def test_enabled_switchport_enabled(self):
Genie.testbed = Testbed()
dev1 = Device(name='PE1', os='iosxe')
intf1 = Interface(device=dev1, name='GigabitEthernet0/0/1')
# Defining attributes section
intf1.switchport_enable = True
intf1.enabled = True
# Check config
cfg = intf1.build_config(apply=False)
self.assertMultiLineEqual(
str(cfg), '\n'.join([
'interface GigabitEthernet0/0/1',
' no shutdown',
' switchport',
' exit',
]))
# Check unconfig
uncfg = intf1.build_unconfig(apply=False,
attributes={
"switchport_enable": True,
"enabled": True
})
self.assertMultiLineEqual(
str(uncfg), '\n'.join([
'interface GigabitEthernet0/0/1',
' shutdown',
' no switchport',
' exit',
]))
# Defining attributes section
intf1.switchport_enable = False
intf1.enabled = False
# Check config
cfg = intf1.build_config(apply=False)
self.assertMultiLineEqual(
str(cfg), '\n'.join([
'interface GigabitEthernet0/0/1',
' shutdown',
' no switchport',
' exit',
]))
# Check unconfig
uncfg = intf1.build_unconfig(apply=False,
attributes={
"switchport_enable": True,
"enabled": True
})
self.assertMultiLineEqual(
str(uncfg), '\n'.join([
'interface GigabitEthernet0/0/1',
' no shutdown',
' switchport',
' exit',
]))
def test_nve_interface(self):
# Set Genie Tb
testbed = Testbed()
Genie.testbed = testbed
# Device
dev1 = Device(name='BL1', testbed=testbed, os='nxos')
intf1 = Interface(name='nve1', device=dev1)
# Apply configuration
intf1.nve_host_reachability_protocol = NveInterface.HOST_REACHABILTY_PROTOCOL.bgp
intf1.nve_adv_virtual_rmac = True
intf1.nve_src_intf_loopback = 'loopback1'
intf1.nve_multisite_bgw_intf = 'loopback100'
intf1.nve_vni = 4096
intf1.nve_vni_associate_vrf = True
intf1.nve_vni_suppress_arp = True
intf1.nve_vni_multisite_ingress_replication = True
intf1.nve_vni_mcast_group = '233.1.1.1'
# Build config
cfgs = intf1.build_config(apply=False)
# Check config build correctly
self.assertMultiLineEqual(
str(cfgs), '\n'.join([
'interface nve1', ' host-reachability protocol bgp',
' advertise virtual-rmac', ' source-interface loopback1',
' multisite border-gateway interface loopback100',
' member vni 4096 associate-vrf', ' suppress-arp',
' multisite ingress-replication', ' mcast-group 233.1.1.1',
' exit', ' exit'
]))
# Build unconfig
uncfgs = intf1.build_unconfig(apply=False,
attributes={'nve_vni': '4096'})
# Check config build correctly
self.assertMultiLineEqual(
str(uncfgs),
'\n'.join(['interface nve1', ' no member vni 4096', ' exit']))
# Build unconfig
uncfgs = intf1.build_unconfig(
apply=False,
attributes={
'nve_host_reachability_protocol':
NveInterface.HOST_REACHABILTY_PROTOCOL.bgp,
'nve_vni':
'4096',
'nve_vni_suppress_arp':
True
})
# Check config build correctly
self.assertMultiLineEqual(
str(uncfgs), '\n'.join([
'interface nve1', ' no host-reachability protocol bgp',
' member vni 4096', ' no suppress-arp', ' exit', ' exit'
]))
def test_VlanInterface(self):
testbed = Genie.testbed = Testbed()
dev1 = Device(testbed=testbed, name='PE1', os='iosxe')
intf1 = Interface(name='Vlan100', device=dev1)
# Defining attributes section
intf1.mtu = 500
intf1.ipv4 = '201.0.12.1'
intf1.ipv4.netmask = '255.255.255.0'
intf1.ipv6 = '2001::12:1'
cfg = intf1.build_config(apply=False)
self.assertMultiLineEqual(
str(cfg), '\n'.join([
'interface Vlan100',
' ip address 201.0.12.1 255.255.255.0',
' ipv6 address 2001::12:1/128',
' mtu 500',
' exit',
]))
uncfg = intf1.build_unconfig(apply=False)
self.assertMultiLineEqual(str(uncfg), '\n'.join([
'no interface Vlan100',
]))
partial_uncfg = intf1.build_unconfig(apply=False, attributes="mtu")
self.assertMultiLineEqual(
str(partial_uncfg), '\n'.join([
'interface Vlan100',
' no mtu 500',
' exit',
]))
def test_TunnelTeInterface(self):
Genie.testbed = Testbed()
dev1 = Device(name='PE1', os='iosxe')
lo0 = Interface(device=dev1, name='Loopback0')
intf1 = Interface(device=dev1, name='GigabitEthernet0/0/1')
intf2 = Interface(device=dev1, name='GigabitEthernet0/0/2')
intf1.ipv4 = '1.2.3.4/32'
tun3 = Interface(device=dev1,
name='Tunnel101',
tunnel_mode='mpls traffic-eng')
# tun3 = TunnelTeInterface(device=dev1, name='Tunnel101')
self.assertTrue(isinstance(tun3, TunnelTeInterface))
self.assertEqual(tun3.interface_number, 101)
tun3.destination = intf1.ipv4.ip
tun3.autoroute_announce = True
tun3.ipv4_unnumbered_interface = dev1.interfaces['Loopback0']
tun3.add_path_option(1)
tun3.path_option_attr[1].dynamic = True
tun3.add_path_option(2)
tun3.path_option_attr[2].explicit_name = "exp_PE2_P1_PE1"
cfg = tun3.build_config(apply=False)
self.assertMultiLineEqual(
str(cfg), '\n'.join([
'interface Tunnel101',
' tunnel mode mpls traffic-eng',
' ip unnumbered Loopback0',
' tunnel destination 1.2.3.4',
' tunnel mpls traffic-eng autoroute announce',
' tunnel mpls traffic-eng path-option 1 dynamic',
' tunnel mpls traffic-eng path-option 2 explicit name exp_PE2_P1_PE1',
' exit',
]))
uncfg = tun3.build_unconfig(apply=False)
self.assertMultiLineEqual(str(uncfg), '\n'.join([
'no interface Tunnel101',
]))
partial_uncfg = tun3.build_unconfig(apply=False,
attributes='autoroute_announce')
self.assertMultiLineEqual(
