Esempio n. 1
0
    def test_pwr_squelch_001(self):
        # Test set/gets

        alpha = 0.0001

        thr1 = 10
        thr2 = 20
        ramp = 1
        ramp2 = 2
        gate = True
        gate2 = False

        op = analog.pwr_squelch_cc(thr1, alpha, ramp, gate)

        op.set_threshold(thr2)
        t = op.threshold()
        self.assertEqual(thr2, t)

        op.set_ramp(ramp2)
        r = op.ramp()
        self.assertEqual(ramp2, r)

        op.set_gate(gate2)
        g = op.gate()
        self.assertEqual(gate2, g)
Esempio n. 2
0
	def __init__(self, options, filename):
		gr.top_block.__init__(self)

		inf_str = None
		symbol_rate = 152.34e3
		sample_rate = 1e6
		
		#if len(options) != 0:
		#	inf_str = args[0]

		squelch = analog.pwr_squelch_cc(float(options.squelch), 0.1, 0, True)
		demod = analog.quadrature_demod_cf(1.0)
		cr = digital.clock_recovery_mm_ff(sample_rate/symbol_rate, 0.00765625, 0, 0.175, 0.005)
		slicer = digital.binary_slicer_fb()
		corr = digital.correlate_access_code_bb(AC, 3)
		sink = sniffer()

		if False:
			print "Reading from: " + inf_str
			src = blocks.file_source(gr.sizeof_gr_complex, inf_str, False)
		
		else:
			freqs = {
				'AA':917.0e6, 'AB':913.0e6, 'AC':914.0e6, 'AD':915.0e6,
				'BA':916.0e6, 'BB':919.0e6, 'BC':920.0e6, 'BD':921.0e6,
				'CA':922.0e6, 'CB':923.0e6, 'CC':907.0e6, 'CD':908.0e6,
				'DA':905.5e6, 'DB':909.0e6, 'DC':911.0e6, 'DD':910.0e6}

			frequency = freqs[options.channel]
			print "Channel: " + options.channel + " (" + str(frequency/1e6) + "MHz)"

			# Create a UHD device source
			src = uhd.usrp_source(device_addr=options.args, stream_args=uhd.stream_args('fc32', "sc16", args=""))

			# Set the subdevice spec
			if(options.spec):
				src.set_subdev_spec(options.spec, 0)

			# Set the antenna
			if(options.antenna):
				src.set_antenna(options.antenna, 0)

			# Set receiver sample rate
			src.set_samp_rate(options.samp_rate)

			# Set receive daughterboard gain
			if options.gain is None:
				g = src.get_gain_range()
				options.gain = float(g.start()+g.stop())/2
				print "Using mid-point gain of", options.gain, "(", g.start(), "-", g.stop(), ")"
				src.set_gain(options.gain)

			# Set frequency (tune request takes lo_offset)
			treq = uhd.tune_request(frequency)
			tr = src.set_center_freq(treq)
			if tr == None:
				sys.stderr.write('Failed to set center frequency\n')
				raise SystemExit, 1

		self.connect(src, squelch, demod, cr, slicer, corr, sink)
Esempio n. 3
0
    def __init__(self, chan_rate, threshold, freq):
        gr.hier_block2.__init__(self, "indri_radio_channel",
                                gr.io_signature(1, 1, gr.sizeof_gr_complex),
                                gr.io_signature(1, 1, gr.sizeof_float))

        self.chan_rate = chan_rate
        self.threshold = threshold
        self.freq = freq

        self.pwr_squelch = analog.pwr_squelch_cc(self.threshold, 0.001, 0,
                                                 True)

        self.nbfm_rx = analog.nbfm_rx(
            audio_rate=self.chan_rate,
            quad_rate=self.chan_rate,
            tau=75e-6,
            max_dev=6.25e3,
        )

        self.power_probe = analog.probe_avg_mag_sqrd_cf(self.threshold, 0.001)
        self.null_sink = blocks.null_sink(gr.sizeof_float)

        self.tg = 0
        self.closed_once = False  # have we de-squelched since tg assigned?

        self.power_samples = 0
        self.power_total = 0.0

        self.connect(self, self.power_probe, self.null_sink)

        self.connect(self, self.pwr_squelch, self.nbfm_rx, self)
Esempio n. 4
0
    def __init__(self, squelch, quad_rate, audio_rate, max_dev, out_scale,
                 freq, command):
        gr.hier_block2.__init__(self, "FMtoCommand",
                                gr.io_signature(1, 1, gr.sizeof_gr_complex),
                                gr.io_signature(0, 0, gr.sizeof_gr_complex))

        analog_pwr_squelch = analog.pwr_squelch_cc(squelch, 1e-4, 0, True)
        analog_nbfm_rx = analog.nbfm_rx(
            audio_rate=audio_rate,
            quad_rate=quad_rate,
            tau=75e-6,
            max_dev=max_dev,
        )
        rational_resampler = filter.rational_resampler_fff(
            interpolation=441,
            decimation=500,
            taps=None,
            fractional_bw=None,
        )
        blocks_float_to_short = blocks.float_to_short(1, out_scale)

        self.p = subprocess.Popen(command, shell=True, stdin=subprocess.PIPE)
        sink = blocks.file_descriptor_sink(gr.sizeof_short * 1,
                                           self.p.stdin.fileno())
        self.connect(self, (analog_pwr_squelch, 0))
        self.connect((analog_pwr_squelch, 0), (analog_nbfm_rx, 0))
        self.connect((analog_nbfm_rx, 0), (rational_resampler, 0))
        self.connect((rational_resampler, 0), (blocks_float_to_short, 0))
        self.connect((blocks_float_to_short, 0), (sink, 0))
Esempio n. 5
0
    def test_pwr_squelch_001(self):
        # Test set/gets

        alpha = 0.0001

        thr1 = 10
        thr2 = 20
        ramp = 1
        ramp2 = 2
        gate = True
        gate2 = False

        op = analog.pwr_squelch_cc(thr1, alpha, ramp, gate)

        op.set_threshold(thr2)
        t = op.threshold()
        self.assertEqual(thr2, t)

        op.set_ramp(ramp2)
        r = op.ramp()
        self.assertEqual(ramp2, r)

        op.set_gate(gate2)
        g = op.gate()
        self.assertEqual(gate2, g)
Esempio n. 6
0
    def __init__(self):
        grc_wxgui.top_block_gui.__init__(self, title="Sensado")
        _icon_path = "/usr/share/icons/hicolor/32x32/apps/gnuradio-grc.png"
        self.SetIcon(wx.Icon(_icon_path, wx.BITMAP_TYPE_ANY))

        ##################################################
        # Variables
        ##################################################
        self.umbral = umbral = 0
        self.samp_rate = samp_rate = 44000
        self.fc = fc = 0

        ##################################################
        # Blocks
        ##################################################
        self.usando_power_squelch = analog.pwr_squelch_cc(umbral, 1, 100, False)
        self.uhd_usrp_source_0 = uhd.usrp_source(
        	device_addr="",
        	stream_args=uhd.stream_args(
        		cpu_format="fc32",
        		channels=range(1),
        	),
        )
        self.uhd_usrp_source_0.set_samp_rate(samp_rate)
        self.uhd_usrp_source_0.set_center_freq(fc, 0)
        self.uhd_usrp_source_0.set_gain(0, 0)
        self.sensado_primario = analog.probe_avg_mag_sqrd_c(0, 1)

        ##################################################
        # Connections
        ##################################################
        self.connect((self.usando_power_squelch, 0), (self.sensado_primario, 0))
        self.connect((self.uhd_usrp_source_0, 0), (self.usando_power_squelch, 0))
Esempio n. 7
0
    def __init__(self, squelch, quad_rate, audio_rate, max_dev, out_scale, freq, command):
        gr.hier_block2.__init__(self, "FMtoCommand",
                                    gr.io_signature(1, 1, gr.sizeof_gr_complex),
                                    gr.io_signature(0, 0, gr.sizeof_gr_complex))

        analog_pwr_squelch = analog.pwr_squelch_cc(squelch, 1e-4, 0, True)
        analog_nbfm_rx = analog.nbfm_rx(
        	audio_rate = audio_rate,
            quad_rate = quad_rate,
        	tau = 75e-6,
        	max_dev = max_dev,
          )
        rational_resampler = filter.rational_resampler_fff(
            interpolation = 441,
            decimation = 500,
            taps = None,
            fractional_bw = None,
        )
        blocks_float_to_short = blocks.float_to_short(1, out_scale)

        self.p = subprocess.Popen(command, shell = True, stdin = subprocess.PIPE)
        sink = blocks.file_descriptor_sink(gr.sizeof_short*1, self.p.stdin.fileno())
        self.connect(self, (analog_pwr_squelch, 0))
        self.connect((analog_pwr_squelch, 0), (analog_nbfm_rx, 0))
        self.connect((analog_nbfm_rx, 0), (rational_resampler, 0))
        self.connect((rational_resampler, 0), (blocks_float_to_short, 0))
        self.connect((blocks_float_to_short, 0), (sink, 0))
Esempio n. 8
0
    def __init__(self, FH_seq):
        gr.top_block.__init__(self, "Test2")

        ##################################################
        # Variables
        ##################################################
        self.sql_on = sql_on = 0
        self.samp_rate = samp_rate = 2e6
        self.curr_chann_idx = 0
        self.FH_seq = FH_seq

        ##################################################
        # Blocks
        ##################################################
        self.analog_pwr_squelch_xx_1 = analog.pwr_squelch_cc(-20, 1, 25, False)
        self.uhd_usrp_source_0 = uhd.usrp_source(
            device_addr="addr=192.168.10.2",
            stream_args=uhd.stream_args(
                cpu_format="fc32",
                channels=range(1),
            ),
        )

        def _sql_on_probe():
            while True:
                val = self.analog_pwr_squelch_xx_1.unmuted()
                try:
                    self.set_sql_on(val)
                except AttributeError, e:
                    pass
                time.sleep((0.001))
    def __init__(self):
        gr.top_block.__init__(self, "Top Block")

        ##################################################
        # Variables
        ##################################################
        self.variable_slider_0 = variable_slider_0 = .846
        self.test = test = .005
        self.shift = shift = .906
        self.samp_rate_0 = samp_rate_0 = 1.2e6
        self.samp_rate = samp_rate = 1.2e6/4
        self.pows = pows = 1.3
        self.lpf = lpf = .724
        self.go = go = 0.564
        self.gm = gm = 1.61
        self.centre_freq = centre_freq = 439.95e6

        ##################################################
        # Blocks
        ##################################################
        self.rtlsdr_source_0 = osmosdr.source( args="numchan=" + str(1) + " " + "" )
        self.rtlsdr_source_0.set_sample_rate(samp_rate_0)
        self.rtlsdr_source_0.set_center_freq(439.9e6, 0)
        self.rtlsdr_source_0.set_freq_corr(0, 0)
        self.rtlsdr_source_0.set_dc_offset_mode(0, 0)
        self.rtlsdr_source_0.set_iq_balance_mode(2, 0)
        self.rtlsdr_source_0.set_gain_mode(False, 0)
        self.rtlsdr_source_0.set_gain(20, 0)
        self.rtlsdr_source_0.set_if_gain(10, 0)
        self.rtlsdr_source_0.set_bb_gain(10, 0)
        self.rtlsdr_source_0.set_antenna("", 0)
        self.rtlsdr_source_0.set_bandwidth(0, 0)
          
        self.low_pass_filter_1 = filter.fir_filter_fff(10, firdes.low_pass(
        	1, samp_rate, 2.56e3*lpf, (2.56e3/2)*lpf, firdes.WIN_HAMMING, 6.76))
        self.freq_xlating_fir_filter_xxx_0 = filter.freq_xlating_fir_filter_ccc(4, (firdes.low_pass_2(1,samp_rate_0,100e3,50e3,40)), 0, samp_rate_0)
        self.digital_clock_recovery_mm_xx_1 = digital.clock_recovery_mm_ff(11.6439*(1+test), 0.25*0.175*0.175*go, 0.5, 0.175*gm, 0.005*variable_slider_0)
        self.digital_binary_slicer_fb_0 = digital.binary_slicer_fb()
        self.blocks_add_const_vxx_0 = blocks.add_const_vff((-12*shift, ))
        self.blks2_tcp_sink_0 = grc_blks2.tcp_sink(
        	itemsize=gr.sizeof_char*1,
        	addr="127.0.0.1",
        	port=9000,
        	server=False,
        )
        self.analog_quadrature_demod_cf_0 = analog.quadrature_demod_cf(10)
        self.analog_pwr_squelch_xx_0 = analog.pwr_squelch_cc(-40*pows, .001, 0, False)

        ##################################################
        # Connections
        ##################################################
        self.connect((self.analog_pwr_squelch_xx_0, 0), (self.analog_quadrature_demod_cf_0, 0))    
        self.connect((self.analog_quadrature_demod_cf_0, 0), (self.low_pass_filter_1, 0))    
        self.connect((self.blocks_add_const_vxx_0, 0), (self.digital_clock_recovery_mm_xx_1, 0))    
        self.connect((self.digital_binary_slicer_fb_0, 0), (self.blks2_tcp_sink_0, 0))    
        self.connect((self.digital_clock_recovery_mm_xx_1, 0), (self.digital_binary_slicer_fb_0, 0))    
        self.connect((self.freq_xlating_fir_filter_xxx_0, 0), (self.analog_pwr_squelch_xx_0, 0))    
        self.connect((self.low_pass_filter_1, 0), (self.blocks_add_const_vxx_0, 0))    
        self.connect((self.rtlsdr_source_0, 0), (self.freq_xlating_fir_filter_xxx_0, 0))    
    def __init__(self, FH_seq):
        gr.top_block.__init__(self, "Test2")

        ##################################################
        # Variables
        ##################################################
        self.sql_on = sql_on = 0
        self.sql_on2 = sql_on2 = 0
        self.samp_rate = samp_rate = 2e6
        self.curr_chann_idx_0 = 0
        self.curr_chann_idx_1 = 0
        self.FH_seq = FH_seq

        ##################################################
        # Blocks
        ##################################################
        self.analog_pwr_squelch_xx_0 = analog.pwr_squelch_cc(-25, 1, 25, False)
        self.analog_pwr_squelch_xx_1 = analog.pwr_squelch_cc(-25, 1, 25, False)
        self.uhd_usrp_source_0 = uhd.usrp_source(
            device_addr="addr0=192.168.20.2, addr1=192.168.30.2",
            stream_args=uhd.stream_args(
                cpu_format="fc32",
                channels=range(2),
            ),
        )
        self.uhd_usrp_source_0.set_clock_source("mimo", 1)
        self.uhd_usrp_source_0.set_time_source("mimo", 1)
        self.uhd_usrp_source_0.set_samp_rate(samp_rate)
        self.uhd_usrp_source_0.set_center_freq(2.43064e9, 0)
        self.uhd_usrp_source_0.set_gain(0, 0)
        self.uhd_usrp_source_0.set_antenna("RX2", 0)
        self.uhd_usrp_source_0.set_center_freq(2.43064e9, 1)
        self.uhd_usrp_source_0.set_gain(0, 1)
        self.uhd_usrp_source_0.set_antenna("RX2", 1)

        def _sql_on_probe():
            while True:
                val = self.analog_pwr_squelch_xx_0.unmuted()
                try:
                    self.set_sql_on(val)
                except AttributeError, e:
                    pass
                time.sleep((0.001))
Esempio n. 11
0
    def __init__(self):
        grc_wxgui.top_block_gui.__init__(self, title="air band receiver")
        _icon_path = "/usr/share/icons/hicolor/32x32/apps/gnuradio-grc.png"
        self.SetIcon(wx.Icon(_icon_path, wx.BITMAP_TYPE_ANY))

        ##################################################
        # Variables
        ##################################################
        self.udp_dest_port = udp_dest_port = 8082
        self.udp_dest_host = udp_dest_host = "192.168.10.30"
        self.sql = sql = -10.0
        self.samp_rate = samp_rate = 2.4e6
        self.rfgain = rfgain = 49.5
        self.frq_corr = frq_corr = 30.0
        self.device_arg = device_arg = "rtl_tcp=192.168.10.109:1235"
        self.base_freq = base_freq = 120.5e6

        ##################################################
        # Blocks
        ##################################################
        self.osmosdr_source_0 = osmosdr.source( args="numchan=" + str(1) + " " + device_arg )
        self.osmosdr_source_0.set_sample_rate(samp_rate)
        self.osmosdr_source_0.set_center_freq(base_freq, 0)
        self.osmosdr_source_0.set_freq_corr(frq_corr, 0)
        self.osmosdr_source_0.set_dc_offset_mode(2, 0)
        self.osmosdr_source_0.set_iq_balance_mode(2, 0)
        self.osmosdr_source_0.set_gain_mode(True, 0)
        self.osmosdr_source_0.set_gain(rfgain, 0)
        self.osmosdr_source_0.set_if_gain(0, 0)
        self.osmosdr_source_0.set_bb_gain(0, 0)
        self.osmosdr_source_0.set_antenna('RX', 0)
        self.osmosdr_source_0.set_bandwidth(0, 0)

        self.freq_xlating_fir_filter_xxx_0 = filter.freq_xlating_fir_filter_ccc(50, (firdes.low_pass_2(1,samp_rate,25e3,10e3,40)), 0, samp_rate)
        self.blocks_udp_sink_0 = blocks.udp_sink(gr.sizeof_short*1, udp_dest_host, udp_dest_port, 1472, True)
        self.blocks_float_to_short_0 = blocks.float_to_short(1, 32767)
        self.analog_pwr_squelch_xx_0 = analog.pwr_squelch_cc(sql, 1e-4, 0, False)
        self.analog_am_demod_cf_0 = analog.am_demod_cf(
        	channel_rate=48e3,
        	audio_decim=1,
        	audio_pass=5000,
        	audio_stop=5500,
        )
        self.analog_agc2_xx_0 = analog.agc2_cc(1e-3, 1e-5, 1.0, 0)
        self.analog_agc2_xx_0.set_max_gain(5)

        ##################################################
        # Connections
        ##################################################
        self.connect((self.analog_agc2_xx_0, 0), (self.analog_pwr_squelch_xx_0, 0))
        self.connect((self.analog_am_demod_cf_0, 0), (self.blocks_float_to_short_0, 0))
        self.connect((self.analog_pwr_squelch_xx_0, 0), (self.analog_am_demod_cf_0, 0))
        self.connect((self.blocks_float_to_short_0, 0), (self.blocks_udp_sink_0, 0))
        self.connect((self.freq_xlating_fir_filter_xxx_0, 0), (self.analog_agc2_xx_0, 0))
        self.connect((self.osmosdr_source_0, 0), (self.freq_xlating_fir_filter_xxx_0, 0))
Esempio n. 12
0
    def __init__(self, FH_seq):
        gr.top_block.__init__(self, "Test2")

        ##################################################
        # Variables
        ##################################################
        self.sql_on = sql_on = 0
        self.samp_rate = samp_rate = 2e6
        self.curr_chann_idx = 0
        self.FH_seq = FH_seq

        ##################################################
        # Blocks
        ##################################################
        #self.analog_noise_source = analog.noise_source_c(analog.GR_GAUSSIAN, 0)
        self.cosine_source = analog.sig_source_c(samp_rate, analog.GR_COS_WAVE,
                                                 1000, 1, 0)
        self.analog_pwr_squelch_xx_1 = analog.pwr_squelch_cc(-30, 1, 25, False)
        self.uhd_usrp_source_0 = uhd.usrp_source(
            device_addr="addr=192.168.30.2",
            stream_args=uhd.stream_args(
                cpu_format="fc32",
                channels=range(1),
            ),
        )
        self.uhd_usrp_source_0.set_subdev_spec("A:0", 0)
        self.uhd_usrp_source_0.set_samp_rate(samp_rate)
        self.uhd_usrp_source_0.set_center_freq(2.43665e9, 0)
        self.uhd_usrp_source_0.set_gain(0, 0)
        self.uhd_usrp_source_0.set_antenna("RX2", 0)
        self.uhd_usrp_sink = uhd.usrp_sink(
            device_addr="addr=192.168.30.2",
            stream_args=uhd.stream_args(
                cpu_format="fc32",
                channels=range(1),
            ),
        )
        self.uhd_usrp_sink.set_subdev_spec("A:0", 0)
        self.uhd_usrp_sink.set_samp_rate(samp_rate)
        self.uhd_usrp_sink.set_center_freq(2.43665e9, 0)
        self.uhd_usrp_sink.set_gain(31.5, 0)
        self.uhd_usrp_sink.set_antenna("TX/RX", 0)

        def _sql_on_probe():
            while True:
                val = self.analog_pwr_squelch_xx_1.unmuted()
                try:
                    self.set_sql_on(val)
                except AttributeError, e:
                    pass
                time.sleep((0.001))
Esempio n. 13
0
    def __init__(self, samp_rate_in, samp_rate_out, center_freq, tune_freq,
                 channel_width, transition_width, threshold, fsk_deviation,
                 fskSquelch, iq_filename, dig_out_filename):
        gr.top_block.__init__(self)

        ##################################################
        # Variables
        ##################################################
        self.cutoff_freq = channel_width / 2
        self.firdes_taps = firdes.low_pass(1, samp_rate_in, self.cutoff_freq,
                                           transition_width)

        ##################################################
        # Blocks
        ##################################################
        self.blocks_file_source_0 = blocks.file_source(
            gr.sizeof_gr_complex * 1, iq_filename, False)
        self.blocks_tuning_filter_0 = filter.freq_xlating_fir_filter_ccc(
            int(samp_rate_in / samp_rate_out), (self.firdes_taps),
            tune_freq - center_freq, samp_rate_in)
        self.analog_pwr_squelch_xx_0 = analog.pwr_squelch_cc(
            fskSquelch, 1, 1, False)
        self.blocks_quadrature_demod_0 = analog.quadrature_demod_cf(
            samp_rate_out / (2 * pi * fsk_deviation / 2))
        self.blocks_add_const_vxx_0 = blocks.add_const_vff((-1 * threshold, ))
        self.blocks_digital_binary_slicer_fb_0 = digital.binary_slicer_fb()

        # swapped message sink for file sink
        #self.blocks_file_sink_0 = blocks.file_sink(gr.sizeof_char*1, dig_out_filename, False)
        #self.blocks_file_sink_0.set_unbuffered(False)
        self.sink_queue = gr.msg_queue()
        self.blocks_message_sink_0 = blocks.message_sink(
            gr.sizeof_char * 1, self.sink_queue, False)

        ##################################################
        # Connections
        ##################################################
        self.connect((self.blocks_file_source_0, 0),
                     (self.blocks_tuning_filter_0, 0))
        self.connect((self.blocks_tuning_filter_0, 0),
                     (self.analog_pwr_squelch_xx_0, 0))
        self.connect((self.analog_pwr_squelch_xx_0, 0),
                     (self.blocks_quadrature_demod_0, 0))
        self.connect((self.blocks_quadrature_demod_0, 0),
                     (self.blocks_add_const_vxx_0, 0))
        self.connect((self.blocks_add_const_vxx_0, 0),
                     (self.blocks_digital_binary_slicer_fb_0, 0))

        #self.connect((self.digital_binary_slicer_fb_0, 0), (self.blocks_file_sink_0, 0))
        self.connect((self.blocks_digital_binary_slicer_fb_0, 0),
                     (self.blocks_message_sink_0, 0))
Esempio n. 14
0
    def __init__(self, f_in, f_out, base_freq, freq_offset, samp_rate, bit_rate):
        gr.top_block.__init__(self, "Demod Fsk Gen")

        ##################################################
        # Variables
        ##################################################
        self.samp_rate = samp_rate
        self.bit_rate = bit_rate
        self.samp_per_sym = samp_per_sym = int(samp_rate/bit_rate)
        self.fxff_decimation = fxff_decimation = 1
        self.fsk_deviation_hz = fsk_deviation_hz = 160000
        self.freq_offset = freq_offset
        self.base_freq = base_freq
        if not f_out:
            f_out = f_in + '.demod'

        ##################################################
        # Blocks
        ##################################################
        self.low_pass_filter_0 = filter.fir_filter_fff(1, firdes.low_pass(
        	1, samp_rate/fxff_decimation, bit_rate*0.8, bit_rate*.2, firdes.WIN_BLACKMAN, 6.76))
        self.freq_xlating_fir_filter_xxx_0 = filter.freq_xlating_fir_filter_ccc(fxff_decimation, (firdes.low_pass(1, samp_rate, bit_rate*1.1, bit_rate*.4,  firdes.WIN_BLACKMAN, 6.76)), freq_offset, samp_rate)
        self.blocks_uchar_to_float_0 = blocks.uchar_to_float()
        self.blocks_throttle_0 = blocks.throttle(gr.sizeof_gr_complex*1, samp_rate/32,True)
        self.blocks_float_to_complex_0 = blocks.float_to_complex(1)
        self.blocks_float_to_char_0 = blocks.float_to_char(1, 1)
        self.blocks_file_source_0 = blocks.file_source(gr.sizeof_char*1, f_in, False)
        self.blocks_file_sink_0 = blocks.file_sink(gr.sizeof_char*1, f_out, False)
        self.blocks_file_sink_0.set_unbuffered(False)
        self.blocks_deinterleave_0 = blocks.deinterleave(gr.sizeof_float*1)
        self.analog_quadrature_demod_cf_0 = analog.quadrature_demod_cf(samp_rate/(2*math.pi*fsk_deviation_hz/8.0)/fxff_decimation)
        self.analog_pwr_squelch_xx_0 = analog.pwr_squelch_cc(30, 0.3, 0, False)

        ##################################################
        # Connections
        ##################################################
        self.connect((self.blocks_file_source_0, 0), (self.blocks_uchar_to_float_0, 0))
        self.connect((self.blocks_uchar_to_float_0, 0), (self.blocks_deinterleave_0, 0))
        self.connect((self.blocks_deinterleave_0, 0), (self.blocks_float_to_complex_0, 0))
        self.connect((self.blocks_deinterleave_0, 1), (self.blocks_float_to_complex_0, 1))
        self.connect((self.blocks_float_to_complex_0, 0), (self.blocks_throttle_0, 0))
        self.connect((self.blocks_throttle_0, 0), (self.freq_xlating_fir_filter_xxx_0, 0))
        self.connect((self.low_pass_filter_0, 0), (self.blocks_float_to_char_0, 0))
        self.connect((self.analog_quadrature_demod_cf_0, 0), (self.low_pass_filter_0, 0))
        self.connect((self.blocks_float_to_char_0, 0), (self.blocks_file_sink_0, 0))
        self.connect((self.freq_xlating_fir_filter_xxx_0, 0), (self.analog_pwr_squelch_xx_0, 0))
        self.connect((self.analog_pwr_squelch_xx_0, 0), (self.analog_quadrature_demod_cf_0, 0))
Esempio n. 15
0
    def __init__(self,
                 squelch,
                 ch_width,
                 max_dev,
                 out_scale,
                 freq,
                 command,
                 do_audio=False):
        gr.hier_block2.__init__(self, "FMtoCommand",
                                gr.io_signature(1, 1, gr.sizeof_gr_complex),
                                gr.io_signature(0, 0, gr.sizeof_gr_complex))

        self.analog_pwr_squelch = analog.pwr_squelch_cc(squelch, 1e-4, 0, True)
        self.analog_nbfm_rx = analog.nbfm_rx(
            audio_rate=ch_width,
            quad_rate=ch_width,
            tau=75e-6,
            max_dev=max_dev,
        )
        self.blocks_float_to_short = blocks.float_to_short(1, out_scale)
        # OSX: if you get Resource Temporarily Unavailable you probably need to increase maxproc, eg
        # sudo launchctl limit maxproc 2000 3000
        logger.debug("Channel %.3f: Starting %s" % (freq / 1e6, str(command)))
        self.p = subprocess.Popen(command,
                                  shell=True,
                                  stdin=subprocess.PIPE,
                                  stdout=subprocess.PIPE)
        self.sink = blocks.file_descriptor_sink(gr.sizeof_short * 1,
                                                self.p.stdin.fileno())
        self.connect(self, (self.analog_pwr_squelch, 0))
        self.connect((self.analog_pwr_squelch, 0), (self.analog_nbfm_rx, 0))
        self.connect((self.analog_nbfm_rx, 0), (self.blocks_float_to_short, 0))
        self.connect((self.blocks_float_to_short, 0), (self.sink, 0))
        if do_audio:
            self.resampler = grfilter.rational_resampler_fff(
                interpolation=441,
                decimation=425,
                taps=None,
                fractional_bw=None)
            self.mult = blocks.multiply_const_vff((0.2, ))
            self.audio_sink = audio.sink(22050, '', True)
            self.connect((self.analog_nbfm_rx, 0), (self.resampler, 0))
            self.connect((self.resampler, 0), (self.mult, 0))
            self.connect((self.mult, 0), (self.audio_sink, 0))
Esempio n. 16
0
    def test_pwr_squelch_002(self):
        # Test runtime, gate=True
        alpha = 0.0001
        thr = -25

        src_data = [float(x) / 10.0 for x in range(1, 40)]
        src = blocks.vector_source_c(src_data)
        op = analog.pwr_squelch_cc(thr, alpha)
        dst = blocks.vector_sink_c()

        self.tb.connect(src, op)
        self.tb.connect(op, dst)
        self.tb.run()

        expected_result = src_data
        expected_result[0:20] = 20*[0,]

        result_data = dst.data()
        self.assertComplexTuplesAlmostEqual(expected_result, result_data, 4)
Esempio n. 17
0
    def test_pwr_squelch_002(self):
        # Test runtime, gate=True
        alpha = 0.0001
        thr = -25

        src_data = map(lambda x: float(x)/10.0, range(1, 40))
        src = blocks.vector_source_c(src_data)
        op = analog.pwr_squelch_cc(thr, alpha)
        dst = blocks.vector_sink_c()

        self.tb.connect(src, op)
        self.tb.connect(op, dst)
        self.tb.run()

        expected_result = src_data
        expected_result[0:20] = 20*[0,]

        result_data = dst.data()
        self.assertComplexTuplesAlmostEqual(expected_result, result_data, 4)
Esempio n. 18
0
    def __init__(self, rf_params, bb_params, working_samp_rate):
        gr.hier_block2.__init__(
            self,
            "RX Demod Block",
            gr.io_signature(1, 1, gr.sizeof_gr_complex * 1),  # single in
            gr.io_signature(1, 1, gr.sizeof_char * 1)  # single out
        )

        ##################################################
        # Parameters
        ##################################################
        # ADD VALIDITY CHECKS TO EACH OF THESE
        self.symbol_time = bb_params.symbol_time
        self.working_samp_rate = working_samp_rate
        self.fsk_dev = rf_params.fsk_dev

        ##################################################
        # Variables
        ##################################################
        self.sps = int(self.symbol_time * self.working_samp_rate)
        self.sensitivity = 2 * 3.1415 * self.fsk_dev / self.working_samp_rate

        ##################################################
        # Blocks
        ##################################################
        self.analog_pwr_squelch_xx_0 = analog.pwr_squelch_cc(
            rfm.PWR_SQUELCH_DB, 1e-4, 0, False)
        self.connect((self, 0), (self.analog_pwr_squelch_xx_0, 0))
        self.digital_gfsk_demod_0 = digital.gfsk_demod(
            samples_per_symbol=self.sps,
            sensitivity=self.sensitivity,
            gain_mu=0.175,
            mu=0.5,
            omega_relative_limit=0.005,
            freq_error=0.0,
            verbose=False,
            log=False,
        )
        self.connect((self.analog_pwr_squelch_xx_0, 0),
                     (self.digital_gfsk_demod_0, 0))

        # output from block
        self.connect((self.digital_gfsk_demod_0, 0), (self, 0))
    def __init__(self, frame, panel, vbox, argv):
        stdgui2.std_top_block.__init__(self, frame, panel, vbox, argv)

        sample_rate = 2e6
        center_freq = 300e6
        filename = '/home/sdr/Desktop/Lab/Labs/Multicode/multi_code_300MHz_2Mss.raw'

        fsrc = blocks.file_source(gr.sizeof_gr_complex, filename, True)
        throt = blocks.throttle(gr.sizeof_gr_complex, sample_rate)
        c_to_m = blocks.complex_to_mag()
        #scope = scopesink2.scope_sink_f(panel, sample_rate=sample_rate, size=(1200,800))
        rat = filter.fir_filter_ccc(100, filter.firdes.low_pass_2(1, sample_rate, 1000000, 500000, 100))
        detector = detect_opener_bits()
        squelch = analog.pwr_squelch_cc(-60,1,0,False)
        slicer = digital.binary_slicer_fb() 
        add = blocks.add_const_vff((-.003, ))
        self.connect(fsrc, throt)
        self.connect(throt, rat)
        self.connect(rat, c_to_m)
        self.connect(c_to_m, add)
        self.connect(add, slicer)
        #self.connect(c_to_m, scope)
        self.connect(slicer, detector)
    def __init__(self, FH_seq, start_chann_idx):
        gr.top_block.__init__(self, "Sequence Follower")

        ##################################################
        # Variables
        ##################################################
        self.sql_on = sql_on = 0
        self.samp_rate = samp_rate = 32000
        self.curr_chann_idx = start_chann_idx
        self.FH_seq = FH_seq 
        ##################################################
        # Blocks
        ##################################################
        self.analog_pwr_squelch_xx_0 = analog.pwr_squelch_cc(-10, 1, 25, False)
        def _sql_on_probe():
        	while True:
        		val = self.analog_pwr_squelch_xx_0.unmuted()
        		try: self.set_sql_on(val)
        		except AttributeError, e: pass
        		time.sleep(1.0/(100))
        _sql_on_thread = threading.Thread(target=_sql_on_probe)
        _sql_on_thread.daemon = True
        _sql_on_thread.start()
        self.freq_xlating_fir_filter_xxx_0 = filter.freq_xlating_fir_filter_ccf(64, ( [0.0027054441161453724, 0.002875175094231963, 0.0033175654243677855, 0.004034834913909435, 0.005023509729653597, 0.006274390500038862, 0.007772639859467745, 0.009498009458184242, 0.011425167322158813, 0.013524158857762814, 0.015760963782668114, 0.01809815689921379, 0.020495640113949776, 0.02291143871843815, 0.025302572175860405, 0.027625905349850655, 0.02983906865119934, 0.03190131485462189, 0.03377437964081764, 0.035423289984464645, 0.03681709244847298, 0.03792952373623848, 0.038739532232284546, 0.03923177719116211, 0.039396900683641434, 0.03923177719116211, 0.038739532232284546, 0.03792952373623848, 0.03681709244847298, 0.035423289984464645, 0.03377437964081764, 0.03190131485462189, 0.02983906865119934, 0.027625905349850655, 0.025302572175860405, 0.02291143871843815, 0.020495640113949776, 0.01809815689921379, 0.015760963782668114, 0.013524158857762814, 0.011425167322158813, 0.009498009458184242, 0.007772639859467745, 0.006274390500038862, 0.005023509729653597, 0.004034834913909435, 0.0033175654243677855, 0.002875175094231963, 0.0027054441161453724]), 1000, samp_rate)
        self.blocks_throttle_0 = blocks.throttle(gr.sizeof_gr_complex*1, samp_rate)
        self.blocks_file_source_0 = blocks.file_source(gr.sizeof_gr_complex*1, "/home/hocheol/GRC/Sample/FHSS_Sig", True)

        self.blocks_file_sink_0 = blocks.file_sink(gr.sizeof_gr_complex*1, "/home/hocheol/GRC/Sample/FHSS_Demodulated.cfloat", False)
        self.blocks_file_sink_0.set_unbuffered(True)

        ##################################################
        # Connections
        ##################################################
        self.connect((self.blocks_file_source_0, 0), (self.blocks_throttle_0, 0))
        self.connect((self.blocks_throttle_0, 0), (self.freq_xlating_fir_filter_xxx_0, 0))
        self.connect((self.freq_xlating_fir_filter_xxx_0, 0), (self.analog_pwr_squelch_xx_0, 0))
        self.connect((self.analog_pwr_squelch_xx_0, 0), (self.blocks_file_sink_0, 0))
Esempio n. 21
0
    def __init__(self):
        gr.top_block.__init__(self, "NBFM")
        Qt.QWidget.__init__(self)
        self.setWindowTitle("NBFM")
        try:
            self.setWindowIcon(Qt.QIcon.fromTheme('gnuradio-grc'))
        except:
            pass
        self.top_scroll_layout = Qt.QVBoxLayout()
        self.setLayout(self.top_scroll_layout)
        self.top_scroll = Qt.QScrollArea()
        self.top_scroll.setFrameStyle(Qt.QFrame.NoFrame)
        self.top_scroll_layout.addWidget(self.top_scroll)
        self.top_scroll.setWidgetResizable(True)
        self.top_widget = Qt.QWidget()
        self.top_scroll.setWidget(self.top_widget)
        self.top_layout = Qt.QVBoxLayout(self.top_widget)
        self.top_grid_layout = Qt.QGridLayout()
        self.top_layout.addLayout(self.top_grid_layout)

        self.settings = Qt.QSettings("GNU Radio", "nbfm")
        self.restoreGeometry(self.settings.value("geometry").toByteArray())

        ##################################################
        # Variables
        ##################################################
        self.radio_freq = radio_freq = 100
        self.volume = volume = 5
        self.squelch = squelch = -30
        self.samp_rate = samp_rate = 240e4
        self.rf_gain = rf_gain = 10
        self.freq = freq = radio_freq * 1000000

