Esempio n. 1
0
    def update(self):
        self.all_sprites.update(self.tela)
        self.camera.update(self.jogador) 


        if pygame.time.get_ticks() - self.ultimo_hit > 3000:
            self.imunidade=False
        
        if self.imunidade==False:
            hitou=pygame.sprite.spritecollide(self.jogador,self.inimigos,False,colidiu_func)
            for hit in hitou:
                som_dano.play()
                hit.velocidade=vector(0,0)
                self.jogador.vidas=self.jogador.vidas-1  
                self.ultimo_hit=pygame.time.get_ticks()
                self.imunidade=True
                
                if self.jogador.vidas<= 0:
                    som_morte.play()
                    highscore[NOME] = self.score
                    firebase.patch('/Estoque',highscore)
                    self.score = 0 
                    self.gameover=True
                    pygame.mixer.music.load("GameOver.mp3")
                    pygame.mixer.music.play(-1) 
            
        hitou=pygame.sprite.groupcollide(self.inimigos,self.tiros,False,True)
        for hit in hitou:
            hit.vida=hit.vida-dano_tiro  
            hit.velocidade=vector(0,0)
Esempio n. 2
0
def send_alarm(src):
    config = {
        "apiKey": "AAAAXDKjDeY:APA91bHLONjob43L-tynyMAicqee38C9yuAo6rZFdlc25zmCmmnqyrcyG7NIugNLECKIU2q4QpyNPTzN0NsJHTm8SyiuzJOxzL5JPmHwIoJO7LrYDboUJU0-115EXKWpK8vLVJor1-Pi",
        "authDomain": "homeattender.firebaseapp.com",
        "databaseURL": "https://homeattender.firebaseio.com/",
        "storageBucket": "homeattender.appspot.com"
    }
    #base firebase setup
    firebase = firebase.FirebaseApplication('https://homeattender.firebaseio.com/', None)
    push_service = FCMNotification(api_key=config["apiKey"])
    registration_id = "cp5OKaH4C_Y:APA91bEtcHMcJINecS8SpGYMckeO_Jj9HYwyrQXs4jGBObxgrT8yGCYmdh0JHVE4VP0Q0MmlGxH-OOC6ixT9pFNkqfivOke-nTXanJnhbyVkVBK28bT7KMhSH_Mun3SuWRj14xH58e0V3ZAJLpsFFds8BwFjbyXbnQ"
    #picture pyrebase setup to send from rasp to phone
    pyrebase = pyrebase.initialize_app(config)
    storage = pyrebase.storage()

    #PUSH
    file_sorce = sprintf(image_name, "/home/pi/lip/LeotonModule/fire_%.4d.jpg", src);
    picture_name = "fire{}.png".format(time.strftime("%Y%m%d-%H%M%S"))
    storage.child(picture_name).put(src)
    time=""
    msg = "Fire detected!".time
    firebase.patch('/FireAlarm', {'Info': msg, 'PicName': picture_name})
    
    #NOTIFICATION
    message_title = "FIRE"
    message_body = "FIRE HAS BEEN DETECTED"
    firebase.patch('/', {'Alert': 'off'})
    push_service.notify_single_device(registration_id=self.registration_id, message_title=message_title,
                                                   message_body=message_body)
    return '0'
Esempio n. 3
0
def setPompaAirNyala():
    print "pompa nyala"
    firebase.patch('/sensor/relay', {"status": True})
    GPIO.setup(GPIO_RELAY, GPIO.OUT)  # GPIO Assign mode
    GPIO.setup(GPIO_RELAY1, GPIO.OUT)  # GPIO Assign mode
    GPIO.output(GPIO_RELAY, GPIO.LOW)  # nyala
    GPIO.output(GPIO_RELAY1, GPIO.LOW)  # nyala
Esempio n. 4
0
    def GameOver(self):
        self.tela.fill((0,0,0)) 
        self.text=fonte_titulo.render("Game Over", 1, (250,0,0))
        self.tela.blit(self.text,(80,100))
        
        self.text_1=fonte_texto.render("O seu SCORE foi de {0}".format(self.placar), 1, (250,250,250))
        self.tela.blit(self.text_1,(150,250))        
        self.text_2=fonte_texto.render("Para voltar ao menu aperte M", 1, (250,250,250))
        self.tela.blit(self.text_2,(150,300))
        self.text_3=fonte_texto.render("Para jogar novamente aperte R", 1, (250,250,250))
        self.tela.blit(self.text_3,(150,330))         
                
        key = pygame.key.get_pressed()
        if key[pygame.K_m]:
            menu.menu()
        if key[pygame.K_r]: 
            jogo = loopPrincipal()
            jogo.dar_load()
            jogo.roda()
        firebase.patch('/Estoque',highscore)             
        
#Função chamada pelo menu para iniciar o jogo
#def start():

#jogo = loopPrincipal()

#while True:
#    jogo.dar_load()
#    jogo.roda()
#--------------------------------------------------------------------------------------------------------------------
#firebase.patch('/Estoque',highscore) #colocar quando morrer
Esempio n. 5
0
def answerStickAdd(**param):
    event = param['event']
    tokens = param['tokens']
    alias = tokens[0]
    packageId = tokens[1]
    stickerId = tokens[2]

    newStickerInfo = {'packageId': packageId, 'stickerId': stickerId}

    # 기존 스티커 리스트를 가져와서
    aliasInfo = firebase.get('/customSticker', alias)

    # 이전에 저장된 값이 없다면 리스트로 만들어 초기화
    if aliasInfo is None:
        stickerList = [newStickerInfo]
        aliasInfo = {"list": stickerList}
    else:
        stickerList = aliasInfo.get('list')
        if not validateStickAdd(stickerList, newStickerInfo, event):
            return

