def run(self):
self.save_Settings()
self.galvoOut = DAQPin(gv.galvoOutPin)
self.shutterOut = DAQPin(gv.shutterPin)
self.galvoOut.write(float(self.voltStartBox.get()))
x1 = int(self.x1Box.get())
y1 = int(self.y1Box.get())
x2 = int(self.x2Box.get())
y2 = int(self.y2Box.get())
imageParams = [x1, x2, y1, y2]
binSize = int(self.binSizeBox.get())
self.camera = Camera(self.cameraVar.get(),
float(self.expTimeBox.get()),
imageParams=imageParams,
bin=binSize)
self.voltArr = np.linspace(float(self.voltStartBox.get()),
float(self.voltStopBox.get()),
num=int(self.numImagesBox.get()))
if os.path.isdir(self.folderPath.get()) == False:
print('-----ERROR-----------')
print('YOU HAVE ENTERED AN INVALID FOLDERPATH')
if os.path.isfile(self.folderPath.get() + '\\' + self.fileName.get() +
'.png') == True:
print('--------------ERROR-------')
print('THERE IS ALREADY A FILE WITH THAT NAME IN THAT FOLDER')
gv.error_Sound()
sys.exit()
plt.close('all')
if self.ratioVar.get() == True:
self.sweep_Ratio()
else:
self.sweep_Single()
def aquire_Data(self):
self.catch_Errors_Aquisition()
self.save_Settings()
# #check that there is flow. This is not foolproof because I do not use the dawboard
if int(float(self.flowRateBox.get())) == 0:
gv.error_Sound()
print('FLOW RATE IS ZERO')
#turn on the nozzle and open the shutter
gv.begin_Flow_Sound()
self.make_Flow()
shutterOut = DAQPin(gv.shutterPin) #open the shutter contorl pin
shutterOut.open_Shutter() #open the shutter
time.sleep(int(self.nozzleWaitBox.get()))
# SWEEP
t = time.time()
sweeper = Sweeper(self)
sweeper.sweep()
print(time.time() - t)
#turn off the nozzle and close shutter
shutterOut.close_Shutter() #close the aperture
shutterOut.close() #close the shutter control pin
self.flowRateBox.delete(0, 'end')
self.flowRateBox.insert(0, '0')
self.make_Flow()
self.save_Fits_Files()
self.save_Data()
self.make_Info_File()
def _take_Exposures(self):
if self.GUI.cameraVarData.get() == 'BOTH':
resultsDict = {
} #this is used to add the images taken concurrently. I use a dictionary so I can keep track of
#which image belongs to which camera
T1 = threading.Thread(target=self._take_Exposure_Wrapper,
args=(resultsDict, self.cameraNear))
T2 = threading.Thread(target=self._take_Exposure_Wrapper,
args=(resultsDict, self.cameraFar))
T1.start()
T2.start()
T1.join()
T2.join()
imgNear = resultsDict['NEAR']
imgFar = resultsDict['FAR']
return [imgNear, imgFar]
elif self.GUI.cameraVarData.get() == 'NEAR':
imgNear = self.cameraNear.aquire_Image()
return [imgNear, None]
elif self.GUI.cameraVarData.get() == 'FAR':
imgFar = self.cameraFar.aquire_Image()
return [None, imgFar]
else:
gv.error_Sound()
raise Exception('NO VALID CAMERA NAME PROVIDED')
def fit_Data(self, x, y):
print('here')
#fit the data to get the optimal parameters
x0Guess = float(self.v0Box.get())
aGuess = np.max(y) - np.min(y)
bGuess = np.min(y)
guess = [x0Guess, aGuess, bGuess, self.sigmaGuess, self.gammaGuess]
bounds = ([-5, 0, 0, 0, 0], [5, 100000, 100000, .1, .1])
if bGuess > bounds[1][2] or aGuess > bounds[1][1]:
print(
'GUESS VALUES ARE LARGER THAN BOUNDS. SIGNAL STRENGTH IS VERY HIGH'
)
gv.error_Sound()
sys.exit()
try:
params, pcov = spo.curve_fit(self.spectral_Profile,
x,
y,
p0=guess,
bounds=bounds)
except:
print('FIT FAILED')
plt.plot(x, y)
plt.show()
perr = np.sqrt(np.diag(pcov))
return params, perr
def catch_Errors(self):
if self.flowRate <= 0:
gv.error_Sound()
raise Exception('The flowrate is zero or invalid!')