        ##################################################
        # Blocks
        ##################################################
        self._volume_range = Range(0, 10, 1, 5, 200)
        self._volume_win = RangeWidget(self._volume_range, self.set_volume,
                                       "Volume", "counter_slider", float)
        self.top_layout.addWidget(self._volume_win)
        self._squelch_range = Range(-70, 0, 10, -30, 200)
        self._squelch_win = RangeWidget(self._squelch_range, self.set_squelch,
                                        "Squelch", "counter_slider", int)
        self.top_layout.addWidget(self._squelch_win)
        self._rf_gain_range = Range(0, 50, 1, 10, 200)
        self._rf_gain_win = RangeWidget(self._rf_gain_range, self.set_rf_gain,
                                        "RF Gain", "counter_slider", float)
        self.top_layout.addWidget(self._rf_gain_win)
        self.rtlsdr_source_0 = osmosdr.source(args="numchan=" + str(1) + " " +
                                              "")
        self.rtlsdr_source_0.set_sample_rate(samp_rate)
        self.rtlsdr_source_0.set_center_freq(freq, 0)
        self.rtlsdr_source_0.set_freq_corr(0, 0)
        self.rtlsdr_source_0.set_dc_offset_mode(0, 0)
        self.rtlsdr_source_0.set_iq_balance_mode(0, 0)
        self.rtlsdr_source_0.set_gain_mode(False, 0)
        self.rtlsdr_source_0.set_gain(rf_gain, 0)
        self.rtlsdr_source_0.set_if_gain(20, 0)
        self.rtlsdr_source_0.set_bb_gain(20, 0)
        self.rtlsdr_source_0.set_antenna("", 0)
        self.rtlsdr_source_0.set_bandwidth(0, 0)

        self.rational_resampler_xxx_1_0 = filter.rational_resampler_fff(
            interpolation=60,
            decimation=35,
            taps=None,
            fractional_bw=None,
        )
        self._radio_freq_tool_bar = Qt.QToolBar(self)
        self._radio_freq_tool_bar.addWidget(Qt.QLabel("Frequency (MHz)" +
                                                      ": "))
        self._radio_freq_line_edit = Qt.QLineEdit(str(self.radio_freq))
        self._radio_freq_tool_bar.addWidget(self._radio_freq_line_edit)
        self._radio_freq_line_edit.returnPressed.connect(
            lambda: self.set_radio_freq(
                eng_notation.str_to_num(
                    str(self._radio_freq_line_edit.text().toAscii()))))
        self.top_layout.addWidget(self._radio_freq_tool_bar)
        self.qtgui_waterfall_sink_x_0 = qtgui.waterfall_sink_c(
            1024,  #size
            firdes.WIN_BLACKMAN_hARRIS,  #wintype
            freq,  #fc
            samp_rate,  #bw
            "",  #name
            1  #number of inputs
        )
        self.qtgui_waterfall_sink_x_0.set_update_time(0.10)
        self.qtgui_waterfall_sink_x_0.enable_grid(False)

        if not True:
            self.qtgui_waterfall_sink_x_0.disable_legend()

        if complex == type(float()):
            self.qtgui_waterfall_sink_x_0.set_plot_pos_half(not True)

        labels = ["", "", "", "", "", "", "", "", "", ""]
        colors = [0, 0, 0, 0, 0, 0, 0, 0, 0, 0]
        alphas = [1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0]
        for i in xrange(1):
            if len(labels[i]) == 0:
                self.qtgui_waterfall_sink_x_0.set_line_label(
                    i, "Data {0}".format(i))
            else:
                self.qtgui_waterfall_sink_x_0.set_line_label(i, labels[i])
            self.qtgui_waterfall_sink_x_0.set_color_map(i, colors[i])
            self.qtgui_waterfall_sink_x_0.set_line_alpha(i, alphas[i])

        self.qtgui_waterfall_sink_x_0.set_intensity_range(-140, 10)

        self._qtgui_waterfall_sink_x_0_win = sip.wrapinstance(
            self.qtgui_waterfall_sink_x_0.pyqwidget(), Qt.QWidget)
        self.top_layout.addWidget(self._qtgui_waterfall_sink_x_0_win)
        self.qtgui_freq_sink_x_0 = qtgui.freq_sink_c(
            1024,  #size
            firdes.WIN_BLACKMAN_hARRIS,  #wintype
            freq,  #fc
            samp_rate,  #bw
            "",  #name
            1  #number of inputs
        )
        self.qtgui_freq_sink_x_0.set_update_time(0.10)
        self.qtgui_freq_sink_x_0.set_y_axis(-140, 10)
        self.qtgui_freq_sink_x_0.set_trigger_mode(qtgui.TRIG_MODE_FREE, 0.0, 0,
                                                  "")
        self.qtgui_freq_sink_x_0.enable_autoscale(False)
        self.qtgui_freq_sink_x_0.enable_grid(False)
        self.qtgui_freq_sink_x_0.set_fft_average(1.0)
        self.qtgui_freq_sink_x_0.enable_control_panel(False)

        if not True:
            self.qtgui_freq_sink_x_0.disable_legend()

        if complex == type(float()):
            self.qtgui_freq_sink_x_0.set_plot_pos_half(not True)

        labels = ["", "", "", "", "", "", "", "", "", ""]
        widths = [1, 1, 1, 1, 1, 1, 1, 1, 1, 1]
        colors = [
            "blue", "red", "green", "black", "cyan", "magenta", "yellow",
            "dark red", "dark green", "dark blue"
        ]
        alphas = [1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0]
        for i in xrange(1):
            if len(labels[i]) == 0:
                self.qtgui_freq_sink_x_0.set_line_label(
                    i, "Data {0}".format(i))
            else:
                self.qtgui_freq_sink_x_0.set_line_label(i, labels[i])
            self.qtgui_freq_sink_x_0.set_line_width(i, widths[i])
            self.qtgui_freq_sink_x_0.set_line_color(i, colors[i])
            self.qtgui_freq_sink_x_0.set_line_alpha(i, alphas[i])

        self._qtgui_freq_sink_x_0_win = sip.wrapinstance(
            self.qtgui_freq_sink_x_0.pyqwidget(), Qt.QWidget)
        self.top_layout.addWidget(self._qtgui_freq_sink_x_0_win)
        self.low_pass_filter_0_0 = filter.fir_filter_ccf(
            8,
            firdes.low_pass(1, samp_rate, 5000, 8000, firdes.WIN_HAMMING,
                            6.76))
        self.blocks_multiply_const_vxx_0 = blocks.multiply_const_vff(
            (volume, ))
        self.audio_sink_0 = audio.sink(48000, "", True)
        self.analog_pwr_squelch_xx_0 = analog.pwr_squelch_cc(
            squelch, 1e-4, 0, True)
        self.analog_nbfm_rx_0 = analog.nbfm_rx(
            audio_rate=30000,
            quad_rate=300000,
            tau=75e-6,
            max_dev=12.5e3,
        )

        ##################################################
        # Connections
        ##################################################
        self.connect((self.analog_nbfm_rx_0, 0),
                     (self.rational_resampler_xxx_1_0, 0))
        self.connect((self.analog_pwr_squelch_xx_0, 0),
                     (self.low_pass_filter_0_0, 0))
        self.connect((self.blocks_multiply_const_vxx_0, 0),
                     (self.audio_sink_0, 0))
        self.connect((self.low_pass_filter_0_0, 0), (self.analog_nbfm_rx_0, 0))
        self.connect((self.rational_resampler_xxx_1_0, 0),
                     (self.blocks_multiply_const_vxx_0, 0))
        self.connect((self.rtlsdr_source_0, 0),
                     (self.analog_pwr_squelch_xx_0, 0))
        self.connect((self.rtlsdr_source_0, 0), (self.qtgui_freq_sink_x_0, 0))
        self.connect((self.rtlsdr_source_0, 0),
                     (self.qtgui_waterfall_sink_x_0, 0))
Esempio n. 22
0
    def __init__(self):
        grc_wxgui.top_block_gui.__init__(self, title="Nbfm Wav Out")

        ##################################################
        # Variables
        ##################################################
        self.decim = decim = 2
        self.adc_rate = adc_rate = 2000000
        self.xlate_offset_fine = xlate_offset_fine = 4000
        self.xlate_offset = xlate_offset = 0
        self.xlate_decim = xlate_decim = 4
        self.xlate_bandwidth = xlate_bandwidth = 12500
        self.volume = volume = 1
        self.squelch = squelch = 50
        self.samp_rate = samp_rate = adc_rate/decim
        self.main_freq = main_freq = 167.99e6
        self.audio_rate = audio_rate = 48000
        self.audio_interp = audio_interp = 4

        ##################################################
        # Blocks
        ##################################################
        self.main_notebook = self.main_notebook = wx.Notebook(self.GetWin(), style=wx.NB_TOP)
        self.main_notebook.AddPage(grc_wxgui.Panel(self.main_notebook), "Baseband")
        self.main_notebook.AddPage(grc_wxgui.Panel(self.main_notebook), "Scope")
        self.main_notebook.AddPage(grc_wxgui.Panel(self.main_notebook), "Waterfall")
        self.main_notebook.AddPage(grc_wxgui.Panel(self.main_notebook), "Quad demod")
        self.Add(self.main_notebook)
        _xlate_offset_fine_sizer = wx.BoxSizer(wx.VERTICAL)
        self._xlate_offset_fine_text_box = forms.text_box(
        	parent=self.main_notebook.GetPage(0).GetWin(),
        	sizer=_xlate_offset_fine_sizer,
        	value=self.xlate_offset_fine,
        	callback=self.set_xlate_offset_fine,
        	label="Fine Offset",
        	converter=forms.float_converter(),
        	proportion=0,
        )
        self._xlate_offset_fine_slider = forms.slider(
        	parent=self.main_notebook.GetPage(0).GetWin(),
        	sizer=_xlate_offset_fine_sizer,
        	value=self.xlate_offset_fine,
        	callback=self.set_xlate_offset_fine,
        	minimum=-10000,
        	maximum=10000,
        	num_steps=100,
        	style=wx.SL_HORIZONTAL,
        	cast=float,
        	proportion=1,
        )
        self.main_notebook.GetPage(0).Add(_xlate_offset_fine_sizer)
        self._xlate_offset_text_box = forms.text_box(
        	parent=self.main_notebook.GetPage(0).GetWin(),
        	value=self.xlate_offset,
        	callback=self.set_xlate_offset,
        	label="Xlate Offset",
        	converter=forms.float_converter(),
        )
        self.main_notebook.GetPage(0).Add(self._xlate_offset_text_box)
        _xlate_bandwidth_sizer = wx.BoxSizer(wx.VERTICAL)
        self._xlate_bandwidth_text_box = forms.text_box(
        	parent=self.main_notebook.GetPage(0).GetWin(),
        	sizer=_xlate_bandwidth_sizer,
        	value=self.xlate_bandwidth,
        	callback=self.set_xlate_bandwidth,
        	label="Xlate Bandwidth",
        	converter=forms.float_converter(),
        	proportion=0,
        )
        self._xlate_bandwidth_slider = forms.slider(
        	parent=self.main_notebook.GetPage(0).GetWin(),
        	sizer=_xlate_bandwidth_sizer,
        	value=self.xlate_bandwidth,
        	callback=self.set_xlate_bandwidth,
        	minimum=2500,
        	maximum=250000,
        	num_steps=100,
        	style=wx.SL_HORIZONTAL,
        	cast=float,
        	proportion=1,
        )
        self.main_notebook.GetPage(0).Add(_xlate_bandwidth_sizer)
        _volume_sizer = wx.BoxSizer(wx.VERTICAL)
        self._volume_text_box = forms.text_box(
        	parent=self.GetWin(),
        	sizer=_volume_sizer,
        	value=self.volume,
        	callback=self.set_volume,
        	label='volume',
        	converter=forms.float_converter(),
        	proportion=0,
        )
        self._volume_slider = forms.slider(
        	parent=self.GetWin(),
        	sizer=_volume_sizer,
        	value=self.volume,
        	callback=self.set_volume,
        	minimum=0,
        	maximum=10,
        	num_steps=100,
        	style=wx.SL_HORIZONTAL,
        	cast=float,
        	proportion=1,
        )
        self.Add(_volume_sizer)
        _squelch_sizer = wx.BoxSizer(wx.VERTICAL)
        self._squelch_text_box = forms.text_box(
        	parent=self.GetWin(),
        	sizer=_squelch_sizer,
        	value=self.squelch,
        	callback=self.set_squelch,
        	label='squelch',
        	converter=forms.float_converter(),
        	proportion=0,
        )
        self._squelch_slider = forms.slider(
        	parent=self.GetWin(),
        	sizer=_squelch_sizer,
        	value=self.squelch,
        	callback=self.set_squelch,
        	minimum=0,
        	maximum=100,
        	num_steps=100,
        	style=wx.SL_HORIZONTAL,
        	cast=float,
        	proportion=1,
        )
        self.Add(_squelch_sizer)
        self._main_freq_text_box = forms.text_box(
        	parent=self.main_notebook.GetPage(0).GetWin(),
        	value=self.main_freq,
        	callback=self.set_main_freq,
        	label="Main Freq",
        	converter=forms.float_converter(),
        )
        self.main_notebook.GetPage(0).Add(self._main_freq_text_box)
        self.rtlsdr_source_0 = osmosdr.source( args="numchan=" + str(1) + " " + "" )
        self.rtlsdr_source_0.set_sample_rate(samp_rate)
        self.rtlsdr_source_0.set_center_freq(main_freq, 0)
        self.rtlsdr_source_0.set_freq_corr(0, 0)
        self.rtlsdr_source_0.set_dc_offset_mode(0, 0)
        self.rtlsdr_source_0.set_iq_balance_mode(2, 0)
        self.rtlsdr_source_0.set_gain_mode(True, 0)
        self.rtlsdr_source_0.set_gain(50, 0)
        self.rtlsdr_source_0.set_if_gain(20, 0)
        self.rtlsdr_source_0.set_bb_gain(20, 0)
        self.rtlsdr_source_0.set_antenna("", 0)
        self.rtlsdr_source_0.set_bandwidth(0, 0)
          
        self.rational_resampler_xxx_0_0 = filter.rational_resampler_fff(
                interpolation=audio_rate*audio_interp,
                decimation=samp_rate/xlate_decim,
                taps=None,
                fractional_bw=None,
        )
        self.freq_xlating_fir_filter_xxx_0 = filter.freq_xlating_fir_filter_ccc(xlate_decim, (firdes.low_pass(1, samp_rate, xlate_bandwidth/2, 1000)), xlate_offset + xlate_offset_fine, samp_rate)
        self.blocks_multiply_const_vxx_0 = blocks.multiply_const_vff((volume, ))
        self.audio_sink_0 = audio.sink(48000, "", True)
        self.analog_pwr_squelch_xx_0 = analog.pwr_squelch_cc(squelch*-1, 0.1, 1, False)
        self.analog_nbfm_rx_0 = analog.nbfm_rx(
        	audio_rate=audio_rate,
        	quad_rate=audio_rate*audio_interp,
        	tau=75e-6,
        	max_dev=5e3,
        )

        ##################################################
        # Connections
        ##################################################
        self.connect((self.analog_nbfm_rx_0, 0), (self.rational_resampler_xxx_0_0, 0))    
        self.connect((self.analog_pwr_squelch_xx_0, 0), (self.analog_nbfm_rx_0, 0))    
        self.connect((self.blocks_multiply_const_vxx_0, 0), (self.audio_sink_0, 0))    
        self.connect((self.freq_xlating_fir_filter_xxx_0, 0), (self.analog_pwr_squelch_xx_0, 0))    
        self.connect((self.rational_resampler_xxx_0_0, 0), (self.blocks_multiply_const_vxx_0, 0))    
        self.connect((self.rtlsdr_source_0, 0), (self.freq_xlating_fir_filter_xxx_0, 0))    
Esempio n. 23
0
    def __init__(self):
        gr.top_block.__init__(self, "Tetra Rx Multi")

        options = self.get_options()

        ##################################################
        # Variables
        ##################################################
        self.srate_rx = srate_rx = options.sample_rate
        self.channels = srate_rx / 25000
        self.srate_channel = 36000
        self.afc_period = 5
        self.afc_gain = 1.
        self.afc_channel = options.auto_tune or -1
        self.afc_ppm_step = 100
        self.debug = options.debug
        self.last_pwr = -100000
        self.sig_det_period = 1
        self.sig_det_bw = sig_det_bw = options.sig_detection_bw or srate_rx
        if self.sig_det_bw <= 1.:
            self.sig_det_bw *= srate_rx
        self.sig_det_threshold = options.sig_detection_threshold
        self.sig_det_channels = []
        for ch in range(self.channels):
            if ch >= self.channels / 2:
                ch_ = (self.channels - ch - 1)
            else:
                ch_ = ch
            if (float(ch_) / self.channels * 2) <= (self.sig_det_bw / srate_rx):
                self.sig_det_channels.append(ch)

        ##################################################
        # RPC server
        ##################################################
        self.xmlrpc_server = SimpleXMLRPCServer.SimpleXMLRPCServer(
                ("localhost", options.listen_port), allow_none=True)
        self.xmlrpc_server.register_instance(self)
        threading.Thread(target=self.xmlrpc_server.serve_forever).start()

        ##################################################
        # Rx Blocks and connections
        ##################################################
        self.src = osmosdr.source( args=options.args )
        self.src.set_sample_rate(srate_rx)
        self.src.set_center_freq(options.frequency, 0)
        self.src.set_freq_corr(options.ppm, 0)
        self.src.set_dc_offset_mode(0, 0)
        self.src.set_iq_balance_mode(0, 0)
        if options.gain is not None:
            self.src.set_gain_mode(False, 0)
            self.src.set_gain(36, 0)
        else:
            self.src.set_gain_mode(True, 0)

        out_type, dst_path = options.output.split("://", 1)
        if out_type == "udp":
            dst_ip, dst_port = dst_path.split(':', 1)

        self.freq_xlating = freq_xlating_fft_filter_ccc(1, (1, ), 0, srate_rx)

        self.channelizer = pfb.channelizer_ccf(
              self.channels,
              (firdes.root_raised_cosine(1, srate_rx, 18000, 0.35, 1024)),
              36./25.,
              100)

        self.squelch = []
        self.digital_mpsk_receiver_cc = []
        self.diff_phasor = []
        self.complex_to_arg = []
        self.multiply_const = []
        self.add_const = []
        self.float_to_uchar = []
        self.map_bits = []
        self.unpack_k_bits = []
        self.blocks_sink = []
        for ch in range(0, self.channels):
            squelch = analog.pwr_squelch_cc(0, 0.001, 0, True)
            mpsk = digital.mpsk_receiver_cc(
                    4, math.pi/4, math.pi/100.0, -0.5, 0.5, 0.25, 0.001, 2, 0.001, 0.001)
            diff_phasor = digital.diff_phasor_cc()
            complex_to_arg = blocks.complex_to_arg(1)
            multiply_const = blocks.multiply_const_vff((2./math.pi, ))
            add_const = blocks.add_const_vff((1.5, ))
            float_to_uchar = blocks.float_to_uchar()
            map_bits = digital.map_bb(([3, 2, 0, 1, 3]))
            unpack_k_bits = blocks.unpack_k_bits_bb(2)

            if out_type == 'udp':
                sink = blocks.udp_sink(gr.sizeof_gr_char, dst_ip, int(dst_port)+ch, 1472, True)
            elif out_type == 'file':
                sink = blocks.file_sink(gr.sizeof_char, dst_path % ch, False)
                sink.set_unbuffered(True)
            else:
                raise ValueError("Invalid output URL '%s'" % options.output)

            self.connect((self.channelizer, ch),
                    (squelch, 0),
                    (mpsk, 0),
                    (diff_phasor, 0),
                    (complex_to_arg, 0),
                    (multiply_const, 0),
                    (add_const, 0),
                    (float_to_uchar, 0),
                    (map_bits, 0),
                    (unpack_k_bits, 0),
                    (sink, 0))

            self.squelch.append(squelch)
            self.digital_mpsk_receiver_cc.append(mpsk)
            self.diff_phasor.append(diff_phasor)
            self.complex_to_arg.append(complex_to_arg)
            self.multiply_const.append(multiply_const)
            self.add_const.append(add_const)
            self.float_to_uchar.append(float_to_uchar)
            self.map_bits.append(map_bits)
            self.unpack_k_bits.append(unpack_k_bits)
            self.blocks_sink.append(sink)

        self.connect(
                (self.src, 0),
                (self.freq_xlating, 0),
                (self.channelizer, 0))

        ##################################################
        # signal strenght identification
        ##################################################
        self.pwr_probes = []
        for ch in range(self.channels):
            pwr_probe = analog.probe_avg_mag_sqrd_c(0, 1./self.srate_channel)
            self.pwr_probes.append(pwr_probe)
            self.connect((self.channelizer, ch), (pwr_probe, 0))
        def _sig_det_probe():
            while True:
                pwr = [self.pwr_probes[ch].level()
                        for ch in range(self.channels)
                        if ch in self.sig_det_channels]
                pwr = [10 * math.log10(p) for p in pwr if p > 0.]
                if not pwr:
                    continue
                pwr = min(pwr) + self.sig_det_threshold
                print "Power level for squelch % 5.1f" % pwr
                if abs(pwr - self.last_pwr) > (self.sig_det_threshold / 2):
                    for s in self.squelch:
                        s.set_threshold(pwr)
                    self.last_pwr = pwr
                time.sleep(self.sig_det_period)

        if self.sig_det_threshold is not None:
            self._sig_det_probe_thread = threading.Thread(target=_sig_det_probe)
            self._sig_det_probe_thread.daemon = True
            self._sig_det_probe_thread.start()

        ##################################################
        # AFC blocks and connections
        ##################################################
        self.afc_selector = grc_blks2.selector(
                item_size=gr.sizeof_gr_complex,
                num_inputs=self.channels,
                num_outputs=1,
                input_index=0,
                output_index=0,
                )

        self.afc_demod = analog.quadrature_demod_cf(self.srate_channel/(2*math.pi))
        samp_afc = self.srate_channel*self.afc_period / 2
        self.afc_avg = blocks.moving_average_ff(samp_afc, 1./samp_afc*self.afc_gain)
        self.afc_probe = blocks.probe_signal_f()

        def _afc_probe():
            while True:
                time.sleep(self.afc_period)
                if self.afc_channel == -1:
                    continue
                err = self.afc_probe.level()
                if abs(err) < self.afc_ppm_step:
                    continue
                freq = self.freq_xlating.center_freq + err * self.afc_gain
                if self.debug:
                    print "err: %f\tfreq: %f" % (err, freq, )
                self.freq_xlating.set_center_freq(freq)
        self._afc_err_thread = threading.Thread(target=_afc_probe)
        self._afc_err_thread.daemon = True
        self._afc_err_thread.start()

        for ch in range(self.channels):
            self.connect((self.channelizer, ch), (self.afc_selector, ch))
        self.connect(
                (self.afc_selector, 0),
                (self.afc_demod, 0),
                (self.afc_avg, 0),
                (self.afc_probe, 0))

        if self.afc_channel != -1:
            self.afc_selector.set_input_index(self.afc_channel)
Esempio n. 24
0
    def __init__(self):
        grc_wxgui.top_block_gui.__init__(self, title="Top Block")
        _icon_path = "/usr/share/icons/hicolor/32x32/apps/gnuradio-grc.png"
        self.SetIcon(wx.Icon(_icon_path, wx.BITMAP_TYPE_ANY))

        ##################################################
        # Variables
        ##################################################
        self.symbol_rate = symbol_rate = 60000
        self.symbol_period = symbol_period = pow(symbol_rate,-1)
        self.samp_rate = samp_rate = 300e3
        self.samp_per_sym = samp_per_sym = 5
        self.packet_len = packet_len = 256
        self.decimation = decimation = 1
        self.bits_per_sym = bits_per_sym = 1
        self.Sq_Thresh = Sq_Thresh = -30
        self.RF_Gain = RF_Gain = 20
        self.Fc = Fc = 175e6

        ##################################################
        # Blocks
        ##################################################
        _Sq_Thresh_sizer = wx.BoxSizer(wx.VERTICAL)
        self._Sq_Thresh_text_box = forms.text_box(
        	parent=self.GetWin(),
        	sizer=_Sq_Thresh_sizer,
        	value=self.Sq_Thresh,
        	callback=self.set_Sq_Thresh,
        	label="Squelch Threshold",
        	converter=forms.float_converter(),
        	proportion=0,
        )
        self._Sq_Thresh_slider = forms.slider(
        	parent=self.GetWin(),
        	sizer=_Sq_Thresh_sizer,
        	value=self.Sq_Thresh,
        	callback=self.set_Sq_Thresh,
        	minimum=-50,
        	maximum=20,
        	num_steps=1000,
        	style=wx.SL_HORIZONTAL,
        	cast=float,
        	proportion=1,
        )
        self.GridAdd(_Sq_Thresh_sizer, 0, 2, 1, 1)
        _RF_Gain_sizer = wx.BoxSizer(wx.VERTICAL)
        self._RF_Gain_text_box = forms.text_box(
        	parent=self.GetWin(),
        	sizer=_RF_Gain_sizer,
        	value=self.RF_Gain,
        	callback=self.set_RF_Gain,
        	label="RF Gain",
        	converter=forms.float_converter(),
        	proportion=0,
        )
        self._RF_Gain_slider = forms.slider(
        	parent=self.GetWin(),
        	sizer=_RF_Gain_sizer,
        	value=self.RF_Gain,
        	callback=self.set_RF_Gain,
        	minimum=0,
        	maximum=50,
        	num_steps=1000,
        	style=wx.SL_HORIZONTAL,
        	cast=float,
        	proportion=1,
        )
        self.GridAdd(_RF_Gain_sizer, 0, 0, 1, 1)
        _Fc_sizer = wx.BoxSizer(wx.VERTICAL)
        self._Fc_text_box = forms.text_box(
        	parent=self.GetWin(),
        	sizer=_Fc_sizer,
        	value=self.Fc,
        	callback=self.set_Fc,
        	label="Center Frequency",
        	converter=forms.float_converter(),
        	proportion=0,
        )
        self._Fc_slider = forms.slider(
        	parent=self.GetWin(),
        	sizer=_Fc_sizer,
        	value=self.Fc,
        	callback=self.set_Fc,
        	minimum=50e6,
        	maximum=1700e6,
        	num_steps=1000,
        	style=wx.SL_HORIZONTAL,
        	cast=float,
        	proportion=1,
        )
        self.GridAdd(_Fc_sizer, 0, 1, 1, 1)
        self.osmosdr_source_0_0 = osmosdr.source( args="numchan=" + str(1) + " " + 'rtl_tcp=10.0.0.13:1234' )
        self.osmosdr_source_0_0.set_sample_rate(samp_rate)
        self.osmosdr_source_0_0.set_center_freq(Fc+10e6, 0)
        self.osmosdr_source_0_0.set_freq_corr(0, 0)
        self.osmosdr_source_0_0.set_dc_offset_mode(0, 0)
        self.osmosdr_source_0_0.set_iq_balance_mode(0, 0)
        self.osmosdr_source_0_0.set_gain_mode(False, 0)
        self.osmosdr_source_0_0.set_gain(RF_Gain, 0)
        self.osmosdr_source_0_0.set_if_gain(0, 0)
        self.osmosdr_source_0_0.set_bb_gain(0, 0)
        self.osmosdr_source_0_0.set_antenna("", 0)
        self.osmosdr_source_0_0.set_bandwidth(0, 0)
          
        self.osmosdr_source_0 = osmosdr.source( args="numchan=" + str(1) + " " + 'rtl_tcp=10.0.0.12:1234' )
        self.osmosdr_source_0.set_sample_rate(samp_rate)
        self.osmosdr_source_0.set_center_freq(Fc, 0)
        self.osmosdr_source_0.set_freq_corr(0, 0)
        self.osmosdr_source_0.set_dc_offset_mode(0, 0)
        self.osmosdr_source_0.set_iq_balance_mode(0, 0)
        self.osmosdr_source_0.set_gain_mode(False, 0)
        self.osmosdr_source_0.set_gain(0, 0)
        self.osmosdr_source_0.set_if_gain(0, 0)
        self.osmosdr_source_0.set_bb_gain(0, 0)
        self.osmosdr_source_0.set_antenna("", 0)
        self.osmosdr_source_0.set_bandwidth(0, 0)
          
        self.blocks_skiphead_0_0 = blocks.skiphead(gr.sizeof_gr_complex*1, int(samp_rate)*5)
        self.blocks_skiphead_0 = blocks.skiphead(gr.sizeof_gr_complex*1, int(samp_rate)*5)
        self.blocks_pack_k_bits_bb_0_0 = blocks.pack_k_bits_bb(8)
        self.blocks_pack_k_bits_bb_0 = blocks.pack_k_bits_bb(8)
        self.blocks_null_sink_0_0 = blocks.null_sink(gr.sizeof_float*1)
        self.blocks_null_sink_0 = blocks.null_sink(gr.sizeof_float*1)
        self.blocks_float_to_char_0_0 = blocks.float_to_char(1, 1)
        self.blocks_float_to_char_0 = blocks.float_to_char(1, 1)
        self.blks2_tcp_sink_0_0_0 = grc_blks2.tcp_sink(
        	itemsize=gr.sizeof_char*1,
        	addr="127.0.0.1",
        	port=3493,
        	server=True,
        )
        self.blks2_tcp_sink_0_0 = grc_blks2.tcp_sink(
        	itemsize=gr.sizeof_char*1,
        	addr="127.0.0.1",
        	port=3491,
        	server=True,
        )
        self.analog_pwr_squelch_xx_0_0 = analog.pwr_squelch_cc(Sq_Thresh, 0.01, 5, True)
        self.analog_pwr_squelch_xx_0 = analog.pwr_squelch_cc(-10, 0.01, 5, True)
        self.analog_fm_demod_cf_0_0 = analog.fm_demod_cf(
        	channel_rate=samp_rate,
        	audio_decim=decimation,
        	deviation=75e3,
        	audio_pass=120e3,
        	audio_stop=140e3,
        	gain=1.0,
        	tau=75e-6,
        )
        self.analog_fm_demod_cf_0 = analog.fm_demod_cf(
        	channel_rate=samp_rate,
        	audio_decim=decimation,
        	deviation=75e3,
        	audio_pass=120e3,
        	audio_stop=140e3,
        	gain=1.0,
        	tau=75e-6,
        )
        self.RPi_Rx_RPi_Rx_0_0 = RPi_Rx.RPi_Rx(bits_per_sym, samp_per_sym, packet_len, 65)
        self.RPi_Rx_RPi_Rx_0 = RPi_Rx.RPi_Rx(bits_per_sym, samp_per_sym, packet_len, 65)

        ##################################################
        # Connections
        ##################################################
        self.connect((self.analog_fm_demod_cf_0, 0), (self.RPi_Rx_RPi_Rx_0, 0))
        self.connect((self.RPi_Rx_RPi_Rx_0, 0), (self.blocks_null_sink_0, 0))
        self.connect((self.RPi_Rx_RPi_Rx_0, 0), (self.blocks_float_to_char_0, 0))
        self.connect((self.analog_pwr_squelch_xx_0, 0), (self.analog_fm_demod_cf_0, 0))
        self.connect((self.blocks_skiphead_0, 0), (self.analog_pwr_squelch_xx_0, 0))
        self.connect((self.osmosdr_source_0, 0), (self.blocks_skiphead_0, 0))
        self.connect((self.blocks_float_to_char_0, 0), (self.blocks_pack_k_bits_bb_0, 0))
        self.connect((self.blocks_pack_k_bits_bb_0, 0), (self.blks2_tcp_sink_0_0, 0))
        self.connect((self.blocks_float_to_char_0_0, 0), (self.blocks_pack_k_bits_bb_0_0, 0))
        self.connect((self.blocks_pack_k_bits_bb_0_0, 0), (self.blks2_tcp_sink_0_0_0, 0))
        self.connect((self.analog_fm_demod_cf_0_0, 0), (self.RPi_Rx_RPi_Rx_0_0, 0))
        self.connect((self.RPi_Rx_RPi_Rx_0_0, 0), (self.blocks_null_sink_0_0, 0))
        self.connect((self.RPi_Rx_RPi_Rx_0_0, 0), (self.blocks_float_to_char_0_0, 0))
        self.connect((self.analog_pwr_squelch_xx_0_0, 0), (self.analog_fm_demod_cf_0_0, 0))
        self.connect((self.blocks_skiphead_0_0, 0), (self.analog_pwr_squelch_xx_0_0, 0))
        self.connect((self.osmosdr_source_0_0, 0), (self.blocks_skiphead_0_0, 0))
Esempio n. 25
0
	def __init__(self,infile, outfile, input_rate, channel_rate, codec_provoice, codec_p25, sslevel, svlevel):
		gr.top_block.__init__(self, "Top Block")
		
		self.input_rate = input_rate
		self.channel_rate = channel_rate
		
		self.source = blocks.file_source(gr.sizeof_gr_complex*1, infile, False)
		self.lp1_decim = int(input_rate/(channel_rate*1.6))
		print self.lp1_decim
		self.lp1 = filter.fir_filter_ccc(self.lp1_decim,firdes.low_pass( 1.0, self.input_rate, (self.channel_rate/2), ((self.channel_rate/2)*0.6), firdes.WIN_HAMMING))

		#self.audiodemod =  gr.quadrature_demod_cf(1)

		audio_pass = (input_rate/self.lp1_decim)*0.25
		audio_stop = audio_pass+2000
		self.audiodemod = analog.fm_demod_cf(channel_rate=(input_rate/self.lp1_decim), audio_decim=1, deviation=15000, audio_pass=audio_pass, audio_stop=audio_stop, gain=8, tau=75e-6)
		
		self.throttle = blocks.throttle(gr.sizeof_gr_complex*1, self.input_rate)

		self.signal_squelch = analog.pwr_squelch_cc(sslevel,0.01, 0, True)
		self.vox_squelch = analog.pwr_squelch_ff(svlevel, 0.0005, 0, True)
		
		self.audiosink = blocks.wavfile_sink(outfile, 1, 8000)

		if codec_provoice:
			self.dsd = dsd.block_ff(dsd.dsd_FRAME_PROVOICE,dsd.dsd_MOD_AUTO_SELECT,1,0,False)
			channel_rate = input_rate/self.lp1_decim
			self.resampler_in = filter.rational_resampler_fff(interpolation=48000, decimation=channel_rate, taps=None, fractional_bw=None, )
			output_rate = 8000
			resampler = filter.rational_resampler_fff(
                                        interpolation=(input_rate/self.lp1_decim),
                                        decimation=output_rate,
                                        taps=None,
                                        fractional_bw=None,
                                )
		elif codec_p25:
			symbol_deviation = 600.0
			symbol_rate = 4800
			channel_rate = input_rate/self.lp1_decim
			
		        fm_demod_gain = channel_rate / (2.0 * pi * symbol_deviation)
		        fm_demod = analog.quadrature_demod_cf(fm_demod_gain)

		        symbol_decim = 1
		        samples_per_symbol = channel_rate // symbol_rate
		        symbol_coeffs = (1.0/samples_per_symbol,) * samples_per_symbol
		        symbol_filter = filter.fir_filter_fff(symbol_decim, symbol_coeffs)

		        autotuneq = gr.msg_queue(2)
		        demod_fsk4 = op25.fsk4_demod_ff(autotuneq, channel_rate, symbol_rate)


		        # symbol slicer
		        levels = [ -2.0, 0.0, 2.0, 4.0 ]
		        slicer = op25.fsk4_slicer_fb(levels)

			imbe = repeater.vocoder(False, True, 0, "", 0, False)
			self.decodequeue = decodequeue = gr.msg_queue(10000)
			decoder = repeater.p25_frame_assembler('', 0, 0, True, True, False, decodequeue)
	
		        float_conversion = blocks.short_to_float(1, 8192)
		        resampler = filter.rational_resampler_fff(
		                        interpolation=8000,
		                        decimation=8000,
		                        taps=None,
		                        fractional_bw=None,
		                )
	
					
		#Tone squelch, custom GRC block that rips off CTCSS squelch to detect 4800 hz tone and latch squelch after that
		if not codec_provoice and not codec_p25:
			#self.tone_squelch = gr.tone_squelch_ff(audiorate, 4800.0, 0.05, 300, 0, True)
			#tone squelch is EDACS ONLY
			self.high_pass = filter.fir_filter_fff(1, firdes.high_pass(1, (input_rate/self.lp1_decim), 300, 30, firdes.WIN_HAMMING, 6.76))
			#output_rate = channel_rate
			resampler = filter.rational_resampler_fff(
                                        interpolation=8000,
                                        decimation=(input_rate/self.lp1_decim),
                                        taps=None,
                                        fractional_bw=None,
			)
		if(codec_provoice):
			self.connect(self.source, self.throttle, self.lp1, self.audiodemod, self.resampler_in, self.dsd, self.audiosink)
		elif(codec_p25):
			self.connect(self.source, self.throttle, self.lp1, fm_demod, symbol_filter, demod_fsk4, slicer, decoder, imbe, float_conversion, resampler, self.audiosink)
		else:
			self.connect(self.source, self.throttle, self.lp1, self.signal_squelch, self.audiodemod, self.high_pass, self.vox_squelch, resampler, self.audiosink)

		self.time_open = time.time()
		self.time_tone = 0
		self.time_activity = 0
Esempio n. 26
0
    def __init__(self):
        gr.top_block.__init__(self, "Multimon Flex Rtl Tcp")
        Qt.QWidget.__init__(self)
        self.setWindowTitle("Multimon Flex Rtl Tcp")
        qtgui.util.check_set_qss()
        try:
            self.setWindowIcon(Qt.QIcon.fromTheme('gnuradio-grc'))
        except:
            pass
        self.top_scroll_layout = Qt.QVBoxLayout()
        self.setLayout(self.top_scroll_layout)
        self.top_scroll = Qt.QScrollArea()
        self.top_scroll.setFrameStyle(Qt.QFrame.NoFrame)
        self.top_scroll_layout.addWidget(self.top_scroll)
        self.top_scroll.setWidgetResizable(True)
        self.top_widget = Qt.QWidget()
        self.top_scroll.setWidget(self.top_widget)
        self.top_layout = Qt.QVBoxLayout(self.top_widget)
        self.top_grid_layout = Qt.QGridLayout()
        self.top_layout.addLayout(self.top_grid_layout)

        self.settings = Qt.QSettings("GNU Radio", "multimon_flex_rtl_tcp")
        self.restoreGeometry(self.settings.value("geometry").toByteArray())

