def test_BKExampleOne():
testCases.banner("=== HULL INITIAL EXAMPLE SECTION 28.7 ED 6 PG 668 ====")
times = [0.0, 0.5000, 1.00000, 1.50000, 2.00000, 2.500000, 3.00000]
zeros = [0.03, 0.0343, 0.03824, 0.04183, 0.04512, 0.048512, 0.05086]
times = np.array(times)
zeros = np.array(zeros)
dfs = np.exp(-zeros * times)
startDate = FinDate(1, 12, 2019)
endDate = FinDate(1, 6, 2021)
sigma = 0.25
a = 0.22
numTimeSteps = 3
tmat = (endDate - startDate) / gDaysInYear
model = FinModelRatesBK(sigma, a, numTimeSteps)
model.buildTree(tmat, times, dfs)
# Agrees with Figure 28.10 - Not exact as we have dt not exactly 0.50
if numTimeSteps < 5:
testCases.header("LABEL", "VALUE")
testCases.print("QTREE", model._Q)
testCases.print("RTREE", model._rt)
printTree(model._rt)
testCases.print("PU AT LAST TIME", model._pu)
testCases.print("PDM AT LAST TIME", model._pm)
testCases.print("PD AT LAST TIME", model._pd)
def test_FinBondOptionAmericanConvergenceONE():
# Build discount curve
settlementDate = FinDate(1, 12, 2019)
discountCurve = FinDiscountCurveFlat(settlementDate, 0.05)
# Bond details
maturityDate = FinDate(1, 9, 2025)
issueDate = FinDate(1, 9, 2016)
coupon = 0.05
freqType = FinFrequencyTypes.SEMI_ANNUAL
accrualType = FinDayCountTypes.ACT_ACT_ICMA
bond = FinBond(issueDate, maturityDate, coupon, freqType, accrualType)
# Option Details
expiryDate = FinDate(1, 12, 2020)
strikePrice = 100.0
face = 100.0
testCases.header("TIME", "N", "PUT_AMER", "PUT_EUR", "CALL_AME",
"CALL_EUR")
timeSteps = range(30, 100, 10)
for numTimeSteps in timeSteps:
sigma = 0.20
a = 0.1
start = time.time()
optionType = FinOptionTypes.AMERICAN_PUT
bondOption1 = FinBondOption(bond, expiryDate, strikePrice, face,
optionType)
model1 = FinModelRatesBK(sigma, a, numTimeSteps)
v1put = bondOption1.value(settlementDate, discountCurve, model1)
optionType = FinOptionTypes.EUROPEAN_PUT
bondOption2 = FinBondOption(bond, expiryDate, strikePrice, face,
optionType)
model2 = FinModelRatesBK(sigma, a, numTimeSteps)
v2put = bondOption2.value(settlementDate, discountCurve, model2)
optionType = FinOptionTypes.AMERICAN_CALL
bondOption1 = FinBondOption(bond, expiryDate, strikePrice, face,
optionType)
model1 = FinModelRatesBK(sigma, a, numTimeSteps)
v1call = bondOption1.value(settlementDate, discountCurve, model1)
optionType = FinOptionTypes.EUROPEAN_CALL
bondOption2 = FinBondOption(bond, expiryDate, strikePrice, face,
optionType)
model2 = FinModelRatesBK(sigma, a, numTimeSteps)
v2call = bondOption2.value(settlementDate, discountCurve, model2)
end = time.time()
period = end - start
testCases.print(period, numTimeSteps, v1put, v2put, v1call, v2call)
def test_FinBondEmbeddedOptionMATLAB():
# https://fr.mathworks.com/help/fininst/optembndbybk.html
# I FIND THAT THE PRICE CONVERGES TO 102.365 WHICH IS CLOSE TO 102.382
# FOUND BY MATLAB ALTHOUGH THEY DO NOT EXAMINE THE ASYMPTOTIC PRICE
# WHICH MIGHT BE A BETTER MATCH - ALSO THEY DO NOT USE A REALISTIC VOL
settlementDate = FinDate(1, 1, 2007)
###########################################################################
swapType = FinSwapTypes.PAYER
dcType = FinDayCountTypes.THIRTY_E_360
fixedFreq = FinFrequencyTypes.ANNUAL
swap1 = FinIborSwap(settlementDate, "1Y", swapType, 0.0350, fixedFreq,
dcType)
swap2 = FinIborSwap(settlementDate, "2Y", swapType, 0.0400, fixedFreq,
dcType)
swap3 = FinIborSwap(settlementDate, "3Y", swapType, 0.0450, fixedFreq,
dcType)
swaps = [swap1, swap2, swap3]
discountCurve = FinIborCurve(settlementDate, [], [], swaps)
###########################################################################
issueDate = FinDate(1, 1, 2005)
maturityDate = FinDate(1, 1, 2010)
coupon = 0.0525
frequencyType = FinFrequencyTypes.ANNUAL
accrualType = FinDayCountTypes.ACT_ACT_ICMA
bond = FinBond(issueDate, maturityDate, coupon, frequencyType, accrualType)
callDates = []
callPrices = []
putDates = []
putPrices = []
putDate = FinDate(1, 1, 2008)
for _ in range(0, 24):
putDates.append(putDate)
putPrices.append(100)
putDate = putDate.addMonths(1)
testCases.header("BOND PRICE", "PRICE")
v = bond.cleanPriceFromDiscountCurve(settlementDate, discountCurve)
testCases.print("Bond Pure Price:", v)
sigma = 0.01 # This volatility is very small for a BK process
a = 0.1
puttableBond = FinBondEmbeddedOption(issueDate, maturityDate, coupon,
frequencyType, accrualType, callDates,
callPrices, putDates, putPrices)
testCases.header("TIME", "NumTimeSteps", "BondWithOption", "BondPure")
timeSteps = range(100, 200, 10) # 1000, 10)
values = []
for numTimeSteps in timeSteps:
model = FinModelRatesBK(sigma, a, numTimeSteps)
start = time.time()
v = puttableBond.value(settlementDate, discountCurve, model)
end = time.time()
period = end - start
testCases.print(period, numTimeSteps, v['bondwithoption'],
v['bondpure'])
values.append(v['bondwithoption'])
if plotGraphs:
plt.figure()
plt.plot(timeSteps, values)
def test_FinBondEmbeddedOptionQUANTLIB():
