def updateDIYs(user_id, dev_id):
if user_id == 'empty' or dev_id == 'empty':
LOG.writeLn("user_id or dev_id is empty")
exit()
phpFileNm = "call_from_DIYs.php"
fileName = COM.gJsonDir + 'device.json'
f = open(fileName, 'r')
data = f.read()
print(data)
f.close()
url = 'https://frogmon.synology.me/svr_api/'
url = '%s%s' % (url, phpFileNm)
r = requests.post(url,
data={
'user_id': user_id,
'product_id': dev_id,
'status_json': data
})
print(r.url)
if (XMLPaser.getHeader(r.content) != 0):
LOG.writeLn("sendModuleStat send Error ")
else:
actionJson = XMLPaser.decodeAction(r.content)
if actionJson == '':
print('no Actions')
else:
GLOB.saveJsonData(COM.gJsonDir + 'action.json', actionJson)
def confUpdate(self):
self.sleep_period = int(
GLOB.readConfig(configFileNM, 'FLOWERCARE', 'period', '300'))
self.miflora_cache_timeout = self.sleep_period - 1
self.used_adapter = GLOB.readConfig(configFileNM, 'FLOWERCARE',
'adapter', 'hci0')
self.reporting_mode = 'json'
self.daemon_enabled = True
self.user_id = GLOB.readConfig(configFileNM, 'SETUP', 'user_id', '0')
self.device_id = GLOB.readConfig(configFileNM, 'AGENT', 'id', '0')
self.default_base_topic = 'miflora'
self.local_id = GLOB.readConfig(configFileNM, 'WEATHER', 'location0',
'')
# Check configuration
if self.reporting_mode not in [
'mqtt-json', 'mqtt-homie', 'json', 'mqtt-smarthome',
'homeassistant-mqtt', 'thingsboard-json', 'wirenboard-mqtt'
]:
LOG.writeLn(
'Configuration parameter reporting_mode set to an invalid value '
)
sys.exit(1)
if (self.device_id == '0' or self.user_id == '0'):
LOG.writeLn('setup.ini file load error')
sys.exit(1)
#LOG.writeLn('Configuration accepted')
print('** USER = %s' % self.user_id)
print('** PRODUCT = %s' % self.device_id)
print('** interval = %d' % self.sleep_period)
print('** location = %s' % self.local_id)
print('--------------------------------------------------')
print('')
def encodeStatJson(self, fileNM, data):
rc = -1
try:
dict = json.loads('{}')
dict['DEV_ID'] = data[0]
dict['MODE'] = data[1]
dict['ALARM'] = data[2]
dict['TEMP'] = data[3]
dict['HUMI'] = data[4]
dict['MOIST'] = data[5]
dict['COND'] = data[6]
dict['CDS'] = data[7]
dict['BATTERY'] = data[8]
dict['REMOTE'] = data[9]
dict['LIGHT'] = data[10]
dict['PUMP'] = data[11]
dict['FAN'] = data[12]
dict['HEATER'] = data[13]
dict['LASTUPDT'] = data[14]
dict['TEAMVIEWER'] = data[15]
dict['LOCAL_IP'] = GLOB.get_ip_address()
print(json.dumps(dict, ensure_ascii=False, indent="\t"))
#os.remove(fileNM)
with open(fileNM, 'w', encoding='utf-8') as make_file:
json.dump(dict, make_file, ensure_ascii=False, indent="\t")
print("out values [%s,%s,%s,%s,%s]" %
(data[9], data[10], data[11], data[12], data[13]))
rc = 0
except Exception as e:
LOG.writeLn("[ERROR]: %s" % e)
return rc
def chkSensor(self):
for [name, mac] in GLOB.itemConfig(configFileNM, 'DEVICE'):
if not GLOB.isMacAddress(mac):
LOG.writeLn(
'The MAC address "{}" seems to be in the wrong format. Please check your configuration'
)
sys.exit(1)
if '@' in name:
name_pretty, location_pretty = name.split('@')
else:
name_pretty, location_pretty = name, ''
name_clean = GLOB.clean_identifier(name_pretty)
location_clean = GLOB.clean_identifier(location_pretty)
flora = dict()
print('Adding sensor to device list and testing connection ...')