if self.exposure_MilliSeconds < 500:
gv.error_Sound()
raise Exception(
'The camera exposure is too low. Remember you enter it as seconds'
)
def _take_Exposure_Wrapper(self, resultsDict, camera):
#wrapper for taking images concurrently.
if camera.camName == 'NEAR':
resultsDict['NEAR'] = self.cameraNear.aquire_Image()
elif camera.camName == 'FAR':
resultsDict['FAR'] = self.cameraFar.aquire_Image()
else:
gv.error_Sound()
raise Exception('NO VALID CAMERA NAME PROVIDED')
def change_Directory_And_Catch_File_Errors(self):
imagesFolder = self.runName + 'Folder'
try:
os.mkdir(self.path + '\\' + imagesFolder)
except FileExistsError:
gv.error_Sound()
print('That file already exists!!')
exit()
except:
raise Exception('some other file issue')
os.chdir(self.path + '\\' + imagesFolder)
def set_Servo_Position(self,deg):
if self.pinName!=gv.servoPin:
print("-------------ERROR----------------------------")
print('YOU CAN ONLY CONTROL THE SERVO THROUGH THE SERVO PIN')
print("----------------end ERROR-------------")
gv.error_Sound()
sys.exit()
m=.5/90 #ms/degree
b=1.5 #ms
width= m*deg+b
width=width/1e3 #convert to seconds
sep=20E-3 #pulse seperation, seconds az CVBNM,.CVBNM
self.generate_Digital_Pulse_Train(width=width,sep=sep)
def _initialize_Cameras(self):
binNearX = self.binSizeNear
binNearY = self.binSizeNear
binFarX = self.binSizeFarX
binFarY = self.binSizeFarY
if binFarX <= 0 and binFarY <= 0:
raise Exception('Both bin values cannot be zero')
elif binFarX == 0:
binFarX = binFarY
elif binFarY == 0:
binFarY = binFarX
if binNearX <= 0 and binNearY <= 0:
raise Exception('Both bin values cannot be zero')
elif binNearX == 0:
binNearX = binNearY
elif binNearY == 0:
binNearY = binNearX
if self.GUI.cameraVarData.get() == 'BOTH':
self.cameraFar = Camera('FAR',
self.expTimeFar,
self.imageParamFar,
binx=binFarX,
biny=binFarY)
self.cameraNear = Camera('NEAR',
self.expTimeNear,
self.imageParamNear,
binx=binNearX,
biny=binNearY)
elif self.GUI.cameraVarData.get() == 'NEAR':
self.cameraNear = Camera('NEAR',
self.expTimeNear,
self.imageParamNear,
binx=binNearX,
biny=binNearY)
elif self.GUI.cameraVarData.get() == 'FAR':
self.cameraFar = Camera('FAR',
self.expTimeFar,
self.imageParamFar,
binx=binFarX,
biny=binFarY)
else:
gv.error_Sound()
raise Exception('NO VALID CAMERA NAME PROVIDED')
def run(self):
self.save_Settings()
self.initialize_Camera()
if os.path.isdir(self.folderPath.get()) == False:
print('-----ERROR-----------')
print('YOU HAVE ENTERED AN INVALID FOLDERPATH')
if os.path.isfile(self.folderPath.get() + '\\' + self.fileName.get() +
'.png') == True:
print('--------------ERROR-------')
print('THERE IS ALREADY A FILE WITH THAT NAME IN THAT FOLDER')
gv.error_Sound()
sys.exit()
if self.ratioVar.get() == True:
self.sweep_With_Shutter()
else:
self.sweep_Without_Shutter()
self.camera.close()
def generate_Digital_Pulse_Train(self,freq=None,duty=None,width=None,sep=None):
#provided units must be SI
if self.pinName!=gv.servoPin:
print("-------------ERROR----------------------------")
print('YOU ARE TRYING TO SEND A DIGITAL PULSE THROUGH THE WRONG PIN')