# Based on example at the nice blog on Quantlib at
# http://gouthamanbalaraman.com/blog/callable-bond-quantlib-python.html
# I get a price of 68.97 for 1000 time steps which is higher than the
# 68.38 found in blog article. But this is for 40 grid points.
# Note also that a basis point vol of 0.120 is 12% which is VERY HIGH!
valueDate = FinDate(16, 8, 2016)
settlementDate = valueDate.addWeekDays(3)
###########################################################################
discountCurve = FinDiscountCurveFlat(valueDate, 0.035,
FinFrequencyTypes.SEMI_ANNUAL)
###########################################################################
issueDate = FinDate(15, 9, 2010)
maturityDate = FinDate(15, 9, 2022)
coupon = 0.025
frequencyType = FinFrequencyTypes.QUARTERLY
accrualType = FinDayCountTypes.ACT_ACT_ICMA
bond = FinBond(issueDate, maturityDate, coupon, frequencyType, accrualType)
###########################################################################
# Set up the call and put times and prices
###########################################################################
nextCallDate = FinDate(15, 9, 2016)
callDates = [nextCallDate]
callPrices = [100.0]
for _ in range(1, 24):
nextCallDate = nextCallDate.addMonths(3)
callDates.append(nextCallDate)
callPrices.append(100.0)
putDates = []
putPrices = []
# the value used in blog of 12% bp vol is unrealistic
sigma = 0.12 / 0.035 # basis point volatility
a = 0.03
puttableBond = FinBondEmbeddedOption(issueDate, maturityDate, coupon,
frequencyType, accrualType, callDates,
callPrices, putDates, putPrices)
testCases.header("BOND PRICE", "PRICE")
v = bond.cleanPriceFromDiscountCurve(settlementDate, discountCurve)
testCases.print("Bond Pure Price:", v)
testCases.header("TIME", "NumTimeSteps", "BondWithOption", "BondPure")
timeSteps = range(100, 200, 20) # 1000, 10)
values = []
for numTimeSteps in timeSteps:
model = FinModelRatesBK(sigma, a, numTimeSteps)
start = time.time()
v = puttableBond.value(settlementDate, discountCurve, model)
end = time.time()
period = end - start
testCases.print(period, numTimeSteps, v['bondwithoption'],
v['bondpure'])
values.append(v['bondwithoption'])
if plotGraphs:
plt.figure()
plt.title("Puttable Bond Price Convergence")
plt.plot(timeSteps, values)
def test_BKExampleTwo():
# Valuation of a European option on a coupon bearing bond
# This follows example in Fig 28.11 of John Hull's book but does not
# have the exact same dt so there are some differences
settlementDate = FinDate(1, 12, 2019)
issueDate = FinDate(1, 12, 2018)
expiryDate = settlementDate.addTenor("18m")
maturityDate = settlementDate.addTenor("10Y")
coupon = 0.05
frequencyType = FinFrequencyTypes.SEMI_ANNUAL
accrualType = FinDayCountTypes.ACT_ACT_ICMA
bond = FinBond(issueDate, maturityDate, coupon, frequencyType, accrualType)
couponTimes = []
couponFlows = []
cpn = bond._coupon / bond._frequency
numFlows = len(bond._flowDates)
for i in range(1, numFlows):
pcd = bond._flowDates[i - 1]
ncd = bond._flowDates[i]
if pcd < settlementDate and ncd > settlementDate:
flowTime = (pcd - settlementDate) / gDaysInYear
couponTimes.append(flowTime)
couponFlows.append(cpn)
for flowDate in bond._flowDates:
if flowDate > settlementDate:
flowTime = (flowDate - settlementDate) / gDaysInYear
couponTimes.append(flowTime)
couponFlows.append(cpn)
couponTimes = np.array(couponTimes)
couponFlows = np.array(couponFlows)
strikePrice = 105.0
face = 100.0
tmat = (maturityDate - settlementDate) / gDaysInYear
texp = (expiryDate - settlementDate) / gDaysInYear
times = np.linspace(0, tmat, 11)
dates = settlementDate.addYears(times)
dfs = np.exp(-0.05 * times)
curve = FinDiscountCurve(settlementDate, dates, dfs)
price = bond.cleanPriceFromDiscountCurve(settlementDate, curve)
testCases.header("LABEL", "VALUE")
testCases.print("Fixed Income Price:", price)
sigma = 0.20
a = 0.05
numTimeSteps = 26
model = FinModelRatesBK(sigma, a, numTimeSteps)
model.buildTree(tmat, times, dfs)
exerciseType = FinOptionExerciseTypes.AMERICAN
v = model.bondOption(texp, strikePrice, face, couponTimes, couponFlows,
exerciseType)
# Test convergence
numStepsList = [100, 200, 300, 400, 500, 600, 700, 800, 900, 1000]
exerciseType = FinOptionExerciseTypes.AMERICAN
testCases.header("TIMESTEPS", "VALUE", "TIME")
treeVector = []
for numTimeSteps in numStepsList:
start = time.time()
model = FinModelRatesBK(sigma, a, numTimeSteps)
model.buildTree(tmat, times, dfs)
v = model.bondOption(texp, strikePrice, face, couponTimes, couponFlows,
exerciseType)
end = time.time()
period = end - start
treeVector.append(v)
testCases.print(numTimeSteps, v, period)
# plt.plot(numStepsList, treeVector)
# Value in Hill converges to 0.699 with 100 time steps while I get 0.700
if 1 == 0:
print("RT")
printTree(model._rt, 5)
print("Q")
printTree(model._Q, 5)
def test_FinIborBermudanSwaptionBKModel():
''' Replicate examples in paper by Leif Andersen which can be found at
file:///C:/Users/Dominic/Downloads/SSRN-id155208.pdf '''
valuationDate = FinDate(1, 1, 2011)
settlementDate = valuationDate
exerciseDate = settlementDate.addYears(1)
swapMaturityDate = settlementDate.addYears(4)
swapFixedCoupon = 0.060
swapFixedFrequencyType = FinFrequencyTypes.SEMI_ANNUAL
swapFixedDayCountType = FinDayCountTypes.ACT_365F
liborCurve = FinDiscountCurveFlat(valuationDate,
0.0625,
FinFrequencyTypes.SEMI_ANNUAL)
fwdPAYSwap = FinIborSwap(exerciseDate,
swapMaturityDate,
FinSwapTypes.PAY,
swapFixedCoupon,
swapFixedFrequencyType,
swapFixedDayCountType)
fwdSwapValue = fwdPAYSwap.value(settlementDate, liborCurve, liborCurve)
testCases.header("LABEL", "VALUE")
testCases.print("FWD SWAP VALUE", fwdSwapValue)
# fwdPAYSwap.printFixedLegPV()
# Now we create the European swaptions
fixedLegType = FinSwapTypes.PAY
europeanSwaptionPay = FinIborSwaption(settlementDate,
exerciseDate,
swapMaturityDate,
fixedLegType,
swapFixedCoupon,
swapFixedFrequencyType,
swapFixedDayCountType)
fixedLegType = FinSwapTypes.RECEIVE
europeanSwaptionRec = FinIborSwaption(settlementDate,
exerciseDate,
swapMaturityDate,
fixedLegType,
swapFixedCoupon,
swapFixedFrequencyType,
swapFixedDayCountType)
###########################################################################
###########################################################################
###########################################################################
# BLACK'S MODEL
###########################################################################
###########################################################################