        ##################################################
        # Variables
        ##################################################
        self.samp_rate = samp_rate = 2.4e6
        self.channel_9 = channel_9 = 931.45e6
        self.channel_8 = channel_8 = 931.4e6
        self.channel_7 = channel_7 = 931.85e6
        self.channel_6 = channel_6 = 931.5e6
        self.channel_5 = channel_5 = 929.7e6
        self.channel_4 = channel_4 = 929.650e6
        self.channel_3 = channel_3 = 929.6e6
        self.channel_2 = channel_2 = 929.5e6
        self.channel_12 = channel_12 = 929.85e6
        self.channel_11 = channel_11 = 929.8e6
        self.channel_10 = channel_10 = 929.65e6
        self.channel_1 = channel_1 = 929.65e6
        self.channel_0 = channel_0 = 929.6e6
        self.xlate_filter_taps = xlate_filter_taps = firdes.low_pass(1, samp_rate, 125000, 25000, firdes.WIN_HAMMING, 6.76)
        self.variable_qtgui_range_0 = variable_qtgui_range_0 = 50
        self.sqlch = sqlch = -50
        self.if_gain = if_gain = 40
        self.gain = gain = 50
        self.firdes_tap = firdes_tap = firdes.low_pass(1, samp_rate, 125000, 25000, firdes.WIN_HAMMING, 6.76)
        self.corr = corr = -13.5
        self.channel_13 = channel_13 = 929.625e6
        self.center_freq_1 = center_freq_1 = sum([channel_6, channel_7] ) / float(len([channel_6, channel_7]))
        self.center_freq_0 = center_freq_0 = sum([channel_0, channel_1] ) / float(len([channel_0, channel_1]))
        self.center_freq = center_freq = sum([channel_0, channel_1, channel_2, channel_3, channel_4, channel_5, channel_6, channel_7, channel_8, channel_9, channel_10, channel_11, channel_12] ) / float(len([channel_0, channel_1, channel_2, channel_3, channel_4, channel_5, channel_6, channel_7, channel_8, channel_9, channel_10, channel_11, channel_12]))
        self.bb_gain = bb_gain = 40

        ##################################################
        # Blocks
        ##################################################
        self._sqlch_range = Range(-150, -20, 500, -50, 200)
        self._sqlch_win = RangeWidget(self._sqlch_range, self.set_sqlch, "sqlch", "counter_slider", float)
        self.top_layout.addWidget(self._sqlch_win)
        self._if_gain_range = Range(0, 60, 100, 40, 200)
        self._if_gain_win = RangeWidget(self._if_gain_range, self.set_if_gain, "if_gain", "counter", float)
        self.top_layout.addWidget(self._if_gain_win)
        self._gain_range = Range(0, 100, 100, 50, 200)
        self._gain_win = RangeWidget(self._gain_range, self.set_gain, "gain", "counter", float)
        self.top_layout.addWidget(self._gain_win)
        self._corr_range = Range(-100, 100, 100, -13.5, 200)
        self._corr_win = RangeWidget(self._corr_range, self.set_corr, "corr", "counter", float)
        self.top_layout.addWidget(self._corr_win)
        self._channel_7_tool_bar = Qt.QToolBar(self)
        self._channel_7_tool_bar.addWidget(Qt.QLabel("channel_7"+": "))
        self._channel_7_line_edit = Qt.QLineEdit(str(self.channel_7))
        self._channel_7_tool_bar.addWidget(self._channel_7_line_edit)
        self._channel_7_line_edit.returnPressed.connect(
        	lambda: self.set_channel_7(eng_notation.str_to_num(str(self._channel_7_line_edit.text().toAscii()))))
        self.top_layout.addWidget(self._channel_7_tool_bar)
        self._channel_6_tool_bar = Qt.QToolBar(self)
        self._channel_6_tool_bar.addWidget(Qt.QLabel("channel_6"+": "))
        self._channel_6_line_edit = Qt.QLineEdit(str(self.channel_6))
        self._channel_6_tool_bar.addWidget(self._channel_6_line_edit)
        self._channel_6_line_edit.returnPressed.connect(
        	lambda: self.set_channel_6(eng_notation.str_to_num(str(self._channel_6_line_edit.text().toAscii()))))
        self.top_layout.addWidget(self._channel_6_tool_bar)
        self._channel_1_tool_bar = Qt.QToolBar(self)
        self._channel_1_tool_bar.addWidget(Qt.QLabel("channel_1"+": "))
        self._channel_1_line_edit = Qt.QLineEdit(str(self.channel_1))
        self._channel_1_tool_bar.addWidget(self._channel_1_line_edit)
        self._channel_1_line_edit.returnPressed.connect(
        	lambda: self.set_channel_1(eng_notation.str_to_num(str(self._channel_1_line_edit.text().toAscii()))))
        self.top_layout.addWidget(self._channel_1_tool_bar)
        self._channel_0_tool_bar = Qt.QToolBar(self)
        self._channel_0_tool_bar.addWidget(Qt.QLabel("channel_0"+": "))
        self._channel_0_line_edit = Qt.QLineEdit(str(self.channel_0))
        self._channel_0_tool_bar.addWidget(self._channel_0_line_edit)
        self._channel_0_line_edit.returnPressed.connect(
        	lambda: self.set_channel_0(eng_notation.str_to_num(str(self._channel_0_line_edit.text().toAscii()))))
        self.top_layout.addWidget(self._channel_0_tool_bar)
        self._bb_gain_range = Range(0, 100, 100, 40, 200)
        self._bb_gain_win = RangeWidget(self._bb_gain_range, self.set_bb_gain, "bb_gain", "counter", float)
        self.top_layout.addWidget(self._bb_gain_win)
        self._variable_qtgui_range_0_range = Range(0, 100, 1, 50, 200)
        self._variable_qtgui_range_0_win = RangeWidget(self._variable_qtgui_range_0_range, self.set_variable_qtgui_range_0, "variable_qtgui_range_0", "counter_slider", float)
        self.top_layout.addWidget(self._variable_qtgui_range_0_win)
        self.osmosdr_source_0_0 = osmosdr.source( args="numchan=" + str(1) + " " + 'rtl=1' )
        self.osmosdr_source_0_0.set_sample_rate(samp_rate)
        self.osmosdr_source_0_0.set_center_freq(center_freq_1 - 100000, 0)
        self.osmosdr_source_0_0.set_freq_corr(corr, 0)
        self.osmosdr_source_0_0.set_dc_offset_mode(0, 0)
        self.osmosdr_source_0_0.set_iq_balance_mode(2, 0)
        self.osmosdr_source_0_0.set_gain_mode(True, 0)
        self.osmosdr_source_0_0.set_gain(gain, 0)
        self.osmosdr_source_0_0.set_if_gain(if_gain, 0)
        self.osmosdr_source_0_0.set_bb_gain(bb_gain, 0)
        self.osmosdr_source_0_0.set_antenna('', 0)
        self.osmosdr_source_0_0.set_bandwidth(0, 0)

        self.osmosdr_source_0 = osmosdr.source( args="numchan=" + str(1) + " " + 'rtl=0' )
        self.osmosdr_source_0.set_sample_rate(samp_rate)
        self.osmosdr_source_0.set_center_freq(center_freq_0 - 100000, 0)
        self.osmosdr_source_0.set_freq_corr(corr, 0)
        self.osmosdr_source_0.set_dc_offset_mode(0, 0)
        self.osmosdr_source_0.set_iq_balance_mode(2, 0)
        self.osmosdr_source_0.set_gain_mode(True, 0)
        self.osmosdr_source_0.set_gain(gain, 0)
        self.osmosdr_source_0.set_if_gain(if_gain, 0)
        self.osmosdr_source_0.set_bb_gain(bb_gain, 0)
        self.osmosdr_source_0.set_antenna('', 0)
        self.osmosdr_source_0.set_bandwidth(0, 0)

        self.low_pass_filter_0_0_0_0_1 = filter.fir_filter_ccf(1, firdes.low_pass(
        	1, 48e3, 7.5e3, 5e3, firdes.WIN_HAMMING, 6.76))
        self.low_pass_filter_0_0_0_0_0_0 = filter.fir_filter_ccf(1, firdes.low_pass(
        	1, 48e3, 7.5e3, 5e3, firdes.WIN_HAMMING, 6.76))
        self.low_pass_filter_0_0 = filter.fir_filter_ccf(1, firdes.low_pass(
        	1, 48e3, 7.5e3, 5e3, firdes.WIN_HAMMING, 6.76))
        self.low_pass_filter_0 = filter.fir_filter_ccf(1, firdes.low_pass(
        	1, 48e3, 7.5e3, 5e3, firdes.WIN_HAMMING, 6.76))
        self.freq_xlating_fir_filter_xxx_0_0_0_0_1 = filter.freq_xlating_fir_filter_ccc(int(samp_rate / 48000), (firdes_tap), channel_6 - center_freq_1, samp_rate)
        self.freq_xlating_fir_filter_xxx_0_0_0_0_0_0 = filter.freq_xlating_fir_filter_ccc(int(samp_rate / 48000), (firdes_tap), channel_7 - center_freq_1, samp_rate)
        self.freq_xlating_fir_filter_xxx_0_0 = filter.freq_xlating_fir_filter_ccc(int(samp_rate / 48000), (firdes_tap), channel_1 - center_freq_0, samp_rate)
        self.freq_xlating_fir_filter_xxx_0 = filter.freq_xlating_fir_filter_ccc(int(samp_rate / 48000), (firdes_tap), channel_0 - center_freq_0, samp_rate)
        self._channel_9_tool_bar = Qt.QToolBar(self)
        self._channel_9_tool_bar.addWidget(Qt.QLabel("channel_9"+": "))
        self._channel_9_line_edit = Qt.QLineEdit(str(self.channel_9))
        self._channel_9_tool_bar.addWidget(self._channel_9_line_edit)
        self._channel_9_line_edit.returnPressed.connect(
        	lambda: self.set_channel_9(eng_notation.str_to_num(str(self._channel_9_line_edit.text().toAscii()))))
        self.top_layout.addWidget(self._channel_9_tool_bar)
        self._channel_8_tool_bar = Qt.QToolBar(self)
        self._channel_8_tool_bar.addWidget(Qt.QLabel("channel_8"+": "))
        self._channel_8_line_edit = Qt.QLineEdit(str(self.channel_8))
        self._channel_8_tool_bar.addWidget(self._channel_8_line_edit)
        self._channel_8_line_edit.returnPressed.connect(
        	lambda: self.set_channel_8(eng_notation.str_to_num(str(self._channel_8_line_edit.text().toAscii()))))
        self.top_layout.addWidget(self._channel_8_tool_bar)
        self._channel_5_tool_bar = Qt.QToolBar(self)
        self._channel_5_tool_bar.addWidget(Qt.QLabel("channel_5"+": "))
        self._channel_5_line_edit = Qt.QLineEdit(str(self.channel_5))
        self._channel_5_tool_bar.addWidget(self._channel_5_line_edit)
        self._channel_5_line_edit.returnPressed.connect(
        	lambda: self.set_channel_5(eng_notation.str_to_num(str(self._channel_5_line_edit.text().toAscii()))))
        self.top_layout.addWidget(self._channel_5_tool_bar)
        self._channel_4_tool_bar = Qt.QToolBar(self)
        self._channel_4_tool_bar.addWidget(Qt.QLabel("channel_4"+": "))
        self._channel_4_line_edit = Qt.QLineEdit(str(self.channel_4))
        self._channel_4_tool_bar.addWidget(self._channel_4_line_edit)
        self._channel_4_line_edit.returnPressed.connect(
        	lambda: self.set_channel_4(eng_notation.str_to_num(str(self._channel_4_line_edit.text().toAscii()))))
        self.top_layout.addWidget(self._channel_4_tool_bar)
        self._channel_3_tool_bar = Qt.QToolBar(self)
        self._channel_3_tool_bar.addWidget(Qt.QLabel("channel_3"+": "))
        self._channel_3_line_edit = Qt.QLineEdit(str(self.channel_3))
        self._channel_3_tool_bar.addWidget(self._channel_3_line_edit)
        self._channel_3_line_edit.returnPressed.connect(
        	lambda: self.set_channel_3(eng_notation.str_to_num(str(self._channel_3_line_edit.text().toAscii()))))
        self.top_layout.addWidget(self._channel_3_tool_bar)
        self._channel_2_tool_bar = Qt.QToolBar(self)
        self._channel_2_tool_bar.addWidget(Qt.QLabel("channel_2"+": "))
        self._channel_2_line_edit = Qt.QLineEdit(str(self.channel_2))
        self._channel_2_tool_bar.addWidget(self._channel_2_line_edit)
        self._channel_2_line_edit.returnPressed.connect(
        	lambda: self.set_channel_2(eng_notation.str_to_num(str(self._channel_2_line_edit.text().toAscii()))))
        self.top_layout.addWidget(self._channel_2_tool_bar)
        self._channel_13_tool_bar = Qt.QToolBar(self)
        self._channel_13_tool_bar.addWidget(Qt.QLabel("channel_13"+": "))
        self._channel_13_line_edit = Qt.QLineEdit(str(self.channel_13))
        self._channel_13_tool_bar.addWidget(self._channel_13_line_edit)
        self._channel_13_line_edit.returnPressed.connect(
        	lambda: self.set_channel_13(eng_notation.str_to_num(str(self._channel_13_line_edit.text().toAscii()))))
        self.top_layout.addWidget(self._channel_13_tool_bar)
        self._channel_12_tool_bar = Qt.QToolBar(self)
        self._channel_12_tool_bar.addWidget(Qt.QLabel("channel_12"+": "))
        self._channel_12_line_edit = Qt.QLineEdit(str(self.channel_12))
        self._channel_12_tool_bar.addWidget(self._channel_12_line_edit)
        self._channel_12_line_edit.returnPressed.connect(
        	lambda: self.set_channel_12(eng_notation.str_to_num(str(self._channel_12_line_edit.text().toAscii()))))
        self.top_layout.addWidget(self._channel_12_tool_bar)
        self._channel_11_tool_bar = Qt.QToolBar(self)
        self._channel_11_tool_bar.addWidget(Qt.QLabel("channel_11"+": "))
        self._channel_11_line_edit = Qt.QLineEdit(str(self.channel_11))
        self._channel_11_tool_bar.addWidget(self._channel_11_line_edit)
        self._channel_11_line_edit.returnPressed.connect(
        	lambda: self.set_channel_11(eng_notation.str_to_num(str(self._channel_11_line_edit.text().toAscii()))))
        self.top_layout.addWidget(self._channel_11_tool_bar)
        self._channel_10_tool_bar = Qt.QToolBar(self)
        self._channel_10_tool_bar.addWidget(Qt.QLabel("channel_10"+": "))
        self._channel_10_line_edit = Qt.QLineEdit(str(self.channel_10))
        self._channel_10_tool_bar.addWidget(self._channel_10_line_edit)
        self._channel_10_line_edit.returnPressed.connect(
        	lambda: self.set_channel_10(eng_notation.str_to_num(str(self._channel_10_line_edit.text().toAscii()))))
        self.top_layout.addWidget(self._channel_10_tool_bar)
        self.blocks_udp_sink_3_0_1 = blocks.udp_sink(gr.sizeof_short*1, '127.0.0.1', 7306, 1472, True)
        self.blocks_udp_sink_3_0_0_0 = blocks.udp_sink(gr.sizeof_short*1, '127.0.0.1', 7307, 1472, True)
        self.blocks_udp_sink_1 = blocks.udp_sink(gr.sizeof_short*1, '127.0.0.1', 7301, 1472, True)
        self.blocks_udp_sink_0 = blocks.udp_sink(gr.sizeof_short*1, '127.0.0.1', 7300, 1472, True)
        self.blocks_multiply_xx_0_1 = blocks.multiply_vcc(1)
        self.blocks_multiply_xx_0 = blocks.multiply_vcc(1)
        self.blocks_multiply_const_vxx_0_2 = blocks.multiply_const_vff((0.1, ))
        self.blocks_multiply_const_vxx_0_0_1 = blocks.multiply_const_vff((0.1, ))
        self.blocks_multiply_const_vxx_0_0_0_0_0_1 = blocks.multiply_const_vff((0.1, ))
        self.blocks_multiply_const_vxx_0_0_0_0_0_0_0 = blocks.multiply_const_vff((0.1, ))
        self.blocks_float_to_short_0_1_0_0_1 = blocks.float_to_short(1, 32767)
        self.blocks_float_to_short_0_1_0_0_0_0 = blocks.float_to_short(1, 32767)
        self.blocks_float_to_short_0_1 = blocks.float_to_short(1, 32767)
        self.blocks_float_to_short_0_0 = blocks.float_to_short(1, 32767)
        self.analog_sig_source_x_0 = analog.sig_source_c(samp_rate, analog.GR_COS_WAVE, -100000, 1, 0)
        self.analog_pwr_squelch_xx_0_2 = analog.pwr_squelch_cc(sqlch, 1, 1, True)
        self.analog_pwr_squelch_xx_0_0_1 = analog.pwr_squelch_cc(sqlch, 1, 1, True)
        self.analog_pwr_squelch_xx_0_0_0_0_0_1 = analog.pwr_squelch_cc(sqlch, 1, 1, True)
        self.analog_pwr_squelch_xx_0_0_0_0_0_0_0 = analog.pwr_squelch_cc(sqlch, 1, 1, True)
        self.analog_nbfm_rx_0_0_0_0_1 = analog.nbfm_rx(
        	audio_rate=48000,
        	quad_rate=48000,
        	tau=75e-6,
        	max_dev=5000,
          )
        self.analog_nbfm_rx_0_0_0_0_0_0 = analog.nbfm_rx(
        	audio_rate=48000,
        	quad_rate=48000,
        	tau=75e-6,
        	max_dev=5000,
          )
        self.analog_nbfm_rx_0_0 = analog.nbfm_rx(
        	audio_rate=48000,
        	quad_rate=48000,
        	tau=75e-6,
        	max_dev=5000,
          )
        self.analog_nbfm_rx_0 = analog.nbfm_rx(
        	audio_rate=48000,
        	quad_rate=48000,
        	tau=75e-6,
        	max_dev=5000,
          )

        ##################################################
        # Connections
        ##################################################
        self.connect((self.analog_nbfm_rx_0, 0), (self.blocks_multiply_const_vxx_0_2, 0))
        self.connect((self.analog_nbfm_rx_0_0, 0), (self.blocks_multiply_const_vxx_0_0_1, 0))
        self.connect((self.analog_nbfm_rx_0_0_0_0_0_0, 0), (self.blocks_multiply_const_vxx_0_0_0_0_0_0_0, 0))
        self.connect((self.analog_nbfm_rx_0_0_0_0_1, 0), (self.blocks_multiply_const_vxx_0_0_0_0_0_1, 0))
        self.connect((self.analog_pwr_squelch_xx_0_0_0_0_0_0_0, 0), (self.low_pass_filter_0_0_0_0_0_0, 0))
        self.connect((self.analog_pwr_squelch_xx_0_0_0_0_0_1, 0), (self.low_pass_filter_0_0_0_0_1, 0))
        self.connect((self.analog_pwr_squelch_xx_0_0_1, 0), (self.low_pass_filter_0_0, 0))
        self.connect((self.analog_pwr_squelch_xx_0_2, 0), (self.low_pass_filter_0, 0))
        self.connect((self.analog_sig_source_x_0, 0), (self.blocks_multiply_xx_0, 1))
        self.connect((self.analog_sig_source_x_0, 0), (self.blocks_multiply_xx_0_1, 1))
        self.connect((self.blocks_float_to_short_0_0, 0), (self.blocks_udp_sink_0, 0))
        self.connect((self.blocks_float_to_short_0_1, 0), (self.blocks_udp_sink_1, 0))
        self.connect((self.blocks_float_to_short_0_1_0_0_0_0, 0), (self.blocks_udp_sink_3_0_0_0, 0))
        self.connect((self.blocks_float_to_short_0_1_0_0_1, 0), (self.blocks_udp_sink_3_0_1, 0))
        self.connect((self.blocks_multiply_const_vxx_0_0_0_0_0_0_0, 0), (self.blocks_float_to_short_0_1_0_0_0_0, 0))
        self.connect((self.blocks_multiply_const_vxx_0_0_0_0_0_1, 0), (self.blocks_float_to_short_0_1_0_0_1, 0))
        self.connect((self.blocks_multiply_const_vxx_0_0_1, 0), (self.blocks_float_to_short_0_1, 0))
        self.connect((self.blocks_multiply_const_vxx_0_2, 0), (self.blocks_float_to_short_0_0, 0))
        self.connect((self.blocks_multiply_xx_0, 0), (self.freq_xlating_fir_filter_xxx_0, 0))
        self.connect((self.blocks_multiply_xx_0, 0), (self.freq_xlating_fir_filter_xxx_0_0, 0))
        self.connect((self.blocks_multiply_xx_0_1, 0), (self.freq_xlating_fir_filter_xxx_0_0_0_0_0_0, 0))
        self.connect((self.blocks_multiply_xx_0_1, 0), (self.freq_xlating_fir_filter_xxx_0_0_0_0_1, 0))
        self.connect((self.freq_xlating_fir_filter_xxx_0, 0), (self.analog_pwr_squelch_xx_0_2, 0))
        self.connect((self.freq_xlating_fir_filter_xxx_0_0, 0), (self.analog_pwr_squelch_xx_0_0_1, 0))
        self.connect((self.freq_xlating_fir_filter_xxx_0_0_0_0_0_0, 0), (self.analog_pwr_squelch_xx_0_0_0_0_0_0_0, 0))
        self.connect((self.freq_xlating_fir_filter_xxx_0_0_0_0_1, 0), (self.analog_pwr_squelch_xx_0_0_0_0_0_1, 0))
        self.connect((self.low_pass_filter_0, 0), (self.analog_nbfm_rx_0, 0))
        self.connect((self.low_pass_filter_0_0, 0), (self.analog_nbfm_rx_0_0, 0))
        self.connect((self.low_pass_filter_0_0_0_0_0_0, 0), (self.analog_nbfm_rx_0_0_0_0_0_0, 0))
        self.connect((self.low_pass_filter_0_0_0_0_1, 0), (self.analog_nbfm_rx_0_0_0_0_1, 0))
        self.connect((self.osmosdr_source_0, 0), (self.blocks_multiply_xx_0, 0))
        self.connect((self.osmosdr_source_0_0, 0), (self.blocks_multiply_xx_0_1, 0))
Esempio n. 27
0
    def __init__(self, options, filename):
        gr.top_block.__init__(self)

        inf_str = None
        symbol_rate = 152.34e3
        sample_rate = 1e6

        #if len(options) != 0:
        #	inf_str = args[0]

        squelch = analog.pwr_squelch_cc(float(options.squelch), 0.1, 0, True)
        demod = analog.quadrature_demod_cf(1.0)
        cr = digital.clock_recovery_mm_ff(sample_rate / symbol_rate,
                                          0.00765625, 0, 0.175, 0.005)
        slicer = digital.binary_slicer_fb()
        corr = digital.correlate_access_code_bb(AC, 3)
        sink = sniffer()

        if False:
            print "Reading from: " + inf_str
            src = blocks.file_source(gr.sizeof_gr_complex, inf_str, False)

        else:
            freqs = {
                'AA': 917.0e6,
                'AB': 913.0e6,
                'AC': 914.0e6,
                'AD': 915.0e6,
                'BA': 916.0e6,
                'BB': 919.0e6,
                'BC': 920.0e6,
                'BD': 921.0e6,
                'CA': 922.0e6,
                'CB': 923.0e6,
                'CC': 907.0e6,
                'CD': 908.0e6,
                'DA': 905.5e6,
                'DB': 909.0e6,
                'DC': 911.0e6,
                'DD': 910.0e6
            }

            frequency = freqs[options.channel]
            print "Channel: " + options.channel + " (" + str(
                frequency / 1e6) + "MHz)"

            # Create a UHD device source
            src = uhd.usrp_source(device_addr=options.args,
                                  stream_args=uhd.stream_args('fc32',
                                                              "sc16",
                                                              args=""))

            # Set the subdevice spec
            if (options.spec):
                src.set_subdev_spec(options.spec, 0)

            # Set the antenna
            if (options.antenna):
                src.set_antenna(options.antenna, 0)

            # Set receiver sample rate
            src.set_samp_rate(options.samp_rate)

            # Set receive daughterboard gain
            if options.gain is None:
                g = src.get_gain_range()
                options.gain = float(g.start() + g.stop()) / 2
                print "Using mid-point gain of", options.gain, "(", g.start(
                ), "-", g.stop(), ")"
                src.set_gain(options.gain)

            # Set frequency (tune request takes lo_offset)
            treq = uhd.tune_request(frequency)
            tr = src.set_center_freq(treq)
            if tr == None:
                sys.stderr.write('Failed to set center frequency\n')
                raise SystemExit, 1

        self.connect(src, squelch, demod, cr, slicer, corr, sink)
Esempio n. 28
0
File: cp04a.py Progetto: mr0w1/cp
    def __init__(self):
        gr.top_block.__init__(self, "CP v0.4a")
        Qt.QWidget.__init__(self)
        self.setWindowTitle("CP v0.4a")
        try:
             self.setWindowIcon(Qt.QIcon.fromTheme('gnuradio-grc'))
        except:
             pass
        self.top_scroll_layout = Qt.QVBoxLayout()
        self.setLayout(self.top_scroll_layout)
        self.top_scroll = Qt.QScrollArea()
        self.top_scroll.setFrameStyle(Qt.QFrame.NoFrame)
        self.top_scroll_layout.addWidget(self.top_scroll)
        self.top_scroll.setWidgetResizable(True)
        self.top_widget = Qt.QWidget()
        self.top_scroll.setWidget(self.top_widget)
        self.top_layout = Qt.QVBoxLayout(self.top_widget)
        self.top_grid_layout = Qt.QGridLayout()
        self.top_layout.addLayout(self.top_grid_layout)

        self.settings = Qt.QSettings("GNU Radio", "cp04a")
        self.restoreGeometry(self.settings.value("geometry").toByteArray())

        ##################################################
        # Variables
        ##################################################
        self.radio_freq = radio_freq = 100
        self.samp_rate = samp_rate = 2.4e6
        self.rf_gain = rf_gain = 10
        self.freq = freq = radio_freq * 1000000
        self.ch3_volume = ch3_volume = 1
        self.ch3_squelch = ch3_squelch = -30
        self.ch3_mute = ch3_mute = 1
        self.ch3_modulation = ch3_modulation = 0
        self.ch3_invert = ch3_invert = 1
        self.ch3_freq = ch3_freq = radio_freq
        self.ch2_volume = ch2_volume = 1
        self.ch2_squelch = ch2_squelch = -30
        self.ch2_mute = ch2_mute = 1
        self.ch2_modulation = ch2_modulation = 0
        self.ch2_invert = ch2_invert = 1
        self.ch2_freq = ch2_freq = radio_freq
        self.ch1_volume = ch1_volume = 1
        self.ch1_squelch = ch1_squelch = -30
        self.ch1_mute = ch1_mute = 1
        self.ch1_modulation = ch1_modulation = 0
        self.ch1_invert = ch1_invert = 1
        self.ch1_freq = ch1_freq = radio_freq

        ##################################################
        # Blocks
        ##################################################
        self.settings = Qt.QTabWidget()
        self.settings_widget_0 = Qt.QWidget()
        self.settings_layout_0 = Qt.QBoxLayout(Qt.QBoxLayout.TopToBottom, self.settings_widget_0)
        self.settings_grid_layout_0 = Qt.QGridLayout()
        self.settings_layout_0.addLayout(self.settings_grid_layout_0)
        self.settings.addTab(self.settings_widget_0, "Settings")
        self.top_grid_layout.addWidget(self.settings, 4,3,2,3)
        self.tabs = Qt.QTabWidget()
        self.tabs_widget_0 = Qt.QWidget()
        self.tabs_layout_0 = Qt.QBoxLayout(Qt.QBoxLayout.TopToBottom, self.tabs_widget_0)
        self.tabs_grid_layout_0 = Qt.QGridLayout()
        self.tabs_layout_0.addLayout(self.tabs_grid_layout_0)
        self.tabs.addTab(self.tabs_widget_0, "Ch 1")
        self.tabs_widget_1 = Qt.QWidget()
        self.tabs_layout_1 = Qt.QBoxLayout(Qt.QBoxLayout.TopToBottom, self.tabs_widget_1)
        self.tabs_grid_layout_1 = Qt.QGridLayout()
        self.tabs_layout_1.addLayout(self.tabs_grid_layout_1)
        self.tabs.addTab(self.tabs_widget_1, "Ch 2")
        self.tabs_widget_2 = Qt.QWidget()
        self.tabs_layout_2 = Qt.QBoxLayout(Qt.QBoxLayout.TopToBottom, self.tabs_widget_2)
        self.tabs_grid_layout_2 = Qt.QGridLayout()
        self.tabs_layout_2.addLayout(self.tabs_grid_layout_2)
        self.tabs.addTab(self.tabs_widget_2, "Ch 3")
        self.top_grid_layout.addWidget(self.tabs, 4,0,2,3)
        self._rf_gain_range = Range(0, 50, 1, 10, 100)
        self._rf_gain_win = RangeWidget(self._rf_gain_range, self.set_rf_gain, "RF Gain", "counter_slider", float)
        self.settings_grid_layout_0.addWidget(self._rf_gain_win, 1,0,1,1)
        self._ch2_volume_range = Range(0, 10, 1, 1, 50)
        self._ch2_volume_win = RangeWidget(self._ch2_volume_range, self.set_ch2_volume, "Volume", "counter_slider", int)
        self.top_grid_layout.addWidget(self._ch2_volume_win, 1,2,1,1)
        self._ch2_squelch_range = Range(-70, 0, 10, -30, 50)
        self._ch2_squelch_win = RangeWidget(self._ch2_squelch_range, self.set_ch2_squelch, "Squelch", "counter_slider", int)
        self.top_grid_layout.addWidget(self._ch2_squelch_win, 1,3,1,1)
        _ch2_mute_check_box = Qt.QCheckBox("Mute")
        self._ch2_mute_choices = {True: 0, False: 1}
        self._ch2_mute_choices_inv = dict((v,k) for k,v in self._ch2_mute_choices.iteritems())
        self._ch2_mute_callback = lambda i: Qt.QMetaObject.invokeMethod(_ch2_mute_check_box, "setChecked", Qt.Q_ARG("bool", self._ch2_mute_choices_inv[i]))
        self._ch2_mute_callback(self.ch2_mute)
        _ch2_mute_check_box.stateChanged.connect(lambda i: self.set_ch2_mute(self._ch2_mute_choices[bool(i)]))
        self.top_grid_layout.addWidget(_ch2_mute_check_box, 1,5,1,1)
        self._ch2_modulation_options = (0, 1, 2, )
        self._ch2_modulation_labels = ("DMR", "NBFM", "WBFM", )
        self._ch2_modulation_tool_bar = Qt.QToolBar(self)
        self._ch2_modulation_tool_bar.addWidget(Qt.QLabel("Modulation"+": "))
        self._ch2_modulation_combo_box = Qt.QComboBox()
        self._ch2_modulation_tool_bar.addWidget(self._ch2_modulation_combo_box)
        for label in self._ch2_modulation_labels: self._ch2_modulation_combo_box.addItem(label)
        self._ch2_modulation_callback = lambda i: Qt.QMetaObject.invokeMethod(self._ch2_modulation_combo_box, "setCurrentIndex", Qt.Q_ARG("int", self._ch2_modulation_options.index(i)))
        self._ch2_modulation_callback(self.ch2_modulation)
        self._ch2_modulation_combo_box.currentIndexChanged.connect(
        	lambda i: self.set_ch2_modulation(self._ch2_modulation_options[i]))
        self.top_grid_layout.addWidget(self._ch2_modulation_tool_bar, 1,1,1,1)
        _ch2_invert_check_box = Qt.QCheckBox("Invert")
        self._ch2_invert_choices = {True: -1, False: 1}
        self._ch2_invert_choices_inv = dict((v,k) for k,v in self._ch2_invert_choices.iteritems())
        self._ch2_invert_callback = lambda i: Qt.QMetaObject.invokeMethod(_ch2_invert_check_box, "setChecked", Qt.Q_ARG("bool", self._ch2_invert_choices_inv[i]))
        self._ch2_invert_callback(self.ch2_invert)
        _ch2_invert_check_box.stateChanged.connect(lambda i: self.set_ch2_invert(self._ch2_invert_choices[bool(i)]))
        self.top_grid_layout.addWidget(_ch2_invert_check_box, 1,4,1,1)
        self._ch2_freq_tool_bar = Qt.QToolBar(self)
        self._ch2_freq_tool_bar.addWidget(Qt.QLabel("Ch2 Freq (MHz)"+": "))
        self._ch2_freq_line_edit = Qt.QLineEdit(str(self.ch2_freq))
        self._ch2_freq_tool_bar.addWidget(self._ch2_freq_line_edit)
        self._ch2_freq_line_edit.returnPressed.connect(
        	lambda: self.set_ch2_freq(eng_notation.str_to_num(str(self._ch2_freq_line_edit.text().toAscii()))))
        self.top_grid_layout.addWidget(self._ch2_freq_tool_bar, 1,0,1,1)
        self._ch1_volume_range = Range(0, 10, 1, 1, 100)
        self._ch1_volume_win = RangeWidget(self._ch1_volume_range, self.set_ch1_volume, "Volume", "counter_slider", int)
        self.top_grid_layout.addWidget(self._ch1_volume_win, 0,2,1,1)
        self._ch1_squelch_range = Range(-70, 0, 10, -30, 100)
        self._ch1_squelch_win = RangeWidget(self._ch1_squelch_range, self.set_ch1_squelch, "Squelch", "counter_slider", int)
        self.top_grid_layout.addWidget(self._ch1_squelch_win, 0,3,1,1)
        _ch1_mute_check_box = Qt.QCheckBox("Mute")
        self._ch1_mute_choices = {True: 0, False: 1}
        self._ch1_mute_choices_inv = dict((v,k) for k,v in self._ch1_mute_choices.iteritems())
        self._ch1_mute_callback = lambda i: Qt.QMetaObject.invokeMethod(_ch1_mute_check_box, "setChecked", Qt.Q_ARG("bool", self._ch1_mute_choices_inv[i]))
        self._ch1_mute_callback(self.ch1_mute)
        _ch1_mute_check_box.stateChanged.connect(lambda i: self.set_ch1_mute(self._ch1_mute_choices[bool(i)]))
        self.top_grid_layout.addWidget(_ch1_mute_check_box, 0,5,1,1)
        self._ch1_modulation_options = (0, 1, 2, )
        self._ch1_modulation_labels = ("DMR", "NBFM", "WBFM", )
        self._ch1_modulation_tool_bar = Qt.QToolBar(self)
        self._ch1_modulation_tool_bar.addWidget(Qt.QLabel("Modulation"+": "))
        self._ch1_modulation_combo_box = Qt.QComboBox()
        self._ch1_modulation_tool_bar.addWidget(self._ch1_modulation_combo_box)
        for label in self._ch1_modulation_labels: self._ch1_modulation_combo_box.addItem(label)
        self._ch1_modulation_callback = lambda i: Qt.QMetaObject.invokeMethod(self._ch1_modulation_combo_box, "setCurrentIndex", Qt.Q_ARG("int", self._ch1_modulation_options.index(i)))
        self._ch1_modulation_callback(self.ch1_modulation)
        self._ch1_modulation_combo_box.currentIndexChanged.connect(
        	lambda i: self.set_ch1_modulation(self._ch1_modulation_options[i]))
        self.top_grid_layout.addWidget(self._ch1_modulation_tool_bar, 0,1,1,1)
        _ch1_invert_check_box = Qt.QCheckBox("Invert")
        self._ch1_invert_choices = {True: -1, False: 1}
        self._ch1_invert_choices_inv = dict((v,k) for k,v in self._ch1_invert_choices.iteritems())
        self._ch1_invert_callback = lambda i: Qt.QMetaObject.invokeMethod(_ch1_invert_check_box, "setChecked", Qt.Q_ARG("bool", self._ch1_invert_choices_inv[i]))
        self._ch1_invert_callback(self.ch1_invert)
        _ch1_invert_check_box.stateChanged.connect(lambda i: self.set_ch1_invert(self._ch1_invert_choices[bool(i)]))
        self.top_grid_layout.addWidget(_ch1_invert_check_box, 0,4,1,1)
        self._ch1_freq_tool_bar = Qt.QToolBar(self)
        self._ch1_freq_tool_bar.addWidget(Qt.QLabel("Ch1 Freq (MHz)"+": "))
        self._ch1_freq_line_edit = Qt.QLineEdit(str(self.ch1_freq))
        self._ch1_freq_tool_bar.addWidget(self._ch1_freq_line_edit)
        self._ch1_freq_line_edit.returnPressed.connect(
        	lambda: self.set_ch1_freq(eng_notation.str_to_num(str(self._ch1_freq_line_edit.text().toAscii()))))
        self.top_grid_layout.addWidget(self._ch1_freq_tool_bar, 0,0,1,1)
        self.wbfm_chain_0_0 = wbfm_chain()
        self.wbfm_chain_0 = wbfm_chain()
        self.rtlsdr_source_0 = osmosdr.source( args="numchan=" + str(1) + " " + "" )
        self.rtlsdr_source_0.set_sample_rate(samp_rate)
        self.rtlsdr_source_0.set_center_freq(freq, 0)
        self.rtlsdr_source_0.set_freq_corr(0, 0)
        self.rtlsdr_source_0.set_dc_offset_mode(0, 0)
        self.rtlsdr_source_0.set_iq_balance_mode(0, 0)
        self.rtlsdr_source_0.set_gain_mode(False, 0)
        self.rtlsdr_source_0.set_gain(rf_gain, 0)
        self.rtlsdr_source_0.set_if_gain(20, 0)
        self.rtlsdr_source_0.set_bb_gain(20, 0)
        self.rtlsdr_source_0.set_antenna("", 0)
        self.rtlsdr_source_0.set_bandwidth(0, 0)
          