str(partial_uncfg), '\n'.join([
'interface Tunnel101',
' no tunnel mpls traffic-eng autoroute announce',
' exit',
]))
partial_cfg1 = tun3.build_config(apply=False,
attributes='path_option_attr__2')
self.assertMultiLineEqual(
str(partial_cfg1), '\n'.join([
'interface Tunnel101',
' tunnel mpls traffic-eng path-option 2 explicit name exp_PE2_P1_PE1',
' exit',
]))
def test_EthernetInterface(self):
Genie.testbed = Testbed()
dev1 = Device(name='PE1', os='iosxe')
intf1 = Interface(device=dev1, name='GigabitEthernet0/0/1')
intf1.ipv4 = '1.2.3.4/32'
intf1.auto_negotiation = True
cfg = intf1.build_config(apply=False)
self.assertMultiLineEqual(
str(cfg), '\n'.join([
'interface GigabitEthernet0/0/1',
' ip address 1.2.3.4 255.255.255.255',
' negotiation auto',
' exit',
]))
uncfg = intf1.build_unconfig(apply=False)
self.assertMultiLineEqual(
str(uncfg), '\n'.join([
'default interface GigabitEthernet0/0/1',
'interface GigabitEthernet0/0/1',
'shutdown',
]))
partial_uncfg1 = intf1.build_unconfig(apply=False,
attributes="auto_negotiation")
self.assertMultiLineEqual(
str(partial_uncfg1), '\n'.join([
'interface GigabitEthernet0/0/1',
' default negotiation auto',
' exit',
]))
partial_uncfg2 = intf1.build_unconfig(apply=False, attributes="ipv4")
self.assertMultiLineEqual(
str(partial_uncfg2), '\n'.join([
'interface GigabitEthernet0/0/1',
' no ip address 1.2.3.4 255.255.255.255',
' exit',
]))
# FiftyGig interface
intf2 = Interface(device=dev1, name='FiftyGigE6/0/1')
intf2.ipv4 = '10.20.30.40/24'
intf2.shutdown = False
cfg = intf2.build_config(apply=False)
self.assertMultiLineEqual(
str(cfg), '\n'.join([
'interface FiftyGigE6/0/1',
' ip address 10.20.30.40 255.255.255.0', ' no shutdown',
' exit'
]))
uncfg = intf2.build_unconfig(apply=False)
self.assertMultiLineEqual(
str(uncfg), '\n'.join([
'default interface FiftyGigE6/0/1', 'interface FiftyGigE6/0/1',
'shutdown'
]))
def test_uncfg_interface(self):
# For failures
self.maxDiff = None
# Set Genie Tb
testbed = Testbed()
Genie.testbed = testbed
# Device
dev1 = Device(name='PE1', testbed=testbed, os='nxos')
intf1 = Interface(name='Ethernet3/7', device=dev1)
intf2 = Interface(name='Vlan100', device=dev1)
# vrf = Vrf(name='test', testbed=testbed)
# dev1.add_feature(vrf)
# make intf2 as L2 interface
intf2.mtu = 500
intf1.mtu = 500
# Build config
cfgs = intf1.build_config(apply=False)
# Check config build correctly
self.assertMultiLineEqual(
str(cfgs),
'\n'.join([
'interface Ethernet3/7',
' mtu 500',
' exit'
]))
cfgs = intf2.build_config(apply=False)
# Check config build correctly
self.assertMultiLineEqual(
str(cfgs),
'\n'.join([
'interface Vlan100',
' mtu 500',
' exit'
]))
# Build unconfig
uncfgs = intf1.build_unconfig(apply=False)
# Check config build correctly
self.assertMultiLineEqual(
str(uncfgs),
'\n'.join([
'default interface Ethernet3/7',
]))
uncfgs = intf2.build_unconfig(apply=False)
# Check config build correctly
self.assertMultiLineEqual(
str(uncfgs),
'\n'.join([
'no interface Vlan100',
]))
def test_ipv4_multiple_lines_confg(self):
# For failures
self.maxDiff = None
# Set Genie Tb
testbed = Testbed()
Genie.testbed = testbed
# Device
dev1 = Device(name='PE1', testbed=testbed, os='nxos')
intf1 = Interface(name='Ethernet3/7', device=dev1, \
aliases=['PE1_1'])
vrf = Vrf(name='test', testbed=testbed)
dev1.add_feature(vrf)
# Apply configuration
intf1.description = 'multiple lines config'
ipv4a = IPv4Addr(device=dev1)
ipv4a.ipv4 = IPv4Address('192.168.1.1')
ipv4a.prefix_length = '24'
intf1.add_ipv4addr(ipv4a)
ipv4b = IPv4Addr(device=dev1)
ipv4b.ipv4 = IPv4Address('192.168.1.2')
ipv4b.prefix_length = '24'
ipv4b.ipv4_secondary = True
intf1.add_ipv4addr(ipv4b)
intf1.shutdown = False
# make intf2 as L3 interface
intf1.switchport_enable = False
# Build config
cfgs = intf1.build_config(apply=False)
# Check config build correctly
self.assertMultiLineEqual(
str(cfgs),
'\n'.join([
'interface Ethernet3/7',
' description multiple lines config',
' no shutdown',
' no switchport',
' ip address 192.168.1.1/24',
' ip address 192.168.1.2/24 secondary',
' exit'
]))
# Build unconfig
uncfgs = intf1.build_unconfig(apply=False, attributes={'switchport_enable': True,
'description': True,
'shutdown': True})
# Check config build correctly
self.assertMultiLineEqual(
str(uncfgs),
'\n'.join([
'interface Ethernet3/7',
' no description',
' shutdown',
' switchport',
' exit'
]))
def test_tunnelencryption_interface(self):
testbed = Genie.testbed = Testbed()
dev1 = Device(testbed=testbed, name='PE1', os='nxos')
intf1 = Interface(name='Ethernet0/0/1', device=dev1)
# Defining attributes section
intf1.evpn_multisite_dci_tracking = True
intf1.tunnel_encryption = True
cfg = intf1.build_config(apply=False)
self.assertMultiLineEqual(
str(cfg), '\n'.join([
'interface Ethernet0/0/1',
' evpn multisite dci-tracking',
' tunnel-encryption',
' exit',
]))
partial_uncfg = intf1.build_unconfig(apply=False,
attributes={
"tunnel_encryption":
True,
"evpn_multisite_dci_tracking":
True,
})
self.assertMultiLineEqual(
str(partial_uncfg), '\n'.join([
'interface Ethernet0/0/1',
