xaxis.set_ticks_position('bottom')
ax.yaxis.set_ticks_position('left')
def plot_sig(self, ax):
d = self.height
# f ti
ax.hlines(self.zz_ti_arr, [0], -self.f_ti_arr, lw=4, color='red')
# f cj
f_c = np.hstack([self.f_cj_arr] + [0, 0])
zz = np.hstack([self.zz_cj_arr] + [0, self.height])
ax.fill(-f_c, zz, color='blue')
f_range = np.array(
[np.max(self.f_ti_arr), np.min(f_c)], dtype='float_')
# neutral axis
ax.plot(-f_range, [d, d], 'k--', color='green', lw=2)
ax.spines['left'].set_position('zero')
ax.spines['right'].set_color('none')
ax.spines['top'].set_color('none')
ax.spines['left'].set_smart_bounds(True)
ax.spines['bottom'].set_smart_bounds(True)
ax.xaxis.set_ticks_position('bottom')
ax.yaxis.set_ticks_position('left')
view = View(HSplit(
Group(
HGroup(
Group(Item('height', springy=True),
Item('width'),
Item('n_layers'),
Item('n_rovings'),
Item('A_roving'),
label='Geometry',
springy=True),
Group(Item('eps_up', label='Upper strain', springy=True),
Item('eps_lo', label='Lower strain'),
label='Strain',
springy=True),
springy=True,
),
HGroup(
Group(VGroup(Item('cc_law_type',
show_label=False,
springy=True),
Item('cc_law',
label='Edit',
show_label=False,
springy=True),
Item('show_cc_law',
label='Show',
show_label=False,
springy=True),
springy=True),
Item('f_ck', label='Compressive strength'),
Item('n_cj', label='Discretization'),
label='Concrete',
springy=True),
Group(VGroup(
Item('ecb_law_type', show_label=False, springy=True),
Item('ecb_law',
label='Edit',
show_label=False,
springy=True),
Item('show_ecb_law',
label='Show',
show_label=False,
springy=True),
springy=True,
),
label='Reinforcement',
springy=True),
springy=True,
),
Group(
Item('s_tex_z', label='vertical spacing', style='readonly'),
label='Layout',
),
Group(HGroup(
Item('M', springy=True, style='readonly'),
Item('N', springy=True, style='readonly'),
),
label='Stress resultants'),
scrollable=True,
),
Group(
Item('replot', show_label=False),
Item('figure',
editor=MPLFigureEditor(),
resizable=True,
show_label=False),
id='simexdb.plot_sheet',
label='plot sheet',
dock='tab',
),
),
width=0.8,
height=0.7,
resizable=True,
buttons=['OK', 'Cancel'])
class SLS(LS):
'''Serviceability limit state
'''
# ------------------------------------------------------------
# SLS: material parameters (Inputs)
# ------------------------------------------------------------
# tensile strength [MPa]
f_ctk = Float(4.0, input=True)
# flexural tensile strength [MPa]
f_m = Float(5.0, input=True)
# ------------------------------------------------------------
# SLS - derived params:
# ------------------------------------------------------------
# area
#
A = Property(Float)
def _get_A(self):
return self.ls_table.D_elem * 1.
# moment of inertia
#
W = Property(Float)
def _get_W(self):
return 1. * self.ls_table.D_elem**2 / 6.
# ------------------------------------------------------------
# SLS: outputs
# ------------------------------------------------------------
ls_columns = List([
'sig_n',
'sig_m',
'eta_n',
'eta_m',
'eta_tot',
])
ls_values = Property(depends_on='+input')
@cached_property
def _get_ls_values(self):
'''get the outputs for SLS
'''
n = self.n
m = self.m
A = self.A
W = self.W
f_ctk = self.f_ctk
f_m = self.f_m
sig_n = n / A / 1000.
sig_m = abs(m / W) / 1000.
eta_n = sig_n / f_ctk
eta_m = sig_m / f_m
eta_tot = eta_n + eta_m
return {
'sig_n': sig_n,
'sig_m': sig_m,
'eta_n': eta_n,
'eta_m': eta_m,
'eta_tot': eta_tot
}
sig_n = Property
def _get_sig_n(self):
return self.ls_values['sig_n']
sig_m = Property
def _get_sig_m(self):
return self.ls_values['sig_m']
eta_n = Property
def _get_eta_n(self):
return self.ls_values['eta_n']
eta_m = Property
def _get_eta_m(self):
return self.ls_values['eta_m']
eta_tot = Property
def _get_eta_tot(self):
return self.ls_values['eta_tot']
assess_name = 'max_eta_tot'
# assess_name = 'max_sig1_up'
#
# max_sig1_up = Property( depends_on = '+input' )
# @cached_property
# def _get_max_sig1_up( self ):
# return ndmax( self.sig1_up )
# @todo: make it possible to select the assess value:
#
# assess_name = Enum( values = 'columns' )
# def _assess_name_default( self ):
# return self.columns[-1]
max_eta_tot = Property(depends_on='+input')
@cached_property
def _get_max_eta_tot(self):
return ndmax(self.eta_tot)
#-------------------------------
# ls view
#-------------------------------
# @todo: the dynamic selection of the columns to be displayed
# does not work in connection with the LSArrayAdapter
traits_view = View(
VGroup(
HGroup(
Item(name='f_ctk',
label='Tensile strength concrete [MPa]: f_ctk '),
Item(name='f_m',
label='Flexural tensile trength concrete [MPa]: f_m ')),
VGroup(
Include('ls_group'),
# @todo: currently LSArrayAdapter must be called both
# in SLS and ULS separately to configure columns
# arrangement individually
#
Item('ls_array',
show_label=False,
editor=TabularEditor(adapter=LSArrayAdapter()))),
),
resizable=True,
scrollable=True,
height=1000,
width=1100)
class YMBMicro(HasTraits):
'''
Yarn-Matrix-Bond Microstructure analysis
'''
data = Instance(IYMBData)
view_3d = Property(Instance(YMBView3D))
@cached_property
def _get_view_3d(self):
return YMBView3D(data=self.data)
cut_view = Property(Instance(YMBView2D))
@cached_property
def _get_cut_view(self):
return YMBView2D(data=self.data)
slider = Property(Instance(YMBSlider), depends_on='data.input_change')
@cached_property
def _get_slider(self):
return YMBSlider(data=self.data)
histogram = Property(Instance(YMBHist), depends_on='data.input_change')
@cached_property
def _get_histogram(self):
return YMBHist(slider=self.slider)
auto_correl_data = Property(Instance(YMBAutoCorrel),
depends_on='data.input_change')
@cached_property
def _get_auto_correl_data(self):
return YMBAutoCorrel(data=self.data)
auto_correl = Property(Instance(YMBAutoCorrelView),
depends_on='data.input_change')
@cached_property
def _get_auto_correl(self):
return YMBAutoCorrelView(correl_data=self.auto_correl_data)
cross_correl = Property(Instance(YMBCrossCorrel),
depends_on='data.input_change')
@cached_property
def _get_cross_correl(self):
return YMBCrossCorrel(data=self.data)
pullout = Instance(YMBPullOut)
def _pullout_default(self):
return YMBPullOut(data=self.data)
ymb_tree = Property(Instance(YMBTree))
@cached_property
def _get_ymb_tree(self):
return YMBTree(ymb_micro=self)
# The main view
view = View(
VGroup(
Group(Item('data@', show_label=False), label='Data source'),
Group(
Item(name='ymb_tree',
id='ymb_tree',
editor=tree_editor,
show_label=False,
resizable=True),
orientation='vertical',
show_labels=True,
show_left=True,
),
dock='tab',
id='qdc.ymb.split',
),
id='qdc.ymb',
dock='horizontal',
drop_class=HasTraits,
# handler = TreeHandler(),
resizable=True,
scrollable=True,
title='Yarn-Matrix-Bond Microstructure Lab',
handler=TitleHandler(),
width=.8,
height=.5)
class PDistrib(HasTraits):
implements = IPDistrib
def __init__(self, **kw):
super(PDistrib, self).__init__(**kw)
self.on_trait_change(self.refresh,
'distr_type.changed,quantile,n_segments')
self.refresh()
# puts all chosen continuous distributions distributions defined
# in the scipy.stats.distributions module as a list of strings
# into the Enum trait
# distr_choice = Enum(distr_enum)
distr_choice = Enum('sin2x', 'weibull_min', 'sin_distr', 'uniform', 'norm',
'piecewise_uniform', 'gamma')
distr_dict = {
'sin2x': sin2x,
'uniform': uniform,
'norm': norm,
'weibull_min': weibull_min,
'sin_distr': sin_distr,
'piecewise_uniform': piecewise_uniform,
'gamma': gamma
}
# instantiating the continuous distributions
distr_type = Property(Instance(Distribution), depends_on='distr_choice')
@cached_property
def _get_distr_type(self):
return Distribution(self.distr_dict[self.distr_choice])
# change monitor - accumulate the changes in a single event trait
changed = Event
@on_trait_change('distr_choice, distr_type.changed, quantile, n_segments')
def _set_changed(self):
self.changed = True
#------------------------------------------------------------------------
# Methods setting the statistical modments
#------------------------------------------------------------------------
mean = Property
def _get_mean(self):
return self.distr_type.mean
def _set_mean(self, value):
self.distr_type.mean = value
variance = Property
def _get_variance(self):
return self.distr_type.mean
def _set_variance(self, value):
self.distr_type.mean = value
#------------------------------------------------------------------------
# Methods preparing visualization
#------------------------------------------------------------------------
quantile = Float(1e-14, auto_set=False, enter_set=True)
range = Property(Tuple(Float), depends_on=\
'distr_type.changed, quantile')
@cached_property
def _get_range(self):
return (self.distr_type.distr.ppf(self.quantile),
self.distr_type.distr.ppf(1 - self.quantile))
n_segments = Int(500, auto_set=False, enter_set=True)
dx = Property(Float, depends_on=\
'distr_type.changed, quantile, n_segments')
@cached_property
def _get_dx(self):
range_length = self.range[1] - self.range[0]
return range_length / self.n_segments
#-------------------------------------------------------------------------
# Discretization of the distribution domain
#-------------------------------------------------------------------------
x_array = Property(Array('float_'), depends_on=\
'distr_type.changed,'\
'quantile, n_segments')
@cached_property
def _get_x_array(self):
'''Get the intrinsic discretization of the distribution
respecting its bounds.
'''
return linspace(self.range[0], self.range[1], self.n_segments + 1)
#===========================================================================
# Access function to the scipy distribution
#===========================================================================
def pdf(self, x):
return self.distr_type.distr.pdf(x)
def cdf(self, x):
return self.distr_type.distr.cdf(x)
def rvs(self, n):
return self.distr_type.distr.rvs(n)
def ppf(self, e):
return self.distr_type.distr.ppf(e)
#===========================================================================
# PDF - permanent array
#===========================================================================
pdf_array = Property(Array('float_'), depends_on=\
'distr_type.changed,'\
'quantile, n_segments')
@cached_property
def _get_pdf_array(self):
'''Get pdf values in intrinsic positions'''
return self.distr_type.distr.pdf(self.x_array)
def get_pdf_array(self, x_array):
'''Get pdf values in externally specified positions'''
return self.distr_type.distr.pdf(x_array)
#===========================================================================
# CDF permanent array
#===========================================================================
cdf_array = Property(Array('float_'), depends_on=\
'distr_type.changed,'\
'quantile, n_segments')
@cached_property
def _get_cdf_array(self):
'''Get cdf values in intrinsic positions'''
return self.distr_type.distr.cdf(self.x_array)
def get_cdf_array(self, x_array):
'''Get cdf values in externally specified positions'''
return self.distr_type.distr.cdf(x_array)
#-------------------------------------------------------------------------
# Randomization
#-------------------------------------------------------------------------
def get_rvs_array(self, n_samples):
return self.distr_type.distr.rvs(n_samples)
figure = Instance(Figure)
def _figure_default(self):
figure = Figure(facecolor='white')
return figure
data_changed = Event
def plot(self, fig):
figure = fig
figure.clear()
axes = figure.gca()
# plot PDF
axes.plot(self.x_array, self.pdf_array, lw=1.0, color='blue', \
label='PDF')
axes2 = axes.twinx()
# plot CDF on a separate axis (tick labels left)
axes2.plot(self.x_array, self.cdf_array, lw=2, color='red', \
label='CDF')
# fill the unity area given by integrating PDF along the X-axis
axes.fill_between(self.x_array,
0,
self.pdf_array,
color='lightblue',
alpha=0.8,
linewidth=2)
# plot mean
mean = self.distr_type.distr.stats('m')
axes.plot([mean, mean], [0.0, self.distr_type.distr.pdf(mean)],
lw=1.5,
color='black',
linestyle='-')
# plot stdev
stdev = sqrt(self.distr_type.distr.stats('v'))
axes.plot([mean - stdev, mean - stdev],
[0.0, self.distr_type.distr.pdf(mean - stdev)],
lw=1.5,
color='black',
linestyle='--')
axes.plot([mean + stdev, mean + stdev],
[0.0, self.distr_type.distr.pdf(mean + stdev)],
lw=1.5,
color='black',
linestyle='--')
axes.legend(loc='center left')
axes2.legend(loc='center right')
axes.ticklabel_format(scilimits=(-3., 4.))
axes2.ticklabel_format(scilimits=(-3., 4.))
# plot limits on X and Y axes
axes.set_ylim(0.0, max(self.pdf_array) * 1.15)
axes2.set_ylim(0.0, 1.15)
range = self.range[1] - self.range[0]
axes.set_xlim(self.x_array[0] - 0.05 * range,
self.x_array[-1] + 0.05 * range)
axes2.set_xlim(self.x_array[0] - 0.05 * range,
self.x_array[-1] + 0.05 * range)
def refresh(self):
self.plot(self.figure)
self.data_changed = True
icon = Property(Instance(ImageResource),
depends_on='distr_type.changed,quantile,n_segments')
@cached_property
def _get_icon(self):
fig = plt.figure(figsize=(4, 4), facecolor='white')
self.plot(fig)
tf_handle, tf_name = tempfile.mkstemp('.png')
fig.savefig(tf_name, dpi=35)
return ImageResource(name=tf_name)
traits_view = View(HSplit(VGroup(
Group(
Item('distr_choice', show_label=False),
Item('@distr_type', show_label=False),
),
id='pdistrib.distr_type.pltctrls',
label='Distribution parameters',
scrollable=True,
),
Tabbed(
Group(
Item('figure',
editor=MPLFigureEditor(),
show_label=False,
resizable=True),
scrollable=True,
label='Plot',
),
Group(Item('quantile', label='quantile'),
Item('n_segments',
label='plot points'),
label='Plot parameters'),
label='Plot',
id='pdistrib.figure.params',
dock='tab',
),
dock='tab',
id='pdistrib.figure.view'),
id='pdistrib.view',
dock='tab',
title='Statistical distribution',
buttons=['Ok', 'Cancel'],
scrollable=True,
resizable=True,
width=600,
height=400)
class LCCTable(HasTraits):
'''Loading Case Manager.
Generates and sorts the loading case combinations
of all specified loading cases.
'''
# define ls
#
ls = Trait('ULS', {'ULS': ULS, 'SLS': SLS})
# lcc-instance for the view
#
lcc = Instance(LCC)
#-------------------------------
# Define loading cases:
#-------------------------------
# path to the directory containing the state data files
#
data_dir = Directory
# list of load cases
#
lc_list_ = List(Instance(LC))
lc_list = Property(List, depends_on='+filter')
def _set_lc_list(self, value):
self.lc_list_ = value
def _get_lc_list(self):
# for lc in self.lc_list_:
# if lc.data_filter != self.data_filter:
# lc.data_filter = self.data_filter
return self.lc_list_
lcc_table_columns = Property(depends_on='lc_list_, +filter')
def _get_lcc_table_columns(self):
return [ ObjectColumn(label='Id', name='lcc_id') ] + \
[ ObjectColumn(label=lc.name, name=lc.name)
for idx, lc in enumerate(self.lc_list) ] + \
[ ObjectColumn(label='assess_value', name='assess_value') ]
geo_columns = Property(List(Str), depends_on='lc_list_, +filter')
def _get_geo_columns(self):
'''derive the order of the geo columns
from the first element in 'lc_list'. The internal
consistency is checked separately in the
'check_consistency' method.
'''
return self.lc_list[0].geo_columns
sr_columns = Property(List(Str), depends_on='lc_list_, +filter')
def _get_sr_columns(self):
'''derive the order of the stress resultants
from the first element in 'lc_list'. The internal
consistency is checked separately in the
'check_consistency' method.
'''
return self.lc_list[0].sr_columns
#-------------------------------
# check consistency
#-------------------------------
def _check_for_consistency(self):
''' check input files for consitency:
'''
return True
#-------------------------------
# lc_arr
#-------------------------------
lc_arr = Property(Array)
def _get_lc_arr(self):
'''stack stress resultants arrays of all loading cases together.
This yields an array of shape ( n_lc, n_elems, n_sr )
'''
sr_arr_list = [lc.sr_arr for lc in self.lc_list]
# for x in sr_arr_list:
# print x.shape
return array(sr_arr_list)
#-------------------------------
# Array dimensions:
#-------------------------------
n_sr = Property(Int)
def _get_n_sr(self):
return len(self.sr_columns)
n_lc = Property(Int)
def _get_n_lc(self):
return len(self.lc_list)
n_lcc = Property(Int)
def _get_n_lcc(self):
return self.combi_arr.shape[0]
n_elems = Property(Int)
def _get_n_elems(self):
return self.lc_list[0].sr_arr.shape[0]
#-------------------------------
# auxilary method for get_combi_arr
#-------------------------------
def _product(self, args):
"""
Get all possible permutations of the security factors
without changing the order of the loading cases.
The method corresponds to the build-in function 'itertools.product'.
Instead of returning a generator object a list of all
possible permutations is returned. As argument a list of list
needs to be defined. In the original version of 'itertools.product'
the function takes a tuple as argument ("*args").
"""
pools = map(tuple,
args) # within original version args defined as *args
result = [[]]
for pool in pools:
result = [x + [y] for x in result for y in pool]
return result
# ------------------------------------------------------------
# 'combi_arr' - array containing indices of all loading case combinations:
# ------------------------------------------------------------
# list of indices of the position of the imposed loads in 'lc_list'
#
# imposed_idx_list = Property( List, depends_on = 'lc_list_, lc_list_.+input' )
imposed_idx_list = Property(List, depends_on='lc_list_')
@cached_property
def _get_imposed_idx_list(self):
'''list of indices for the imposed loads
'''
imposed_idx_list = []
for i_lc, lc in enumerate(self.lc_list):
cat = lc.category
if cat == 'imposed-load':
imposed_idx_list.append(i_lc)
return imposed_idx_list
# array containing the psi with name 'psi_key' for the specified
# loading cases defined in 'lc_list'. For dead-loads no value for
# psi exists. In this case a value of 1.0 is defined.
# This yields an array of shape ( n_lc, )
#
def _get_psi_arr(self, psi_key):
'''psi_key must be defined as:
'psi_0', 'psi_1', or 'psi_2'
Returns an 1d-array of shape ( n_lc, )
'''
# get list of ones (used for dead-loads):
#
psi_list = [1] * len(self.lc_list)
# overwrite ones with psi-values in case of imposed-loads:
#
for imposed_idx in self.imposed_idx_list:
psi_value = getattr(self.lc_list[imposed_idx], psi_key)
psi_list[imposed_idx] = psi_value
return array(psi_list, dtype='float_')
# list containing names of the loading cases
#
lc_name_list = Property(List, depends_on='lc_list_')
@cached_property
def _get_lc_name_list(self):
'''list of names of all loading cases
'''
return [lc.name for lc in self.lc_list]
show_lc_characteristic = Bool(True)
# combination array:
#
combi_arr = Property(Array, depends_on='lc_list_, combination_SLS')
@cached_property
def _get_combi_arr(self):
'''array containing the security and combination factors
corresponding to the specified loading cases.
This yields an array of shape ( n_lcc, n_lc )
Properties defined in the subclasses 'LCCTableULS', 'LCCTableSLS':
- 'gamma_list' = list of security factors (gamma)
- 'psi_lead' = combination factors (psi) of the leading imposed load
- 'psi_non_lead' = combination factors (psi) of the non-leading imposed loads
'''
# printouts:
#
if self.ls == 'ULS':
print '*** load case combinations for limit state ULS ***'
else:
print '*** load case combinations for limit state SLS ***'
print '*** SLS combination used: % s ***' % (self.combination_SLS)
#---------------------------------------------------------------
# get permutations of safety factors ('gamma')
#---------------------------------------------------------------
#
permutation_list = self._product(self.gamma_list)
combi_arr = array(permutation_list)
# check if imposed loads are defined
# if not no further processing of 'combi_arr' is necessary:
#
if self.imposed_idx_list == []:
# if option is set to 'True' the loading case combination table
# is enlarged with an identity matrix in order to see the
# characteristic values of each loading case.
#
if self.show_lc_characteristic:
combi_arr = vstack([identity(self.n_lc), combi_arr])
return combi_arr
#---------------------------------------------------------------
# get leading and non leading combination factors ('psi')
#---------------------------------------------------------------
# go through all possible cases of leading imposed loads
# For the currently investigated imposed loading case the
# psi value is taken from 'psi_leading_arr' for all other
# imposed loads the psi value is taken from 'psi_non_lead_arr'
# Properties are defined in the subclasses
#
psi_lead_arr = self.psi_lead_arr
psi_non_lead_arr = self.psi_non_lead_arr
# for SLS limit state case 'rare' all imposed loads are multiplied
# with 'psi_2'. In this case no distinction between leading or
# non-leading imposed loads needs to be performed.
#
if all(psi_lead_arr == psi_non_lead_arr):
combi_arr_psi = combi_arr * psi_lead_arr
# generate a list or arrays obtained by multiplication
# with the psi-factors.
# This yields a list of length = number of imposed-loads.
#
else:
combi_arr_psi_list = []
for imposed_idx in self.imposed_idx_list:
# copy in order to preserve initial state of the array
# and avoid in place modification
psi_arr = copy(psi_non_lead_arr)
psi_arr[imposed_idx] = psi_lead_arr[imposed_idx]
combi_arr_lead_i = combi_arr[where(
combi_arr[:, imposed_idx] != 0)] * psi_arr
combi_arr_psi_list.append(combi_arr_lead_i)
combi_arr_psi_no_0 = vstack(combi_arr_psi_list)
# missing cases without any dead load have to be added
# get combinations with all!! imposed = 0
#
lcc_all_imposed_zero = where(
(combi_arr[:, self.imposed_idx_list] == 0).all(axis=1))
# add to combinations
#
combi_arr_psi = vstack(
(combi_arr[lcc_all_imposed_zero], combi_arr_psi_no_0))
#---------------------------------------------------------------
# get exclusive loading cases ('exclusive_to')
#---------------------------------------------------------------
# get a list of lists containing the indices of the loading cases
# that are defined exclusive to each other.
# The list still contains duplicates, e.g. [1,2] and [2,1]
#
exclusive_list = []
for i_lc, lc in enumerate(self.lc_list):
# get related load case number
#
for exclusive_name in lc.exclusive_to:
if exclusive_name in self.lc_name_list:
exclusive_idx = self.lc_name_list.index(exclusive_name)
exclusive_list.append([i_lc, exclusive_idx])
# eliminate the duplicates in 'exclusive_list'
#
exclusive_list_unique = []
for exclusive_list_entry in exclusive_list:
if sorted(exclusive_list_entry) not in exclusive_list_unique:
exclusive_list_unique.append(sorted(exclusive_list_entry))
# delete the rows in combination array that contain
# loading case combinations with imposed-loads that have been defined
# as exclusive to each other.
#
combi_arr_psi_exclusive = combi_arr_psi
# print 'combi_arr_psi_exclusive', combi_arr_psi_exclusive
for exclusive_list_entry in exclusive_list_unique:
# check where maximum one value of the exclusive load cases is unequal to one
# LC1 LC2 LC3 (all LCs are defined as exclusive to each other)
#
# e.g. 1.5 0.9 0.8 (example of 'combi_arr_psi')
# 1.5 0.0 0.0
# 0.0 0.0 0.0 (combination with all imposed loads = 0 after multiplication wit psi and gamma)
# ... ... ...
#
# this would yield the following mask_arr (containing ones or zeros):
# e.g. 1.0 1.0 1.0 --> sum = 3 --> true combi --> accepted combination
# 1.0 0.0 0.0 --> sum = 1 --> false combi --> no accepted combination
# e.g. 0.0 0.0 0.0 --> sum = 0 --> true combi --> accepted combination (only body-loads)
# ... ... ...
#
mask_arr = where(
combi_arr_psi_exclusive[:, exclusive_list_entry] != 0, 1.0,
0.0)
# print 'mask_arr', mask_arr
true_combi = where(sum(mask_arr, axis=1) <= 1.0)
# print 'true_combi', true_combi
combi_arr_psi_exclusive = combi_arr_psi_exclusive[true_combi]
#---------------------------------------------------------------
# create array with only unique load case combinations
#---------------------------------------------------------------
# If the psi values of an imposed-load are defined as zero this
# may led to zero entries in 'combi_arr'. This would yield rows
# in 'combi_arr' which are duplicates. Those rows are removed.
# Add first row in 'combi_arr_psi_exclusive' to '_unique' array
# This array must have shape (1, n_lc) in order to use 'axis'-option
#
combi_arr_psi_exclusive_unique = combi_arr_psi_exclusive[0][None, :]
for row in combi_arr_psi_exclusive:
# Check if all factors in one row are equal to the rows in 'unique' array.
# If this is not the case for any row the combination is added to 'unique'.
# Broadcasting is used for the bool evaluation:
#
if (row == combi_arr_psi_exclusive_unique).all(
axis=1.0).any() == False:
combi_arr_psi_exclusive_unique = vstack(
(combi_arr_psi_exclusive_unique, row))
# if option is set to 'True' the loading case combination table
# is enlarged with an identity matrix in order to see the
# characteristic values of each loading case.
#
# if self.show_lc_characteristic:
# combi_arr_psi_exclusive_unique = vstack( [ identity( self.n_lc ), combi_arr_psi_exclusive_unique ] )
return combi_arr_psi_exclusive_unique
#-------------------------------
# lcc_arr
#-------------------------------
lcc_arr = Property(Array, depends_on='lc_list_')
@cached_property
def _get_lcc_arr(self):
'''Array of all loading case combinations following the
loading cases define in 'lc_list' and the combinations
defined in 'combi_arr'.
