def _filter_simulated_ft1(original_ft1, simulated_ft1, ra, dec, radius,
tmin, tmax, emin, emax, outfile):
"""
This accomplish what gtselect and gtmktime would do, but in one single command (much faster). This is possible
again because we are applying GTIs that are already known.
:param original_ft1:
:param simulated_ft1:
:param ra:
:param dec:
:param radius:
:param tmin:
:param tmax:
:param emin:
:param emax:
:param outfile:
:return:
"""
# Now filter
my_filter = 'gtifilter("%s") && ANGSEP(RA, DEC, %s, %s) <= %s ' \
'&& TIME>=%s && TIME<=%s && ENERGY >=%s && ENERGY <=%s' % (original_ft1, ra, dec, radius,
tmin, tmax, emin, emax)
cmd_line = "ftcopy '%s[EVENTS][%s]' %s copyall=yes clobber=yes history=yes" % (
simulated_ft1, my_filter, outfile)
subprocess.check_call(cmd_line, shell=True)
# Now update the DS keywords from the orginal file, so that downstream software will understand
# the file even though we didn't use gtselect nor gtmktime
with pyfits.open(sanitize_filename(original_ft1)) as orig:
with pyfits.open(outfile, mode='update') as new:
# Copy keywords from original file
orig_header = orig['EVENTS'].header
relevant_keywords = filter(
lambda x: x.find("DS") == 0 or x == "NDSKEYS",
orig['EVENTS'].header.keys())
for keyword in relevant_keywords:
new['EVENTS'].header[keyword] = orig_header[keyword]
def gtselect(ra_center, dec_center, radius, tmin, tmax, emin, emax, simulated_ft1, output_ft1):
# NOTE: we assume there is no need for a Zenith cut, because the Zenith cut has been made with
# gtmktime
gtselect = GtApp('gtselect')
gtselect.run(print_command=False,
infile=sanitize_filename(simulated_ft1),
outfile=output_ft1,
ra=ra_center,
dec=dec_center,
rad=radius,
tmin=tmin,
tmax=tmax,
emin=emin,
emax=emax,
zmin=0,
zmax=180, # Zenith cut must be applied with gtmktime
evclass="INDEF", # Assume simulation has been made with the same evclass of the input file
evtype='INDEF')
def gtmktime_from_file(original_ft1, original_ft2, simulated_ft1,
output_ft1):
"""
:param original_ft1:
:param original_ft2:
:param simulated_ft1:
:param output_ft1:
:return:
"""
# Add the GTI extension to the data file
with pyfits.open(sanitize_filename(original_ft1)) as orig:
with pyfits.open(simulated_ft1, mode='update') as new:
# Copy the GTIs from the original file
new['GTI'] = orig['GTI']
# Re-write header info (inaccuracy due to pil conversion float to str)
for ehdu, ghdu in zip(new, orig):
ehdu.header['TSTART'] = ghdu.header['TSTART']
ehdu.header['TSTOP'] = ghdu.header['TSTOP']
# Now run gtmktime which will update the headers and select the events based on the GTIs
gtmktime = GtApp('gtmktime')
gtmktime.run(
print_command=False,
evfile=simulated_ft1,
outfile=output_ft1,
scfile=original_ft2,
filter=
'T', # This filter is always true, which means we are not adding any new filter
roicut='no',
apply_filter='yes' # This will make gtmktime cut on the GTIs
)
description='Find Good Time Intervals with gtmktime')
parser.add_argument("--config",
help="Configuration file",
type=str,
required=True)
parser.add_argument("--gtifile",
help="Name of output GTI file (text format)",
type=str,
required=True)
args = parser.parse_args()
# Read configuration file
config = ConfigParser.SafeConfigParser()
config.read([sanitize_filename(args.config)])
ft1 = sanitize_filename(config.get("data", "ft1"))
ft2 = sanitize_filename(config.get("data", "ft2"))
# Read from the original FT1 the ROI definition
ra_center, dec_center, radius = find_ROI_cut(ft1)
log.info(
"Found ROI in file. Center: (R.A., Dec) = (%s, %s), radius = %s deg" %
(ra_center, dec_center, radius))
assert ra_center == float(config.get("cuts", "ra"))
assert dec_center == float(config.get("cuts", "dec"))
assert radius == float(config.get("cuts", "radius"))
required=True)
parser.add_argument("--met_stop",
help='MET of the stop of the new FT2 file',
type=float,
required=True)
parser.add_argument("--outfile",
help='Output FT2 file',
type=str,
required=True)
args = parser.parse_args()
# Read the FT2 file and find the time interval where the pointing was as close as possible to the
# desired one
all_mission_ft2 = sanitize_filename(args.all_mission_ft2)
with pyfits.open(all_mission_ft2) as f:
