def create_networks(fmc, network_list): """Create Networks Objects""" for net in network_list: if "name" in net and "value" in net: netaddr = fmcapi.Networks(fmc=fmc, name=net["name"], value=net["value"]) netaddr.post()
def test__ipv4staticroutes(fmc): logging.info( "Testing IPv4StaticRoutes class. get, post, put, delete IPv4StaticRoute Objects. Requires a registered device" ) starttime = str(int(time.time())) namer = f"_fmcapi_test_{starttime}" iphost1 = fmcapi.Hosts(fmc=fmc, name="_iphost1" + namer, value="10.254.0.1") iphost1.post() ipnet1 = fmcapi.Networks(fmc=fmc, name="_ipnet1" + namer, value="192.0.2.0/25") ipnet2 = fmcapi.Networks(fmc=fmc, name="_ipnet2" + namer, value="192.0.2.128/25") ipnet1.post() ipnet2.post() ipv4route1 = fmcapi.IPv4StaticRoutes(fmc=fmc, name="_ipv4route1") ipv4route1.device(device_name="ftdv01.ccie.lab") ipv4route1.networks(action="add", networks=[ipnet1.name, ipnet2.name]) ipv4route1.gw(name=iphost1.name) ipv4route1.interfaceName = "ifname" ipv4route1.metricValue = 1 result = ipv4route1.post() ipv4route2 = fmcapi.IPv4StaticRoutes(fmc=fmc, name="_ipv4route1") ipv4route2.device(device_name="device_name") ipv4route2.id = result["id"] ipv4route2.get() del ipv4route1 ipv4route2.networks(action="remove", networks=[ipnet2.name]) ipv4route2.put() ipv4route2.delete() ipnet1.delete() ipnet2.delete() iphost1.delete() logging.info("Testing IPv4StaticRoutes class done.\n")
def test__ip_network(fmc): logging.info("Test IPNetwork. Post, get, put, delete Network Objects.") starttime = str(int(time.time())) namer = f"_fmcapi_test_{starttime}" obj1 = fmcapi.Networks(fmc=fmc) obj1.name = namer obj1.value = "8.8.8.0/24" obj1.post() time.sleep(1) del obj1 obj1 = fmcapi.Networks(fmc=fmc, name=namer) obj1.get() obj1.value = "9.9.9.0/24" obj1.put() time.sleep(1) obj1.delete() logging.info("Test IPNetwork done.\n")
def main(): """ The FTD device already has 100.127.100.15 on its management interface and the command 'configure network manager 100.64.0.155 cisco123' has already been manually typed on the FTD's CLI. """ with fmcapi.FMC(host='100.64.0.166', username='******', password='******', autodeploy=True) as fmc1: # Create Security Zones sz1 = fmcapi.SecurityZones(fmc=fmc1) sz1.name = 'Restricted' sz1.post() sz2 = fmcapi.SecurityZones(fmc=fmc1) sz2.name = 'Outside' sz2.post() # Create Objects border1 = fmcapi.NetworkAddresses(fmc=fmc1, name='Border-1', value='100.126.1.13') border1.post() finance = fmcapi.NetworkAddresses(fmc=fmc1, name='finance.dcloud.cisco.com', value='100.64.0.134') finance.post() pci = fmcapi.NetworkAddresses(fmc=fmc1, name='pci.dcloud.cisco.com', value='100.64.0.133') pci.post() ftd_border1_net = fmcapi.Networks(fmc=fmc1, name='FTD-Border1-net', value='100.126.1.12/30') ftd_border1_net.post() restricted_vn_net = fmcapi.Networks(fmc=fmc1, name='Restricted-VN-net', value='100.110.0.0/16') restricted_vn_net.post() # Create ACPs acp1 = fmcapi.AccessPolicies( fmc=fmc1, name='Restricted-VN-Initial-Policy', defaultAction='NETWORK_DISCOVERY', ) acp1.post() acp2 = fmcapi.AccessPolicies( fmc=fmc1, name='Restricted-VN-RTC-Policy', defaultAction='NETWORK_DISCOVERY', ) acp2.post() # Create ACP Rules for the ACPs