###########################################################################
testCases.banner("======= ZERO VOLATILITY ========")
model = FinModelBlack(0.0000001)
testCases.print("Black Model", model._volatility)
valuePay = europeanSwaptionPay.value(settlementDate, liborCurve, model)
testCases.print("EUROPEAN BLACK PAY VALUE ZERO VOL:", valuePay)
valueRec = europeanSwaptionRec.value(settlementDate, liborCurve, model)
testCases.print("EUROPEAN BLACK REC VALUE ZERO VOL:", valueRec)
payRec = valuePay - valueRec
testCases.print("PAY MINUS RECEIVER :", payRec)
testCases.banner("======= 20%% BLACK VOLATILITY ========")
model = FinModelBlack(0.20)
testCases.print("Black Model", model._volatility)
valuePay = europeanSwaptionPay.value(settlementDate, liborCurve, model)
testCases.print("EUROPEAN BLACK PAY VALUE:", valuePay)
valueRec = europeanSwaptionRec.value(settlementDate, liborCurve, model)
testCases.print("EUROPEAN BLACK REC VALUE:", valueRec)
payRec = valuePay - valueRec
testCases.print("PAY MINUS RECEIVER :", payRec)
###########################################################################
###########################################################################
###########################################################################
# BK MODEL
###########################################################################
###########################################################################
###########################################################################
testCases.banner("=======================================================")
testCases.banner("=======================================================")
testCases.banner("==================== BK MODEL =========================")
testCases.banner("=======================================================")
testCases.banner("=======================================================")
testCases.banner("======= 0% VOLATILITY EUROPEAN SWAPTION BK MODEL ======")
# Used BK with constant short-rate volatility
sigma = 0.00001
a = 0.01
numTimeSteps = 200
model = FinModelRatesBK(sigma, a, numTimeSteps)
valuePay = europeanSwaptionPay.value(valuationDate, liborCurve, model)
testCases.print("EUROPEAN BK PAY VALUE:", valuePay)
valueRec = europeanSwaptionRec.value(valuationDate, liborCurve, model)
testCases.print("EUROPEAN BK REC VALUE:", valueRec)
payRec = valuePay - valueRec
testCases.print("PAY MINUS RECEIVER :", payRec)
testCases.banner("======= 20% VOLATILITY EUROPEAN SWAPTION BK MODEL ========")
# Used BK with constant short-rate volatility
sigma = 0.20
a = 0.01
model = FinModelRatesBK(sigma, a, numTimeSteps)
testCases.banner("BK MODEL SWAPTION CLASS EUROPEAN EXERCISE")
valuePay = europeanSwaptionPay.value(valuationDate, liborCurve, model)
testCases.print("EUROPEAN BK PAY VALUE:", valuePay)
valueRec = europeanSwaptionRec.value(valuationDate, liborCurve, model)
testCases.print("EUROPEAN BK REC VALUE:", valueRec)
payRec = valuePay - valueRec
testCases.print("PAY MINUS RECEIVER :", payRec)
###########################################################################
# Now we create the Bermudan swaptions but only allow European exercise
fixedLegType = FinSwapTypes.PAY
exerciseType = FinExerciseTypes.EUROPEAN
bermudanSwaptionPay = FinIborBermudanSwaption(settlementDate,
exerciseDate,
swapMaturityDate,
fixedLegType,
exerciseType,
swapFixedCoupon,
swapFixedFrequencyType,
swapFixedDayCountType)
fixedLegType = FinSwapTypes.RECEIVE
exerciseType = FinExerciseTypes.EUROPEAN
bermudanSwaptionRec = FinIborBermudanSwaption(settlementDate,
exerciseDate,
swapMaturityDate,
fixedLegType,
exerciseType,
swapFixedCoupon,
swapFixedFrequencyType,
swapFixedDayCountType)
testCases.banner("======= 0% VOLATILITY BERMUDAN SWAPTION EUROPEAN EXERCISE BK MODEL ========")
# Used BK with constant short-rate volatility
sigma = 0.000001
a = 0.01
model = FinModelRatesBK(sigma, a, numTimeSteps)
testCases.banner("BK MODEL BERMUDAN SWAPTION CLASS EUROPEAN EXERCISE")
valuePay = bermudanSwaptionPay.value(valuationDate, liborCurve, model)
testCases.print("BERMUDAN BK PAY VALUE:", valuePay)
valueRec = bermudanSwaptionRec.value(valuationDate, liborCurve, model)
testCases.print("BERMUDAN BK REC VALUE:", valueRec)
payRec = valuePay - valueRec
testCases.print("PAY MINUS RECEIVER :", payRec)
testCases.banner("======= 20% VOLATILITY BERMUDAN SWAPTION EUROPEAN EXERCISE BK MODEL ========")
# Used BK with constant short-rate volatility
sigma = 0.2
a = 0.01
model = FinModelRatesBK(sigma, a, numTimeSteps)
testCases.banner("BK MODEL BERMUDAN SWAPTION CLASS EUROPEAN EXERCISE")
valuePay = bermudanSwaptionPay.value(valuationDate, liborCurve, model)
testCases.print("BERMUDAN BK PAY VALUE:", valuePay)
valueRec = bermudanSwaptionRec.value(valuationDate, liborCurve, model)
testCases.print("BERMUDAN BK REC VALUE:", valueRec)
payRec = valuePay - valueRec
testCases.print("PAY MINUS RECEIVER :", payRec)
###########################################################################
# Now we create the Bermudan swaptions but allow Bermudan exercise
###########################################################################
fixedLegType = FinSwapTypes.PAY
exerciseType = FinExerciseTypes.BERMUDAN
bermudanSwaptionPay = FinIborBermudanSwaption(settlementDate,
exerciseDate,
swapMaturityDate,
fixedLegType,
exerciseType,
swapFixedCoupon,
swapFixedFrequencyType,
swapFixedDayCountType)
fixedLegType = FinSwapTypes.RECEIVE
exerciseType = FinExerciseTypes.BERMUDAN
bermudanSwaptionRec = FinIborBermudanSwaption(settlementDate,
exerciseDate,
swapMaturityDate,
fixedLegType,
exerciseType,
swapFixedCoupon,
swapFixedFrequencyType,
swapFixedDayCountType)
testCases.banner("======= ZERO VOLATILITY BERMUDAN SWAPTION BERMUDAN EXERCISE BK MODEL ========")
# Used BK with constant short-rate volatility
sigma = 0.000001
a = 0.01
model = FinModelRatesBK(sigma, a, numTimeSteps)
testCases.banner("BK MODEL BERMUDAN SWAPTION CLASS BERMUDAN EXERCISE")
valuePay = bermudanSwaptionPay.value(valuationDate, liborCurve, model)
testCases.print("BERMUDAN BK PAY VALUE:", valuePay)
valueRec = bermudanSwaptionRec.value(valuationDate, liborCurve, model)
testCases.print("BERMUDAN BK REC VALUE:", valueRec)
payRec = valuePay - valueRec
testCases.print("PAY MINUS RECEIVER :", payRec)
testCases.banner("======= 20% VOLATILITY BERMUDAN SWAPTION BERMUDAN EXERCISE BK MODEL ========")
# Used BK with constant short-rate volatility
sigma = 0.20
a = 0.01