        self.rational_resampler_xxx_0_0 = filter.rational_resampler_ccc(
                interpolation=400000,
                decimation=2400000,
                taps=None,
                fractional_bw=None,
        )
        self.rational_resampler_xxx_0 = filter.rational_resampler_ccc(
                interpolation=400000,
                decimation=2400000,
                taps=None,
                fractional_bw=None,
        )
        self._radio_freq_tool_bar = Qt.QToolBar(self)
        self._radio_freq_tool_bar.addWidget(Qt.QLabel("Radio Freq (MHz)"+": "))
        self._radio_freq_line_edit = Qt.QLineEdit(str(self.radio_freq))
        self._radio_freq_tool_bar.addWidget(self._radio_freq_line_edit)
        self._radio_freq_line_edit.returnPressed.connect(
        	lambda: self.set_radio_freq(eng_notation.str_to_num(str(self._radio_freq_line_edit.text().toAscii()))))
        self.settings_grid_layout_0.addWidget(self._radio_freq_tool_bar, 0,0,1,1)
        self.qtgui_waterfall_sink_x_0 = qtgui.waterfall_sink_c(
        	1024, #size
        	firdes.WIN_BLACKMAN_hARRIS, #wintype
        	freq, #fc
        	samp_rate, #bw
        	"", #name
                1 #number of inputs
        )
        self.qtgui_waterfall_sink_x_0.set_update_time(0.10)
        self.qtgui_waterfall_sink_x_0.enable_grid(False)
        
        if not True:
          self.qtgui_waterfall_sink_x_0.disable_legend()
        
        if complex == type(float()):
          self.qtgui_waterfall_sink_x_0.set_plot_pos_half(not True)
        
        labels = ["", "", "", "", "",
                  "", "", "", "", ""]
        colors = [0, 0, 0, 0, 0,
                  0, 0, 0, 0, 0]
        alphas = [1.0, 1.0, 1.0, 1.0, 1.0,
                  1.0, 1.0, 1.0, 1.0, 1.0]
        for i in xrange(1):
            if len(labels[i]) == 0:
                self.qtgui_waterfall_sink_x_0.set_line_label(i, "Data {0}".format(i))
            else:
                self.qtgui_waterfall_sink_x_0.set_line_label(i, labels[i])
            self.qtgui_waterfall_sink_x_0.set_color_map(i, colors[i])
            self.qtgui_waterfall_sink_x_0.set_line_alpha(i, alphas[i])
        
        self.qtgui_waterfall_sink_x_0.set_intensity_range(-140, 10)
        
        self._qtgui_waterfall_sink_x_0_win = sip.wrapinstance(self.qtgui_waterfall_sink_x_0.pyqwidget(), Qt.QWidget)
        self.top_grid_layout.addWidget(self._qtgui_waterfall_sink_x_0_win, 10,0,10,6)
        self.qtgui_freq_sink_x_0_0 = qtgui.freq_sink_c(
        	512, #size
        	firdes.WIN_BLACKMAN_hARRIS, #wintype
        	(ch2_freq * 1000000), #fc
        	400000, #bw
        	"", #name
        	1 #number of inputs
        )
        self.qtgui_freq_sink_x_0_0.set_update_time(0.10)
        self.qtgui_freq_sink_x_0_0.set_y_axis(-140, 10)
        self.qtgui_freq_sink_x_0_0.set_trigger_mode(qtgui.TRIG_MODE_FREE, 0.0, 0, "")
        self.qtgui_freq_sink_x_0_0.enable_autoscale(False)
        self.qtgui_freq_sink_x_0_0.enable_grid(False)
        self.qtgui_freq_sink_x_0_0.set_fft_average(0.2)
        self.qtgui_freq_sink_x_0_0.enable_control_panel(False)
        
        if not True:
          self.qtgui_freq_sink_x_0_0.disable_legend()
        
        if complex == type(float()):
          self.qtgui_freq_sink_x_0_0.set_plot_pos_half(not True)
        
        labels = ["", "", "", "", "",
                  "", "", "", "", ""]
        widths = [1, 1, 1, 1, 1,
                  1, 1, 1, 1, 1]
        colors = ["blue", "red", "green", "black", "cyan",
                  "magenta", "yellow", "dark red", "dark green", "dark blue"]
        alphas = [1.0, 1.0, 1.0, 1.0, 1.0,
                  1.0, 1.0, 1.0, 1.0, 1.0]
        for i in xrange(1):
            if len(labels[i]) == 0:
                self.qtgui_freq_sink_x_0_0.set_line_label(i, "Data {0}".format(i))
            else:
                self.qtgui_freq_sink_x_0_0.set_line_label(i, labels[i])
            self.qtgui_freq_sink_x_0_0.set_line_width(i, widths[i])
            self.qtgui_freq_sink_x_0_0.set_line_color(i, colors[i])
            self.qtgui_freq_sink_x_0_0.set_line_alpha(i, alphas[i])
        
        self._qtgui_freq_sink_x_0_0_win = sip.wrapinstance(self.qtgui_freq_sink_x_0_0.pyqwidget(), Qt.QWidget)
        self.tabs_grid_layout_1.addWidget(self._qtgui_freq_sink_x_0_0_win, 0,0,1,1)
        self.qtgui_freq_sink_x_0 = qtgui.freq_sink_c(
        	512, #size
        	firdes.WIN_BLACKMAN_hARRIS, #wintype
        	(ch1_freq * 1000000), #fc
        	400000, #bw
        	"", #name
        	1 #number of inputs
        )
        self.qtgui_freq_sink_x_0.set_update_time(0.10)
        self.qtgui_freq_sink_x_0.set_y_axis(-140, 10)
        self.qtgui_freq_sink_x_0.set_trigger_mode(qtgui.TRIG_MODE_FREE, 0.0, 0, "")
        self.qtgui_freq_sink_x_0.enable_autoscale(False)
        self.qtgui_freq_sink_x_0.enable_grid(False)
        self.qtgui_freq_sink_x_0.set_fft_average(0.2)
        self.qtgui_freq_sink_x_0.enable_control_panel(False)
        
        if not True:
          self.qtgui_freq_sink_x_0.disable_legend()
        
        if complex == type(float()):
          self.qtgui_freq_sink_x_0.set_plot_pos_half(not True)
        
        labels = ["", "", "", "", "",
                  "", "", "", "", ""]
        widths = [1, 1, 1, 1, 1,
                  1, 1, 1, 1, 1]
        colors = ["blue", "red", "green", "black", "cyan",
                  "magenta", "yellow", "dark red", "dark green", "dark blue"]
        alphas = [1.0, 1.0, 1.0, 1.0, 1.0,
                  1.0, 1.0, 1.0, 1.0, 1.0]
        for i in xrange(1):
            if len(labels[i]) == 0:
                self.qtgui_freq_sink_x_0.set_line_label(i, "Data {0}".format(i))
            else:
                self.qtgui_freq_sink_x_0.set_line_label(i, labels[i])
            self.qtgui_freq_sink_x_0.set_line_width(i, widths[i])
            self.qtgui_freq_sink_x_0.set_line_color(i, colors[i])
            self.qtgui_freq_sink_x_0.set_line_alpha(i, alphas[i])
        
        self._qtgui_freq_sink_x_0_win = sip.wrapinstance(self.qtgui_freq_sink_x_0.pyqwidget(), Qt.QWidget)
        self.tabs_grid_layout_0.addWidget(self._qtgui_freq_sink_x_0_win, 0,0,1,1)
        self.nbfm_chain_0_0 = nbfm_chain()
        self.nbfm_chain_0 = nbfm_chain()
        self.freq_xlating_fft_filter_ccc_0_0 = filter.freq_xlating_fft_filter_ccc(1, (firdes.low_pass(1,samp_rate,200000,10000)), (ch2_freq * 1000000) - freq, samp_rate)
        self.freq_xlating_fft_filter_ccc_0_0.set_nthreads(1)
        self.freq_xlating_fft_filter_ccc_0_0.declare_sample_delay(0)
        self.freq_xlating_fft_filter_ccc_0 = filter.freq_xlating_fft_filter_ccc(1, (firdes.low_pass(1,samp_rate,200000,10000)), (ch1_freq * 1000000) - freq, samp_rate)
        self.freq_xlating_fft_filter_ccc_0.set_nthreads(1)
        self.freq_xlating_fft_filter_ccc_0.declare_sample_delay(0)
        self.dsd_chain_0_0 = dsd_chain()
        self.dsd_chain_0 = dsd_chain()
        self._ch3_volume_range = Range(0, 10, 1, 1, 50)
        self._ch3_volume_win = RangeWidget(self._ch3_volume_range, self.set_ch3_volume, "Volume", "counter_slider", int)
        self.top_grid_layout.addWidget(self._ch3_volume_win, 2,2,1,1)
        self._ch3_squelch_range = Range(-70, 0, 10, -30, 50)
        self._ch3_squelch_win = RangeWidget(self._ch3_squelch_range, self.set_ch3_squelch, "Squelch", "counter_slider", int)
        self.top_grid_layout.addWidget(self._ch3_squelch_win, 2,3,1,1)
        _ch3_mute_check_box = Qt.QCheckBox("Mute")
        self._ch3_mute_choices = {True: 0, False: 1}
        self._ch3_mute_choices_inv = dict((v,k) for k,v in self._ch3_mute_choices.iteritems())
        self._ch3_mute_callback = lambda i: Qt.QMetaObject.invokeMethod(_ch3_mute_check_box, "setChecked", Qt.Q_ARG("bool", self._ch3_mute_choices_inv[i]))
        self._ch3_mute_callback(self.ch3_mute)
        _ch3_mute_check_box.stateChanged.connect(lambda i: self.set_ch3_mute(self._ch3_mute_choices[bool(i)]))
        self.top_grid_layout.addWidget(_ch3_mute_check_box, 2,5,1,1)
        self._ch3_modulation_options = (0, 1, 2, )
        self._ch3_modulation_labels = ("DMR", "NBFM", "WBFM", )
        self._ch3_modulation_tool_bar = Qt.QToolBar(self)
        self._ch3_modulation_tool_bar.addWidget(Qt.QLabel("Modulation"+": "))
        self._ch3_modulation_combo_box = Qt.QComboBox()
        self._ch3_modulation_tool_bar.addWidget(self._ch3_modulation_combo_box)
        for label in self._ch3_modulation_labels: self._ch3_modulation_combo_box.addItem(label)
        self._ch3_modulation_callback = lambda i: Qt.QMetaObject.invokeMethod(self._ch3_modulation_combo_box, "setCurrentIndex", Qt.Q_ARG("int", self._ch3_modulation_options.index(i)))
        self._ch3_modulation_callback(self.ch3_modulation)
        self._ch3_modulation_combo_box.currentIndexChanged.connect(
        	lambda i: self.set_ch3_modulation(self._ch3_modulation_options[i]))
        self.top_grid_layout.addWidget(self._ch3_modulation_tool_bar, 2,1,1,1)
        _ch3_invert_check_box = Qt.QCheckBox("Invert")
        self._ch3_invert_choices = {True: -1, False: 1}
        self._ch3_invert_choices_inv = dict((v,k) for k,v in self._ch3_invert_choices.iteritems())
        self._ch3_invert_callback = lambda i: Qt.QMetaObject.invokeMethod(_ch3_invert_check_box, "setChecked", Qt.Q_ARG("bool", self._ch3_invert_choices_inv[i]))
        self._ch3_invert_callback(self.ch3_invert)
        _ch3_invert_check_box.stateChanged.connect(lambda i: self.set_ch3_invert(self._ch3_invert_choices[bool(i)]))
        self.top_grid_layout.addWidget(_ch3_invert_check_box, 2,4,1,1)
        self._ch3_freq_tool_bar = Qt.QToolBar(self)
        self._ch3_freq_tool_bar.addWidget(Qt.QLabel("Ch3 Freq (MHz)"+": "))
        self._ch3_freq_line_edit = Qt.QLineEdit(str(self.ch3_freq))
        self._ch3_freq_tool_bar.addWidget(self._ch3_freq_line_edit)
        self._ch3_freq_line_edit.returnPressed.connect(
        	lambda: self.set_ch3_freq(eng_notation.str_to_num(str(self._ch3_freq_line_edit.text().toAscii()))))
        self.top_grid_layout.addWidget(self._ch3_freq_tool_bar, 2,0,1,1)
        self.blocks_multiply_const_vxx_1_0 = blocks.multiply_const_vff((ch2_invert * ch2_mute, ))
        self.blocks_multiply_const_vxx_1 = blocks.multiply_const_vff((ch1_invert * ch1_mute, ))
        self.blocks_multiply_const_vxx_0_0 = blocks.multiply_const_vff((ch2_volume, ))
        self.blocks_multiply_const_vxx_0 = blocks.multiply_const_vff((ch1_volume, ))
        self.blks2_selector_0_1 = grc_blks2.selector(
        	item_size=gr.sizeof_gr_complex*1,
        	num_inputs=1,
        	num_outputs=3,
        	input_index=0,
        	output_index=ch2_modulation,
        )
        self.blks2_selector_0_0_0 = grc_blks2.selector(
        	item_size=gr.sizeof_float*1,
        	num_inputs=3,
        	num_outputs=1,
        	input_index=ch2_modulation,
        	output_index=0,
        )
        self.blks2_selector_0_0 = grc_blks2.selector(
        	item_size=gr.sizeof_float*1,
        	num_inputs=3,
        	num_outputs=1,
        	input_index=ch1_modulation,
        	output_index=0,
        )
        self.blks2_selector_0 = grc_blks2.selector(
        	item_size=gr.sizeof_gr_complex*1,
        	num_inputs=1,
        	num_outputs=3,
        	input_index=0,
        	output_index=ch1_modulation,
        )
        self.audio_sink_0_0 = audio.sink(48000, "", True)
        self.audio_sink_0 = audio.sink(48000, "", True)
        self.analog_pwr_squelch_xx_0_0_0 = analog.pwr_squelch_cc(ch2_squelch, 1e-4, 0, True)
        self.analog_pwr_squelch_xx_0_0 = analog.pwr_squelch_cc(ch1_squelch, 1e-4, 0, True)

        ##################################################
        # Connections
        ##################################################
        self.connect((self.analog_pwr_squelch_xx_0_0, 0), (self.blks2_selector_0, 0))    
        self.connect((self.analog_pwr_squelch_xx_0_0_0, 0), (self.blks2_selector_0_1, 0))    
        self.connect((self.blks2_selector_0, 0), (self.dsd_chain_0, 0))    
        self.connect((self.blks2_selector_0, 1), (self.nbfm_chain_0, 0))    
        self.connect((self.blks2_selector_0, 2), (self.wbfm_chain_0, 0))    
        self.connect((self.blks2_selector_0_0, 0), (self.blocks_multiply_const_vxx_0, 0))    
        self.connect((self.blks2_selector_0_0_0, 0), (self.blocks_multiply_const_vxx_0_0, 0))    
        self.connect((self.blks2_selector_0_1, 0), (self.dsd_chain_0_0, 0))    
        self.connect((self.blks2_selector_0_1, 1), (self.nbfm_chain_0_0, 0))    
        self.connect((self.blks2_selector_0_1, 2), (self.wbfm_chain_0_0, 0))    
        self.connect((self.blocks_multiply_const_vxx_0, 0), (self.blocks_multiply_const_vxx_1, 0))    
        self.connect((self.blocks_multiply_const_vxx_0_0, 0), (self.blocks_multiply_const_vxx_1_0, 0))    
        self.connect((self.blocks_multiply_const_vxx_1, 0), (self.audio_sink_0, 0))    
        self.connect((self.blocks_multiply_const_vxx_1_0, 0), (self.audio_sink_0_0, 0))    
        self.connect((self.dsd_chain_0, 0), (self.blks2_selector_0_0, 0))    
        self.connect((self.dsd_chain_0_0, 0), (self.blks2_selector_0_0_0, 0))    
        self.connect((self.freq_xlating_fft_filter_ccc_0, 0), (self.analog_pwr_squelch_xx_0_0, 0))    
        self.connect((self.freq_xlating_fft_filter_ccc_0, 0), (self.rational_resampler_xxx_0, 0))    
        self.connect((self.freq_xlating_fft_filter_ccc_0_0, 0), (self.analog_pwr_squelch_xx_0_0_0, 0))    
        self.connect((self.freq_xlating_fft_filter_ccc_0_0, 0), (self.rational_resampler_xxx_0_0, 0))    
        self.connect((self.nbfm_chain_0, 0), (self.blks2_selector_0_0, 1))    
        self.connect((self.nbfm_chain_0_0, 0), (self.blks2_selector_0_0_0, 1))    
        self.connect((self.rational_resampler_xxx_0, 0), (self.qtgui_freq_sink_x_0, 0))    
        self.connect((self.rational_resampler_xxx_0_0, 0), (self.qtgui_freq_sink_x_0_0, 0))    
        self.connect((self.rtlsdr_source_0, 0), (self.freq_xlating_fft_filter_ccc_0, 0))    
        self.connect((self.rtlsdr_source_0, 0), (self.freq_xlating_fft_filter_ccc_0_0, 0))    
        self.connect((self.rtlsdr_source_0, 0), (self.qtgui_waterfall_sink_x_0, 0))    
        self.connect((self.wbfm_chain_0, 0), (self.blks2_selector_0_0, 2))    
        self.connect((self.wbfm_chain_0_0, 0), (self.blks2_selector_0_0_0, 2))    
Esempio n. 29
0
    def __init__(self):

        # Call the initialization method from the parent class
        gr.top_block.__init__(self)

        # Setup the parser for command line arguments
        parser = OptionParser(option_class=eng_option)
        parser.add_option("-v", "--verbose", action="store_true",
                          dest="verbose", default=False,
                          help="print settings to stdout")
        parser.add_option("-a", "--args", type="string", dest="src_args",
                          default='addr=192.168.1.13',
                          help="USRP device address args")
        parser.add_option("-g", "--gain", type="eng_float", dest="src_gain",
                          default=0, help="USRP gain in dB")
        parser.add_option("-q", "--squelch", type="eng_float",
                          dest="squelch_thresh", default=-80,
                          help="Squelch threshold in dB")
        parser.add_option("-s", "--soundrate", type="eng_float",
                          dest="snd_card_rate", default=48000,
                          help="Sound card rate in Hz (must be n*100 Hz)")
        parser.add_option("-c", "--channels", type="string",
                          dest="channel_file_name",
                          default='channels.txt',
                          help="Text file of EOL delimited channels in Hz")

        (options, args) = parser.parse_args()
        if len(args) != 0:
            parser.print_help()
            raise SystemExit, 1

        # Define the user constants
        src_args = str(options.src_args)
        src_gain = float(options.src_gain)
        squelch_thresh = float(options.squelch_thresh)
        snd_card_rate = int(options.snd_card_rate)
        channel_file_name = str(options.channel_file_name)

        # Define other constants (don't mess with these)
        max_rf_bandwidth = 25E6 # Limited by N210
        channel_sample_rate = 20000
        nbfm_maxdev = 2.5E3
        nbfm_tau = 75E-6

        # Open file, split to list, remove empty strings, and convert to float
        with open(channel_file_name) as chanfile:
            lines = chanfile.read().splitlines()
        chanfile.close()
        lines = __builtin__.filter(None, lines)
        chanlist = [float(chan) for chan in lines]

        # Source decimation is first deternmined by the required RF bandwidth
        rf_bandwidth = max(chanlist) - min(chanlist) + 2*channel_sample_rate
        src_decimation = int(math.floor(max_rf_bandwidth/rf_bandwidth))

        # Check if rf_bandwidth is too wide
        if rf_bandwidth > max_rf_bandwidth:
            print 'Error: Channels spaced beyond the \
                %f MHz maximum RF bandwidth!' % (max_rf_bandwidth/1E6)
            sys.exit([1])
        else:
            pass

        # Don't let the source decimation go above 100 (USRP N210 limit)
        if src_decimation > 100:
            src_decimation = 100

        # This is a little tricky
        # Don't want odd values of source decimation greater than 1
        # Also want the source sample rate \
        # to be an integer multiple of channel sample rate
        src_sample_rate = max_rf_bandwidth / src_decimation
        while ((src_decimation%2 != 0) or \
            ((max_rf_bandwidth/src_decimation) % channel_sample_rate != 0)) \
            and src_decimation > 1:
            src_decimation = src_decimation - 1
            src_sample_rate = max_rf_bandwidth / src_decimation

        # Calculate the channel decimation for the fxlating filter
        # (it will be an integer)
        channel_decimation = int(src_sample_rate / channel_sample_rate)

        # Calculate center frequency
        src_center_freq = (max(chanlist) + min(chanlist)) / 2

        # Print some info to stdout for verbose option
        if options.verbose:
            print 'Source args string "%s" ' % src_args
            print 'Source center frequency = %f MHz' % (src_center_freq/1E6)
            print 'Source decimation = %i' % src_decimation
            print 'Source sample rate = %i Hz' % src_sample_rate
            print 'Source gain = %i dB' % src_gain
            print 'Squelch threshold = %i dB' % squelch_thresh
            print 'Channel decimation = %i' % channel_decimation
            print 'Channel sample rate = %i Hz' % channel_sample_rate
            print 'Sound card rate = %i Hz' % snd_card_rate
            print 'Channel list = %s' % str(chanlist)

        # Setup the source
        src = uhd.usrp_source(src_args, uhd.io_type_t.COMPLEX_FLOAT32, 1)
        src.set_samp_rate(src_sample_rate)
        src.set_center_freq(src_center_freq, 0)
        src.set_gain(src_gain, 0)

        # Get USRP true center frequency
        # Do nothing with it as it's only a few Hz error
        #print src.get_center_freq()

        # Create N channel flows---------------------------------------------

        # Design taps for frequency translating FIR filter
        filter_taps = filter.firdes.low_pass(1.0,
                                             src_sample_rate,
                                             8E3,
                                             2E3,
                                             filter.firdes.WIN_HAMMING)

        # N parallel fxlating FIR filter with decimation to channel rate
        # Note how the tune freq is chan-src_center_freq ; reversed from GR 3.6
        fxlate = [filter.freq_xlating_fir_filter_ccc(channel_decimation,
                                                 filter_taps,
                                                 chan - src_center_freq,
                                                 src_sample_rate)
                  for chan in chanlist]

        # Power squelch (complex, non blocking) prior to NBFM
        squelch1 = [analog.pwr_squelch_cc(squelch_thresh,
                                          0.1,
                                          1,
                                          False) for chan in chanlist]

        # NBFM receiver
        nbfm = [analog.nbfm_rx(channel_sample_rate,
                               channel_sample_rate,
                               nbfm_tau,
                               nbfm_maxdev) for chan in chanlist]

        # Power squelch (float, blocking) prior to wav file resampling
        squelch2 = [analog.pwr_squelch_ff(squelch_thresh,
                                          0.1,
                                          1,
                                          True) for chan in chanlist]

        # Rational resampler for channel rate to 8 kHz wav file rate
        resampwav = [filter.rational_resampler_fff(8000,
                                                   int(channel_sample_rate))
                                                   for chan in chanlist]

        # Wav file sink
        wavfile = [blocks.wavfile_sink(str(int(chan))+'.wav',
                                       1,
                                       8000,
                                       8) for chan in chanlist]

        # Connect the blocks
        for chan in range(len(chanlist)):
            self.connect(src, fxlate[chan], squelch1[chan], nbfm[chan],
                         squelch2[chan], resampwav[chan], wavfile[chan])

        # Adder to sum the nbfm outputs for sound card
        adder = blocks.add_vff(1)

        # Rational resampler for channel rate to audio rate
        resampsc = filter.rational_resampler_fff(int(snd_card_rate),
                                                 int(channel_sample_rate))

        # Sound card sink
        sndcard = audio.sink(snd_card_rate, "", True)

        # Connect the blocks
        for chan in range(len(chanlist)):
            self.connect(nbfm[chan], (adder, chan))

        # Connect the blocks
        self.connect(adder, resampsc, sndcard)
Esempio n. 30
0
    def __init__(self, center_freq=433920000):
        gr.top_block.__init__(self, "Rx 2400 R2")

        ##################################################
        # Parameters
        ##################################################
        self.center_freq = center_freq

        ##################################################
        # Variables
        ##################################################
        self.sps = sps = 10
        self.baud_rate = baud_rate = 2530
        self.samp_rate_tx = samp_rate_tx = 400000
        self.samp_rate = samp_rate = baud_rate * sps
        self.rx_vga_gain = rx_vga_gain = 35
        self.rx_lna_gain = rx_lna_gain = 6
        self.quad_gain = quad_gain = 8
        self.freq = freq = 433920000
        self._fft_size_config = ConfigParser.ConfigParser()
        self._fft_size_config.read('default')
        try:
            fft_size = self._fft_size_config.getint('main', 'key')
        except:
            fft_size = 2048
        self.fft_size = fft_size

        ##################################################
        # Blocks
        ##################################################
        self.osmosdr_source_0 = osmosdr.source(args="numchan=" + str(1) + " " +
                                               'bladerf=0')
        self.osmosdr_source_0.set_sample_rate(samp_rate_tx)
        self.osmosdr_source_0.set_center_freq(freq, 0)
        self.osmosdr_source_0.set_freq_corr(0, 0)
        self.osmosdr_source_0.set_dc_offset_mode(1, 0)
        self.osmosdr_source_0.set_iq_balance_mode(1, 0)
        self.osmosdr_source_0.set_gain_mode(False, 0)
        self.osmosdr_source_0.set_gain(rx_lna_gain, 0)
        self.osmosdr_source_0.set_if_gain(0, 0)
        self.osmosdr_source_0.set_bb_gain(rx_vga_gain, 0)
        self.osmosdr_source_0.set_antenna('', 0)
        self.osmosdr_source_0.set_bandwidth(1500000, 0)

        self.low_pass_filter_0 = filter.fir_filter_ccf(
            1,
            firdes.low_pass(1, samp_rate_tx, 6000, 6000, firdes.WIN_HAMMING,
                            6.76))
        self.logpwrfft_x_0 = logpwrfft.logpwrfft_c(
            sample_rate=samp_rate_tx,
            fft_size=fft_size,
            ref_scale=2,
            frame_rate=1,
            avg_alpha=1.0,
            average=False,
        )
        self.fir_filter_xxx_0 = filter.fir_filter_fff(16, (firdes.low_pass(
            1.0, baud_rate * sps, baud_rate, 0.25 * baud_rate)))
        self.fir_filter_xxx_0.declare_sample_delay(0)
        self.digital_pfb_clock_sync_xxx_0 = digital.pfb_clock_sync_fff(
            sps, 2 * 3.14159265 / 100, (firdes.low_pass(
                1.0, baud_rate * sps, baud_rate, 0.25 * baud_rate)), 32, 16,
            1.5, 1)
        self.digital_binary_slicer_fb_0 = digital.binary_slicer_fb()
        self.blocks_vector_to_stream_0 = blocks.vector_to_stream(
            gr.sizeof_float * fft_size, 1)
        self.blocks_file_sink_0_0 = blocks.file_sink(gr.sizeof_char * 1,
                                                     '_out.bin', False)
        self.blocks_file_sink_0_0.set_unbuffered(True)
        self.blocks_file_sink_0 = blocks.file_sink(gr.sizeof_float * fft_size,
                                                   'log_power_fft_data.bin',
                                                   False)
        self.blocks_file_sink_0.set_unbuffered(False)
        self.blocks_add_const_vxx_0 = blocks.add_const_vff((0, ))
        self.analog_quadrature_demod_cf_0 = analog.quadrature_demod_cf(
            quad_gain)
        self.analog_pwr_squelch_xx_0 = analog.pwr_squelch_cc(
            -70, 1e-4, 0, True)

        ##################################################
        # Connections
        ##################################################
        self.connect((self.analog_pwr_squelch_xx_0, 0),
                     (self.low_pass_filter_0, 0))
        self.connect((self.analog_quadrature_demod_cf_0, 0),
                     (self.blocks_add_const_vxx_0, 0))
        self.connect((self.blocks_add_const_vxx_0, 0),
                     (self.digital_pfb_clock_sync_xxx_0, 0))
        self.connect((self.blocks_vector_to_stream_0, 0),
                     (self.blocks_file_sink_0, 0))
        self.connect((self.digital_binary_slicer_fb_0, 0),
                     (self.blocks_file_sink_0_0, 0))
        self.connect((self.digital_pfb_clock_sync_xxx_0, 0),
                     (self.fir_filter_xxx_0, 0))
        self.connect((self.fir_filter_xxx_0, 0),
                     (self.digital_binary_slicer_fb_0, 0))
        self.connect((self.logpwrfft_x_0, 0),
                     (self.blocks_vector_to_stream_0, 0))
        self.connect((self.low_pass_filter_0, 0),
                     (self.analog_quadrature_demod_cf_0, 0))
        self.connect((self.osmosdr_source_0, 0),
                     (self.analog_pwr_squelch_xx_0, 0))
        self.connect((self.osmosdr_source_0, 0), (self.logpwrfft_x_0, 0))
Esempio n. 31
0
    def __init__(self):
        grc_wxgui.top_block_gui.__init__(self, title="Top Block")
        _icon_path = "/usr/share/icons/hicolor/32x32/apps/gnuradio-grc.png"
        self.SetIcon(wx.Icon(_icon_path, wx.BITMAP_TYPE_ANY))

        ##################################################
        # Variables
        ##################################################
        self.samp_rate = samp_rate = 1000000
        self.deviation = deviation = 180000
        self.baud_rate = baud_rate = 49260
        self.sps = sps = ((float)(samp_rate)/(float)(baud_rate))
        self.modulation_index = modulation_index = (float)(deviation) / ((float)(baud_rate) / 2)
        self.Threshold = Threshold = -60
        self.Freq = Freq = 434000000

        ##################################################
        # Blocks
        ##################################################
        _Freq_sizer = wx.BoxSizer(wx.VERTICAL)
        self._Freq_text_box = forms.text_box(
        	parent=self.GetWin(),
        	sizer=_Freq_sizer,
        	value=self.Freq,
        	callback=self.set_Freq,
        	label="Frequency",
        	converter=forms.float_converter(),
        	proportion=0,
        )
        self._Freq_slider = forms.slider(
        	parent=self.GetWin(),
        	sizer=_Freq_sizer,
        	value=self.Freq,
        	callback=self.set_Freq,
        	minimum=430000000,
        	maximum=440000000,
        	num_steps=1000,
        	style=wx.SL_HORIZONTAL,
        	cast=float,
        	proportion=1,
        )
        self.Add(_Freq_sizer)
        self.uhd_usrp_source_0 = uhd.usrp_source(
        	",".join(("", "")),
        	uhd.stream_args(
        		cpu_format="fc32",
        		channels=range(1),
        	),
        )
        self.uhd_usrp_source_0.set_samp_rate(samp_rate)
        self.uhd_usrp_source_0.set_center_freq(Freq, 0)
        self.uhd_usrp_source_0.set_gain(0, 0)
        self.uhd_usrp_source_0.set_antenna("TX/RX", 0)
        self.uhd_usrp_source_0.set_bandwidth(samp_rate, 0)
        self.low_pass_filter_0_0 = filter.fir_filter_fff(1, firdes.low_pass(
        	1, samp_rate, 100e3, 100e3, firdes.WIN_HAMMING, 6.76))
        self.low_pass_filter_0 = filter.fir_filter_ccf(1, firdes.low_pass(
        	1, samp_rate, 200e3, 100e3, firdes.WIN_HAMMING, 6.76))
        self.digital_clock_recovery_mm_xx_0 = digital.clock_recovery_mm_ff(sps*(1+0.0), 0.1, 0, 0.1, 0.01)
        self.digital_binary_slicer_fb_0 = digital.binary_slicer_fb()
        self.blocks_file_sink_0 = blocks.file_sink(gr.sizeof_char*1, "/home/augusto/Documents/RXDigital.dat", False)
        self.blocks_file_sink_0.set_unbuffered(False)
        self.analog_quadrature_demod_cf_0 = analog.quadrature_demod_cf((float)(sps)/(math.pi * modulation_index))
        self.analog_pwr_squelch_xx_0 = analog.pwr_squelch_cc(Threshold, 1, 0, False)

        ##################################################
        # Connections
        ##################################################
        self.connect((self.analog_pwr_squelch_xx_0, 0), (self.low_pass_filter_0, 0))    
        self.connect((self.analog_quadrature_demod_cf_0, 0), (self.low_pass_filter_0_0, 0))    
        self.connect((self.digital_binary_slicer_fb_0, 0), (self.blocks_file_sink_0, 0))    
        self.connect((self.digital_clock_recovery_mm_xx_0, 0), (self.digital_binary_slicer_fb_0, 0))    
        self.connect((self.low_pass_filter_0, 0), (self.analog_quadrature_demod_cf_0, 0))    
        self.connect((self.low_pass_filter_0_0, 0), (self.digital_clock_recovery_mm_xx_0, 0))    
        self.connect((self.uhd_usrp_source_0, 0), (self.analog_pwr_squelch_xx_0, 0))    
Esempio n. 32
0
File: cp03a.py Progetto: mr0w1/cp
    def __init__(self):
        grc_wxgui.top_block_gui.__init__(self, title="CP v0.3a")
        _icon_path = "/usr/share/icons/hicolor/32x32/apps/gnuradio-grc.png"
        self.SetIcon(wx.Icon(_icon_path, wx.BITMAP_TYPE_ANY))

        ##################################################
        # Variables
        ##################################################
        self.freq = freq = 92.9e6
        self.samp_rate = samp_rate = 2.4e6
        self.ch3_volume = ch3_volume = 1
        self.ch3_squelch = ch3_squelch = -30
        self.ch3_mute = ch3_mute = 1
        self.ch3_modulation = ch3_modulation = 0
        self.ch3_invert = ch3_invert = 1
        self.ch3_freq = ch3_freq = freq
        self.ch2_volume = ch2_volume = 1
        self.ch2_squelch = ch2_squelch = -30
        self.ch2_mute = ch2_mute = 1
        self.ch2_modulation = ch2_modulation = 0
        self.ch2_invert = ch2_invert = 1
        self.ch2_freq = ch2_freq = freq
        self.ch1_volume = ch1_volume = 1
        self.ch1_squelch = ch1_squelch = -30
        self.ch1_mute = ch1_mute = 1
        self.ch1_modulation = ch1_modulation = 0
        self.ch1_invert = ch1_invert = 1
        self.ch1_freq = ch1_freq = freq