        # 현재 없는 새로운 스티커라면 등록
        stickerList.append(newStickerInfo)
        aliasInfo = {"list": stickerList}

    # save custom sticker in firebase. use patch and add last slash to remove unique number
    firebase.patch('/customSticker/' + alias + '/', aliasInfo)
    printTextMessage(event, 'Stiker ' + alias + 'Juga disimpan dalam !!!')
def process_product(command):
    คำสั่ง = command
    if คำสั่ง == "":
        
        ชื่อสินค้า = input("กรุณาระบุชื่อสินค้า  ")
        ราคาสินค้า = int(input("กรุณาระบุราคาสินค้า  "))
        จำนวนที่เหลืออยู่ของสินค้า = int(input("กรุณาระบุจำนวนที่เหลืออยู่ของสินค้า  "))
        # จำนวนที่ขายไปแล้วของสินค้า = int(input("กรุณาระบุจำนวนที่ขายไปแล้วของสินค้า  "))

        สินค้า = {
                    "ชื่อ":ชื่อสินค้า,
                    "ราคา":ราคาสินค้า,
                    "จำนวนที่เหลืออยู่":จำนวนที่เหลืออยู่ของสินค้า,
                    # "จำนวนที่ขายไปแล้ว":จำนวนที่ขายไปแล้วของสินค้า
                }
        
        #save to firebase
        firebase.patch(DATABASE_PRODUCT+"/"+ชื่อสินค้า,สินค้า)
        
        return สินค้า
            
    elif คำสั่ง.lower().strip(" ") == "all":
        all_products = firebase.get(DATABASE_PRODUCT,None)
        print(all_products)
        return True
        # None == False
    else:
        print("ท่านได้ออกจากคำสั่งเรียบร้อย ขอขอบพระคุณที่ใช้บริการ")
        return False
Esempio n. 7
0
def update_relay():
    result = firebase.get('/sensor/relay', 'status')
    result1 = firebase.get('/sensor/dht', 'temp')
    print result1
    if result == True:
        GPIO_RELAY = 18
        GPIO.setup(GPIO_RELAY, GPIO.OUT)  # GPIO Assign mode
        GPIO.output(GPIO_RELAY, GPIO.LOW)  # out
        GPIO.output(GPIO_RELAY, GPIO.LOW)
        print('Relay Nyala')
    # print('result1')
    if result == False:
        GPIO_RELAY = 18
        GPIO.setup(GPIO_RELAY, GPIO.OUT)  # GPIO Assign mode
        GPIO.output(GPIO_RELAY, GPIO.HIGH)  # out
        GPIO.output(GPIO_RELAY, GPIO.HIGH)
        print('Relay Mati')
    if result1 < 30:
        GPIO_RELAY = 18
        GPIO.setup(GPIO_RELAY, GPIO.OUT)  # GPIO Assign mode
        GPIO.output(GPIO_RELAY, GPIO.HIGH)  # out
        GPIO.output(GPIO_RELAY, GPIO.HIGH)
        firebase.patch('/sensor/relay', {"status": False})
        print('Suhu Normal')
    if result1 > 29:
        print('Suhu Panas kipas blower menyala!!')
        GPIO_RELAY = 18
        GPIO.setup(GPIO_RELAY, GPIO.OUT)  # GPIO Assign mode
        GPIO.output(GPIO_RELAY, GPIO.LOW)  # out
        GPIO.output(GPIO_RELAY, GPIO.LOW)
        firebase.patch('/sensor/relay', {"status": True})
Esempio n. 8
0
def main():
    url = 'http://data.ntpc.gov.tw/od/data/api/28AB4122-60E1-4065-98E5-ABCCB69AACA6?$format=json'

    response = requests.get(url)
    response.encoding = 'UTF-8'
    items = response.json()

    # STG
    firebase.delete(stgTable, None)

    print('count = ' + str(len(items)))

    for item in items:
        addr = item['location']
        g = geocoder.google(addr)

        if g.ok:
            data = {'lineid': item['lineid'], 'car': item['car'], 'address': addr,
                    'time': item['time'], 'lat': g.lat, 'lng': g.lng}
            result = firebase.post(stgTable, data)
        else:
            print(g.json)
        time.sleep(0.5)

    # Copy to PROD
    print('Copy to PROD')
    firebase.delete('/PROD', None)
    stgResults = firebase.get(stgTable, None)
    firebase.patch('/PROD', stgResults)
    print('Done')
Esempio n. 9
0
def servoControl():
    LAP=1
    while True:
        ciclo=0
        start=firebase.get('Remote/STAR_STOP',None)
        while (start=="1"):
            start=firebase.get('Remote/STAR_STOP',None)
            Direction= firebase.get('Remote/IZQ_DER',None)
            print(Direction)
            Sequence= firebase.get('Remote/MAN_AUT',None)
            print('Secuencia: '+ Sequence)
            if (Sequence== '1'):
                if(LAP==1):
                    for posicion in range(1,11,1):
                        if (Sequence=='1'and start=='1'):
                            Sequence= firebase.get('Remote/MAN_AUT',None)
                            start=firebase.get('Remote/STAR_STOP',None)
                            print('SecuenciaP: '+ Sequence)
                            ciclo=posicion
                            SerCam.ChangeDutyCycle(ciclo)
                            print('posicion:'+str(ciclo))    #Enviamos un pulso del 4.5% para girar el servo hacia la izquierda
                            sleep(3)           #pausa de medio segundo
                            if(posicion==10):
                                LAP=2
                        else:
                            posicion=20
            #Detenemos el servo
                elif(LAP==2):
                    for posicion in range(11,0,-1):
                        if (Sequence=='1'and start=='1'):
                            Sequence= firebase.get('Remote/MAN_AUT',None)
                            start=firebase.get('Remote/STAR_STOP',None)
                            print('Secuenciavuelta: '+ Sequence)
                            ciclo=posicion
                            SerCam.ChangeDutyCycle(ciclo)
                            print('posicion:'+str(ciclo))    #Enviamos un pulso del 4.5% para girar el servo hacia la izquierda
                            sleep(3)           #pausa de medio segundo
                            if(posicion==10):
                                LAP=1
                    else:
                        posicion=20
                        