This yields an array of shape ( n_lcc, n_elems, n_sr )
'''
self._check_for_consistency()
combi_arr = self.combi_arr
# 'combi_arr' is of shape ( n_lcc, n_lc )
# 'lc_arr' is of shape ( n_lc, n_elems, n_sr )
#
lc_arr = self.lc_arr
# Broadcasting is used to generate array containing the multiplied lc's
# yielding an array of shape ( n_lcc, n_lc, n_elems, n_sr )
#
lc_combi_arr = lc_arr[None, :, :, :] * combi_arr[:, :, None, None]
# Then the sum over index 'n_lc' is evaluated yielding
# an array of all loading case combinations.
# This yields an array of shape ( n_lcc, n_elem, n_sr )
#
lcc_arr = sum(lc_combi_arr, axis=1)
return lcc_arr
#-------------------------------
# lcc_lists
#-------------------------------
lcc_list = Property(List, depends_on='lc_list_')
@cached_property
def _get_lcc_list(self):
'''list of loading case combinations (instances of LCC)
'''
combi_arr = self.combi_arr
lcc_arr = self.lcc_arr
sr_columns = self.sr_columns
geo_columns = self.geo_columns
n_lcc = self.n_lcc
# return a dictionary of the stress resultants
# this is used by LSTable to determine the stress
# resultants of the current limit state
#
lcc_list = []
for i_lcc in range(n_lcc):
state_data_dict = {}
for i_sr, name in enumerate(sr_columns):
state_data_dict[name] = lcc_arr[i_lcc, :, i_sr][:, None]
geo_data_dict = self.geo_data_dict
lcc = LCC( # lcc_table = self,
factors=combi_arr[i_lcc, :],
lcc_id=i_lcc,
ls_table=LSTable(geo_data=geo_data_dict,
state_data=state_data_dict,
ls=self.ls))
for idx, lc in enumerate(self.lc_list):
lcc.add_trait(lc.name, Int(combi_arr[i_lcc, idx]))
lcc_list.append(lcc)
return lcc_list
#-------------------------------
# geo_arr
#-------------------------------
geo_data_dict = Property(Dict, depends_on='lc_list_')
@cached_property
def _get_geo_data_dict(self):
'''Array of global coords derived from the first loading case defined in lc_list.
Coords are identical for all LC's.
'''
return self.lc_list[0].geo_data_dict
#-------------------------------
# min/max-values
#-------------------------------
def get_min_max_state_data(self):
''' get the surrounding curve of all 'lcc' values
'''
lcc_arr = self.lcc_arr
min_arr = ndmin(lcc_arr, axis=0)
max_arr = ndmax(lcc_arr, axis=0)
return min_arr, max_arr
#--------------------------------------
# use for case 'max N*' nach ZiE
# Fall 'maximale Normalkraft' nach ZiE
#--------------------------------------
# max_sr_grouped_dict = Property( Dict )
# @cached_property
# def _get_max_sr_grouped_dict( self ):
# ''' get the surrounding curve for each stress resultant
# shape lcc_array ( n_lcc, n_elems, n_sr )
# '''
# sr_columns = self.sr_columns
# lcc_arr = self.lcc_arr
# dict = {}
# for i, sr in enumerate( self.sr_columns ):
# idx_1 = argmax( abs( lcc_arr[:, :, i] ), axis = 0 )
# idx_2 = arange( 0, idx_1.shape[0], 1 )
# dict[sr] = lcc_arr[idx_1, idx_2, :]
# return dict
#--------------------------------------
# use for case 'max eta' nach ZiE
# Fall max Ausnutzungsgrad nach ZiE
#--------------------------------------
max_sr_grouped_dict = Property(Dict)
@cached_property
def _get_max_sr_grouped_dict(self):
'''evaluate eta and prepare plot
'''
sr_columns = self.sr_columns
lcc_arr = self.lcc_arr
# ## N_s6cm_d results from 'V_op_d'*1.5
# assume a distribution of stresses as for a simple
# supported beam with cantilever corresponding
# to the distance of the screws to each other and to the edge
# of the TRC shell (33cm/17cm)
#
N_s6cm_d = lcc_arr[:, :, 2] * (17. + 33. + 1.) / 33.
# ## V_s6cm_d results from 'N_ip_d'/2
# assume an equal distribution (50% each) of the
# normal forces to each screw
#
V_s6cm_d = lcc_arr[:, :, 0] * 0.56
# V_s6cm_d = ( ( lcc_arr[:, :, 0] / 2 ) ** 2 + ( lcc_arr[:, :, 1] * 1.5 ) ** 2 ) ** 0.5
# resistance ac characteristic value obtained from the
# experiment and EN DIN 1990
#
N_ck = 28.3
V_ck = 63.8
gamma_s = 1.5
eta_N = N_s6cm_d / (N_ck / gamma_s)
eta_V = abs(V_s6cm_d / (V_ck / gamma_s))
eta_inter = (eta_N) + (eta_V)
idx_max_hinge = eta_inter.argmax(axis=0)
dict = {}
for i, sr in enumerate(self.sr_columns):
idx_1 = idx_max_hinge
idx_2 = arange(0, idx_1.shape[0], 1)
dict[sr] = lcc_arr[idx_1, idx_2, :]
return dict
def export_hf_max_grouped(self, filename):
"""exports the hinge forces as consistent pairs for the two case
'max_eta' or 'max_N*'
"""
from matplotlib import pyplot
sr_columns = self.sr_columns
dict = self.max_sr_grouped_dict
length_xy_quarter = self.length_xy_quarter
def save_bar_plot(x,
y,
filename='bla',
title='Title',
xlabel='xlabel',
ylabel='ylavel',
width=0.1,
xmin=0,
xmax=1000,
ymin=-1000,
ymax=1000,
figsize=[10, 5]):
fig = pyplot.figure(facecolor="white", figsize=figsize)
ax1 = fig.add_subplot(1, 1, 1)
ax1.bar(x, y, width=width, align='center', color='green')
ax1.set_xlim(xmin, xmax)
ax1.set_ylim(ymin, ymax)
ax1.set_xlabel(xlabel, fontsize=22)
ax1.set_ylabel(ylabel, fontsize=22)
if title == 'N_ip max':
title = 'Fall max $\eta$'
# title = 'Fall max $N^{*}$'
if title == 'V_ip max':
title = 'max $V_{ip}$'
if title == 'V_op max':
title = 'Fall max $V^{*}$'
ax1.set_title(title)
fig.savefig(filename, orientation='portrait', bbox_inches='tight')
pyplot.clf()
X = array(self.geo_data_dict['X_hf'])
Y = array(self.geo_data_dict['Y_hf'])
# symmetric axes
#
idx_sym = where(abs(Y[:, 0] - 2.0 * length_xy_quarter) <= 0.0001)
X_sym = X[idx_sym].reshape(-1)
idx_r0_r1 = where(abs(X[:, 0] - 2.0 * length_xy_quarter) <= 0.0001)
X_r0_r1 = Y[idx_r0_r1].reshape(-1)
for sr in sr_columns:
F_int = dict[sr] # first row N_ip, second V_ip third V_op
F_sym = F_int[idx_sym, :].reshape(-1, len(sr_columns))
F_r0_r1 = F_int[idx_r0_r1, :].reshape(-1, len(sr_columns))
save_bar_plot(X_sym,
F_sym[:, 0].reshape(-1),
xlabel='$X$ [m]',
ylabel='$N^{*}_{Ed}$ [kN]',
filename=filename + 'N_ip' + '_sym_' + sr + '_max',
title=sr + ' max',
xmin=0.0,
xmax=3.5 * length_xy_quarter,
figsize=[10, 5],
ymin=-30,
ymax=+30)
if self.link_type == 'inc_V_ip':
save_bar_plot(X_sym,
F_sym[:, 1].reshape(-1),
xlabel='$X$ [m]',
ylabel='$V_{ip}$ [kN]',
filename=filename + 'V_ip' + '_sym_' + sr +
'_max',
title=sr + ' max',
xmin=0.0,
xmax=3.5 * length_xy_quarter,
figsize=[10, 5],
ymin=-30,
ymax=+30)
save_bar_plot(X_sym,
F_sym[:, 2].reshape(-1),
xlabel='$X$ [m]',
ylabel='$V^{*}_{Ed}$ [kN]',
filename=filename + 'V_op' + '_sym_' + sr + '_max',
title=sr + ' max',
xmin=0.0,
xmax=3.5 * length_xy_quarter,
figsize=[10, 5],
ymin=-10,
ymax=+10)
# r0_r1
#
save_bar_plot(X_r0_r1,
F_r0_r1[:, 0].reshape(-1),
xlabel='$Y$ [m]',
ylabel='$N^{*}_{Ed}$ [kN]',
filename=filename + 'N_ip' + '_r0_r1_' + sr + '_max',
title=sr + ' max',
xmin=0.0,
xmax=2.0 * length_xy_quarter,
figsize=[5, 5],
ymin=-30,
ymax=+30)
if self.link_type == 'inc_V_ip':
save_bar_plot(X_r0_r1,
F_r0_r1[:, 1].reshape(-1),
xlabel='$Y$ [m]',
ylabel='$V_{ip}$ [kN]',
filename=filename + 'V_ip' + '_r0_r1_' + sr +
'_max',
title=sr + ' max',
xmin=0.0,
xmax=2.0 * length_xy_quarter,
figsize=[5, 5],
ymin=-30,
ymax=+30)
save_bar_plot(X_r0_r1,
F_r0_r1[:, 2].reshape(-1),
xlabel='$Y$ [m]',
ylabel='$V^{*}_{Ed}$ [kN]',
filename=filename + 'V_op' + '_r0_r1_' + sr + '_max',
title=sr + ' max',
xmin=0.0,
xmax=2.0 * length_xy_quarter,
figsize=[5, 5],
ymin=-10,
ymax=+10)
def plot_interaction_s6cm(self):
"""get the maximum values (consistent pairs of N and V) and plot them in an interaction plot
"""
lcc_arr = self.lcc_arr
# ## F_Edt results from 'V_op_d'*1.5
# assume a distribution of stresses as for a simple
# supported beam with cantilever corresponding
# to the distance of the screws to each other and to the edge
# of the TRC shell (33cm/17cm)
#
F_Edt = lcc_arr[:, :, 2] * (17. + 33. + 1.) / 33.
# ## F_EdV1 results from 'N_ip_d'/2
# assume an equal distribution (50% each) of the
# normal forces to each screw
#
F_EdV1 = lcc_arr[:, :, 0] * 0.56
# V_s6cm_d = ( ( lcc_arr[:, :, 0] / 2 ) ** 2 + ( lcc_arr[:, :, 1] * 1.5 ) ** 2 ) ** 0.5
# resistance ac characteristic value obtained from the
# experiment and EN DIN 1990
#
F_Rkt = 28.3
F_RkV1 = 63.8
gamma_M = 1.5
eta_t = abs(F_Edt / (F_Rkt / gamma_M))
eta_V1 = abs(F_EdV1 / (F_RkV1 / gamma_M))
print 'eta_t.shape', eta_t.shape
print 'eta_V1.shape', eta_V1.shape
# self.interaction_plot(abs(F_Edt), abs(F_EdV1))
self.interaction_plot(eta_t, eta_V1)
# eta_inter = ( eta_N ) + ( eta_V )
#
# idx_max_hinge = eta_inter.argmax( axis = 0 )
# idx_hinge = arange( 0, len( idx_max_hinge ), 1 )
# plot_eta_N = eta_N[idx_max_hinge, idx_hinge]
# plot_eta_V = eta_V[idx_max_hinge, idx_hinge]
# self.interaction_plot( plot_eta_N, plot_eta_V )
def interaction_plot(self, eta_N, eta_V):
from matplotlib import font_manager
ticks_font = font_manager.FontProperties(family='Times',
style='normal',
size=18,
weight='normal',
stretch='normal')
from matplotlib import pyplot
fig = pyplot.figure(facecolor="white", figsize=[10, 10])
ax1 = fig.add_subplot(1, 1, 1)
# x = arange(0, 1.01, 0.01)
# y15 = (1 - x ** 1.5) ** (1 / 1.5)
# y = (1 - x)
ax1.set_xlabel('$F_\mathrm{Ed,V1}/F_\mathrm{Rd,V1}$', fontsize=24)
ax1.set_ylabel('$F_\mathrm{Ed,t}/F_\mathrm{Rd,t}$', fontsize=24)
# ax1.set_xlabel('$|N_\mathrm{Ed}|$' , fontsize=32)
# ax1.set_ylabel('$|V_\mathrm{Ed}|$', fontsize=32)
# ax1.plot(x , y, '--', color='black'
# , linewidth=2.0)
# ax1.plot(x , y15, '--', color='black'
# , linewidth=2.0)
ax1.plot(eta_V, eta_N, 'wo', markersize=3)
# ax1.plot(eta_V, eta_N, 'o', color='green', markersize=8)
# ax1.plot( eta_V[where( limit < 1 )] , eta_N[where( limit < 1 )], 'o', markersize = 8 )
# ax1.plot( eta_V[where( limit > 1 )] , eta_N[where( limit > 1 )], 'o', color = 'red', markersize = 8 )
for xlabel_i in ax1.get_xticklabels():
xlabel_i.set_fontsize(24)
xlabel_i.set_family('serif')
for ylabel_i in ax1.get_yticklabels():
ylabel_i.set_fontsize(24)
ylabel_i.set_family('serif')
# ax1.plot( x , 1 - x, '--', color = 'black', label = 'lineare Interaktion' )
ax1.set_xlim(0, 1.0)
ax1.set_ylim(0, 1.0)
ax1.legend()
pyplot.show()
pyplot.clf()
# choose linking type (in-plane shear dof blocked or not)
#
link_type = Enum('exc_V_ip', 'inc_V_ip')
# length of the shell (needed to plot the hinge forces plots correctly)
#
length_xy_quarter = 3.5 # m
def export_hf_lc(self):
"""exports the hinge forces for each loading case separately
"""
from matplotlib import pyplot
sr_columns = self.sr_columns
dict = self.max_sr_grouped_dict
length_xy_quarter = self.length_xy_quarter
def save_bar_plot(x,
y,
filename='bla',
xlabel='xlabel',
ylabel='ylavel',
ymin=-10,
ymax=10,
width=0.1,
xmin=0,
xmax=1000,
figsize=[10, 5]):
fig = pyplot.figure(facecolor="white", figsize=figsize)
ax1 = fig.add_subplot(1, 1, 1)
ax1.bar(x, y, width=width, align='center', color='blue')
ax1.set_xlim(xmin, xmax)
ax1.set_ylim(ymin, ymax)
ax1.set_xlabel(xlabel, fontsize=22)
ax1.set_ylabel(ylabel, fontsize=22)
fig.savefig(filename, orientation='portrait', bbox_inches='tight')
pyplot.clf()
X = array(self.geo_data_dict['X_hf'])
Y = array(self.geo_data_dict['Y_hf'])
# symmetric axes
#
idx_sym = where(abs(Y[:, 0] - 2.0 * length_xy_quarter) <= 0.0001)
X_sym = X[idx_sym].reshape(-1)
idx_r0_r1 = where(abs(X[:, 0] - 2.0 * length_xy_quarter) <= 0.0001)
X_r0_r1 = Y[idx_r0_r1].reshape(-1)
F_int = self.lc_arr
for i, lc_name in enumerate(self.lc_name_list):
filename = self.lc_list[i].plt_export
max_N_ip = max(int(ndmax(F_int[i, :, 0], axis=0)) + 1, 1)
max_V_ip = max(int(ndmax(F_int[i, :, 1], axis=0)) + 1, 1)
max_V_op = max(int(ndmax(F_int[i, :, 2], axis=0)) + 1, 1)
F_int_lc = F_int[i, :, :] # first row N_ip, second V_ip third V_op
F_sym = F_int_lc[idx_sym, :].reshape(-1, len(sr_columns))
F_r0_r1 = F_int_lc[idx_r0_r1, :].reshape(-1, len(sr_columns))
save_bar_plot(
X_sym,
F_sym[:, 0].reshape(-1),
# xlabel = '$X$ [m]', ylabel = '$N^{ip}$ [kN]',
xlabel='$X$ [m]',
ylabel='$N^{*}$ [kN]',
filename=filename + 'N_ip' + '_sym',
xmin=0.0,
xmax=3.5 * length_xy_quarter,
ymin=-max_N_ip,
ymax=max_N_ip,
figsize=[10, 5])
save_bar_plot(X_sym,
F_sym[:, 1].reshape(-1),
xlabel='$X$ [m]',
ylabel='$V_{ip}$ [kN]',
filename=filename + 'V_ip' + '_sym',
xmin=0.0,
xmax=3.5 * length_xy_quarter,
ymin=-max_V_ip,
ymax=max_V_ip,
figsize=[10, 5])
save_bar_plot(
X_sym,
F_sym[:, 2].reshape(-1),
# xlabel = '$X$ [m]', ylabel = '$V_{op}$ [kN]',
xlabel='$X$ [m]',
ylabel='$V^{*}$ [kN]',
filename=filename + 'V_op' + '_sym',
xmin=0.0,
xmax=3.5 * length_xy_quarter,
ymin=-max_V_op,
ymax=max_V_op,
figsize=[10, 5])
# r0_r1
#
save_bar_plot(
X_r0_r1,
F_r0_r1[:, 0].reshape(-1),
# xlabel = '$Y$ [m]', ylabel = '$N_{ip}$ [kN]',
xlabel='$Y$ [m]',
ylabel='$N^{*}$ [kN]',
filename=filename + 'N_ip' + '_r0_r1',
xmin=0.0,
xmax=2.0 * length_xy_quarter,
ymin=-max_N_ip,
ymax=max_N_ip,
figsize=[5, 5])
save_bar_plot(X_r0_r1,
F_r0_r1[:, 1].reshape(-1),
xlabel='$Y$ [m]',
ylabel='$V_{ip}$ [kN]',
filename=filename + 'V_ip' + '_r0_r1',
xmin=0.0,
xmax=2.0 * length_xy_quarter,
ymin=-max_V_ip,
ymax=max_V_ip,
figsize=[5, 5])
save_bar_plot(
X_r0_r1,
F_r0_r1[:, 2].reshape(-1),
# xlabel = '$Y$ [m]', ylabel = '$V_{op}$ [kN]',
xlabel='$Y$ [m]',
ylabel='$V^{*}$ [kN]',
filename=filename + 'V_op' + '_r0_r1',
xmin=0.0,
xmax=2.0 * length_xy_quarter,
ymin=-max_V_op,
ymax=max_V_op,
figsize=[5, 5])
# ------------------------------------------------------------
# View
# ------------------------------------------------------------
traits_view = View(VGroup(
VSplit(
Item('lcc_list', editor=lcc_list_editor, show_label=False),
Item('lcc@', show_label=False),
), ),
resizable=True,
scrollable=True,
height=1.0,
width=1.0)
class DoublePulloutSym(RF):
implements(IRF)
title = Str('symetrical yarn pullout')
xi = Float(0.0179,
auto_set=False,
enter_set=True,
input=True,
distr=['weibull_min', 'uniform'])
tau_fr = Float(2.5,
auto_set=False,
enter_set=True,
input=True,
distr=['uniform', 'norm'])
# free length
l = Float(0.0,
auto_set=False,
enter_set=True,
input=True,
distr=['uniform'])
d = Float(26e-3,
auto_set=False,
input=True,
enter_set=True,
distr=['uniform', 'weibull_min'])
E_mod = Float(72.0e3,
auto_set=False,
enter_set=True,
input=True,
distr=['uniform'])
# slack
theta = Float(0.01,
auto_set=False,
enter_set=True,
input=True,
distr=['uniform', 'norm'])
phi = Float(1.,
auto_set=False,
enter_set=True,
input=True,
distr=['uniform', 'norm'])
# embedded length
L = Float(1.,
auto_set=False,
enter_set=True,
input=True,
distr=['uniform'])
free_fiber_end = Bool(True, input=True)
w = Float(enter_set=True, input=True, ctrl_range=(0, 1, 10))
weave_code = '''
'''
def __call__(self, w, tau_fr, l, d, E_mod, theta, xi, phi, L):
'''Return the force for a prescribed crack opening displacement w.