print("----------------end ERROR-------------")
gv.error_Sound()
sys.exit()
#either freq or duty must not be None, or width and sep must not be None
error=False
if freq is not None and width is not None:
error=True
if duty is not None and sep is not None:
error=True
if freq is None and sep is None:
error=True
if duty is None and width is None:
error=True
if error==True:
print("-------------ERROR----------------------------")
print('YOU CAN ONLY SET PULSE WIDTH AND SEPERATION OR FREQUENCY AND DUTY')
print("----------------end ERROR-------------")
gv.error_Sound()
sys.exit()
if sep is not None and width is not None:
if (width<sep)==False:
print("-------------ERROR----------------------------")
print('PULSE WIDTH MUST BE LESS THAN SEPERATION')
print("----------------end ERROR-------------")
gv.error_Sound()
sys.exit()
freq=1/sep
duty=width/sep
if self.thread is not None:
#if the channel and thread is already running it needs to be stopped
self.thread.join()
self.daqChannel.stop()
self.channelObject.co_pulse_duty_cyc=duty
self.channelObject.co_pulse_freq=freq
self.thread=threading.Thread(target=self.daqChannel.start())
self.thread.start()
def close_Shutter(self):
if self.type!='digitalOut':
gv.error_Sound()
raise Exception('Incorrect pin to control shutter')
self.write_Low()
def _catch_And_Fix_Errors(self):
if self.camName != 'FAR' and self.camName != 'NEAR':
print('---------------ERROR----------------')
print(
'NO VALID CAMERA NAME PROVIDED. VALID NAMES ARE \'NEAR\' AND \'FAR\''
)
gv.error_Sound()
sys.exit()
#make image params integer if not already so
if self.imageParams is not None:
for i in range(4):
self.imageParams[i] = int(self.imageParams[i])
#binning results cannot conflict
binError = False
if self.bin is None and self.binx is None and self.biny is None:
binError = True
if self.bin is not None and (self.binx is not None
or self.biny is not None):
binError = True
if self.bin is None and (self.binx is None or self.biny is None):
binError = True
if self.bin == 0 or self.binx == 0 or self.biny == 0:
raise Exception("NONE OF THE BIN VALUES CAN BE 0")
if binError == True:
print('------------ERROR-------------')
print('YOU HAVE SET A DISALLOWED BIN CONFIGURATION')
print(
'ALLOWED CONFIGURATIONS: bin=value, binx=None,biny=None OR bin=None, binx=value1,biny=value2'
)
print('BY DEFAULT ALL ARE NONE AND THEN bin IS THEN SET TO 1')
sys.exit()
if self.bin is None and self.binx is None and self.biny is None:
self.bin = 1
self.binx = 1
self.biny = 1
if self.bin is not None:
self.binx = self.bin
self.biny = self.bin
x1, x2, y1, y2 = self.imageParams
if self.camName == 'FAR':
# if self.binx<0 or self.binx>16 or self.biny<0 or self.biny>16:
# print('----------ERROR-------------')
# print('VALID RANGE OF BINNING FOR FLI CAMERA IS 1 TO 16')
# gv.error_Sound()
# sys.exit()
if self.expTime < 50:
print('----------ERROR-------------')
print('FLI CAMERA EXPOSURE MUST BE AT LEAST 50 ms')
gv.error_Sound()
sys.exit()
if self.camName == 'NEAR':
xMax = self.cameraObject.get_width_maximum()