        ##################################################
        # Blocks
        ##################################################
        self.tab = self.tab = wx.Notebook(self.GetWin(), style=wx.NB_TOP)
        self.tab.AddPage(grc_wxgui.Panel(self.tab), "Ch 1")
        self.tab.AddPage(grc_wxgui.Panel(self.tab), "Ch 2")
        self.tab.AddPage(grc_wxgui.Panel(self.tab), "Ch 3")
        self.GridAdd(self.tab, 5, 0, 1, 7)
        self._freq_text_box = forms.text_box(
        	parent=self.GetWin(),
        	value=self.freq,
        	callback=self.set_freq,
        	label="Radio Center Freq",
        	converter=forms.float_converter(),
        )
        self.GridAdd(self._freq_text_box, 21, 0, 1, 10)
        _ch3_volume_sizer = wx.BoxSizer(wx.VERTICAL)
        self._ch3_volume_text_box = forms.text_box(
        	parent=self.GetWin(),
        	sizer=_ch3_volume_sizer,
        	value=self.ch3_volume,
        	callback=self.set_ch3_volume,
        	label="Volume",
        	converter=forms.float_converter(),
        	proportion=0,
        )
        self._ch3_volume_slider = forms.slider(
        	parent=self.GetWin(),
        	sizer=_ch3_volume_sizer,
        	value=self.ch3_volume,
        	callback=self.set_ch3_volume,
        	minimum=0,
        	maximum=10,
        	num_steps=20,
        	style=wx.SL_HORIZONTAL,
        	cast=float,
        	proportion=1,
        )
        self.GridAdd(_ch3_volume_sizer, 4, 2, 1, 1)
        _ch3_squelch_sizer = wx.BoxSizer(wx.VERTICAL)
        self._ch3_squelch_text_box = forms.text_box(
        	parent=self.GetWin(),
        	sizer=_ch3_squelch_sizer,
        	value=self.ch3_squelch,
        	callback=self.set_ch3_squelch,
        	label="Squelch",
        	converter=forms.float_converter(),
        	proportion=0,
        )
        self._ch3_squelch_slider = forms.slider(
        	parent=self.GetWin(),
        	sizer=_ch3_squelch_sizer,
        	value=self.ch3_squelch,
        	callback=self.set_ch3_squelch,
        	minimum=-70,
        	maximum=0,
        	num_steps=14,
        	style=wx.SL_HORIZONTAL,
        	cast=float,
        	proportion=1,
        )
        self.GridAdd(_ch3_squelch_sizer, 4, 3, 1, 1)
        self._ch3_mute_check_box = forms.check_box(
        	parent=self.GetWin(),
        	value=self.ch3_mute,
        	callback=self.set_ch3_mute,
        	label="Mute",
        	true=0,
        	false=1,
        )
        self.GridAdd(self._ch3_mute_check_box, 4, 5, 1, 1)
        self._ch3_modulation_chooser = forms.drop_down(
        	parent=self.GetWin(),
        	value=self.ch3_modulation,
        	callback=self.set_ch3_modulation,
        	label="Modulation",
        	choices=[0, 1,2],
        	labels=["DMR","NBFM","WBFM"],
        )
        self.GridAdd(self._ch3_modulation_chooser, 4, 1, 1, 1)
        self._ch3_invert_check_box = forms.check_box(
        	parent=self.GetWin(),
        	value=self.ch3_invert,
        	callback=self.set_ch3_invert,
        	label="Invert",
        	true=-1,
        	false=1,
        )
        self.GridAdd(self._ch3_invert_check_box, 4, 4, 1, 1)
        self._ch3_freq_text_box = forms.text_box(
        	parent=self.GetWin(),
        	value=self.ch3_freq,
        	callback=self.set_ch3_freq,
        	label="Ch3 Freq",
        	converter=forms.float_converter(),
        )
        self.GridAdd(self._ch3_freq_text_box, 4, 0, 1, 1)
        _ch2_volume_sizer = wx.BoxSizer(wx.VERTICAL)
        self._ch2_volume_text_box = forms.text_box(
        	parent=self.GetWin(),
        	sizer=_ch2_volume_sizer,
        	value=self.ch2_volume,
        	callback=self.set_ch2_volume,
        	label="Volume",
        	converter=forms.float_converter(),
        	proportion=0,
        )
        self._ch2_volume_slider = forms.slider(
        	parent=self.GetWin(),
        	sizer=_ch2_volume_sizer,
        	value=self.ch2_volume,
        	callback=self.set_ch2_volume,
        	minimum=0,
        	maximum=10,
        	num_steps=20,
        	style=wx.SL_HORIZONTAL,
        	cast=float,
        	proportion=1,
        )
        self.GridAdd(_ch2_volume_sizer, 2, 2, 1, 1)
        _ch2_squelch_sizer = wx.BoxSizer(wx.VERTICAL)
        self._ch2_squelch_text_box = forms.text_box(
        	parent=self.GetWin(),
        	sizer=_ch2_squelch_sizer,
        	value=self.ch2_squelch,
        	callback=self.set_ch2_squelch,
        	label="Squelch",
        	converter=forms.float_converter(),
        	proportion=0,
        )
        self._ch2_squelch_slider = forms.slider(
        	parent=self.GetWin(),
        	sizer=_ch2_squelch_sizer,
        	value=self.ch2_squelch,
        	callback=self.set_ch2_squelch,
        	minimum=-70,
        	maximum=0,
        	num_steps=14,
        	style=wx.SL_HORIZONTAL,
        	cast=float,
        	proportion=1,
        )
        self.GridAdd(_ch2_squelch_sizer, 2, 3, 1, 1)
        self._ch2_mute_check_box = forms.check_box(
        	parent=self.GetWin(),
        	value=self.ch2_mute,
        	callback=self.set_ch2_mute,
        	label="Mute",
        	true=0,
        	false=1,
        )
        self.GridAdd(self._ch2_mute_check_box, 2, 5, 1, 1)
        self._ch2_modulation_chooser = forms.drop_down(
        	parent=self.GetWin(),
        	value=self.ch2_modulation,
        	callback=self.set_ch2_modulation,
        	label="Modulation",
        	choices=[0, 1,2],
        	labels=["DMR","NBFM","WBFM"],
        )
        self.GridAdd(self._ch2_modulation_chooser, 2, 1, 1, 1)
        self._ch2_invert_check_box = forms.check_box(
        	parent=self.GetWin(),
        	value=self.ch2_invert,
        	callback=self.set_ch2_invert,
        	label="Invert",
        	true=-1,
        	false=1,
        )
        self.GridAdd(self._ch2_invert_check_box, 2, 4, 1, 1)
        self._ch2_freq_text_box = forms.text_box(
        	parent=self.GetWin(),
        	value=self.ch2_freq,
        	callback=self.set_ch2_freq,
        	label="Ch2 Freq",
        	converter=forms.float_converter(),
        )
        self.GridAdd(self._ch2_freq_text_box, 2, 0, 1, 1)
        _ch1_volume_sizer = wx.BoxSizer(wx.VERTICAL)
        self._ch1_volume_text_box = forms.text_box(
        	parent=self.GetWin(),
        	sizer=_ch1_volume_sizer,
        	value=self.ch1_volume,
        	callback=self.set_ch1_volume,
        	label="Volume",
        	converter=forms.float_converter(),
        	proportion=0,
        )
        self._ch1_volume_slider = forms.slider(
        	parent=self.GetWin(),
        	sizer=_ch1_volume_sizer,
        	value=self.ch1_volume,
        	callback=self.set_ch1_volume,
        	minimum=0,
        	maximum=10,
        	num_steps=40,
        	style=wx.SL_HORIZONTAL,
        	cast=float,
        	proportion=1,
        )
        self.GridAdd(_ch1_volume_sizer, 0, 2, 1, 1)
        _ch1_squelch_sizer = wx.BoxSizer(wx.VERTICAL)
        self._ch1_squelch_text_box = forms.text_box(
        	parent=self.GetWin(),
        	sizer=_ch1_squelch_sizer,
        	value=self.ch1_squelch,
        	callback=self.set_ch1_squelch,
        	label="Squelch",
        	converter=forms.float_converter(),
        	proportion=0,
        )
        self._ch1_squelch_slider = forms.slider(
        	parent=self.GetWin(),
        	sizer=_ch1_squelch_sizer,
        	value=self.ch1_squelch,
        	callback=self.set_ch1_squelch,
        	minimum=-70,
        	maximum=0,
        	num_steps=14,
        	style=wx.SL_HORIZONTAL,
        	cast=float,
        	proportion=1,
        )
        self.GridAdd(_ch1_squelch_sizer, 0, 3, 1, 1)
        self._ch1_mute_check_box = forms.check_box(
        	parent=self.GetWin(),
        	value=self.ch1_mute,
        	callback=self.set_ch1_mute,
        	label="Mute",
        	true=0,
        	false=1,
        )
        self.GridAdd(self._ch1_mute_check_box, 0, 5, 1, 1)
        self._ch1_modulation_chooser = forms.drop_down(
        	parent=self.GetWin(),
        	value=self.ch1_modulation,
        	callback=self.set_ch1_modulation,
        	label="Modulation",
        	choices=[0, 1,2],
        	labels=["DMR","NBFM","WBFM"],
        )
        self.GridAdd(self._ch1_modulation_chooser, 0, 1, 1, 1)
        self._ch1_invert_check_box = forms.check_box(
        	parent=self.GetWin(),
        	value=self.ch1_invert,
        	callback=self.set_ch1_invert,
        	label="Invert",
        	true=-1,
        	false=1,
        )
        self.GridAdd(self._ch1_invert_check_box, 0, 4, 1, 1)
        self._ch1_freq_text_box = forms.text_box(
        	parent=self.GetWin(),
        	value=self.ch1_freq,
        	callback=self.set_ch1_freq,
        	label="Ch1 Freq",
        	converter=forms.float_converter(),
        )
        self.GridAdd(self._ch1_freq_text_box, 0, 0, 1, 1)
        self.wxgui_waterfallsink2_1 = waterfallsink2.waterfall_sink_c(
        	self.GetWin(),
        	baseband_freq=0,
        	dynamic_range=100,
        	ref_level=0,
        	ref_scale=2.0,
        	sample_rate=samp_rate,
        	fft_size=512,
        	fft_rate=15,
        	average=False,
        	avg_alpha=None,
        	title="Waterfall Plot",
        )
        self.GridAdd(self.wxgui_waterfallsink2_1.win, 6, 0, 15, 10)
        self.wxgui_fftsink2_0_0_0 = fftsink2.fft_sink_c(
        	self.tab.GetPage(2).GetWin(),
        	baseband_freq=0,
        	y_per_div=10,
        	y_divs=10,
        	ref_level=0,
        	ref_scale=2.0,
        	sample_rate=samp_rate,
        	fft_size=512,
        	fft_rate=15,
        	average=True,
        	avg_alpha=0.1333,
        	title="Channel 3",
        	peak_hold=False,
        )
        self.tab.GetPage(2).GridAdd(self.wxgui_fftsink2_0_0_0.win, 0, 0, 12, 7)
        self.wxgui_fftsink2_0_0 = fftsink2.fft_sink_c(
        	self.tab.GetPage(1).GetWin(),
        	baseband_freq=0,
        	y_per_div=10,
        	y_divs=10,
        	ref_level=0,
        	ref_scale=2.0,
        	sample_rate=samp_rate,
        	fft_size=512,
        	fft_rate=15,
        	average=True,
        	avg_alpha=0.1333,
        	title="Channel 2",
        	peak_hold=False,
        )
        self.tab.GetPage(1).GridAdd(self.wxgui_fftsink2_0_0.win, 0, 0, 12, 7)
        self.wxgui_fftsink2_0 = fftsink2.fft_sink_c(
        	self.tab.GetPage(0).GetWin(),
        	baseband_freq=0,
        	y_per_div=10,
        	y_divs=10,
        	ref_level=0,
        	ref_scale=2.0,
        	sample_rate=samp_rate,
        	fft_size=512,
        	fft_rate=15,
        	average=True,
        	avg_alpha=0.1333,
        	title="Channel 1",
        	peak_hold=False,
        )
        self.tab.GetPage(0).GridAdd(self.wxgui_fftsink2_0.win, 0, 0, 12, 7)
        self.wbfm_chain_0_0_0 = wbfm_chain()
        self.wbfm_chain_0_0 = wbfm_chain()
        self.wbfm_chain_0 = wbfm_chain()
        self.rtlsdr_source_0 = osmosdr.source( args="numchan=" + str(1) + " " + "" )
        self.rtlsdr_source_0.set_sample_rate(samp_rate)
        self.rtlsdr_source_0.set_center_freq(freq, 0)
        self.rtlsdr_source_0.set_freq_corr(0, 0)
        self.rtlsdr_source_0.set_dc_offset_mode(0, 0)
        self.rtlsdr_source_0.set_iq_balance_mode(0, 0)
        self.rtlsdr_source_0.set_gain_mode(False, 0)
        self.rtlsdr_source_0.set_gain(10, 0)
        self.rtlsdr_source_0.set_if_gain(20, 0)
        self.rtlsdr_source_0.set_bb_gain(20, 0)
        self.rtlsdr_source_0.set_antenna("", 0)
        self.rtlsdr_source_0.set_bandwidth(0, 0)
          
        self.nbfm_chain_1_0 = nbfm_chain()
        self.nbfm_chain_1 = nbfm_chain()
        self.nbfm_chain_0 = nbfm_chain()
        self.freq_xlating_fft_filter_ccc_0_0_0 = filter.freq_xlating_fft_filter_ccc(1, (firdes.low_pass(1,samp_rate,200000,10000)), ch3_freq - freq, samp_rate)
        self.freq_xlating_fft_filter_ccc_0_0_0.set_nthreads(1)
        self.freq_xlating_fft_filter_ccc_0_0_0.declare_sample_delay(0)
        self.freq_xlating_fft_filter_ccc_0_0 = filter.freq_xlating_fft_filter_ccc(1, (firdes.low_pass(1,samp_rate,200000,10000)), ch2_freq - freq, samp_rate)
        self.freq_xlating_fft_filter_ccc_0_0.set_nthreads(1)
        self.freq_xlating_fft_filter_ccc_0_0.declare_sample_delay(0)
        self.freq_xlating_fft_filter_ccc_0 = filter.freq_xlating_fft_filter_ccc(1, (firdes.low_pass(1,samp_rate,200000,10000)), ch1_freq - freq, samp_rate)
        self.freq_xlating_fft_filter_ccc_0.set_nthreads(1)
        self.freq_xlating_fft_filter_ccc_0.declare_sample_delay(0)
        self.dsd_chain_1_0 = dsd_chain()
        self.dsd_chain_1 = dsd_chain()
        self.dsd_chain_0 = dsd_chain()
        self.blocks_multiply_const_vxx_2_0 = blocks.multiply_const_vff((ch3_invert * ch3_mute, ))
        self.blocks_multiply_const_vxx_2 = blocks.multiply_const_vff((ch2_invert * ch2_mute, ))
        self.blocks_multiply_const_vxx_1 = blocks.multiply_const_vff((ch1_invert * ch1_mute, ))
        self.blocks_multiply_const_vxx_0_0_0 = blocks.multiply_const_vff((ch3_volume, ))
        self.blocks_multiply_const_vxx_0_0 = blocks.multiply_const_vff((ch2_volume, ))
        self.blocks_multiply_const_vxx_0 = blocks.multiply_const_vff((ch1_volume, ))
        self.blks2_selector_0_1_0 = grc_blks2.selector(
        	item_size=gr.sizeof_gr_complex*1,
        	num_inputs=1,
        	num_outputs=3,
        	input_index=0,
        	output_index=ch3_modulation,
        )
        self.blks2_selector_0_1 = grc_blks2.selector(
        	item_size=gr.sizeof_gr_complex*1,
        	num_inputs=1,
        	num_outputs=3,
        	input_index=0,
        	output_index=ch2_modulation,
        )
        self.blks2_selector_0_0_0_0 = grc_blks2.selector(
        	item_size=gr.sizeof_float*1,
        	num_inputs=3,
        	num_outputs=1,
        	input_index=ch3_modulation,
        	output_index=0,
        )
        self.blks2_selector_0_0_0 = grc_blks2.selector(
        	item_size=gr.sizeof_float*1,
        	num_inputs=3,
        	num_outputs=1,
        	input_index=ch2_modulation,
        	output_index=0,
        )
        self.blks2_selector_0_0 = grc_blks2.selector(
        	item_size=gr.sizeof_float*1,
        	num_inputs=3,
        	num_outputs=1,
        	input_index=ch1_modulation,
        	output_index=0,
        )
        self.blks2_selector_0 = grc_blks2.selector(
        	item_size=gr.sizeof_gr_complex*1,
        	num_inputs=1,
        	num_outputs=3,
        	input_index=0,
        	output_index=ch1_modulation,
        )
        self.audio_sink_0_0_0 = audio.sink(48000, "", True)
        self.audio_sink_0_0 = audio.sink(48000, "", True)
        self.audio_sink_0 = audio.sink(48000, "", True)
        self.analog_pwr_squelch_xx_0_0_0_0 = analog.pwr_squelch_cc(ch3_squelch, 1e-4, 0, True)
        self.analog_pwr_squelch_xx_0_0_0 = analog.pwr_squelch_cc(ch2_squelch, 1e-4, 0, True)
        self.analog_pwr_squelch_xx_0_0 = analog.pwr_squelch_cc(ch1_squelch, 1e-4, 0, True)

        ##################################################
        # Connections
        ##################################################
        self.connect((self.analog_pwr_squelch_xx_0_0, 0), (self.blks2_selector_0, 0))    
        self.connect((self.analog_pwr_squelch_xx_0_0_0, 0), (self.blks2_selector_0_1, 0))    
        self.connect((self.analog_pwr_squelch_xx_0_0_0_0, 0), (self.blks2_selector_0_1_0, 0))    
        self.connect((self.blks2_selector_0, 0), (self.dsd_chain_0, 0))    
        self.connect((self.blks2_selector_0, 1), (self.nbfm_chain_0, 0))    
        self.connect((self.blks2_selector_0, 2), (self.wbfm_chain_0, 0))    
        self.connect((self.blks2_selector_0_0, 0), (self.blocks_multiply_const_vxx_0, 0))    
        self.connect((self.blks2_selector_0_0_0, 0), (self.blocks_multiply_const_vxx_0_0, 0))    
        self.connect((self.blks2_selector_0_0_0_0, 0), (self.blocks_multiply_const_vxx_0_0_0, 0))    
        self.connect((self.blks2_selector_0_1, 0), (self.dsd_chain_1, 0))    
        self.connect((self.blks2_selector_0_1, 1), (self.nbfm_chain_1, 0))    
        self.connect((self.blks2_selector_0_1, 2), (self.wbfm_chain_0_0, 0))    
        self.connect((self.blks2_selector_0_1_0, 0), (self.dsd_chain_1_0, 0))    
        self.connect((self.blks2_selector_0_1_0, 1), (self.nbfm_chain_1_0, 0))    
        self.connect((self.blks2_selector_0_1_0, 2), (self.wbfm_chain_0_0_0, 0))    
        self.connect((self.blocks_multiply_const_vxx_0, 0), (self.blocks_multiply_const_vxx_1, 0))    
        self.connect((self.blocks_multiply_const_vxx_0_0, 0), (self.blocks_multiply_const_vxx_2, 0))    
        self.connect((self.blocks_multiply_const_vxx_0_0_0, 0), (self.blocks_multiply_const_vxx_2_0, 0))    
        self.connect((self.blocks_multiply_const_vxx_1, 0), (self.audio_sink_0, 0))    
        self.connect((self.blocks_multiply_const_vxx_2, 0), (self.audio_sink_0_0, 0))    
        self.connect((self.blocks_multiply_const_vxx_2_0, 0), (self.audio_sink_0_0_0, 0))    
        self.connect((self.dsd_chain_0, 0), (self.blks2_selector_0_0, 0))    
        self.connect((self.dsd_chain_1, 0), (self.blks2_selector_0_0_0, 0))    
        self.connect((self.dsd_chain_1_0, 0), (self.blks2_selector_0_0_0_0, 0))    
        self.connect((self.freq_xlating_fft_filter_ccc_0, 0), (self.analog_pwr_squelch_xx_0_0, 0))    
        self.connect((self.freq_xlating_fft_filter_ccc_0, 0), (self.wxgui_fftsink2_0, 0))    
        self.connect((self.freq_xlating_fft_filter_ccc_0_0, 0), (self.analog_pwr_squelch_xx_0_0_0, 0))    
        self.connect((self.freq_xlating_fft_filter_ccc_0_0, 0), (self.wxgui_fftsink2_0_0, 0))    
        self.connect((self.freq_xlating_fft_filter_ccc_0_0_0, 0), (self.analog_pwr_squelch_xx_0_0_0_0, 0))    
        self.connect((self.freq_xlating_fft_filter_ccc_0_0_0, 0), (self.wxgui_fftsink2_0_0_0, 0))    
        self.connect((self.nbfm_chain_0, 0), (self.blks2_selector_0_0, 1))    
        self.connect((self.nbfm_chain_1, 0), (self.blks2_selector_0_0_0, 1))    
        self.connect((self.nbfm_chain_1_0, 0), (self.blks2_selector_0_0_0_0, 1))    
        self.connect((self.rtlsdr_source_0, 0), (self.freq_xlating_fft_filter_ccc_0, 0))    
        self.connect((self.rtlsdr_source_0, 0), (self.freq_xlating_fft_filter_ccc_0_0, 0))    
        self.connect((self.rtlsdr_source_0, 0), (self.freq_xlating_fft_filter_ccc_0_0_0, 0))    
        self.connect((self.rtlsdr_source_0, 0), (self.wxgui_waterfallsink2_1, 0))    
        self.connect((self.wbfm_chain_0, 0), (self.blks2_selector_0_0, 2))    
        self.connect((self.wbfm_chain_0_0, 0), (self.blks2_selector_0_0_0, 2))    
        self.connect((self.wbfm_chain_0_0_0, 0), (self.blks2_selector_0_0_0_0, 2))    
Esempio n. 33
0
    def __init__(self, principal_gui, rx_callback, options):
        gr.hier_block2.__init__(self, "receive_path",
                                gr.io_signature(0,0,0), # the 1,1 indicate the minimum, maximum  stream in input
                                gr.io_signature(0,0,0))                    # the 0,0 indicate the minimum, maximum  stream in output
        
        #local setup usrp source creat self.usrp source 
        self._setup_usrp_source(options)
        
        options = copy.copy(options) # Make copy of the received options
        
        self._verbose           = options.verbose
        self._bitrate           = options.data_rate            # The bit rate transmission
        self._samples_per_symbol= options.samples_per_symbol # samples/sample
        
        self._rx_callback   = rx_callback        #This callback is fired (declanche) when there's packet is available
        self.demodulator    = bpsk_demodulator(principal_gui, options)      #The demodulator used 
        
        #Designe filter to get actual channel we want
        sw_decim = 1
        
        #Create the low pass filter 
        chan_coeffs = filter.firdes.low_pass (1.0,                                  #gain
                                          sw_decim * self._samples_per_symbol,  #sampling rate
                                          1.0,                                  #midpoint of trans band
                                          0.5,                                  #width of trans band
                                          filter.firdes.WIN_HAMMING)                #filter type
        self.channel_filter = filter.fft_filter_ccc(sw_decim, chan_coeffs)
        

        self.packet_receiver = ieee_pkt_receiver.ieee_pkt_receiver_868_915(self, 
                                                                   gui = principal_gui,
                                                                   demodulator = self.demodulator,
                                                                   callback = rx_callback,
                                                                   sps = self._samples_per_symbol,
                                                                   symbol_rate = self._bitrate,
                                                                   threshold = -1) 
            
        #Carrier Sensing Block (ecoute du canal)
        alpha = 0.001
        # Carrier Sensing with dB, will have to adjust
        thresh = 30 
        #construct analyser of carrier (c'est un sink) 
#        self.probe = gr.probe_avg_mag_sqrd_c(thresh, alpha)
        
        #display information about the setup
        if self._verbose:
            self._print_verbage()
        
        #self.squelch = gr.pwr_squelch_cc(50, 1, 0, True)
        #connect the input block to channel filter
        #connect the blocks with usrp, the  self.usrp is created in _setup_usrp_source
        self.squelch = analog.pwr_squelch_cc(50, 1, 0, True)
        
#        self.wxgui_constellationsink2_0_0 = constsink_gl.const_sink_c(
#            principal_gui.GetWin(),
#            title="Constellation Plot",
#            sample_rate= options.samp_rate,
#            frame_rate=5,
#            const_size=2048,
#            M=2,
#            theta=0,
#            loop_bw=6.28/100.0,
#            fmax=0.05,
#            mu=0.5,
#            gain_mu=0.001,
#            symbol_rate=options.samp_rate/options.samples_per_symbol,
#            omega_limit=0.0001,
#        )
#        principal_gui.Add(self.wxgui_constellationsink2_0_0.win)
        '''For stream of bits'''
#        self.wxgui_fftsink2_0 = fftsink2.fft_sink_c(
#            principal_gui.GetWin(),
#            baseband_freq=options.freq,
#            y_per_div=10,
#            y_divs=10,
#            ref_level=10,
#            ref_scale=2.0,
#            sample_rate= 0.5e6,
#            fft_size=1024,
#            fft_rate=30,
#            average=False,
#            avg_alpha=None,
#            title="FFT Plot",
#            peak_hold=False,
#        )
#        principal_gui.Add(self.wxgui_fftsink2_0.win)
        #self.connect(self.u, self.demodulator, self.wxgui_fftsink2_0)
        '''End for stream of bits'''
        
        #Reception of packets 
        self.connect(self.u, self.packet_receiver)
Esempio n. 34
0
    def __init__(self, argv):
        gr.top_block.__init__(self)
        parser=OptionParser(option_class=eng_option)
        parser.add_option("-a", "--args", type="string", default="",
                          help="UHD device address args [default=%default]")
        parser.add_option("", "--dev", type="string", default=0,
	                  help="Device (rtl=0 or something")
        parser.add_option("-f", "--freqset", type="string", default="",
                          help="Frequency set key=freq,key=freq,... in kHz")
        parser.add_option("-m", "--mode", type="string", default="fm",
                          help="Mode (am or fm)")
        parser.add_option("-g", "--gain", type="eng_float", default=30.0,
                          help="set gain in dB (default is maximum)")
        parser.add_option("-V", "--volume", type="eng_float", default=1.0,
                          help="set volume (default is midpoint)")
        parser.add_option("-i", "--icecast", type="string", default="",
                          help="Icecast host:port")
        parser.add_option("-p", "--icepw", type="string", default="127.0.0.1:8000",
                          help="Icecast source password")
        parser.add_option("-O", "--audio-output", type="string", default="",
                          help="pcm device name.  E.g., hw:0,0 or surround51 or /dev/dsp")

        (options, args) = parser.parse_args()
        if len(args) != 0:
            parser.print_help()
            sys.exit(1)

        if options.volume is None:
            options.volume = 0.8
            
        self.vol = options.volume
        self.freqs = self.parse_freqset(options.freqset)
        
        self.freq_corr = 0
        self.rf_gain = options.gain # around 20
        self.if_gain = 7
        self.bb_gain = 10.0
        self.bandwidth = 2400000
        self.channel_bw = 10000
        
        freq_min = min(self.freqs.values())
        freq_max = max(self.freqs.values())
        
        print "Frequencies:"
        for k in self.freqs:
            print "  %s: %.3f MHz" % (k, self.freqs[k]/1000000.0)
        
        required_bw = freq_max - freq_min
        
        print "Required bandwidth: %.3f MHz" % (required_bw/1000000.0)
        if required_bw > self.bandwidth:
            print "Required bandwidth %.3f MHz larger than maximum BW %.3f MHz" % (required_bw/1000000, self.bandwidth/100000)
            return None
        
        # offset center frequency so that it's not on a monitored frequency
        self.center_freq = freq_min + (required_bw/2)
        for f in self.freqs.values():
            if abs(f - self.center_freq) < self.channel_bw:
                self.center_freq += self.channel_bw
            
        print "Center frequency: %.3f MHz" % self.center_freq
        
        print ""
        # build graph
        arg_s = options.dev #"rtl=%d" % options.dev
        u = self.u = osmosdr.source(args=arg_s)
        
        u.set_center_freq(self.center_freq, 0)
        u.set_freq_corr(self.freq_corr, 0)
        u.set_dc_offset_mode(0, 0) # 0-2: Off-Manual-Automatic
        u.set_iq_balance_mode(0, 0) # 0-2: Off-Manual-Automatic
        u.set_gain_mode(False, 0) # 0-1: Manual, Automatic
        u.set_gain(self.rf_gain, 0)
        u.set_if_gain(self.if_gain, 0)
        u.set_bb_gain(self.bb_gain, 0)
        u.set_antenna("all", 0)
        u.set_sample_rate(1024e3*2)
        u.set_bandwidth(self.bandwidth, 0)
        
        dev_rate = self.u.get_sample_rate()
        demod_rate = 64e3
        audio_rate = 32e3
        chanfilt_decim = int(dev_rate // demod_rate)
        audio_decim = int(demod_rate // audio_rate)
        
        print "Device rate %d, bandwidth %.3f MHz" % (dev_rate, self.bandwidth / 1000000.0)
        print "Demod rate %d, audio rate %d" % (demod_rate, audio_rate)
        
        if options.mode == 'am':
            chan_filt_coeffs = filter.firdes.low_pass_2(1,          # gain
                                                    dev_rate,  # sampling rate
                                                    8e3,        # passband cutoff
                                                    2e3,        # transition bw
                                                    60)         # stopband attenuation
        else:
            print "FM filter"
            chan_filt_coeffs = filter.firdes.low_pass_2(1,          # gain
                                                    dev_rate,  # sampling rate
                                                    16e3,        # passband cutoff
                                                    3e3,        # transition bw
                                                    60)         # stopband attenuation
        
        audio_filt_coeffs = filter.firdes.low_pass_2(1,          # gain
                                                     demod_rate, # sampling rate
                                                     7e3,        # passband cutoff
                                                     2e3,        # transition bw
                                                     60)         # stopband attenuation
        demodulators = []
        
        for k in self.freqs:
            f = self.freqs[k]
            print "Setting up %s: %.3f MHz" % (k, f / 1000000.0)
            
            if_freq = f - self.center_freq
            chan_filt = filter.freq_xlating_fir_filter_ccf(chanfilt_decim,
                                                                  chan_filt_coeffs,
                                                                  if_freq,
                                                                  dev_rate)
            
            agc = analog.agc_cc(0.1, 1, 1)
            
            if options.mode == 'am':
                demod = blocks.complex_to_mag()
                
                squelch = analog.standard_squelch(dev_rate/10)
                sq_range = squelch.squelch_range()
                sq = (sq_range[0] + sq_range[1])/2
                sq = 0.7
                print "Squelch: range %.1f ... %.1f, using %.2f" % (sq_range[0], sq_range[1], sq)
                squelch.set_threshold(sq)
                
                audio_filt = filter.fir_filter_fff(audio_decim, audio_filt_coeffs)
                
                self.connect(chan_filt, agc, demod, squelch, audio_filt)
                last_block = audio_filt
            else:
                print "FM demod"
                demod = analog.demod_20k0f3e_cf(demod_rate, audio_decim)
                
                squelch = analog.pwr_squelch_cc(-50.0,    # Power threshold
                                            125.0/demod_rate,      # Time constant
                                            int(demod_rate/20),       # 50ms rise/fall
                                            False)                 # Zero, not gate output
                
                self.connect(chan_filt, squelch, agc, demod)
                last_block = demod
            
            demodulators.append([chan_filt, last_block])
            
            if options.icecast:
                # set up a file sink
                fname = self.setup_upstream_pipe(k, options)
                float_to_int = blocks.float_to_short(scale=7500.0)
                file_sink = blocks.file_sink(gr.sizeof_short, fname, append=True)
                self.connect(last_block, float_to_int, file_sink)
        
        self.adder = None
        if options.audio_output != "":
            self.volume_control = blocks.multiply_const_ff(self.vol)
            
            self.adder = blocks.add_ff(1)
            
            # sound card as final sink
            self.audio_sink = audio.sink(int (audio_rate),
                                          options.audio_output,
                                          False)  # ok_to_block

        # now wire it all together
        ch = 0
        for d in demodulators:
            self.connect(self.u, d[0])
            if self.adder:
                self.connect(d[1], (self.adder, ch))
            ch += 1
        
        if self.adder:
            self.connect(self.adder, self.volume_control, self.audio_sink)

        if options.gain is None:
            g = self.u.get_gain_range()
            # if no gain was specified, use the mid gain
            options.gain = (g.start() + g.stop())/2.0
Esempio n. 35
0
    def __init__(self, samp_rate=4E6, audio_rate=8000, record=True):
        gr.hier_block2.__init__(self, "TunerDemodNBFM",
                                gr.io_signature(1, 1, gr.sizeof_gr_complex),
                                gr.io_signature(1, 1, gr.sizeof_float))

        # Default values
        self.center_freq = 0
        squelch_db = -60
        self.quad_demod_gain = 0.050
        self.file_name = "/dev/null"
        self.record = record

        # Decimation values for four stages of decimation
        decims = (5, int(samp_rate/1E6))

        # Low pass filter taps for decimation by 5
        low_pass_filter_taps_0 = \
            grfilter.firdes_low_pass(1, 1, 0.090, 0.010,
                                     grfilter.firdes.WIN_HAMMING)

        # Frequency translating FIR filter decimating by 5
        self.freq_xlating_fir_filter_ccc = \
            grfilter.freq_xlating_fir_filter_ccc(decims[0],
                                                 low_pass_filter_taps_0,
                                                 self.center_freq, samp_rate)

        # FIR filter decimating by 5
        fir_filter_ccc_0 = grfilter.fir_filter_ccc(decims[0],
                                                   low_pass_filter_taps_0)

        # Low pass filter taps for decimation from samp_rate/25 to 40-79.9 ksps
        # In other words, decimation by int(samp_rate/1E6)
        # 12.5 kHz cutoff for NBFM channel bandwidth
        low_pass_filter_taps_1 = grfilter.firdes_low_pass(
            1, samp_rate/decims[0]**2, 12.5E3, 1E3, grfilter.firdes.WIN_HAMMING)

        # FIR filter decimation by int(samp_rate/1E6)
        fir_filter_ccc_1 = grfilter.fir_filter_ccc(decims[1],
                                                   low_pass_filter_taps_1)

        # Non blocking power squelch
        self.analog_pwr_squelch_cc = analog.pwr_squelch_cc(squelch_db,
                                                           1e-1, 0, False)

        # Quadrature demod with gain set for decent audio
        # The gain will be later multiplied by the 0 dB normalized volume
        self.analog_quadrature_demod_cf = \
            analog.quadrature_demod_cf(self.quad_demod_gain)

        # 3.5 kHz cutoff for audio bandwidth
        low_pass_filter_taps_2 = grfilter.firdes_low_pass(1,\
                        samp_rate/(decims[1] * decims[0]**2),\
                        3.5E3, 500, grfilter.firdes.WIN_HAMMING)

        # FIR filter decimating by 5 from 40-79.9 ksps to 8-15.98 ksps
        fir_filter_fff_0 = grfilter.fir_filter_fff(decims[0],
                                                   low_pass_filter_taps_2)

        # Polyphase resampler allows arbitary RF sample rates
        # Takes 8-15.98 ksps to a constant 8 ksps for audio
        pfb_resamp = audio_rate/float(samp_rate/(decims[1] * decims[0]**3))
        pfb_arb_resampler_fff = pfb.arb_resampler_fff(pfb_resamp, taps=None,
                                                      flt_size=32)

        # Connect the blocks for the demod
        self.connect(self, self.freq_xlating_fir_filter_ccc)
        self.connect(self.freq_xlating_fir_filter_ccc, fir_filter_ccc_0)
        self.connect(fir_filter_ccc_0, fir_filter_ccc_1)
        self.connect(fir_filter_ccc_1, self.analog_pwr_squelch_cc)
        self.connect(self.analog_pwr_squelch_cc,
                     self.analog_quadrature_demod_cf)
        self.connect(self.analog_quadrature_demod_cf, fir_filter_fff_0)
        self.connect(fir_filter_fff_0, pfb_arb_resampler_fff)
        self.connect(pfb_arb_resampler_fff, self)

        # Need to set this to a very low value of -200 since it is after demod
        # Only want it to gate when the previuos squelch has gone to zero
        analog_pwr_squelch_ff = analog.pwr_squelch_ff(-200, 1e-1, 0, True)

        # File sink with single channel and 8 bits/sample
        self.blocks_wavfile_sink = blocks.wavfile_sink(self.file_name, 1,
                                                       audio_rate, 8)

        # Connect the blocks for recording
        self.connect(pfb_arb_resampler_fff, analog_pwr_squelch_ff)
        self.connect(analog_pwr_squelch_ff, self.blocks_wavfile_sink)
Esempio n. 36
0
    def __init__(self, samp_rate=4E6, audio_rate=8000, record=True):
        gr.hier_block2.__init__(self, "TunerDemod",
                                gr.io_signature(1, 1, gr.sizeof_gr_complex),
                                gr.io_signature(1, 1, gr.sizeof_float))

        # Default values
        self.center_freq = 0
        squelch_db = -60
        self.quad_demod_gain = 0.050
        self.file_name = "/dev/null"
        self.record = record

        # Decimation values for four stages of decimation
        decims = (5, int(samp_rate / 1E6))

        # Low pass filter taps for decimation by 5
        low_pass_filter_taps_0 = \
            grfilter.firdes_low_pass(1, 1, 0.090, 0.010,
                                     grfilter.firdes.WIN_HAMMING)

        # Frequency translating FIR filter decimating by 5
        self.freq_xlating_fir_filter_ccc = \
            grfilter.freq_xlating_fir_filter_ccc(decims[0],
                                                 low_pass_filter_taps_0,
                                                 self.center_freq, samp_rate)

        # FIR filter decimating by 5
        fir_filter_ccc_0 = grfilter.fir_filter_ccc(decims[0],
                                                   low_pass_filter_taps_0)

        # Low pass filter taps for decimation from samp_rate/25 to 40-79.9 ksps
        # In other words, decimation by int(samp_rate/1E6)
        # 12.5 kHz cutoff for NBFM channel bandwidth
        low_pass_filter_taps_1 = grfilter.firdes_low_pass(
            1, samp_rate / decims[0]**2, 12.5E3, 1E3,
            grfilter.firdes.WIN_HAMMING)

        # FIR filter decimation by int(samp_rate/1E6)
        fir_filter_ccc_1 = grfilter.fir_filter_ccc(decims[1],
                                                   low_pass_filter_taps_1)

        # Non blocking power squelch
        self.analog_pwr_squelch_cc = analog.pwr_squelch_cc(
            squelch_db, 1e-1, 0, False)

        # Quadrature demod with gain set for decent audio
        # This will be later multiplied by the volume
        self.analog_quadrature_demod_cf = \
            analog.quadrature_demod_cf(self.quad_demod_gain)

        # 3.5 kHz cutoff for audio bandwidth
        low_pass_filter_taps_2 = grfilter.firdes_low_pass(1,\
                        samp_rate/(decims[1] * decims[0]**2),\
                        3.5E3, 500, grfilter.firdes.WIN_HAMMING)

        # FIR filter decimating by 5 from 40-79.9 ksps to 8-15.98 ksps
        fir_filter_fff_0 = grfilter.fir_filter_fff(decims[0],
                                                   low_pass_filter_taps_2)

        # Polyphase resampler allows arbitary RF sample rates
        # Takes 8-15.98 ksps to a constant 8 ksps for audio
        pfb_resamp = audio_rate / float(samp_rate / (decims[1] * decims[0]**3))
        pfb_arb_resampler_fff = pfb.arb_resampler_fff(pfb_resamp,
                                                      taps=None,
                                                      flt_size=32)

        # Connect the blocks for the demod
        self.connect(self, self.freq_xlating_fir_filter_ccc)
        self.connect(self.freq_xlating_fir_filter_ccc, fir_filter_ccc_0)
        self.connect(fir_filter_ccc_0, fir_filter_ccc_1)
        self.connect(fir_filter_ccc_1, self.analog_pwr_squelch_cc)
        self.connect(self.analog_pwr_squelch_cc,
                     self.analog_quadrature_demod_cf)
        self.connect(self.analog_quadrature_demod_cf, fir_filter_fff_0)
        self.connect(fir_filter_fff_0, pfb_arb_resampler_fff)
        self.connect(pfb_arb_resampler_fff, self)

        # Need to set this to a very low value of -200 since it is after demod
        # Only want it to gate when the previuos squelch has gone to zero
        analog_pwr_squelch_ff = analog.pwr_squelch_ff(-200, 1e-1, 0, True)

        # File sink with single channel and 8 bits/sample
        self.blocks_wavfile_sink = blocks.wavfile_sink(self.file_name, 1,
                                                       audio_rate, 8)

        # Connect the blocks for recording
        self.connect(pfb_arb_resampler_fff, analog_pwr_squelch_ff)
        self.connect(analog_pwr_squelch_ff, self.blocks_wavfile_sink)
    def __init__(self):
        gr.top_block.__init__(self, "Top Block")

        ##################################################
        # Variables
        ##################################################
        self.audio_rate = audio_rate = int(48e3)
        self.rtl_rate = rtl_rate = int(240e3)
        self.out_intermediary_rate = out_intermediary_rate = audio_rate*4
        self.out_gain = out_gain = .25
        self.out_frequency_offset = out_frequency_offset = -50e3
        self.out_frequency = out_frequency = 145.521e6
        self.out_audio_inverted = out_audio_inverted = True
        self.in_frequency_offset = in_frequency_offset = 0
        self.in_frequency = in_frequency = 145.551e6
        self.in_final_gain = in_final_gain = 0.5
        self.in_decimation_factor = in_decimation_factor = 8
        self.in_audio_inverted = in_audio_inverted = True
        self.hackrf_rate = hackrf_rate = 2e6
        self.dstar_bandwidth = dstar_bandwidth = 6.5e3