            elif (Sequence=='0'):
                SerCam.ChangeDutyCycle(0)
                if(Direction=='0'):
                    ciclo=ciclo+1
                    if (ciclo>10):
                        ciclo=10
                    SerCam.ChangeDutyCycle(ciclo)
                    dato={'IZQ_DER': '2'}
                    firebase.patch('Remote',dato)
                    Direction='2'
                elif(Direction =='1') :
                    ciclo=ciclo-1
                    if(ciclo<0):
                        ciclo=0
                    SerCam.ChangeDutyCycle(ciclo)
                    dato={'IZQ_DER': '2'}
                    firebase.patch('Remote',dato)
                    Direction='2'
Esempio n. 10
0
def upDownControl():
    while True:
        i=0
        ciclo_2=0
        SerCam_2.ChangeDutyCycle(0)
        start=firebase.get('Remote/STAR_STOP',None)
        while (start=="1"):
            start=firebase.get('Remote/STAR_STOP',None)
            
            UpDown= firebase.get('Remote/UP_DOW',None)
            if(UpDown=='1'):
                ciclo_2=ciclo_2 + 1
                if (ciclo_2>4):
                    ciclo_2=4
                SerCam_2.ChangeDutyCycle(ciclo_2)
                print("Up_DOWN:"+str(ciclo_2))
                dato_2={'UP_DOW': '2'}
                firebase.patch('Remote',dato_2)
                UpDown='2'
            elif(UpDown=='0') :
                ciclo_2=ciclo_2 - 1
                if(ciclo_2<0):
                    ciclo_2=0
                SerCam_2.ChangeDutyCycle(ciclo_2)
                print("Up_DOWN:"+str(ciclo_2))
                dato_2={'UP_DOW': '2'}
                firebase.patch('Remote',dato_2)
                UpDown='2'
Esempio n. 11
0
def check_MBTI():
    init()

    mbti = firebase.get('/User/' + Uid + '/MBTI', None)

    input_mbti = req['action']['detailParams']['mbti']['value']

    if 'mbti_1' not in context_list:
        input_mbti = mbti + input_mbti

    firebase.patch('/User/' + Uid, {'MBTI': input_mbti})

    if 'mbti_4' in context_list:
        mbti = firebase.get('/User/' + Uid + '/MBTI', None)

        comment = makeSimpleText(
            user + '님의 ' +
            firebase.get('/UI/mbti/' + mbti + '/description', None))
        career = makeSimpleText('추천직업으로는 ' +
                                firebase.get('/UI/mbti/' + mbti +
                                             '/career', None) + '가 있어요')
        qes = makeSimpleText("성격유형별 대표직업을 확인했습니다. 그중 마음에 드는 직업을 선택하셨나요??")

        reply = firebase.get("/UI/result_branch/reply", None)
        del reply[2]

        return SendReply([comment, career, qes], reply)

    return SendMessage([makeSimpleText('')])
Esempio n. 12
0
def getDateTime(service, user_id, msg_id, alert):
    try:
        message = service.users().messages().get(
            userId=user_id, id=msg_id, format='minimal').execute()

        # Splits the content of the message to the needed components and assigns it to a TUalert object
        temp = message['snippet'].split('Date:')[1].split('at')
        alert.date = temp[0]
        alert.time = temp[1].split('Subject:')[0]

        # Data struct that we pass into the database (Need to find a better way to handle this)
        data = {
            'Date': alert.date,
            'Time': alert.time,
            'Crime': alert.crime,
            'AlertType': alert.alert,
            'Location': alert.location,
            'Id': alert.id,
            'Description': alert.description,
            'Longitude': alert.long,
            'Latitude': alert.lat
        }

       # Puts the TUalert into the database
        firebase.patch('Alerts/' + str(alert.id) + '/', data)
        return alert

    except errors.HttpError, error:
        print('An error occurred: %s' % error)
Esempio n. 13
0
def cadastro():
    error = None
    print(request.form)
    if request.method == 'POST':
        username = request.form['username1']
        senha = request.form['password1']

        novo_login = {
            username: {
                'id': len(logins),
                'senha': senha,
            },
        }
        erroo = False
        if username in arquivo_firebase['login']:
            error = 'Este nome de usuário já existe.'
            erroo = True
        if len(senha) < 5:
            error = 'A sua senha deve ter no mínimo 5 caracteres'
            erroo = True
        if not erroo:

            logins.append(novo_login)
            print(logins)
            arquivo_firebase['login'] = logins
            firebase.patch('https://projetofinal-dessoft.firebaseio.com/',
                           arquivo_firebase)
            redirect(url_for('mensagem'))

    return render_template('cadastro.html', error=error)
Esempio n. 14
0
def update_firebase():
    data1 = arduino.readline()
    print "Sensor Nutrisi TDS:", data1
    sleep(0)
    data2 = arduino.readline()
    print "Sensor PH", data2
    sleep(0)
    data3 = arduino.readline()
    print "Sensor Cahaya PhotoDioda:", data3
    sleep(0)
    humidity, temperature = Adafruit_DHT.read_retry(sensor, pin)
    print "Suhu :", temperature
    sleep(0)
    print "Kelembapan:", humidity
    sleep(3)

    # regex data dari readline
    nilaiTds = re.findall(r',?([^,]+)(?:,|\r\n)', data1)
    nilaiPH = re.findall(r',?([^,]+)(?:,|\r\n)', data2)
    nilaiCahaya = re.findall(r',?([^,]+)(?:,|\r\n)', data3)