' no evpn multisite dci-tracking',
' no tunnel-encryption',
' exit',
]))
def test_ethernet(self):
testbed = Testbed()
Genie.testbed = Testbed()
dev1 = Device(name='PE1', os='ios')
intf1 = Interface(device=dev1, name='GigabitEthernet0/0/1')
# Defining attributes section
intf1.description = 'test desc'
intf1.enabled = True
# Check config
cfg = intf1.build_config(apply=False)
self.assertMultiLineEqual(
str(cfg), '\n'.join([
'interface GigabitEthernet0/0/1',
' description test desc',
' no shutdown',
' exit',
]))
# Check unconfig without attribtues
uncfg = intf1.build_unconfig(apply=False)
self.assertMultiLineEqual(
str(uncfg), '\n'.join([
'default interface GigabitEthernet0/0/1',
]))
def test_nve_interface_simple(self):
# Set Genie Tb
testbed = Testbed()
Genie.testbed = testbed
# Device
dev1 = Device(name='BL1', testbed=testbed, os='nxos')
intf1 = Interface(name='nve1', device=dev1)
# Apply configuration
intf1.enabled = False
# Build config
cfgs = intf1.build_config(apply=False)
# Check config build correctly
self.assertMultiLineEqual(
str(cfgs), '\n'.join(['interface nve1', ' shutdown', ' exit']))
# Build unconfig
uncfgs = intf1.build_unconfig(apply=False,
attributes={'enabled': {
False: None
}})
# Check config build correctly
self.assertMultiLineEqual(
str(uncfgs), '\n'.join(['interface nve1', ' no shutdown',
' exit']))
def test_NveInterface_L3vni(self):
testbed = Genie.testbed = Testbed()
dev1 = Device(testbed=testbed, name='PE1', os='iosxe')
intf1 = Interface(name='nve1', device=dev1)
# Defining attributes section
intf1.nve_bgp_host_reachability = True
intf1.nve_src_intf_loopback = 'Loopback0'
intf1.nve_vni = '30000'
intf1.nve_vni_vrf = 'red'
# Build config
cfg = intf1.build_config(apply=False)
self.assertMultiLineEqual(
str(cfg), '\n'.join([
'interface nve1', ' host-reachability protocol bgp',
' source-interface Loopback0', ' member vni 30000 vrf red',
' exit'
]))
# Build unconfig
uncfg = intf1.build_unconfig(apply=False,
attributes={'nve_vni': '20000'})
# Check config build correctly
self.assertMultiLineEqual(
str(uncfg),
'\n'.join(['interface nve1', ' no member vni 30000', ' exit']))
def test_EFPInterface(self):
Genie.testbed = Testbed()
dev1 = Device(name='PE1', os='iosxe')
intf1 = Interface(device=dev1, name='GigabitEthernet0/0/1')
efp = Interface(device=dev1,
name='GigabitEthernet0/0/1.20',
service_instance=20)
efp.eth_encap_val1 = 20
efp.rewrite_ingress = 'pop 1 symmetric'
cfg = efp.build_config(apply=False)
self.assertMultiLineEqual(
str(cfg), '\n'.join([
'interface GigabitEthernet0/0/1',
' service instance 20 ethernet',
' encapsulation dot1q 20',
' rewrite ingress tag pop 1 symmetric',
' exit',
' exit',
]))
uncfg = efp.build_unconfig(apply=False)
self.assertMultiLineEqual(
str(uncfg), '\n'.join([
'interface GigabitEthernet0/0/1',
' no service instance 20 ethernet',
' exit',
]))
def test_switchport_enable_config(self):
# For failures
self.maxDiff = None
# Set Genie Tb
testbed = Testbed()
Genie.testbed = testbed
# Device
dev1 = Device(name='PE1', testbed=testbed, os='nxos')
intf1 = Interface(name='Ethernet3/7', device=dev1, aliases=['PE1_1'])
vrf = Vrf(name='test', testbed=testbed)
dev1.add_feature(vrf)
# make intf2 as L2 interface
intf1.switchport_enable = True
# Build config
cfgs = intf1.build_config(apply=False)
# Check config build correctly
self.assertMultiLineEqual(
str(cfgs),
'\n'.join(['interface Ethernet3/7', ' switchport', ' exit']))
# Build unconfig
uncfgs = intf1.build_unconfig(apply=False)
# Check config build correctly
self.assertMultiLineEqual(
str(uncfgs), '\n'.join([
'default interface Ethernet3/7',
]))
def test_EthernetSubInterface(self):
"""Test subinterface support without usage of service_instance"""
Genie.testbed = Testbed()
dev1 = Device(name='PE1', os='iosxe')
sub_intf = Interface(device=dev1, name='GigabitEthernet0/0/1.20')
sub_intf.ipv4 = '10.10.0.1/24'
sub_intf.eth_encap_type1 = 'dot1q'
sub_intf.eth_encap_val1 = 20
cfg = sub_intf.build_config(apply=False)
self.assertMultiLineEqual(
str(cfg), '\n'.join([
'interface GigabitEthernet0/0/1.20',
' encapsulation dot1q 20',
' ip address 10.10.0.1 255.255.255.0',
' exit',
]))
uncfg = sub_intf.build_unconfig(apply=False)
self.assertMultiLineEqual(
str(uncfg), '\n'.join([
'no interface GigabitEthernet0/0/1.20',
]))
def test_vxlan_interface(self):
testbed = Genie.testbed = Testbed()
dev1 = Device(testbed=testbed, name='PE1', os='nxos')
intf1 = Interface(name='Ethernet0/0/1', device=dev1)
# Defining attributes section
intf1.evpn_multisite_fabric_tracking = True
intf1.evpn_multisite_dci_tracking = True
intf1.ip_forward = True
cfg = intf1.build_config(apply=False)
self.assertMultiLineEqual(
str(cfg), '\n'.join([
'interface Ethernet0/0/1',
' evpn multisite dci-tracking',
' evpn multisite fabric-tracking',
' ip forward',
' exit',
]))
partial_uncfg = intf1.build_unconfig(
apply=False,
attributes={
"evpn_multisite_fabric_tracking": True,
"evpn_multisite_dci_tracking": True,
"ip_forward": True
})
self.assertMultiLineEqual(
str(partial_uncfg), '\n'.join([
'interface Ethernet0/0/1',
' no evpn multisite dci-tracking',