        ##################################################
        # Blocks
        ##################################################
        self.rtlsdr_source_0 = osmosdr.source( args="numchan=" + str(1) + " " + "" )
        self.rtlsdr_source_0.set_sample_rate(rtl_rate)
        self.rtlsdr_source_0.set_center_freq(in_frequency+in_frequency_offset, 0)
        self.rtlsdr_source_0.set_freq_corr(69, 0)
        self.rtlsdr_source_0.set_dc_offset_mode(0, 0)
        self.rtlsdr_source_0.set_iq_balance_mode(0, 0)
        self.rtlsdr_source_0.set_gain_mode(False, 0)
        self.rtlsdr_source_0.set_gain(10, 0)
        self.rtlsdr_source_0.set_if_gain(20, 0)
        self.rtlsdr_source_0.set_bb_gain(20, 0)
        self.rtlsdr_source_0.set_antenna("", 0)
        self.rtlsdr_source_0.set_bandwidth(0, 0)
          
        self.rational_resampler_xxx_3 = filter.rational_resampler_ccc(
                interpolation=int(hackrf_rate),
                decimation=out_intermediary_rate,
                taps=None,
                fractional_bw=None,
        )
        self.osmosdr_sink_0 = osmosdr.sink( args="numchan=" + str(1) + " " + "" )
        self.osmosdr_sink_0.set_sample_rate(hackrf_rate)
        self.osmosdr_sink_0.set_center_freq(out_frequency-out_frequency_offset, 0)
        self.osmosdr_sink_0.set_freq_corr(4, 0)
        self.osmosdr_sink_0.set_gain(14, 0)
        self.osmosdr_sink_0.set_if_gain(0, 0)
        self.osmosdr_sink_0.set_bb_gain(0, 0)
        self.osmosdr_sink_0.set_antenna("0", 0)
        self.osmosdr_sink_0.set_bandwidth(100e3, 0)
          
        self.low_pass_filter_1 = filter.fir_filter_ccf(5, firdes.low_pass(
        	1, rtl_rate, dstar_bandwidth*2, 500, firdes.WIN_HAMMING, 6.76))
        self.low_pass_filter_0 = filter.fir_filter_fff(1, firdes.low_pass(
        	1, audio_rate, dstar_bandwidth*2, 200, firdes.WIN_KAISER, 6.76))
        self.freq_xlating_fft_filter_ccc_0 = filter.freq_xlating_fft_filter_ccc(1, (1, ), 0-out_frequency_offset, out_intermediary_rate)
        self.freq_xlating_fft_filter_ccc_0.set_nthreads(1)
        self.freq_xlating_fft_filter_ccc_0.declare_sample_delay(0)
        self.dc_blocker_xx_0 = filter.dc_blocker_ff(128, True)
        self.blocks_multiply_const_vxx_2 = blocks.multiply_const_vff(((-1 if out_audio_inverted else 1)*out_gain, ))
        self.blocks_multiply_const_vxx_1 = blocks.multiply_const_vff((0-in_final_gain if in_audio_inverted else in_final_gain, ))
        self.audio_source_0 = audio.source(audio_rate, "hw:10,1", True)
        self.audio_sink_1 = audio.sink(audio_rate, "plughw:11,0", True)
        self.analog_pwr_squelch_xx_1 = analog.pwr_squelch_cc(-30, 1, 1, False)
        self.analog_pwr_squelch_xx_0 = analog.pwr_squelch_ff(-60, 1, 1, True)
        self.analog_nbfm_tx_0 = analog.nbfm_tx(
        	audio_rate=int(audio_rate),
        	quad_rate=int(out_intermediary_rate),
        	tau=0,
        	max_dev=dstar_bandwidth,
        )
        self.analog_nbfm_rx_0 = analog.nbfm_rx(
        	audio_rate=audio_rate,
        	quad_rate=audio_rate,
        	tau=0.000000000000000000001,
        	max_dev=dstar_bandwidth*2,
        )

        ##################################################
        # Connections
        ##################################################
        self.connect((self.analog_nbfm_rx_0, 0), (self.blocks_multiply_const_vxx_1, 0))    
        self.connect((self.analog_nbfm_tx_0, 0), (self.freq_xlating_fft_filter_ccc_0, 0))    
        self.connect((self.analog_pwr_squelch_xx_0, 0), (self.blocks_multiply_const_vxx_2, 0))    
        self.connect((self.analog_pwr_squelch_xx_1, 0), (self.analog_nbfm_rx_0, 0))    
        self.connect((self.audio_source_0, 0), (self.dc_blocker_xx_0, 0))    
        self.connect((self.blocks_multiply_const_vxx_1, 0), (self.audio_sink_1, 0))    
        self.connect((self.blocks_multiply_const_vxx_2, 0), (self.low_pass_filter_0, 0))    
        self.connect((self.dc_blocker_xx_0, 0), (self.analog_pwr_squelch_xx_0, 0))    
        self.connect((self.freq_xlating_fft_filter_ccc_0, 0), (self.rational_resampler_xxx_3, 0))    
        self.connect((self.low_pass_filter_0, 0), (self.analog_nbfm_tx_0, 0))    
        self.connect((self.low_pass_filter_1, 0), (self.analog_pwr_squelch_xx_1, 0))    
        self.connect((self.rational_resampler_xxx_3, 0), (self.osmosdr_sink_0, 0))    
        self.connect((self.rtlsdr_source_0, 0), (self.low_pass_filter_1, 0))    
Esempio n. 38
0
    def __init__(self):
        gr.top_block.__init__(self, "Lang Rx")

        ##################################################
        # Variables
        ##################################################
        plutoip = os.environ.get('PLUTO_IP')
        if plutoip == None:
            plutoip = 'pluto.local'
        plutoip = 'ip:' + plutoip
        self.SQL = SQL = 50
        self.RxOffset = RxOffset = 0
        self.Mute = Mute = False
        self.Mode = Mode = 3
        self.Filt_Low = Filt_Low = 300
        self.Filt_High = Filt_High = 3000
        self.FFTEn = FFTEn = 0
        self.AFGain = AFGain = 20

        ##################################################
        # Blocks
        ##################################################
        self.pluto_source_0 = iio.pluto_source(plutoip, 1000000000, 528000,
                                               2000000, 0x800, True, True,
                                               True, "slow_attack", 64.0, '',
                                               True)
        self.logpwrfft_x_0 = logpwrfft.logpwrfft_c(
            sample_rate=48000,
            fft_size=512,
            ref_scale=2,
            frame_rate=15,
            avg_alpha=0.9,
            average=True,
        )
        self.freq_xlating_fir_filter_xxx_0 = filter.freq_xlating_fir_filter_ccc(
            11, (firdes.low_pass(1, 529200, 23000, 2000)), RxOffset, 528000)
        self.blocks_udp_sink_0 = blocks.udp_sink(gr.sizeof_float * 512,
                                                 '127.0.0.1', 7373, 1472,
                                                 False)
        self.blocks_null_sink_0 = blocks.null_sink(gr.sizeof_float * 512)
        self.blocks_multiply_const_vxx_2_1_0 = blocks.multiply_const_vff(
            (1.0 + (Mode == 5), ))
        self.blocks_multiply_const_vxx_2_1 = blocks.multiply_const_vff(
            (Mode == 5, ))
        self.blocks_multiply_const_vxx_2_0 = blocks.multiply_const_vff(
            ((Mode == 4) * 0.2, ))
        self.blocks_multiply_const_vxx_2 = blocks.multiply_const_vff(
            (Mode < 4, ))
        self.blocks_multiply_const_vxx_1 = blocks.multiply_const_vff(
            ((AFGain / 100.0) * (not Mute), ))
        self.blocks_float_to_complex_0 = blocks.float_to_complex(1)
        self.blocks_complex_to_real_0_0 = blocks.complex_to_real(1)
        self.blocks_complex_to_real_0 = blocks.complex_to_real(1)
        self.blocks_complex_to_mag_0 = blocks.complex_to_mag(1)
        self.blocks_add_xx_1_0 = blocks.add_vff(1)
        self.blocks_add_xx_1 = blocks.add_vff(1)
        self.blks2_selector_0 = grc_blks2.selector(
            item_size=gr.sizeof_float * 512,
            num_inputs=1,
            num_outputs=2,
            input_index=0,
            output_index=FFTEn,
        )
        self.band_pass_filter_0 = filter.fir_filter_ccc(
            1,
            firdes.complex_band_pass(1, 48000, Filt_Low, Filt_High, 100,
                                     firdes.WIN_HAMMING, 6.76))
        self.audio_sink_0 = audio.sink(48000, "hw:CARD=Device,DEV=0", False)
        self.analog_pwr_squelch_xx_0 = analog.pwr_squelch_cc(
            SQL - 100, 0.001, 0, False)
        self.analog_nbfm_rx_0 = analog.nbfm_rx(
            audio_rate=48000,
            quad_rate=48000,
            tau=75e-6,
            max_dev=5e3,
        )
        self.analog_agc3_xx_0 = analog.agc3_cc(1e-2, 5e-7, 0.1, 1.0, 1)
        self.analog_agc3_xx_0.set_max_gain(1000)

        ##################################################
        # Connections
        ##################################################
        self.connect((self.analog_agc3_xx_0, 0),
                     (self.blocks_complex_to_real_0_0, 0))
        self.connect((self.analog_nbfm_rx_0, 0),
                     (self.blocks_multiply_const_vxx_2_0, 0))
        self.connect((self.analog_pwr_squelch_xx_0, 0),
                     (self.analog_nbfm_rx_0, 0))
        self.connect((self.band_pass_filter_0, 0),
                     (self.analog_pwr_squelch_xx_0, 0))
        self.connect((self.band_pass_filter_0, 0),
                     (self.blocks_complex_to_mag_0, 0))
        self.connect((self.band_pass_filter_0, 0),
                     (self.blocks_complex_to_real_0, 0))
        self.connect((self.blks2_selector_0, 0), (self.blocks_null_sink_0, 0))
        self.connect((self.blks2_selector_0, 1), (self.blocks_udp_sink_0, 0))
        self.connect((self.blocks_add_xx_1, 0),
                     (self.blocks_multiply_const_vxx_1, 0))
        self.connect((self.blocks_add_xx_1_0, 0),
                     (self.blocks_float_to_complex_0, 0))
        self.connect((self.blocks_complex_to_mag_0, 0),
                     (self.blocks_multiply_const_vxx_2_1, 0))
        self.connect((self.blocks_complex_to_real_0, 0),
                     (self.blocks_multiply_const_vxx_2, 0))
        self.connect((self.blocks_complex_to_real_0_0, 0),
                     (self.blocks_multiply_const_vxx_2_1_0, 0))
        self.connect((self.blocks_float_to_complex_0, 0),
                     (self.analog_agc3_xx_0, 0))
        self.connect((self.blocks_multiply_const_vxx_1, 0),
                     (self.audio_sink_0, 0))
        self.connect((self.blocks_multiply_const_vxx_2, 0),
                     (self.blocks_add_xx_1_0, 0))
        self.connect((self.blocks_multiply_const_vxx_2_0, 0),
                     (self.blocks_add_xx_1, 1))
        self.connect((self.blocks_multiply_const_vxx_2_1, 0),
                     (self.blocks_add_xx_1_0, 1))
        self.connect((self.blocks_multiply_const_vxx_2_1_0, 0),
                     (self.blocks_add_xx_1, 0))
        self.connect((self.freq_xlating_fir_filter_xxx_0, 0),
                     (self.band_pass_filter_0, 0))
        self.connect((self.freq_xlating_fir_filter_xxx_0, 0),
                     (self.logpwrfft_x_0, 0))
        self.connect((self.logpwrfft_x_0, 0), (self.blks2_selector_0, 0))
        self.connect((self.pluto_source_0, 0),
                     (self.freq_xlating_fir_filter_xxx_0, 0))
Esempio n. 39
0
    def __init__(self):
        grc_wxgui.top_block_gui.__init__(self, title="Lab 4 1")
        _icon_path = "/usr/share/icons/hicolor/32x32/apps/gnuradio-grc.png"
        self.SetIcon(wx.Icon(_icon_path, wx.BITMAP_TYPE_ANY))

        ##################################################
        # Variables
        ##################################################
        self.samp_rate = samp_rate = 250e3
        self.gain = gain = 40
        self.freq = freq = 98e6
        self.deviation = deviation = 30e3*0 + 5e3
        self.audio_rate = audio_rate = int(48e3)

        ##################################################
        # Blocks
        ##################################################
        self._samp_rate_text_box = forms.text_box(
        	parent=self.GetWin(),
        	value=self.samp_rate,
        	callback=self.set_samp_rate,
        	label="Sample Rate",
        	converter=forms.float_converter(),
        )
        self.Add(self._samp_rate_text_box)
        _gain_sizer = wx.BoxSizer(wx.VERTICAL)
        self._gain_text_box = forms.text_box(
        	parent=self.GetWin(),
        	sizer=_gain_sizer,
        	value=self.gain,
        	callback=self.set_gain,
        	label="Gain",
        	converter=forms.float_converter(),
        	proportion=0,
        )
        self._gain_slider = forms.slider(
        	parent=self.GetWin(),
        	sizer=_gain_sizer,
        	value=self.gain,
        	callback=self.set_gain,
        	minimum=0,
        	maximum=90,
        	num_steps=90,
        	style=wx.SL_HORIZONTAL,
        	cast=float,
        	proportion=1,
        )
        self.Add(_gain_sizer)
        self._freq_text_box = forms.text_box(
        	parent=self.GetWin(),
        	value=self.freq,
        	callback=self.set_freq,
        	label="Frequency",
        	converter=forms.float_converter(),
        )
        self.Add(self._freq_text_box)
        self.wxgui_scopesink2_0 = scopesink2.scope_sink_c(
        	self.GetWin(),
        	title="Scope Plot",
        	sample_rate=audio_rate,
        	v_scale=0.25,
        	v_offset=0,
        	t_scale=0,
        	ac_couple=False,
        	xy_mode=False,
        	num_inputs=1,
        	trig_mode=wxgui.TRIG_MODE_AUTO,
        	y_axis_label="Counts",
        )
        self.Add(self.wxgui_scopesink2_0.win)
        self.uhd_usrp_source_0 = uhd.usrp_source(
        	",".join(("", "")),
        	uhd.stream_args(
        		cpu_format="fc32",
        		channels=range(1),
        	),
        )
        self.uhd_usrp_source_0.set_samp_rate(samp_rate)
        self.uhd_usrp_source_0.set_center_freq(freq, 0)
        self.uhd_usrp_source_0.set_gain(gain, 0)
        self.uhd_usrp_source_0.set_antenna('TX/RX', 0)
        self.rational_resampler_xxx_0 = filter.rational_resampler_ccc(
                interpolation=audio_rate,
                decimation=int(samp_rate),
                taps=None,
                fractional_bw=None,
        )
        self.low_pass_filter_0 = filter.fir_filter_fff(1, firdes.low_pass(
        	1, audio_rate, 3.5e3, 0.5e3, firdes.WIN_HAMMING, 6.76))
        self.blocks_float_to_complex_0 = blocks.float_to_complex(1)
        self.audio_sink_0 = audio.sink(audio_rate, "", True)
        self.analog_quadrature_demod_cf_0 = analog.quadrature_demod_cf((audio_rate/(2*math.pi*deviation))* 0 + ((2*math.pi*deviation)/audio_rate))
        self.analog_pwr_squelch_xx_0 = analog.pwr_squelch_cc(-80, 1e-3, 0, False)

        ##################################################
        # Connections
        ##################################################
        self.connect((self.analog_pwr_squelch_xx_0, 0), (self.analog_quadrature_demod_cf_0, 0))    
        self.connect((self.analog_quadrature_demod_cf_0, 0), (self.blocks_float_to_complex_0, 0))    
        self.connect((self.analog_quadrature_demod_cf_0, 0), (self.low_pass_filter_0, 0))    
        self.connect((self.blocks_float_to_complex_0, 0), (self.wxgui_scopesink2_0, 0))    
        self.connect((self.low_pass_filter_0, 0), (self.audio_sink_0, 0))    
        self.connect((self.low_pass_filter_0, 0), (self.blocks_float_to_complex_0, 1))    
        self.connect((self.rational_resampler_xxx_0, 0), (self.analog_pwr_squelch_xx_0, 0))    
        self.connect((self.uhd_usrp_source_0, 0), (self.rational_resampler_xxx_0, 0))    
Esempio n. 40
0
    def __init__(self, samp_rate=4E6, audio_rate=8000, record=True):
        gr.hier_block2.__init__(self, "TunerDemodAM",
                                gr.io_signature(1, 1, gr.sizeof_gr_complex),
                                gr.io_signature(1, 1, gr.sizeof_float))

        # Default values
        self.center_freq = 0
        squelch_db = -60
        self.agc_ref = 0.1
        self.file_name = "/dev/null"
        self.record = record

        # Decimation values for four stages of decimation
        decims = (5, int(samp_rate/1E6))

        # Low pass filter taps for decimation by 5
        low_pass_filter_taps_0 = \
            grfilter.firdes_low_pass(1, 1, 0.090, 0.010,
                                     grfilter.firdes.WIN_HAMMING)

        # Frequency translating FIR filter decimating by 5
        self.freq_xlating_fir_filter_ccc = \
            grfilter.freq_xlating_fir_filter_ccc(decims[0],
                                                 low_pass_filter_taps_0,
                                                 self.center_freq, samp_rate)

        # FIR filter decimating by 5
        fir_filter_ccc_0 = grfilter.fir_filter_ccc(decims[0],
                                                   low_pass_filter_taps_0)

        # Low pass filter taps for decimation from samp_rate/25 to 40-79.9 ksps
        # In other words, decimation by int(samp_rate/1E6)
        # 12.5 kHz cutoff for NBFM channel bandwidth
        low_pass_filter_taps_1 = grfilter.firdes_low_pass(
            1, samp_rate/decims[0]**2, 12.5E3, 1E3, grfilter.firdes.WIN_HAMMING)

        # FIR filter decimation by int(samp_rate/1E6)
        fir_filter_ccc_1 = grfilter.fir_filter_ccc(decims[1],
                                                   low_pass_filter_taps_1)

        # Non blocking power squelch
        # Squelch level needs to be lower than NBFM or else choppy AM demod
        self.analog_pwr_squelch_cc = analog.pwr_squelch_cc(squelch_db,
                                                           1e-1, 0, False)

        # AGC with reference set for nomninal 0 dB volume
        # Paramaters tweaked to prevent impulse during squelching
        self.agc3_cc = analog.agc3_cc(1.0, 1E-4, self.agc_ref, 10, 1)
        self.agc3_cc.set_max_gain(65536)

        # AM demod with complex_to_mag()
        # Can't use analog.am_demod_cf() since it won't work with N>2 demods
        am_demod_cf = blocks.complex_to_mag(1)

        # 3.5 kHz cutoff for audio bandwidth
        low_pass_filter_taps_2 = grfilter.firdes_low_pass(1,\
                        samp_rate/(decims[1] * decims[0]**2),\
                        3.5E3, 500, grfilter.firdes.WIN_HAMMING)

        # FIR filter decimating by 5 from 40-79.9 ksps to 8-15.98 ksps
        fir_filter_fff_0 = grfilter.fir_filter_fff(decims[0],
                                                   low_pass_filter_taps_2)

        # Polyphase resampler allows arbitary RF sample rates
        # Takes 8-15.98 ksps to a constant 8 ksps for audio
        pfb_resamp = audio_rate/float(samp_rate/(decims[1] * decims[0]**3))
        pfb_arb_resampler_fff = pfb.arb_resampler_fff(pfb_resamp, taps=None,
                                                      flt_size=32)

        # Connect the blocks for the demod
        self.connect(self, self.freq_xlating_fir_filter_ccc)
        self.connect(self.freq_xlating_fir_filter_ccc, fir_filter_ccc_0)
        self.connect(fir_filter_ccc_0, fir_filter_ccc_1)
        self.connect(fir_filter_ccc_1, self.analog_pwr_squelch_cc)
        self.connect(self.analog_pwr_squelch_cc, self.agc3_cc)
        self.connect(self.agc3_cc, am_demod_cf)
        self.connect(am_demod_cf, fir_filter_fff_0)
        self.connect(fir_filter_fff_0, pfb_arb_resampler_fff)
        self.connect(pfb_arb_resampler_fff, self)

        # Need to set this to a very low value of -200 since it is after demod
        # Only want it to gate when the previuos squelch has gone to zero
        analog_pwr_squelch_ff = analog.pwr_squelch_ff(-200, 1e-1, 0, True)

        # File sink with single channel and 8 bits/sample
        self.blocks_wavfile_sink = blocks.wavfile_sink(self.file_name, 1,
                                                       audio_rate, 8)

        # Connect the blocks for recording
        self.connect(pfb_arb_resampler_fff, analog_pwr_squelch_ff)
        self.connect(analog_pwr_squelch_ff, self.blocks_wavfile_sink)
Esempio n. 41
0
    def __init__(self):
        gr.top_block.__init__(self, "Ham2Mon NBFM Receiver Flow Example")
        Qt.QWidget.__init__(self)
        self.setWindowTitle("Ham2Mon NBFM Receiver Flow Example")
        try:
             self.setWindowIcon(Qt.QIcon.fromTheme('gnuradio-grc'))
        except:
             pass
        self.top_scroll_layout = Qt.QVBoxLayout()
        self.setLayout(self.top_scroll_layout)
        self.top_scroll = Qt.QScrollArea()
        self.top_scroll.setFrameStyle(Qt.QFrame.NoFrame)
        self.top_scroll_layout.addWidget(self.top_scroll)
        self.top_scroll.setWidgetResizable(True)
        self.top_widget = Qt.QWidget()
        self.top_scroll.setWidget(self.top_widget)
        self.top_layout = Qt.QVBoxLayout(self.top_widget)
        self.top_grid_layout = Qt.QGridLayout()
        self.top_layout.addLayout(self.top_grid_layout)

        self.settings = Qt.QSettings("GNU Radio", "nbfm_flow_example")
        self.restoreGeometry(self.settings.value("geometry").toByteArray())

        ##################################################
        # Variables
        ##################################################
        self.samp_rate = samp_rate = 1E6
        self.initial_decim = initial_decim = 5
        self.samp_ratio = samp_ratio = samp_rate/1E6
        self.final_rate = final_rate = samp_rate/initial_decim**2/int(samp_rate/1E6)
        
        self.variable_low_pass_filter_taps_2 = variable_low_pass_filter_taps_2 = firdes.low_pass(1.0, final_rate, 3500, 500, firdes.WIN_HAMMING, 6.76)
          
        
        self.variable_low_pass_filter_taps_1 = variable_low_pass_filter_taps_1 = firdes.low_pass(1.0, samp_rate/25, 12.5E3, 1E3, firdes.WIN_HAMMING, 6.76)
          
        
        self.variable_low_pass_filter_taps_0 = variable_low_pass_filter_taps_0 = firdes.low_pass(1.0, 1, 0.090, 0.010, firdes.WIN_HAMMING, 6.76)
          
        self.squelch_dB = squelch_dB = -70
        self.gain_db = gain_db = 30
        self.final_decim = final_decim = int(samp_rate/1E6)
        self.file_name = file_name = "test.wav"
        self.fft_length = fft_length = 256 * int(pow(2, np.ceil(np.log(samp_ratio)/np.log(2))))
        self.demod_bb_freq = demod_bb_freq = 390E3
        self.center_freq = center_freq = 144E6

        ##################################################
        # Blocks
        ##################################################
        self._squelch_dB_range = Range(-100, 0, 5, -70, 200)
        self._squelch_dB_win = RangeWidget(self._squelch_dB_range, self.set_squelch_dB, "Squelch (dB)", "counter_slider", float)
        self.top_grid_layout.addWidget(self._squelch_dB_win, 5,1,1,3)
        self._gain_db_range = Range(0, 70, 1, 30, 200)
        self._gain_db_win = RangeWidget(self._gain_db_range, self.set_gain_db, "HW Gain (dB)", "counter_slider", float)
        self.top_grid_layout.addWidget(self._gain_db_win, 4,1,1,3)
        self._demod_bb_freq_range = Range(-samp_rate/2, samp_rate/2, 5E3, 390E3, 200)
        self._demod_bb_freq_win = RangeWidget(self._demod_bb_freq_range, self.set_demod_bb_freq, "Demod BB Freq (Hz)", "counter_slider", float)
        self.top_grid_layout.addWidget(self._demod_bb_freq_win, 3,1,1,3)
        self.qtgui_time_sink_x_0 = qtgui.time_sink_f(
        	fft_length, #size
        	samp_rate, #samp_rate
        	"Averaged Spectrum", #name
        	1 #number of inputs
        )
        self.qtgui_time_sink_x_0.set_update_time(0.10)
        self.qtgui_time_sink_x_0.set_y_axis(-60, 40)
        
        self.qtgui_time_sink_x_0.set_y_label("Power", "")
        
        self.qtgui_time_sink_x_0.enable_tags(-1, True)
        self.qtgui_time_sink_x_0.set_trigger_mode(qtgui.TRIG_MODE_FREE, qtgui.TRIG_SLOPE_POS, 0.0, 0, 0, "")
        self.qtgui_time_sink_x_0.enable_autoscale(False)
        self.qtgui_time_sink_x_0.enable_grid(False)
        self.qtgui_time_sink_x_0.enable_control_panel(False)
        
        if not True:
          self.qtgui_time_sink_x_0.disable_legend()
        
        labels = ["", "", "", "", "",
                  "", "", "", "", ""]
        widths = [1, 1, 1, 1, 1,
                  1, 1, 1, 1, 1]
        colors = ["blue", "red", "green", "black", "cyan",
                  "magenta", "yellow", "dark red", "dark green", "blue"]
        styles = [1, 1, 1, 1, 1,
                  1, 1, 1, 1, 1]
        markers = [-1, -1, -1, -1, -1,
                   -1, -1, -1, -1, -1]
        alphas = [1.0, 1.0, 1.0, 1.0, 1.0,
                  1.0, 1.0, 1.0, 1.0, 1.0]
        
        for i in xrange(1):
            if len(labels[i]) == 0:
                self.qtgui_time_sink_x_0.set_line_label(i, "Data {0}".format(i))
            else:
                self.qtgui_time_sink_x_0.set_line_label(i, labels[i])
            self.qtgui_time_sink_x_0.set_line_width(i, widths[i])
            self.qtgui_time_sink_x_0.set_line_color(i, colors[i])
            self.qtgui_time_sink_x_0.set_line_style(i, styles[i])
            self.qtgui_time_sink_x_0.set_line_marker(i, markers[i])
            self.qtgui_time_sink_x_0.set_line_alpha(i, alphas[i])
        
        self._qtgui_time_sink_x_0_win = sip.wrapinstance(self.qtgui_time_sink_x_0.pyqwidget(), Qt.QWidget)
        self.top_grid_layout.addWidget(self._qtgui_time_sink_x_0_win, 0,1,3,1)
        self.qtgui_freq_sink_x_0_0 = qtgui.freq_sink_c(
        	1024, #size
        	firdes.WIN_BLACKMAN_hARRIS, #wintype
        	0, #fc
        	final_rate, #bw
        	"Decimated Channel", #name
        	1 #number of inputs
        )
        self.qtgui_freq_sink_x_0_0.set_update_time(0.10)
        self.qtgui_freq_sink_x_0_0.set_y_axis(-200, -60)
        self.qtgui_freq_sink_x_0_0.set_trigger_mode(qtgui.TRIG_MODE_FREE, 0.0, 0, "")
        self.qtgui_freq_sink_x_0_0.enable_autoscale(False)
        self.qtgui_freq_sink_x_0_0.enable_grid(False)
        self.qtgui_freq_sink_x_0_0.set_fft_average(1.0)
        self.qtgui_freq_sink_x_0_0.enable_control_panel(False)
        
        if not True:
          self.qtgui_freq_sink_x_0_0.disable_legend()
        
        if complex == type(float()):
          self.qtgui_freq_sink_x_0_0.set_plot_pos_half(not True)
        
        labels = ["", "", "", "", "",
                  "", "", "", "", ""]
        widths = [1, 1, 1, 1, 1,
                  1, 1, 1, 1, 1]
        colors = ["blue", "red", "green", "black", "cyan",
                  "magenta", "yellow", "dark red", "dark green", "dark blue"]
        alphas = [1.0, 1.0, 1.0, 1.0, 1.0,
                  1.0, 1.0, 1.0, 1.0, 1.0]
        for i in xrange(1):
            if len(labels[i]) == 0:
                self.qtgui_freq_sink_x_0_0.set_line_label(i, "Data {0}".format(i))
            else:
                self.qtgui_freq_sink_x_0_0.set_line_label(i, labels[i])
            self.qtgui_freq_sink_x_0_0.set_line_width(i, widths[i])
            self.qtgui_freq_sink_x_0_0.set_line_color(i, colors[i])
            self.qtgui_freq_sink_x_0_0.set_line_alpha(i, alphas[i])
        
        self._qtgui_freq_sink_x_0_0_win = sip.wrapinstance(self.qtgui_freq_sink_x_0_0.pyqwidget(), Qt.QWidget)
        self.top_grid_layout.addWidget(self._qtgui_freq_sink_x_0_0_win, 3,0,3,1)
        self.qtgui_freq_sink_x_0 = qtgui.freq_sink_c(
        	fft_length, #size
        	firdes.WIN_BLACKMAN_hARRIS, #wintype
        	144E6, #fc
        	samp_rate, #bw
        	"Spectrum", #name
        	1 #number of inputs
        )
        self.qtgui_freq_sink_x_0.set_update_time(0.10)
        self.qtgui_freq_sink_x_0.set_y_axis(-120, -20)
        self.qtgui_freq_sink_x_0.set_trigger_mode(qtgui.TRIG_MODE_FREE, 0.0, 0, "")
        self.qtgui_freq_sink_x_0.enable_autoscale(False)
        self.qtgui_freq_sink_x_0.enable_grid(False)
        self.qtgui_freq_sink_x_0.set_fft_average(1.0)
        self.qtgui_freq_sink_x_0.enable_control_panel(False)
        
        if not True:
          self.qtgui_freq_sink_x_0.disable_legend()
        
        if complex == type(float()):
          self.qtgui_freq_sink_x_0.set_plot_pos_half(not True)
        
        labels = ["", "", "", "", "",
                  "", "", "", "", ""]
        widths = [1, 1, 1, 1, 1,
                  1, 1, 1, 1, 1]
        colors = ["blue", "red", "green", "black", "cyan",
                  "magenta", "yellow", "dark red", "dark green", "dark blue"]
        alphas = [1.0, 1.0, 1.0, 1.0, 1.0,
                  1.0, 1.0, 1.0, 1.0, 1.0]
        for i in xrange(1):
            if len(labels[i]) == 0:
                self.qtgui_freq_sink_x_0.set_line_label(i, "Data {0}".format(i))
            else:
                self.qtgui_freq_sink_x_0.set_line_label(i, labels[i])
            self.qtgui_freq_sink_x_0.set_line_width(i, widths[i])
            self.qtgui_freq_sink_x_0.set_line_color(i, colors[i])
            self.qtgui_freq_sink_x_0.set_line_alpha(i, alphas[i])
        
        self._qtgui_freq_sink_x_0_win = sip.wrapinstance(self.qtgui_freq_sink_x_0.pyqwidget(), Qt.QWidget)
        self.top_grid_layout.addWidget(self._qtgui_freq_sink_x_0_win, 0,0,3,1)
        self.pfb_arb_resampler_xxx_0 = pfb.arb_resampler_fff(
        	  16E3/float(final_rate/5),
                  taps=None,
        	  flt_size=32)
        self.pfb_arb_resampler_xxx_0.declare_sample_delay(0)
        	
        self.osmosdr_source_0 = osmosdr.source( args="numchan=" + str(1) + " " + "uhd" )
        self.osmosdr_source_0.set_sample_rate(samp_rate)
        self.osmosdr_source_0.set_center_freq(center_freq, 0)
        self.osmosdr_source_0.set_freq_corr(0, 0)
        self.osmosdr_source_0.set_dc_offset_mode(0, 0)
        self.osmosdr_source_0.set_iq_balance_mode(0, 0)
        self.osmosdr_source_0.set_gain_mode(False, 0)
        self.osmosdr_source_0.set_gain(gain_db, 0)
        self.osmosdr_source_0.set_if_gain(20, 0)
        self.osmosdr_source_0.set_bb_gain(20, 0)
        self.osmosdr_source_0.set_antenna("", 0)
        self.osmosdr_source_0.set_bandwidth(samp_rate*0.8, 0)
          
        self.freq_xlating_fir_filter_xxx_0 = filter.freq_xlating_fir_filter_ccc(initial_decim, (variable_low_pass_filter_taps_0), demod_bb_freq, samp_rate)
        self.fir_filter_xxx_0_1 = filter.fir_filter_fff(initial_decim, (variable_low_pass_filter_taps_0))
        self.fir_filter_xxx_0_1.declare_sample_delay(0)
        self.fir_filter_xxx_0_0 = filter.fir_filter_ccc(int(samp_rate/1E6), (variable_low_pass_filter_taps_0))
        self.fir_filter_xxx_0_0.declare_sample_delay(0)
        self.fir_filter_xxx_0 = filter.fir_filter_ccc(initial_decim, (variable_low_pass_filter_taps_0))
        self.fir_filter_xxx_0.declare_sample_delay(0)
        self.fft_vxx_0 = fft.fft_vcc(fft_length, True, (window.blackmanharris(fft_length)), True, 1)
        self.blocks_wavfile_sink_0 = blocks.wavfile_sink(file_name, 1, 16000, 8)
        self.blocks_vector_to_stream_0 = blocks.vector_to_stream(gr.sizeof_float*1, fft_length)
        self.blocks_stream_to_vector_0 = blocks.stream_to_vector(gr.sizeof_gr_complex*1, fft_length)
        self.blocks_probe_signal_vx_0 = blocks.probe_signal_vf(fft_length)
        self.blocks_nlog10_ff_0 = blocks.nlog10_ff(10, fft_length, 0)
        self.blocks_keep_one_in_n_0 = blocks.keep_one_in_n(gr.sizeof_gr_complex*fft_length, int(round(samp_rate/fft_length/1000)))
        self.blocks_integrate_xx_0 = blocks.integrate_ff(100, fft_length)
        self.blocks_complex_to_mag_squared_0 = blocks.complex_to_mag_squared(fft_length)
        self.audio_sink_0 = audio.sink(16000, "", True)
        self.analog_quadrature_demod_cf_0 = analog.quadrature_demod_cf(0.050)
        self.analog_pwr_squelch_xx_0_0 = analog.pwr_squelch_ff(-200, 0.1, 0, True)
        self.analog_pwr_squelch_xx_0 = analog.pwr_squelch_cc(squelch_dB, 0.1, 0, False)

        ##################################################
        # Connections
        ##################################################
        self.connect((self.analog_pwr_squelch_xx_0, 0), (self.analog_quadrature_demod_cf_0, 0))    
        self.connect((self.analog_pwr_squelch_xx_0_0, 0), (self.blocks_wavfile_sink_0, 0))    
        self.connect((self.analog_quadrature_demod_cf_0, 0), (self.fir_filter_xxx_0_1, 0))    
        self.connect((self.blocks_complex_to_mag_squared_0, 0), (self.blocks_integrate_xx_0, 0))    
        self.connect((self.blocks_integrate_xx_0, 0), (self.blocks_nlog10_ff_0, 0))    
        self.connect((self.blocks_keep_one_in_n_0, 0), (self.fft_vxx_0, 0))    
        self.connect((self.blocks_nlog10_ff_0, 0), (self.blocks_probe_signal_vx_0, 0))    
        self.connect((self.blocks_nlog10_ff_0, 0), (self.blocks_vector_to_stream_0, 0))    
        self.connect((self.blocks_stream_to_vector_0, 0), (self.blocks_keep_one_in_n_0, 0))    
        self.connect((self.blocks_vector_to_stream_0, 0), (self.qtgui_time_sink_x_0, 0))    
        self.connect((self.fft_vxx_0, 0), (self.blocks_complex_to_mag_squared_0, 0))    
        self.connect((self.fir_filter_xxx_0, 0), (self.fir_filter_xxx_0_0, 0))    
        self.connect((self.fir_filter_xxx_0_0, 0), (self.analog_pwr_squelch_xx_0, 0))    
        self.connect((self.fir_filter_xxx_0_0, 0), (self.qtgui_freq_sink_x_0_0, 0))    
        self.connect((self.fir_filter_xxx_0_1, 0), (self.pfb_arb_resampler_xxx_0, 0))    
        self.connect((self.freq_xlating_fir_filter_xxx_0, 0), (self.fir_filter_xxx_0, 0))    
        self.connect((self.osmosdr_source_0, 0), (self.blocks_stream_to_vector_0, 0))    
        self.connect((self.osmosdr_source_0, 0), (self.freq_xlating_fir_filter_xxx_0, 0))    
        self.connect((self.osmosdr_source_0, 0), (self.qtgui_freq_sink_x_0, 0))    
        self.connect((self.pfb_arb_resampler_xxx_0, 0), (self.analog_pwr_squelch_xx_0_0, 0))    
        self.connect((self.pfb_arb_resampler_xxx_0, 0), (self.audio_sink_0, 0))    
Esempio n. 42
0
	def __init__(self):
		grc_wxgui.top_block_gui.__init__(self, title="APRS Receiver")

		##################################################
		# Variables
		##################################################
		self.space = space = 1200
		self.mark = mark = 2200
		self.xlate_decim = xlate_decim = 8
		self.xlate_bandwidth = xlate_bandwidth = 1200*6
		self.sym_dev = sym_dev = (mark-space)/2
		self.samp_rate = samp_rate = 1e6
		self.quad_rate = quad_rate = 96000
		self.gain = gain = 10
		self.freq_offset = freq_offset = 390e3
		self.freq = freq = 144e6
		self.baud = baud = 1200
		self.audio_rate = audio_rate = 48000
		self.audio_mul = audio_mul = 1
		self.aprs_rate = aprs_rate = 12000
		self.ant = ant = 'TX/RX'