'''
A = pi * d**2 / 4.
l = l * (1 + theta)
w = w - theta * l
Tau = tau_fr * phi * d * pi
P_ = 0.5 * (-l * Tau +
sqrt(l**2 * Tau**2 + 4 * w * H(w) * E_mod * A * Tau))
# one sided pullout P_ = ( -l * Tau + sqrt( l ** 2 * Tau ** 2 + 2 * w * H( w ) * E_mod * A * Tau ) )
if self.free_fiber_end:
# ------ FREE LENGTH -------
# frictional force along the bond length
P_fr = Tau * (L - l)
# if pullout_criterion positive - embedded
# otherwise pulled out
#
pull_out_criterion = P_fr - P_
P_ = P_ * H(pull_out_criterion) + P_fr * H(-pull_out_criterion)
else:
# --------------------------
# ------ clamped fiber end ---------
v = L * (l * Tau + Tau * L) / E_mod / A
P_ = P_ * H(Tau * L - P_) + (Tau * L + (w - v) /
(l + 2 * L) * A * E_mod) * H(P_ -
Tau * L)
# ----------------------------------
P = P_ * H(A * E_mod * xi - P_)
return P
figure = Instance(Figure)
def _figure_default(self):
figure = Figure(facecolor='white')
return figure
changed = Event
@on_trait_change('+input')
def _set_changed(self):
self.changed = True
data_changed = Event
@on_trait_change('+input')
def refresh(self):
figure = self.figure
figure.clear()
axes = figure.gca()
P_fn = lambda w: self.__call__(w, self.tau_fr, self.l, self.d, self.
E_mod, self.theta, self.xi, self.phi,
self.L)
pyF = frompyfunc(P_fn, 1, 1)
w_arr = linspace(0.0, 1.0, 100)
P_arr = array(pyF(w_arr), dtype='float_')
axes.plot(w_arr, P_arr, lw=1.0, color='blue')
self.data_changed = True
group_attribs = VGroup(
Item('tau_fr'),
Item('l'),
Item('d'),
Item('E_mod'),
Item('theta'),
Item('xi'),
Item('phi'),
Item('L'),
Item('free_fiber_end'),
),
traits_view = View(
group_attribs,
scrollable=True,
resizable=True,
id='mk.figure.attribs',
dock='tab',
)
traits_view_diag = View(HSplit(
group_attribs,
VGroup(Item('figure',
editor=MPLFigureEditor(),
show_label=False,
resizable=True),
id='mk.figure.view'),
),
id='mk.view',
buttons=['OK', 'Cancel'],
resizable=True,
width=600,
height=400)
class ImageProcessing(HasTraits):
def __init__(self, **kw):
super(ImageProcessing, self).__init__(**kw)
self.on_trait_change(self.refresh, '+params')
self.refresh()
image_path = Str
def rgb2gray(self, rgb):
return np.dot(rgb[..., :3], [0.299, 0.587, 0.144])
filter = Bool(False, params=True)
block_size = Range(1, 100, params=True)
offset = Range(1, 20, params=True)
denoise = Bool(False, params=True)
denoise_spatial = Range(1, 100, params=True)
processed_image = Property
def _get_processed_image(self):
# read image
image = mpimg.imread(self.image_path)
mask = image[:, :, 1] > 150.
image[mask] = 255.
#plt.imshow(image)
#plt.show()
# convert to grayscale
image = self.rgb2gray(image)
# crop image
image = image[100:1000, 200:1100]
mask = mask[100:1000, 200:1100]
image = image - np.min(image)
image[mask] *= 255. / np.max(image[mask])
if self.filter == True:
image = denoise_bilateral(image,
sigma_spatial=self.denoise_spatial)
if self.denoise == True:
image = threshold_adaptive(image,
self.block_size,
offset=self.offset)
return image, mask
edge_detection_method = Enum('canny', 'sobel', 'roberts', params=True)
canny_sigma = Range(2.832, 5, params=True)
canny_low = Range(5.92, 100, params=True)
canny_high = Range(0.1, 100, params=True)
edges = Property
def _get_edges(self):
img_edg, mask = self.processed_image
if self.edge_detection_method == 'canny':
img_edg = canny(img_edg,
sigma=self.canny_sigma,
low_threshold=self.canny_low,
high_threshold=self.canny_high)
elif self.edge_detection_method == 'roberts':
img_edg = roberts(img_edg)
elif self.edge_detection_method == 'sobel':
img_edg = sobel(img_edg)
img_edg = img_edg > 0.0
return img_edg
radii = Int(80, params=True)
radius_low = Int(40, params=True)
radius_high = Int(120, params=True)
step = Int(2, params=True)
hough_circles = Property
def _get_hough_circles(self):
hough_radii = np.arange(self.radius_low, self.radius_high,
self.step)[::-1]
hough_res = hough_circle(self.edges, hough_radii)
centers = []
accums = []
radii = [] # For each radius, extract num_peaks circles
num_peaks = 3
for radius, h in zip(hough_radii, hough_res):
peaks = peak_local_max(h, num_peaks=num_peaks)
centers.extend(peaks)
print 'circle centers = ', peaks
accums.extend(h[peaks[:, 0], peaks[:, 1]])
radii.extend([radius] * num_peaks)
im = mpimg.imread(self.image_path)
# crop image
im = im[100:1000, 200:1100]
for idx in np.arange(len(centers)):
center_x, center_y = centers[idx]
radius = radii[idx]
cx, cy = circle_perimeter(center_y, center_x, radius)
mask = (cx < im.shape[0]) * (cy < im.shape[1])
im[cy[mask], cx[mask]] = (220., 20., 20.)
return im
eval_edges = Button
def _eval_edges_fired(self):
edges = self.figure_edges
edges.clear()
axes_edges = edges.gca()
axes_edges.imshow(self.edges, plt.gray())
self.data_changed = True
eval_circles = Button
def _eval_circles_fired(self):
circles = self.figure_circles
circles.clear()
axes_circles = circles.gca()
axes_circles.imshow(self.hough_circles, plt.gray())
self.data_changed = True
figure = Instance(Figure)
def _figure_default(self):
figure = Figure(facecolor='white')
return figure
figure_edges = Instance(Figure)
def _figure_edges_default(self):
figure = Figure(facecolor='white')
return figure
figure_circles = Instance(Figure)
def _figure_circles_default(self):
figure = Figure(facecolor='white')
return figure
data_changed = Event
def plot(self, fig, fig2):
figure = fig
figure.clear()
axes = figure.gca()
img, mask = self.processed_image
axes.imshow(img, plt.gray())
def refresh(self):
self.plot(self.figure, self.figure_edges)
self.data_changed = True
traits_view = View(HGroup(
Group(Item('filter', label='filter'),
Item('block_size'),
Item('offset'),
Item('denoise', label='denoise'),
Item('denoise_spatial'),
label='Filters'),
Group(
Item('figure',
editor=MPLFigureEditor(),
show_label=False,
resizable=True),
scrollable=True,
label='Plot',
),
),
Tabbed(
VGroup(Item('edge_detection_method'),
Item('canny_sigma'),
Item('canny_low'),
Item('canny_high'),
Item('eval_edges', label='Evaluate'),
Item('figure_edges',
editor=MPLFigureEditor(),
show_label=False,
resizable=True),
scrollable=True,
label='Plot_edges'), ),
Tabbed(
VGroup(Item('radii'),
Item('radius_low'),
Item('radius_high'),
Item('step'),
Item('eval_circles'),
Item('figure_circles',
editor=MPLFigureEditor(),
show_label=False,
resizable=True),
scrollable=True,
label='Plot_circles'), ),
id='imview',
dock='tab',
title='Image processing',
scrollable=True,
resizable=True,
width=600,
height=400)
class LS(HasTraits):
'''Limit state class
'''
# backward link to the info shell to access the
# input data when calculating
# the limit-state-specific values
#
ls_table = WeakRef
# parameters of the limit state
#
dir = Enum(DIRLIST)
stress_res = Enum(SRLIST)
#-------------------------------
# ls columns
#-------------------------------
# defined in the subclasses
#
ls_columns = List
show_ls_columns = Bool(True)
#-------------------------------
# sr columns
#-------------------------------
# stress resultant columns - for ULS this is defined in the subclasses
#
sr_columns = List(['m', 'n'])
show_sr_columns = Bool(True)
# stress resultant columns - generated from the parameter combination
# dir and stress_res - one of MX, NX, MY, NY
#
m_varname = Property(Str)
def _get_m_varname(self):
# e.g. mx_N
appendix = self.dir + '_' + self.stress_res
return 'm' + appendix
n_varname = Property(Str)
def _get_n_varname(self):
# e.g. nx_N
appendix = self.dir + '_' + self.stress_res
return 'n' + appendix
n = Property(Float)
def _get_n(self):
return getattr(self.ls_table, self.n_varname)
m = Property(Float)
def _get_m(self):
return getattr(self.ls_table, self.m_varname)
#-------------------------------
# geo columns form info shell
#-------------------------------
geo_columns = List(['elem_no', 'X', 'Y', 'Z', 'D_elem'])
show_geo_columns = Bool(True)
elem_no = Property(Float)
def _get_elem_no(self):
return self.ls_table.elem_no
X = Property(Float)
def _get_X(self):
return self.ls_table.X
Y = Property(Float)
def _get_Y(self):
return self.ls_table.Y
Z = Property(Float)
def _get_Z(self):
return self.ls_table.Z
D_elem = Property(Float)
def _get_D_elem(self):
return self.ls_table.D_elem
#-------------------------------
# state columns form info shell
#-------------------------------
# state_columns = List( ['mx', 'my', 'mxy', 'nx', 'ny', 'nxy' ] )
state_columns = List([
'mx',
'my',
'mxy',
'nx',
'ny',
'nxy',
'sigx_lo',
'sigy_lo',
'sigxy_lo',
'sig1_lo',
'sig2_lo',
'alpha_sig_lo',
'sigx_up',
'sigy_up',
'sigxy_up',
'sig1_up',
'sig2_up',
'alpha_sig_up',
])
show_state_columns = Bool(True)
mx = Property(Float)
def _get_mx(self):
return self.ls_table.mx
my = Property(Float)
def _get_my(self):
return self.ls_table.my
mxy = Property(Float)
def _get_mxy(self):
return self.ls_table.mxy
nx = Property(Float)
def _get_nx(self):
return self.ls_table.nx
ny = Property(Float)
def _get_ny(self):
return self.ls_table.ny
nxy = Property(Float)
def _get_nxy(self):
return self.ls_table.nxy
# evaluate principal stresses
# upper face:
#
sigx_up = Property(Float)
def _get_sigx_up(self):
return self.ls_table.sigx_up
sigy_up = Property(Float)
def _get_sigy_up(self):
return self.ls_table.sigy_up
sigxy_up = Property(Float)
def _get_sigxy_up(self):
return self.ls_table.sigxy_up
sig1_up = Property(Float)
def _get_sig1_up(self):
return self.ls_table.sig1_up
sig2_up = Property(Float)
def _get_sig2_up(self):
return self.ls_table.sig2_up
alpha_sig_up = Property(Float)
def _get_alpha_sig_up(self):
return self.ls_table.alpha_sig_up
# lower face:
#
sigx_lo = Property(Float)
def _get_sigx_lo(self):
return self.ls_table.sigx_lo
sigy_lo = Property(Float)
def _get_sigy_lo(self):
return self.ls_table.sigy_lo
sigxy_lo = Property(Float)
def _get_sigxy_lo(self):
return self.ls_table.sigxy_lo
sig1_lo = Property(Float)
def _get_sig1_lo(self):
return self.ls_table.sig1_lo
sig2_lo = Property(Float)
def _get_sig2_lo(self):
return self.ls_table.sig2_lo
alpha_sig_lo = Property(Float)
def _get_alpha_sig_lo(self):
return self.ls_table.alpha_sig_lo
#-------------------------------
# ls table
#-------------------------------
# all columns associated with the limit state including the corresponding
# stress resultants
#
columns = Property(List,
depends_on='show_geo_columns, show_state_columns,\
show_sr_columns, show_ls_columns')
@cached_property
def _get_columns(self):
columns = []
if self.show_geo_columns:
columns += self.geo_columns
if self.show_state_columns:
columns += self.state_columns
if self.show_sr_columns:
columns += self.sr_columns
if self.show_ls_columns:
columns += self.ls_columns
return columns
# select column used for sorting the data in selected sorting order
#
sort_column = Enum(values='columns')
def _sort_column_default(self):
return self.columns[-1]
sort_order = Enum('descending', 'ascending', 'unsorted')
#-------------------------------------------------------
# get the maximum value of the selected variable
# 'max_in_column' of the current sheet (only one sheet)
#-------------------------------------------------------
# get the maximum value of the chosen column
#
max_in_column = Enum(values='columns')
def _max_in_column_default(self):
return self.columns[-1]
max_value = Property(depends_on='max_in_column')
def _get_max_value(self):
col = getattr(self, self.max_in_column)[:, 0]
return max(col)
#-------------------------------------------------------
# get the maximum value and the corresponding case of
# the selected variable 'max_in_column' in all (!) sheets
#-------------------------------------------------------
max_value_all = Property(depends_on='max_in_column')
def _get_max_value_all(self):
return self.ls_table.max_value_and_case[
self.max_in_column]['max_value']
max_case = Property(depends_on='max_in_column')
def _get_max_case(self):
return self.ls_table.max_value_and_case[self.max_in_column]['max_case']
#-------------------------------------------------------
# get ls_table for View
#-------------------------------------------------------
# stack columns together for table used by TabularEditor
#
ls_array = Property(
Array,
depends_on='sort_column, sort_order, show_geo_columns, \
show_state_columns, show_sr_columns, show_ls_columns'
)
@cached_property
def _get_ls_array(self):
arr_list = [getattr(self, col) for col in self.columns]
# get the array currently selected by the sort_column enumeration
#
sort_arr = getattr(self, self.sort_column)[:, 0]
sort_idx = argsort(sort_arr)
ls_array = hstack(arr_list)
if self.sort_order == 'descending':
return ls_array[sort_idx[::-1]]
if self.sort_order == 'ascending':
return ls_array[sort_idx]
if self.sort_order == 'unsorted':
return ls_array
#---------------------------------
# plot outputs in mlab-window
#---------------------------------
plot_column = Enum(values='columns')
plot = Button
def _plot_fired(self):
X = self.ls_table.X[:, 0]
Y = self.ls_table.Y[:, 0]
Z = self.ls_table.Z[:, 0]
plot_col = getattr(self, self.plot_column)[:, 0]
if self.plot_column == 'n_tex':
plot_col = where(plot_col < 0, 0, plot_col)
mlab.figure(figure="SFB532Demo",
bgcolor=(1.0, 1.0, 1.0),
fgcolor=(0.0, 0.0, 0.0))
mlab.points3d(
X,
Y,
(-1.0) * Z,
plot_col,
# colormap = "gist_rainbow",
# colormap = "Reds",
colormap="YlOrBr",
mode="cube",
scale_factor=0.15)
mlab.scalarbar(title=self.plot_column, orientation='vertical')
mlab.show
# name of the trait that is used to assess the evaluated design
#
assess_name = Str('')
#-------------------------------
# ls group
#-------------------------------
# @todo: the dynamic selection of the columns to be displayed
# does not work in connection with the LSArrayAdapter
ls_group = VGroup(
HGroup( #Item( 'assess_name' ),
Item('max_in_column'),
Item('max_value', style='readonly', format_str='%6.2f'),
Item('max_value_all', style='readonly', format_str='%6.2f'),
Item('max_case', style='readonly', label='found in case: '),
),
HGroup(
Item('sort_column'),
Item('sort_order'),
Item('show_geo_columns', label='show geo'),
Item('show_state_columns', label='show state'),
Item('show_sr_columns', label='show sr'),
Item('plot_column'),
Item('plot'),
),
)
class ULS(LS):
'''Ultimate limit state
'''
#--------------------------------------------------------
# ULS: material parameters (Inputs)
#--------------------------------------------------------
# gamma-factor
gamma = Float(1.5, input=True)
# long term reduction factor
beta = Float(1.0, input=True)
# INDEX l: longitudinal direction of the textile (MAG-02-02-06a)
# characteristic tensile strength of the tensile specimen [N/mm2]
f_tk_l = Float(537, input=True)
# design value of the tensile strength of the tensile specimen [N/mm2]
# containing a gamma-factor of 1.5 and d long term reduction factor of 0.7
# f_td_l = 251
f_td_l = Property(Float, depends_on='+input')
def _get_f_td_l(self):
return self.beta * self.f_tk_l / self.gamma
# cross sectional area of the reinforcement [mm2/m]
a_t_l = Float(71.65, input=True)
# INDEX q: orthogonal direction of the textile (MAG-02-02-06a)
# characteristic tensile strength of the tensile specimen [N/mm2]
f_tk_q = Float(511, input=True)
# design value of the tensile strength of the tensile specimen [kN/m]
# f_td_q = 238
f_td_q = Property(Float, depends_on='+input')
def _get_f_td_q(self):
return self.beta * self.f_tk_q / self.gamma
# cross sectional area of the reinforcement [mm2/m]
a_t_q = Float(53.31, input=True)
# tensile strength of the textile reinforcement [kN/m]
f_Rtex_l = Property(Float, depends_on='+input')
def _get_f_Rtex_l(self):
return self.a_t_l * self.f_td_l / 1000.
# tensile strength of the textile reinforcement [kN/m]
f_Rtex_q = Property(Float)
def _get_f_Rtex_q(self, depends_on='+input'):
return self.a_t_q * self.f_td_q / 1000.
# tensile strength of the textile reinforcement [kN/m]
# as simplification the lower value of 0- and 90-direction is taken
#
# sig_composite,exp = 103.4 kN/14cm/6cm = 12.3 MPa
# f_tex,exp = 103.4 kN/14cm/12layers = 61.5 kN/m
# f_tex,k = f_tex,exp * 0,81 (EN-DIN 1990) = 0.82*61.5 kN/m = 50.4 kN/m
# f_tex,d = f_tex,k / 1,5 = 33.6 kN/m
#
f_Rtex_l = f_Rtex_q = 34.3
print 'NOTE: f_Rtex_l = f_Rtex_q = set to %g kN/m !' % (f_Rtex_l)
k_fl = 7.95 / 6.87
print 'NOTE: k_fl = set to %g [-] !' % (k_fl)
# ------------------------------------------------------------
# ULS - derived params:
# ------------------------------------------------------------
# Parameters for the cracked state (GdT):
# assumptions!
# (resultierende statische Nutzhoehe)
#
d = Property(Float)
def _get_d(self):
return 0.75 * self.ls_table.D_elem
# (Abstand Schwereachse zur resultierende Bewehrungslage)
# chose the same amount of reinforcement at the top as at the bottom
# i.e. zs = zs1 = zs2
#
zs = Property(Float)
def _get_zs(self):
return self.d - self.ls_table.D_elem / 2.
# (Innerer Hebelarm)
#
z = Property(Float)
def _get_z(self):
return 0.9 * self.d
# ------------------------------------------------------------
# ULS: outputs
# ------------------------------------------------------------
ls_columns = List([
'e', 'm_Eds', 'f_t', 'f_t_sig', 'beta_l', 'beta_q', 'f_Rtex',
'k_fl_NM', 'n_tex'
])
sr_columns = ['m', 'n', 'alpha', 'd', 'zs', 'z']
alpha_varname = Property()
def _get_alpha_varname(self):
return 'alpha_' + self.stress_res
alpha = Property
def _get_alpha(self):
return getattr(self.ls_table, self.alpha_varname)
ls_values = Property(depends_on='+input')
@cached_property
def _get_ls_values(self):
'''get the outputs for ULS
'''
#-------------------------------------------------
# VAR 1:use simplified reinforced concrete approach
#-------------------------------------------------
n = self.n
m = self.m
alpha = self.alpha
zs = self.zs
z = self.z
f_Rtex_l = self.f_Rtex_l
f_Rtex_q = self.f_Rtex_q
# (Exzentrizitaet)
e = abs(m / n)
e[n == 0] = 1E9 # if normal force is zero set e to very large value
# moment at the height of the resulting reinforcement layer:
m_Eds = abs(m) - zs * n
# tensile force in the reinforcement for bending and compression
f_t = m_Eds / z + n
# check if the two conditions are true:
cond1 = n > 0
cond2 = e < zs
bool_arr = cond1 * cond2
# in case of pure tension in the cross section:
f_t[bool_arr] = n[bool_arr] * (zs[bool_arr] + e[bool_arr]) / (
zs[bool_arr] + zs[bool_arr])
#-------------------------------------------------
# VAR 2:use principal stresses to calculate the resulting tensile force
#-------------------------------------------------
#
princ_stress_eval = True
# princ_stress_eval = False
f_t_sig = self.sig1_lo * self.D_elem * 1000.
if princ_stress_eval == True:
print "NOTE: the principle tensile stresses are used to evaluate 'n_tex'"
# resulting tensile force of the composite cross section[kN]
# the entire (!) cross section is used!
# as the maximum value of the tensile stresses at the top or the bottom
# i.e. sig1_max = min( 0, max( self.sig1_up, self.sig1_lo ) )
#---------------------------------------------------------
# initialize arrays t be filled by case distinction:
#---------------------------------------------------------
#
f_t_sig = zeros_like(self.sig1_up)
alpha = zeros_like(self.sig1_up)
k_fl_NM = ones_like(self.sig1_up)
# absolute value of the bending stress created by mx or my
sig_b = (abs(self.sig1_lo) + abs(self.sig1_up)) / 2
#---------------------------------------------------------
# conditions for case distinction
#---------------------------------------------------------
cond_t_up = self.sig1_up > 0. # compression stress upper side
cond_t_lo = self.sig1_lo > 0. # compression stress lower side
cond_u_gt_l = abs(self.sig1_up) > abs(
self.sig1_lo
) # absolute value of upper stress greater then lower stress
cond_l_gt_u = abs(self.sig1_lo) > abs(
self.sig1_up
) # absolute value of lower stress greater then lower stress
cond_u_eq_l = abs(self.sig1_up) == abs(
self.sig1_lo
) # absolute values of upper stress equals lower stress
cond_b = self.sig1_up * self.sig1_lo < 0 # bending case
cond_u_gt_0 = self.sig1_up > 0 # value of upper stress greater then 0.
cond_l_gt_0 = self.sig1_lo > 0 # value of lower stress greater then 0.
cond_c_up = self.sig1_up < 0. # compression stress upper side
cond_c_lo = self.sig1_lo < 0. # compression stress lower side
#---------------------------------------------------------
# tension case:
#---------------------------------------------------------
# sig_up > sig_lo
bool_arr = cond_t_up * cond_t_lo * cond_u_gt_l
alpha[bool_arr] = self.alpha_sig_up[bool_arr]
k_fl_NM[bool_arr] = 1.0
f_t_sig[bool_arr] = self.sig1_up[bool_arr] * self.D_elem[
bool_arr] * 1000.
# sig_lo > sig_up
bool_arr = cond_t_up * cond_t_lo * cond_l_gt_u
alpha[bool_arr] = self.alpha_sig_lo[bool_arr]
k_fl_NM[bool_arr] = 1.0
f_t_sig[bool_arr] = self.sig1_lo[bool_arr] * self.D_elem[
bool_arr] * 1000.
# sig_lo = sig_up
bool_arr = cond_t_up * cond_t_lo * cond_u_eq_l
alpha[bool_arr] = (self.alpha_sig_lo[bool_arr] +
self.alpha_sig_up[bool_arr]) / 2.
k_fl_NM[bool_arr] = 1.0
f_t_sig[bool_arr] = self.sig1_lo[bool_arr] * self.D_elem[
bool_arr] * 1000.