model = FinModelRatesBK(sigma, a, numTimeSteps)
testCases.banner("BK MODEL BERMUDAN SWAPTION CLASS BERMUDAN EXERCISE")
valuePay = bermudanSwaptionPay.value(valuationDate, liborCurve, model)
testCases.print("BERMUDAN BK PAY VALUE:", valuePay)
valueRec = bermudanSwaptionRec.value(valuationDate, liborCurve, model)
testCases.print("BERMUDAN BK REC VALUE:", valueRec)
payRec = valuePay - valueRec
testCases.print("PAY MINUS RECEIVER :", payRec)
###########################################################################
###########################################################################
###########################################################################
# BDT MODEL
###########################################################################
###########################################################################
###########################################################################
testCases.banner("=======================================================")
testCases.banner("=======================================================")
testCases.banner("======================= BDT MODEL =====================")
testCases.banner("=======================================================")
testCases.banner("=======================================================")
testCases.banner("====== 0% VOLATILITY EUROPEAN SWAPTION BDT MODEL ======")
# Used BK with constant short-rate volatility
sigma = 0.00001
numTimeSteps = 200
model = FinModelRatesBDT(sigma, numTimeSteps)
valuePay = europeanSwaptionPay.value(valuationDate, liborCurve, model)
testCases.print("EUROPEAN BDT PAY VALUE:", valuePay)
valueRec = europeanSwaptionRec.value(valuationDate, liborCurve, model)
testCases.print("EUROPEAN BDT REC VALUE:", valueRec)
payRec = valuePay - valueRec
testCases.print("PAY MINUS RECEIVER :", payRec)
testCases.banner("===== 20% VOLATILITY EUROPEAN SWAPTION BDT MODEL ======")
# Used BK with constant short-rate volatility
sigma = 0.20
a = 0.01
model = FinModelRatesBDT(sigma, numTimeSteps)
testCases.banner("BDT MODEL SWAPTION CLASS EUROPEAN EXERCISE")
valuePay = europeanSwaptionPay.value(valuationDate, liborCurve, model)
testCases.print("EUROPEAN BDT PAY VALUE:", valuePay)
valueRec = europeanSwaptionRec.value(valuationDate, liborCurve, model)
testCases.print("EUROPEAN BDT REC VALUE:", valueRec)
payRec = valuePay - valueRec
testCases.print("PAY MINUS RECEIVER :", payRec)
###########################################################################
# Now we create the Bermudan swaptions but only allow European exercise
fixedLegType = FinSwapTypes.PAY
exerciseType = FinExerciseTypes.EUROPEAN
bermudanSwaptionPay = FinIborBermudanSwaption(settlementDate,
exerciseDate,
swapMaturityDate,
fixedLegType,
exerciseType,
swapFixedCoupon,
swapFixedFrequencyType,
swapFixedDayCountType)
fixedLegType = FinSwapTypes.RECEIVE
bermudanSwaptionRec = FinIborBermudanSwaption(settlementDate,
exerciseDate,
swapMaturityDate,
fixedLegType,
exerciseType,
swapFixedCoupon,
swapFixedFrequencyType,
swapFixedDayCountType)
testCases.banner("======= 0% VOLATILITY BERMUDAN SWAPTION EUROPEAN EXERCISE BDT MODEL ========")
# Used BK with constant short-rate volatility
sigma = 0.000001
model = FinModelRatesBDT(sigma, numTimeSteps)
testCases.banner("BK MODEL BERMUDAN SWAPTION CLASS EUROPEAN EXERCISE")
valuePay = bermudanSwaptionPay.value(valuationDate, liborCurve, model)
testCases.print("BERMUDAN BDT PAY VALUE:", valuePay)
valueRec = bermudanSwaptionRec.value(valuationDate, liborCurve, model)
testCases.print("BERMUDAN BDT REC VALUE:", valueRec)
payRec = valuePay - valueRec
testCases.print("PAY MINUS RECEIVER :", payRec)
testCases.banner("======= 20% VOLATILITY BERMUDAN SWAPTION EUROPEAN EXERCISE BDT MODEL ========")
# Used BK with constant short-rate volatility
sigma = 0.2
model = FinModelRatesBDT(sigma, numTimeSteps)
testCases.banner("BDT MODEL BERMUDAN SWAPTION CLASS EUROPEAN EXERCISE")
valuePay = bermudanSwaptionPay.value(valuationDate, liborCurve, model)
testCases.print("BERMUDAN BDT PAY VALUE:", valuePay)
valueRec = bermudanSwaptionRec.value(valuationDate, liborCurve, model)
testCases.print("BERMUDAN BDT REC VALUE:", valueRec)
payRec = valuePay - valueRec
testCases.print("PAY MINUS RECEIVER :", payRec)
###########################################################################
# Now we create the Bermudan swaptions but allow Bermudan exercise
###########################################################################
fixedLegType = FinSwapTypes.PAY
exerciseType = FinExerciseTypes.BERMUDAN
bermudanSwaptionPay = FinIborBermudanSwaption(settlementDate,
exerciseDate,
swapMaturityDate,
fixedLegType,
exerciseType,
swapFixedCoupon,
swapFixedFrequencyType,
swapFixedDayCountType)
fixedLegType = FinSwapTypes.RECEIVE
bermudanSwaptionRec = FinIborBermudanSwaption(settlementDate,
exerciseDate,
swapMaturityDate,
fixedLegType,
exerciseType,
swapFixedCoupon,
swapFixedFrequencyType,
swapFixedDayCountType)
testCases.banner("======= ZERO VOLATILITY BERMUDAN SWAPTION BERMUDAN EXERCISE BDT MODEL ========")
# Used BK with constant short-rate volatility
sigma = 0.000001
a = 0.01
model = FinModelRatesBDT(sigma, numTimeSteps)
testCases.banner("BK MODEL BERMUDAN SWAPTION CLASS BERMUDAN EXERCISE")
valuePay = bermudanSwaptionPay.value(valuationDate, liborCurve, model)
testCases.print("BERMUDAN BDT PAY VALUE:", valuePay)
valueRec = bermudanSwaptionRec.value(valuationDate, liborCurve, model)
testCases.print("BERMUDAN BDT REC VALUE:", valueRec)
payRec = valuePay - valueRec
testCases.print("PAY MINUS RECEIVER :", payRec)
testCases.banner("======= 20% VOLATILITY BERMUDAN SWAPTION BERMUDAN EXERCISE BDT MODEL ========")
# Used BK with constant short-rate volatility
sigma = 0.20
a = 0.01
model = FinModelRatesBDT(sigma, numTimeSteps)
# print("BDT MODEL BERMUDAN SWAPTION CLASS BERMUDAN EXERCISE")
valuePay = bermudanSwaptionPay.value(valuationDate, liborCurve, model)
testCases.print("BERMUDAN BDT PAY VALUE:", valuePay)
valueRec = bermudanSwaptionRec.value(valuationDate, liborCurve, model)
testCases.print("BERMUDAN BDT REC VALUE:", valueRec)
payRec = valuePay - valueRec
testCases.print("PAY MINUS RECEIVER :", payRec)
###########################################################################
###########################################################################
###########################################################################
# BDT MODEL
###########################################################################