print('Name: "{}"'.format(name_pretty))
#print_line('Attempting initial connection to Mi Flora sensor "{}" ({})'.format(name_pretty, mac), console=False, sd_notify=True)
flora_poller = MiFloraPoller(
mac=mac,
backend=GatttoolBackend,
cache_timeout=self.miflora_cache_timeout,
retries=3,
adapter=self.used_adapter)
flora['poller'] = flora_poller
flora['name_pretty'] = name_pretty
flora['mac'] = flora_poller._mac
flora['refresh'] = self.sleep_period
flora['location_clean'] = location_clean
flora['location_pretty'] = location_pretty
flora['stats'] = {"count": 0, "success": 0, "failure": 0}
try:
flora_poller.fill_cache()
flora_poller.parameter_value(MI_LIGHT)
flora['firmware'] = flora_poller.firmware_version()
except (IOError, BluetoothBackendException):
LOG.writeLn(
'Initial connection to Mi Flora sensor "{}" ({}) failed.')
else:
print('Internal name: "{}"'.format(name_clean))
print('Device name: "{}"'.format(flora_poller.name()))
print('MAC address: {}'.format(flora_poller._mac))
print('Firmware: {}'.format(flora_poller.firmware_version()))
#LOG.writeLn('Initial connection to Mi Flora sensor "{}" ({}) successful')
print()
self.flores[name_clean] = flora
return self.flores
def copyFileList(srcPath, destPath):
print("copyFileList (%s=>%s)" % (srcPath, destPath))
if not GLOB.folderExitst(srcPath):
return False
try:
files = os.listdir(destPath)
print(files)
for afile in files:
os.remove(destPath + afile)
files = os.listdir(srcPath)
for afile in files:
shutil.copy(srcPath + afile, destPath + afile)
return True
except Exception as e:
LOG.writeLn("[face_copy ERROR]: %s" % e)
return False
def makeJson():
data = {}
data['DEV_ID'] = mProduct_id
data['VERSION'] = mVersion
data['INTERVAL'] = mInterval_sec
data['RES_X'] = mResolution_x
data['RES_Y'] = mResolution_y
data['ROTATION'] = mRotation
data['START_TIME'] = mStart_time
data['END_TIME'] = mEnd_time
data['DAY_COUNT'] = mCount
data['LOCAL_IP'] = GLOB.get_ip_address()
LOG.writeLn('json file save:%s' % COM.gJsonDir + 'device.json')
with open(COM.gJsonDir + 'device.json', 'w',
encoding='utf-8') as make_file:
json.dump(data, make_file, indent="\t")
def jsonAppend(fileNM, name):
rc = -1
try:
if GLOB.fileExist(fileNM):
with open(fileNM, 'a', encoding='utf-8') as f:
data = ', {"DOOR_OPEN_TIME" : "%s", "NAME" : "%s" }' % (
COM.gstrYMDHMS, name)
f.write(data)
else:
with open(fileNM, 'w', encoding='utf-8') as f:
data = '{"DOOR_OPEN_TIME" : "%s", "NAME" : "%s" }' % (
COM.gstrYMDHMS, name)
f.write(data)
rc = 0
except Exception as e:
LOG.writeLn("[jsonAppend ERROR]: %s" % e)
return rc
def callWeather(local_id):
if local_id == '' or local_id == 'empty':
LOG.writeLn("[callWeather] local_id is empty")
exit()
phpFileNm = "get_weather_info.php"
url = 'http://frogmon.synology.me/svr_api/'
url = "%s%s?position=%s" % (url, phpFileNm, local_id)
try:
r = requests.get(url=url, timeout=3)
#print(r.url)
#print('--------------------')
#s = r.content.decode("UTF-8").strip()
#print(s)
return XMLPaser.decodeWeather(r.content)
except:
LOG.writeLn("[callWeather] Error : %s" % r.url)
def on_message(client, userdata, msg):
strJson = msg.payload.decode()
#print(msg.topic+" "+str(msg.payload)) #토픽과 메세지를 출력한다.