yMax = self.cameraObject.get_height_maximum()
if self.camName == 'FAR':
xMax = 1024
yMax = 1024
if x1 < 0 or x2 < 0 or y1 < 0 or y2 < 0:
print('NO IMAGE DIMENSION VALUES CAN BE NEGATIVE')
gv.error_Sound()
sys.exit()
if x2 > xMax or y2 > yMax:
print('-------WARNING-----------')
print(
'ATTEMPTING TO USE AN IMAGE REGION THAT IS LARGER THAN AVAILABLE SIZE \n'
'MAXIMUM DIMENSIONS ARE: ' + str(xMax) + ',' + str(yMax))
print('CONFLICTING DIMENSION WILL BE CHANGED TO MAXIMUM')
print('-----------END OF WARNING------------')
gv.warning_Sound()
if x2 > xMax:
x2 = xMax
if y2 > yMax:
y2 = yMax
if x2 <= x1 or y2 <= y1:
print(
'END OF IMAGE REGION CANNOT BE BEFORE OR AT BEGINNING BEGINNING'
)
gv.error_Sound()
sys.exit()
if x1 == x2 or y1 == y2:
raise Exception(
'IMAGE BOUNDS CANNOT BE THE SAME. X1/=X2 AND Y1/=Y2')
#make image size and binning line up correctly
if self.camName == 'NEAR':
x1New = self.binx * 8 * (x1 // (self.binx * 8))
x2New = self.binx * 8 * (x2 // (self.binx * 8))
y1New = self.biny * 8 * (y1 // (self.biny * 8))
y2New = self.biny * 8 * (y2 // (self.biny * 8))
if x1New != x1 or x2New != x2 or y1New != y1 or y2New != y2:
print('----------WARNING-----------')
print(
'Image region for Ximea needs to be both even multiple of 8 as well as an even'
)
print('multiple of the bin size. Adusting now.')
print('Previous value [x1,x2,y1,y2]: ', [x1, x2, y1, y2])
x1 = x1New
x2 = x2New
y1 = y1New
y2 = y2New
print('New values are now [x1,x2,y1,y2]: ', [x1, x2, y1, y2])
print('---------------END OF WARNING---------------')
gv.warning_Sound()
elif self.camName == 'FAR':
x1New = self.binx * (x1 // self.binx)
x2New = self.binx * (x2 // self.binx)
y1New = self.biny * (y1 // self.biny)
y2New = self.biny * (y2 // self.biny)
if x1New != x1 or x2New != x2 or y1New != y1 or y2New != y2:
print('----------WARNING-----------')
print(
'Image region needs to be an even multiple of bin size. Adjusting now.'
)
print('Previous value [x1,x2,y1,y2]: ', [x1, x2, y1, y2])
x1 = x1New
x2 = x2New
y1 = y1New
y2 = y2New
print('New values are now [x1,x2,y1,y2]: ', [x1, x2, y1, y2])
print('---------------END OF WARNING---------------')
gv.warning_Sound()
#after massaging the parameters to work with the binning and other restrictions, it's possible that all value
#could now equal each other
if x1 == x2 or y1 == y2:
print('------------ERROR-------------')
print(
'AFTER ADJUSTING IMAGE PARAMETERS TO FIT CONSTRAINTS X OR Y IMAGE DIMENSIONS NOW EQUAL EACH OTHER'
)
print(
'PICK DIFFERENT IMAGE PARAMETERS THAT ARE SEPERATED BY MORE THAN A MULTIPLE OF THE PRODUCT OF '
)
print('BIN SIZE AND MINIMUM SEPERATION')
gv.error_Sound()
sys.exit()
self.imageParams = [x1, x2, y1,
y2] #change image params list to corrected values
def catch_Errors_Analysis(self):
fileName = self.anlFileNameBox.get()
folderPath = self.anlFolderPathBox.get()
try:
x1 = int(self.x1BoxAnl.get())
x2 = int(self.x2BoxAnl.get())
y1 = int(self.y1BoxAnl.get())
y2 = int(self.y2BoxAnl.get())
except:
print('---------ERROR-----------')
print(
'YOU MUST ENTER A NON NEGATIVE NUMBER IN THE IMAGE DIMENSION BOX.'