    # convert ke int dan float
    nilai1 = float(nilaiTds[0])
    nilai2 = float(nilaiPH[0])
    nilai3 = float(nilaiCahaya[0])

    data = {
        "tds/value": nilai1,
        "ph/value": nilai2,
        "photoDioda/value/": nilai3,
        "dht/humidity": humidity,
        "dht/temp": temperature
    }
    firebase.patch('/sensor/', data)
Esempio n. 15
0
def answerStickerRemoveCarousel(**param):
    event = param['event']
    tokens = param['tokens']
    alias = tokens[0]
    packageId = tokens[1]
    stickerId = tokens[2]

    newStickerInfo = {'packageId': packageId, 'stickerId': stickerId}

    # 기존 스티커 리스트를 가져와서
    aliasInfo = firebase.get('/customSticker', alias)
    stickerList = aliasInfo.get('list')
    targetIdx = hasStickerInfo(aliasInfo, newStickerInfo)

    # targetIdx 가 -1 이면 리턴(삭제할 대상이 없음)
    if targetIdx == -1:
        printTextMessage(event, 'Aku dibersihkan eoptto!')
        return

    stickerList.pop(targetIdx)
    aliasInfo = {"list": stickerList}

    # save custom sticker in firebase. use patch and add last slash to remove unique number
    firebase.patch('/customSticker/' + alias + '/', aliasInfo)
    printTextMessage(event, 'Stiker ' + alias + 'Geo di jyeotto..')
def updateo(request):
    global x
    global a
    global id
    global dictimes
    dictimes = []
    a[0] = request.GET['id1']
    if (firebase.get('/' + str(request.GET['id1']), 'id') != None):
        if (firebase.get('/' + str(request.GET['id1']),
                         'pass') == request.GET['pass1']):
            x = int(request.GET['slot'])
            reg_id = request.GET['id1']
            s = "/" + str(reg_id)
            id = s
            print(s, "is id here")
            firebase.patch(s, {'slot': x})
            tb = firebase.delete(s, 'table')
        else:
            messages.error(
                request,
                "the paswords or username do not match or no such user")
            return redirect('update1')
        for i in range(0, x):
            con = 'slote' + str(i)
            dictimes.append(con)
        return render(request, 'filluptime.html', {'times': dictimes})
    else:
        messages.error(
            request, "the paswords or username do not match or no such user")
        return redirect('update1')
Esempio n. 17
0
def pushToFirebase():
    currentDate, currentTime = printDateTime()
    firebase.post('/Motion_LivingRoom', {
        'date': currentDate,
        'status': 'active',
        'time': currentTime
    })
    firebase.patch('/Motion_Status', {'status': 'active'})
Esempio n. 18
0
def change_attribute(subject, key, value):
    """
    Reach out to Firebase and change a generic attribute.

    This function is pretty straightforward, it simple swaps out some firebase
    attributes, used quite often.
    """
    firebase.patch('/users/' + subject + '/', data={key: value})
Esempio n. 19
0
def job_calculate():
    init()

    sum = 0
    number = req['action']['detailParams']

    for n in number.keys():
        sum += json.loads(number[n]['value'])['amount']

    job = firebase.get('/User/' + Uid + '/cal_job', None)
    next_job = ""
    for i in range(0, 3):
        if job[i]["score"] == -1:
            firebase.patch('/User/' + Uid + "/cal_job/" + str(i),
                           {"score": sum})

            if 'calculate_3' not in context_list:
                next_job = job[i + 1]['name']

            break

    if 'calculate_3' in context_list:  # 3번째 직업 점수 매겼을 경우
        result = firebase.get('/User/' + Uid + '/cal_job', None)
        max = 0
        rec_job = ""
        job_code = ""
        for i in range(0, 3):
            if result[i]['score'] > max:
                max = result[i]['score']
                rec_job = result[i]['name']
                job_code = result[i]['code']

        firebase.patch('/User/' + Uid + '/rec_job', {
            'name': rec_job,
            'code': job_code
        })

        comment = []
        comment.append(
            makeSimpleText("3가지 직업중 '" + rec_job +
                           "' 직업을 가장 선호하시는군요. 잘 결정하셨네요^^ " + user +
                           "님은 잘하실 수 있을 겁니다.\n\n이 직업의 간단한 정보를 안내해 드릴게요"))
        comment.append(makeSimpleText(callAPI(job_code, False)))

        detail = firebase.get('/UI/career_result/detail_information', None)
        comment.append(detail)

        reply = firebase.get('/UI/career_result/next_button', None)

        return SendReply(comment, [reply])

    comment = []
    comment.append(makeSimpleText("다음으로 " + next_job + "에 대한 점수를 매겨주세요."))
    comment.append(
        makeSimpleText(firebase.get('/UI/interest_result/calculate_job',
                                    None)))