LOG.writeLn("[MQTT] "+ msg.topic+" "+ strJson) #토픽과 메세지를 출력한다.
try:
if GLOB.saveJsonData(COM.gJsonDir+"action.json", strJson) == 0:
remote = '0'
grp1 = GLOB.getJsonVal(strJson, 'light', '99')
if (grp1 != '99') :
GLOB.writeConfig(controlFileNM, 'CONTROL', 'light', grp1)
remote = '1'
grp2 = GLOB.getJsonVal(strJson, 'heater', '99')
if (grp2 != '99') :
GLOB.writeConfig(controlFileNM, 'CONTROL', 'heater', grp2)
remote = '1'
grp3 = GLOB.getJsonVal(strJson, 'fan', '99')
if (grp3 != '99') :
GLOB.writeConfig(controlFileNM, 'CONTROL', 'fan', grp3)
remote = '1'
grp4 = GLOB.getJsonVal(strJson, 'pump', '99')
if (grp4 != '99') :
GLOB.writeConfig(controlFileNM, 'CONTROL', 'pump', grp4)
remote = '1'
active = GLOB.getJsonVal(strJson, 'active', '99')
if (active != '99') :
remote = active
GLOB.writeConfig(controlFileNM, 'CONTROL', 'active', remote)
#print("grp data %s %s" % (grp1, grp2))
if GLOB.appendWATERsControlInfo(COM.gJsonDir+"device.json", GLOB.readConfig(controlFileNM, 'CONTROL', 'active', '0')
, GLOB.readConfig(controlFileNM, 'CONTROL', 'light', '0')
, GLOB.readConfig(controlFileNM, 'CONTROL', 'pump', '0')
, GLOB.readConfig(controlFileNM, 'CONTROL', 'fan', '0')
, GLOB.readConfig(controlFileNM, 'CONTROL', 'heater', '0')
) == 0 :
REQUEST.updateDIYs(user_id, dev_id)
except Exception as e :
LOG.writeLn("[MQTT] : error : %s" % e)
def callPollution(local_id):
if local_id == '' or local_id == 'empty':
LOG.writeLn("[callPollution] local_id is empty")
exit()
phpFileNm = "seindex.php"
url = 'http://58.229.176.179/'
url = "%s%s?position=%s" % (url, phpFileNm, local_id)
try:
r = requests.get(url=url, timeout=3)
#print(r.url)
#print('--------------------')
s = r.content.decode("UTF-8")
s = s.replace('<h1>', '')
s = s.replace('</h1>', '')
s = s.replace(' ', '')
rc = s.split(',')
return rc
except:
LOG.writeLn("[callPollution] Error : %s" % r.url)
def on_message(client, userdata, msg):
strJson = msg.payload.decode()
LOG.writeLn("[MQTT] " + msg.topic + " " + strJson) #토픽과 메세지를 출력한다.
try:
if GLOB.saveJsonData(COM.gJsonDir + "action.json", strJson) == 0:
remote = '0'
grp1 = GLOB.getJsonVal(strJson, 'interval', '0')
if (grp1 != '0'):
GLOB.writeConfig(configFileNM, 'SETUP', 'interval', grp1)
remote = '1'
grp2 = GLOB.getJsonVal(strJson, 'resolution_x', '0')
if (grp2 != '0'):
GLOB.writeConfig(configFileNM, 'SETUP', 'resolution_x', grp2)
remote = '1'
grp3 = GLOB.getJsonVal(strJson, 'resolution_y', '0')
if (grp3 != '0'):
GLOB.writeConfig(configFileNM, 'SETUP', 'resolution_y', grp3)
remote = '1'
grp4 = GLOB.getJsonVal(strJson, 'rotation', '99')
if (grp4 != '99'):
GLOB.writeConfig(configFileNM, 'SETUP', 'rotation', grp4)
remote = '1'
grp5 = GLOB.getJsonVal(strJson, 'start_time', '99')
if (grp5 != '99'):
GLOB.writeConfig(configFileNM, 'SETUP', 'start_time', grp5)
remote = '1'
grp6 = GLOB.getJsonVal(strJson, 'end_time', '99')
if (grp6 != '99'):
GLOB.writeConfig(configFileNM, 'SETUP', 'end_time', grp6)
remote = '1'
print('grps = %s %s %s %s %s %s [%s]' %
(grp1, grp2, grp3, grp4, grp5, grp6, remote))
if remote == '1':
if GLOB.appendTIMELAPsControlInfo(
COM.gJsonDir + "device.json",