###########################################################################
###########################################################################
testCases.banner("=======================================================")
testCases.banner("=======================================================")
testCases.banner("======================= HW MODEL ======================")
testCases.banner("=======================================================")
testCases.banner("=======================================================")
testCases.banner("====== 0% VOLATILITY EUROPEAN SWAPTION HW MODEL ======")
sigma = 0.0000001
a = 0.1
numTimeSteps = 200
model = FinModelRatesHW(sigma, a, numTimeSteps)
valuePay = europeanSwaptionPay.value(valuationDate, liborCurve, model)
testCases.print("EUROPEAN HW PAY VALUE:", valuePay)
valueRec = europeanSwaptionRec.value(valuationDate, liborCurve, model)
testCases.print("EUROPEAN HW REC VALUE:", valueRec)
payRec = valuePay - valueRec
testCases.print("PAY MINUS RECEIVER :", payRec)
testCases.banner("===== 20% VOLATILITY EUROPEAN SWAPTION BDT MODEL ======")
# Used BK with constant short-rate volatility
sigma = 0.01
a = 0.01
model = FinModelRatesHW(sigma, a, numTimeSteps)
testCases.banner("HW MODEL SWAPTION CLASS EUROPEAN EXERCISE")
valuePay = europeanSwaptionPay.value(valuationDate, liborCurve, model)
testCases.print("EUROPEAN HW PAY VALUE:", valuePay)
valueRec = europeanSwaptionRec.value(valuationDate, liborCurve, model)
testCases.print("EUROPEAN HW REC VALUE:", valueRec)
payRec = valuePay - valueRec
testCases.print("PAY MINUS RECEIVER :", payRec)
###########################################################################
# Now we create the Bermudan swaptions but only allow European exercise
fixedLegType = FinSwapTypes.PAY
exerciseType = FinExerciseTypes.EUROPEAN
bermudanSwaptionPay = FinIborBermudanSwaption(settlementDate,
exerciseDate,
swapMaturityDate,
fixedLegType,
exerciseType,
swapFixedCoupon,
swapFixedFrequencyType,
swapFixedDayCountType)
fixedLegType = FinSwapTypes.RECEIVE
bermudanSwaptionRec = FinIborBermudanSwaption(settlementDate,
exerciseDate,
swapMaturityDate,
fixedLegType,
exerciseType,
swapFixedCoupon,
swapFixedFrequencyType,
swapFixedDayCountType)
testCases.banner("======= 0% VOLATILITY BERMUDAN SWAPTION EUROPEAN EXERCISE HW MODEL ========")
sigma = 0.000001
model = FinModelRatesHW(sigma, a, numTimeSteps)
testCases.banner("BK MODEL BERMUDAN SWAPTION CLASS EUROPEAN EXERCISE")
valuePay = bermudanSwaptionPay.value(valuationDate, liborCurve, model)
testCases.print("BERMUDAN BDT PAY VALUE:", valuePay)
valueRec = bermudanSwaptionRec.value(valuationDate, liborCurve, model)
testCases.print("BERMUDAN BDT REC VALUE:", valueRec)
payRec = valuePay - valueRec
testCases.print("PAY MINUS RECEIVER :", payRec)
testCases.banner("======= 100bp VOLATILITY BERMUDAN SWAPTION EUROPEAN EXERCISE HW MODEL ========")
# Used BK with constant short-rate volatility
sigma = 0.01
model = FinModelRatesHW(sigma, a, numTimeSteps)
testCases.banner("BDT MODEL BERMUDAN SWAPTION CLASS EUROPEAN EXERCISE")
valuePay = bermudanSwaptionPay.value(valuationDate, liborCurve, model)
testCases.print("BERMUDAN BDT PAY VALUE:", valuePay)
valueRec = bermudanSwaptionRec.value(valuationDate, liborCurve, model)
testCases.print("BERMUDAN BDT REC VALUE:", valueRec)
payRec = valuePay - valueRec
testCases.print("PAY MINUS RECEIVER :", payRec)
###########################################################################
# Now we create the Bermudan swaptions but allow Bermudan exercise
###########################################################################
fixedLegType = FinSwapTypes.PAY
exerciseType = FinExerciseTypes.BERMUDAN
bermudanSwaptionPay = FinIborBermudanSwaption(settlementDate,
exerciseDate,
swapMaturityDate,
fixedLegType,
exerciseType,
swapFixedCoupon,
swapFixedFrequencyType,
swapFixedDayCountType)
fixedLegType = FinSwapTypes.RECEIVE
bermudanSwaptionRec = FinIborBermudanSwaption(settlementDate,
exerciseDate,
swapMaturityDate,
fixedLegType,
exerciseType,
swapFixedCoupon,
swapFixedFrequencyType,
swapFixedDayCountType)
testCases.banner("======= ZERO VOLATILITY BERMUDAN SWAPTION BERMUDAN EXERCISE HW MODEL ========")
# Used BK with constant short-rate volatility
sigma = 0.000001
a = 0.01
model = FinModelRatesHW(sigma, a, numTimeSteps)
testCases.banner("HW MODEL BERMUDAN SWAPTION CLASS BERMUDAN EXERCISE")
valuePay = bermudanSwaptionPay.value(valuationDate, liborCurve, model)
testCases.print("BERMUDAN HW PAY VALUE:", valuePay)
valueRec = bermudanSwaptionRec.value(valuationDate, liborCurve, model)
testCases.print("BERMUDAN HW REC VALUE:", valueRec)
payRec = valuePay - valueRec
testCases.print("PAY MINUS RECEIVER :", payRec)
testCases.banner("======= 100bps VOLATILITY BERMUDAN SWAPTION BERMUDAN EXERCISE HW MODEL ========")
# Used BK with constant short-rate volatility
sigma = 0.01
a = 0.01
model = FinModelRatesHW(sigma, a, numTimeSteps)
testCases.banner("HW MODEL BERMUDAN SWAPTION CLASS BERMUDAN EXERCISE")
valuePay = bermudanSwaptionPay.value(valuationDate, liborCurve, model)
testCases.print("BERMUDAN HW PAY VALUE:", valuePay)
valueRec = bermudanSwaptionRec.value(valuationDate, liborCurve, model)
testCases.print("BERMUDAN HW REC VALUE:", valueRec)
payRec = valuePay - valueRec
testCases.print("PAY MINUS RECEIVER :", payRec)
def testFinLiborSwaptionModels():
##########################################################################
# COMPARISON OF MODELS
##########################################################################
valuationDate = FinDate(2011, 1, 1)
liborCurve = test_FinLiborDepositsAndSwaps(valuationDate)
exerciseDate = FinDate(2012, 1, 1)
swapMaturityDate = FinDate(2017, 1, 1)
swapFixedFrequencyType = FinFrequencyTypes.SEMI_ANNUAL
swapFixedDayCountType = FinDayCountTypes.ACT_365F
strikes = np.linspace(0.02, 0.08, 10)
testCases.header("LAB", "STRIKE", "BLK", "BLK_SHFT", "SABR", "SABR_SHFT",
"HW", "BK")
model1 = FinModelBlack(0.00001)
model2 = FinModelBlackShifted(0.00001, 0.0)
model3 = FinModelSABR(0.013, 0.5, 0.5, 0.5)
model4 = FinModelSABRShifted(0.013, 0.5, 0.5, 0.5, -0.008)
model5 = FinModelRatesHW(0.00001, 0.00001)
model6 = FinModelRatesBK(0.01, 0.01)
settlementDate = valuationDate.addWorkDays(2)
for k in strikes:
swaptionType = FinLiborSwapTypes.PAYER
swaption = FinLiborSwaption(settlementDate, exerciseDate,
swapMaturityDate, swaptionType, k,
swapFixedFrequencyType,
swapFixedDayCountType)
swap1 = swaption.value(valuationDate, liborCurve, model1)