    return SendMessage(comment)
def updateTemperature(temp):
    wares = firebase.get("/warehouse", None)
    global temperatureUpdateTimer
    if(temperatureUpdateTimer <= 0 and wares is not None): #Update when timer reaches 0
        for item in wares:
            if(wares[item]['row'] == 1): #Update all items in row 1
                firebase.patch("/warehouse/"+item,{'temperature':temp})
                temperatureUpdateTimer = 5 #Time between temperature updates
    temperatureUpdateTimer = temperatureUpdateTimer-1
def fir_data():
    if GPIO.input(18):
        print("Door is open")
        status = 'open'
    if GPIO.input(18) == False:
        print("Door is closed")
        status = 'closed'
    data = {"open": status}
    firebase.patch('smart-security-e2179', data)
Esempio n. 22
0
def setPompaMati():
    print "pompa mati"
    firebase.patch('/sensor/relay', {"status": False})
    GPIO_RELAY = 18
    GPIO_RELAY1 = 19
    GPIO.setup(GPIO_RELAY, GPIO.OUT)  # GPIO Assign mode
    GPIO.setup(GPIO_RELAY1, GPIO.OUT)  # GPIO Assign mode
    GPIO.output(GPIO_RELAY, GPIO.HIGH)  # nyala
    GPIO.output(GPIO_RELAY1, GPIO.HIGH)  # nyala
Esempio n. 23
0
def setRelaySpringkler(nyala):
    firebase.patch('/control/relaySpringkler', {"manual": True})
    GPIO.setup(PIN_SPRINGKLER, GPIO.OUT)  # GPIO Assign mode
    if nyala:
        GPIO.output(PIN_SPRINGKLER, GPIO.LOW)  # nyala
        print("Springkler Hidup")
    else:
        GPIO.output(PIN_SPRINGKLER, GPIO.HIGH)  # mati
        print("Springkler Mati")
Esempio n. 24
0
def setRelay(nyala):
    firebase.patch('/sensor/relay', {"isLoading": False})
    GPIO.setup(GPIO_RELAY, GPIO.OUT)  # GPIO Assign mode
    if nyala:
        GPIO.output(GPIO_RELAY, GPIO.LOW)  # nyala
        print("relay hidup")
        firebase.patch('/sensor/relay', {"status": True})
    else:
        GPIO.output(GPIO_RELAY, GPIO.HIGH)  # mati
Esempio n. 25
0
def aggiornaFirebase(ultimoPrenotato, analogico, dataOdierna):
    print('inizio aggiorna')
    urlUpdate = urlDB + '/' + dataOdierna
    #ultimoNumeroPrenotato = ultimoNumeroPrenotato+1
    print(ultimoPrenotato)
    resultUltimo = firebase.patch(urlUpdate, data={'ultimoNumeroPrenotato': str(ultimoPrenotato + 1)})
    resultAnalogico = firebase.patch(urlUpdate, data={'analogico':str(int(analogico) + 1)})
    print (resultUltimo)
    print(resultAnalogico)
def done(request):
    global reg_id
    print(reg_id)
    global dictimep
    global temslots
    global a1
    global dictimes
    global id
    s = str(id) + '/table'
    k = s
    mon = []
    tue = []
    wed = []
    thu = []
    fri = []
    sat = []
    sun = []
    for i in a1:
        s = s + '/' + str(i)
        print(s)
        for j in temslots:
            firebase.patch(
                s, {j: request.GET[i + '+' + dictimep[temslots.index(j)]]})
        s = k
    reg_id = '/' + str(reg_id)
    print(reg_id)
    dic = firebase.get(reg_id, 'table')
    print(dic)
    print(temslots)
    for i in dic.get('mon').values():
        mon.append(i)
    for i in dic.get('tue').values():
        tue.append(i)
    for i in dic.get('wed').values():
        wed.append(i)
    for i in dic.get('thu').values():
        thu.append(i)
    for i in dic.get('fri').values():
        fri.append(i)
    for i in dic.get('sat').values():
        sat.append(i)
    for i in dic.get('sun').values():
        sun.append(i)
    print(wed)
    return render(
        request, 'tab.html', {
            'mon': mon,
            'tue': tue,
            'wed': wed,
            'thu': thu,
            'fri': fri,
            'sat': sat,
            'sun': sun,
            'a1': a1,
            'tem': temslots
        })
Esempio n. 27
0
def setRelayAir(nyala):
    firebase.patch('/sensor/relay2', {"manual": True})
    GPIO.setup(PIN_AIR, GPIO.OUT)  # GPIO Assign mode
    if nyala:
        GPIO.output(PIN_AIR, GPIO.LOW)  # nyala
        print("air hidup")

    else:
        GPIO.output(PIN_AIR, GPIO.HIGH)  # mati
        print("air mati")
Esempio n. 28
0
def try_decode(bit_string, roundId):
    if bit_string in morse_code_lookup.keys():
        data = firebase.get('/morse', roundId)
        s = morse_code_lookup[bit_string]
        data['input'] = data['input'].encode("utf-8")
        data['input'] += s
        firebase.patch('/morse/' + roundId, {'input':data['input']})
        data = firebase.get('/morse', roundId)
        sys.stdout.write(morse_code_lookup[bit_string])
        sys.stdout.flush()
Esempio n. 29
0
def callback():
    agent = str(request.form['CallSid'])
    event = request.form['StatusCallbackEvent']
    firebase.patch("/" + str(agent),
                   data={
                       'ConferenceSid': request.form['ConferenceSid'],
                       'StatusCallbackEvent':
                       request.form['StatusCallbackEvent']
                   })
    return '200'
Esempio n. 30
0
def setRelayPompaB(nyala):
  PIN_POMPAB = 25
  GPIO.setup(PIN_POMPAB, GPIO.OUT)  # GPIO Assign mode
  if nyala:
      firebase.patch('/sensor/relay1', {"isLoading":False}) 
      GPIO.output(PIN_POMPAB, GPIO.LOW) # nyala
      print("Pompa B Nyala")
  else:
      firebase.patch('/sensor/relay1', {"isLoading":False}) 
      GPIO.output(PIN_POMPAB, GPIO.HIGH) # mati
      print("Pompa B Mati")
Esempio n. 31
0
def handle_key():
    """Handle key press from a user."""

    # Get the digit pressed by the user
    digit_pressed = request.values.get('Digits', None)
    if digit_pressed == "1":
        resp = twilio.twiml.Response()

        from firebase import firebase

        firebase = firebase.FirebaseApplication(
            'https://smart911.firebaseio.com', None)
        result1 = firebase.get('/operators', None)

        for operator in result1:
            if result1[operator.encode('ascii')]['online'] == True:
                resp.dial("+" +
                          str(result1[operator.encode('ascii')]['number']))
                id = firebase.get('cases/AutoID/value', None)

                #update case id
                result2 = firebase.patch(
                    "/operators/" + operator.encode('ascii') + '/case/',
                    {'value': id})

                from_number = request.values.get('From', None)

                new_case = {
                    "EMT": {
                        "location": "",
                        "text": ""
                    },
                    "id": id,
                    "user": {
                        "imageURL": "",
                        "location": "much location",
                        "phone": from_number
                    }
                }
                result3 = firebase.post('/cases', new_case)