		##################################################
		# Message Queues
		##################################################
		ax25_hdlc_framer_b_0_msgq_out = ax25_print_frame_0_msgq_in = gr.msg_queue(2)

		##################################################
		# Blocks
		##################################################
		self.nb = self.nb = wx.Notebook(self.GetWin(), style=wx.NB_TOP)
		self.nb.AddPage(grc_wxgui.Panel(self.nb), "Baseband")
		self.nb.AddPage(grc_wxgui.Panel(self.nb), "Waterfall")
		self.nb.AddPage(grc_wxgui.Panel(self.nb), "Signal")
		self.nb.AddPage(grc_wxgui.Panel(self.nb), "Slicer")
		self.nb.AddPage(grc_wxgui.Panel(self.nb), "Eye")
		self.Add(self.nb)
		_gain_sizer = wx.BoxSizer(wx.VERTICAL)
		self._gain_text_box = forms.text_box(
			parent=self.GetWin(),
			sizer=_gain_sizer,
			value=self.gain,
			callback=self.set_gain,
			label="RF Gain",
			converter=forms.float_converter(),
			proportion=0,
		)
		self._gain_slider = forms.slider(
			parent=self.GetWin(),
			sizer=_gain_sizer,
			value=self.gain,
			callback=self.set_gain,
			minimum=0,
			maximum=50,
			num_steps=50,
			style=wx.SL_HORIZONTAL,
			cast=float,
			proportion=1,
		)
		self.Add(_gain_sizer)
		_freq_offset_sizer = wx.BoxSizer(wx.VERTICAL)
		self._freq_offset_text_box = forms.text_box(
			parent=self.GetWin(),
			sizer=_freq_offset_sizer,
			value=self.freq_offset,
			callback=self.set_freq_offset,
			label="Freq Offset",
			converter=forms.float_converter(),
			proportion=0,
		)
		self._freq_offset_slider = forms.slider(
			parent=self.GetWin(),
			sizer=_freq_offset_sizer,
			value=self.freq_offset,
			callback=self.set_freq_offset,
			minimum=-500e3,
			maximum=500e3,
			num_steps=1000,
			style=wx.SL_HORIZONTAL,
			cast=float,
			proportion=1,
		)
		self.Add(_freq_offset_sizer)
		self._freq_text_box = forms.text_box(
			parent=self.GetWin(),
			value=self.freq,
			callback=self.set_freq,
			label="Freq",
			converter=forms.float_converter(),
		)
		self.Add(self._freq_text_box)
		_audio_mul_sizer = wx.BoxSizer(wx.VERTICAL)
		self._audio_mul_text_box = forms.text_box(
			parent=self.GetWin(),
			sizer=_audio_mul_sizer,
			value=self.audio_mul,
			callback=self.set_audio_mul,
			label="Audio",
			converter=forms.float_converter(),
			proportion=0,
		)
		self._audio_mul_slider = forms.slider(
			parent=self.GetWin(),
			sizer=_audio_mul_sizer,
			value=self.audio_mul,
			callback=self.set_audio_mul,
			minimum=0,
			maximum=10,
			num_steps=1000,
			style=wx.SL_HORIZONTAL,
			cast=float,
			proportion=1,
		)
		self.Add(_audio_mul_sizer)
		self._ant_chooser = forms.drop_down(
			parent=self.GetWin(),
			value=self.ant,
			callback=self.set_ant,
			label="Antenna",
			choices=['TX/RX', 'RX2'],
			labels=[],
		)
		self.Add(self._ant_chooser)
		self.wxgui_waterfallsink2_0 = waterfallsink2.waterfall_sink_c(
			self.nb.GetPage(1).GetWin(),
			baseband_freq=0,
			dynamic_range=50,
			ref_level=-65,
			ref_scale=2.0,
			sample_rate=aprs_rate,
			fft_size=512,
			fft_rate=15,
			average=False,
			avg_alpha=None,
			title="Waterfall Plot",
		)
		self.nb.GetPage(1).Add(self.wxgui_waterfallsink2_0.win)
		self.wxgui_scopesink2_0_0_0 = scopesink2.scope_sink_f(
			self.nb.GetPage(4).GetWin(),
			title="Scope Plot",
			sample_rate=aprs_rate/10,
			v_scale=0.5,
			v_offset=0,
			t_scale=0.002,
			ac_couple=False,
			xy_mode=False,
			num_inputs=1,
			trig_mode=gr.gr_TRIG_MODE_AUTO,
			y_axis_label="Counts",
		)
		self.nb.GetPage(4).Add(self.wxgui_scopesink2_0_0_0.win)
		self.wxgui_scopesink2_0_0 = scopesink2.scope_sink_f(
			self.nb.GetPage(3).GetWin(),
			title="Scope Plot",
			sample_rate=aprs_rate,
			v_scale=0.5,
			v_offset=0,
			t_scale=0.002,
			ac_couple=False,
			xy_mode=False,
			num_inputs=1,
			trig_mode=gr.gr_TRIG_MODE_AUTO,
			y_axis_label="Counts",
		)
		self.nb.GetPage(3).Add(self.wxgui_scopesink2_0_0.win)
		self.wxgui_scopesink2_0 = scopesink2.scope_sink_f(
			self.nb.GetPage(2).GetWin(),
			title="Scope Plot",
			sample_rate=aprs_rate,
			v_scale=0.05,
			v_offset=0,
			t_scale=0.002,
			ac_couple=False,
			xy_mode=False,
			num_inputs=1,
			trig_mode=gr.gr_TRIG_MODE_AUTO,
			y_axis_label="Counts",
		)
		self.nb.GetPage(2).Add(self.wxgui_scopesink2_0.win)
		self.wxgui_fftsink2_0 = fftsink2.fft_sink_c(
			self.nb.GetPage(0).GetWin(),
			baseband_freq=0,
			y_per_div=10,
			y_divs=10,
			ref_level=-20,
			ref_scale=2.0,
			sample_rate=samp_rate,
			fft_size=1024,
			fft_rate=15,
			average=True,
			avg_alpha=0.5,
			title="FFT Plot",
			peak_hold=False,
		)
		self.nb.GetPage(0).Add(self.wxgui_fftsink2_0.win)
		def wxgui_fftsink2_0_callback(x, y):
			self.set_freq_offset(x)
		
		self.wxgui_fftsink2_0.set_callback(wxgui_fftsink2_0_callback)
		self.uhd_usrp_source_0 = uhd.usrp_source(
			device_addr="",
			stream_args=uhd.stream_args(
				cpu_format="fc32",
				channels=range(1),
			),
		)
		self.uhd_usrp_source_0.set_samp_rate(samp_rate)
		self.uhd_usrp_source_0.set_center_freq(freq, 0)
		self.uhd_usrp_source_0.set_gain(gain, 0)
		self.uhd_usrp_source_0.set_antenna(ant, 0)
		self.low_pass_filter_0 = gr.fir_filter_ccf(1, firdes.low_pass(
			1, aprs_rate, 2e3, 600, firdes.WIN_HAMMING, 6.76))
		self.gr_single_pole_iir_filter_xx_0 = gr.single_pole_iir_filter_ff(0.0001, 1)
		self.gr_null_sink_0 = gr.null_sink(gr.sizeof_float*1)
		self.gr_multiply_xx_0 = gr.multiply_vcc(1)
		self.gr_multiply_const_vxx_0 = gr.multiply_const_vff((audio_mul, ))
		self.gr_agc_xx_1 = gr.agc_ff(1e-3, 0.8, 0.1, 10.0)
		self.freq_xlating_fir_filter_xxx_0 = filter.freq_xlating_fir_filter_ccc(xlate_decim, (firdes.low_pass(1, samp_rate, xlate_bandwidth/2, 1000)), freq_offset, samp_rate)
		self.digital_clock_recovery_mm_xx_0 = digital.clock_recovery_mm_ff(10, .25 * (0.05)**2, 0.5, 0.005, 0.005)
		self.digital_binary_slicer_fb_0 = digital.binary_slicer_fb()
		self.blocks_sub_xx_0 = blocks.sub_ff(1)
		self.blocks_float_to_complex_0 = blocks.float_to_complex(1)
		self.blks2_rational_resampler_xxx_0_0 = blks2.rational_resampler_ccc(
			interpolation=quad_rate,
			decimation=int(samp_rate/xlate_decim),
			taps=None,
			fractional_bw=None,
		)
		self.blks2_rational_resampler_xxx_0 = blks2.rational_resampler_ccc(
			interpolation=aprs_rate,
			decimation=quad_rate,
			taps=None,
			fractional_bw=None,
		)
		self.blks2_nbfm_rx_0_0 = blks2.nbfm_rx(
			audio_rate=audio_rate,
			quad_rate=quad_rate,
			tau=75e-6,
			max_dev=25000,
		)
		self.blks2_nbfm_rx_0 = blks2.nbfm_rx(
			audio_rate=aprs_rate,
			quad_rate=quad_rate,
			tau=75e-6,
			max_dev=3e3,
		)
		self.ax25_print_frame_0 = packetradio.queue_watcher_thread(ax25_print_frame_0_msgq_in)
		self.ax25_hdlc_framer_b_0 = packetradio.hdlc_framer(ax25_hdlc_framer_b_0_msgq_out, False)
		self.analog_sig_source_x_0 = analog.sig_source_c(aprs_rate, analog.GR_SIN_WAVE, -(min(mark,space)+sym_dev), 1, 0)
		self.analog_quadrature_demod_cf_0 = analog.quadrature_demod_cf(aprs_rate/(2*math.pi*sym_dev))
		self.analog_pwr_squelch_xx_0_0_0 = analog.pwr_squelch_cc(-70, 1e-1, 0, False)
		self.analog_pwr_squelch_xx_0_0 = analog.pwr_squelch_cc(-70, 1e-1, 0, False)

		##################################################
		# Connections
		##################################################
		self.connect((self.uhd_usrp_source_0, 0), (self.wxgui_fftsink2_0, 0))
		self.connect((self.blks2_rational_resampler_xxx_0_0, 0), (self.blks2_rational_resampler_xxx_0, 0))
		self.connect((self.freq_xlating_fir_filter_xxx_0, 0), (self.blks2_rational_resampler_xxx_0_0, 0))
		self.connect((self.blks2_rational_resampler_xxx_0, 0), (self.wxgui_waterfallsink2_0, 0))
		self.connect((self.uhd_usrp_source_0, 0), (self.freq_xlating_fir_filter_xxx_0, 0))
		self.connect((self.digital_clock_recovery_mm_xx_0, 0), (self.digital_binary_slicer_fb_0, 0))
		self.connect((self.blocks_sub_xx_0, 0), (self.digital_clock_recovery_mm_xx_0, 0))
		self.connect((self.gr_single_pole_iir_filter_xx_0, 0), (self.blocks_sub_xx_0, 1))
		self.connect((self.analog_quadrature_demod_cf_0, 0), (self.gr_single_pole_iir_filter_xx_0, 0))
		self.connect((self.analog_quadrature_demod_cf_0, 0), (self.blocks_sub_xx_0, 0))
		self.connect((self.low_pass_filter_0, 0), (self.analog_quadrature_demod_cf_0, 0))
		self.connect((self.gr_multiply_xx_0, 0), (self.low_pass_filter_0, 0))
		self.connect((self.analog_sig_source_x_0, 0), (self.gr_multiply_xx_0, 1))
		self.connect((self.blocks_float_to_complex_0, 0), (self.gr_multiply_xx_0, 0))
		self.connect((self.blks2_nbfm_rx_0, 0), (self.blocks_float_to_complex_0, 0))
		self.connect((self.blks2_nbfm_rx_0, 0), (self.blocks_float_to_complex_0, 1))
		self.connect((self.digital_clock_recovery_mm_xx_0, 0), (self.wxgui_scopesink2_0_0_0, 0))
		self.connect((self.digital_binary_slicer_fb_0, 0), (self.ax25_hdlc_framer_b_0, 0))
		self.connect((self.blks2_nbfm_rx_0, 0), (self.wxgui_scopesink2_0, 0))
		self.connect((self.blks2_rational_resampler_xxx_0_0, 0), (self.analog_pwr_squelch_xx_0_0, 0))
		self.connect((self.analog_pwr_squelch_xx_0_0_0, 0), (self.blks2_nbfm_rx_0, 0))
		self.connect((self.blks2_rational_resampler_xxx_0_0, 0), (self.analog_pwr_squelch_xx_0_0_0, 0))
		self.connect((self.analog_quadrature_demod_cf_0, 0), (self.wxgui_scopesink2_0_0, 0))
		self.connect((self.blks2_nbfm_rx_0_0, 0), (self.gr_agc_xx_1, 0))
		self.connect((self.analog_pwr_squelch_xx_0_0, 0), (self.blks2_nbfm_rx_0_0, 0))
		self.connect((self.gr_agc_xx_1, 0), (self.gr_multiply_const_vxx_0, 0))
		self.connect((self.gr_multiply_const_vxx_0, 0), (self.gr_null_sink_0, 0))
Esempio n. 43
0
    def __init__(self):
        gr.top_block.__init__(self, "Ham2Mon Receiver Flow Example")
        Qt.QWidget.__init__(self)
        self.setWindowTitle("Ham2Mon Receiver Flow Example")
        try:
            self.setWindowIcon(Qt.QIcon.fromTheme('gnuradio-grc'))
        except:
            pass
        self.top_scroll_layout = Qt.QVBoxLayout()
        self.setLayout(self.top_scroll_layout)
        self.top_scroll = Qt.QScrollArea()
        self.top_scroll.setFrameStyle(Qt.QFrame.NoFrame)
        self.top_scroll_layout.addWidget(self.top_scroll)
        self.top_scroll.setWidgetResizable(True)
        self.top_widget = Qt.QWidget()
        self.top_scroll.setWidget(self.top_widget)
        self.top_layout = Qt.QVBoxLayout(self.top_widget)
        self.top_grid_layout = Qt.QGridLayout()
        self.top_layout.addLayout(self.top_grid_layout)

        self.settings = Qt.QSettings("GNU Radio", "flow_example")
        self.restoreGeometry(self.settings.value("geometry").toByteArray())

        ##################################################
        # Variables
        ##################################################
        self.samp_rate = samp_rate = 1E6
        self.initial_decim = initial_decim = 5
        self.samp_ratio = samp_ratio = samp_rate / 1E6
        self.final_rate = final_rate = samp_rate / initial_decim**2 / int(
            samp_rate / 1E6)

        self.variable_low_pass_filter_taps_2 = variable_low_pass_filter_taps_2 = firdes.low_pass(
            1.0, final_rate, 3500, 500, firdes.WIN_HAMMING, 6.76)

        self.variable_low_pass_filter_taps_1 = variable_low_pass_filter_taps_1 = firdes.low_pass(
            1.0, samp_rate / 25, 12.5E3, 1E3, firdes.WIN_HAMMING, 6.76)

        self.variable_low_pass_filter_taps_0 = variable_low_pass_filter_taps_0 = firdes.low_pass(
            1.0, 1, 0.090, 0.010, firdes.WIN_HAMMING, 6.76)

        self.squelch_dB = squelch_dB = -70
        self.gain_db = gain_db = 30
        self.final_decim = final_decim = int(samp_rate / 1E6)
        self.file_name = file_name = "test.wav"
        self.fft_length = fft_length = 256 * int(
            pow(2, np.ceil(np.log(samp_ratio) / np.log(2))))
        self.demod_bb_freq = demod_bb_freq = 390E3
        self.center_freq = center_freq = 144E6

        ##################################################
        # Blocks
        ##################################################
        self._squelch_dB_range = Range(-100, 0, 5, -70, 200)
        self._squelch_dB_win = RangeWidget(self._squelch_dB_range,
                                           self.set_squelch_dB, "Squelch (dB)",
                                           "counter_slider", float)
        self.top_grid_layout.addWidget(self._squelch_dB_win, 5, 1, 1, 3)
        self._gain_db_range = Range(0, 70, 1, 30, 200)
        self._gain_db_win = RangeWidget(self._gain_db_range, self.set_gain_db,
                                        "HW Gain (dB)", "counter_slider",
                                        float)
        self.top_grid_layout.addWidget(self._gain_db_win, 4, 1, 1, 3)
        self._demod_bb_freq_range = Range(-samp_rate / 2, samp_rate / 2, 5E3,
                                          390E3, 200)
        self._demod_bb_freq_win = RangeWidget(self._demod_bb_freq_range,
                                              self.set_demod_bb_freq,
                                              "Demod BB Freq (Hz)",
                                              "counter_slider", float)
        self.top_grid_layout.addWidget(self._demod_bb_freq_win, 3, 1, 1, 3)
        self.qtgui_time_sink_x_0 = qtgui.time_sink_f(
            fft_length,  #size
            samp_rate,  #samp_rate
            "Averaged Spectrum",  #name
            1  #number of inputs
        )
        self.qtgui_time_sink_x_0.set_update_time(0.10)
        self.qtgui_time_sink_x_0.set_y_axis(-60, 40)

        self.qtgui_time_sink_x_0.set_y_label("Power", "")

        self.qtgui_time_sink_x_0.enable_tags(-1, True)
        self.qtgui_time_sink_x_0.set_trigger_mode(qtgui.TRIG_MODE_FREE,
                                                  qtgui.TRIG_SLOPE_POS, 0.0, 0,
                                                  0, "")
        self.qtgui_time_sink_x_0.enable_autoscale(False)
        self.qtgui_time_sink_x_0.enable_grid(False)
        self.qtgui_time_sink_x_0.enable_control_panel(False)

        if not True:
            self.qtgui_time_sink_x_0.disable_legend()

        labels = ["", "", "", "", "", "", "", "", "", ""]
        widths = [1, 1, 1, 1, 1, 1, 1, 1, 1, 1]
        colors = [
            "blue", "red", "green", "black", "cyan", "magenta", "yellow",
            "dark red", "dark green", "blue"
        ]
        styles = [1, 1, 1, 1, 1, 1, 1, 1, 1, 1]
        markers = [-1, -1, -1, -1, -1, -1, -1, -1, -1, -1]
        alphas = [1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0]

        for i in xrange(1):
            if len(labels[i]) == 0:
                self.qtgui_time_sink_x_0.set_line_label(
                    i, "Data {0}".format(i))
            else:
                self.qtgui_time_sink_x_0.set_line_label(i, labels[i])
            self.qtgui_time_sink_x_0.set_line_width(i, widths[i])
            self.qtgui_time_sink_x_0.set_line_color(i, colors[i])
            self.qtgui_time_sink_x_0.set_line_style(i, styles[i])
            self.qtgui_time_sink_x_0.set_line_marker(i, markers[i])
            self.qtgui_time_sink_x_0.set_line_alpha(i, alphas[i])

        self._qtgui_time_sink_x_0_win = sip.wrapinstance(
            self.qtgui_time_sink_x_0.pyqwidget(), Qt.QWidget)
        self.top_grid_layout.addWidget(self._qtgui_time_sink_x_0_win, 0, 1, 3,
                                       1)
        self.qtgui_freq_sink_x_0_0 = qtgui.freq_sink_c(
            1024,  #size
            firdes.WIN_BLACKMAN_hARRIS,  #wintype
            0,  #fc
            final_rate,  #bw
            "Decimated Channel",  #name
            1  #number of inputs
        )
        self.qtgui_freq_sink_x_0_0.set_update_time(0.10)
        self.qtgui_freq_sink_x_0_0.set_y_axis(-200, -60)
        self.qtgui_freq_sink_x_0_0.set_trigger_mode(qtgui.TRIG_MODE_FREE, 0.0,
                                                    0, "")
        self.qtgui_freq_sink_x_0_0.enable_autoscale(False)
        self.qtgui_freq_sink_x_0_0.enable_grid(False)
        self.qtgui_freq_sink_x_0_0.set_fft_average(1.0)
        self.qtgui_freq_sink_x_0_0.enable_control_panel(False)

        if not True:
            self.qtgui_freq_sink_x_0_0.disable_legend()

        if complex == type(float()):
            self.qtgui_freq_sink_x_0_0.set_plot_pos_half(not True)

        labels = ["", "", "", "", "", "", "", "", "", ""]
        widths = [1, 1, 1, 1, 1, 1, 1, 1, 1, 1]
        colors = [
            "blue", "red", "green", "black", "cyan", "magenta", "yellow",
            "dark red", "dark green", "dark blue"
        ]
        alphas = [1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0]
        for i in xrange(1):
            if len(labels[i]) == 0:
                self.qtgui_freq_sink_x_0_0.set_line_label(
                    i, "Data {0}".format(i))
            else:
                self.qtgui_freq_sink_x_0_0.set_line_label(i, labels[i])
            self.qtgui_freq_sink_x_0_0.set_line_width(i, widths[i])
            self.qtgui_freq_sink_x_0_0.set_line_color(i, colors[i])
            self.qtgui_freq_sink_x_0_0.set_line_alpha(i, alphas[i])

        self._qtgui_freq_sink_x_0_0_win = sip.wrapinstance(
            self.qtgui_freq_sink_x_0_0.pyqwidget(), Qt.QWidget)
        self.top_grid_layout.addWidget(self._qtgui_freq_sink_x_0_0_win, 3, 0,
                                       3, 1)
        self.qtgui_freq_sink_x_0 = qtgui.freq_sink_c(
            fft_length,  #size
            firdes.WIN_BLACKMAN_hARRIS,  #wintype
            144E6,  #fc
            samp_rate,  #bw
            "Spectrum",  #name
            1  #number of inputs
        )
        self.qtgui_freq_sink_x_0.set_update_time(0.10)
        self.qtgui_freq_sink_x_0.set_y_axis(-120, -20)
        self.qtgui_freq_sink_x_0.set_trigger_mode(qtgui.TRIG_MODE_FREE, 0.0, 0,
                                                  "")
        self.qtgui_freq_sink_x_0.enable_autoscale(False)
        self.qtgui_freq_sink_x_0.enable_grid(False)
        self.qtgui_freq_sink_x_0.set_fft_average(1.0)
        self.qtgui_freq_sink_x_0.enable_control_panel(False)

        if not True:
            self.qtgui_freq_sink_x_0.disable_legend()

        if complex == type(float()):
            self.qtgui_freq_sink_x_0.set_plot_pos_half(not True)

        labels = ["", "", "", "", "", "", "", "", "", ""]
        widths = [1, 1, 1, 1, 1, 1, 1, 1, 1, 1]
        colors = [
            "blue", "red", "green", "black", "cyan", "magenta", "yellow",
            "dark red", "dark green", "dark blue"
        ]
        alphas = [1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0]
        for i in xrange(1):
            if len(labels[i]) == 0:
                self.qtgui_freq_sink_x_0.set_line_label(
                    i, "Data {0}".format(i))
            else:
                self.qtgui_freq_sink_x_0.set_line_label(i, labels[i])
            self.qtgui_freq_sink_x_0.set_line_width(i, widths[i])
            self.qtgui_freq_sink_x_0.set_line_color(i, colors[i])
            self.qtgui_freq_sink_x_0.set_line_alpha(i, alphas[i])

        self._qtgui_freq_sink_x_0_win = sip.wrapinstance(
            self.qtgui_freq_sink_x_0.pyqwidget(), Qt.QWidget)
        self.top_grid_layout.addWidget(self._qtgui_freq_sink_x_0_win, 0, 0, 3,
                                       1)
        self.pfb_arb_resampler_xxx_0 = pfb.arb_resampler_fff(
            16E3 / float(final_rate / 5), taps=None, flt_size=32)
        self.pfb_arb_resampler_xxx_0.declare_sample_delay(0)

        self.osmosdr_source_0 = osmosdr.source(args="numchan=" + str(1) + " " +
                                               "uhd")
        self.osmosdr_source_0.set_sample_rate(samp_rate)
        self.osmosdr_source_0.set_center_freq(center_freq, 0)
        self.osmosdr_source_0.set_freq_corr(0, 0)
        self.osmosdr_source_0.set_dc_offset_mode(0, 0)
        self.osmosdr_source_0.set_iq_balance_mode(0, 0)
        self.osmosdr_source_0.set_gain_mode(False, 0)
        self.osmosdr_source_0.set_gain(gain_db, 0)
        self.osmosdr_source_0.set_if_gain(20, 0)
        self.osmosdr_source_0.set_bb_gain(20, 0)
        self.osmosdr_source_0.set_antenna("", 0)
        self.osmosdr_source_0.set_bandwidth(samp_rate * 0.8, 0)

        self.freq_xlating_fir_filter_xxx_0 = filter.freq_xlating_fir_filter_ccc(
            initial_decim, (variable_low_pass_filter_taps_0), demod_bb_freq,
            samp_rate)
        self.fir_filter_xxx_0_1 = filter.fir_filter_fff(
            initial_decim, (variable_low_pass_filter_taps_0))
        self.fir_filter_xxx_0_1.declare_sample_delay(0)
        self.fir_filter_xxx_0_0 = filter.fir_filter_ccc(
            int(samp_rate / 1E6), (variable_low_pass_filter_taps_0))
        self.fir_filter_xxx_0_0.declare_sample_delay(0)
        self.fir_filter_xxx_0 = filter.fir_filter_ccc(
            initial_decim, (variable_low_pass_filter_taps_0))
        self.fir_filter_xxx_0.declare_sample_delay(0)
        self.fft_vxx_0 = fft.fft_vcc(fft_length, True,
                                     (window.blackmanharris(fft_length)), True,
                                     1)
        self.blocks_wavfile_sink_0 = blocks.wavfile_sink(
            file_name, 1, 16000, 8)
        self.blocks_vector_to_stream_0 = blocks.vector_to_stream(
            gr.sizeof_float * 1, fft_length)
        self.blocks_stream_to_vector_0 = blocks.stream_to_vector(
            gr.sizeof_gr_complex * 1, fft_length)
        self.blocks_probe_signal_vx_0 = blocks.probe_signal_vf(fft_length)
        self.blocks_nlog10_ff_0 = blocks.nlog10_ff(10, fft_length, 0)
        self.blocks_keep_one_in_n_0 = blocks.keep_one_in_n(
            gr.sizeof_gr_complex * fft_length,
            int(round(samp_rate / fft_length / 1000)))
        self.blocks_integrate_xx_0 = blocks.integrate_ff(100, fft_length)
        self.blocks_complex_to_mag_squared_0 = blocks.complex_to_mag_squared(
            fft_length)
        self.audio_sink_0 = audio.sink(16000, "", True)
        self.analog_quadrature_demod_cf_0 = analog.quadrature_demod_cf(0.050)
        self.analog_pwr_squelch_xx_0_0 = analog.pwr_squelch_ff(
            -200, 0.1, 0, True)
        self.analog_pwr_squelch_xx_0 = analog.pwr_squelch_cc(
            squelch_dB, 0.1, 0, False)

        ##################################################
        # Connections
        ##################################################
        self.connect((self.analog_pwr_squelch_xx_0, 0),
                     (self.analog_quadrature_demod_cf_0, 0))
        self.connect((self.analog_pwr_squelch_xx_0_0, 0),
                     (self.blocks_wavfile_sink_0, 0))
        self.connect((self.analog_quadrature_demod_cf_0, 0),
                     (self.fir_filter_xxx_0_1, 0))
        self.connect((self.blocks_complex_to_mag_squared_0, 0),
                     (self.blocks_integrate_xx_0, 0))
        self.connect((self.blocks_integrate_xx_0, 0),
                     (self.blocks_nlog10_ff_0, 0))
        self.connect((self.blocks_keep_one_in_n_0, 0), (self.fft_vxx_0, 0))
        self.connect((self.blocks_nlog10_ff_0, 0),
                     (self.blocks_probe_signal_vx_0, 0))
        self.connect((self.blocks_nlog10_ff_0, 0),
                     (self.blocks_vector_to_stream_0, 0))
        self.connect((self.blocks_stream_to_vector_0, 0),
                     (self.blocks_keep_one_in_n_0, 0))
        self.connect((self.blocks_vector_to_stream_0, 0),
                     (self.qtgui_time_sink_x_0, 0))
        self.connect((self.fft_vxx_0, 0),
                     (self.blocks_complex_to_mag_squared_0, 0))
        self.connect((self.fir_filter_xxx_0, 0), (self.fir_filter_xxx_0_0, 0))
        self.connect((self.fir_filter_xxx_0_0, 0),
                     (self.analog_pwr_squelch_xx_0, 0))
        self.connect((self.fir_filter_xxx_0_0, 0),
                     (self.qtgui_freq_sink_x_0_0, 0))
        self.connect((self.fir_filter_xxx_0_1, 0),
                     (self.pfb_arb_resampler_xxx_0, 0))
        self.connect((self.freq_xlating_fir_filter_xxx_0, 0),
                     (self.fir_filter_xxx_0, 0))
        self.connect((self.osmosdr_source_0, 0),
                     (self.blocks_stream_to_vector_0, 0))
        self.connect((self.osmosdr_source_0, 0),
                     (self.freq_xlating_fir_filter_xxx_0, 0))
        self.connect((self.osmosdr_source_0, 0), (self.qtgui_freq_sink_x_0, 0))
        self.connect((self.pfb_arb_resampler_xxx_0, 0),
                     (self.analog_pwr_squelch_xx_0_0, 0))
        self.connect((self.pfb_arb_resampler_xxx_0, 0), (self.audio_sink_0, 0))
Esempio n. 44
0
    def __init__(self):
        grc_wxgui.top_block_gui.__init__(self, title="NBFM Receiver/Deviation Meter")
        _icon_path = "/usr/share/icons/hicolor/32x32/apps/gnuradio-grc.png"
        self.SetIcon(wx.Icon(_icon_path, wx.BITMAP_TYPE_ANY))

        ##################################################
        # Variables
        ##################################################
        self.volume = volume = .4
        self.thresh = thresh = -24
        self.samp_rate = samp_rate = 2.40e6
        self.ramp = ramp = 1
        self.alpha = alpha = .01
        self.RF_Gain = RF_Gain = 50
        self.Freq = Freq = 144.39

        ##################################################
        # Blocks
        ##################################################
        _volume_sizer = wx.BoxSizer(wx.VERTICAL)
        self._volume_text_box = forms.text_box(
        	parent=self.GetWin(),
        	sizer=_volume_sizer,
        	value=self.volume,
        	callback=self.set_volume,
        	label="Volume",
        	converter=forms.float_converter(),
        	proportion=0,
        )
        self._volume_slider = forms.slider(
        	parent=self.GetWin(),
        	sizer=_volume_sizer,
        	value=self.volume,
        	callback=self.set_volume,
        	minimum=0,
        	maximum=3,
        	num_steps=100,
        	style=wx.SL_HORIZONTAL,
        	cast=float,
        	proportion=1,
        )
        self.GridAdd(_volume_sizer, 1, 1, 1, 1)
        _thresh_sizer = wx.BoxSizer(wx.VERTICAL)
        self._thresh_text_box = forms.text_box(
        	parent=self.GetWin(),
        	sizer=_thresh_sizer,
        	value=self.thresh,
        	callback=self.set_thresh,
        	label="Squelch",
        	converter=forms.float_converter(),
        	proportion=0,
        )
        self._thresh_slider = forms.slider(
        	parent=self.GetWin(),
        	sizer=_thresh_sizer,
        	value=self.thresh,
        	callback=self.set_thresh,
        	minimum=-70,
        	maximum=0,
        	num_steps=70,
        	style=wx.SL_HORIZONTAL,
        	cast=float,
        	proportion=1,
        )
        self.GridAdd(_thresh_sizer, 2, 1, 1, 1)
        self._ramp_text_box = forms.text_box(
        	parent=self.GetWin(),
        	value=self.ramp,
        	callback=self.set_ramp,
        	label="Ramp",
        	converter=forms.float_converter(),
        )
        self.GridAdd(self._ramp_text_box, 3, 0, 1, 1)
        self._alpha_text_box = forms.text_box(
        	parent=self.GetWin(),
        	value=self.alpha,
        	callback=self.set_alpha,
        	label="alpha",
        	converter=forms.float_converter(),
        )
        self.GridAdd(self._alpha_text_box, 3, 1, 1, 1)
        _RF_Gain_sizer = wx.BoxSizer(wx.VERTICAL)
        self._RF_Gain_text_box = forms.text_box(
        	parent=self.GetWin(),
        	sizer=_RF_Gain_sizer,
        	value=self.RF_Gain,
        	callback=self.set_RF_Gain,
        	label="RF Gain",
        	converter=forms.float_converter(),
        	proportion=0,
        )
        self._RF_Gain_slider = forms.slider(
        	parent=self.GetWin(),
        	sizer=_RF_Gain_sizer,
        	value=self.RF_Gain,
        	callback=self.set_RF_Gain,
        	minimum=0,
        	maximum=50,
        	num_steps=50,
        	style=wx.SL_HORIZONTAL,
        	cast=float,
        	proportion=1,
        )
        self.GridAdd(_RF_Gain_sizer, 2, 0, 1, 1)
        self._Freq_text_box = forms.text_box(
        	parent=self.GetWin(),
        	value=self.Freq,
        	callback=self.set_Freq,
        	label="Frequency (MHz)",
        	converter=forms.float_converter(),
        )
        self.GridAdd(self._Freq_text_box, 1, 0, 1, 1)
        self.wxgui_scopesink2_0 = scopesink2.scope_sink_f(
        	self.GetWin(),
        	title="Scope Plot",
        	sample_rate=48000,
        	v_scale=2,
        	v_offset=0,
        	t_scale=2e-3,
        	ac_couple=False,
        	xy_mode=False,
        	num_inputs=1,
        	trig_mode=wxgui.TRIG_MODE_AUTO,
        	y_axis_label="KHz Deviation",
        )
        self.GridAdd(self.wxgui_scopesink2_0.win, 0, 0, 1, 1)
        self.single_pole_iir_filter_xx_0 = filter.single_pole_iir_filter_ff(38.55e-3, 1)
        self.rtlsdr_source_0 = osmosdr.source( args="numchan=" + str(1) + " " + "" )
        self.rtlsdr_source_0.set_sample_rate(samp_rate)
        self.rtlsdr_source_0.set_center_freq(Freq*1e6, 0)
        self.rtlsdr_source_0.set_freq_corr(0, 0)
        self.rtlsdr_source_0.set_dc_offset_mode(0, 0)
        self.rtlsdr_source_0.set_iq_balance_mode(0, 0)
        self.rtlsdr_source_0.set_gain_mode(0, 0)
        self.rtlsdr_source_0.set_gain(RF_Gain, 0)
        self.rtlsdr_source_0.set_if_gain(20, 0)
        self.rtlsdr_source_0.set_bb_gain(1, 0)
        self.rtlsdr_source_0.set_antenna("", 0)
        self.rtlsdr_source_0.set_bandwidth(0, 0)

        self.low_pass_filter_0 = filter.fir_filter_ccf(50, firdes.low_pass(
        	1, samp_rate, 7.5e3, 3e3, firdes.WIN_HAMMING, 6.76))
        self.blocks_multiply_const_vxx_0_0 = blocks.multiply_const_vff((6.5, ))
        self.blocks_multiply_const_vxx_0 = blocks.multiply_const_vff((volume, ))
        self.audio_sink_0 = audio.sink(48000, "", True)
        self.analog_pwr_squelch_xx_0 = analog.pwr_squelch_cc(thresh, alpha, ramp, False)
        self.analog_fm_demod_cf_0 = analog.fm_demod_cf(
        	channel_rate=48000,
        	audio_decim=1,
        	deviation=10000,
        	audio_pass=3500,
        	audio_stop=4000,gnu
        	gain=1.0,
        	tau=1e-6,
        )

        ##################################################
        # Connections
        ##################################################
        self.connect((self.rtlsdr_source_0, 0), (self.low_pass_filter_0, 0))
        self.connect((self.low_pass_filter_0, 0), (self.analog_pwr_squelch_xx_0, 0))
        self.connect((self.blocks_multiply_const_vxx_0, 0), (self.audio_sink_0, 0))
        self.connect((self.blocks_multiply_const_vxx_0_0, 0), (self.wxgui_scopesink2_0, 0))
        self.connect((self.analog_pwr_squelch_xx_0, 0), (self.analog_fm_demod_cf_0, 0))
        self.connect((self.analog_fm_demod_cf_0, 0), (self.blocks_multiply_const_vxx_0_0, 0))
        self.connect((self.analog_fm_demod_cf_0, 0), (self.single_pole_iir_filter_xx_0, 0))
        self.connect((self.single_pole_iir_filter_xx_0, 0), (self.blocks_multiply_const_vxx_0, 0))
Esempio n. 45
0
    def __init__(self):
        gr.top_block.__init__(self, "Multimon Flex Rtl 0")

        ##################################################
        # Variables
        ##################################################
        self.samp_rate = samp_rate = 2.4e6
        self.channel_1 = channel_1 = 929.65e6
        self.channel_0 = channel_0 = 929.6e6
        self.xlate_filter_taps = xlate_filter_taps = firdes.low_pass(1, samp_rate, 125000, 25000, firdes.WIN_HAMMING, 6.76)
        self.sqlch = sqlch = -50
        self.if_gain = if_gain = -14
        self.gain = gain = 50
        self.firdes_tap = firdes_tap = firdes.low_pass(1, samp_rate, 125000, 25000, firdes.WIN_HAMMING, 6.76)
        self.corr = corr = -14
        self.center_freq_0 = center_freq_0 = sum([channel_0, channel_1] ) / float(len([channel_0, channel_1]))
        self.bb_gain = bb_gain = 40