' no evpn multisite fabric-tracking',
' no ip forward',
' exit',
]))
def test_virtual(self):
Genie.testbed = Testbed()
dev1 = Device(name='PE1', os='iosxe')
intf1 = Interface(device=dev1, name='Vlan100')
intf2 = Interface(device=dev1, name='Loopback10')
# Defining attributes section
intf1.enabled = True
intf2.enabled = False
# Check config
cfg1 = intf1.build_config(apply=False)
self.assertMultiLineEqual(
str(cfg1), '\n'.join([
'interface Vlan100',
' no shutdown',
' exit',
]))
# Check unconfig
uncfg1 = intf1.build_unconfig(apply=False)
self.assertMultiLineEqual(str(uncfg1), '\n'.join([
'no interface Vlan100',
]))
# Check config
cfg2 = intf2.build_config(apply=False)
self.assertMultiLineEqual(
str(cfg2), '\n'.join([
'interface Loopback10',
' shutdown',
' exit',
]))
# Check unconfig
uncfg2 = intf2.build_unconfig(apply=False)
self.assertMultiLineEqual(str(uncfg2), '\n'.join([
'no interface Loopback10',
]))
# Check unconfig with attributes
uncfg2 = intf2.build_unconfig(apply=False, attributes="enabled")
self.assertMultiLineEqual(
str(uncfg2), '\n'.join([
'interface Loopback10',
' no shutdown',
' exit',
]))
def test_single_line_config(self):
# For failures
self.maxDiff = None
# Set Genie Tb
testbed = Testbed()
Genie.testbed = testbed
# Device
dev1 = Device(name='PE1', testbed=testbed, os='iosxr')
intf1 = Interface(name='GigabitEthernet0/0/0/0', device=dev1, aliases=['PE1_1'])
subif1 = Interface(name='GigabitEthernet0/0/0/1.10', device=dev1, aliases=['PE1_1'])
vrf = Vrf(name='test', testbed=testbed)
dev1.add_feature(vrf)
# Apply configuration
intf1.description = 'test'
intf1.enabled = True
intf1.mtu = 1492
intf1.vrf = vrf
intf1.mac_address = 'aabb.ccdd.eeff'
intf1.bandwidth = 8192
intf1.load_interval = 33
intf1.unnumbered_intf_ref = 'GigabitEthernet0/0/0/1.10'
intf1.ipv6_autoconf = True
intf1.medium = 'p2p'
# Build config
cfgs = intf1.build_config(apply=False)
# Check config build correctly
self.assertMultiLineEqual(
str(cfgs),
'\n'.join([
'interface GigabitEthernet0/0/0/0',
' bandwidth 8192',
' description test',
' vrf test',
' ipv4 point-to-point',
' ipv4 unnumbered GigabitEthernet0/0/0/1.10',
' ipv6 address autoconfig',
' load-interval 33',
' mtu 1492',
' no shutdown',
' mac-address aabb.ccdd.eeff',
' exit'
]))
# Build unconfig
uncfgs = intf1.build_unconfig(apply=False)
# Check config build correctly
self.assertMultiLineEqual(
str(uncfgs),
'\n'.join([
'no interface GigabitEthernet0/0/0/0',
]))
def test_NveInterface_L2vni_mcast(self):
testbed = Genie.testbed = Testbed()
dev1 = Device(testbed=testbed, name='PE1', os='iosxe')
intf1 = Interface(name='nve1', device=dev1)
# Defining attributes section
intf1.nve_bgp_host_reachability = True
intf1.nve_src_intf_loopback = 'Loopback0'
intf1.nve_vni = '20000'
intf1.nve_vni_mcast_group = '239.1.1.2'
intf1.nve_vni_local_routing = True
# Build config
cfg = intf1.build_config(apply=False)
self.assertMultiLineEqual(
str(cfg), '\n'.join([
'interface nve1', ' host-reachability protocol bgp',
' source-interface Loopback0', ' member vni 20000',
' mcast-group 239.1.1.2 local-routing', ' exit', ' exit'
]))
# Build unconfig
partial_uncfg_1 = intf1.build_unconfig(apply=False,
attributes={
'nve_bgp_host_reachability':
True,
'nve_vni': '20000'
})
# Check config build correctly
self.assertMultiLineEqual(
str(partial_uncfg_1), '\n'.join([
'interface nve1', ' no host-reachability protocol bgp',
' no member vni 20000', ' exit'
]))
# Build unconfig
partial_uncfg_2 = intf1.build_unconfig(
apply=False, attributes={'nve_src_intf_loopback': 'Loopback0'})
# Check config build correctly
self.assertMultiLineEqual(
str(partial_uncfg_2), '\n'.join(
['interface nve1', ' no source-interface Loopback0', ' exit']))
def test_ipv6_multiple_lines_confg(self):
# For failures
self.maxDiff = None
# Set Genie Tb
testbed = Testbed()
Genie.testbed = testbed
# Device
dev1 = Device(name='PE1', testbed=testbed, os='iosxr')
intf1 = Interface(name='GigabitEthernet0/0/0/0', device=dev1, \
aliases=['PE1_1'])
vrf = Vrf(name='test', testbed=testbed)
dev1.add_feature(vrf)
# Apply configuration
intf1.description = 'multiple lines config'
intf1.enabled = False
ipv6a = IPv6Addr(device=dev1)
ipv6a.ipv6 = IPv6Address('2001:db1:1::1')
ipv6a.ipv6_prefix_length = '64'
intf1.add_ipv6addr(ipv6a)
ipv6b = IPv6Addr(device=dev1)
ipv6b.ipv6 = IPv6Address('2001:db1:2::2')
ipv6b.ipv6_prefix_length = '64'
intf1.add_ipv6addr(ipv6b)
# Build config
cfgs = intf1.build_config(apply=False)
# Check config build correctly
self.assertMultiLineEqual(
str(cfgs),
'\n'.join([
'interface GigabitEthernet0/0/0/0',
' ipv6 address 2001:db1:1::1/64',
' ipv6 address 2001:db1:2::2/64',
' description multiple lines config',
' shutdown',
' exit'
]))
# Build unconfig
uncfgs = intf1.build_unconfig(apply=False, attributes={'ipv6addr':None})
# Check config build correctly
self.assertMultiLineEqual(
str(uncfgs),
'\n'.join([
'interface GigabitEthernet0/0/0/0',
' no ipv6 address 2001:db1:1::1/64',
' no ipv6 address 2001:db1:2::2/64',
' exit'
]))
def test_ipv6_multiple_lines_confg(self):
# For failures
self.maxDiff = None