#---------------------------------------------------------
# bending case (= different signs)
#---------------------------------------------------------
# bending with tension at the lower side
# AND sig_N > 0 (--> bending and tension; sig1_lo results from bending and tension)
bool_arr = cond_b * cond_l_gt_0 * cond_l_gt_u
alpha[bool_arr] = self.alpha_sig_lo[bool_arr]
k_fl_NM[ bool_arr ] = 1.0 + ( self.k_fl - 1.0 ) * \
( 1.0 - ( sig_b[ bool_arr ] - abs( self.sig1_up[ bool_arr] ) ) / self.sig1_lo[ bool_arr ] )
f_t_sig[bool_arr] = self.sig1_lo[bool_arr] * self.D_elem[
bool_arr] * 1000. / k_fl_NM[bool_arr]
# bending with tension at the lower side
# AND sig_N < 0 (--> bending and compression; sig1_lo results only from bending)
bool_arr = cond_b * cond_l_gt_0 * cond_u_gt_l
alpha[bool_arr] = self.alpha_sig_lo[bool_arr]
k_fl_NM[bool_arr] = self.k_fl
f_t_sig[bool_arr] = self.sig1_lo[bool_arr] * self.D_elem[
bool_arr] * 1000. / k_fl_NM[bool_arr]
# bending with tension at the upper side
# AND sig_N > 0 (--> bending and tension; sig1_up results from bending and tension)
bool_arr = cond_b * cond_u_gt_0 * cond_u_gt_l
alpha[bool_arr] = self.alpha_sig_up[bool_arr]
k_fl_NM[ bool_arr ] = 1.0 + ( self.k_fl - 1.0 ) * \
( 1.0 - ( sig_b[ bool_arr ] - abs( self.sig1_lo[ bool_arr] ) ) / self.sig1_up[ bool_arr ] )
f_t_sig[bool_arr] = self.sig1_up[bool_arr] * self.D_elem[
bool_arr] * 1000. / k_fl_NM[bool_arr]
# bending with tension at the upper side
# AND sig_N < 0 (--> bending and compression; sig1_up results only from bending)
bool_arr = cond_b * cond_u_gt_0 * cond_l_gt_u
alpha[bool_arr] = self.alpha_sig_up[bool_arr]
k_fl_NM[bool_arr] = self.k_fl
f_t_sig[bool_arr] = self.sig1_up[bool_arr] * self.D_elem[
bool_arr] * 1000. / k_fl_NM[bool_arr]
#---------------------------------------------------------
# compression case:
#---------------------------------------------------------
bool_arr = cond_c_up * cond_c_lo
# deflection angle is of minor interest use this simplification
alpha[bool_arr] = (self.alpha_sig_up[bool_arr] +
self.alpha_sig_up[bool_arr]) / 2.
f_t_sig[bool_arr] = 0.
k_fl_NM[bool_arr] = 1.0
#------------------------------------------------------------
# get angel of deflection of the textile reinforcement
#------------------------------------------------------------
# angel of deflection of the textile reinforcement for dimensioning in x-direction
# distinguished between longitudinal (l) and transversal (q) direction
# # ASSUMPTION: worst case angle used
# # as first step use the worst case reduction due to deflection possible (at 55 degrees)
# beta_l = 55. * pi / 180. * ones_like( alpha )
# beta_q = ( 90. - 55. ) * pi / 180. * ones_like( alpha )
# @todo: as second step use the value for an alternating layup (i.e. deflection angle)
# @todo: get the correct formula for the demonstrator arrangement
# i.e. the RFEM coordinate system orientation
# print "NOTE: deflection angle is used to evaluate 'n_tex'"
beta_l = 90 - abs(alpha) # [degree]
beta_q = abs(alpha) # [degree]
# resulting strength of the bi-directional textile considering the
# deflection of the reinforcement in the loading direction:
f_Rtex = f_Rtex_l * cos( beta_l * pi / 180. ) * ( 1 - beta_l / 90. ) + \
f_Rtex_q * cos( beta_q * pi / 180. ) * ( 1 - beta_q / 90. )
# f_Rtex= 11.65 kN/m corresponds to sig_Rtex = 585 MPa
#
# f_Rtex = 11.65 * ones_like( alpha )
# f_Rtex= 10.9 kN/m corresponds to sig_Rtex = 678 MPa
# with 1/3*( 679 + 690 + 667 ) = 678 MPa
#
# f_Rtex = 10.9 * ones_like( alpha )
# f_Rtex = 10.00 kN/m corresponds to sig_Rtex = 610 MPa
#
# f_Rtex = 10.00 * ones_like( alpha )
# print 'NOTE: f_Rtex set to %g kN/m !' % ( f_Rtex[0] )
if princ_stress_eval == False:
# necessary number of reinforcement layers
n_tex = f_t / f_Rtex
return {
'e': e,
'm_Eds': m_Eds,
'f_t': f_t,
'f_t_sig': f_t_sig,
'beta_l': beta_l,
'beta_q': beta_q,
'f_Rtex': f_Rtex,
'n_tex': n_tex
}
elif princ_stress_eval == True:
# NOTE: as the entire (!) cross section is used to calculate 'f_tex_sig'
# the number of layers is evaluated also directly for the entire (!)
# cross section!
#
n_tex = f_t_sig / f_Rtex
return {
'e': e,
'm_Eds': m_Eds,
'f_t': f_t,
'f_t_sig': f_t_sig,
'beta_l': beta_l,
'beta_q': beta_q,
'f_Rtex': f_Rtex,
'n_tex': n_tex,
'k_fl_NM': k_fl_NM
}
e = Property
def _get_e(self):
return self.ls_values['e']
m_Eds = Property
def _get_m_Eds(self):
return self.ls_values['m_Eds']
f_t = Property
def _get_f_t(self):
return self.ls_values['f_t']
f_t_sig = Property
def _get_f_t_sig(self):
return self.ls_values['f_t_sig']
beta_l = Property
def _get_beta_l(self):
return self.ls_values['beta_l']
beta_q = Property
def _get_beta_q(self):
return self.ls_values['beta_q']
f_Rtex = Property
def _get_f_Rtex(self):
return self.ls_values['f_Rtex']
k_fl_NM = Property
def _get_k_fl_NM(self):
return self.ls_values['k_fl_NM']
n_tex = Property
def _get_n_tex(self):
return self.ls_values['n_tex']
assess_name = 'max_n_tex'
max_n_tex = Property(depends_on='+input')
@cached_property
def _get_max_n_tex(self):
return ndmax(self.n_tex)
# assess_name = 'max_sig1_up'
# max_sig1_up = Property( depends_on = '+input' )
# @cached_property
# def _get_max_sig1_up( self ):
# return ndmax( self.sig1_up )
# assess_name = 'max_sig1_lo'
# max_sig1_lo = Property( depends_on = '+input' )
# @cached_property
# def _get_max_sig1_lo( self ):
# return ndmax( self.sig1_lo )
#-------------------------------
# ls view
#-------------------------------
# @todo: the dynamic selection of the columns to be displayed
# does not work in connection with the LSArrayAdapter
traits_view = View(VGroup(
HGroup(
VGroup(Item(name='gamma',
label='safety factor material [-]: gamma '),
Item(name='beta',
label='reduction long term durability [-]: beta '),
label='safety factors'),
VGroup(Item(name='f_tk_l',
label='characteristic strength textil [MPa]: f_tk_l ',
format_str="%.1f"),
Item(name='f_td_l',
label='design strength textil [MPa]: f_td_l ',
style='readonly',
format_str="%.1f"),
Item(name='a_t_l',
label='cross sectional area textil [mm^2]: a_t_l ',
style='readonly',
format_str="%.1f"),
Item(name='f_Rtex_l',
label='design strength textil [kN/m]: f_Rtex_l ',
style='readonly',
format_str="%.0f"),
label='material properties (longitudinal)'),
VGroup(Item(name='f_tk_q',
label='characteristic strength textil [MPa]: f_tk_q ',
format_str="%.1f"),
Item(name='f_td_q',
label='design strength textil [MPa]: f_td_q ',
style='readonly',
format_str="%.1f"),
Item(name='a_t_q',
label='cross sectional area textil [mm^2]: a_t_q ',
style='readonly',
format_str="%.1f"),
Item(name='f_Rtex_q',
label='design strength textil [kN/m]: f_Rtex_q ',
style='readonly',
format_str="%.0f"),
label='material Properties (transversal)'),
),
VGroup(
Include('ls_group'),
Item('ls_array',
show_label=False,
editor=TabularEditor(adapter=LSArrayAdapter()))),
),
resizable=True,
scrollable=True,
height=1000,
width=1100)
class GridReinforcement(HasTraits):
'''
Class delivering reinforcement ratio for a grid reinforcement of a cross section
'''
h = Float(
30,
auto_set=False,
enter_set=True, # [mm]
desc='the height of the cross section',
modified=True)
w = Float(
100,
auto_set=False,
enter_set=True, # [mm]
desc='the width of the cross section',
modified=True)
n_f_h = Float(
9,
auto_set=False,
enter_set=True, # [-]
desc='the number of fibers in the height direction',
modified=True)
n_f_w = Float(
12,
auto_set=False,
enter_set=True, # [-]
desc='the number of fibers in the width direction',
modified=True)
a_f = Float(
0.89,
auto_set=False,
enter_set=True, # [m]
desc='the cross sectional area of a single fiber',
modified=True)
A_tot = Property(Float, depends_on='+modified')
def _get_A_tot(self):
return self.h * self.w
A_f = Property(Float, depends_on='+modified')
def _get_A_f(self):
n_f = self.n_f_h * self.n_f_w
a_f = self.a_f
return a_f * n_f
rho = Property(Float, depends_on='+modified')
@cached_property
def _get_rho(self):
return self.A_f / self.A_tot
traits_view = View(
VGroup(
Group(Item('h', label='height'),
Item('w', label='width'),
label='cross section dimensions',
orientation='vertical'),
Group(Item('a_f', label='area of a single fiber'),
Item('n_f_h', label='# in height direction'),
Item('n_f_w', label='# in width direction'),
label='layout of the fiber grid',
orientation='vertical'),
Item('rho',
label='current reinforcement ratio',
style='readonly',
emphasized=True),
# label = 'Cross section parameters',
id='scm.cs.params',
),
id='scm.cs',
dock='horizontal',
resizable=True,
height=0.8,
width=0.8)
class SimCrackLoc( IBVModel ):
'''Model assembling the components for studying the restrained crack localization.
'''
shape = Int( 1, desc = 'Number of finite elements',
ps_levsls = ( 10, 40, 4 ) )
length = Float( 1, desc = 'Length of the simulated region' )
#-------------------------------------------------------
# Material model for the matrix
#-------------------------------------------------------
mats_m = Instance( MATS1DCrackLoc )
def _mats_m_default( self ):
E_m = 1
mats_m = MATS1DCrackLoc( E = E_m,
R = 0.5,
epsilon_0 = 0.001,
epsilon_f = 0.01 )
return mats_m
mats_f = Instance( MATS1DElastic )
def _mats_f_default( self ):
E_f = 0
mats_f = MATS1DElastic( E = E_f )
return mats_f
mats_b = Instance( MATS1DElastic )
def _mats_b_default( self ):
E_b = 0
mats_b = MATS1DElastic( E = E_b )
return mats_b
mats = Instance( MATS1D5Bond )
def _mats_default( self ):
# Material model construction
mats = MATS1D5Bond( mats_phase1 = self.mats_m,
mats_phase2 = self.mats_f,
mats_ifslip = self.mats_b,
mats_ifopen = MATS1DElastic( E = 0 ) # elastic function of open - inactive
)
return mats
#-------------------------------------------------------
# Finite element type
#-------------------------------------------------------
fets = Instance( FETSEval )
def _fets_default( self ):
#return FETS1D52L8ULRH( mats_eval = self.mats )
return FETS1D52L4ULRH( mats_eval = self.mats )
#return FETS1D2L3U( mats_eval = self.mats )
run = Button
@on_trait_change( 'run' )
def peval( self ):
'''Evaluation procedure.
'''
#mv = MATS1DDamageView( model = mats_eval )
#mv.configure_traits()
self.mats_m.reset_state()
# Discretization
#
length = self.length
domain = FEGrid( coord_min = ( 0., length / 5. ),
coord_max = ( length, 0. ),
shape = ( self.shape, 1 ),
fets_eval = self.fets )
right_dofs = domain[-1, -1, -1, :].dofs[0, :, 0]
print 'concrete_dofs', id( domain ), domain[:, 0, :, 0].dofs
# Response tracers
self.stress_strain = RTraceGraph( name = 'Fi,right over u_right (iteration)' ,
var_y = 'F_int', idx_y = right_dofs[0],
var_x = 'U_k', idx_x = right_dofs[0] )
self.eps_m_field = RTraceDomainListField( name = 'eps_m' , position = 'int_pnts',
var = 'eps1', idx = 0,
warp = True )
self.eps_f_field = RTraceDomainListField( name = 'eps_f' , position = 'int_pnts',
var = 'eps2', idx = 0,
warp = True )
# Response tracers
self.sig_m_field = RTraceDomainListField( name = 'sig_m' , position = 'int_pnts',
var = 'mats_phase1_sig_app', idx = 0 )
self.sig_f_field = RTraceDomainListField( name = 'sig_f' , position = 'int_pnts',
var = 'mats_phase2_sig_app', idx = 0 )
self.omega_m_field = RTraceDomainListField( name = 'omega_m' , position = 'int_pnts',
var = 'mats_phase1_omega', idx = 0,
warp = True )
#
damage_onset_displ = self.mats_m.epsilon_0 * self.length
go_behind = 1.5
finish_displ = go_behind * damage_onset_displ
n_steps = 20
step_size = ( finish_displ - damage_onset_displ ) / n_steps
tmax = 1 + n_steps
def ls( t ):
if t <= 1:
return t
else:
return 1.0 + ( t - 1.0 ) / n_steps * ( go_behind - 1 )
ts = TSCrackLoc(
dof_resultants = True,
on_update = self.plot,
sdomain = domain,
bcond_list = [# define the left clamping
BCSlice( var = 'u', value = 0., dims = [0], slice = domain[ 0, 0, 0, :] ),
# loading at the right edge
BCSlice( var = 'f', value = 1, dims = [0], slice = domain[-1, -1, -1, 0],
time_function = ls ),
# BCSlice(var='u', value = finish_displ, dims = [0], slice = domain[-1,-1,-1, 0],
# time_function = ls ),
# fix horizontal displacement in the top layer
BCSlice( var = 'u', value = 0., dims = [0], slice = domain[:, -1, :, -1] ),
# fix the vertical displacement all over the domain
BCSlice( var = 'u', value = 0., dims = [1], slice = domain[ :, :, :, :] )
],
rtrace_list = [ self.stress_strain,
self.eps_m_field,
self.eps_f_field,
self.sig_m_field,
self.sig_f_field,
self.omega_m_field ]
)
# Add the time-loop control
tloop = TLoop( tstepper = ts, KMAX = 200, debug = True, tolerance = 1e-5,
tline = TLine( min = 0.0, step = 1.0, max = 1.0 ) )
print ts.rte_dict.keys()
U = tloop.eval()
self.plot()
return array( [ U[right_dofs[-1]] ], dtype = 'float_' )
#---------------------------------------------------------------
# PLOT OBJECT
#-------------------------------------------------------------------
figure_ld = Instance( Figure )
def _figure_ld_default( self ):
figure = Figure( facecolor = 'white' )
figure.add_axes( [0.12, 0.13, 0.85, 0.74] )
return figure
#---------------------------------------------------------------
# PLOT OBJECT
#-------------------------------------------------------------------
figure_eps = Instance( Figure )
def _figure_eps_default( self ):
figure = Figure( facecolor = 'white' )
figure.add_axes( [0.12, 0.13, 0.85, 0.74] )
return figure
#---------------------------------------------------------------
# PLOT OBJECT
#-------------------------------------------------------------------
figure_omega = Instance( Figure )
def _figure_omega_default( self ):
figure = Figure( facecolor = 'white' )
figure.add_axes( [0.12, 0.13, 0.85, 0.74] )
return figure
#---------------------------------------------------------------
# PLOT OBJECT
#-------------------------------------------------------------------
figure_sig = Instance( Figure )
def _figure_sig_default( self ):
figure = Figure( facecolor = 'white' )
figure.add_axes( [0.12, 0.13, 0.85, 0.74] )
return figure
def plot( self ):
self.stress_strain.refresh()
t = self.stress_strain.trace
ax = self.figure_ld.axes[0]
ax.clear()
ax.plot( t.xdata, t.ydata, linewidth = 2, color = 'blue' )
ax = self.figure_eps.axes[0]
ax.clear()
ef = self.eps_m_field.subfields[0]
xdata = ef.vtk_X[:, 0]
ydata = ef.field_arr[:, 0]
idata = argsort( xdata )
ax.plot( xdata[idata], ydata[idata], linewidth = 2, color = 'grey' )
ef = self.eps_f_field.subfields[0]
xdata = ef.vtk_X[:, 0]
ydata = ef.field_arr[:, 0]
idata = argsort( xdata )
ax.plot( xdata[idata], ydata[idata], linewidth = 2, color = 'red' )
ax.legend( ['eps_m', 'eps_f'] )
ax = self.figure_sig.axes[0]
ax.clear()
ef = self.sig_m_field.subfields[0]
xdata = ef.vtk_X[:, 0]
ydata = ef.field_arr[:, 0]
idata = argsort( xdata )
ax.plot( xdata[idata], ydata[idata], linewidth = 2, color = 'grey' )
ef = self.sig_f_field.subfields[0]
xdata = ef.vtk_X[:, 0]
ydata = ef.field_arr[:, 0]
idata = argsort( xdata )
ax.plot( xdata[idata], ydata[idata], linewidth = 2, color = 'red' )
ax.legend( ['sig_m', 'sig_f'] )
ax = self.figure_omega.axes[0]
ax.clear()
ef = self.omega_m_field.subfields[0]
xdata = ef.vtk_X[:, 0]
ydata = ef.field_arr[:, 0]
idata = argsort( xdata )
ax.plot( xdata[idata], ydata[idata], linewidth = 2, color = 'brown' )
ax.legend( ['omega_m'] )
self.data_changed = True
def get_sim_outputs( self ):
'''
Specifies the results and their order returned by the model
evaluation.
'''
return [ SimOut( name = 'right end displacement', unit = 'm' ) ]
data_changed = Event
toolbar = ToolBar(
Action( name = "Run",
tooltip = 'Start computation',
image = ImageResource( 'kt-start' ),
action = "start_study" ),
Action( name = "Pause",
tooltip = 'Pause computation',
image = ImageResource( 'kt-pause' ),
action = "pause_study" ),
Action( name = "Stop",
tooltip = 'Stop computation',
image = ImageResource( 'kt-stop' ),
action = "stop_study" ),
image_size = ( 32, 32 ),
show_tool_names = False,
show_divider = True,
name = 'view_toolbar' ),
traits_view = View(
HSplit(
VSplit(
Item( 'run', show_label = False ),
VGroup(
Item( 'shape' ),
Item( 'n_sjteps' ),
Item( 'length' ),
label = 'parameters',
id = 'crackloc.viewmodel.factor.geometry',
dock = 'tab',
scrollable = True,
),
VGroup(
Item( 'mats_m@', show_label = False ),
label = 'Matrix',
dock = 'tab',
id = 'crackloc.viewmodel.factor.matrix',
scrollable = True
),
VGroup(
Item( 'mats_f@', show_label = False ),
label = 'Fiber',
dock = 'tab',
id = 'crackloc.viewmodel.factor.fiber',
scrollable = True
),
VGroup(
Item( 'mats_b@', show_label = False ),
label = 'Bond',
dock = 'tab',
id = 'crackloc.viewmodel.factor.bond',
scrollable = True
),
id = 'crackloc.viewmodel.left',
label = 'studied factors',
layout = 'tabbed',
dock = 'tab',
),
VSplit(
VGroup(
Item( 'figure_ld', editor = MPLFigureEditor(),
resizable = True, show_label = False ),
label = 'stress-strain',
id = 'crackloc.viewmode.figure_ld_window',
dock = 'tab',
),
VGroup(
Item( 'figure_eps', editor = MPLFigureEditor(),
resizable = True, show_label = False ),
label = 'strains profile',
id = 'crackloc.viewmode.figure_eps_window',
dock = 'tab',
),
VGroup(
Item( 'figure_sig', editor = MPLFigureEditor(),
resizable = True, show_label = False ),
label = 'stress profile',
id = 'crackloc.viewmode.figure_sig_window',
dock = 'tab',
),
VGroup(
Item( 'figure_omega', editor = MPLFigureEditor(),
resizable = True, show_label = False ),
label = 'omega profile',
id = 'crackloc.viewmode.figure_omega_window',
dock = 'tab',
),
id = 'crackloc.viewmodel.right',
),
id = 'crackloc.viewmodel.splitter',
),
title = 'SimVisage Component: Crack localization',
id = 'crackloc.viewmodel',
dock = 'tab',
resizable = True,
height = 0.8, width = 0.8,
buttons = [OKButton] )
class PDistribView(ModelView):
def __init__(self, **kw):
super(PDistribView, self).__init__(**kw)
self.on_trait_change(
self.refresh,
'model.distr_type.changed, model.quantile, model.n_segments')
self.refresh()
model = Instance(PDistrib)
figure = Instance(Figure)
def _figure_default(self):
figure = Figure(facecolor='white')
return figure
data_changed = Event
def plot(self, fig):
figure = fig
figure.clear()
axes = figure.gca()
# plot PDF
axes.plot(self.model.x_array,
self.model.pdf_array,
lw=1.0,
color='blue',
label='PDF')
axes2 = axes.twinx()
# plot CDF on a separate axis (tick labels left)
axes2.plot(self.model.x_array,
self.model.cdf_array,
lw=2,
color='red',
label='CDF')
# fill the unity area given by integrating PDF along the X-axis
axes.fill_between(self.model.x_array,
0,
self.model.pdf_array,
color='lightblue',
alpha=0.8,
linewidth=2)
# plot mean
mean = self.model.distr_type.distr.stats('m')
axes.plot([mean, mean],
[0.0, self.model.distr_type.distr.pdf(mean)],
lw=1.5,
color='black',
linestyle='-')
# plot stdev
stdev = sqrt(self.model.distr_type.distr.stats('v'))
axes.plot([mean - stdev, mean - stdev],
[0.0, self.model.distr_type.distr.pdf(mean - stdev)],
lw=1.5,
color='black',
linestyle='--')
axes.plot([mean + stdev, mean + stdev],
[0.0, self.model.distr_type.distr.pdf(mean + stdev)],
lw=1.5,
color='black',
linestyle='--')
axes.legend(loc='center left')
axes2.legend(loc='center right')
axes.ticklabel_format(scilimits=(-3., 4.))
axes2.ticklabel_format(scilimits=(-3., 4.))