                #increment AutoID by 1 for next case
                result = firebase.patch('/cases/AutoID', {'value': id + 1})

                return str(resp)

        # If the dial fails:
        resp.say("Sorry, no operator is available")

        return redirect("/")

    # If the caller pressed anything but 1, redirect them to the homepage.
    else:
        return redirect("/")
Esempio n. 32
0
def aggiornaFirebase(ultimoPrenotato, analogico, dataOdierna):
    print('inizio aggiorna')
    urlUpdate = urlDB + '/' + dataOdierna
    #ultimoNumeroPrenotato = ultimoNumeroPrenotato+1
    print(ultimoPrenotato)
    resultUltimo = firebase.patch(
        urlUpdate, data={'ultimoNumeroPrenotato': str(ultimoPrenotato + 1)})
    resultAnalogico = firebase.patch(
        urlUpdate, data={'analogico': str(int(analogico) + 1)})
    print(resultUltimo)
    print(resultAnalogico)
Esempio n. 33
0
def check_water():
    fitbit_water = "%s%s/foods/log/water/date/today.json" % (
        FITIBIT_API, FITBIT_DEV_USER_AC)
    response = requests.get(fitbit_water, headers={"Authorization": AUTH})
    print(response.text)
    # {"summary":{"water":500},"water":[{"amount":500,"logId":5435932865}]}
    res_dict = json.loads(response.text)
    water_ml = res_dict["summary"]["water"]
    firebase_value = firebase.get("/fitbit/water_ml", None)
    print("water firebase value: %s" % firebase_value)
    if firebase_value is None or water_ml > firebase_value:
        firebase.patch(FIREBASE_URL + '/fitbit', {'water_ml': water_ml})
Esempio n. 34
0
def main():
  from firebase import firebase
  firebase = firebase.FirebaseApplication('https://libtech-app.firebaseio.com/', None)
  args = argsFetch()
  logger = loggerFetch(args.get('log_level'))
  logger.info('args: %s', str(args))
  if args['write']:
    d={}
    d=[]
    d.append({'make':'nd','model':'readyToEat','price':95})
    d.append({'make':'sahaja','model':'vegetable','price':55})
    d.append({'make':'tvs','model':'fruit','price':195})
    with open('first.json', 'w') as outfile:  
      json.dump(d, outfile)

  if args['populate']:
    jsonName="districts.json"
    json_data=open(jsonName,encoding='utf-8-sig').read()
    d = json.loads(json_data)
    myDict={}
    for key,values in d.items():
      code=key
      name=values['name']
      parentCode=values['stateCode']
      logger.info(key)
      dictKey="%s_%s_%s" % (code,name,parentCode)
      myDict[dictKey] = {'name': name, 'code': code, 'parentCode': parentCode, 'slug': dictKey }
    logger.info(dictKey)
    result = firebase.patch('https://libtech-app.firebaseio.com/medicines/', myDict)

      
  logger.info("...END PROCESSING") 
  exit(0)
Esempio n. 35
0
def WriteParameters_sync(Parameters):
    '''Write parameters to file'''
    for r in Relays:
        Parameters[r] = G.GetState(r)
        Parameters['LastWritten'] = time.time()
        qP.put(Parameters)
    try:
        r = firebase.patch('/Parameters', Parameters, params=Params)
    except:
        logger.info('Error writing parameters to Firebase')
    return Parameters
Esempio n. 36
0
def newDroplet(gh_id=None, int_id=None):
    if gh_id:
        firebase.patch('/projects/%s/%s/' % (gh_id, int_id), data={'state': 'Creating droplet'})
    project = firebase.get('/projects/%s/%s' % (gh_id, int_id), name=None, params=None)
    num = random.randint(1111111,9999999)
    images = {'flask':6219398,'sinatra':6219719,'php':6222492}
    newdrop = doPost('/droplets',
        {'name':'%s%s.dep10y.me' % (project['type'],num),
        'region':'nyc3',
        'image': images[project['type']],
        'ssh_keys':[325148],
        'size':'512mb'})
    if gh_id:
        firebase.patch('/projects/%s/%s/' % (gh_id, int_id), data={'state': 'Waiting for creation to finish', 'droplet_id':newdrop['droplet']['id']})
    time.sleep(30)
    if gh_id:
        firebase.patch('/projects/%s/%s/' % (gh_id, int_id), data={'state': 'Setting DNS'})
    createdDrop = doGet('/droplets/%s' % newdrop['droplet']['id'])
    newsets = getRecords()
    domainset = doNCPost(dict({'Command':'namecheap.domains.dns.setHosts','SLD':'dep10y','TLD':'me','HostName1':'%s%s' % (project['type'],num),'TTL1':'1200','RecordType1':'A','Address1':createdDrop['droplet']['networks']['v4'][0]['ip_address']}.items()+newsets.items()))
    if gh_id:
        firebase.patch('/projects/%s/%s/' % (gh_id, int_id), data={'state': 'Running at %s' % createdDrop['droplet']['name']})
    return createdDrop
Esempio n. 37
0
def change_attribute(subject, key, value):
    try:
        firebase.patch('/users/' + str(subject), data={key: value})
    except Exception as e:
        print str(e)
Esempio n. 38
0
def update(zone,firebase):
    url="ITESM/Zone"+str(zone.getName())
    #update busy and update total with zone.getBusy and zone.getTotal     
    firebase.patch(url,{"Busy":zone.getBusy()})
    firebase.patch(url,{"Total":zone.getTotal()})
Esempio n. 39
0
def main():
  from firebase import firebase
  firebase = firebase.FirebaseApplication('https://libtech-app.firebaseio.com/', None)
  regex=re.compile(r'<input+.*?"\s*/>+',re.DOTALL)
  args = argsFetch()
  finyear='17'
  fullfinyear=getFullFinYear(finyear)
  logger = loggerFetch(args.get('log_level'))
  logger.info('args: %s', str(args))
  logger.info("BEGIN PROCESSING...")
  db = dbInitialize(db=nregaDB, charset="utf8")  # The rest is updated automatically in the function
  cur=db.cursor()
  db.autocommit(True)
  #Query to set up Database to read Hindi Characters
  blockCode='005'
  fullBlockCode='0515005'
  panchayatCodes="(panchayatCode = '%s' or panchayatCode='%s')" % ('029','034')
  districtName="muzaffarpur"
  query="SET NAMES utf8"
  cur.execute(query)
  result = firebase.delete('https://libtech-app.firebaseio.com', None)