# Set Genie Tb
testbed = Testbed()
Genie.testbed = testbed
# Device
dev1 = Device(name='PE1', testbed=testbed, os='nxos')
intf1 = Interface(name='Ethernet3/7', device=dev1, \
aliases=['PE1_1'])
vrf = Vrf(name='test', testbed=testbed)
dev1.add_feature(vrf)
# Apply configuration
intf1.description = 'multiple lines config'
ipv6a = IPv6Addr(device=dev1)
ipv6a.ipv6 = IPv6Address('2001:db1:1::1')
ipv6a.ipv6_prefix_length = '64'
intf1.add_ipv6addr(ipv6a)
ipv6b = IPv6Addr(device=dev1)
ipv6b.ipv6 = IPv6Address('2001:db1:2::2')
ipv6b.ipv6_prefix_length = '64'
intf1.add_ipv6addr(ipv6b)
intf1.shutdown = False
# make intf2 as L3 interface
intf1.switchport_enable = False
# Build config
cfgs = intf1.build_config(apply=False)
# Check config build correctly
self.assertMultiLineEqual(
str(cfgs),
'\n'.join([
'interface Ethernet3/7',
' description multiple lines config',
' no shutdown',
' no switchport',
' ipv6 address 2001:db1:1::1/64',
' ipv6 address 2001:db1:2::2/64',
' exit'
]))
# Build unconfig
uncfgs = intf1.build_unconfig(apply=False)
# Check config build correctly
self.assertMultiLineEqual(
str(uncfgs),
'\n'.join([
'default interface Ethernet3/7',
]))
def test_port_channel_interface(self):
# For failures
self.maxDiff = None
# Set Genie Tb
testbed = Testbed()
Genie.testbed = testbed
# Device
dev1 = Device(name='PE1', testbed=testbed, os='nxos')
intf1 = Interface(name='port-channel10', device=dev1)
# Apply configuration
intf1.channel_group_mode = 'on'
intf1.switchport_enable = False
intf1.ipv4 = '11.0.1.1/24'
intf1.shutdown = False
intf1.switchport_enable = False
intf1.mtu = 9111
uut1_int3 = Interface(name='Ethernet0/0/1',device=dev1)
intf1.add_member(uut1_int3)
# Build config
cfgs = intf1.build_config(apply=False)
# Check config build correctly
self.assertMultiLineEqual(
str(cfgs),
'\n'.join([
'interface Ethernet0/0/1',
' channel-group 10 mode on',
' exit',
'interface port-channel10',
' mtu 9111',
' no shutdown',
' no switchport',
' ip address 11.0.1.1 255.255.255.0',
' exit'
]))
# Build unconfig
uncfgs = intf1.build_unconfig(apply=False)
# Check config build correctly
self.assertMultiLineEqual(
str(uncfgs),
'\n'.join([
'interface Ethernet0/0/1',
' no channel-group 10 mode on',
' exit',
'no interface port-channel10'
]))
def configure_l3_interface(dev, name, ip, mask, remove=False, apply=True):
"""
creates an l3 interface `name` on `dev` with ip `ip` and mask `mask`
booleans can also be passed
configure_l3_interface(... apply=True) (default)
configure_l3_interface(... remove=True)
"""
from genie.conf.base import Interface
if not dev.is_connected():
dev.connect()
if name not in dev.interfaces:
interface = Interface(device=dev, name=name)
else:
interface = dev.interfaces[intf]
# this is a bug....shouldn't have to do this...
# Add some configuration
interface.switchport_enable = False
interface.ipv4 = ip
interface.ipv4.netmask = mask
if apply and not remove:
print("\n")
print("******************************************************")
print("Configuring interface {} on {} ".format(
dev.name, interface.name))
print("******************************************************")
interface.build_config(apply=apply)
if remove:
print("\n")
print("******************************************************")
print("Removing interface {} on {} ".format(dev.name, interface.name))
print("******************************************************")
interface.build_unconfig(apply=apply)
return interface
def test_vni_lines_confg(self):
# For failures
self.maxDiff = None
# Set Genie Tb
testbed = Testbed()
Genie.testbed = testbed
# Device
dev1 = Device(name='PE1', testbed=testbed, os='iosxr')
intf1 = Interface(name='nve100', device=dev1, \
aliases=['PE1_1'])
# Apply configuration
intf1.source_interface = Interface(name='Loopback0', device=dev1)
vni = Vni(100, device=dev1)
vni.mcast_group = '225.1.1.1 0.0.0.0'
intf1.add_vni(vni)
# Build config
cfgs = intf1.build_config(apply=False)
# Check config build correctly
self.assertMultiLineEqual(
str(cfgs),
'\n'.join([
'interface nve100',
' member vni 100',
' mcast-group 225.1.1.1 0.0.0.0',
' exit',
' source-interface Loopback0',
' exit'
]))
# Build unconfig
uncfgs = intf1.build_unconfig(apply=False, attributes={'vnis':None})
# Check config build correctly
self.assertMultiLineEqual(
str(uncfgs),
'\n'.join([
'interface nve100',
' no member vni 100',
' exit'
]))
def test_port_channel_interface_trunk_vlans(self):
# For failures
self.maxDiff = None
# Set Genie Tb
testbed = Testbed()
Genie.testbed = testbed
# Device
dev1 = Device(name='PE1', testbed=testbed, os='nxos')
intf1 = Interface(name='port-channel10', device=dev1)
# Apply configuration
intf1.channel_group_mode = 'active'
intf1.enabled = True
intf1.switchport_enable = True
intf1.switchport_mode = 'trunk'
intf1.trunk_vlans = "2-5,11-105,111-205"
uut1_int3 = Interface(name='Ethernet0/0/1', device=dev1)
intf1.add_member(uut1_int3)
# Build config
cfgs = intf1.build_config(apply=False)
# Check config build correctly
self.assertMultiLineEqual(
str(cfgs), '\n'.join([
'interface Ethernet0/0/1', ' channel-group 10 mode active',