# plot limits on X and Y axes
axes.set_ylim(0.0, max(self.model.pdf_array) * 1.15)
axes2.set_ylim(0.0, 1.15)
range = self.model.range[1] - self.model.range[0]
axes.set_xlim(self.model.x_array[0] - 0.05 * range,
self.model.x_array[-1] + 0.05 * range)
axes2.set_xlim(self.model.x_array[0] - 0.05 * range,
self.model.x_array[-1] + 0.05 * range)
def refresh(self):
self.plot(self.figure)
self.data_changed = True
icon = Property(
Instance(ImageResource),
depends_on='model.distr_type.changed, model.quantile, model.n_segments'
)
@cached_property
def _get_icon(self):
import matplotlib.pyplot as plt
fig = plt.figure(figsize=(4, 4), facecolor='white')
self.plot(fig)
tf_handle, tf_name = tempfile.mkstemp('.png')
fig.savefig(tf_name, dpi=35)
return ImageResource(name=tf_name)
traits_view = View(HSplit(VGroup(
Group(
Item('model.distr_choice', show_label=False),
Item('@model.distr_type', show_label=False),
),
id='pdistrib.distr_type.pltctrls',
label='Distribution parameters',
scrollable=True,
),
Tabbed(
Group(
Item('figure',
editor=MPLFigureEditor(),
show_label=False,
resizable=True),
scrollable=True,
label='Plot',
),
Group(Item('model.quantile',
label='quantile'),
Item('model.n_segments',
label='plot points'),
label='Plot parameters'),
label='Plot',
id='pdistrib.figure.params',
dock='tab',
),
dock='tab',
id='pdistrib.figure.view'),
id='pdistrib.view',
dock='tab',
title='Statistical distribution',
buttons=[OKButton, CancelButton],
scrollable=True,
resizable=True,
width=600,
height=400)
class ExpSH(ExType):
'''Experiment: Shell Test
'''
# label = Str('slab test')
implements(IExType)
#--------------------------------------------------------------------
# register a change of the traits with metadata 'input'
#--------------------------------------------------------------------
input_change = Event
@on_trait_change('+input, ccs.input_change, +ironing_param')
def _set_input_change(self):
self.input_change = True
#--------------------------------------------------------------------------------
# specify inputs:
#--------------------------------------------------------------------------------
edge_length = Float(1.25, unit = 'm', input = True, table_field = True,
auto_set = False, enter_set = True)
thickness = Float(0.03, unit = 'm', input = True, table_field = True,
auto_set = False, enter_set = True)
# age of the concrete at the time of testing
age = Int(28, unit = 'd', input = True, table_field = True,
auto_set = False, enter_set = True)
loading_rate = Float(0.50, unit = 'mm/min', input = True, table_field = True,
auto_set = False, enter_set = True)
#--------------------------------------------------------------------------
# composite cross section
#--------------------------------------------------------------------------
ccs = Instance(CompositeCrossSection)
def _ccs_default(self):
'''default settings correspond to
setup '7u_MAG-07-03_PZ-0708-1'
'''
fabric_layout_key = 'MAG-07-03'
# fabric_layout_key = '2D-02-06a'
concrete_mixture_key = 'PZ-0708-1'
# concrete_mixture_key = 'FIL-10-09'
# orientation_fn_key = 'all0'
orientation_fn_key = '90_0'
n_layers = 10
s_tex_z = 0.030 / (n_layers + 1)
ccs = CompositeCrossSection (
fabric_layup_list = [
plain_concrete(s_tex_z * 0.5),
FabricLayUp (
n_layers = n_layers,
orientation_fn_key = orientation_fn_key,
s_tex_z = s_tex_z,
fabric_layout_key = fabric_layout_key
),
plain_concrete(s_tex_z * 0.5)
],
concrete_mixture_key = concrete_mixture_key
)
return ccs
#--------------------------------------------------------------------------
# Get properties of the composite
#--------------------------------------------------------------------------
# E-modulus of the composite at the time of testing
E_c = Property(Float, unit = 'MPa', depends_on = 'input_change', table_field = True)
def _get_E_c(self):
return self.ccs.get_E_c_time(self.age)
# E-modulus of the composite after 28 days
E_c28 = DelegatesTo('ccs', listenable = False)
# reinforcement ration of the composite
rho_c = DelegatesTo('ccs', listenable = False)
#--------------------------------------------------------------------------------
# define processing
#--------------------------------------------------------------------------------
# put this into the ironing procedure processor
#
jump_rtol = Float(1,
auto_set = False, enter_set = True,
ironing_param = True)
data_array_ironed = Property(Array(float),
depends_on = 'data_array, +ironing_param, +axis_selection')
@cached_property
def _get_data_array_ironed(self):
'''remove the jumps in the displacement curves
due to resetting the displacement gauges.
'''
print '*** curve ironing activated ***'
# each column from the data array corresponds to a measured parameter
# e.g. displacement at a given point as function of time u = f(t))
#
data_array_ironed = copy(self.data_array)
for idx in range(self.data_array.shape[1]):
# use ironing method only for columns of the displacement gauges.
#
if self.names_and_units[0][ idx ] != 'Kraft' and \
self.names_and_units[0][ idx ] != 'Bezugskanal' and \
self.names_and_units[0][ idx ] != 'D_1o'and \
self.names_and_units[0][ idx ] != 'D_2o'and \
self.names_and_units[0][ idx ] != 'D_3o'and \
self.names_and_units[0][ idx ] != 'D_4o'and \
self.names_and_units[0][ idx ] != 'D_1u'and \
self.names_and_units[0][ idx ] != 'D_2u'and \
self.names_and_units[0][ idx ] != 'D_3u'and \
self.names_and_units[0][ idx ] != 'D_4u'and \
self.names_and_units[0][ idx ] != 'W30_vo'and \
self.names_and_units[0][ idx ] != 'W30_hi':
# 1d-array corresponding to column in data_array
data_arr = copy(data_array_ironed[:, idx])
# get the difference between each point and its successor
jump_arr = data_arr[1:] - data_arr[0:-1]
# get the range of the measured data
data_arr_range = max(data_arr) - min(data_arr)
# determine the relevant criteria for a jump
# based on the data range and the specified tolerances:
jump_crit = self.jump_rtol * data_arr_range
# get the indexes in 'data_column' after which a
# jump exceeds the defined tolerance criteria
jump_idx = where(fabs(jump_arr) > jump_crit)[0]
print 'number of jumps removed in data_arr_ironed for', self.names_and_units[0][ idx ], ': ', jump_idx.shape[0]
# glue the curve at each jump together
for jidx in jump_idx:
# get the offsets at each jump of the curve
shift = data_arr[jidx + 1] - data_arr[jidx]
# shift all succeeding values by the calculated offset
data_arr[jidx + 1:] -= shift
data_array_ironed[:, idx] = data_arr[:]
return data_array_ironed
@on_trait_change('+ironing_param')
def process_source_data(self):
'''read in the measured data from file and assign
attributes after array processing.
NOTE: if center displacement gauge ('WA_M') is missing the measured
displacement of the cylinder ('Weg') is used instead.
A minor mistake is made depending on how much time passes
before the cylinder has contact with the slab.
'''
print '*** process source data ***'
self._read_data_array()
# curve ironing:
#
self.processed_data_array = self.data_array_ironed
# set attributes:
#
self._set_array_attribs()
#--------------------------------------------------------------------------------
# plot templates
#--------------------------------------------------------------------------------
plot_templates = {'force / time' : '_plot_force_time',
'force / deflections center' : '_plot_force_deflection_center',
'force / smoothed deflections center' : '_plot_smoothed_force_deflection_center',
'force / deflections' : '_plot_force_deflections',
'force / eps_t' : '_plot_force_eps_t',
'force / eps_c' : '_plot_force_eps_c',
'force / w_elastomer' : '_plot_force_w_elastomer',
'time / deflections' : '_plot_time_deflections'
}
default_plot_template = 'force / time'
def _plot_force_w_elastomer(self, axes):
xkey = 'displacement [mm]'
ykey = 'force [kN]'
W_vl = self.W_vl
W_vr = self.W_vr
W_hl = self.W_hl
W_hr = self.W_hr
force = self.Kraft
axes.set_xlabel('%s' % (xkey,))
axes.set_ylabel('%s' % (ykey,))
axes.plot(W_vl, force)
axes.plot(W_vr, force)
axes.plot(W_hl, force)
axes.plot(W_hr, force)
def _plot_force_time(self, axes):
xkey = 'time [s]'
ykey = 'force [kN]'
xdata = self.Bezugskanal
ydata = self.Kraft
axes.set_xlabel('%s' % (xkey,))
axes.set_ylabel('%s' % (ykey,))
axes.plot(xdata, ydata
# color = c, linewidth = w, linestyle = s
)
def _plot_force_deflection_center(self, axes):
xkey = 'deflection [mm]'
ykey = 'force [kN]'
xdata = -self.WD4
ydata = self.Kraft
axes.set_xlabel('%s' % (xkey,))
axes.set_ylabel('%s' % (ykey,))
axes.plot(xdata, ydata
# color = c, linewidth = w, linestyle = s
)
n_fit_window_fraction = Float(0.1)
def _plot_smoothed_force_deflection_center(self, axes):
xkey = 'deflection [mm]'
ykey = 'force [kN]'
# get the index of the maximum stress
max_force_idx = argmax(self.Kraft)
# get only the ascending branch of the response curve
f_asc = self.Kraft[:max_force_idx + 1]
w_asc = -self.WD4[:max_force_idx + 1]
f_max = f_asc[-1]
w_max = w_asc[-1]
n_points = int(self.n_fit_window_fraction * len(w_asc))
f_smooth = smooth(f_asc, n_points, 'flat')
w_smooth = smooth(w_asc, n_points, 'flat')
axes.plot(w_smooth, f_smooth, color = 'blue', linewidth = 2)
secant_stiffness_w10 = (f_smooth[10] - f_smooth[0]) / (w_smooth[10] - w_smooth[0])
w0_lin = array([0.0, w_smooth[10] ], dtype = 'float_')
f0_lin = array([0.0, w_smooth[10] * secant_stiffness_w10 ], dtype = 'float_')
axes.set_xlabel('%s' % (xkey,))
axes.set_ylabel('%s' % (ykey,))
def _plot_force_deflections(self, axes):
xkey = 'displacement [mm]'
ykey = 'force [kN]'
# get the index of the maximum stress
max_force_idx = argmax(self.Kraft)
# get only the ascending branch of the response curve
f_asc = self.Kraft[:max_force_idx + 1]
WD1 = -self.WD1[:max_force_idx + 1]
WD2 = -self.WD2[:max_force_idx + 1]
WD3 = -self.WD3[:max_force_idx + 1]
WD4 = -self.WD4[:max_force_idx + 1]
WD5 = -self.WD5[:max_force_idx + 1]
WD6 = -self.WD6[:max_force_idx + 1]
WD7 = -self.WD7[:max_force_idx + 1]
axes.plot(WD1, f_asc, color = 'blue', linewidth = 1 )
axes.plot(WD2, f_asc, color = 'green', linewidth = 1 )
axes.plot(WD3, f_asc, color = 'red', linewidth = 1 )
axes.plot(WD4, f_asc, color = 'black', linewidth = 3 )
axes.plot(WD5, f_asc, color = 'red', linewidth = 1 )
axes.plot(WD6, f_asc, color = 'green', linewidth = 1 )
axes.plot(WD7, f_asc, color = 'blue', linewidth = 1 )
axes.set_xlabel('%s' % (xkey,))
axes.set_ylabel('%s' % (ykey,))
def _plot_time_deflections(self, axes):
xkey = 'time [s]'
ykey = 'deflections [mm]'
time = self.Bezugskanal
WD1 = -self.WD1
WD2 = -self.WD2
WD3 = -self.WD3
WD4 = -self.WD4
WD5 = -self.WD5
WD6 = -self.WD6
WD7 = -self.WD7
axes.plot(time, WD1, color = 'blue', linewidth = 1 )
axes.plot(time, WD2, color = 'green', linewidth = 1 )
axes.plot(time, WD3, color = 'red', linewidth = 1 )
axes.plot(time, WD4, color = 'black', linewidth = 3 )
axes.plot(time, WD5, color = 'red', linewidth = 1 )
axes.plot(time, WD6, color = 'green', linewidth = 1 )
axes.plot(time, WD7, color = 'blue', linewidth = 1 )
axes.set_xlabel('%s' % (xkey,))
axes.set_ylabel('%s' % (ykey,))
def _plot_force_eps_c(self, axes):
xkey = 'force [kN]'
ykey = 'strain [mm/m]'
# get the index of the maximum stress
max_force_idx = argmax(self.Kraft)
# get only the ascending branch of the response curve
f_asc = self.Kraft[:max_force_idx + 1]
D_1u = -self.D_1u[:max_force_idx + 1]
D_2u = -self.D_2u[:max_force_idx + 1]
D_3u = -self.D_3u[:max_force_idx + 1]
D_4u = -self.D_4u[:max_force_idx + 1]
D_1o = -self.D_1o[:max_force_idx + 1]
D_2o = -self.D_2o[:max_force_idx + 1]
D_3o = -self.D_3o[:max_force_idx + 1]
D_4o = -self.D_4o[:max_force_idx + 1]
axes.plot(f_asc, D_1u, color = 'blue', linewidth = 1 )
axes.plot(f_asc, D_2u, color = 'blue', linewidth = 1 )
axes.plot(f_asc, D_3u, color = 'blue', linewidth = 1 )
axes.plot(f_asc, D_4u, color = 'blue', linewidth = 1 )
axes.plot(f_asc, D_1o, color = 'red', linewidth = 1 )
axes.plot(f_asc, D_2o, color = 'red', linewidth = 1 )
axes.plot(f_asc, D_3o, color = 'red', linewidth = 1 )
axes.plot(f_asc, D_4o, color = 'red', linewidth = 1 )
axes.set_xlabel('%s' % (xkey,))
axes.set_ylabel('%s' % (ykey,))
def _plot_force_eps_t(self, axes):
xkey = 'strain [mm/m]'
ykey = 'force [kN]'
# get the index of the maximum stress
max_force_idx = argmax(self.Kraft)
# get only the ascending branch of the response curve
f_asc = self.Kraft[:max_force_idx + 1]
eps_vo = -self.W30_vo[:max_force_idx + 1] / 300.
eps_hi = -self.W30_hi[:max_force_idx + 1] / 300.
axes.plot(eps_vo, f_asc, color = 'blue', linewidth = 1 )
axes.plot(eps_hi, f_asc, color = 'green', linewidth = 1 )
axes.set_xlabel('%s' % (xkey,))
axes.set_ylabel('%s' % (ykey,))
#--------------------------------------------------------------------------------
# view
#--------------------------------------------------------------------------------
traits_view = View(VGroup(
Group(
Item('jump_rtol', format_str = "%.4f"),
label = 'curve_ironing'
),
Group(
Item('thickness', format_str = "%.3f"),
Item('edge_length', format_str = "%.3f"),
label = 'geometry'
),
Group(
Item('loading_rate'),
Item('age'),
label = 'loading rate and age'
),
Group(
Item('E_c', show_label = True, style = 'readonly', format_str = "%.0f"),
Item('ccs@', show_label = False),
label = 'composite cross section'
)
),
scrollable = True,
resizable = True,
height = 0.8,
width = 0.6
)
class SPIRRIDModelView(ModelView):
'''
Size effect depending on the yarn length
'''
model = Instance(SPIRRID)
def _model_changed(self):
self.model.rf = self.rf
rf_values = List(IRF)
def _rf_values_default(self):
return [ Filament() ]
rf = Enum(values = 'rf_values')
def _rf_default(self):
return self.rf_values[0]
def _rf_changed(self):
# reset the rf in the spirrid model and in the rf_modelview
self.model.rf = self.rf
self.rf_model_view = RFModelView(model = self.rf)
# actually, the view should be reusable but the model switch
# did not work for whatever reason
# the binding of the view generated by edit_traits does not
# react to the change in the 'model' attribute.
#
# Remember - we are implementing a handler here
# that has an associated view.
#
# self.rf.model_view.model = self.rf
rf_model_view = Instance(RFModelView)
def _rf_model_view_default(self):
return RFModelView(model = self.rf)
rv_list = Property(List(RIDVariable), depends_on = 'rf')
@cached_property
def _get_rv_list(self):
return [ RIDVariable(spirrid = self.model, rf = self.rf,
varname = nm, trait_value = st)
for nm, st in zip(self.rf.param_keys, self.rf.param_values) ]
selected_var = Instance(RIDVariable)
def _selected_var_default(self):
return self.rv_list[0]
run = Button(desc = 'Run the computation')
def _run_fired(self):
self._redraw()
sample = Button(desc = 'Show samples')
def _sample_fired(self):
n_samples = 50
self.model.set(
min_eps = 0.00, max_eps = self.max_eps, n_eps = self.n_eps,
)
# get the parameter combinations for plotting
rvs_theta_arr = self.model.get_rvs_theta_arr(n_samples)
eps_arr = self.model.eps_arr
figure = self.figure
axes = figure.gca()
for theta_arr in rvs_theta_arr.T:
q_arr = self.rf(eps_arr, *theta_arr)
axes.plot(eps_arr, q_arr, color = 'grey')
self.data_changed = True
run_legend = Str('',
desc = 'Legend to be added to the plot of the results')
clear = Button
def _clear_fired(self):
axes = self.figure.axes[0]
axes.clear()
self.data_changed = True
min_eps = Float(0.0,
desc = 'minimum value of the control variable')
max_eps = Float(1.0,
desc = 'maximum value of the control variable')
n_eps = Int(100,
desc = 'resolution of the control variable')
label_eps = Str('epsilon',
desc = 'label of the horizontal axis')
label_sig = Str('sigma',
desc = 'label of the vertical axis')
figure = Instance(Figure)
def _figure_default(self):
figure = Figure(facecolor = 'white')
#figure.add_axes( [0.08, 0.13, 0.85, 0.74] )
return figure
data_changed = Event(True)
def _redraw(self):
figure = self.figure
axes = figure.gca()
self.model.set(
min_eps = 0.00, max_eps = self.max_eps, n_eps = self.n_eps,
)
mc = self.model.mean_curve
axes.plot(mc.xdata, mc.ydata,
linewidth = 2, label = self.run_legend)
axes.set_xlabel(self.label_eps)
axes.set_ylabel(self.label_sig)
axes.legend(loc = 'best')
self.data_changed = True
traits_view_tabbed = View(
VGroup(
HGroup(
Item('run_legend', resizable = False, label = 'Run label',
width = 80, springy = False),
Item('run', show_label = False, resizable = False),
Item('sample', show_label = False, resizable = False),
Item('clear', show_label = False,
resizable = False, springy = False)
),
Tabbed(
VGroup(
Item('rf', show_label = False),
Item('rf_model_view@', show_label = False, resizable = True),
label = 'Deterministic model',
id = 'spirrid.tview.model',
),
Group(
Item('rv_list', editor = rv_list_editor, show_label = False),
id = 'spirrid.tview.randomization.rv',
label = 'Model variables',
),
Group(
Item('selected_var@', show_label = False, resizable = True),
id = 'spirrid.tview.randomization.distr',
label = 'Distribution',
),
VGroup(
Item('model.cached_dG' , label = 'Cached weight factors',
resizable = False,
springy = False),
Item('model.compiled_QdG_loop' , label = 'Compiled loop over the integration product',
springy = False),
Item('model.compiled_eps_loop' ,
enabled_when = 'model.compiled_QdG_loop',
label = 'Compiled loop over the control variable',
springy = False),
scrollable = True,
label = 'Execution configuration',
id = 'spirrid.tview.exec_params',
dock = 'tab',
),
VGroup(
HGroup(
Item('min_eps' , label = 'Min',
springy = False, resizable = False),
Item('max_eps' , label = 'Max',
springy = False, resizable = False),
Item('n_eps' , label = 'N',
springy = False, resizable = False),
label = 'Simulation range',
show_border = True
),
VGroup(
Item('label_eps' , label = 'x', resizable = False,
springy = False),
Item('label_sig' , label = 'y', resizable = False,
springy = False),
label = 'Axes labels',
show_border = True,
scrollable = True,
),
label = 'Execution control',
id = 'spirrid.tview.view_params',
dock = 'tab',
),
VGroup(
Item('figure', editor = MPLFigureEditor(),
resizable = True, show_label = False),
label = 'Plot sheet',
id = 'spirrid.tview.figure_window',
dock = 'tab',
scrollable = True,
),
scrollable = True,
id = 'spirrid.tview.tabs',
dock = 'tab',
),
),
title = 'SPIRRID',
id = 'spirrid.viewmodel',
dock = 'tab',
resizable = True,
height = 1.0, width = 1.0
)
class ECBLMNDiagram(HasTraits):
# calibrator supplying the effective material law
calib = Instance(ECBLCalib)
def _calib_default(self):
return ECBLCalib(notify_change=self.set_modified)
def _calib_changed(self):
self.calib.notify_change = self.set_modified
modified = Event
def set_modified(self):
print 'MN:set_modifeid'
self.modified = True
# cross section
cs = DelegatesTo('calib')
calibrated_ecb_law = Property(depends_on='modified')
@cached_property
def _get_calibrated_ecb_law(self):
print 'NEW CALIBRATION'
return self.calib.calibrated_ecb_law
eps_cu = Property()
def _get_eps_cu(self):
return -self.cs.cc_law.eps_c_u
eps_tu = Property()
def _get_eps_tu(self):
return self.calibrated_ecb_law.eps_tex_u
n_eps = Int(5, auto_set=False, enter_set=True)
eps_range = Property(depends_on='n_eps')
@cached_property
def _get_eps_range(self):
eps_c_space = np.linspace(self.eps_cu, 0, self.n_eps)
eps_t_space = np.linspace(0, self.eps_tu, self.n_eps)
eps_ccu = 0.8 * self.eps_cu
#eps_cc = self.eps_cu * np.ones_like(eps_c_space)
eps_cc = np.linspace(eps_ccu, self.eps_cu, self.n_eps)
eps_ct = self.eps_cu * np.ones_like(eps_t_space)
eps_tc = self.eps_tu * np.ones_like(eps_c_space)
eps_tt = self.eps_tu * np.ones_like(eps_t_space)
eps1 = np.vstack([eps_c_space, eps_cc])
eps2 = np.vstack([eps_t_space, eps_ct])
eps3 = np.vstack([eps_tc, eps_c_space])
eps4 = np.vstack([eps_tt, eps_t_space])
return np.hstack([eps1, eps2, eps3, eps4])
n_eps_range = Property(depends_on='n_eps')
@cached_property
def _get_n_eps_range(self):
return self.eps_range.shape[1]
#===========================================================================
# MN Diagram
#===========================================================================
def _get_MN_fn(self, eps_lo, eps_up):
self.cs.set(eps_lo=eps_lo, eps_up=eps_up)
return (self.cs.M, self.cs.N)
MN_vct = Property(depends_on='modified')
def _get_MN_vct(self):
return np.vectorize(self._get_MN_fn)
MN_arr = Property(depends_on='modified')
@cached_property
def _get_MN_arr(self):
return self.MN_vct(self.eps_range[0, :], self.eps_range[1, :])
#===========================================================================
# f_eps Diagram
#===========================================================================
current_eps_idx = Int(0) # , auto_set = False, enter_set = True)
def _current_eps_idx_changed(self):
self._clear_fired()
self._replot_fired()
current_eps = Property(depends_on='current_eps_idx')
@cached_property
def _get_current_eps(self):
return self.eps_range[(0, 1), self.current_eps_idx]
current_MN = Property(depends_on='current_eps_idx')
@cached_property
def _get_current_MN(self):
return self._get_MN_fn(*self.current_eps)
#===========================================================================
# Plotting
#===========================================================================
figure = Instance(Figure)
def _figure_default(self):
figure = Figure(facecolor='white')
figure.add_axes([0.08, 0.13, 0.85, 0.74])
return figure
data_changed = Event
clear = Button
def _clear_fired(self):
self.figure.clear()
self.data_changed = True
replot = Button
def _replot_fired(self):
ax = self.figure.add_subplot(2, 2, 1)
ax.plot(-self.eps_range, [0, 0.06], color='black')
ax.plot(-self.current_eps, [0, 0.06], lw=3, color='red')
ax.spines['left'].set_position('zero')
ax.spines['right'].set_color('none')
ax.spines['top'].set_color('none')
ax.spines['left'].set_smart_bounds(True)
ax.spines['bottom'].set_smart_bounds(True)
ax.xaxis.set_ticks_position('bottom')
ax.yaxis.set_ticks_position('left')
ax = self.figure.add_subplot(2, 2, 2)
ax.plot(self.MN_arr[0], -self.MN_arr[1], lw=2, color='blue')
ax.plot(self.current_MN[0],
-self.current_MN[1],
'g.',
markersize=20.0,
color='red')
ax.spines['left'].set_position('zero')
ax.spines['bottom'].set_position('zero')
ax.spines['right'].set_color('none')
ax.spines['top'].set_color('none')
ax.spines['left'].set_smart_bounds(True)
ax.spines['bottom'].set_smart_bounds(True)
ax.xaxis.set_ticks_position('bottom')
ax.yaxis.set_ticks_position('left')
ax.grid(b=None, which='major')
self.cs.set(eps_lo=self.current_eps[0], eps_up=self.current_eps[1])
ax = self.figure.add_subplot(2, 2, 3)
self.cs.plot_eps(ax)
ax = self.figure.add_subplot(2, 2, 4)
self.cs.plot_sig(ax)
self.data_changed = True
view = View(HSplit(
Group(
HGroup(
Group(Item('n_eps', springy=True),
label='Discretization',
springy=True),
springy=True,
),
HGroup(
Group(VGroup(
Item(
'cs',
label='Cross section',
show_label=False,
springy=True,
editor=InstanceEditor(kind='live'),
),
Item(
'calib',
label='Calibration',
show_label=False,
springy=True,
editor=InstanceEditor(kind='live'),
),
springy=True,
),
label='Cross sectoin',
springy=True),
springy=True,
),
scrollable=True,
),
Group(
HGroup(
Item('replot', show_label=False),
Item('clear', show_label=False),
),
Item(
'current_eps_idx',
editor=RangeEditor(
low=0,
high_name='n_eps_range',
format='(%s)',
mode='slider',
auto_set=False,
enter_set=False,
),
show_label=False,
),
Item('figure',
editor=MPLFigureEditor(),
resizable=True,
show_label=False),
id='simexdb.plot_sheet',
label='plot sheet',
dock='tab',
),
),
width=1.0,
height=0.8,
resizable=True,
buttons=['OK', 'Cancel'])
class SimCrackLoc(IBVModel):
'''Model assembling the components for studying the restrained crack localization.
