def __init__(self, plugin, frame):
GObject.__init__(self)
PropertyObject.__init__(self)
log.debug('Initializing FreezeFrame ' + frame)
self.plugin = plugin
self._frame = frame
self._pref_cbs = []
self._app_cbs = []
self._notebook_cbs = []
self._queue_cbs = []
self._obd_cbs = []
if plugin.app.prefs.get('imperial', False):
self._unit_standard = 'Imperial'
else:
self._unit_standard = 'Metric'
cb_id = plugin.app.prefs.add_watch('imperial',
self._notify_units_cb)
self._pref_cbs.append(('imperial', cb_id))
self._setup_gui()
self._setup_sensors()
self._get_supported_pids()
def start(self):
log.debug('CommandQueue.start')
if (self.device.connected):
if not self._working:
self._working = True
self.emit('state-changed', self._working)
self._execute_next_command()
def _read_result(self):
log.debug('entering ELMDevice._read_result')
timeout_count = 0
try:
buf = ''
while timeout_count <= MAX_TIMEOUT:
ch = self._serial.read(1)
if ch == '':
timeout_count += 1
if ch == '>':
break
else:
buf = buf + ch
if buf == '':
raise OBDPortError('PortIOFailed',
_('Read timeout from ') + self.port)
buf = buf.replace('\r\r', '')
return buf
except serial.SerialException:
raise OBDPortError('PortIOFailed',
_('Unable to read from ') + self.port)
return None
def atkw_success_cb(cmd, msg, args):
log.debug('in atkw_success_cb')
if not 'OK' in res:
log.debug('invalid response')
atkw_error_cb(cmd, res, args)
else:
self._read_supported_pids()
def _command_success_cb(self, cmd, result, args):
log.debug('entering CommandQueue._command_success_cb: %s' % cmd)
# We only care about the first result
result = result[0]
for item in cmd.list:
item.data = result
self._execute_next_command()
def _update_supported_views(self):
log.debug('in update_supported_views')
for view in self._views:
if view.command.command in self._supported_pids:
view.supported=True
view.active=True
else:
view.supported=False
view.active=False
def ate_success_cb(cmd, res, args):
log.debug('in ate_success_cb')
if not 'OK' in res:
log.debug('invalid response')
ate_error_cb(cmd, res, args)
else:
#if self.app.get('device.ignore-keywords'):
# self._send_command('atkw0', atkw_success_cb, atkw_error_cb)
#else:
self._read_supported_pids()
def _update_supported_views(self):
log.debug('in update_supported_views')
for views in (self.views, self.os_views):
for view in views:
if self.app.device:
if view.command.command in self.app.device.supported_commands:
view.supported=True
if view in self.os_views or view.command.command == '0101':
view.active=True
else:
view.supported=False
else:
view.supported=False
def _port_io_watch_cb(self, fd, condition, data=None):
log.debug('entering ELMDevice._port_io_watch_cb')
if condition & gobject.IO_HUP:
log.debug('received HUP signal')
self._sent_command = None
self._ret_cb = None
self._err_cb = None
self._cb_args = None
self.close()
return False
elif condition & gobject.IO_ERR:
log.debug('received ERR signal')
self._sent_command = None
self._ret_cb = None
self._err_cb = None
self._cb_args = None
self.close()
return False
elif condition & gobject.IO_IN:
try:
result = self._read_result()
self._parse_result(result)
except OBDPortError, e:
log.debug('CONDITION = IO_IN but reading times out. Error: %s' % e[0])
finally:
def decode_pids_from_bitstring(data, offset, suffix):
log.debug('entering decode_pids_from_bitstring')
pids = []
for item in data:
bitstr = sensor.hex_to_bitstr(item)
for i, bit in enumerate(bitstr):
if bit == "1":
pid = i + 1 + offset
if pid < 16:
pid_str = '020' + hex(pid)[2:] + suffix
else:
pid_str = '02' + hex(pid)[2:] + suffix