  query="select blockName,panchayatName from panchayats where rawDistrictName='%s' and blockCode='%s' and %s " %(districtName,blockCode,panchayatCodes)
  cur.execute(query)
  results=cur.fetchall()
  for row in results:
    [blockName,panchayatName]=row
    result = firebase.post('https://libtech-app.firebaseio.com/geo/%s'%(blockName.upper()), {'panchayatName': panchayatName.upper()})

  query="select DISTINCT(jobcard),blockName,panchayatName from workDetails where fullBlockCode='%s' and finyear='17' and %s" %(fullBlockCode,panchayatCodes)
  cur.execute(query)
  results=cur.fetchall()
  for row in results:
    [jobcard1,blockName,panchayatName]=row
    jobcard=jobcard1.replace("/","_")
    logger.info(jobcard)
    result = firebase.post('https://libtech-app.firebaseio.com/jobcard/%s/%s/'%(blockName.upper(),panchayatName.upper()), {'jobcard': jobcard})

  #  print(result)
  query="select  panchayatName, jobcard, name, musterNo, workName, totalWage, wagelistNo, ftoNo, musterStatus, bankNamePostOffice, date_format(dateTo, '%d-%M-%Y') as dateTo, DATE_FORMAT(firstSignatoryDate, '%d-%M-%Y') as firstSignatoryDate, DATE_FORMAT(secondSignatoryDate, '%d-%M-%Y') as secondSignatoryDate, DATE_FORMAT(transactionDate, '%d-%M-%Y') as transactionDate, DATE_FORMAT(bankProcessedDate, '%d-%M-%Y') as bankProcessedDate, DATE_FORMAT(paymentDate, '%d-%M-%Y') as paymentDate, DATE_FORMAT(creditedDate, '%d-%M-%Y') as creditedDate, ftoMatchStatus, rejectionReason, @varMaxDate:=greatest(COALESCE(dateTo, '1900-01-01 00:00:00'),   COALESCE(firstSignatoryDate,    '1900-01-01 00:00:00'),   COALESCE(secondSignatoryDate,    '1900-01-01 00:00:00'),   COALESCE(transactionDate, '1900-01-01 00:00:00'),   COALESCE(bankProcessedDate, '1900-01-01 00:00:00'),   COALESCE(paymentDate, '1900-01-01 00:00:00'),   COALESCE(creditedDate, '1900-01-01 00:00:00')) as maxDate, CASE @varMaxDate WHEN dateTo THEN 'dateTo' WHEN firstSignatoryDate THEN 'firstSignatoryDate' WHEN secondSignatoryDate THEN 'secondSignatoryDate' WHEN transactionDate THEN 'transactionDate' WHEN bankProcessedDate THEN 'bankProcessedDate' WHEN paymentDate THEN 'paymentDate' WHEN creditedDate THEN 'creditedDate' END AS maxDateColName from workDetails  where fullBlockCode='0515005' and finyear='17' and (panchayatCode='029' or panchayatCode='034') order by dateTo "
  cur.execute(query)
  results=cur.fetchall()
  for row in results:
    panchayatName = row[0].upper()
    jobcard = row[1]
    jobcard = jobcard.replace('/', '_')
    name = row[2]
    musterNo = row[3]
    workName = row[4]
    totalWage = row[5]
    wagelistNo = row[6]
    ftoNo = row[7]
    musterStatus = row[8]
    bankNameOrPOName = row[9]
    dateTo = row[10]
    firstSignatoryDate = row[11]
    secondSignatoryDate = row[12]
    transactionDate = row[13]
    bankProcessedDate = row[14]
    paymentDate = row[15]
    creditedDate = row[16]
    ftoStatus = row[17]
    rejectionReason = row[18]
    maxDate = row[19]
    maxDateColName = row[20]
    try:
        currentStatusOfNode = firebase.get('/data/%s/%s/%s'%(panchayatName, jobcard, dateTo), None)
        currentNoTransactionsForDate = len(currentStatusOfNode) - 1
        newTransactionNo = currentNoTransactionsForDate + 1
    except: 
        newTransactionNo = 1
    result = firebase.patch('https://libtech-app.firebaseio.com/data/%s/%s/%s/%s'%(panchayatName, jobcard, dateTo, newTransactionNo), {'jobcard': jobcard, 'name': name, 'musterNo': musterNo, 'workName': workName, 'totalWage': totalWage, 'wagelistNo': wagelistNo, 'ftoNo': ftoNo, 'musterStatus': musterStatus, 'bankNameOrPOName': bankNameOrPOName, 'dateTo': dateTo, 'firstSignatoryDate': firstSignatoryDate, 'secondSignatoryDate': secondSignatoryDate, 'transactionDate': transactionDate, 'bankProcessedDate': bankProcessedDate, 'paymentDate': paymentDate, 'creditedDate': creditedDate, 'ftoStatus': ftoStatus, 'rejectionReason': rejectionReason, 'maxDate': maxDate, 'maxDateColName': maxDateColName})
    #print(result)
 
  dbFinalize(db) # Make sure you put this if there are other exit paths or errors
  logger.info("...END PROCESSING")     
  exit(0)
Esempio n. 40
0
def update(threadName,firebase,count):
  firebase.patch('/ITESM/ZoneB', {'Busy':count})
Esempio n. 41
0
      os.system('clear')
 