'''
geo_transform = Instance(FlawCenteredGeoTransform)
def _geo_transform_default(self):
return FlawCenteredGeoTransform()
shape = Int(10,
desc='Number of finite elements',
ps_levsls=(10, 40, 4),
input=True)
length = Float(1000,
desc='Length of the simulated region',
unit='mm',
input=True)
flaw_position = Float(500, input=True, unit='mm')
flaw_radius = Float(100, input=True, unit='mm')
reduction_factor = Float(0.9, input=True)
elastic_fraction = Float(0.9, input=True)
avg_radius = Float(400, input=True, unit='mm')
# tensile strength of concrete
f_m_t = Float(3.0, input=True, unit='MPa')
epsilon_0 = Property(unit='-')
def _get_epsilon_0(self):
return self.f_m_t / self.E_m
epsilon_f = Float(10, input=True, unit='-')
h_m = Float(10, input=True, unit='mm')
b_m = Float(8, input=True, unit='mm')
A_m = Property(unit='m^2')
def _get_A_m(self):
return self.b_m * self.h_m
E_m = Float(30.0e5, input=True, unit='MPa')
E_f = Float(70.0e6, input=True, unit='MPa')
A_f = Float(1.0, input=True, unit='mm^2')
s_crit = Float(0.009, input=True, unit='mm')
P_f = Property(depends_on='+input')
@cached_property
def _get_P_f(self):
return sqrt(4 * self.A_f * pi)
K_b = Property(depends_on='+input')
@cached_property
def _get_K_b(self):
return self.T_max / self.s_crit
tau_max = Float(0.0, input=True, unit='MPa')
T_max = Property(depends_on='+input', unit='N/mm')
@cached_property
def _get_T_max(self):
return self.tau_max * self.P_f
rho = Property(depends_on='+input')
@cached_property
def _get_rho(self):
return self.A_f / (self.A_f + self.A_m)
#-------------------------------------------------------
# Material model for the matrix
#-------------------------------------------------------
mats_m = Property(Instance(MATS1DDamageWithFlaw), depends_on='+input')
@cached_property
def _get_mats_m(self):
mats_m = MATS1DDamageWithFlaw(E=self.E_m * self.A_m,
flaw_position=self.flaw_position,
flaw_radius=self.flaw_radius,
reduction_factor=self.reduction_factor,
epsilon_0=self.epsilon_0,
epsilon_f=self.epsilon_f)
return mats_m
mats_f = Instance(MATS1DElastic)
def _mats_f_default(self):
mats_f = MATS1DElastic(E=self.E_f * self.A_f)
return mats_f
mats_b = Instance(MATS1DEval)
def _mats_b_default(self):
mats_b = MATS1DElastic(E=self.K_b)
mats_b = MATS1DPlastic(E=self.K_b,
sigma_y=self.T_max,
K_bar=0.,
H_bar=0.) # plastic function of slip
return mats_b
mats_fb = Property(Instance(MATS1D5Bond), depends_on='+input')
@cached_property
def _get_mats_fb(self):
# Material model construction
return MATS1D5Bond(
mats_phase1=MATS1DElastic(E=0),
mats_phase2=self.mats_f,
mats_ifslip=self.mats_b,
mats_ifopen=MATS1DElastic(
E=0) # elastic function of open - inactive
)
#-------------------------------------------------------
# Finite element type
#-------------------------------------------------------
fets_m = Property(depends_on='+input')
@cached_property
def _get_fets_m(self):
fets_eval = FETS1D2L(mats_eval=self.mats_m)
#fets_eval = FETS1D2L3U( mats_eval = self.mats_m )
return fets_eval
fets_fb = Property(depends_on='+input')
@cached_property
def _get_fets_fb(self):
return FETS1D52L4ULRH(mats_eval=self.mats_fb)
#return FETS1D52L6ULRH( mats_eval = self.mats_fb )
#return FETS1D52L8ULRH( mats_eval = self.mats_fb )
#--------------------------------------------------------------------------------------
# Mesh integrator
#--------------------------------------------------------------------------------------
fe_domain_structure = Property(depends_on='+input')
@cached_property
def _get_fe_domain_structure(self):
'''Root of the domain hierarchy
'''
elem_length = self.length / float(self.shape)
fe_domain = FEDomain()
fe_m_level = FERefinementGrid(name='matrix domain',
domain=fe_domain,
fets_eval=self.fets_m)
fe_grid_m = FEGrid(name='matrix grid',
coord_max=(self.length, ),
shape=(self.shape, ),
level=fe_m_level,
fets_eval=self.fets_m,
geo_transform=self.geo_transform)
fe_fb_level = FERefinementGrid(name='fiber bond domain',
domain=fe_domain,
fets_eval=self.fets_fb)
fe_grid_fb = FEGrid(coord_min=(0., length / 5.),
coord_max=(length, 0.),
shape=(self.shape, 1),
level=fe_fb_level,
fets_eval=self.fets_fb,
geo_transform=self.geo_transform)
return fe_domain, fe_grid_m, fe_grid_fb, fe_m_level, fe_fb_level
fe_domain = Property
def _get_fe_domain(self):
return self.fe_domain_structure[0]
fe_grid_m = Property
def _get_fe_grid_m(self):
return self.fe_domain_structure[1]
fe_grid_fb = Property
def _get_fe_grid_fb(self):
return self.fe_domain_structure[2]
fe_m_level = Property
def _get_fe_m_level(self):
return self.fe_domain_structure[3]
fe_fb_level = Property
def _get_fe_fb_level(self):
return self.fe_domain_structure[4]
#---------------------------------------------------------------------------
# Load scaling adapted to the elastic and inelastic regime
#---------------------------------------------------------------------------
final_displ = Property(depends_on='+input')
@cached_property
def _get_final_displ(self):
damage_onset_displ = self.mats_m.epsilon_0 * self.length
return damage_onset_displ / self.elastic_fraction
step_size = Property(depends_on='+input')
@cached_property
def _get_step_size(self):
n_steps = self.n_steps
return 1.0 / float(n_steps)
time_function = Property(depends_on='+input')
@cached_property
def _get_time_function(self):
'''Get the time function so that the elastic regime
is skipped in a single step.
'''
step_size = self.step_size
elastic_value = self.elastic_fraction * 0.98 * self.reduction_factor
inelastic_value = 1.0 - elastic_value
def ls(t):
if t <= step_size:
return (elastic_value / step_size) * t
else:
return elastic_value + (t - step_size) * (inelastic_value) / (
1 - step_size)
return ls
def plot_time_function(self, p):
'''Plot the time function.
'''
n_steps = self.n_steps
mats = self.mats
step_size = self.step_size
ls_t = linspace(0, step_size * n_steps, n_steps + 1)
ls_fn = frompyfunc(self.time_function, 1, 1)
ls_v = ls_fn(ls_t)
p.subplot(321)
p.plot(ls_t, ls_v, 'ro-')
final_epsilon = self.final_displ / self.length
kappa = linspace(mats.epsilon_0, final_epsilon, 10)
omega_fn = frompyfunc(lambda kappa: mats._get_omega(None, kappa), 1, 1)
omega = omega_fn(kappa)
kappa_scaled = (step_size + (1 - step_size) *
(kappa - mats.epsilon_0) /
(final_epsilon - mats.epsilon_0))
xdata = hstack([array([0.0], dtype=float), kappa_scaled])
ydata = hstack([array([0.0], dtype=float), omega])
p.plot(xdata, ydata, 'g')
p.xlabel('regular time [-]')
p.ylabel('scaled time [-]')
run = Button
@on_trait_change('run')
def peval(self):
'''Evaluation procedure.
'''
#mv = MATS1DDamageView( model = mats_eval )
#mv.configure_traits()
right_dof_m = self.fe_grid_m[-1, -1].dofs[0, 0, 0]
right_dof_fb = self.fe_grid_fb[-1, -1, -1, -1].dofs[0, 0, 0]
# Response tracers
A = self.A_m + self.A_f
self.sig_eps_m = RTraceGraph(name='F_u_m',
var_y='F_int',
idx_y=right_dof_m,
var_x='U_k',
idx_x=right_dof_m,
transform_y='y / %g' % A)
# Response tracers
self.sig_eps_f = RTraceGraph(name='F_u_f',
var_y='F_int',
idx_y=right_dof_fb,
var_x='U_k',
idx_x=right_dof_fb,
transform_y='y / %g' % A)
self.eps_m_field = RTraceDomainListField(name='eps_m',
position='int_pnts',
var='eps_app',
warp=False)
self.eps_f_field = RTraceDomainListField(name='eps_f',
position='int_pnts',
var='mats_phase2_eps_app',
warp=False)
# Response tracers
self.sig_m_field = RTraceDomainListField(name='sig_m',
position='int_pnts',
var='sig_app')
self.sig_f_field = RTraceDomainListField(name='sig_f',
position='int_pnts',
var='mats_phase2_sig_app')
self.omega_m_field = RTraceDomainListField(name='omega_m',
position='int_pnts',
var='omega',
warp=False)
self.shear_flow_field = RTraceDomainListField(name='shear flow',
position='int_pnts',
var='shear_flow',
warp=False)
self.slip_field = RTraceDomainListField(name='slip',
position='int_pnts',
var='slip',
warp=False)
avg_processor = None
if self.avg_radius > 0.0:
n_dofs = self.fe_domain.n_dofs
avg_processor = RTUAvg(sd=self.fe_m_level,
n_dofs=n_dofs,
avg_fn=QuarticAF(radius=self.avg_radius))
ts = TStepper(
u_processor=avg_processor,
dof_resultants=True,
sdomain=self.fe_domain,
bcond_list=[ # define the left clamping
BCSlice(var='u',
value=0.,
dims=[0],
slice=self.fe_grid_fb[0, 0, 0, :]),
# BCSlice( var = 'u', value = 0., dims = [0], slice = self.fe_grid_m[ 0, 0 ] ),
# loading at the right edge
# BCSlice( var = 'f', value = 1, dims = [0], slice = domain[-1, -1, -1, 0],
# time_function = ls ),
BCSlice(var='u',
value=self.final_displ,
dims=[0],
slice=self.fe_grid_fb[-1, -1, -1, :],
time_function=self.time_function),
# BCSlice( var = 'u', value = self.final_displ, dims = [0], slice = self.fe_grid_m[-1, -1],
# time_function = self.time_function ),
# fix horizontal displacement in the top layer
# BCSlice( var = 'u', value = 0., dims = [0], slice = domain[:, -1, :, -1] ),
# fix the vertical displacement all over the domain
BCSlice(var='u',
value=0.,
dims=[1],
slice=self.fe_grid_fb[:, :, :, :]),
# # Connect bond and matrix domains
BCDofGroup(var='u',
value=0.,
dims=[0],
get_link_dof_method=self.fe_grid_fb.get_bottom_dofs,
get_dof_method=self.fe_grid_m.get_all_dofs,
link_coeffs=[1.])
],
rtrace_list=[
self.sig_eps_m,
self.sig_eps_f,
self.eps_m_field,
self.eps_f_field,
self.sig_m_field,
self.sig_f_field,
self.omega_m_field,
self.shear_flow_field,
self.slip_field,
])
# Add the time-loop control
tloop = TLoop(tstepper=ts,
KMAX=300,
tolerance=1e-5,
debug=False,
verbose_iteration=True,
verbose_time=False,
tline=TLine(min=0.0, step=self.step_size, max=1.0))
tloop.on_accept_time_step = self.plot
U = tloop.eval()
self.sig_eps_f.refresh()
max_sig_m = max(self.sig_eps_m.trace.ydata)
return array([U[right_dof_m], max_sig_m], dtype='float_')
#--------------------------------------------------------------------------------------
# Tracers
#--------------------------------------------------------------------------------------
def plot_sig_eps(self, p):
p.set_xlabel('control displacement [mm]')
p.set_ylabel('stress [MPa]')
self.sig_eps_m.refresh()
self.sig_eps_m.trace.plot(p, 'o-')
self.sig_eps_f.refresh()
self.sig_eps_f.trace.plot(p, 'o-')
p.plot(self.sig_eps_m.trace.xdata,
self.sig_eps_m.trace.ydata + self.sig_eps_f.trace.ydata, 'o-')
def plot_eps(self, p):
eps_m = self.eps_m_field.subfields[0]
xdata = eps_m.vtk_X[:, 0]
ydata = eps_m.field_arr[:, 0, 0]
idata = argsort(xdata)
p.plot(xdata[idata], ydata[idata], 'o-')
eps_f = self.eps_f_field.subfields[1]
xdata = eps_f.vtk_X[:, 0]
ydata = eps_f.field_arr[:, 0, 0]
idata = argsort(xdata)
p.plot(xdata[idata], ydata[idata], 'o-')
p.set_ylim(ymin=0)
p.set_xlabel('bar axis [mm]')
p.set_ylabel('strain [-]')
def plot_omega(self, p):
omega_m = self.omega_m_field.subfields[0]
xdata = omega_m.vtk_X[:, 0]
ydata = omega_m.field_arr[:]
idata = argsort(xdata)
p.fill(xdata[idata], ydata[idata], facecolor='gray', alpha=0.2)
print 'max omega', max(ydata[idata])
p.set_ylim(ymin=0, ymax=1.0)
p.set_xlabel('bar axis [mm]')
p.set_ylabel('omega [-]')
def plot_sig(self, p):
sig_m = self.sig_m_field.subfields[0]
xdata = sig_m.vtk_X[:, 0]
ydata = sig_m.field_arr[:, 0, 0]
idata = argsort(xdata)
ymax = max(ydata)
p.plot(xdata[idata], ydata[idata], 'o-')
sig_f = self.sig_f_field.subfields[1]
xdata = sig_f.vtk_X[:, 0]
ydata = sig_f.field_arr[:, 0, 0]
idata = argsort(xdata)
p.plot(xdata[idata], ydata[idata], 'o-')
xdata = sig_f.vtk_X[:, 0]
ydata = sig_f.field_arr[:, 0, 0] + sig_m.field_arr[:, 0, 0]
p.plot(xdata[idata], ydata[idata], 'ro-')
p.set_ylim(ymin=0) # , ymax = 1.2 * ymax )
p.set_xlabel('bar axis [mm]')
p.set_ylabel('stress [MPa]')
def plot_shear_flow(self, p):
shear_flow = self.shear_flow_field.subfields[1]
xdata = shear_flow.vtk_X[:, 0]
ydata = shear_flow.field_arr[:, 0] / self.P_f
idata = argsort(xdata)
ymax = max(ydata)
p.plot(xdata[idata], ydata[idata], 'o-')
p.set_xlabel('bar axis [mm]')
p.set_ylabel('shear flow [N/m]')
def plot_slip(self, p):
slip = self.slip_field.subfields[1]
xdata = slip.vtk_X[:, 0]
ydata = slip.field_arr[:, 0]
idata = argsort(xdata)
ymax = max(ydata)
p.plot(xdata[idata], ydata[idata], 'ro-')
p.set_xlabel('bar axis [mm]')
p.set_ylabel('slip [N/m]')
def plot_tracers(self, p=p):
p.subplot(221)
self.plot_sig_eps(p)
p.subplot(223)
self.plot_eps(p)
p.subplot(224)
self.plot_sig(p)
#---------------------------------------------------------------
# PLOT OBJECT
#-------------------------------------------------------------------
figure_ld = Instance(Figure)
def _figure_ld_default(self):
figure = Figure(facecolor='white')
figure.add_axes([0.12, 0.13, 0.85, 0.74])
return figure
#---------------------------------------------------------------
# PLOT OBJECT
#-------------------------------------------------------------------
figure_eps = Instance(Figure)
def _figure_eps_default(self):
figure = Figure(facecolor='white')
figure.add_axes([0.12, 0.13, 0.85, 0.74])
return figure
#---------------------------------------------------------------
# PLOT OBJECT
#-------------------------------------------------------------------
figure_shear_flow = Instance(Figure)
def _figure_shear_flow_default(self):
figure = Figure(facecolor='white')
figure.add_axes([0.12, 0.13, 0.85, 0.74])
return figure
#---------------------------------------------------------------
# PLOT OBJECT
#-------------------------------------------------------------------
figure_sig = Instance(Figure)
def _figure_sig_default(self):
figure = Figure(facecolor='white')
figure.add_axes([0.12, 0.13, 0.85, 0.74])
return figure
#---------------------------------------------------------------
# PLOT OBJECT
#-------------------------------------------------------------------
figure_shear_flow = Instance(Figure)
def _figure_shear_flow_default(self):
figure = Figure(facecolor='white')
figure.add_axes([0.12, 0.13, 0.85, 0.74])
return figure
def plot(self):
self.figure_ld.clear()
ax = self.figure_ld.gca()
self.plot_sig_eps(ax)
self.figure_eps.clear()
ax = self.figure_eps.gca()
self.plot_eps(ax)
ax2 = ax.twinx()
self.plot_omega(ax2)
self.figure_sig.clear()
ax = self.figure_sig.gca()
self.plot_sig(ax)
ax2 = ax.twinx()
self.plot_omega(ax2)
self.figure_shear_flow.clear()
ax = self.figure_shear_flow.gca()
self.plot_shear_flow(ax)
ax2 = ax.twinx()
self.plot_slip(ax2)
self.data_changed = True
def get_sim_outputs(self):
'''
Specifies the results and their order returned by the model
evaluation.
'''
return [
SimOut(name='right end displacement', unit='m'),
SimOut(name='peak load', uni='MPa')
]
data_changed = Event
toolbar = ToolBar(Action(name="Run",
tooltip='Start computation',
image=ImageResource('kt-start'),
action="start_study"),
Action(name="Pause",
tooltip='Pause computation',
image=ImageResource('kt-pause'),
action="pause_study"),
Action(name="Stop",
tooltip='Stop computation',
image=ImageResource('kt-stop'),
action="stop_study"),
image_size=(32, 32),
show_tool_names=False,
show_divider=True,
name='view_toolbar'),
traits_view = View(HSplit(
VSplit(
Item('run', show_label=False),
VGroup(
Item('shape'),
Item('n_steps'),
Item('length'),
label='parameters',
id='crackloc.viewmodel.factor.geometry',
dock='tab',
scrollable=True,
),
VGroup(Item('E_m'),
Item('f_m_t'),
Item('avg_radius'),
Item('h_m'),
Item('b_m'),
Item('A_m', style='readonly'),
Item('mats_m', show_label=False),
label='Matrix',
dock='tab',
id='crackloc.viewmodel.factor.matrix',
scrollable=True),
VGroup(Item('E_f'),
Item('A_f'),
Item('mats_f', show_label=False),
label='Fiber',
dock='tab',
id='crackloc.viewmodel.factor.fiber',
scrollable=True),
VGroup(Group(
Item('tau_max'),
Item('s_crit'),
Item('P_f', style='readonly', show_label=True),
Item('K_b', style='readonly', show_label=True),
Item('T_max', style='readonly', show_label=True),
),
Item('mats_b', show_label=False),
label='Bond',
dock='tab',
id='crackloc.viewmodel.factor.bond',
scrollable=True),
VGroup(Item('rho', style='readonly', show_label=True),
label='Composite',
dock='tab',
id='crackloc.viewmodel.factor.jcomposite',
scrollable=True),
id='crackloc.viewmodel.left',
label='studied factors',
layout='tabbed',
dock='tab',
),
VSplit(
VGroup(
Item('figure_ld',
editor=MPLFigureEditor(),
resizable=True,
show_label=False),
label='stress-strain',
id='crackloc.viewmode.figure_ld_window',
dock='tab',
),
VGroup(
Item('figure_eps',
editor=MPLFigureEditor(),
resizable=True,
show_label=False),
label='strains profile',
id='crackloc.viewmode.figure_eps_window',
dock='tab',
),
VGroup(
Item('figure_sig',
editor=MPLFigureEditor(),
resizable=True,
show_label=False),
label='stress profile',
id='crackloc.viewmode.figure_sig_window',
dock='tab',
),
VGroup(
Item('figure_shear_flow',
editor=MPLFigureEditor(),
resizable=True,
show_label=False),
label='bond shear and slip profiles',
id='crackloc.viewmode.figure_shear_flow_window',
dock='tab',
),
id='crackloc.viewmodel.right',
),
id='crackloc.viewmodel.splitter',
),
title='SimVisage Component: Crack localization',
id='crackloc.viewmodel',
dock='tab',
resizable=True,
height=0.8,
width=0.8,
buttons=[OKButton])
class InfoShellMngr( HasTraits ):
'''Assessment tool
'''
#------------------------------------------
# specify default data input files:
#------------------------------------------
# raw input file for thicknesses (and coordinates)
#
geo_data_file = Str
def _geo_data_file_default( self ):
return 'input_geo_data.csv'
# raw input file for element numbers, coordinates, and stress_resultants
#
state_data_file = Str
def _state_data_file_default( self ):
return 'input_state_data.csv'
info_shell_uls = Property( Instance( LSTable ),
depends_on = 'state_data_file' )
@cached_property
def _get_info_shell_uls( self ):
return LSTable( geo_data = self.geo_data,
state_data = self.state_data,
ls = 'ULS' )
info_shell_sls = Property( Instance( LSTable ),
depends_on = 'state_data_file' )
@cached_property
def _get_info_shell_sls( self ):
return LSTable( geo_data = self.geo_data,
state_data = self.state_data,
ls = 'SLS' )
#------------------------------------------
# read the geometry data from file
# (corrds and thickness):
#------------------------------------------
def _read_geo_data( self, file_name ):
'''to read the stb-thickness save the xls-worksheet
to a csv-file using ';' as filed delimiter and ' ' (blank)
as text delimiter.