)
print(
'YOU MAY HAVE LEFT THEM BLANK OR ENTER A LETTER, A SPACE, OR SOME OTHER NON NUMBER CHARACTER'
)
gv.error_Sound()
sys.exit()
if x2 < x1 or y2 < y1:
print('---------ERROR-------------')
print('X2 AND Y2 MUST NOT BE SMALLER THAN X1 AND Y1')
gv.error_Sound()
sys.exit()
if x2 == x1 or y1 == y2:
print('-----------ERROR---------')
print('X2 AND Y2 CANNOT EQUAL X1 AND Y1')
gv.error_Sound()
sys.exit()
if folderPath == '':
print('-----ERROR-----------')
print('YOU HAVENT ENTERED ANYTHING FOR THE FOLDERPATH')
gv.error_Sound()
sys.exit()
if fileName == '':
print('-----ERROR-----------')
print('YOU HAVENT ENTERED ANYTHING FOR THE FOLDERPATH')
gv.error_Sound()
sys.exit()
if os.path.isdir(folderPath) == False:
print('-----ERROR-----------')
print('YOU HAVE ENTERED AN INVALID FOLDERPATH')
gv.error_Sound()
sys.exit()
def catch_Errors_Aquisition(self):
#this checks all the boxes that should be numbers to see if they contain a number. If this isn't done here
#then a less helpful error will be thrown when trying to convert nonsense into a number
tempList = []
tempList.append(self.x1NearBox.get())
tempList.append(self.x2NearBox.get())
tempList.append(self.y1NearBox.get())
tempList.append(self.y2NearBox.get())
tempList.append(self.x1FarBox.get())
tempList.append(self.x2FarBox.get())
tempList.append(self.y1FarBox.get())
tempList.append(self.y2FarBox.get())
tempList.append(self.expTimeFarBox.get())
tempList.append(self.expTimeNearBox.get())
tempList.append(self.expNumBox.get())
tempList.append(self.binSizeFarBoxX.get())
tempList.append(self.binSizeFarBoxY.get())
tempList.append(self.binSizeNearBox.get())
tempList.append(self.startVoltBox.get())
tempList.append(self.stopVoltBox.get())
for item in tempList:
if item == '':
print('----------ERROR-------------')
print(
'YOU HAVE NOTHING ENTERED FOR ONE OF THE CAMERA/IMAGE/SCAN PARAMETER BOXS'
)
gv.error_Sound()
sys.exit()
try:
float(item)
except:
print('----------ERROR-------------')
print(
'YOU HAVE ENTERED SOMETHING OTHER THAN A NUMBER FOR ONE OF THE CAMERA/IMAGE/SCAN PARAMETER BOXS'
)
print(
'ITS POSSIBLE THAT YOU ENTERED SOMETHING WITH A WEIRD FORMAT ALSO'
)
gv.error_Sound()
sys.exit()
folderPath = self.dataFolderPathBox.get()
fileName = self.dataFileNameBox.get()
if folderPath == '':
print('-----ERROR-----------')
print('YOU HAVENT ENTERED ANYTHING FOR THE FOLDERPATH')
gv.error_Sound()
sys.exit()
if fileName == '':
print('-----ERROR-----------')
print('YOU HAVENT ENTERED ANYTHING FOR THE FOLDERPATH')
gv.error_Sound()
sys.exit()
if os.path.isdir(folderPath) == False:
print('-----ERROR-----------')
print('YOU HAVE ENTERED AN INVALID FOLDERPATH')
gv.error_Sound()
sys.exit()
if os.path.isfile(folderPath + '\\' + fileName + 'Near.fits') == True:
print('-----ERROR-----------')
print('YOU ALREADY HAVE A FILE WITH THAT NAME IN THAT FOLDER')
gv.error_Sound()
sys.exit()
if os.path.isfile(folderPath + '\\' + fileName + 'Far.fits') == True:
print('-----ERROR-----------')
print('YOU ALREADY HAVE A FILE WITH THAT NAME IN THAT FOLDER')
gv.error_Sound()
sys.exit()