swap2 = swaption.value(valuationDate, liborCurve, model2)
swap3 = swaption.value(valuationDate, liborCurve, model3)
swap4 = swaption.value(valuationDate, liborCurve, model4)
swap5 = swaption.value(valuationDate, liborCurve, model5)
swap6 = swaption.value(valuationDate, liborCurve, model6)
testCases.print("PAY", k, swap1, swap2, swap3, swap4, swap5, swap6)
testCases.header("LABEL", "STRIKE", "BLK", "BLK_SHFTD", "SABR",
"SABR_SHFTD", "HW", "BK")
for k in strikes:
swaptionType = FinLiborSwapTypes.RECEIVER
swaption = FinLiborSwaption(settlementDate, exerciseDate,
swapMaturityDate, swaptionType, k,
swapFixedFrequencyType,
swapFixedDayCountType)
swap1 = swaption.value(valuationDate, liborCurve, model1)
swap2 = swaption.value(valuationDate, liborCurve, model2)
swap3 = swaption.value(valuationDate, liborCurve, model3)
swap4 = swaption.value(valuationDate, liborCurve, model4)
swap5 = swaption.value(valuationDate, liborCurve, model5)
swap6 = swaption.value(valuationDate, liborCurve, model6)
testCases.print("REC", k, swap1, swap2, swap3, swap4, swap5, swap6)
def testFinLiborSwaptionMatlabExamples():
# We value a European swaption using Black's model and try to replicate a
# ML example at https://fr.mathworks.com/help/fininst/swaptionbyblk.html
testCases.header("=======================================")
testCases.header("MATLAB EXAMPLE WITH FLAT TERM STRUCTURE")
testCases.header("=======================================")
valuationDate = FinDate(1, 1, 2010)
liborCurve = FinDiscountCurveFlat(valuationDate, 0.06,
FinFrequencyTypes.CONTINUOUS,
FinDayCountTypes.THIRTY_E_360)
settlementDate = FinDate(1, 1, 2011)
exerciseDate = FinDate(1, 1, 2016)
maturityDate = FinDate(1, 1, 2019)
fixedCoupon = 0.062
fixedFrequencyType = FinFrequencyTypes.SEMI_ANNUAL
fixedDayCountType = FinDayCountTypes.THIRTY_E_360_ISDA
notional = 100.0
# Pricing a PAYER
swaptionType = FinLiborSwapTypes.PAYER
swaption = FinLiborSwaption(settlementDate, exerciseDate, maturityDate,
swaptionType, fixedCoupon, fixedFrequencyType,
fixedDayCountType, notional)
model = FinModelBlack(0.20)
v_finpy = swaption.value(valuationDate, liborCurve, model)
v_matlab = 2.071
testCases.header("LABEL", "VALUE")
testCases.print("FP Price:", v_finpy)
testCases.print("MATLAB Prix:", v_matlab)
testCases.print("DIFF:", v_finpy - v_matlab)
###############################################################################
testCases.header("===================================")
testCases.header("MATLAB EXAMPLE WITH TERM STRUCTURE")
testCases.header("===================================")
valuationDate = FinDate(1, 1, 2010)
dates = [
FinDate(1, 1, 2011),
FinDate(1, 1, 2012),
FinDate(1, 1, 2013),
FinDate(1, 1, 2014),
FinDate(1, 1, 2015)
]
zeroRates = [0.03, 0.034, 0.037, 0.039, 0.040]
contFreq = FinFrequencyTypes.CONTINUOUS
interpType = FinInterpTypes.LINEAR_ZERO_RATES
dayCountType = FinDayCountTypes.THIRTY_E_360
liborCurve = FinDiscountCurveZeros(valuationDate, dates, zeroRates,
contFreq, dayCountType, interpType)
settlementDate = FinDate(1, 1, 2011)
exerciseDate = FinDate(1, 1, 2012)
maturityDate = FinDate(1, 1, 2017)
fixedCoupon = 0.03
fixedFrequencyType = FinFrequencyTypes.SEMI_ANNUAL
fixedDayCountType = FinDayCountTypes.THIRTY_E_360
floatFrequencyType = FinFrequencyTypes.SEMI_ANNUAL
floatDayCountType = FinDayCountTypes.THIRTY_E_360
notional = 1000.0
# Pricing a put
swaptionType = FinLiborSwapTypes.RECEIVER
swaption = FinLiborSwaption(settlementDate, exerciseDate, maturityDate,
swaptionType, fixedCoupon, fixedFrequencyType,
fixedDayCountType, notional,
floatFrequencyType, floatDayCountType)
model = FinModelBlack(0.21)
v_finpy = swaption.value(valuationDate, liborCurve, model)
v_matlab = 0.5771
testCases.header("LABEL", "VALUE")
testCases.print("FP Price:", v_finpy)
testCases.print("MATLAB Prix:", v_matlab)
testCases.print("DIFF:", v_finpy - v_matlab)
###############################################################################
testCases.header("===================================")
testCases.header("MATLAB EXAMPLE WITH SHIFTED BLACK")
testCases.header("===================================")
valuationDate = FinDate(1, 1, 2016)
dates = [
FinDate(1, 1, 2017),
FinDate(1, 1, 2018),
FinDate(1, 1, 2019),
FinDate(1, 1, 2020),
FinDate(1, 1, 2021)
]
zeroRates = np.array([-0.02, 0.024, 0.047, 0.090, 0.12]) / 100.0
contFreq = FinFrequencyTypes.ANNUAL
interpType = FinInterpTypes.LINEAR_ZERO_RATES
dayCountType = FinDayCountTypes.THIRTY_E_360
liborCurve = FinDiscountCurveZeros(valuationDate, dates, zeroRates,
contFreq, dayCountType, interpType)
settlementDate = FinDate(1, 1, 2016)
exerciseDate = FinDate(1, 1, 2017)
maturityDate = FinDate(1, 1, 2020)
fixedCoupon = -0.003
fixedFrequencyType = FinFrequencyTypes.SEMI_ANNUAL
fixedDayCountType = FinDayCountTypes.THIRTY_E_360_ISDA
floatFrequencyType = FinFrequencyTypes.SEMI_ANNUAL
floatDayCountType = FinDayCountTypes.THIRTY_E_360_ISDA
notional = 1000.0
# Pricing a PAYER
swaptionType = FinLiborSwapTypes.PAYER
swaption = FinLiborSwaption(settlementDate, exerciseDate, maturityDate,
swaptionType, fixedCoupon, fixedFrequencyType,
fixedDayCountType, notional,
floatFrequencyType, floatDayCountType)
model = FinModelBlackShifted(0.31, 0.008)
v_finpy = swaption.value(valuationDate, liborCurve, model)
v_matlab = 12.8301
testCases.header("LABEL", "VALUE")
testCases.print("FP Price:", v_finpy)
testCases.print("MATLAB Prix:", v_matlab)
testCases.print("DIFF:", v_finpy - v_matlab)
###############################################################################
testCases.header("===================================")
testCases.header("MATLAB EXAMPLE WITH HULL WHITE")
testCases.header("===================================")
# https://fr.mathworks.com/help/fininst/swaptionbyhw.html
valuationDate = FinDate(1, 1, 2007)
dates = [
FinDate(1, 1, 2007),
FinDate(1, 7, 2007),
FinDate(1, 1, 2008),
FinDate(1, 7, 2008),
FinDate(1, 1, 2009),
FinDate(1, 7, 2009),
FinDate(1, 1, 2010),
FinDate(1, 7, 2010),
FinDate(1, 1, 2011),
FinDate(1, 7, 2011),
FinDate(1, 1, 2012)
]
zeroRates = np.array([0.075] * 11)
interpType = FinInterpTypes.FLAT_FORWARDS
dayCountType = FinDayCountTypes.THIRTY_E_360_ISDA
contFreq = FinFrequencyTypes.SEMI_ANNUAL
liborCurve = FinDiscountCurveZeros(valuationDate, dates, zeroRates,
contFreq, dayCountType, interpType)
settlementDate = valuationDate
exerciseDate = FinDate(1, 1, 2010)
maturityDate = FinDate(1, 1, 2012)
fixedCoupon = 0.04
fixedFrequencyType = FinFrequencyTypes.SEMI_ANNUAL