initial_rule1 = fmcapi.AccessRules(fmc=fmc1, acp_name=acp1.name, name='Permit-ANY') initial_rule1.logBegin = True initial_rule1.logEnd = True initial_rule1.action = 'ALLOW' initial_rule1.post() rapid_threat_rule1 = fmcapi.AccessRules(fmc=fmc1, acp_name=acp2.name, name='PCIUsers-to-sources') rapid_threat_rule1.source_network(action='add', name=restricted_vn_net.name) rapid_threat_rule1.destination_port(action='add', name='HTTP') # rapid_threat_rule1.isesgt(name='PCI_user') rapid_threat_rule1.logBegin = True rapid_threat_rule1.logEnd = True rapid_threat_rule1.intrusion_policy(action='add', name='Restricted-VN-IPS-Policy') rapid_threat_rule1.action = 'ALLOW' rapid_threat_rule1.enabled = True rapid_threat_rule1.post() rapid_threat_rule2 = fmcapi.AccessRules( fmc=fmc1, acp_name=acp2.name, name='FinanceUsers2PCIResource') rapid_threat_rule2.source_network(action='add', name=restricted_vn_net.name) rapid_threat_rule2.destination_network(action='add', name=finance.name) rapid_threat_rule2.destination_port(action='add', name='HTTP') # rapid_threat_rule2.isesgt(name='PCI_user') # rapid_threat_rule2.isesgt(name='finance_user') rapid_threat_rule2.logBegin = True rapid_threat_rule2.logEnd = True rapid_threat_rule2.intrusion_policy(action='add', name='Restricted-VN-IPS-Policy') rapid_threat_rule2.action = 'ALLOW' rapid_threat_rule2.enabled = True rapid_threat_rule2.post() rapid_threat_rule3 = fmcapi.AccessRules( fmc=fmc1, acp_name=acp2.name, name='DenyUnauthenticatedUsers') rapid_threat_rule3.source_network(action='add', name=restricted_vn_net.name) rapid_threat_rule3.destination_network(action='add', name=finance.name) rapid_threat_rule3.destination_network(action='add', name=pci.name) rapid_threat_rule3.destination_port(action='add', name='HTTP') rapid_threat_rule3.logBegin = True rapid_threat_rule3.action = 'BLOCK' rapid_threat_rule3.enabled = True rapid_threat_rule3.post() rapid_threat_rule4 = fmcapi.AccessRules(fmc=fmc1, acp_name=acp2.name, name='Permit-ANY') rapid_threat_rule4.source_network(action='add', name='ipv4-any') rapid_threat_rule4.destination_network(action='add', name='ipv4-any') rapid_threat_rule4.action = 'ALLOW' rapid_threat_rule4.enabled = True rapid_threat_rule4.post() # Add FTD device to FMC ftd1 = fmcapi.DeviceRecords(fmc=fmc1) ftd1.hostName = '100.127.100.15' ftd1.regKey = 'C1sco12345' ftd1.acp(name='Restricted-VN-Initial-Policy') ftd1.name = 'FTD' ftd1.licensing(action='add', name='MALWARE') ftd1.licensing(action='add', name='VPN') ftd1.licensing(action='add', name='BASE') ftd1.licensing(action='add', name='THREAT') ftd1.licensing(action='add', name='URL') # Push to FMC to start device registration. ftd1.post(post_wait_time=300) # Once registration is complete configure the interfaces of ftd. int101 = fmcapi.PhysicalInterfaces(fmc=fmc1, device_name=ftd1.name) int101.get(name='GigabitEthernet0/0') int101.enabled = True int101.ifname = 'FTD-to-Fusion' int101.sz(name=sz2.name) int101.static(ipv4addr='100.127.101.254', ipv4mask=24) int101.put() int3004 = fmcapi.PhysicalInterfaces(fmc=fmc1, device_name=ftd1.name) int3004.get(name='GigabitEthernet0/1') int3004.enabled = True int3004.ifname = 'FTD-to-Border1' int3004.sz(name=sz1.name) int3004.static(ipv4addr='100.126.1.14', ipv4mask=30) int3004.put()