'''
# get the column headings defined in the second row
# of the csv thickness input file
# "Nr.;X;Y;Z;[mm]"
#
file = open( file_name, 'r' )
first_line = file.readline()
second_line = file.readline()
column_headings = second_line.split( ';' )
# remove '\n' from last string element in list
column_headings[-1] = column_headings[-1][:-1]
column_headings_arr = array( column_headings )
elem_no_idx = where( 'Nr.' == column_headings_arr )[0]
X_idx = where( 'X' == column_headings_arr )[0]
Y_idx = where( 'Y' == column_headings_arr )[0]
Z_idx = where( 'Z' == column_headings_arr )[0]
thickness_idx = where( '[mm]' == column_headings_arr )[0]
# read the float data:
#
input_arr = loadtxt( file_name, delimiter = ';', skiprows = 2 )
# element number:
#
elem_no = input_arr[:, elem_no_idx]
# coordinates [m]:
#
X = input_arr[:, X_idx]
Y = input_arr[:, Y_idx]
Z = input_arr[:, Z_idx]
# element thickness [mm]:
#
thickness = input_arr[:, thickness_idx]
return {'elem_no':elem_no,
'X':X, 'Y':Y, 'Z':Z,
'thickness':thickness }
# coordinates and element thickness read from file:
#
geo_data = Property( Dict, depends_on = 'geo_data_file' )
@cached_property
def _get_geo_data( self ):
return self._read_geo_data( self.geo_data_file )
#------------------------------------------
# read the state data from file
# (elem_no, coords, moments and normal forces):
#------------------------------------------
def _Xread_state_data( self, file_name ):
'''to read the stb-stress_resultants save the xls-worksheet
to a csv-file using ';' as filed delimiter and ' ' (blank)
as text delimiter.
'''
######################################################
# this method returns only the MAXIMUM VALUES!!!
# @todo: dublicate the elem number and coordinates and add also the minimum values
######################################################
# get the column headings defined in the second row
# of the csv soliciotations input file
#
# column_headings = array(["Nr.","Punkt","X","Y","Z","mx","my","mxy","vx","vy","nx","ny","nxy"])
file = open( file_name, 'r' )
lines = file.readlines()
column_headings = lines[1].split( ';' )
# remove '\n' from last string element in list
column_headings[-1] = column_headings[-1][:-1]
column_headings_arr = array( column_headings )
elem_no_idx = where( 'Nr.' == column_headings_arr )[0]
X_idx = where( 'X' == column_headings_arr )[0]
Y_idx = where( 'Y' == column_headings_arr )[0]
Z_idx = where( 'Z' == column_headings_arr )[0]
mx_idx = where( 'mx' == column_headings_arr )[0]
my_idx = where( 'my' == column_headings_arr )[0]
mxy_idx = where( 'mxy' == column_headings_arr )[0]
nx_idx = where( 'nx' == column_headings_arr )[0]
ny_idx = where( 'ny' == column_headings_arr )[0]
nxy_idx = where( 'nxy' == column_headings_arr )[0]
# define arrays containing the information from the raw input file
#
# @todo: check how loadtxt can be used directly
# instead of reading lines line by line?
# input_arr = loadtxt( file_name , delimiter=';', skiprows = 2 )
# read max-values (=first row of each double-line):
# read stress_resultant csv-input file line by line in steps of two
# starting in the third line returning an data array.
#
n_columns = len( lines[2].split( ';' ) )
# auxiliary line in array sliced off in input array
data_array = zeros( n_columns )
for n in range( 2, len( lines ), 2 ):
line_split = lines[n].split( ';' )
line_array = array( line_split, dtype = float )
data_array = vstack( [ data_array, line_array ] )
input_arr = data_array[1:, :]
# element number:
#
elem_no = input_arr[:, elem_no_idx]
# coordinates [m]:
#
X = input_arr[:, X_idx]
Y = input_arr[:, Y_idx]
Z = input_arr[:, Z_idx]
# moments [kNm/m]
#
mx = input_arr[:, mx_idx]
my = input_arr[:, my_idx]
mxy = input_arr[:, mxy_idx]
# normal forces [kN/m]:
#
nx = input_arr[:, nx_idx]
ny = input_arr[:, ny_idx]
nxy = input_arr[:, nxy_idx]
return { 'elem_no':elem_no, 'X':X, 'Y':Y, 'Z':Z,
'mx':mx, 'my':my, 'mxy':mxy,
'nx':nx, 'ny':ny, 'nxy':nxy }
def _read_state_data( self, file_name ):
'''to read the stb-stress_resultants save the xls-worksheet
to a csv-file using ';' as filed delimiter and ' ' (blank)
as text delimiter.
'''
######################################################
# this method returns only the MAXIMUM VALUES!!!
# @todo: dublicate the elem number and coordinates and add also the minimum values
######################################################
# get the column headings defined in the second row
# of the csv solicitations input file
#
# column_headings = array(["Nr.","Punkt","X","Y","Z","mx","my","mxy","vx","vy","nx","ny","nxy"])
file = open( file_name, 'r' )
lines = file.readlines()
column_headings = lines[1].split( ';' )
# remove '\n' from last string element in list
column_headings[-1] = column_headings[-1][:-1]
column_headings_arr = array( column_headings )
elem_no_idx = where( 'Nr.' == column_headings_arr )[0]
X_idx = where( 'X' == column_headings_arr )[0]
Y_idx = where( 'Y' == column_headings_arr )[0]
Z_idx = where( 'Z' == column_headings_arr )[0]
m1_idx = where( 'm1' == column_headings_arr )[0]
m2_idx = where( 'm2' == column_headings_arr )[0]
n1_idx = where( 'n1' == column_headings_arr )[0]
n2_idx = where( 'n2' == column_headings_arr )[0]
# define arrays containing the information from the raw input file
#
# @todo: check how loadtxt can be used directly
# instead of reading lines line by line?
# input_arr = loadtxt( file_name , delimiter=';', skiprows = 2 )
# read max-values (=first row of each double-line):
# read stress_resultant csv-input file line by line in steps of two
# starting in the third line returning an data array.
#
n_columns = len( lines[2].split( ';' ) )
# auxiliary line in array sliced off in input array
data_array = zeros( n_columns )
for n in range( 2, len( lines ), 2 ):
line_split = lines[n].split( ';' )
line_array = array( line_split, dtype = float )
data_array = vstack( [ data_array, line_array ] )
input_arr = data_array[1:, :]
# element number:
#
elem_no = input_arr[:, elem_no_idx]
# coordinates [m]:
#
X = input_arr[:, X_idx]
Y = input_arr[:, Y_idx]
Z = input_arr[:, Z_idx]
# moments [kNm/m]
#
mx = input_arr[:, m1_idx]
my = input_arr[:, m2_idx]
mxy = zeros_like( input_arr[:, m1_idx] )
# normal forces [kN/m]:
#
nx = input_arr[:, n1_idx]
ny = input_arr[:, n2_idx]
nxy = zeros_like( input_arr[:, m1_idx] )
return { 'elem_no':elem_no, 'X':X, 'Y':Y, 'Z':Z,
'mx':mx, 'my':my, 'mxy':mxy,
'nx':nx, 'ny':ny, 'nxy':nxy }
# ------------------------------------------------------------
# Read state data from file and assign attributes
# ------------------------------------------------------------
# coordinates and stress_resultants read from file:
#
state_data = Property( Dict, depends_on = 'state_data_file' )
@cached_property
def _get_state_data( self ):
return self._read_state_data( self.state_data_file )
# ------------------------------------------------------------
# check input files for consistency
# ------------------------------------------------------------
@on_trait_change( 'geo_data_file, state_data_file' )
def _check_input_files_for_consistency( self ):
'''check if the element order of the thickness input file is
identical to the order in the stress_resultant input file
'''
if not all( self.geo_data['X'] ) == all( self.state_data['X'] ) or \
not all( self.geo_data['Y'] ) == all( state_data['Y'] ) or \
not all( self.geo_data['Z'] ) == all( state_data['Z'] ):
raise ValueError, 'coordinates in file % s and file % s are not identical. Check input files for consistency ! ' \
% ( self.geo_data_file, self.state_data_file )
else:
print ' *** input files checked for consistency ( OK ) *** '
return True
# ------------------------------------------------------------
# View
# ------------------------------------------------------------
traits_view = View( VGroup(
Item( 'state_data_file',
label = 'Evaluated input file for stress_resultants ',
style = 'readonly', emphasized = True ),
Item( 'geo_data_file',
label = 'Evaluated input file for thicknesses ',
style = 'readonly', emphasized = True ),
Tabbed(
Group(
Item( 'info_shell_sls@', show_label = False ),
label = 'SLS' ),
Group(
Item( 'info_shell_uls@', show_label = False ),
label = 'ULS' ),
),
),
resizable = True,
scrollable = True,
height = 1000,
width = 1100
)
class CBView(ModelView):
def __init__(self, **kw):
super(CBView, self).__init__(**kw)
self.on_trait_change(self.refresh, 'model.+params')
self.refresh()
model = Instance(Model)
figure = Instance(Figure)
def _figure_default(self):
figure = Figure(facecolor='white')
return figure
figure2 = Instance(Figure)
def _figure2_default(self):
figure = Figure(facecolor='white')
return figure
data_changed = Event
def plot(self, fig, fig2):
figure = fig
figure.clear()
axes = figure.gca()
# plot PDF
axes.plot(self.model.w, self.model.model_rand, lw=2.0, color='blue', \
label='model')
axes.plot(self.model.w, self.model.interpolate_experiment(self.model.w), lw=1.0, color='black', \
label='experiment')
axes.legend(loc='best')
# figure2 = fig2
# figure2.clear()
# axes = figure2.gca()
# # plot PDF
# axes.plot(self.model.w2, self.model.model_extrapolate, lw=2.0, color='red', \
# label='model')
# axes.legend()
def refresh(self):
self.plot(self.figure, self.figure2)
self.data_changed = True
traits_view = View(HSplit(VGroup(
Group(
Item('model.tau_scale'),
Item('model.tau_shape'),
Item('model.tau_loc'),
Item('model.m'),
Item('model.sV0'),
Item('model.Ef'),
Item('model.w_min'),
Item('model.w_max'),
Item('model.w_pts'),
Item('model.n_int'),
Item('model.w2_min'),
Item('model.w2_max'),
Item('model.w2_pts'),
Item('model.sigmamu'),
),
id='pdistrib.distr_type.pltctrls',
label='Distribution parameters',
scrollable=True,
),
Tabbed(
Group(
Item('figure',
editor=MPLFigureEditor(),
show_label=False,
resizable=True),
scrollable=True,
label='Plot',
),
label='Plot',
id='pdistrib.figure.params',
dock='tab',
),
Tabbed(
Group(
Item('figure2',
editor=MPLFigureEditor(),
show_label=False,
resizable=True),
scrollable=True,
label='Plot',
),
label='Plot',
id='pdistrib.figure2',
dock='tab',
),
dock='tab',
id='pdistrib.figure.view'),
id='pdistrib.view',
dock='tab',
title='Statistical distribution',
buttons=[OKButton, CancelButton],
scrollable=True,
resizable=True,
width=600,
height=400)
class ExpST(ExType):
'''Experiment: Slab Test
'''
# label = Str('slab test')
implements(IExType)
#--------------------------------------------------------------------
# register a change of the traits with metadata 'input'
#--------------------------------------------------------------------
input_change = Event
@on_trait_change('+input, ccs.input_change, +ironing_param')
def _set_input_change(self):
self.input_change = True
#--------------------------------------------------------------------------------
# specify inputs:
#--------------------------------------------------------------------------------
edge_length = Float(1.25, unit='m', input=True, table_field=True,
auto_set=False, enter_set=True)
thickness = Float(0.06, unit='m', input=True, table_field=True,
auto_set=False, enter_set=True)
# age of the concrete at the time of testing
age = Int(28, unit='d', input=True, table_field=True,
auto_set=False, enter_set=True)
loading_rate = Float(2.0, unit='mm/min', input=True, table_field=True,
auto_set=False, enter_set=True)
#--------------------------------------------------------------------------
# composite cross section
#--------------------------------------------------------------------------
ccs = Instance(CompositeCrossSection)
def _ccs_default(self):
'''default settings correspond to
setup '7u_MAG-07-03_PZ-0708-1'
'''
fabric_layout_key = '2D-05-11'
# fabric_layout_key = 'MAG-07-03'
# fabric_layout_key = '2D-02-06a'
# concrete_mixture_key = 'PZ-0708-1'
# concrete_mixture_key = 'FIL-10-09'
# concrete_mixture_key = 'barrelshell'
concrete_mixture_key = 'PZ-0708-1'
# orientation_fn_key = 'all0'
orientation_fn_key = '90_0'
n_layers = 2
s_tex_z = 0.015 / (n_layers + 1)
ccs = CompositeCrossSection (
fabric_layup_list=[
plain_concrete(0.035),
# plain_concrete(s_tex_z * 0.5),
FabricLayUp (
n_layers=n_layers,
orientation_fn_key=orientation_fn_key,
s_tex_z=s_tex_z,
fabric_layout_key=fabric_layout_key
),
# plain_concrete(s_tex_z * 0.5)
plain_concrete(0.5)
],
concrete_mixture_key=concrete_mixture_key
)
return ccs
#--------------------------------------------------------------------------
# Get properties of the composite
#--------------------------------------------------------------------------
# E-modulus of the composite at the time of testing
E_c = Property(Float, unit='MPa', depends_on='input_change', table_field=True)
def _get_E_c(self):
return self.ccs.get_E_c_time(self.age)
# E-modulus of the composite after 28 days
E_c28 = DelegatesTo('ccs', listenable=False)
# reinforcement ration of the composite
rho_c = DelegatesTo('ccs', listenable=False)
#--------------------------------------------------------------------------------
# define processing
#--------------------------------------------------------------------------------
# put this into the ironing procedure processor
#
jump_rtol = Float(0.1,
auto_set=False, enter_set=True,
ironing_param=True)
data_array_ironed = Property(Array(float),
depends_on='data_array, +ironing_param, +axis_selection')
@cached_property
def _get_data_array_ironed(self):
'''remove the jumps in the displacement curves
due to resetting the displacement gauges.
'''
print '*** curve ironing activated ***'
# each column from the data array corresponds to a measured parameter
# e.g. displacement at a given point as function of time u = f(t))
#
data_array_ironed = copy(self.data_array)
for idx in range(self.data_array.shape[1]):
# use ironing method only for columns of the displacement gauges.
#
if self.names_and_units[0][ idx ] != 'Kraft' and \
self.names_and_units[0][ idx ] != 'Bezugskanal' and \
self.names_and_units[0][ idx ] != 'Weg':
# 1d-array corresponding to column in data_array
data_arr = copy(data_array_ironed[:, idx])
# get the difference between each point and its successor
jump_arr = data_arr[1:] - data_arr[0:-1]
# get the range of the measured data
data_arr_range = max(data_arr) - min(data_arr)
# determine the relevant criteria for a jump
# based on the data range and the specified tolerances:
jump_crit = self.jump_rtol * data_arr_range
# get the indexes in 'data_column' after which a
# jump exceeds the defined tolerance criteria
jump_idx = where(fabs(jump_arr) > jump_crit)[0]
print 'number of jumps removed in data_arr_ironed for', self.names_and_units[0][ idx ], ': ', jump_idx.shape[0]
# glue the curve at each jump together
for jidx in jump_idx:
# get the offsets at each jump of the curve
shift = data_arr[jidx + 1] - data_arr[jidx]
# shift all succeeding values by the calculated offset
data_arr[jidx + 1:] -= shift
data_array_ironed[:, idx] = data_arr[:]
return data_array_ironed
@on_trait_change('+ironing_param')
def process_source_data(self):
'''read in the measured data from file and assign
attributes after array processing.
NOTE: if center displacement gauge ('WA_M') is missing the measured
displacement of the cylinder ('Weg') is used instead.
A minor mistake is made depending on how much time passes
before the cylinder has contact with the slab.
'''
print '*** process source data ***'
self._read_data_array()
# curve ironing:
#
self.processed_data_array = self.data_array_ironed
# set attributes:
#
self._set_array_attribs()
if 'WA_M' not in self.factor_list:
print '*** NOTE: Displacement gauge at center ("WA_M") missing. Cylinder displacement ("Weg") is used instead! ***'
self.WA_M = self.Weg
#--------------------------------------------------------------------------------
# plot templates
#--------------------------------------------------------------------------------
plot_templates = {'force / deflection (all)' : '_plot_force_deflection',
# 'force / average deflection (c; ce; e) interpolated' : '_plot_force_deflection_avg_interpolated',
# 'force / deflection (center)' : '_plot_force_center_deflection',
# 'smoothed force / deflection (center)' : '_plot_force_center_deflection_smoothed',
# 'force / deflection (edges)' : '_plot_force_edge_deflection',
# 'force / deflection (center-edges)' : '_plot_force_center_edge_deflection',
# 'force / average deflection (edges)' : '_plot_force_edge_deflection_avg',
# 'force / average deflection (center-edges)' : '_plot_force_center_edge_deflection_avg',
# 'force / average deflection (c; ce; e)' : '_plot_force_deflection_avg',
# 'force / deflection (center) interpolated' : '_plot_force_center_deflection_interpolated',
# 'force / deflection (corner)' : '_plot_force_corner_deflection',
# 'edge_deflection_avg (front/back) / edge_deflection_avg (left/right)' : '_plot_edge_deflection_edge_deflection_avg',
}
default_plot_template = 'force / deflection (center)'
n_fit_window_fraction = Float(0.1)
# get only the ascending branch of the response curve
#
max_force_idx = Property(Int)
def _get_max_force_idx(self):
'''get the index of the maximum force'''
return argmax(-self.Kraft)
f_asc = Property(Array)
def _get_f_asc(self):
'''get only the ascending branch of the response curve'''
return -self.Kraft[:self.max_force_idx + 1]
w_asc = Property(Array)
def _get_w_asc(self):
'''get only the ascending branch of the response curve'''
return -self.WA_M[:self.max_force_idx + 1]
n_points = Property(Int)
def _get_n_points(self):
return int(self.n_fit_window_fraction * len(self.w_asc))
f_smooth = Property()
def _get_f_smooth(self):
return smooth(self.f_asc, self.n_points, 'flat')
w_smooth = Property()
def _get_w_smooth(self):
return smooth(self.w_asc, self.n_points, 'flat')
def _plot_force_deflection(self, axes, offset_w=0., color='blue', linewidth=1.5, linestyle='-'):
'''plot the F-w-diagramm for all displacement gauges including maschine displacement
'''
xkey = 'deflection [mm]'
ykey = 'force [kN]'
max_force_idx = self.max_force_idx
# max_force_idx = -2
f_asc = -self.Kraft[:max_force_idx + 1]
print 'self.factor_list', self.factor_list
header_string = ''
for i in self.factor_list[2:]:
header_string = header_string + i + '; '
T_arr = -getattr(self, i)
T_asc = T_arr[:max_force_idx + 1]
axes.plot(T_asc, f_asc, label=i)
axes.legend()
img_dir = os.path.join(simdb.exdata_dir, 'img_dir')
# check if directory exist otherwise create
#
if os.path.isdir(img_dir) == False:
os.makedirs(img_dir)
test_series_dir = os.path.join(img_dir, 'slab_test_astark')
# check if directory exist otherwise create
#
if os.path.isdir(test_series_dir) == False:
os.makedirs(test_series_dir)
out_file = os.path.join(test_series_dir, self.key)
np.savetxt(out_file, self.processed_data_array, delimiter=';')
# workaround for old numpy.savetxt version:
f = open(out_file, 'r')
temp = f.read()
f.close()
f = open(out_file, 'w')
f.write(header_string)
f.write(temp)
f.close()
def _plot_force_center_deflection(self, axes, offset_w=0., color='blue', linewidth=1.5, linestyle='-'):
'''plot the F-w-diagramm for the center (c) deflection
'''
xkey = 'deflection [mm]'
ykey = 'force [kN]'
xdata = -self.WA_M
ydata = -self.Kraft
xdata += offset_w
# axes.set_xlabel('%s' % (xkey,))
# axes.set_ylabel('%s' % (ykey,))
axes.plot(xdata, ydata, color=color, linewidth=linewidth, linestyle=linestyle)
def _plot_force_corner_deflection(self, axes):
'''plot the F-w-diagramm for the corner deflection (at the center of one of the supports)
'''
xkey = 'deflection [mm]'
ykey = 'force [kN]'
xdata = -self.WA_Eck
ydata = -self.Kraft
# axes.set_xlabel('%s' % (xkey,))
# axes.set_ylabel('%s' % (ykey,))
axes.plot(xdata, ydata
# color = c, linewidth = w, linestyle = s
)
def _plot_force_center_deflection_smoothed(self, axes):
'''plot the F-w-diagramm for the center (c) deflection (smoothed curves)
'''
axes.plot(self.w_smooth, self.f_smooth, color='blue', linewidth=1)
# secant_stiffness_w10 = (f_smooth[10] - f_smooth[0]) / (w_smooth[10] - w_smooth[0])
# w0_lin = array([0.0, w_smooth[10] ], dtype = 'float_')
# f0_lin = array([0.0, w_smooth[10] * secant_stiffness_w10 ], dtype = 'float_')
# axes.plot( w0_lin, f0_lin, color = 'black' )
def _plot_force_center_deflection_interpolated(self, axes, linestyle='-', linewidth=1.5, plot_elastic_stiffness=True):
'''plot the F-w-diagramm for the center (c) deflection (interpolated initial stiffness)
'''
# get the index of the maximum stress
max_force_idx = argmax(-self.Kraft)
# get only the ascending branch of the response curve
f_asc = -self.Kraft[:max_force_idx + 1]
w_m = -self.WA_M[:max_force_idx + 1]
# w_m -= 0.17
# axes.plot(w_m, f_asc, color = 'blue', linewidth = 1)
# move the starting point of the center deflection curve to the point where the force starts
# (remove offset in measured displacement where there is still no force measured)
#
idx_0 = np.where(f_asc > 0.0)[0][0]
f_asc_cut = np.hstack([f_asc[ idx_0: ]])
w_m_cut = np.hstack([w_m[ idx_0: ]]) - w_m[ idx_0 ]
# print 'f_asc_cut.shape', f_asc_cut.shape
# fw_arr = np.hstack([f_asc_cut[:, None], w_m_cut[:, None]])
# print 'fw_arr.shape', fw_arr.shape
# np.savetxt('ST-6c-2cm-TU_bs2_f-w_asc.csv', fw_arr, delimiter=';')
axes.plot(w_m_cut, f_asc_cut, color='k', linewidth=linewidth, linestyle=linestyle)
# composite E-modulus
#
E_c = self.E_c
print 'E_c', E_c
if self.thickness == 0.02 and self.edge_length == 0.80 and plot_elastic_stiffness == True:
K_linear = E_c / 24900. * 1.056 # [MN/m]=[kN/mm] bending stiffness with respect to center force