# Is this a 30s FT2 file or a 1s FT2 file?
dt_ = f['SC_DATA'].data.field("STOP") - f['SC_DATA'].data.field(
"START")
if np.average(dt_) >= 10.0:
# 30 s FT2 file
dt = 30.0
else:
dt = 1.0
if __name__ == "__main__":
parser = argparse.ArgumentParser(description='one_likelihood')
parser.add_argument("--config", help="Configuration file", type=str, required=True)
parser.add_argument("--outputdir", help="Directory where to store the output results (must exist already)",
required=True, type=str)
parser.add_argument("--tstarts", help="Start time of intervals to analyze", type=str, required=True)
parser.add_argument("--tstops", help="Stop time of intervals to analyze", type=str, required=True)
args = parser.parse_args()
config = ConfigParser.SafeConfigParser()
config.read([sanitize_filename(args.config)])
ra = float(config.get("cuts", "ra"))
dec = float(config.get("cuts", "dec"))
roi = float(config.get("cuts", "radius"))
zmax = float(config.get("cuts", "zmax"))
thetamax = float(config.get("cuts", "thetamax"))
emin = float(config.get("cuts", "emin"))
emax = float(config.get("cuts", "emax"))
irf = config.get("cuts", "irf")
galactic_model = config.get("likelihood", "galactic_model")
particle_model = config.get("likelihood", "particle_model")
tsmin = float(config.get("likelihood", "tsmin"))
strategy = config.get("likelihood", "strategy")
def __init__(self,
original_ft1,
original_ft2,
path_of_tar_file_with_simulated_ft1_files,
workdir="simulated_ft1s"):
# Make absolute path and resolve env. variables (if any)
original_ft1 = sanitize_filename(original_ft1)
original_ft2 = sanitize_filename(
original_ft2
) # This is needed only if we want to switch back to gtmktime
path_of_tar_file_with_simulated_ft1_files = sanitize_filename(
path_of_tar_file_with_simulated_ft1_files)
# Read from the original FT1 the cuts
roi_cuts = pyLike.RoiCuts()
roi_cuts.readCuts(original_ft1)
# ROI definition
ra_center, dec_center, radius = roi_cuts.roiCone()
# Store them as well
self._ra_center = ra_center
self._dec_center = dec_center
self._radius = radius
# Energy minimum and maximum
emin, emax = roi_cuts.getEnergyCuts()
with pyfits.open(original_ft1) as f:
tstart = f['EVENTS'].header['TSTART']
tstop = f['EVENTS'].header['TSTOP']
# Unpack tar file here
with within_directory(workdir, create=True):
# Copy tar here, unpack, then remove copy
log.info("Copying %s to %s..." %
(path_of_tar_file_with_simulated_ft1_files, workdir))
shutil.copy2(path_of_tar_file_with_simulated_ft1_files, ".")
execute_command(
log, "tar xvf %s" % path_of_tar_file_with_simulated_ft1_files)
os.remove(
os.path.basename(path_of_tar_file_with_simulated_ft1_files))
# Now get the names of all ft1s
all_ft1s_raw = glob.glob("gll_ft1_tr_bn*_v00.fit")
log.info(
"Found %s simulated FT1 files in archive %s" %
(len(all_ft1s_raw), path_of_tar_file_with_simulated_ft1_files))
log.info("Filtering them with the same cuts as in %s" %
(original_ft1))
self._all_ft1s = []
# Apply the cuts to them
for i, this_simulated_ft1 in enumerate(all_ft1s_raw):
if (i + 1) % 100 == 0:
log.info("Processed %i of %i" % (i + 1, len(all_ft1s_raw)))
# temp_file1 = "__temp_ft1.fit"
#
# self.gtmktime_from_file(original_ft1, original_ft2, this_simulated_ft1, temp_file1)
#
# temp_file2 = "__temp_ft1_2.fit"
#
# self.gtselect(ra_center, dec_center, radius, tstart, tstop, emin, emax, temp_file1, temp_file2)
#
# os.remove(temp_file1)
#
basename = os.path.splitext(
os.path.basename(this_simulated_ft1))[0]
new_name = "%s_filt.fit" % basename
self._filter_simulated_ft1(original_ft1, this_simulated_ft1,
ra_center, dec_center, radius,
tstart, tstop, emin, emax, new_name)
# os.rename(temp_file2, new_name)
self._all_ft1s.append(sanitize_filename(new_name))
# Remove the simulated FT1 to save space
os.remove(this_simulated_ft1)
if __name__ == "__main__":
parser = argparse.ArgumentParser(description='Create scripts to be sumbitted to the farm')
parser.add_argument("--config", help="Configuration file", type=str, required=True)
parser.add_argument("--gtifile", help="Name of output GTI file (text format)", type=str, required=True)
parser.add_argument("--scriptfile", help="Output script file (a bash script)", type=str, required=True)
# parser.add_argument("--package", help="Path to the data package", type=str, required=True)
parser.add_argument("--outputdir", help="Directory where to store the output results",
required=True, type=str)
parser.add_argument("--n_per_job", help="How many intervals per job", type=int, required=True)
args = parser.parse_args()
config_path = sanitize_filename(args.config)
assert os.path.exists(config_path)
# package_path = sanitize_filename(args.package)
#
# assert os.path.exists(package_path)
outputdir = sanitize_filename(args.outputdir)
if not os.path.exists(outputdir):
os.makedirs(outputdir)
config = ConfigParser.SafeConfigParser()
config.read([config_path])
required=False,
default='GRB',
type=str,
help="Name of target source")
parser.add_argument(
"--outfile",
required=True,
type=str,
help=
"Name for the output file which will contain the numpy array of the TS values "
"measured on the simulations")
args = parser.parse_args()
ft1 = sanitize_filename(args.filtered_ft1)
ft2 = sanitize_filename(args.ft2)
expmap = sanitize_filename(args.expmap)
ltcube = sanitize_filename(args.ltcube)
xml_file = sanitize_filename(args.xmlfile)
path_of_tar_file_with_simulated_ft1_files = sanitize_filename(args.tar)
# This will process the simulations and compute the TSs
sf = SimulationFeeder(ft1,
ft2,
expmap,
ltcube,
xml_file,
path_of_tar_file_with_simulated_ft1_files,
args.tsmap_spec,
