def main(location, month, day, hour, north, lb_preparation):
# Set defaults
if month == None:
month = 12
if day == None:
day = 21
if hour == None:
hour = 12
# From _location split and referense latitude, longitude and timezone
lat = (location.split("\n"))[2]
latitude = lat.split(",")[0]
long = (location.split("\n"))[3]
longitude = long.split(",")[0]
off = (location.split("\n"))[4]
offset = off.split(",")[0]
offset = int(math.ceil(float(offset)))
h = int(math.modf(hour)[1])
m = int(60 * (math.modf(hour)[0]))
date = ghp.ConstructDate(2017, month, day, h, m, 0)
sunPosition = Rhino.RhinoDoc.ActiveDoc.Lights.Sun
sun.Enabled.SetValue(sunPosition, True)
sun.TimeZone.SetValue(sunPosition, offset)
sun.SetPosition(sunPosition, date, float(latitude),
float(longitude)) #Adjust _location and Date of Rhino Sun
print "Sun position latitude / longitude set to: " + str(
latitude) + " / " + longitude
print "Sun position date set to: " + str(date)
if sun.Altitude.Info.GetValue(sunPosition) > 0:
#set Orientation
if north == None:
sun.North.SetValue(sunPosition, 90)
else:
northAngle, northVector = lb_preparation.angle2north(north)
sun.North.SetValue(sunPosition, (90 + math.degrees(northAngle)))
print "North angle set to : " + str(math.degrees(northAngle))
def main():
if _runIt == True:
#Give priority to analysisPeriod over Month/Day/Hour.
if analysisPeriod_ != None:
Months = int((analysisPeriod_)[0][0])
Days = int((analysisPeriod_)[0][1])
for hourRange in range((int((analysisPeriod_)[0][2]) * 100), (int(
(analysisPeriod_)[1][2]) * 100), int((1 / _timeStep_) * 100)):
H = int(math.modf(hourRange / 100)[1])
M = int(60 * (math.modf(hourRange / 100)[0]))
Date = ghp.ConstructDate(
2015, Months, Days, H, M,
0) #Date = ghp.ConstructDate(2015,Months,Days,H,M,0)
Sunposition = Rhino.RhinoDoc.ActiveDoc.Lights.Sun #Link grasshopper definition to Rhino Sun system
sun.Enabled.SetValue(Sunposition, True)
sun.TimeZone.SetValue(Sunposition, offset)
sun.SetPosition(
Sunposition, Date, float(Latitude),
float(Longitude)) #Adjust _location and Date of Rhino Sun
if sun.Altitude.Info.GetValue(Sunposition) > 10:
#set Orientation
if North_ == None:
sun.North.SetValue(Sunposition, 90)
else:
if type(North_) is float:
sun.North.SetValue(Sunposition, (90 - North_))
else:
#Set North
zero = Rhino.Geometry.Vector3d(1.0, 0.0, 0.0)
Xaxis = Rhino.Geometry.Vector3d(0.0, 0.0, 1.0)
Origin = Rhino.Geometry.Point3d(0.0, 0.0, 0.0)
Plane = Rhino.Geometry.Plane(Origin, Xaxis)
angle = Rhino.Geometry.Vector3d.VectorAngle(
zero, North_, Plane)
sun.North.SetValue(Sunposition,
math.degrees(angle))
if _render_ == True:
rs.Command(
"!_render"
) #send the command to render on your active renderer
if _save_ == True: #Enable to save the view as a .png
dir = str(
_workingDir_
) #Define the path, if path does not exist, create, otherwise use existing one
rs.Command("_-SaveRenderWindowAs \"" + (dir) +
"\\" + str(StrMonth[int(Months) - 1]) +
"_" + str(H) + "_" + str(M) + ".png\"")
rs.Command(
"_-CloseRenderWindow"
) #close the rendered window when in saving mode to avoid stacking a series of renderWindows when running on Rhino renderer.
else:
if _save_ == True:
dir = str(
_workingDir_
) #Define the path, if path does not exist, create, otherwise use existing one
rs.Command("_-ViewCaptureToFile \"" + dir + "\\" +
str(StrMonth[int(Months) - 1]) + "_" +
str(H) + "_" + str(M) + ".png\"" +
" w " + str(viewWidth_) + " " + "h " +
str(viewHeight_) + " " + " enter")
else:
DarkHours = (str(StrMonth[int(Months) - 1]) + "_" +
str(H) + "_" + str(M) + " is Nighttime")
else:
Hours = _Hour_
Months = _Month_
Days = _Day_
H = int(math.modf(Hours)[1])
M = int(60 * (math.modf(Hours)[0]))
Date = ghp.ConstructDate(
2015, Months, Days, H, M,
0) #Date = ghp.ConstructDate(2015,Months,Days,H,M,0)
Sunposition = Rhino.RhinoDoc.ActiveDoc.Lights.Sun #Link grasshopper definition to Rhino Sun system
sun.Enabled.SetValue(Sunposition, True)
sun.TimeZone.SetValue(Sunposition, offset)
sun.SetPosition(
Sunposition, Date, float(Latitude),
float(Longitude)) #Adjust _location and Date of Rhino Sun
if sun.Altitude.Info.GetValue(Sunposition) > 10:
#set Orientation
if North_ == None:
sun.North.SetValue(Sunposition, 90)
else:
if type(North_) is float:
sun.North.SetValue(Sunposition, (90 - North_))
else:
#Set North
zero = Rhino.Geometry.Vector3d(1.0, 0.0, 0.0)
Xaxis = Rhino.Geometry.Vector3d(0.0, 0.0, 1.0)
Origin = Rhino.Geometry.Point3d(0.0, 0.0, 0.0)
Plane = Rhino.Geometry.Plane(Origin, Xaxis)
angle = Rhino.Geometry.Vector3d.VectorAngle(
zero, North_, Plane)
sun.North.SetValue(Sunposition, math.degrees(angle))
if _render_ == True:
rs.Command(
"!_render"
) #send the command to render on your active renderer
if _save_ == True: #Enable to save the view as a .png
dir = str(
_workingDir_
) #Define the path, if path does not exist, create, otherwise use existing one
if os.path.exists(dir) == False:
os.mkdir(dir)
rs.Command("_-SaveRenderWindowAs \"" + (dir) + "\\" +
str(StrMonth[int(Months) - 1]) + "_" +
str(H) + "_" + str(M) + ".png\"")
rs.Command(
"_-CloseRenderWindow"
) #close the rendered window when in saving mode to avoid stacking a series of renderWindows when running on Rhino renderer.
imagePath = (dir + "\\" +
str(StrMonth[int(Months) - 1]) + "_" +
str(H) + "_" + str(M) + ".png")
return imagePath
else:
if _save_ == True:
dir = str(
_workingDir_
) #Define the path, if path does not exist, create, otherwise use existing one
rs.Command("_-ViewCaptureToFile \"" + (dir) + "\\" +
str(StrMonth[int(Months) - 1]) + "_" +
str(H) + "_" + str(M) + ".png\"" + " w " +
str(viewWidth_) + " " + "h " +
str(viewHeight_) + " " + " enter")
imagePath = (dir + "\\" +
str(StrMonth[int(Months) - 1]) + "_" +
str(H) + "_" + str(M) + ".png")
return imagePath
else:
pass
else:
return -1