def main(): """ The hq-ftd device already has 10.0.0.254 on its manage interface and the command 'configure network manager 10.0.0.10 cisco123' has already been manually typed on the FTD's CLI. """ # ### Set these variables to match your environment. ### # host = "10.0.0.10" username = "******" password = "******" with fmcapi.FMC( host=host, username=username, password=password, autodeploy=True, file_logging="hq-ftd.log", ) as fmc1: # Create an ACP acp = fmcapi.AccessPolicies(fmc=fmc1, name="ACP Policy") acp.defaultAction = "BLOCK" # I intentionally put a "space" in the ACP name to show that fmcapi will "fix" that for you. acp.post() # Create Security Zones sz_inside = fmcapi.SecurityZones(fmc=fmc1, name="inside", interfaceMode="ROUTED") sz_inside.post() sz_outside = fmcapi.SecurityZones(fmc=fmc1, name="outside", interfaceMode="ROUTED") sz_outside.post() sz_dmz = fmcapi.SecurityZones(fmc=fmc1, name="dmz", interfaceMode="ROUTED") sz_dmz.post() # Create Network Objects hq_dfgw_gateway = fmcapi.Hosts(fmc=fmc1, name="hq-default-gateway", value="100.64.0.1") hq_dfgw_gateway.post() hq_lan = fmcapi.Networks(fmc=fmc1, name="hq-lan", value="10.0.0.0/24") hq_lan.post() all_lans = fmcapi.Networks(fmc=fmc1, name="all-lans", value="10.0.0.0/8") all_lans.post() hq_fmc = fmcapi.Hosts(fmc=fmc1, name="hq_fmc", value="10.0.0.10") hq_fmc.post() fmc_public = fmcapi.Hosts(fmc=fmc1, name="fmc_public_ip", value="100.64.0.10") fmc_public.post() # Create ACP Rule to permit hq_lan traffic inside to outside. hq_acprule = fmcapi.AccessRules( fmc=fmc1, acp_name=acp.name, name="Permit HQ LAN", action="ALLOW", enabled=True, ) hq_acprule.source_zone(action="add", name=sz_inside.name) hq_acprule.destination_zone(action="add", name=sz_outside.name) hq_acprule.source_network(action="add", name=hq_lan.name) hq_acprule.destination_network(action="add", name="any-ipv4") # hq_acprule.logBegin = True # hq_acprule.logEnd = True hq_acprule.post() # Build NAT Policy nat = fmcapi.FTDNatPolicies(fmc=fmc1, name="NAT Policy") nat.post() # Build NAT Rule to NAT all_lans to interface outside autonat = fmcapi.AutoNatRules(fmc=fmc1) autonat.natType = "DYNAMIC" autonat.interfaceInTranslatedNetwork = True autonat.original_network(all_lans.name) autonat.source_intf(name=sz_inside.name) autonat.destination_intf(name=sz_outside.name) autonat.nat_policy(name=nat.name) autonat.post() # Build NAT Rule to allow inbound traffic to FMC (Branches need to register to FMC.) fmc_nat = fmcapi.ManualNatRules(fmc=fmc1) fmc_nat.natType = "STATIC" fmc_nat.original_source(hq_fmc.name) fmc_nat.translated_source(fmc_public.name) fmc_nat.source_intf(name=sz_inside.name) fmc_nat.destination_intf(name=sz_outside.name) fmc_nat.nat_policy(name=nat.name) fmc_nat.enabled = True fmc_nat.post() # Add hq-ftd device to FMC hq_ftd = fmcapi.DeviceRecords(fmc=fmc1) # Minimum things set. hq_ftd.hostName = "10.0.0.254" hq_ftd.regKey = "cisco123" hq_ftd.acp(name=acp.name) # Other stuff I want set. hq_ftd.name = "hq-ftd" hq_ftd.licensing(action="add", name="MALWARE") hq_ftd.licensing(action="add", name="VPN") hq_ftd.licensing(action="add", name="BASE") hq_ftd.licensing(action="add", name="THREAT") hq_ftd.licensing(action="add", name="URLFilter") # Push