' exit', 'interface port-channel10', ' no shutdown',
' switchport', ' switchport mode trunk',
' switchport trunk allowed vlan 2-5,11-105,111-205', ' exit'
]))
# Build unconfig
uncfgs = intf1.build_unconfig(apply=False)
# Check config build correctly
self.assertMultiLineEqual(
str(uncfgs), '\n'.join([
'interface Ethernet0/0/1', ' no channel-group 10 mode active',
' exit', 'no interface port-channel10'
]))
def test_EthernetInterface(self):
testbed = Genie.testbed = Testbed()
dev1 = Device(testbed=testbed, name='PE1', os='nxos')
dev2 = Device(testbed=testbed, name='P1', os='nxos')
intf1 = Interface(name='Ethernet0/0/1', device=dev1)
intf2 = Interface(name='Ethernet0/0/2', device=dev2)
# Defining attributes section
intf1.ipv4 = '201.0.12.1'
intf1.ipv4.netmask = '255.255.255.0'
intf1.speed = 1000
intf1.shutdown = False
# make intf1 as L3 interface
intf1.switchport_enable = False
intf1.mtu = 500
intf1.ipv6 = '2001::12:1'
cfg = intf1.build_config(apply=False)
self.assertMultiLineEqual(
str(cfg), '\n'.join([
'interface Ethernet0/0/1',
' mtu 500',
' no shutdown',
' no switchport',
' ip address 201.0.12.1 255.255.255.0',
' ipv6 address 2001::12:1/128',
' speed 1000',
' exit',
]))
uncfg = intf1.build_unconfig(apply=False,
attributes={
'ipv6': True,
'ipv4': True
})
self.assertMultiLineEqual(
str(uncfg), '\n'.join([
'interface Ethernet0/0/1',
' no ip address',
' no ipv6 address',
' exit',
]))
partial_uncfg = intf1.build_unconfig(apply=False, attributes="mtu")
self.assertMultiLineEqual(
str(partial_uncfg), '\n'.join([
'interface Ethernet0/0/1',
' no mtu',
' exit',
]))
# make intf2 as L2 interface
intf2.switchport_enable = True
intf2.switchport_mode = L2_type.TRUNK
intf2.sw_trunk_allowed_vlan = '200-201'
cfg2 = intf2.build_config(apply=False)
self.assertMultiLineEqual(
str(cfg2), '\n'.join([
'interface Ethernet0/0/2',
' switchport',
' switchport mode trunk',
' switchport trunk allowed vlan 200-201',
' exit',
]))
def test_basic_uncfg(self):
testbed = Genie.testbed = Testbed()
dev1 = Device(testbed=testbed, name='PE1', os='iosxe')
dev2 = Device(testbed=testbed, name='PE2', os='iosxe')
intf1 = Interface(name='GigabitEthernet0/0/1',device=dev1)
intf1.switchport = True
intf2 = Interface(name='GigabitEthernet0/0/2',device=dev2)
intf3 = Interface(name='Vlan100',device=dev1)
vlan = Vlan()
vlan.device_attr[dev1].vlan_id = 100
vlan.device_attr[dev2].vlan_id = 300
access_map_id = 'ed'
vlan_configuration_id = '3'
vlan.device_attr[dev1]
vlan.device_attr[dev2]
vlan.device_attr[dev1].interface_attr[intf1].switchport_mode = \
'trunk'
vlan.device_attr[dev1].interface_attr[intf1].sw_trunk_allowed_vlan = \
'200-201'
vlan.device_attr[dev1].access_map_attr[access_map_id]
vlan.device_attr[dev2].access_map_attr[access_map_id]
vlan.device_attr[dev1].vlan_configuration_attr[vlan_configuration_id]
vlan.device_attr[dev2].vlan_configuration_attr[vlan_configuration_id]
# Defining attributes section
with self.assertRaises(ValueError):
vlan.media = 'invalid'
vlan.media = 'enet'
self.assertIs(type(vlan.media), Vlan.Media)
vlan.accounting_type = 'input'
vlan.device_attr[dev1].access_map_action = 'drop'
# Unconfig testing
# Set a mock
dev1.configure = Mock()
dev2.configure = Mock()
dev1.add_feature(vlan)
dev2.add_feature(vlan)
# Mock config
uncfg1 = vlan.build_unconfig(apply=False)
self.assertCountEqual(uncfg1.keys(), ['PE1', 'PE2'])
self.assertMultiLineEqual(
str(uncfg1['PE1']),
'\n'.join([
'no vlan 100',
'no vlan accounting input',
'no vlan access-map ed',
'no vlan configuration 3',
'interface GigabitEthernet0/0/1',
' no switchport mode trunk',
' no switchport trunk allowed vlan 200-201',
' exit',
]))
self.assertMultiLineEqual(
str(uncfg1['PE2']),
'\n'.join([
'no vlan 300',
'no vlan accounting input',
'no vlan access-map ed',
'no vlan configuration 3',
]))
uncfg_intf = intf1.build_unconfig(apply=False, attributes="switchport")
self.assertMultiLineEqual(
str(uncfg_intf),
'\n'.join([
'interface GigabitEthernet0/0/1',
' no switchport',
' exit',
]))
partial_uncfg1 = vlan.build_unconfig(apply=False,
attributes={'device_attr':\
{'*':"media"}})
self.assertCountEqual(partial_uncfg1.keys(), ['PE1', 'PE2'])
self.assertMultiLineEqual(
str(partial_uncfg1['PE1']),
'\n'.join([
'vlan 100',
' no media enet',
' exit',
]))
partial_unconfigure = vlan.build_unconfig(apply=False,
attributes={'device_attr':\
{'*':{'access_map_attr':\
{'*':"access_map_action"}}}})
self.assertCountEqual(partial_unconfigure.keys(), ['PE1', 'PE2'])
self.assertMultiLineEqual(
str(partial_unconfigure['PE1']),
'\n'.join([
'vlan access-map ed',
' no action drop',
' exit',
]))
all_vlan_interface_uncfg = vlan.build_unconfig(apply=False,
attributes={'device_attr':\
{'*':{'interface_attr':'*'}}})
self.assertCountEqual(all_vlan_interface_uncfg.keys(), ['PE1', 'PE2'])
self.assertMultiLineEqual(
str(all_vlan_interface_uncfg['PE1']),
'\n'.join([
'interface GigabitEthernet0/0/1',
' no switchport mode trunk',
' no switchport trunk allowed vlan 200-201',
' exit',
]))
partial_vlan_interface_uncfg = vlan.build_unconfig(apply=False,
attributes={'device_attr':\