GLOB.readConfig(configFileNM, 'SETUP', 'interval',
'0'),
GLOB.readConfig(configFileNM, 'SETUP', 'resolution_x',
'0'),
GLOB.readConfig(configFileNM, 'SETUP', 'resolution_y',
'0'),
GLOB.readConfig(configFileNM, 'SETUP', 'rotation',
'0'),
GLOB.readConfig(configFileNM, 'SETUP', 'start_time',
'0'),
GLOB.readConfig(configFileNM, 'SETUP', 'end_time',
'0')) == 0:
REQUEST.updateDIYs(user_id, dev_id)
LOG.writeLn("[MQTT] Command recive and reboot in 3 sec")
time.sleep(3)
GLOB.run_command("sudo reboot")
except Exception as e:
LOG.writeLn("[MQTT] : error : %s" % e)
def on_connect(client, userdata, flags, rc):
LOG.writeLn("[MQTT] Connected with result code "+str(rc))
#client.subscribe("$SYS/#")
client.subscribe("%s" % mSub_nm) #구독 "nodemcu"
if GLOB.appendWATERsControlInfo(COM.gJsonDir+"device.json", GLOB.readConfig(controlFileNM, 'CONTROL', 'active', '0')
, GLOB.readConfig(controlFileNM, 'CONTROL', 'light', '0')
, GLOB.readConfig(controlFileNM, 'CONTROL', 'pump', '0')
, GLOB.readConfig(controlFileNM, 'CONTROL', 'fan', '0')
, GLOB.readConfig(controlFileNM, 'CONTROL', 'heater', '0')
) == 0 :
REQUEST.updateDIYs(user_id, dev_id)
except Exception as e :
LOG.writeLn("[MQTT] : error : %s" % e)
print('')
print('--------------------------------------------------')
print('** Welcome to FROGMON corp.')
print("** Let's make it together")
print("** ")
print('** USER = %s' % user_id)
print('** PRODUCT = %s' % dev_id)
print('** CHNNEL_ID = %s' % mSub_nm)
print('--------------------------------------------------')
print('')
client = mqtt.Client() #client 오브젝트 생성
client.on_connect = on_connect #콜백설정
client.on_message = on_message #콜백설정
try:
client.connect(mSvr_addr, int(mSvr_port), 60) #라즈베리파이3 MQTT 브로커에 연결
client.loop_forever()
except Exception as e :
LOG.writeLn("[MQTT] : error : %s" % e)
print('** NOW times = %s' % COM.gstrYMDHMS)
print('** INTERVAL = %s' % mInterval_sec)
print('** RES_X = %s' % mResolution_x)
print('** RES_Y = %s' % mResolution_y)
print('** ROTATION = %s' % mRotation)
print('** START_TIME = %s' % mStart_time)
print('** END_TIME = %s' % mEnd_time)
print('--------------------------------------------------')
print('')
# pi camera Setting
camera = PiCamera()
camera.resolution = (mResolution_x, mResolution_y)
camera.rotation = mRotation
LOG.writeLn("[timeLapse] process run")
# Main Process
while True:
try:
GLOB.setUpdateTime()
GLOB.appendTIMELAPsControlInfo(COM.gJsonDir + "device.json",
mInterval_sec, mResolution_x,
mResolution_y, mRotation, mStart_time,
mEnd_time)
REQUEST.updateDIYs(mUser_id, mProduct_id)
if (int(COM.gHH) >= mStart_time) and (int(COM.gHH) <= mEnd_time):
camera.start_preview()
imgFileNm = COM.gHomeDir + 'pictures/pic_%s.jpg' % COM.gstrYMDHMS
# make picture
camera.capture(imgFileNm)
camera.stop_preview()
from frogmon.uCommon import COM
from frogmon.uLogger import LOG
from frogmon.uGlobal import GLOB
GLOB.directoryInit('pi', "DOORs")
metrixImg = COM.gHomeDir + "metrix.png"
camera = PiCamera()
camera.resolution = (320, 180)
camera.rotation = 180
print('')
print('--------------------------------------------------')
print('** Welcome to FROGMON corp.')