fixedDayCountType = FinDayCountTypes.THIRTY_E_360_ISDA
notional = 100.0
swaptionType = FinLiborSwapTypes.RECEIVER
swaption = FinLiborSwaption(settlementDate, exerciseDate, maturityDate,
swaptionType, fixedCoupon, fixedFrequencyType,
fixedDayCountType, notional)
model = FinModelRatesHW(0.05, 0.01)
v_finpy = swaption.value(valuationDate, liborCurve, model)
v_matlab = 2.9201
testCases.header("LABEL", "VALUE")
testCases.print("FP Price:", v_finpy)
testCases.print("MATLAB Prix:", v_matlab)
testCases.print("DIFF:", v_finpy - v_matlab)
###############################################################################
testCases.header("====================================")
testCases.header("MATLAB EXAMPLE WITH BLACK KARASINSKI")
testCases.header("====================================")
# https://fr.mathworks.com/help/fininst/swaptionbybk.html
valuationDate = FinDate(1, 1, 2007)
dates = [
FinDate(1, 1, 2007),
FinDate(1, 7, 2007),
FinDate(1, 1, 2008),
FinDate(1, 7, 2008),
FinDate(1, 1, 2009),
FinDate(1, 7, 2009),
FinDate(1, 1, 2010),
FinDate(1, 7, 2010),
FinDate(1, 1, 2011),
FinDate(1, 7, 2011),
FinDate(1, 1, 2012)
]
zeroRates = np.array([0.07] * 11)
interpType = FinInterpTypes.FLAT_FORWARDS
dayCountType = FinDayCountTypes.THIRTY_E_360_ISDA
contFreq = FinFrequencyTypes.SEMI_ANNUAL
liborCurve = FinDiscountCurveZeros(valuationDate, dates, zeroRates,
contFreq, dayCountType, interpType)
settlementDate = valuationDate
exerciseDate = FinDate(1, 1, 2011)
maturityDate = FinDate(1, 1, 2012)
fixedFrequencyType = FinFrequencyTypes.SEMI_ANNUAL
fixedDayCountType = FinDayCountTypes.THIRTY_E_360_ISDA
notional = 100.0
model = FinModelRatesBK(0.1, 0.05, 200)
fixedCoupon = 0.07
swaptionType = FinLiborSwapTypes.PAYER
swaption = FinLiborSwaption(settlementDate, exerciseDate, maturityDate,
swaptionType, fixedCoupon, fixedFrequencyType,
fixedDayCountType, notional)
v_finpy = swaption.value(valuationDate, liborCurve, model)
v_matlab = 0.3634
testCases.header("LABEL", "VALUE")
testCases.print("FP Price:", v_finpy)
testCases.print("MATLAB Prix:", v_matlab)
testCases.print("DIFF:", v_finpy - v_matlab)
fixedCoupon = 0.0725
swaptionType = FinLiborSwapTypes.RECEIVER
swaption = FinLiborSwaption(settlementDate, exerciseDate, maturityDate,
swaptionType, fixedCoupon, fixedFrequencyType,
fixedDayCountType, notional)
v_finpy = swaption.value(valuationDate, liborCurve, model)
v_matlab = 0.4798
testCases.header("LABEL", "VALUE")
testCases.print("FP Price:", v_finpy)
testCases.print("MATLAB Prix:", v_matlab)
testCases.print("DIFF:", v_finpy - v_matlab)
###############################################################################
testCases.header("====================================")
testCases.header("MATLAB EXAMPLE WITH BLACK-DERMAN-TOY")
testCases.header("====================================")
# https://fr.mathworks.com/help/fininst/swaptionbybdt.html
valuationDate = FinDate(1, 1, 2007)
dates = [
FinDate(1, 1, 2007),
FinDate(1, 7, 2007),
FinDate(1, 1, 2008),
FinDate(1, 7, 2008),
FinDate(1, 1, 2009),
FinDate(1, 7, 2009),
FinDate(1, 1, 2010),
FinDate(1, 7, 2010),
FinDate(1, 1, 2011),
FinDate(1, 7, 2011),
FinDate(1, 1, 2012)
]
zeroRates = np.array([0.06] * 11)
interpType = FinInterpTypes.FLAT_FORWARDS
dayCountType = FinDayCountTypes.THIRTY_E_360_ISDA
contFreq = FinFrequencyTypes.ANNUAL
liborCurve = FinDiscountCurveZeros(valuationDate, dates, zeroRates,
contFreq, dayCountType, interpType)
settlementDate = valuationDate
exerciseDate = FinDate(1, 1, 2012)
maturityDate = FinDate(1, 1, 2015)
fixedFrequencyType = FinFrequencyTypes.ANNUAL
fixedDayCountType = FinDayCountTypes.THIRTY_E_360_ISDA
notional = 100.0
fixedCoupon = 0.062
swaptionType = FinLiborSwapTypes.PAYER
swaption = FinLiborSwaption(settlementDate, exerciseDate, maturityDate,
swaptionType, fixedCoupon, fixedFrequencyType,
fixedDayCountType, notional)
model = FinModelRatesBDT(0.20, 200)
v_finpy = swaption.value(valuationDate, liborCurve, model)
v_matlab = 2.0592
testCases.header("LABEL", "VALUE")
testCases.print("FP Price:", v_finpy)
testCases.print("MATLAB Prix:", v_matlab)
testCases.print("DIFF:", v_finpy - v_matlab)
def test_FinBondOptionZEROVOLConvergence():
# Build discount curve
settlementDate = FinDate(1, 9, 2019)
rate = 0.05
discountCurve = FinDiscountCurveFlat(settlementDate, rate, FinFrequencyTypes.ANNUAL)
# Bond details
issueDate = FinDate(1, 9, 2014)
maturityDate = FinDate(1, 9, 2025)
coupon = 0.06
frequencyType = FinFrequencyTypes.ANNUAL
accrualType = FinDayCountTypes.ACT_ACT_ICMA
bond = FinBond(issueDate, maturityDate, coupon, frequencyType, accrualType)
# Option Details
expiryDate = FinDate(1, 12, 2021)
face = 100.0
dfExpiry = discountCurve.df(expiryDate)
fwdCleanValue = bond.cleanPriceFromDiscountCurve(expiryDate, discountCurve)
fwdFullValue = bond.fullPriceFromDiscountCurve(expiryDate, discountCurve)
print("BOND FwdCleanBondPx", fwdCleanValue)
print("BOND FwdFullBondPx", fwdFullValue)
print("BOND Accrued:", bond._accruedInterest)
spotCleanValue = bond.cleanPriceFromDiscountCurve(settlementDate, discountCurve)
testCases.header("STRIKE", "STEPS",
"CALL_INT", "CALL_INT_PV", "CALL_EUR", "CALL_AMER",
"PUT_INT", "PUT_INT_PV", "PUT_EUR", "PUT_AMER")
numTimeSteps = range(50, 1000, 50)
strikePrices = [90, 100, 110, 120]
for strikePrice in strikePrices:
callIntrinsic = max(spotCleanValue - strikePrice, 0)
putIntrinsic = max(strikePrice - spotCleanValue, 0)
callIntrinsicPV = max(fwdCleanValue - strikePrice, 0) * dfExpiry
putIntrinsicPV = max(strikePrice - fwdCleanValue, 0) * dfExpiry
for numSteps in numTimeSteps:
sigma = 0.0000001
a = 0.1
model = FinModelRatesBK(sigma, a, numSteps)
optionType = FinOptionTypes.EUROPEAN_CALL
bondOption1 = FinBondOption(bond, expiryDate, strikePrice, face, optionType)
v1 = bondOption1.value(settlementDate, discountCurve, model)
optionType = FinOptionTypes.AMERICAN_CALL
bondOption2 = FinBondOption(bond, expiryDate, strikePrice, face, optionType)
v2 = bondOption2.value(settlementDate, discountCurve, model)
optionType = FinOptionTypes.EUROPEAN_PUT
bondOption3 = FinBondOption(bond, expiryDate, strikePrice, face, optionType)
v3 = bondOption3.value(settlementDate, discountCurve, model)
optionType = FinOptionTypes.AMERICAN_PUT
bondOption4 = FinBondOption(bond, expiryDate, strikePrice, face, optionType)
v4 = bondOption4.value(settlementDate, discountCurve, model)
testCases.print(strikePrice, numSteps,
callIntrinsic, callIntrinsicPV, v1, v2,
putIntrinsic, putIntrinsicPV, v3, v4)