max_f = f_asc_cut[-1]
w_linear = np.array([0., max_f / K_linear])
f_linear = np.array([0., max_f])
axes.plot(w_linear, f_linear, linewidth=linewidth, linestyle='--', color='k')
if self.thickness == 0.03 and self.edge_length == 1.25 and plot_elastic_stiffness == True:
K_linear = E_c / 24900. * 1.267 # [MN/m]=[kN/mm] bending stiffness with respect to center force
max_f = f_asc_cut[-1]
w_linear = np.array([0., max_f / K_linear])
f_linear = np.array([0., max_f])
axes.plot(w_linear, f_linear, linewidth=linewidth, linestyle='--', color='k')
if self.thickness == 0.06 and self.edge_length == 1.25 and plot_elastic_stiffness == True:
K_linear = E_c / 24900. * 10.14 # [MN/m]=[kN/mm] bending stiffness with respect to center force
max_f = f_asc_cut[-1]
w_linear = np.array([0., max_f / K_linear])
f_linear = np.array([0., max_f])
axes.plot(w_linear, f_linear, linewidth=linewidth, linestyle='--', color='k')
def _plot_force_edge_deflection(self, axes):
'''plot the F-w-diagramm for the edge (e) deflections
'''
max_force_idx = self.max_force_idx
f_asc = self.f_asc
w_v_asc = -self.WA_V[:max_force_idx + 1]
w_h_asc = -self.WA_H[:max_force_idx + 1]
w_l_asc = -self.WA_L[:max_force_idx + 1]
w_r_asc = -self.WA_R[:max_force_idx + 1]
axes.plot(w_v_asc, f_asc, color='blue', linewidth=1)
axes.plot(w_h_asc, f_asc, color='blue', linewidth=1)
axes.plot(w_l_asc, f_asc, color='green', linewidth=1)
axes.plot(w_r_asc, f_asc, color='green', linewidth=1)
def _plot_force_edge_deflection_avg(self, axes):
'''plot the average F-w-diagramm for the edge (e) deflections
'''
max_force_idx = self.max_force_idx
f_asc = self.f_asc
w_v_asc = -self.WA_V[:max_force_idx + 1]
w_h_asc = -self.WA_H[:max_force_idx + 1]
w_l_asc = -self.WA_L[:max_force_idx + 1]
w_r_asc = -self.WA_R[:max_force_idx + 1]
# get the average displacement values of the corresponding displacement gauges
w_vh_asc = (w_v_asc + w_h_asc) / 2
w_lr_asc = (w_l_asc + w_r_asc) / 2
axes.plot(w_vh_asc, f_asc, color='blue', linewidth=1, label='w_vh')
axes.plot(w_lr_asc, f_asc, color='blue', linewidth=1, label='w_lr')
axes.legend()
def _plot_edge_deflection_edge_deflection_avg(self, axes):
'''plot the average edge (e) deflections for the front/back and left/right
'''
max_force_idx = self.max_force_idx
w_v_asc = -self.WA_V[:max_force_idx + 1]
w_h_asc = -self.WA_H[:max_force_idx + 1]
w_l_asc = -self.WA_L[:max_force_idx + 1]
w_r_asc = -self.WA_R[:max_force_idx + 1]
# get the average displacement values of the corresponding displacement gauges
w_vh_asc = (w_v_asc + w_h_asc) / 2
w_lr_asc = (w_l_asc + w_r_asc) / 2
axes.plot(w_vh_asc, w_lr_asc, color='blue', linewidth=1, label='w_vh / w_lr')
axes.plot(np.array([0, w_vh_asc[-1]]), np.array([0, w_vh_asc[-1]]), color='k', linewidth=1, linestyle='-')
axes.legend()
def _plot_force_center_edge_deflection(self, axes):
'''plot the F-w-diagramm for the center-edge (ce) deflections
'''
max_force_idx = argmax(-self.Kraft)
# get only the ascending branch of the response curve
f_asc = -self.Kraft[:max_force_idx + 1]
w_ml_asc = -self.WA_ML[:max_force_idx + 1]
w_mr_asc = -self.WA_MR[:max_force_idx + 1]
axes.plot(w_ml_asc, f_asc, color='blue', linewidth=1, label='w_ml')
axes.plot(w_mr_asc, f_asc, color='blue', linewidth=1, label='w_mr')
axes.legend()
def _plot_force_center_edge_deflection_avg(self, axes):
'''plot the average F-w-diagramm for the center-edge (ce) deflections
'''
# get the index of the maximum stress
max_force_idx = argmax(-self.Kraft)
# get only the ascending branch of the response curve
f_asc = -self.Kraft[:max_force_idx + 1]
w_ml_asc = -self.WA_ML[:max_force_idx + 1]
w_mr_asc = -self.WA_MR[:max_force_idx + 1]
# get the average displacement values of the corresponding displacement gauges
w_mlmr_asc = (w_ml_asc + w_mr_asc) / 2
axes.plot(w_mlmr_asc, f_asc, color='blue', linewidth=1)
def _plot_force_deflection_avg(self, axes):
'''plot the average F-w-diagramms for the center(c), center-edge (ce) and edge(vh) and edge (lr) deflections
'''
# get the index of the maximum stress
max_force_idx = argmax(-self.Kraft)
# get only the ascending branch of the response curve
f_asc = -self.Kraft[:max_force_idx + 1]
w_m = -self.WA_M[:max_force_idx + 1]
axes.plot(w_m, f_asc, color='blue', linewidth=1)
# ## center-edge deflection (ce)
w_ml_asc = -self.WA_ML[:max_force_idx + 1]
w_mr_asc = -self.WA_MR[:max_force_idx + 1]
# get the average displacement values of the corresponding displacement gauges
w_mlmr_asc = (w_ml_asc + w_mr_asc) / 2
axes.plot(w_mlmr_asc, f_asc, color='red', linewidth=1)
# ## edge deflections (e)
w_v_asc = -self.WA_V[:max_force_idx + 1]
w_h_asc = -self.WA_H[:max_force_idx + 1]
w_l_asc = -self.WA_L[:max_force_idx + 1]
w_r_asc = -self.WA_R[:max_force_idx + 1]
# get the average displacement values of the corresponding displacement gauges
w_vh_asc = (w_v_asc + w_h_asc) / 2
w_lr_asc = (w_l_asc + w_r_asc) / 2
axes.plot(w_vh_asc, f_asc, color='green', linewidth=1, label='w_vh')
axes.plot(w_lr_asc, f_asc, color='blue', linewidth=1, label='w_lr')
# # set axis-labels
# xkey = 'deflection [mm]'
# ykey = 'force [kN]'
# axes.set_xlabel('%s' % (xkey,))
# axes.set_ylabel('%s' % (ykey,))
def _plot_force_deflection_avg_interpolated(self, axes, linewidth=1):
'''plot the average F-w-diagrams for the center(c), center-edge (ce) and edge(vh) and edge (lr) deflections
NOTE: center deflection curve is cut at its starting point in order to remove offset in the dispacement meassurement
'''
# get the index of the maximum stress
max_force_idx = argmax(-self.Kraft)
# get only the ascending branch of the response curve
f_asc = -self.Kraft[:max_force_idx + 1]
w_m = -self.WA_M[:max_force_idx + 1]
# w_m -= 0.17
# axes.plot(w_m, f_asc, color = 'blue', linewidth = 1)
# move the starting point of the center deflection curve to the point where the force starts
# (remove offset in measured displacement where there is still no force measured)
#
idx_0 = np.where(f_asc > 0.05)[0][0]
f_asc_cut = f_asc[ idx_0: ]
w_m_cut = w_m[ idx_0: ] - w_m[ idx_0 ]
axes.plot(w_m_cut, f_asc_cut, color='k', linewidth=linewidth)
# plot machine displacement (hydraulic cylinder)
#
# Weg_asc = -self.Weg[ :max_force_idx + 1 ]
# axes.plot(Weg_asc, f_asc, color='k', linewidth=1.5)
# ## center-edge deflection (ce)
w_ml_asc = -self.WA_ML[:max_force_idx + 1]
w_mr_asc = -self.WA_MR[:max_force_idx + 1]
# get the average displacement values of the corresponding displacement gauges
w_mlmr_asc = (w_ml_asc + w_mr_asc) / 2
# axes.plot(w_mlmr_asc, f_asc, color='red', linewidth=1)
axes.plot(w_ml_asc, f_asc, color='k', linewidth=linewidth)
axes.plot(w_mr_asc, f_asc, color='k', linewidth=linewidth)
# ## edge deflections (e)
w_v_asc = -self.WA_V[:max_force_idx + 1]
w_h_asc = -self.WA_H[:max_force_idx + 1]
w_l_asc = -self.WA_L[:max_force_idx + 1]
w_r_asc = -self.WA_R[:max_force_idx + 1]
axes.plot(w_v_asc, f_asc, color='grey', linewidth=linewidth)
axes.plot(w_h_asc, f_asc, color='grey', linewidth=linewidth)
axes.plot(w_l_asc, f_asc, color='k', linewidth=linewidth)
axes.plot(w_r_asc, f_asc, color='k', linewidth=linewidth)
# get the average displacement values of the corresponding displacement gauges
# w_vh_asc = (w_v_asc + w_h_asc) / 2
# w_lr_asc = (w_l_asc + w_r_asc) / 2
# axes.plot(w_vh_asc, f_asc, color='green', linewidth=1, label='w_vh')
# axes.plot(w_lr_asc, f_asc, color='blue', linewidth=1, label='w_lr')
# save 'F-w-arr_m-mlmr-vh-lr' in directory "/simdb/simdata/exp_st"
# simdata_dir = os.path.join(simdb.simdata_dir, 'exp_st')
# if os.path.isdir(simdata_dir) == False:
# os.makedirs(simdata_dir)
# filename = os.path.join(simdata_dir, 'F-w-arr_m-mlmr-vh-lr_' + self.key + '.csv')
# Fw_m_mlmr_vh_lr_arr = np.hstack([f_asc[:, None], w_m[:, None] - w_m[ idx_0 ], w_mlmr_asc[:, None], w_vh_asc[:, None], w_lr_asc[:, None]])
# print 'Fw_m_mlmr_vh_lr_arr'
# np.savetxt(filename, Fw_m_mlmr_vh_lr_arr, delimiter=';')
# print 'F-w-curves for center, middle, edges saved to file %s' % (filename)
#--------------------------------------------------------------------------------
# view
#--------------------------------------------------------------------------------
traits_view = View(VGroup(
Group(
Item('jump_rtol', format_str="%.4f"),
label='curve_ironing'
),
Group(
Item('thickness', format_str="%.3f"),
Item('edge_length', format_str="%.3f"),
label='geometry'
),
Group(
Item('loading_rate'),
Item('age'),
label='loading rate and age'
),
Group(
Item('E_c', show_label=True, style='readonly', format_str="%.0f"),
Item('ccs@', show_label=False),
label='composite cross section'
)
),
scrollable=True,
resizable=True,
height=0.8,
width=0.6
)
class ExpEM(ExType):
'''Experiment: Elastic Modulus Test
'''
# label = Str('three point bending test')
implements(IExType)
file_ext = 'TRA'
#--------------------------------------------------------------------
# register a change of the traits with metadata 'input'
#--------------------------------------------------------------------
input_change = Event
@on_trait_change('+input, ccs.input_change, +ironing_param')
def _set_input_change(self):
self.input_change = True
#--------------------------------------------------------------------------------
# specify inputs:
#--------------------------------------------------------------------------------
edge_length = Float(0.06,
unit='m',
input=True,
table_field=True,
auto_set=False,
enter_set=True)
height = Float(0.12,
unit='m',
input=True,
table_field=True,
auto_set=False,
enter_set=True)
gauge_length = Float(0.10,
unit='m',
input=True,
table_field=True,
auto_set=False,
enter_set=True)
# age of the concrete at the time of testing
age = Int(39,
unit='d',
input=True,
table_field=True,
auto_set=False,
enter_set=True)
loading_rate = Float(0.6,
unit='MPa/s',
input=True,
table_field=True,
auto_set=False,
enter_set=True)
#--------------------------------------------------------------------------
# composite cross section
#--------------------------------------------------------------------------
ccs = Instance(CompositeCrossSection)
def _ccs_default(self):
'''default settings correspond to
setup '7u_MAG-07-03_PZ-0708-1'
'''
# fabric_layout_key = 'MAG-07-03'
# fabric_layout_key = '2D-02-06a'
fabric_layout_key = '2D-05-11'
# concrete_mixture_key = 'PZ-0708-1'
concrete_mixture_key = 'FIL-10-09'
orientation_fn_key = 'all0'
# orientation_fn_key = 'all90'
# orientation_fn_key = '90_0'
n_layers = 12
s_tex_z = 0.060 / (n_layers + 1)
ccs = CompositeCrossSection(fabric_layup_list=[
plain_concrete(s_tex_z * 0.5),
FabricLayUp(n_layers=n_layers,
orientation_fn_key=orientation_fn_key,
s_tex_z=s_tex_z,
fabric_layout_key=fabric_layout_key),
plain_concrete(s_tex_z * 0.5)
],
concrete_mixture_key=concrete_mixture_key)
return ccs
#--------------------------------------------------------------------------
# Get properties of the composite
#--------------------------------------------------------------------------
# E-modulus of the composite at the time of testing
E_c = Property(Float,
unit='MPa',
depends_on='input_change',
table_field=True)
def _get_E_c(self):
return self.ccs.get_E_c_time(self.age)
# E-modulus of the composite after 28 days
E_c28 = DelegatesTo('ccs', listenable=False)
# reinforcement ration of the composite
rho_c = DelegatesTo('ccs', listenable=False)
#--------------------------------------------------------------------------------
# define processing
#--------------------------------------------------------------------------------
def _read_data_array(self):
''' Read the experiment data.
'''
print 'READ FILE'
_data_array = np.loadtxt(self.data_file,
delimiter=';',
skiprows=2,
usecols=(4, 5, 10, 17, 20))
self.data_array = _data_array
names_and_units = Property
@cached_property
def _get_names_and_units(self):
''' Set the names and units of the measured data.
'''
names = ['delta_u1', 'delta_u2', 'w', 'F', 'time']
units = ['mm', 'mm', 'mm', 'kN', 's']
return names, units
#0#"Arbeit";
#1#"Dehn. abs";
#2#"Dehn. abs (2. Kanal)";
#3#"Dehnung";
#4#"Dehnung (1. Kanal)";
#5#"Dehnung (2. Kanal)";
#6#"Dehnung nominell";
#7#"DeltaE";
#8#"E1 korr";
#9#"E2 korr";
#10#"Kolbenweg";
#11#"Kolbenweg abs.";
#12#"Lastrahmen";
#13#"LE-Kanal";
#14#"PrXXXfzeit";
#15#"Querdehnung";
#16#"S korr";
#17#"Standardkraft";
#18#"Vorlaufzeit";
#19#"Weg";
#20#"Zeit";
#21#"Zyklus"
#
#"Nm";
#"mm";
#"mm";
#"mm";
#"mm";
#"mm";
#"mm";
#"%";
#"mm";
#" ";
#"mm";
#"mm";
#" ";
#"mm";
#"s";
#"mm";
#" ";
#"N";
#"s";
#"mm";
#"s";
#" "
#--------------------------------------------------------------------------------
# plot templates
#--------------------------------------------------------------------------------
plot_templates = {
'force / displacement': '_plot_force_displacement',
'stress / strain': '_plot_stress_strain',
'stress / time': '_plot_stress_time',
}
default_plot_template = 'force / displacement'
def _plot_force_displacement(self, axes):
xkey = 'deflection [mm]'
ykey = 'force [kN]'
xdata = self.w
ydata = self.F / 1000. # convert from [N] to [kN]
axes.set_xlabel('%s' % (xkey, ))
axes.set_ylabel('%s' % (ykey, ))
axes.plot(xdata, ydata
# color = c, linewidth = w, linestyle = s
)
def _plot_stress_strain(self, axes):
sig = (self.F / 1000000.) / (self.edge_length**2
) # convert from [N] to [MN]
eps1 = (self.delta_u1 / 1000.) / self.gauge_length
eps2 = (self.delta_u2 / 1000.) / self.gauge_length
eps_m = (eps1 + eps2) / 2.
axes.plot(eps_m, sig, color='blue', linewidth=2)
def _plot_stress_time(self, axes):
sig = (self.F / 1000000.) / (self.edge_length**2
) # convert from [N] to [MN]
axes.plot(self.time, sig, color='blue', linewidth=2)
def _plot_displ_time(self, axes):
axes.plot(self.time, self.displ, color='blue', linewidth=2)
#--------------------------------------------------------------------------------
# view
#--------------------------------------------------------------------------------
traits_view = View(VGroup(
Group(Item('edge_length', format_str="%.3f"),
Item('height', format_str="%.3f"),
Item('gauge_length', format_str="%.3f"),
label='geometry'),
Group(Item('loading_rate'), Item('age'), label='loading rate and age'),
Group(Item('E_c', show_label=True, style='readonly',
format_str="%.0f"),
Item('ccs@', show_label=False),
label='composite cross section')),
scrollable=True,
resizable=True,
height=0.8,
width=0.6)
class ECBCrossSection(ECBCrossSectionState):
'''Cross section characteristics needed for tensile specimens
'''
matrix_cs = Instance(ECBMatrixCrossSection)
def _matrix_cs_default(self):
return ECBMatrixCrossSection()
reinf = List(ECBReinfComponent)
'''Components of the cross section including the matrix and reinforcement.
'''
matrix_cs_with_state = Property(depends_on='matrix_cs')
@cached_property
def _get_matrix_cs_with_state(self):
self.matrix_cs.state = self
return self.matrix_cs
reinf_components_with_state = Property(depends_on='reinf')
'''Components linked to the strain state of the cross section
'''
@cached_property
def _get_reinf_components_with_state(self):
for r in self.reinf:
r.state = self
r.matrix_cs = self.matrix_cs
return self.reinf
height = DelegatesTo('matrix_cs')
unit_conversion_factor = Constant(1000.0)
'''Convert the MN to kN
'''
#===========================================================================
# State management
#===========================================================================
changed = Event
'''Notifier of a changed in some component of a cross section
'''
@on_trait_change('+eps_input')
def _notify_eps_change(self):
self.changed = True
self.matrix_cs.eps_changed = True
for c in self.reinf:
c.eps_changed = True
#===========================================================================
# Cross-sectional stress resultants
#===========================================================================
N = Property(depends_on='changed')
'''Get the resulting normal force.
'''
@cached_property
def _get_N(self):
N_matrix = self.matrix_cs_with_state.N
return N_matrix + np.sum([c.N for c in self.reinf_components_with_state])
M = Property(depends_on='changed')
'''Get the resulting moment.
'''
@cached_property
def _get_M(self):
M_matrix = self.matrix_cs_with_state.M
M = M_matrix + np.sum([c.M for c in self.reinf_components_with_state])
return M - self.N * self.height / 2.
figure = Instance(Figure)
def _figure_default(self):
figure = Figure(facecolor='white')
figure.add_axes([0.08, 0.13, 0.85, 0.74])
return figure
data_changed = Event
replot = Button
def _replot_fired(self):
self.figure.clear()
ax = self.figure.add_subplot(2, 2, 1)
self.plot_eps(ax)
ax = self.figure.add_subplot(2, 2, 2)
self.plot_sig(ax)
ax = self.figure.add_subplot(2, 2, 3)
self.cc_law.plot(ax)
ax = self.figure.add_subplot(2, 2, 4)
self.ecb_law.plot(ax)
self.data_changed = True
def plot_eps(self, ax):
# ax = self.figure.gca()
d = self.thickness
# eps ti
ax.plot([-self.eps_lo, -self.eps_up], [0, self.thickness], color='black')
ax.hlines(self.zz_ti_arr, [0], -self.eps_ti_arr, lw=4, color='red')
# eps cj
ec = np.hstack([self.eps_cj_arr] + [0, 0])
zz = np.hstack([self.zz_cj_arr] + [0, self.thickness ])
ax.fill(-ec, zz, color='blue')
# reinforcement layers
eps_range = np.array([max(0.0, self.eps_lo),
min(0.0, self.eps_up)], dtype='float')
z_ti_arr = np.ones_like(eps_range)[:, None] * self.z_ti_arr[None, :]
ax.plot(-eps_range, z_ti_arr, 'k--', color='black')
# neutral axis
ax.plot(-eps_range, [d, d], 'k--', color='green', lw=2)
ax.spines['left'].set_position('zero')
ax.spines['right'].set_color('none')
ax.spines['top'].set_color('none')
ax.spines['left'].set_smart_bounds(True)
ax.spines['bottom'].set_smart_bounds(True)
ax.xaxis.set_ticks_position('bottom')
ax.yaxis.set_ticks_position('left')
def plot_sig(self, ax):
d = self.thickness
# f ti
ax.hlines(self.zz_ti_arr, [0], -self.f_ti_arr, lw=4, color='red')
# f cj
f_c = np.hstack([self.f_cj_arr] + [0, 0])
zz = np.hstack([self.zz_cj_arr] + [0, self.thickness ])
ax.fill(-f_c, zz, color='blue')
f_range = np.array([np.max(self.f_ti_arr), np.min(f_c)], dtype='float_')
# neutral axis
ax.plot(-f_range, [d, d], 'k--', color='green', lw=2)
ax.spines['left'].set_position('zero')
ax.spines['right'].set_color('none')
ax.spines['top'].set_color('none')
ax.spines['left'].set_smart_bounds(True)
ax.spines['bottom'].set_smart_bounds(True)
ax.xaxis.set_ticks_position('bottom')
ax.yaxis.set_ticks_position('left')
view = View(HSplit(Group(
HGroup(
Group(Item('thickness', springy=True),
Item('width'),
Item('n_layers'),
Item('n_rovings'),
Item('A_roving'),
label='Geometry',
springy=True
),
Group(Item('eps_up', label='Upper strain', springy=True),
Item('eps_lo', label='Lower strain'),
label='Strain',
springy=True
),
springy=True,
),
HGroup(
Group(VGroup(
Item('cc_law_type', show_label=False, springy=True),
Item('cc_law', label='Edit', show_label=False, springy=True),
Item('show_cc_law', label='Show', show_label=False, springy=True),
springy=True
),
Item('f_ck', label='Compressive strength'),
Item('n_cj', label='Discretization'),
label='Concrete',
springy=True
),
Group(VGroup(
Item('ecb_law_type', show_label=False, springy=True),
Item('ecb_law', label='Edit', show_label=False, springy=True),
Item('show_ecb_law', label='Show', show_label=False, springy=True),
springy=True,
),
label='Reinforcement',
springy=True
),
springy=True,
),
Group(Item('s_tex_z', label='vertical spacing', style='readonly'),
label='Layout',
),
Group(
HGroup(Item('M', springy=True, style='readonly'),
Item('N', springy=True, style='readonly'),
),
label='Stress resultants'
),
scrollable=True,
),
Group(Item('replot', show_label=False),
Item('figure', editor=MPLFigureEditor(),
resizable=True, show_label=False),
id='simexdb.plot_sheet',
label='plot sheet',
dock='tab',
),
),
width=0.8,
height=0.7,
resizable=True,
buttons=['OK', 'Cancel'])
class MKPullOut(HasTraits):
rf = Instance(DoublePulloutSym)
def _rf_default(self):
return DoublePulloutSym(tau_fr=3.14,
l=0.0,
d=25.5e-3,
E_mod=70.0e3,
theta=0.0,
xi=0.0179,
phi=1.,
L=30.0)
#--------------------------------------------------------------------------------
# select the concrete mixture from the concrete database:
#--------------------------------------------------------------------------------
param_distribs_key = Enum(MKPullOutParamDistribs.db.keys(),
simdb=True,
input=True,
auto_set=False,
enter_set=True)
param_distribs_ref = Property(Instance(SimDBClass),
depends_on='param_distribs_key')
@cached_property
def _get_param_distribs_ref(self):
return MKPullOutParamDistribs.db[self.param_distribs_key]
po = Property(Instance(YarnPullOut), depends_on='param_distribs_key')
@cached_property
def _get_po(self):
pd = self.param_distribs_ref
return YarnPullOut(rf=self.rf,
pdf_phi=pd.phi,
pdf_phi_on=True,
pdf_theta=pd.theta,
pdf_theta_on=True,
pdf_l=pd.ell,
pdf_ell_on=True,
n_f=1743,
w_max=1.2)
#--------------------------------------------------------------------------------
# view
#--------------------------------------------------------------------------------
traits_view = View(
VSplit(
VGroup(
Spring(),
Item('param_distribs_key', label='parameters'),
Spring(),
Item('param_distribs_ref@', show_label=False),
Spring(),
id='mkpo.split.pd',
label='parameter distributions',
dock='tab',
),
HSplit(
Item('po@', show_label=False),
label='Pull Out',
id='mkpo.split.pu',
scrollable=True,
dock='tab',
),
dock='tab',
id='mkpo.split',
orientation='vertical',
),
dock='tab',
id='mkpo',
scrollable=True,
resizable=True,
height=0.4,
width=0.5,
buttons=['OK', 'Cancel'],
)