print("** Let's make it together")
print("** ")
print('** Image File = %s' % metrixImg)
print('--------------------------------------------------')
print('')
LOG.writeLn("[doorImage] process run")
while True:
try:
camera.start_preview()
sleep(0.5)
camera.capture(metrixImg)
#LOG.writeLn("[doorImage] get picture")
camera.stop_preview()
except Exception as e:
LOG.writeLn("[doorImage] Error : %s" % e)
def atOnce(self):
self.chkSensor()
GLOB.setUpdateTime()
self.confUpdate()
for [flora_name, flora] in self.flores.items():
data = dict()
attempts = 2
flora['poller']._cache = None
flora['poller']._last_read = None
flora['stats']['count'] = flora['stats']['count'] + 1
#print_line('Retrieving data from sensor "{}" ...'.format(flora['name_pretty']))
while attempts != 0 and not flora['poller']._cache:
try:
flora['poller'].fill_cache()
flora['poller'].parameter_value(MI_LIGHT)
except (IOError, BluetoothBackendException):
attempts = attempts - 1
if attempts > 0:
LOG.writeLn('Retrying ...')
flora['poller']._cache = None
flora['poller']._last_read = None
if not flora['poller']._cache:
flora['stats']['failure'] = flora['stats']['failure'] + 1
LOG.writeLn(
'Failed to retrieve data from Mi Flora sensor "{}" ({}), success rate: {:.0%}'
.format(
flora['name_pretty'], flora['mac'],
flora['stats']['success'] / flora['stats']['count']))
print()
continue
else:
flora['stats']['success'] = flora['stats']['success'] + 1
for param, _ in mParameters.items():
data[param] = flora['poller'].parameter_value(param)
rc = -1
try:
data['timestamp'] = COM.gstrDATE
data['name'] = flora_name
data['name_pretty'] = flora['name_pretty']
data['mac'] = flora['mac']
data['firmware'] = flora['firmware']
#print('Data for "{}": {}'.format(flora_name, json.dumps(data)))
with open(COM.gJsonDir + flora_name + '.json',
'w',
encoding="utf-8") as make_file:
json.dump(data, make_file, ensure_ascii=False, indent="\t")
#to make device.json file
datas = []
datas.append(self.device_id)
datas.append(GLOB.readConfig(configFileNM, 'SETUP', 'mod', ''))
datas.append(
GLOB.readConfig(configFileNM, 'AGENT', 'alarm', '0'))
datas.append(str(data['temperature']))
datas.append('0')
datas.append(str(data['moisture']))
datas.append(str(data['conductivity']))
datas.append(str(data['light']))
datas.append(str(data['battery']))
datas.append(
GLOB.readConfig(controlFileNM, 'CONTROL', 'active',
'0')) # active
datas.append(
GLOB.readConfig(controlFileNM, 'CONTROL', 'light',
'0')) # LED 조명
datas.append(
GLOB.readConfig(controlFileNM, 'CONTROL', 'pump',
'0')) # 워터펌프
datas.append(
GLOB.readConfig(controlFileNM, 'CONTROL', 'fan', '0')) # 팬
datas.append(
GLOB.readConfig(controlFileNM, 'CONTROL', 'heater',
'0')) # 히터
datas.append(COM.gstrYMDHMS)
datas.append(GLOB.loadTeamviewerID())
rc = self.encodeStatJson(COM.gJsonDir + 'device.json', datas)
if rc == 0:
LOG.writeLn(
'%s [%s] %s %s %s %s %s' %
(data['name'], data['battery'], data['temperature'],
data['moisture'], data['light'], data['conductivity'],
data['mac']))
except Exception as e:
LOG.writeLn("[ERROR][FLOWERCARE] : %s" % e)
if rc == 0:
if GLOB.appendWATERsControlInfo(
COM.gJsonDir + "device.json",
GLOB.readConfig(controlFileNM, 'CONTROL', 'active',
'0'),
GLOB.readConfig(controlFileNM, 'CONTROL', 'light',
'0'),
GLOB.readConfig(controlFileNM, 'CONTROL', 'pump', '0'),
GLOB.readConfig(controlFileNM, 'CONTROL', 'fan', '0'),
GLOB.readConfig(controlFileNM, 'CONTROL', 'heater',
'0')) == 0:
REQUEST.updateDIYs(self.user_id, self.device_id)
print('')
print('--------------------------------------------------')
print('** Welcome to FROGMON corp.')