def test_FinBondOption():
settlementDate = FinDate(1, 12, 2019)
issueDate = FinDate(1, 12, 2018)
maturityDate = settlementDate.addTenor("10Y")
coupon = 0.05
frequencyType = FinFrequencyTypes.SEMI_ANNUAL
accrualType = FinDayCountTypes.ACT_ACT_ICMA
bond = FinBond(issueDate, maturityDate, coupon, frequencyType, accrualType)
tmat = (maturityDate - settlementDate) / gDaysInYear
times = np.linspace(0, tmat, 20)
dates = settlementDate.addYears(times)
dfs = np.exp(-0.05*times)
discountCurve = FinDiscountCurve(settlementDate, dates, dfs)
expiryDate = settlementDate.addTenor("18m")
strikePrice = 105.0
face = 100.0
###########################################################################
strikes = [80, 85, 90, 95, 100, 105, 110, 115, 120]
optionType = FinOptionTypes.EUROPEAN_CALL
testCases.header("LABEL", "VALUE")
price = bond.fullPriceFromDiscountCurve(settlementDate, discountCurve)
testCases.print("Fixed Income Price:", price)
numTimeSteps = 20
testCases.header("OPTION TYPE AND MODEL", "STRIKE", "VALUE")
for strikePrice in strikes:
sigma = 0.20
a = 0.1
bondOption = FinBondOption(bond, expiryDate, strikePrice, face, optionType)
model = FinModelRatesBK(sigma, a, numTimeSteps)
v = bondOption.value(settlementDate, discountCurve, model)
testCases.print("EUROPEAN CALL - BK", strikePrice, v)
for strikePrice in strikes:
sigma = 0.20
a = 0.05
bondOption = FinBondOption(bond, expiryDate, strikePrice, face, optionType)
model = FinModelRatesBK(sigma, a, numTimeSteps)
v = bondOption.value(settlementDate, discountCurve, model)
testCases.print("EUROPEAN CALL - BK", strikePrice, v)
###########################################################################
optionType = FinOptionTypes.AMERICAN_CALL
price = bond.fullPriceFromDiscountCurve(settlementDate, discountCurve)
testCases.header("LABEL", "VALUE")
testCases.print("Fixed Income Price:", price)
testCases.header("OPTION TYPE AND MODEL", "STRIKE", "VALUE")
for strikePrice in strikes:
sigma = 0.01
a = 0.1
bondOption = FinBondOption(bond, expiryDate, strikePrice, face, optionType)
model = FinModelRatesBK(sigma, a)
v = bondOption.value(settlementDate, discountCurve, model)
testCases.print("AMERICAN CALL - BK", strikePrice, v)
for strikePrice in strikes:
sigma = 0.20
a = 0.05
bondOption = FinBondOption(bond, expiryDate, strikePrice, face, optionType)
model = FinModelRatesBK(sigma, a)
v = bondOption.value(settlementDate, discountCurve, model)
testCases.print("AMERICAN CALL - BK", strikePrice, v)
###########################################################################
optionType = FinOptionTypes.EUROPEAN_PUT
price = bond.fullPriceFromDiscountCurve(settlementDate, discountCurve)
for strikePrice in strikes:
sigma = 0.01
a = 0.1
bondOption = FinBondOption(bond, expiryDate, strikePrice, face, optionType)
model = FinModelRatesBK(sigma, a)
v = bondOption.value(settlementDate, discountCurve, model)
testCases.print("EUROPEAN PUT - BK", strikePrice, v)
for strikePrice in strikes:
sigma = 0.20
a = 0.05
bondOption = FinBondOption(bond, expiryDate, strikePrice, face, optionType)
model = FinModelRatesBK(sigma, a)
v = bondOption.value(settlementDate, discountCurve, model)
testCases.print("EUROPEAN PUT - BK", strikePrice, v)
###########################################################################
optionType = FinOptionTypes.AMERICAN_PUT
price = bond.fullPriceFromDiscountCurve(settlementDate, discountCurve)
for strikePrice in strikes:
sigma = 0.02
a = 0.1
bondOption = FinBondOption(bond, expiryDate, strikePrice, face, optionType)
model = FinModelRatesBK(sigma, a)
v = bondOption.value(settlementDate, discountCurve, model)
testCases.print("AMERICAN PUT - BK", strikePrice, v)
for strikePrice in strikes:
sigma = 0.20
a = 0.05
bondOption = FinBondOption(bond, expiryDate, strikePrice, face, optionType)
model = FinModelRatesBK(sigma, a)
v = bondOption.value(settlementDate, discountCurve, model)
testCases.print("AMERICAN PUT - BK", strikePrice, v)
def test_FinBondOptionAmericanConvergenceTWO():
# Build discount curve
settlementDate = FinDate(1, 12, 2019)
discountCurve = FinDiscountCurveFlat(settlementDate,
0.05,
FinFrequencyTypes.CONTINUOUS)
# Bond details
issueDate = FinDate(1, 9, 2014)
maturityDate = FinDate(1, 9, 2025)
coupon = 0.05
frequencyType = FinFrequencyTypes.ANNUAL
accrualType = FinDayCountTypes.ACT_ACT_ICMA
bond = FinBond(issueDate, maturityDate, coupon, frequencyType, accrualType)
expiryDate = settlementDate.addTenor("18m")
face = 100.0
spotValue = bond.fullPriceFromDiscountCurve(settlementDate, discountCurve)
testCases.header("LABEL", "VALUE")
testCases.print("BOND PRICE", spotValue)
testCases.header("PERIOD", "N", "EUR_CALL", "AMER_CALL",
"EUR_PUT", "AMER_PUT")
sigma = 0.2
a = 0.1
bkModel = FinModelRatesBK(sigma, a)
K = 101.0
vec_ec = []
vec_ac = []
vec_ep = []
vec_ap = []
if 1 == 1:
K = 100.0
bkModel = FinModelRatesBK(sigma, a, 100)
europeanCallBondOption = FinBondOption(bond, expiryDate, K, face,
FinOptionTypes.EUROPEAN_CALL)
v_ec = europeanCallBondOption.value(settlementDate, discountCurve,
bkModel)
testCases.header("LABEL", "VALUE")
testCases.print("OPTION", v_ec)
numStepsVector = range(100, 100, 1) # should be 100-400
for numSteps in numStepsVector:
bkModel = FinModelRatesBK(sigma, a, numSteps)
start = time.time()
europeanCallBondOption = FinBondOption(bond, expiryDate, K, face,
FinOptionTypes.EUROPEAN_CALL)
v_ec = europeanCallBondOption.value(settlementDate, discountCurve,
bkModel)
americanCallBondOption = FinBondOption(bond, expiryDate, K, face,
FinOptionTypes.AMERICAN_CALL)
v_ac = americanCallBondOption.value(settlementDate, discountCurve,
bkModel)
europeanPutBondOption = FinBondOption(bond, expiryDate, K, face,
FinOptionTypes.EUROPEAN_PUT)
v_ep = europeanPutBondOption.value(settlementDate, discountCurve,
bkModel)
americanPutBondOption = FinBondOption(bond, expiryDate, K, face,
FinOptionTypes.AMERICAN_PUT)
v_ap = americanPutBondOption.value(settlementDate, discountCurve,
bkModel)
end = time.time()
period = end - start
testCases.print(period, numSteps, v_ec, v_ac, v_ep, v_ap)
vec_ec.append(v_ec)
vec_ac.append(v_ac)
vec_ep.append(v_ep)
vec_ap.append(v_ap)
if plotGraphs:
plt.figure()
plt.plot(numStepsVector, vec_ec, label="European Call")
plt.legend()
plt.figure()
plt.plot(numStepsVector, vec_ac, label="American Call")
plt.legend()
plt.figure()
plt.plot(numStepsVector, vec_ep, label="European Put")
plt.legend()
plt.figure()
plt.plot(numStepsVector, vec_ap, label="American Put")
plt.legend()