{'*':{'interface_attr':\
{'*':"sw_trunk_allowed_vlan"}}}})
self.assertCountEqual(partial_vlan_interface_uncfg.keys(), ['PE1', 'PE2'])
self.assertMultiLineEqual(
str(partial_vlan_interface_uncfg['PE1']),
'\n'.join([
'interface GigabitEthernet0/0/1',
' no switchport trunk allowed vlan 200-201',
' exit',
]))
def test_single_line_config(self):
# For failures
self.maxDiff = None
# Set Genie Tb
testbed = Testbed()
Genie.testbed = testbed
# Device
dev1 = Device(name='PE1', testbed=testbed, os='nxos')
intf1 = Interface(name='Ethernet3/7', device=dev1, aliases=['PE1_1'])
intf2 = Interface(name='Ethernet3/9', device=dev1, aliases=['PE1_2'])
subif1 = Interface(name='Ethernet3/6.10',
device=dev1,
aliases=['PE1_1'])
vrf = Vrf(name='test', testbed=testbed)
dev1.add_feature(vrf)
# Apply configuration
intf1.description = 'test'
intf1.enabled = False
# intf1.shutdown = False
intf1.link_up_down_trap_enable = True
intf1.mtu = 1492
intf1.vrf = vrf
intf1.mac_address = 'aabb.ccdd.eeff'
intf1.bandwidth = 8192
intf1.link_status = True
intf1.load_interval = 33
intf1.dhcp = True
intf1.unnumbered_intf_ref = 'Ethernet3/6.10'
intf1.ipv6_autoconf = True
intf1.switchport_mode = 'access'
intf1.medium = 'p2p'
intf1.delay = 11
intf1.access_vlan = '19'
intf1.auto_negotiate = False
# make intf2 as L2 interface
intf1.switchport_enable = True
intf2.enabled = True
intf2.switchport_enable = True
intf2.switchport_mode = 'trunk'
intf2.trunk_add_vlans = '1,2,3'
# Build config
cfgs = intf1.build_config(apply=False)
# Check config build correctly
self.assertMultiLineEqual(
str(cfgs), '\n'.join([
'interface Ethernet3/7', ' medium p2p', ' bandwidth 8192',
' delay 11', ' description test', ' mtu 1492', ' shutdown',
' snmp trap link-status', ' vrf member test',
' logging event port link-status', ' ip address dhcp',
' ip unnumbered Ethernet3/6.10', ' ipv6 address autoconfig',
' switchport', ' switchport mode access', ' load-interval 33',
' mac-address aabb.ccdd.eeff', ' switchport access vlan 19',
' no speed', ' no duplex', ' exit'
]))
cfgs = intf2.build_config(apply=False)
# Check config build correctly
self.assertMultiLineEqual(
str(cfgs), '\n'.join([
'interface Ethernet3/9', ' no shutdown', ' switchport',
' switchport mode trunk',
' switchport trunk allowed vlan add 1,2,3', ' exit'
]))
# Build unconfig
uncfgs = intf1.build_unconfig(apply=False,
attributes={
'mtu': True,
'enabled': True
})
# Check config build correctly
self.assertMultiLineEqual(
str(uncfgs), '\n'.join(
['interface Ethernet3/7', ' no mtu', ' no shutdown', ' exit']))
uncfgs = intf2.build_unconfig(apply=False,
attributes={'trunk_add_vlans': True})
# Check config build correctly
self.assertMultiLineEqual(
str(uncfgs), '\n'.join([
'interface Ethernet3/9',
' switchport trunk allowed vlan remove 1,2,3', ' exit'
]))
def test_InterfaceSwitchport(self):
Genie.testbed = Testbed()
dev1 = Device(name='PE1', os='iosxe')
intf1 = Interface(device=dev1, name='GigabitEthernet0/0/1')
# Do not set switchport - default
# Check config
cfg1 = intf1.build_config(apply=False)
self.assertMultiLineEqual(
str(cfg1), '\n'.join([
'interface GigabitEthernet0/0/1',
' exit',
]))
# Set switchport to True
intf1.switchport = True
# Check config
cfg2 = intf1.build_config(apply=False)
self.assertMultiLineEqual(
str(cfg2), '\n'.join([
'interface GigabitEthernet0/0/1',
' switchport',
' exit',
]))
# Check unconfig
uncfg2 = intf1.build_unconfig(apply=False, attributes="switchport")
self.assertMultiLineEqual(
str(uncfg2), '\n'.join([
'interface GigabitEthernet0/0/1',
' no switchport',
' exit',
]))
# Set switchport to False
intf1.switchport = False
# Check config
cfg3 = intf1.build_config(apply=False)
self.assertMultiLineEqual(
str(cfg3), '\n'.join([
'interface GigabitEthernet0/0/1',
' no switchport',
' exit',
]))
# Check unconfig
uncfg3 = intf1.build_unconfig(apply=False, attributes="switchport")
self.assertMultiLineEqual(
str(uncfg3), '\n'.join([
'interface GigabitEthernet0/0/1',
' switchport',
' exit',
]))
# test full switchport related configuration
intf1.switchport_enable = True
intf1.switchport_mode = "access"
intf1.access_vlan = "100"
intf1.trunk_vlans = "all"
intf1.trunk_add_vlans = "100"
intf1.trunk_remove_vlans = "100-200"
intf1.native_vlan = "1"
cfg1 = intf1.build_config(apply=False)
self.assertMultiLineEqual(
str(cfg1), '\n'.join([
'interface GigabitEthernet0/0/1',
' switchport',
' switchport mode access',
' switchport trunk allowed vlan all',
' switchport trunk native vlan 1',
' switchport access vlan 100',
' switchport trunk allowed vlan add 100',
' switchport trunk allowed vlan remove 100-200',
' exit',
]))
def test_all_ethernet(self):
testbed = Testbed()
Genie.testbed = Testbed()
dev1 = Device(name='PE1', os='iosxe')
intf1 = Interface(device=dev1, name='GigabitEthernet0/0/1')
vrf = Vrf(name='test', testbed=testbed)
dev1.add_feature(vrf)
# Defining attributes section
intf1.description = 'test desc'
intf1.enabled = True
intf1.link_up_down_trap_enable = True
intf1.mtu = 500
intf1.vrf = vrf
intf1.vrf_downstream = 'vrf_downstream_test'
intf1.mac_address = 'aaaa.bbbb.cccc'