print("** Let's make it together")
print("** ")
print("** face path check : %s" % path)
print("** faceLog Path check : %s" % faceLogPath)
print("** metrixImg path check : %s" % metrixImg)
print(file_list)
print('--------------------------------------------------')
print('')
timer = 0
LOG.writeLn("[doorDetector] process run")
while True:
time.sleep(0.1)
if GLOB.fileExist(metrixImg):
timer = timer + 1
if timer > 600:
LOG.writeLn("[doorDetector] Alive Check (%d)" % mLstImgFileSize)
timer = 0
curntImgFileSize = os.path.getsize(metrixImg)
if (curntImgFileSize > 0) and (mLstImgFileSize != curntImgFileSize):
mLstImgFileSize = curntImgFileSize
GLOB.setUpdateTime()
GPIO.output(led_pin, 0)
try:
detectFace = 0
STAT_FAN = 0
STAT_HEATER = 0
cntLoadError = 0
def clearControlFile():
GLOB.writeConfig(controlFileNM, 'CONTROL', 'light' , '0')
GLOB.writeConfig(controlFileNM, 'CONTROL', 'pump' , '0')
GLOB.writeConfig(controlFileNM, 'CONTROL', 'fan' , '0')
GLOB.writeConfig(controlFileNM, 'CONTROL', 'heater', '0')
try:
GPIO.output(LIGHT, GPIO.HIGH)
time.sleep(1)
LOG.writeLn("[CONTROL] : h/w Control Start %s" % GLOB.readConfig(configFileNM, 'AGENT', 'id', '0'))
while (True):
time.sleep(1)
try:
STAT_LIGHT = int(GLOB.readConfig(controlFileNM, 'CONTROL', 'light' , '99')) #0:ON/OFF, 1: LED 켜기, 0: LED 끄기
STAT_PUMP = int(GLOB.readConfig(controlFileNM, 'CONTROL', 'pump' , '99')) #0:ON/OFF, 1: PUMP 켜기, 0: PUMP 끄기
STAT_FAN = int(GLOB.readConfig(controlFileNM, 'CONTROL', 'fan' , '99')) #0:ON/OFF, 1: FAN 켜기, 0: FAN 끄기
STAT_HEATER = int(GLOB.readConfig(controlFileNM, 'CONTROL', 'heater', '99')) #0:ON/OFF, 1: HEATER 켜기, 0: HEATER 끄기
if (max(STAT_LIGHT, STAT_PUMP, STAT_FAN, STAT_HEATER) == 99):
LOG.writeLn("[CONTROL] : config load error then continues")
cntLoadError = cntLoadError + 1
if (cntLoadError > 10) :
clearControlFile()
start_str = "UUID=\""
example_uuid = "6784-3407"
uuid_start = line.index(start_str) + len(start_str)
uuid_end = uuid_start + len(example_uuid)
return line[uuid_start:uuid_end]
checkDir = 0
while True:
time.sleep(1)
try:
output = run_command("sudo blkid | grep -v boot | grep -v mm")
if len(output) > 0:
# ['/dev/sda1: LABEL="KINGSTON" UUID="6784-3407" TYPE="vfat" PARTUUID="459720e1-01"']
for usb_device in output:
if not GLOB.folderExitst(mUsbDir):
run_command("sudo mkdir %s" % mUsbDir)
command = "sudo mount --uuid %s %s -o iocharset=utf8" % (
uuid_from_line(usb_device), mUsbDir)
print(command)
run_command(command)
break
if copyFileList("/mnt/usb_stick/faces/", mFaceDir):
LOG.writeLn("[face_copy]: Sucess!!")
time.sleep(5)
run_command("sudo reboot")
except Exception as e:
print("usb not detected or faces not found: %s" % e)