to FMC to start device registration. hq_ftd.post(post_wait_time=300) # Once registration is complete configure the interfaces of hq-ftd. hq_ftd_g00 = fmcapi.PhysicalInterfaces(fmc=fmc1, device_name=hq_ftd.name) hq_ftd_g00.get(name="GigabitEthernet0/0") hq_ftd_g00.enabled = True hq_ftd_g00.ifname = "IN" hq_ftd_g00.static(ipv4addr="10.0.0.1", ipv4mask=24) hq_ftd_g00.sz(name="inside") hq_ftd_g00.put() hq_ftd_g01 = fmcapi.PhysicalInterfaces(fmc=fmc1, device_name=hq_ftd.name) hq_ftd_g01.get(name="GigabitEthernet0/1") hq_ftd_g01.enabled = True hq_ftd_g01.ifname = "OUT" hq_ftd_g01.static(ipv4addr="100.64.0.200", ipv4mask=24) hq_ftd_g01.sz(name="outside") hq_ftd_g01.put() # Build static default route for HQ FTD hq_default_route = fmcapi.IPv4StaticRoutes(fmc=fmc1, name="hq_default_route") hq_default_route.device(device_name=hq_ftd.name) hq_default_route.networks(action="add", networks=["any-ipv4"]) hq_default_route.gw(name=hq_dfgw_gateway.name) hq_default_route.interfaceName = hq_ftd_g01.ifname hq_default_route.metricValue = 1 hq_default_route.post() # Associate NAT policy with HQ FTD device. devices = [{"name": hq_ftd.name, "type": "device"}] assign_nat_policy = fmcapi.PolicyAssignments(fmc=fmc1) assign_nat_policy.ftd_natpolicy(name=nat.name, devices=devices) assign_nat_policy.post()
def test__ftds2svpns(fmc): logging.info( "Testing FTDS2SVPNs class. Requires at least one registered device.") starttime = str(int(time.time())) namer = f"_fmcapi_test_{starttime}" # Create a Site2Site VPN Policy vpnpol1 = fmcapi.FTDS2SVPNs(fmc=fmc, name=namer) vpnpol1.topologyType = "POINT_TO_POINT" vpnpol1.ikeV1Enabled = True vpnpol1.ikeV2Enabled = False vpnpol1.post() vpnpol1.get() # Create some network objects for the encryption domains obj1 = fmcapi.Networks(fmc=fmc) obj1.name = "_net1_site1" obj1.value = "10.255.0.0/24" obj1.post() time.sleep(1) obj2 = fmcapi.Networks(fmc=fmc) obj2.name = "_net2_site1" obj2.value = "10.255.1.0/24" obj2.post() time.sleep(1) obj3 = fmcapi.Networks(fmc=fmc) obj3.name = "_net1_site2" obj3.value = "10.255.2.0/24" obj3.post() time.sleep(1) # Create Phase 1 settings # There is no way to search by name, so we just find the iksettings object inside the vpn policy ike1_json = fmcapi.IKESettings(fmc=fmc) ike1_json.vpn_policy(pol_name=namer) items = ike1_json.get()["items"][0] ike1 = fmcapi.IKESettings(fmc=fmc) ike1.vpn_policy(pol_name=namer) ike1.id = items["id"] ike1.get() ike1.ike_policy(pol_name="preshared_sha_aes192_dh5_10") ike1.put() # Create Phase 2 settings # There is no way to search by name, so we just find the ipsecsettings object inside the vpn policy ipsec1_json = fmcapi.IPSecSettings(fmc=fmc) ipsec1_json.vpn_policy(pol_name=namer) items = ipsec1_json.get()["items"][0] ipsec1 = fmcapi.IPSecSettings(fmc=fmc) ipsec1.vpn_policy(pol_name=namer) ipsec1.id = items["id"] ipsec1.get() ipsec1.ipsec_policy(pol_name="tunnel_aes256_sha") ipsec1.put() # Add vpn peers # FTD in HA mode should use the name of logical HA device endp1 = fmcapi.Endpoints(fmc=fmc) endp1.peerType = "PEER" endp1.connectionType = "BIDIRECTIONAL" endp1.vpn_policy(pol_name=namer) endp1.endpoint(action="add", device_name="_ha_name") endp1.vpn_interface(device_name="_ha_name", ifname="OUTSIDE1") endp1.encryption_domain(action="add", names=["_net1_site1", "_net2_site1"]) endp2 = fmcapi.Endpoints(fmc=fmc) endp2.peerType = "PEER" endp2.connectionType = "BIDIRECTIONAL" endp2.vpn_policy(pol_name=namer) endp2.endpoint(action="add", device_name="_device_name") endp2.vpn_interface(device_name="device_name", ifname="OUTSIDE1") endp2.encryption_domain(action="add", names=["_net1_site2"]) endp1.post() endp2.post() time.sleep(30) vpnpol1.delete() obj1.delete() obj2.delete() obj3.delete()
def test__acp_rule(fmc): logging.info( "In preparation for testing ACPRule methods, set up some known objects in the FMC." ) starttime = str(int(time.time())) namer = f"_fmcapi_test_{starttime}" # Build an IP host object iphost1 = fmcapi.Hosts(fmc=fmc, name="_iphost1", value="7.7.7.7") iphost1.post() # Build an IP Network object ipnet1 = fmcapi.Networks(fmc=fmc, name="_ipnet1", value="1.2.3.0/24") ipnet1.post() # Build an IP range object iprange1 = fmcapi.Ranges(fmc=fmc, name="_iprange1", value="6.6.6.6-7.7.7.7") iprange1.post() # Build a Network Group object ipnet2 = fmcapi.Networks(fmc=fmc, name="_ipnet2", value="5.5.5.0/24") ipnet2.post() time.sleep(1) # Build an FQDNS object fqdns1 = fmcapi.FQDNS(fmc=fmc, name="_fqdns1", value="www.cisco.com") fqdns1.post() obj1 = fmcapi.NetworkGroups(fmc=fmc, name="_fmcapi_test_networkgroup") obj1.named_networks(action="add", name=ipnet2.name) obj1.unnamed_networks(action="add", value="4.4.4.4/32") obj1.post() # Build a URL object url1 = fmcapi.URLs(fmc=fmc, name="_url1", url="asdf.org") url1.post() url1.get() # lists = [{"type": url1.type, "id": url1.id, "name": url1.name}] # Build a VLAN Tag object vlantag1 = fmcapi.VlanTags(fmc=fmc, name="_vlantag1", data={ "startTag": "888", "endTag": "999" }) vlantag1.post() # Build a Port object pport1 = fmcapi.ProtocolPortObjects(fmc=fmc, name="_pport1", port="9090", protocol="UDP") pport1.post() # Build a Port Group Object obj10 = fmcapi.ProtocolPortObjects(fmc=fmc, name="_porttcp1", port="8443", protocol="TCP") obj10.post() obj11 = fmcapi.ProtocolPortObjects(fmc=fmc, name="_portudp1", port="161", protocol="UDP") obj11.post() obj12 = fmcapi.ProtocolPortObjects(fmc=fmc, name="_portrangetcp1", port="0-1023", protocol="TCP") obj12.post() obj2 = fmcapi.PortObjectGroups(fmc=fmc, name="_fmcapi_test_portobjectgroup") obj2.named_ports(action="add", name=obj10.name) obj2.named_ports(action="add", name=obj11.name) obj2.named_ports(action="add", name=obj12.name) obj2.post() # Build a Security Zone object sz1 = fmcapi.SecurityZones(fmc=fmc, name="_sz1", interfaceMode="ROUTED") sz1.post() # Build an ACP Object acp1 = fmcapi.AccessPolicies(fmc=fmc, name=namer) acp1.post() # Get a file_policy # fp = fmcapi.FilePolicies(fmc=fmc1, name='daxm_test') time.sleep(1) logging.info("Setup of objects for ACPRule test done.