intf1.bandwidth = 768
intf1.link_status = True
intf1.load_interval = 30
intf1.encapsulation = 'dot1q'
intf1.first_dot1q = '20'
intf1.second_dot1q = '30'
ipv4a = IPv4Addr(device=dev1)
ipv4a.ipv4 = IPv4Address('192.168.1.1')
ipv4a.prefix_length = '24'
intf1.add_ipv4addr(ipv4a)
ipv4b = IPv4Addr(device=dev1)
ipv4b.ipv4 = IPv4Address('192.168.1.2')
ipv4b.prefix_length = '24'
ipv4b.ipv4_secondary = True
intf1.add_ipv4addr(ipv4b)
ipv6a = IPv6Addr(device=dev1)
ipv6a.ipv6 = IPv6Address('2001:db1:1::1')
ipv6a.ipv6_prefix_length = '64'
intf1.add_ipv6addr(ipv6a)
ipv6b = IPv6Addr(device=dev1)
ipv6b.ipv6 = IPv6Address('2001:db1:2::2')
ipv6b.ipv6_prefix_length = '64'
intf1.add_ipv6addr(ipv6b)
ipv6b.ipv6_anycast = True
intf1.dhcp = True
intf1.dhcp_client_id = '10'
intf1.dhcp_hostname = 'dhcp-host'
intf1.unnumbered_intf_ref = 'GigabitEthernet0/0/2.20'
intf1.ipv6_unnumbered_intf_ref = 'GigabitEthernet0/0/3.100'
intf1.ipv6_enabled = True
intf1.ipv6_autoconf = True
intf1.ipv6_autoconf_default = True
intf1.medium = "broadcast"
intf1.delay = 100
intf1.port_speed = '1000'
intf1.auto_negotiate = True
intf1.duplex_mode = "full"
intf1.flow_control_receive = True
intf1.flow_control_send = False
# Check config
cfg = intf1.build_config(apply=False)
self.assertMultiLineEqual(
str(cfg), '\n'.join([
'interface GigabitEthernet0/0/1',
' encapsulation dot1q 20 second-dot1q 30',
' vrf forwarding test downstream vrf_downstream_test',
' description test desc',
' bandwidth 768',
' mtu 500',
' no shutdown',
' snmp trap link-status',
' logging event link-status',
' load-interval 30',
' ipv6 enable',
' ipv6 address autoconfig default',
' ip unnumbered GigabitEthernet0/0/2.20',
' ipv6 unnumbered GigabitEthernet0/0/3.100',
' speed 1000',
' negotiation auto',
' duplex full',
' flowcontrol receive on',
' flowcontrol send off',
' ip address dhcp client-id 10 hostname dhcp-host',
' medium broadcast',
' delay 100',
' ip address 192.168.1.1 255.255.255.0',
' ip address 192.168.1.2 255.255.255.0 secondary',
' ipv6 address 2001:db1:1::1/64',
' ipv6 address 2001:db1:2::2/64 anycast',
' mac-address aaaa.bbbb.cccc',
' exit',
]))
# Check unconfig without attribtues
uncfg = intf1.build_unconfig(apply=False)
self.assertMultiLineEqual(
str(uncfg), '\n'.join([
'default interface GigabitEthernet0/0/1',
'interface GigabitEthernet0/0/1',
'shutdown',
]))
# Check ipv4 unconfig
uncfg = intf1.build_unconfig(apply=False, attributes="ipv4addr")
self.assertMultiLineEqual(
str(uncfg), '\n'.join([
'interface GigabitEthernet0/0/1',
' no ip address 192.168.1.1 255.255.255.0',
' no ip address 192.168.1.2 255.255.255.0 secondary',
' exit',
]))
# Check encapsulation unconfig
uncfg = intf1.build_unconfig(apply=False,
attributes={
"encapsulation": None,
"first_dot1q": None
})
self.assertMultiLineEqual(
str(uncfg), '\n'.join([
'interface GigabitEthernet0/0/1',
' no encapsulation dot1q',
' exit',
]))
def test_lag_interafce(self):
Genie.testbed = Testbed()
dev1 = Device(name='PE1', os='iosxe')
intf1 = Interface(device=dev1, name='GigabitEthernet1/0/1')
intf2 = Interface(device=dev1, name='GigabitEthernet1/0/2')
intf3 = Interface(device=dev1, name='Port-channel10')
# lacp
intf1.lag_bundle_id = 10
intf1.lag_activity = 'active'
intf1.lag_lacp_port_priority = 30
# pagp
intf2.lag_bundle_id = 20
intf2.lag_activity = 'auto'
intf2.lag_non_silent = True
intf2.lag_pagp_port_priority = 50
# virtual lagInterface
intf3.lag_lacp_system_priority = 100
intf3.lag_lacp_max_bundle = 20
intf3.lag_lacp_min_bundle = 15
# error assigned attributes, shouldn't in the configuration
intf2.lag_lacp_max_bundle = 123
# Check config
cfg1 = intf1.build_config(apply=False)
self.assertMultiLineEqual(
str(cfg1), '\n'.join([
'interface GigabitEthernet1/0/1',
' channel-group 10 mode active',
' lacp port-priority 30',
' exit',
]))
cfg2 = intf2.build_config(apply=False)
self.assertMultiLineEqual(
str(cfg2), '\n'.join([
'interface GigabitEthernet1/0/2',
' channel-group 20 mode auto non-silent',
' pagp port-priority 50',
' exit',
]))
cfg3 = intf3.build_config(apply=False)
self.assertMultiLineEqual(
str(cfg3), '\n'.join([
'lacp system-priority 100',
'interface Port-channel10',
' lacp max-bundle 20',
' lacp min-bundle 15',
' exit',
]))
# Check unconfig
uncfg1 = intf1.build_unconfig(apply=False)
self.assertMultiLineEqual(
str(uncfg1), '\n'.join([
'default interface GigabitEthernet1/0/1',
'interface GigabitEthernet1/0/1',
'shutdown',
]))
uncfg2 = intf2.build_unconfig(apply=False)
self.assertMultiLineEqual(
str(uncfg2), '\n'.join([
'default interface GigabitEthernet1/0/2',
'interface GigabitEthernet1/0/2',
'shutdown',
]))
# Check unconfig with attributes
uncfg1 = intf1.build_unconfig(apply=False,
attributes={
'lag_activity': None,
'lag_bundle_id': None
})
self.assertMultiLineEqual(
str(uncfg1), '\n'.join([
'interface GigabitEthernet1/0/1',
' no channel-group 10 mode active',
' exit',
]))
uncfg2 = intf2.build_unconfig(apply=False,
attributes="lag_pagp_port_priority")
self.assertMultiLineEqual(
str(uncfg2), '\n'.join([
'interface GigabitEthernet1/0/2',
' no pagp port-priority 50',
' exit',
]))