      print
      print ' GPS reading'
      print '----------------------------------------'
      print 'latitude    ' , gpsd.fix.latitude
      print 'longitude   ' , gpsd.fix.longitude
      print 'time utc    ' , gpsd.utc,' + ', gpsd.fix.time
      print 'altitude (m)' , gpsd.fix.altitude
      print 'eps         ' , gpsd.fix.eps
      print 'epx         ' , gpsd.fix.epx
      print 'epv         ' , gpsd.fix.epv
      print 'ept         ' , gpsd.fix.ept
      print 'speed (m/s) ' , gpsd.fix.speed
      print 'climb       ' , gpsd.fix.climb
      print 'track       ' , gpsd.fix.track
      print 'mode        ' , gpsd.fix.mode
      print
      print 'sats        ' , gpsd.satellites
      result = firebase.patch('trainSystem/vehicles/35',{ 'lat' :  gpsd.fix.latitude, 
          'lon' : gpsd.fix.longitude
       	})
      print result	 
      time.sleep(3) #set to whatever
 
  except (KeyboardInterrupt, SystemExit): #when you press ctrl+c
    print "\nKilling Thread..."
    gpsp.running = False
    gpsp.join() # wait for the thread to finish what it's doing
  print "Done.\nExiting."
Esempio n. 42
0
from firebase import firebase

firebase = firebase.FirebaseApplication("https://glaring-torch-8449.firebaseio.com/", authentication=None)

result = firebase.get("/courses", None)
print result

# def newUser(response):
#   print "a new user was created", response


# firebase.get_async('/users', None, callback=newUser)

users = firebase.get("/users", None)

print users

path = "/users/"
for u in users:
    url = path + u
    firebase.patch(url, {"courses": result})
    print u
Esempio n. 43
0
# post =
# post = firebase.patch('/experiment2', test)
while True:
	get = firebase.get('/spacegame/hangout2', None)
	for player in get.keys():
		if player == 'target':
			pass
		else:
			get[player]['xpos'] += get[player]['xspeed']
			get[player]['ypos'] += get[player]['yspeed']
			# print "player ....... " , player
			# print player
			# print get[player]['xpos']
			# print "player : ", get[player]
			# print '/spacegame/hangout2/'+player+'/xpos'
			firebase.patch('/spacegame/hangout2/'+player, get[player])
			firebase.patch('/spacegame/hangout2/'+player, get[player])

			if get[player]['thrust'] == True:
				if get[player]['rotate'] == 0 :
					get[player]['xspeed'] += -5

				elif get[player]['rotate'] == 45 :
					get[player]['xspeed'] += -5
					get[player]['yspeed'] += -5

				elif get[player]['rotate'] == 90 :
					get[player]['yspeed'] += -5

				elif get[player]['rotate'] == 135 :
					get[player]['xspeed'] += +5
Esempio n. 44
0
import serial
import pynmea2
from firebase import firebase
firebase = firebase.FirebaseApplication('https://boiling-fire-7865.firebaseio.com')


serialStream = serial.Serial("/dev/ttyAMA0", 9600, timeout=0.5)

while True:
    sentence = serialStream.readline()
    if sentence.find('GGA') > 0:
        data = pynmea2.parse(sentence)
        print "{time} : {lat},{lon} ".format(time=data.timestamp,lat=data.latitude,lon=data.longitude)
	result = firebase.patch('trainSystem/vehicles/36',{ 'lat' : data.latitude, 'lon' : data.longitude,
         'timestamp' :  {'.sv': 'timestamp'}
       })
	print result

Esempio n. 45
0
def callback():
    agent = str(request.form['CallSid'])
    event = request.form['StatusCallbackEvent']
    firebase.patch("/"+str(agent), data={'ConferenceSid': request.form['ConferenceSid'], 'StatusCallbackEvent': request.form['StatusCallbackEvent']})
    return '200'
Esempio n. 46
0
def patch_object(url, data):
    result = firebase.patch(url, data=data)
    return result
Esempio n. 47
0
from firebase import firebase
firebase = firebase.FirebaseApplication('https://hekate.firebaseio.com', None)

# results = firebase.get("hekate", None)

firebase.patch("User1", {"ping": "168.168.1.1"})

# firebase.delete("Commands", 'cmd')
# firebase.delete("Commands", 'Ping')


def shownewentry(results):
    print(results)

# firebase.on("child_added", shownewentry(snapshot))
Esempio n. 48
0
from firebase import firebase
import json as simplejson
firebase = firebase.FirebaseApplication('https://blistering-fire-6119.firebaseio.com',None)
result  = firebase.get('/users',None)
print result
 
location_1 = 'Avaliable'
location_2 = 'Not avaliable'
name = {'Morningside_dr':location_1, "123st":location_2}
#data = json.dumps(name)
#URL = 'https://blistering-fire-6119.firebaseio.com/users'
#print firebase.get(URL)
a = firebase.patch('/status',name) 
#post = firebase_.post('/users',name)

#print post
 

import os
from azure.servicebus import ServiceBusService, Message, Topic, Rule, DEFAULT_RULE_NAME
from firebase import firebase
import json

ns_key = os.environ.get('NS_KEY')
firebase = firebase.FirebaseApplication('https://logbasedev.firebaseio.com/', None)

bus_service = ServiceBusService(
    service_namespace='onroad-ns',
    shared_access_key_name='RootManageSharedAccessKey',
    shared_access_key_value=ns_key)

while True:
    msg = bus_service.receive_subscription_message('onroad-topic', 'locations', peek_lock=False)
    if msg.body:
	    for event in json.loads(msg.body):
	        new_location = {'latitude':event['lat'], 'longitude':event['long'], 'locationtime':event['time']};
	        #TODO: Remove device hardcoding
	        firebase.patch('/account/simplelogin:2/livecars/0', new_location)