\n") logging.info( "Test ACPRule. Try to test all features of all methods of the ACPRule class." ) acprule1 = fmcapi.AccessRules(fmc=fmc, acp_name=acp1.name) acprule1.name = namer acprule1.action = "ALLOW" acprule1.enabled = False acprule1.sendEventsToFMC = True acprule1.logFiles = False acprule1.logBegin = True acprule1.logEnd = True acprule1.variable_set(action="set", name="Default-Set") acprule1.source_zone(action="add", name=sz1.name) acprule1.destination_zone(action="add", name=sz1.name) acprule1.intrusion_policy(action="set", name="Security Over Connectivity") acprule1.vlan_tags(action="add", name=vlantag1.name) acprule1.source_port(action="add", name=pport1.name) acprule1.destination_port(action="add", name=pport1.name) acprule1.destination_port(action="add", name=obj2.name) acprule1.source_network(action="add", name=iphost1.name) acprule1.source_network(action="add", name=obj1.name) acprule1.source_network(action="add", name=iprange1.name) acprule1.destination_network(action="add", name=ipnet1.name) acprule1.destination_network(action="add", name=iprange1.name) acprule1.destination_network(action="add", name=fqdns1.name) # acprule1.urls(name=url1.name) # acprule1.file_policy(action='set', name=fp.name) acprule1.post() logging.info("Test ACPRule done.\n") logging.info("Cleanup of testing ACPRule methods.") acprule1.delete() time.sleep(1) acp1.delete() iphost1.delete() ipnet1.delete() iprange1.delete() fqdns1.delete() obj1.delete() ipnet2.delete() url1.delete() vlantag1.delete() pport1.delete() sz1.delete() obj2.delete() obj10.delete() obj11.delete() obj12.delete() logging.info("Cleanup of objects for ACPRule test done.\n")
def test__autonat(fmc): logging.info("Testing AutoNatPolicy class.") starttime = str(int(time.time())) namer = f"_fmcapi_test_{starttime}" # Create a container policy for FTD NAT rules natpol1 = fmcapi.FTDNatPolicies(fmc=fmc, name=namer) natpol1.post() natpol1.get() # Create original and translate objects obj1 = fmcapi.Networks(fmc=fmc) obj1.name = "_net_original" obj1.value = "10.0.0.0/8" obj1.post() time.sleep(1) obj2 = fmcapi.Hosts(fmc=fmc) obj2.name = "_net_xlate" obj2.value = "192.0.2.1" obj2.post() time.sleep(1) # Create identity nat object obj3 = fmcapi.Networks(fmc=fmc) obj3.name = "_net_identity" obj3.value = "192.168.0.0/24" obj3.post() time.sleep(1) # Create nat pool objects obj4 = fmcapi.Networks(fmc=fmc) obj4.name = "_net_original_pool" obj4.value = "172.16.0.0/24" obj4.post() time.sleep(1) # PAT Pool must be a range, not a subnet obj5 = fmcapi.Ranges(fmc=fmc) obj5.name = "_net_xlate_pool" obj5.value = "192.0.2.128-192.0.2.254" obj5.post() time.sleep(1) # Create interface PAT object obj6 = fmcapi.Networks(fmc=fmc) obj6.name = "_net_original_intf" obj6.value = "192.168.1.0/24" obj6.post() time.sleep(1) # Create Security Zones sz1 = fmcapi.SecurityZones(fmc=fmc, name="IG-INSIDE") sz1.post() sz2 = fmcapi.SecurityZones(fmc=fmc, name="SZ-OUTSIDE1") sz2.post() # Autonat a network object to a host autonat1 = fmcapi.AutoNatRules(fmc=fmc) autonat1.original_network(name="_net_original") autonat1.translated_network(name="_net_xlate") autonat1.natType = "STATIC" # Source and destination interface can be either an interface group or security zone autonat1.source_intf(name="IG-INSIDE") autonat1.destination_intf(name="SZ-OUTSIDE1") autonat1.nat_policy(name=namer) # Autonat identity nat autonat2 = fmcapi.AutoNatRules(fmc=fmc) autonat2.identity_nat(name="_net_identity") autonat2.source_intf(name="IG-INSIDE") autonat2.destination_intf(name="SZ-OUTSIDE1") autonat2.nat_policy(name=namer) # Autonat nat pool autonat3 = fmcapi.AutoNatRules(fmc=fmc) autonat3.original_network(name="_net_original_pool") autonat3.patPool(name="_net_xlate_pool") autonat3.source_intf(name="IG-INSIDE") autonat3.destination_intf(name="SZ-OUTSIDE1") autonat3.nat_policy(name=namer) # Autonat interface PAT autonat4 = fmcapi.AutoNatRules(fmc=fmc) autonat4.original_network(name="_net_original_intf") autonat4.natType = "DYNAMIC" autonat4.source_intf(name="IG-INSIDE") autonat4.destination_intf(name="SZ-OUTSIDE1") autonat4.nat_policy(name=namer) autonat4.interfaceInTranslatedNetwork = True autonat1.post() autonat2.post() autonat3.post() autonat4.post() """ # Associate a nat policy to a device # Do not uncomment if you do not have a device registered to FMC # Use name of device or deviceHAPair as applicable pol_devices = [{"name": "deviceHAName", "type": "deviceHAPair"}] assign1 = fmcapi.PolicyAssignments(fmc=fmc) assign1.ftd_natpolicy(name=namer, devices=pol_devices) assign1.post() assign1.ftd_natpolicy(name=namer, devices=[]) assign1.put() """ natpol1.delete() obj1.delete() obj2.delete() obj3.delete() obj4.delete() obj5.delete() obj6.delete() sz1.delete() sz2.delete()
def test__manualnat(fmc): logging.info("Testing ManualNatRules class.") starttime = str(int(time.time())) namer = f"_fmcapi_test_{starttime}" # Create a container policy for FTD NAT rules natpol1 = fmcapi.FTDNatPolicies(fmc=fmc, name=namer) natpol1.post() natpol1.get() # Create original and translate objects obj1 = fmcapi.Networks(fmc=fmc) obj1.name = "_net_original" obj1.value = "10.0.0.0/8" obj1.post() time.sleep(1) obj2 = fmcapi.Hosts(fmc=fmc) obj2.name = "_net_xlate" obj2.value = "192.0.2.1" obj2.post() time.sleep(1) # Create identity nat object obj3 = fmcapi.Networks(fmc=fmc) obj3.name = "_net_identity" obj3.value = "192.168.0.0/24" obj3.post() time.sleep(1) # Create nat pool objects obj4 = fmcapi.Networks(fmc=fmc) obj4.name = "_net_original_pool" obj4.value = "172.16.0.0/24" obj4.post() time.sleep(1) # PAT Pool must be a range, not a subnet obj5 = fmcapi.Ranges(fmc=fmc) obj5.name = "_net_xlate_pool" obj5.value = "192.0.2.128-192.0.2.254" obj5.post() time.sleep(1) # Create interface PAT object obj6 = fmcapi.Networks(fmc=fmc) obj6.name = "_net_original_intf" obj6.value = "192.168.1.0/24" obj6.post() # Create NAT divert objects obj7 = fmcapi.Hosts(fmc=fmc) obj7.name = "_net_source_divert" obj7.value = "172.30.1.1" obj7.post() time.sleep(1) obj8 = fmcapi.Hosts(fmc=fmc) obj8.name = "_net_destination_divert" obj8.value = "4.2.2.2" obj8.post() time.sleep(1) # Create port-based NAT objects obj9 = fmcapi.Hosts(fmc=fmc) obj9.name = "_net_source_portbased" obj9.value = "172.30.1.2" obj9.post() time.sleep(1) obj10 = fmcapi.Hosts(fmc=fmc) obj10.name = "_net_xlate_portbased" obj10.value = "192.0.2.254" obj10.post() time.sleep(1) obj11 = fmcapi.ProtocolPortObjects(fmc=fmc) obj11.name = "_port_original" obj11.protocol = "TCP" obj11.port = "443" obj11.post() time.sleep(1) obj12 = fmcapi.ProtocolPortObjects(fmc=fmc) obj12.name = "_port_xlate" obj12.protocol = "TCP" obj12.port = "8443" obj12.post() time.sleep(1) # Create Security Zones sz1 = fmcapi.SecurityZones(fmc=fmc, name="IG-INSIDE") sz1.post() sz2 = fmcapi.SecurityZones(fmc=fmc, name="SZ-OUTSIDE1") sz2.post() # Manualnat a network object to a host manualnat1 = fmcapi.ManualNatRules(fmc=fmc) manualnat1.original_source(name="_net_original") manualnat1.translated_source(name="_net_xlate") manualnat1.natType = "STATIC" # Source and destination interface can be either an interface group or security zone manualnat1.source_intf(name="IG-INSIDE") manualnat1.destination_intf(name="SZ-OUTSIDE1") manualnat1.enabled = True manualnat1.nat_policy(name=namer) # Manualnat identity nat manualnat2 = fmcapi.ManualNatRules(fmc=fmc) manualnat2.identity_nat(name="_net_identity") manualnat2.source_intf(name="IG-INSIDE") manualnat2.destination_intf(name="SZ-OUTSIDE1") manualnat2.enabled = True manualnat2.nat_policy(name=namer) # Manualnat nat pool manualnat3 = fmcapi.ManualNatRules(fmc=fmc) manualnat3.original_source(name="_net_original_pool") manualnat3.patPool(name="_net_xlate_pool") manualnat3.source_intf(name="IG-INSIDE") manualnat3.destination_intf(name="SZ-OUTSIDE1") manualnat3.enabled = True manualnat3.nat_policy(name=namer) # Manualnat interface PAT manualnat4 = fmcapi.ManualNatRules(fmc=fmc) manualnat4.original_source(name="_net_original_intf") manualnat4.natType = "DYNAMIC" manualnat4.unidirectional = True manualnat4.source_intf(name="IG-INSIDE") manualnat4.destination_intf(name="SZ-OUTSIDE1") manualnat4.nat_policy(name=namer) manualnat4.enabled = True manualnat4.interfaceInTranslatedSource = True # Manualnat divert manualnat5 = fmcapi.ManualNatRules(fmc=fmc) manualnat5.identity_nat(name="_net_source_divert") manualnat5.original_destination(name="_net_destination_divert") manualnat5.source_intf(name="IG-INSIDE") manualnat5.destination_intf(name="SZ-OUTSIDE1") manualnat5.enabled = True manualnat5.nat_policy(name=namer) # Manualnat port-based manualnat6 = fmcapi.ManualNatRules(fmc=fmc) manualnat6.original_source(name="_net_source_portbased") manualnat6.original_source_port(name="_port_original") manualnat6.translated_source(name="_net_xlate_portbased") manualnat6.translated_source_port(name="_port_xlate") manualnat6.natType = "STATIC" manualnat6.source_intf(name="IG-INSIDE") manualnat6.destination_intf(name="SZ-OUTSIDE1") manualnat6.enabled = True manualnat6.nat_policy(name=namer) manualnat1.post() manualnat2.post() manualnat3.post() manualnat4.post() manualnat5.post() manualnat6.post() """ # Associate a nat policy to a device # Do not uncomment if you do not have a device registered to FPMC # Use name of device or deviceHAPair as applicable pol_devices = [{"name": "ftdv-HA", "type": "deviceHAPair"}] assign1 = PolicyAssignments(fmc=fmc) assign1.ftd_natpolicy(name=namer, devices=pol_devices) assign1.post() assign1.ftd_natpolicy(name=namer, devices=[]) assign1.put() """ logging.info("Cleanup of testing ManualNatRule methods.") natpol1.delete() obj1.delete() obj2.delete() obj3.delete() obj4.delete() obj5.delete() obj6.delete() obj7.delete() obj8.delete() obj9.delete() obj10.delete() obj11.delete() obj12.delete() sz1.delete() sz2.delete()