pids.append(pid_str.upper())
return pids
def decode_pids_from_bitstring(data, mode, offset, suffix=''):
log.debug('entering decode_pids_from_bitstring')
pids = []
decoded = decode_result(data)
for item in decoded:
bitstr = sensor.hex_to_bitstr(item)
for i, bit in enumerate(bitstr):
if bit == "1":
pid = i + 1 + offset
if pid < 16:
pid_str = mode + '0' + hex(pid)[2:] + suffix
else:
pid_str = mode + hex(pid)[2:] + suffix
pids.append(pid_str.upper())
return pids
def success_cb(cmd, data, args):
log.debug('entering zero_success_cb')
mode = cmd[:2]
offset = int(cmd[2:4])
self._supported_pids += decode_pids_from_bitstring(data, mode, offset)
next = '%d' % (offset + 20)
if mode + next in self._supported_pids:
self._send_command(mode + next, success_cb, error_cb)
else:
if len(modes):
mode = modes.pop()
self._send_command(mode + '00', success_cb, error_cb)
else:
log.info('supported pids: %s\n' % self._supported_pids)
if not self._connected:
self._connected = True
self.emit('connected', True)
self.emit('supported-pids-changed')
def decode_result(result):
log.debug('entering decode_result')
if not result:
raise OBDDataError('Data Read Error',
_('No data was received from the device'))
ret = []
result = string.split(result, "\r")
for data in result:
if data:
data = string.split(data)
data = string.join(data, '')
if data[:2] == '7F':
log.debug('we got back 7F which is an error')
else:
ret.append(data[4:])
return ret
def _deactivate_plugin(self, plugin):
instance = self._plugin_instance_from_string(plugin)
istr = str(instance)
if instance.action_group:
self.app.ui.remove_action_group(instance.action_group)
if instance.merge_id:
self.app.ui.remove_ui(instance.merge_id)
if hasattr(instance, 'unload'):
instance.unload()
del instance
for item in self._active_plugins:
string, i = item
if string == plugin:
self._active_plugins.remove(item)
log.info('Plugin deactivated: %s' % plugin)
log.debug('Plugin deactivated: %s' % istr)
def update(self):
log.debug('entering FreezeFrame.update')
for view in self._views:
if view.supported:
self.plugin.app.queue.add(view.command, True)
self.plugin.app.queue.start()
def unload(self):
self.app.notebook.remove(self)
for name, cb_id in self._pref_cbs:
self.plugin.app.prefs.remove_watch(name, cb_id)
for cb_id in self._app_cbs:
self.plugin.app.disconnect(cb_id)
for cb_id in self._notebook_cbs:
self.plugin.app.notebook.disconnect(cb_id)
for cb_id in self._queue_cbs:
self.plugin.app.queue.disconnect(cb_id)
for cb_id in self._obd_cbs:
self.plugin.app.device.disconnect(cb_id)
def atz_success_cb(cmd, res, args):
log.debug('in atz_success_cb')
if not 'ELM327' in res:
log.debug('invalid response')
atz_error_cb(cmd, res, None)
else:
log.debug('received answer valid')
self._send_command('ate0', ate_success_cb, ate_error_cb)
def _send_command(self, command, ret, err, cleanup=True, *args):
log.debug('entering ELMDevice._send_command: %s' % command)
if not self._serial.isOpen():
raise OBDPortError('PortNotOpen', _('The port is not open'))
self._cleanup_command = cleanup
self._sent_command = command
self._ret_cb = ret
self._err_cb = err
self._cb_args = args
try:
self._serial.flushOutput()
self._serial.flushInput()
self._serial.write(command)
self._serial.write("\r")
except serial.SerialException:
self._sent_command = None
self._ret_cb = None
self._err_cb = None
self._cb_args = None
self.close()
raise OBDPortError('PortIOFailed',
_('Unable to write to ') + self.port)
def _execute_next_command(self):
log.debug('entering CommandQueue._execute_next_command')
if self._working:
if len(self._queue):
queue_item = self._queue.pop(0)
if not queue_item.oneshot:
self._queue.append(queue_item)
else:
log.debug('CommandQueue: nothing in queue')
self.stop()
return
log.debug('CommandQueue: executing next command: %s' % queue_item )
self.device.read_command(queue_item,
self._command_success_cb,
self._command_error_cb)
self._sent_command = None
self._ret_cb = None
self._err_cb = None
self._cb_args = None
self.close()
return False
elif condition & gobject.IO_IN:
try:
result = self._read_result()
self._parse_result(result)
except OBDPortError, e:
log.debug('CONDITION = IO_IN but reading times out. Error: %s' % e[0])
finally:
return True
else:
log.debug('received an unknown io signal')
return False
def _read_supported_pids(self, modes=['09','01']):
def success_cb(cmd, data, args):
log.debug('entering zero_success_cb')
mode = cmd[:2]
offset = int(cmd[2:4])
self._supported_pids += decode_pids_from_bitstring(data, mode, offset)
next = '%d' % (offset + 20)
if mode + next in self._supported_pids:
self._send_command(mode + next, success_cb, error_cb)
else:
def atkw_error_cb(cmd, msg, args):
log.debug('in atkw_error_cb')
raise OBDPortError('OpenPortFailed',
_('atkw0 command failed'))
def stop(self):
log.debug('CommandQueue.stop')
if self._working:
self._working = False
self.emit('state-changed', self._working)
self._working = False
log.error('%s does not seem to be a valid Plugin' % instance)
instance = None
return None
try:
if instance.ui_info:
instance.merge_id = self.app.ui.add_ui_from_string(instance.ui_info)
self.app.ui.insert_action_group(instance.action_group, 0)
except gobject.GError, msg:
log.error('building menus failed: %s' % msg)
if hasattr(instance, 'load'):
instance.load()
log.info('Plugin activated: %s' % plugin)
log.debug(instance)
return instance
def _deactivate_plugin(self, plugin):
instance = self._plugin_instance_from_string(plugin)
istr = str(instance)
if instance.action_group:
self.app.ui.remove_action_group(instance.action_group)
if instance.merge_id:
self.app.ui.remove_ui(instance.merge_id)
if hasattr(instance, 'unload'):
instance.unload()
del instance
def _parse_result(self, data):
log.debug('entering ELMDevice._parse_result: %s' % data)
error = False
success = False
res = None
msg = None
cmd = self._sent_command
err_cb = self._err_cb
ret_cb = self._ret_cb
args = self._cb_args
if self._sent_command:
if data[0] == '>':
log.debug('command sent, received >')
error = True
elif data[0] == '?':
log.debug('command sent, received ?')
error = True
msg = '?'
elif 'ERROR' in data:
log.info('received ERROR')
error = True
msg = data
elif 'SEARCHING' in data:
log.info('received SEARCHING: resending command')
self._send_command(cmd, ret_cb, err_cb, args)
elif 'BUS INIT' in data:
log.info('received BUS INIT: resending command')
self._send_command(cmd, ret_cb, err_cb, args)
elif 'UNABLE TO CONNECT' in data:
log.debug('received UNABLE TO CONNECT')
error = True
msg = 'UNABLE TO CONNECT'
elif 'NO DATA' in data:
log.debug('received NO DATA')
error = True
msg = 'NO DATA'
else:
res = data
success = True
if self._cleanup_command:
self._err_cb = None
self._ret_cb = None
self._sent_command = None
self._cb_args = None
if error:
err_cb(cmd, msg, args)
if success:
ret_cb(cmd, data, args)
else:
# no command sent
# are we interested anyway?
if '>' in data:
log.debug('received >')
else:
log.debug('no command sent, received %s' % data)
def _command_error_cb(self, cmd, msg, args):
log.debug('CommandQueue._command_error_cb: command was: %s' % cmd)
log.debug('CommandQueue._command_error_cb: msg is %s' % msg)
if self._working:
self._execute_next_command()