        ##################################################
        # Blocks
        ##################################################
        self.osmosdr_source_0 = osmosdr.source( args="numchan=" + str(1) + " " + 'rtl=0' )
        self.osmosdr_source_0.set_sample_rate(samp_rate)
        self.osmosdr_source_0.set_center_freq(center_freq_0 - 100000, 0)
        self.osmosdr_source_0.set_freq_corr(corr, 0)
        self.osmosdr_source_0.set_dc_offset_mode(0, 0)
        self.osmosdr_source_0.set_iq_balance_mode(2, 0)
        self.osmosdr_source_0.set_gain_mode(True, 0)
        self.osmosdr_source_0.set_gain(gain, 0)
        self.osmosdr_source_0.set_if_gain(if_gain, 0)
        self.osmosdr_source_0.set_bb_gain(bb_gain, 0)
        self.osmosdr_source_0.set_antenna('', 0)
        self.osmosdr_source_0.set_bandwidth(0, 0)

        self.low_pass_filter_0_0 = filter.fir_filter_ccf(1, firdes.low_pass(
        	1, 48e3, 6.5e3, 2e3, firdes.WIN_HAMMING, 6.76))
        self.low_pass_filter_0 = filter.fir_filter_ccf(1, firdes.low_pass(
        	1, 48e3, 6.5e3, 2e3, firdes.WIN_HAMMING, 6.76))
        self.freq_xlating_fir_filter_xxx_0_0 = filter.freq_xlating_fir_filter_ccc(int(samp_rate / 48000), (firdes_tap), channel_1 - center_freq_0, samp_rate)
        self.freq_xlating_fir_filter_xxx_0 = filter.freq_xlating_fir_filter_ccc(int(samp_rate / 48000), (firdes_tap), channel_0 - center_freq_0, samp_rate)
        self.blocks_udp_sink_1 = blocks.udp_sink(gr.sizeof_short*1, '127.0.0.1', 7301, 1472, True)
        self.blocks_udp_sink_0 = blocks.udp_sink(gr.sizeof_short*1, '127.0.0.1', 7300, 1472, True)
        self.blocks_multiply_xx_0 = blocks.multiply_vcc(1)
        self.blocks_multiply_const_vxx_0_2 = blocks.multiply_const_vff((0.1, ))
        self.blocks_multiply_const_vxx_0_0_1 = blocks.multiply_const_vff((0.1, ))
        self.blocks_float_to_short_0_1 = blocks.float_to_short(1, 32767)
        self.blocks_float_to_short_0_0 = blocks.float_to_short(1, 32767)
        self.analog_sig_source_x_0 = analog.sig_source_c(samp_rate, analog.GR_COS_WAVE, -100000, 1, 0)
        self.analog_pwr_squelch_xx_0_2 = analog.pwr_squelch_cc(sqlch, 1, 1, True)
        self.analog_pwr_squelch_xx_0_0_1 = analog.pwr_squelch_cc(sqlch, 1, 1, True)
        self.analog_nbfm_rx_0_0 = analog.nbfm_rx(
        	audio_rate=48000,
        	quad_rate=48000,
        	tau=75e-6,
        	max_dev=5000,
          )
        self.analog_nbfm_rx_0 = analog.nbfm_rx(
        	audio_rate=48000,
        	quad_rate=48000,
        	tau=75e-6,
        	max_dev=5000,
          )

        ##################################################
        # Connections
        ##################################################
        self.connect((self.analog_nbfm_rx_0, 0), (self.blocks_multiply_const_vxx_0_2, 0))
        self.connect((self.analog_nbfm_rx_0_0, 0), (self.blocks_multiply_const_vxx_0_0_1, 0))
        self.connect((self.analog_pwr_squelch_xx_0_0_1, 0), (self.low_pass_filter_0_0, 0))
        self.connect((self.analog_pwr_squelch_xx_0_2, 0), (self.low_pass_filter_0, 0))
        self.connect((self.analog_sig_source_x_0, 0), (self.blocks_multiply_xx_0, 1))
        self.connect((self.blocks_float_to_short_0_0, 0), (self.blocks_udp_sink_0, 0))
        self.connect((self.blocks_float_to_short_0_1, 0), (self.blocks_udp_sink_1, 0))
        self.connect((self.blocks_multiply_const_vxx_0_0_1, 0), (self.blocks_float_to_short_0_1, 0))
        self.connect((self.blocks_multiply_const_vxx_0_2, 0), (self.blocks_float_to_short_0_0, 0))
        self.connect((self.blocks_multiply_xx_0, 0), (self.freq_xlating_fir_filter_xxx_0, 0))
        self.connect((self.blocks_multiply_xx_0, 0), (self.freq_xlating_fir_filter_xxx_0_0, 0))
        self.connect((self.freq_xlating_fir_filter_xxx_0, 0), (self.analog_pwr_squelch_xx_0_2, 0))
        self.connect((self.freq_xlating_fir_filter_xxx_0_0, 0), (self.analog_pwr_squelch_xx_0_0_1, 0))
        self.connect((self.low_pass_filter_0, 0), (self.analog_nbfm_rx_0, 0))
        self.connect((self.low_pass_filter_0_0, 0), (self.analog_nbfm_rx_0_0, 0))
        self.connect((self.osmosdr_source_0, 0), (self.blocks_multiply_xx_0, 0))
Esempio n. 46
0
    def __init__(self):
        gr.top_block.__init__(self, "WBFM 2 Channel")
        Qt.QWidget.__init__(self)
        self.setWindowTitle("WBFM 2 Channel")
        try:
             self.setWindowIcon(Qt.QIcon.fromTheme('gnuradio-grc'))
        except:
             pass
        self.top_scroll_layout = Qt.QVBoxLayout()
        self.setLayout(self.top_scroll_layout)
        self.top_scroll = Qt.QScrollArea()
        self.top_scroll.setFrameStyle(Qt.QFrame.NoFrame)
        self.top_scroll_layout.addWidget(self.top_scroll)
        self.top_scroll.setWidgetResizable(True)
        self.top_widget = Qt.QWidget()
        self.top_scroll.setWidget(self.top_widget)
        self.top_layout = Qt.QVBoxLayout(self.top_widget)
        self.top_grid_layout = Qt.QGridLayout()
        self.top_layout.addLayout(self.top_grid_layout)

        self.settings = Qt.QSettings("GNU Radio", "wbfm_2ch")
        self.restoreGeometry(self.settings.value("geometry").toByteArray())

        ##################################################
        # Variables
        ##################################################
        self.radio_freq = radio_freq = 100
        self.samp_rate = samp_rate = 240e4
        self.rf_gain = rf_gain = 10
        self.freq = freq = radio_freq * 1000000
        self.ch2volume = ch2volume = 5
        self.ch2squelch = ch2squelch = -30
        self.ch2mute = ch2mute = 1
        self.ch2freq = ch2freq = radio_freq
        self.ch1volume = ch1volume = 5
        self.ch1squelch = ch1squelch = -30
        self.ch1mute = ch1mute = 1
        self.ch1freq = ch1freq = radio_freq

        ##################################################
        # Blocks
        ##################################################
        self.ch2 = Qt.QTabWidget()
        self.ch2_widget_0 = Qt.QWidget()
        self.ch2_layout_0 = Qt.QBoxLayout(Qt.QBoxLayout.TopToBottom, self.ch2_widget_0)
        self.ch2_grid_layout_0 = Qt.QGridLayout()
        self.ch2_layout_0.addLayout(self.ch2_grid_layout_0)
        self.ch2.addTab(self.ch2_widget_0, "Ch 2")
        self.top_grid_layout.addWidget(self.ch2, 2,1,1,1)
        self.ch1 = Qt.QTabWidget()
        self.ch1_widget_0 = Qt.QWidget()
        self.ch1_layout_0 = Qt.QBoxLayout(Qt.QBoxLayout.TopToBottom, self.ch1_widget_0)
        self.ch1_grid_layout_0 = Qt.QGridLayout()
        self.ch1_layout_0.addLayout(self.ch1_grid_layout_0)
        self.ch1.addTab(self.ch1_widget_0, "Ch 1")
        self.top_grid_layout.addWidget(self.ch1, 2,0,1,1)
        self._rf_gain_range = Range(0, 50, 1, 10, 200)
        self._rf_gain_win = RangeWidget(self._rf_gain_range, self.set_rf_gain, "RF Gain", "counter_slider", float)
        self.top_grid_layout.addWidget(self._rf_gain_win, 1,0,1,2)
        self._ch2volume_range = Range(0, 10, 1, 5, 200)
        self._ch2volume_win = RangeWidget(self._ch2volume_range, self.set_ch2volume, "Ch2 Volume", "counter_slider", float)
        self.ch2_grid_layout_0.addWidget(self._ch2volume_win, 1,0,1,2)
        self._ch2squelch_range = Range(-70, 0, 10, -30, 200)
        self._ch2squelch_win = RangeWidget(self._ch2squelch_range, self.set_ch2squelch, "Ch2 Squelch", "counter_slider", int)
        self.ch2_grid_layout_0.addWidget(self._ch2squelch_win, 2,0,1,2)
        _ch2mute_check_box = Qt.QCheckBox("Mute")
        self._ch2mute_choices = {True: 0, False: 1}
        self._ch2mute_choices_inv = dict((v,k) for k,v in self._ch2mute_choices.iteritems())
        self._ch2mute_callback = lambda i: Qt.QMetaObject.invokeMethod(_ch2mute_check_box, "setChecked", Qt.Q_ARG("bool", self._ch2mute_choices_inv[i]))
        self._ch2mute_callback(self.ch2mute)
        _ch2mute_check_box.stateChanged.connect(lambda i: self.set_ch2mute(self._ch2mute_choices[bool(i)]))
        self.ch2_grid_layout_0.addWidget(_ch2mute_check_box, 0,1,1,1)
        self._ch2freq_tool_bar = Qt.QToolBar(self)
        self._ch2freq_tool_bar.addWidget(Qt.QLabel("Ch2 Freq"+": "))
        self._ch2freq_line_edit = Qt.QLineEdit(str(self.ch2freq))
        self._ch2freq_tool_bar.addWidget(self._ch2freq_line_edit)
        self._ch2freq_line_edit.returnPressed.connect(
        	lambda: self.set_ch2freq(eng_notation.str_to_num(str(self._ch2freq_line_edit.text().toAscii()))))
        self.ch2_grid_layout_0.addWidget(self._ch2freq_tool_bar, 0,0,1,1)
        self._ch1volume_range = Range(0, 10, 1, 5, 200)
        self._ch1volume_win = RangeWidget(self._ch1volume_range, self.set_ch1volume, "Ch1 Volume", "counter_slider", float)
        self.ch1_grid_layout_0.addWidget(self._ch1volume_win, 1,0,1,2)
        self._ch1squelch_range = Range(-70, 0, 10, -30, 200)
        self._ch1squelch_win = RangeWidget(self._ch1squelch_range, self.set_ch1squelch, "Ch1 Squelch", "counter_slider", int)
        self.ch1_grid_layout_0.addWidget(self._ch1squelch_win, 2,0,1,2)
        _ch1mute_check_box = Qt.QCheckBox("Mute")
        self._ch1mute_choices = {True: 0, False: 1}
        self._ch1mute_choices_inv = dict((v,k) for k,v in self._ch1mute_choices.iteritems())
        self._ch1mute_callback = lambda i: Qt.QMetaObject.invokeMethod(_ch1mute_check_box, "setChecked", Qt.Q_ARG("bool", self._ch1mute_choices_inv[i]))
        self._ch1mute_callback(self.ch1mute)
        _ch1mute_check_box.stateChanged.connect(lambda i: self.set_ch1mute(self._ch1mute_choices[bool(i)]))
        self.ch1_grid_layout_0.addWidget(_ch1mute_check_box, 0,1,1,1)
        self._ch1freq_tool_bar = Qt.QToolBar(self)
        self._ch1freq_tool_bar.addWidget(Qt.QLabel("Ch1 Freq"+": "))
        self._ch1freq_line_edit = Qt.QLineEdit(str(self.ch1freq))
        self._ch1freq_tool_bar.addWidget(self._ch1freq_line_edit)
        self._ch1freq_line_edit.returnPressed.connect(
        	lambda: self.set_ch1freq(eng_notation.str_to_num(str(self._ch1freq_line_edit.text().toAscii()))))
        self.ch1_grid_layout_0.addWidget(self._ch1freq_tool_bar, 0,0,1,1)
        self.rtlsdr_source_0 = osmosdr.source( args="numchan=" + str(1) + " " + "" )
        self.rtlsdr_source_0.set_sample_rate(samp_rate)
        self.rtlsdr_source_0.set_center_freq(freq, 0)
        self.rtlsdr_source_0.set_freq_corr(0, 0)
        self.rtlsdr_source_0.set_dc_offset_mode(0, 0)
        self.rtlsdr_source_0.set_iq_balance_mode(0, 0)
        self.rtlsdr_source_0.set_gain_mode(False, 0)
        self.rtlsdr_source_0.set_gain(rf_gain, 0)
        self.rtlsdr_source_0.set_if_gain(20, 0)
        self.rtlsdr_source_0.set_bb_gain(20, 0)
        self.rtlsdr_source_0.set_antenna("", 0)
        self.rtlsdr_source_0.set_bandwidth(0, 0)
          
        self.rational_resampler_xxx_2_0 = filter.rational_resampler_ccc(
                interpolation=400000,
                decimation=2400000,
                taps=None,
                fractional_bw=None,
        )
        self.rational_resampler_xxx_2 = filter.rational_resampler_ccc(
                interpolation=400000,
                decimation=2400000,
                taps=None,
                fractional_bw=None,
        )
        self.rational_resampler_xxx_1_0 = filter.rational_resampler_fff(
                interpolation=48,
                decimation=50,
                taps=None,
                fractional_bw=None,
        )
        self.rational_resampler_xxx_1 = filter.rational_resampler_fff(
                interpolation=48,
                decimation=50,
                taps=None,
                fractional_bw=None,
        )
        self.rational_resampler_xxx_0_0 = filter.rational_resampler_ccc(
                interpolation=500000,
                decimation=2400000,
                taps=None,
                fractional_bw=None,
        )
        self.rational_resampler_xxx_0 = filter.rational_resampler_ccc(
                interpolation=500000,
                decimation=2400000,
                taps=None,
                fractional_bw=None,
        )
        self._radio_freq_tool_bar = Qt.QToolBar(self)
        self._radio_freq_tool_bar.addWidget(Qt.QLabel("Frequency (MHz)"+": "))
        self._radio_freq_line_edit = Qt.QLineEdit(str(self.radio_freq))
        self._radio_freq_tool_bar.addWidget(self._radio_freq_line_edit)
        self._radio_freq_line_edit.returnPressed.connect(
        	lambda: self.set_radio_freq(eng_notation.str_to_num(str(self._radio_freq_line_edit.text().toAscii()))))
        self.top_grid_layout.addWidget(self._radio_freq_tool_bar, 0,0,1,2)
        self.qtgui_waterfall_sink_x_0 = qtgui.waterfall_sink_c(
        	1024, #size
        	firdes.WIN_BLACKMAN_hARRIS, #wintype
        	freq, #fc
        	samp_rate, #bw
        	"", #name
                1 #number of inputs
        )
        self.qtgui_waterfall_sink_x_0.set_update_time(0.10)
        self.qtgui_waterfall_sink_x_0.enable_grid(False)
        
        if not True:
          self.qtgui_waterfall_sink_x_0.disable_legend()
        
        if complex == type(float()):
          self.qtgui_waterfall_sink_x_0.set_plot_pos_half(not True)
        
        labels = ["", "", "", "", "",
                  "", "", "", "", ""]
        colors = [0, 0, 0, 0, 0,
                  0, 0, 0, 0, 0]
        alphas = [1.0, 1.0, 1.0, 1.0, 1.0,
                  1.0, 1.0, 1.0, 1.0, 1.0]
        for i in xrange(1):
            if len(labels[i]) == 0:
                self.qtgui_waterfall_sink_x_0.set_line_label(i, "Data {0}".format(i))
            else:
                self.qtgui_waterfall_sink_x_0.set_line_label(i, labels[i])
            self.qtgui_waterfall_sink_x_0.set_color_map(i, colors[i])
            self.qtgui_waterfall_sink_x_0.set_line_alpha(i, alphas[i])
        
        self.qtgui_waterfall_sink_x_0.set_intensity_range(-100, 10)
        
        self._qtgui_waterfall_sink_x_0_win = sip.wrapinstance(self.qtgui_waterfall_sink_x_0.pyqwidget(), Qt.QWidget)
        self.top_grid_layout.addWidget(self._qtgui_waterfall_sink_x_0_win, 3,0,1,2)
        self.qtgui_freq_sink_x_0_0 = qtgui.freq_sink_c(
        	1024, #size
        	firdes.WIN_BLACKMAN_hARRIS, #wintype
        	ch2freq, #fc
        	400000, #bw
        	"", #name
        	1 #number of inputs
        )
        self.qtgui_freq_sink_x_0_0.set_update_time(0.10)
        self.qtgui_freq_sink_x_0_0.set_y_axis(-100, 10)
        self.qtgui_freq_sink_x_0_0.set_trigger_mode(qtgui.TRIG_MODE_FREE, 0.0, 0, "")
        self.qtgui_freq_sink_x_0_0.enable_autoscale(False)
        self.qtgui_freq_sink_x_0_0.enable_grid(False)
        self.qtgui_freq_sink_x_0_0.set_fft_average(1.0)
        self.qtgui_freq_sink_x_0_0.enable_control_panel(False)
        
        if not False:
          self.qtgui_freq_sink_x_0_0.disable_legend()
        
        if complex == type(float()):
          self.qtgui_freq_sink_x_0_0.set_plot_pos_half(not True)
        
        labels = ["", "", "", "", "",
                  "", "", "", "", ""]
        widths = [1, 1, 1, 1, 1,
                  1, 1, 1, 1, 1]
        colors = ["blue", "red", "green", "black", "cyan",
                  "magenta", "yellow", "dark red", "dark green", "dark blue"]
        alphas = [1.0, 1.0, 1.0, 1.0, 1.0,
                  1.0, 1.0, 1.0, 1.0, 1.0]
        for i in xrange(1):
            if len(labels[i]) == 0:
                self.qtgui_freq_sink_x_0_0.set_line_label(i, "Data {0}".format(i))
            else:
                self.qtgui_freq_sink_x_0_0.set_line_label(i, labels[i])
            self.qtgui_freq_sink_x_0_0.set_line_width(i, widths[i])
            self.qtgui_freq_sink_x_0_0.set_line_color(i, colors[i])
            self.qtgui_freq_sink_x_0_0.set_line_alpha(i, alphas[i])
        
        self._qtgui_freq_sink_x_0_0_win = sip.wrapinstance(self.qtgui_freq_sink_x_0_0.pyqwidget(), Qt.QWidget)
        self.ch2_grid_layout_0.addWidget(self._qtgui_freq_sink_x_0_0_win, 3,0,1,2)
        self.qtgui_freq_sink_x_0 = qtgui.freq_sink_c(
        	1024, #size
        	firdes.WIN_BLACKMAN_hARRIS, #wintype
        	ch1freq, #fc
        	400000, #bw
        	"", #name
        	1 #number of inputs
        )
        self.qtgui_freq_sink_x_0.set_update_time(0.10)
        self.qtgui_freq_sink_x_0.set_y_axis(-100, 10)
        self.qtgui_freq_sink_x_0.set_trigger_mode(qtgui.TRIG_MODE_FREE, 0.0, 0, "")
        self.qtgui_freq_sink_x_0.enable_autoscale(False)
        self.qtgui_freq_sink_x_0.enable_grid(False)
        self.qtgui_freq_sink_x_0.set_fft_average(1.0)
        self.qtgui_freq_sink_x_0.enable_control_panel(False)
        
        if not False:
          self.qtgui_freq_sink_x_0.disable_legend()
        
        if complex == type(float()):
          self.qtgui_freq_sink_x_0.set_plot_pos_half(not True)
        
        labels = ["", "", "", "", "",
                  "", "", "", "", ""]
        widths = [1, 1, 1, 1, 1,
                  1, 1, 1, 1, 1]
        colors = ["blue", "red", "green", "black", "cyan",
                  "magenta", "yellow", "dark red", "dark green", "dark blue"]
        alphas = [1.0, 1.0, 1.0, 1.0, 1.0,
                  1.0, 1.0, 1.0, 1.0, 1.0]
        for i in xrange(1):
            if len(labels[i]) == 0:
                self.qtgui_freq_sink_x_0.set_line_label(i, "Data {0}".format(i))
            else:
                self.qtgui_freq_sink_x_0.set_line_label(i, labels[i])
            self.qtgui_freq_sink_x_0.set_line_width(i, widths[i])
            self.qtgui_freq_sink_x_0.set_line_color(i, colors[i])
            self.qtgui_freq_sink_x_0.set_line_alpha(i, alphas[i])
        
        self._qtgui_freq_sink_x_0_win = sip.wrapinstance(self.qtgui_freq_sink_x_0.pyqwidget(), Qt.QWidget)
        self.ch1_grid_layout_0.addWidget(self._qtgui_freq_sink_x_0_win, 3,0,1,2)
        self.low_pass_filter_0_0 = filter.fir_filter_ccf(1, firdes.low_pass(
        	1, 500000, 100e3, 8000, firdes.WIN_HAMMING, 6.76))
        self.low_pass_filter_0 = filter.fir_filter_ccf(1, firdes.low_pass(
        	1, 500000, 100e3, 8000, firdes.WIN_HAMMING, 6.76))
        self.freq_xlating_fft_filter_ccc_0_0 = filter.freq_xlating_fft_filter_ccc(1, (firdes.low_pass(1,samp_rate,200000,10000)), (ch2freq * 1000000) - freq, samp_rate)
        self.freq_xlating_fft_filter_ccc_0_0.set_nthreads(1)
        self.freq_xlating_fft_filter_ccc_0_0.declare_sample_delay(0)
        self.freq_xlating_fft_filter_ccc_0 = filter.freq_xlating_fft_filter_ccc(1, (firdes.low_pass(1,samp_rate,200000,10000)), (ch1freq * 1000000) - freq, samp_rate)
        self.freq_xlating_fft_filter_ccc_0.set_nthreads(1)
        self.freq_xlating_fft_filter_ccc_0.declare_sample_delay(0)
        self.blocks_multiply_const_vxx_1_0 = blocks.multiply_const_vff((ch2mute, ))
        self.blocks_multiply_const_vxx_1 = blocks.multiply_const_vff((ch1mute, ))
        self.blocks_multiply_const_vxx_0_0 = blocks.multiply_const_vff((ch2volume, ))
        self.blocks_multiply_const_vxx_0 = blocks.multiply_const_vff((ch1volume, ))
        self.audio_sink_0_0 = audio.sink(48000, "", True)
        self.audio_sink_0 = audio.sink(48000, "", True)
        self.analog_wfm_rcv_0_0 = analog.wfm_rcv(
        	quad_rate=500000,
        	audio_decimation=10,
        )
        self.analog_wfm_rcv_0 = analog.wfm_rcv(
        	quad_rate=500000,
        	audio_decimation=10,
        )
        self.analog_pwr_squelch_xx_0_0 = analog.pwr_squelch_cc(ch2squelch, 1e-4, 0, True)
        self.analog_pwr_squelch_xx_0 = analog.pwr_squelch_cc(ch1squelch, 1e-4, 0, True)

        ##################################################
        # Connections
        ##################################################
        self.connect((self.analog_pwr_squelch_xx_0, 0), (self.rational_resampler_xxx_0, 0))    
        self.connect((self.analog_pwr_squelch_xx_0_0, 0), (self.rational_resampler_xxx_0_0, 0))    
        self.connect((self.analog_wfm_rcv_0, 0), (self.rational_resampler_xxx_1, 0))    
        self.connect((self.analog_wfm_rcv_0_0, 0), (self.rational_resampler_xxx_1_0, 0))    
        self.connect((self.blocks_multiply_const_vxx_0, 0), (self.blocks_multiply_const_vxx_1, 0))    
        self.connect((self.blocks_multiply_const_vxx_0_0, 0), (self.blocks_multiply_const_vxx_1_0, 0))    
        self.connect((self.blocks_multiply_const_vxx_1, 0), (self.audio_sink_0, 0))    
        self.connect((self.blocks_multiply_const_vxx_1_0, 0), (self.audio_sink_0_0, 0))    
        self.connect((self.freq_xlating_fft_filter_ccc_0, 0), (self.analog_pwr_squelch_xx_0, 0))    
        self.connect((self.freq_xlating_fft_filter_ccc_0, 0), (self.rational_resampler_xxx_2, 0))    
        self.connect((self.freq_xlating_fft_filter_ccc_0_0, 0), (self.analog_pwr_squelch_xx_0_0, 0))    
        self.connect((self.freq_xlating_fft_filter_ccc_0_0, 0), (self.rational_resampler_xxx_2_0, 0))    
        self.connect((self.low_pass_filter_0, 0), (self.analog_wfm_rcv_0, 0))    
        self.connect((self.low_pass_filter_0_0, 0), (self.analog_wfm_rcv_0_0, 0))    
        self.connect((self.rational_resampler_xxx_0, 0), (self.low_pass_filter_0, 0))    
        self.connect((self.rational_resampler_xxx_0_0, 0), (self.low_pass_filter_0_0, 0))    
        self.connect((self.rational_resampler_xxx_1, 0), (self.blocks_multiply_const_vxx_0, 0))    
        self.connect((self.rational_resampler_xxx_1_0, 0), (self.blocks_multiply_const_vxx_0_0, 0))    
        self.connect((self.rational_resampler_xxx_2, 0), (self.qtgui_freq_sink_x_0, 0))    
        self.connect((self.rational_resampler_xxx_2_0, 0), (self.qtgui_freq_sink_x_0_0, 0))    
        self.connect((self.rtlsdr_source_0, 0), (self.freq_xlating_fft_filter_ccc_0, 0))    
        self.connect((self.rtlsdr_source_0, 0), (self.freq_xlating_fft_filter_ccc_0_0, 0))    
        self.connect((self.rtlsdr_source_0, 0), (self.qtgui_waterfall_sink_x_0, 0))    
    def __init__(self, frame_size=32, puncpat='11'):
        gr.top_block.__init__(self, "Top Block")
        Qt.QWidget.__init__(self)
        self.setWindowTitle("Top Block")
        try:
            self.setWindowIcon(Qt.QIcon.fromTheme('gnuradio-grc'))
        except:
            pass
        self.top_scroll_layout = Qt.QVBoxLayout()
        self.setLayout(self.top_scroll_layout)
        self.top_scroll = Qt.QScrollArea()
        self.top_scroll.setFrameStyle(Qt.QFrame.NoFrame)
        self.top_scroll_layout.addWidget(self.top_scroll)
        self.top_scroll.setWidgetResizable(True)
        self.top_widget = Qt.QWidget()
        self.top_scroll.setWidget(self.top_widget)
        self.top_layout = Qt.QVBoxLayout(self.top_widget)
        self.top_grid_layout = Qt.QGridLayout()
        self.top_layout.addLayout(self.top_grid_layout)

        self.settings = Qt.QSettings("GNU Radio", "top_block")
        self.restoreGeometry(self.settings.value("geometry").toByteArray())

        ##################################################
        # Parameters
        ##################################################
        self.frame_size = frame_size
        self.puncpat = puncpat

        ##################################################
        # Variables
        ##################################################
        self.samples_per_symbol = samples_per_symbol = 64
        self.rate = rate = 2
        self.polys = polys = [79, 109]
        self.k = k = 7
        self.bitrate = bitrate = 9600
        self.samp_rate = samp_rate = samples_per_symbol*bitrate
        self.gain = gain = 50
        
        
        self.dec_cc = dec_cc = fec.cc_decoder.make(frame_size, k, rate, (polys), 0, -1, fec.CC_STREAMING, False)
            
        self.centre_freq = centre_freq = 401e6
        self.bandwidth = bandwidth = 200e3

        ##################################################
        # Blocks
        ##################################################
        self._gain_range = Range(0, 100, 1, 50, 200)
        self._gain_win = RangeWidget(self._gain_range, self.set_gain, "gain", "counter_slider", float)
        self.top_layout.addWidget(self._gain_win)
        self.uhd_usrp_source_0 = uhd.usrp_source(
        	",".join(("", "")),
        	uhd.stream_args(
        		cpu_format="fc32",
        		channels=range(1),
        	),
        )
        self.uhd_usrp_source_0.set_time_unknown_pps(uhd.time_spec())
        self.uhd_usrp_source_0.set_samp_rate(samp_rate)
        self.uhd_usrp_source_0.set_center_freq(centre_freq, 0)
        self.uhd_usrp_source_0.set_gain(gain, 0)
        self.uhd_usrp_source_0.set_bandwidth(bandwidth, 0)
        self.show_text_0 = display.show_text()
        self._show_text_0_win = sip.wrapinstance(self.show_text_0.pyqwidget(), Qt.QWidget)
        self.top_layout.addWidget(self._show_text_0_win)
        self.qtgui_time_sink_x_0 = qtgui.time_sink_f(
        	2048, #size
        	bitrate, #samp_rate
        	"", #name
        	1 #number of inputs
        )
        self.qtgui_time_sink_x_0.set_update_time(0.10)
        self.qtgui_time_sink_x_0.set_y_axis(-128, 128)
        
        self.qtgui_time_sink_x_0.set_y_label("Amplitude", "")
        
        self.qtgui_time_sink_x_0.enable_tags(-1, True)
        self.qtgui_time_sink_x_0.set_trigger_mode(qtgui.TRIG_MODE_FREE, qtgui.TRIG_SLOPE_POS, 0.0, 0, 0, "")
        self.qtgui_time_sink_x_0.enable_autoscale(False)
        self.qtgui_time_sink_x_0.enable_grid(False)
        self.qtgui_time_sink_x_0.enable_axis_labels(True)
        self.qtgui_time_sink_x_0.enable_control_panel(False)
        
        if not True:
          self.qtgui_time_sink_x_0.disable_legend()
        
        labels = ["", "", "", "", "",
                  "", "", "", "", ""]
        widths = [1, 1, 1, 1, 1,
                  1, 1, 1, 1, 1]
        colors = ["blue", "red", "green", "black", "cyan",
                  "magenta", "yellow", "dark red", "dark green", "blue"]
        styles = [1, 1, 1, 1, 1,
                  1, 1, 1, 1, 1]
        markers = [-1, -1, -1, -1, -1,
                   -1, -1, -1, -1, -1]
        alphas = [1.0, 1.0, 1.0, 1.0, 1.0,
                  1.0, 1.0, 1.0, 1.0, 1.0]
        
        for i in xrange(1):
            if len(labels[i]) == 0:
                self.qtgui_time_sink_x_0.set_line_label(i, "Data {0}".format(i))
            else:
                self.qtgui_time_sink_x_0.set_line_label(i, labels[i])
            self.qtgui_time_sink_x_0.set_line_width(i, widths[i])
            self.qtgui_time_sink_x_0.set_line_color(i, colors[i])
            self.qtgui_time_sink_x_0.set_line_style(i, styles[i])
            self.qtgui_time_sink_x_0.set_line_marker(i, markers[i])
            self.qtgui_time_sink_x_0.set_line_alpha(i, alphas[i])
        
        self._qtgui_time_sink_x_0_win = sip.wrapinstance(self.qtgui_time_sink_x_0.pyqwidget(), Qt.QWidget)
        self.top_layout.addWidget(self._qtgui_time_sink_x_0_win)
        self.fosphor_qt_sink_c_0 = fosphor.qt_sink_c()
        self.fosphor_qt_sink_c_0.set_fft_window(window.WIN_BLACKMAN_hARRIS)
        self.fosphor_qt_sink_c_0.set_frequency_range(0, samp_rate)
        self._fosphor_qt_sink_c_0_win = sip.wrapinstance(self.fosphor_qt_sink_c_0.pyqwidget(), Qt.QWidget)
        self.top_layout.addWidget(self._fosphor_qt_sink_c_0_win)
        self.fec_extended_decoder_0 = fec.extended_decoder(decoder_obj_list=dec_cc, threading= None, ann=None, puncpat=puncpat, integration_period=10000)
        self.digital_map_bb_0 = digital.map_bb(([-1, 1]))
        self.digital_gmsk_demod_0 = digital.gmsk_demod(
        	samples_per_symbol=samples_per_symbol,
        	gain_mu=0.175,
        	mu=0.5,
        	omega_relative_limit=0.005,
        	freq_error=0.0,
        	verbose=False,
        	log=False,
        )
        self.ccsds_asm_deframer_0 = ccsds.asm_deframer(0,1,False,16)
        self.blocks_unpacked_to_packed_xx_0 = blocks.unpacked_to_packed_bb(1, gr.GR_MSB_FIRST)
        self.blocks_file_sink_0 = blocks.file_sink(gr.sizeof_char*1, "/home/gs-laptop1/GroundStation/GroundStation/GNURadio/Test Files/Simple GMSK Receive/out.bin", False)
        self.blocks_file_sink_0.set_unbuffered(False)
        self.blocks_char_to_float_0_0 = blocks.char_to_float(1, 1)
        self.blocks_char_to_float_0 = blocks.char_to_float(1, 1)
        self.analog_pwr_squelch_xx_0 = analog.pwr_squelch_cc(-40, 1e-4, 0, True)
        self.ais_invert_0 = ais.invert()

        ##################################################
        # Connections
        ##################################################
        self.connect((self.ais_invert_0, 0), (self.digital_map_bb_0, 0))    
        self.connect((self.analog_pwr_squelch_xx_0, 0), (self.digital_gmsk_demod_0, 0))    
        self.connect((self.blocks_char_to_float_0, 0), (self.qtgui_time_sink_x_0, 0))    
        self.connect((self.blocks_char_to_float_0_0, 0), (self.fec_extended_decoder_0, 0))    
        self.connect((self.blocks_unpacked_to_packed_xx_0, 0), (self.blocks_char_to_float_0, 0))    
        self.connect((self.blocks_unpacked_to_packed_xx_0, 0), (self.blocks_file_sink_0, 0))    
        self.connect((self.ccsds_asm_deframer_0, 0), (self.show_text_0, 0))    
        self.connect((self.digital_gmsk_demod_0, 0), (self.ais_invert_0, 0))    
        self.connect((self.digital_map_bb_0, 0), (self.blocks_char_to_float_0_0, 0))    
        self.connect((self.fec_extended_decoder_0, 0), (self.blocks_unpacked_to_packed_xx_0, 0))    
        self.connect((self.fec_extended_decoder_0, 0), (self.ccsds_asm_deframer_0, 0))    
        self.connect((self.uhd_usrp_source_0, 0), (self.analog_pwr_squelch_xx_0, 0))    
        self.connect((self.uhd_usrp_source_0, 0), (self.fosphor_qt_sink_c_0, 0))    
Esempio n. 48
0
File: am.py Progetto: mr0w1/gnuradio
    def __init__(self):
        gr.top_block.__init__(self, "AM")
        Qt.QWidget.__init__(self)
        self.setWindowTitle("AM")
        try:
             self.setWindowIcon(Qt.QIcon.fromTheme('gnuradio-grc'))
        except:
             pass
        self.top_scroll_layout = Qt.QVBoxLayout()
        self.setLayout(self.top_scroll_layout)
        self.top_scroll = Qt.QScrollArea()
        self.top_scroll.setFrameStyle(Qt.QFrame.NoFrame)
        self.top_scroll_layout.addWidget(self.top_scroll)
        self.top_scroll.setWidgetResizable(True)
        self.top_widget = Qt.QWidget()
        self.top_scroll.setWidget(self.top_widget)
        self.top_layout = Qt.QVBoxLayout(self.top_widget)
        self.top_grid_layout = Qt.QGridLayout()
        self.top_layout.addLayout(self.top_grid_layout)

        self.settings = Qt.QSettings("GNU Radio", "am")
        self.restoreGeometry(self.settings.value("geometry").toByteArray())

        ##################################################
        # Variables
        ##################################################
        self.radio_freq = radio_freq = 100
        self.volume = volume = 5
        self.squelch = squelch = -30
        self.samp_rate = samp_rate = 240e4
        self.rf_gain = rf_gain = 10
        self.freq = freq = radio_freq * 1000000

        ##################################################
        # Blocks
        ##################################################
        self._volume_range = Range(0, 10, 1, 5, 200)
        self._volume_win = RangeWidget(self._volume_range, self.set_volume, "Volume", "counter_slider", float)
        self.top_layout.addWidget(self._volume_win)
        self._squelch_range = Range(-70, 0, 10, -30, 200)
        self._squelch_win = RangeWidget(self._squelch_range, self.set_squelch, "Squelch", "counter_slider", int)
        self.top_layout.addWidget(self._squelch_win)
        self._rf_gain_range = Range(0, 50, 1, 10, 200)
        self._rf_gain_win = RangeWidget(self._rf_gain_range, self.set_rf_gain, "RF Gain", "counter_slider", float)
        self.top_layout.addWidget(self._rf_gain_win)
        self.rtlsdr_source_0 = osmosdr.source( args="numchan=" + str(1) + " " + "" )
        self.rtlsdr_source_0.set_sample_rate(samp_rate)
        self.rtlsdr_source_0.set_center_freq(freq, 0)
        self.rtlsdr_source_0.set_freq_corr(0, 0)
        self.rtlsdr_source_0.set_dc_offset_mode(0, 0)
        self.rtlsdr_source_0.set_iq_balance_mode(0, 0)
        self.rtlsdr_source_0.set_gain_mode(False, 0)
        self.rtlsdr_source_0.set_gain(rf_gain, 0)
        self.rtlsdr_source_0.set_if_gain(20, 0)
        self.rtlsdr_source_0.set_bb_gain(20, 0)
        self.rtlsdr_source_0.set_antenna("", 0)
        self.rtlsdr_source_0.set_bandwidth(0, 0)
          
        self.rational_resampler_xxx_1 = filter.rational_resampler_ccc(
                interpolation=2,
                decimation=75,
                taps=None,
                fractional_bw=None,
        )
        self.rational_resampler_xxx_0 = filter.rational_resampler_fff(
                interpolation=3,
                decimation=4,
                taps=None,
                fractional_bw=None,
        )
        self._radio_freq_tool_bar = Qt.QToolBar(self)
        self._radio_freq_tool_bar.addWidget(Qt.QLabel("Frequency (MHz)"+": "))
        self._radio_freq_line_edit = Qt.QLineEdit(str(self.radio_freq))
        self._radio_freq_tool_bar.addWidget(self._radio_freq_line_edit)
        self._radio_freq_line_edit.returnPressed.connect(
        	lambda: self.set_radio_freq(eng_notation.str_to_num(str(self._radio_freq_line_edit.text().toAscii()))))
        self.top_layout.addWidget(self._radio_freq_tool_bar)
        self.qtgui_waterfall_sink_x_0 = qtgui.waterfall_sink_c(
        	1024, #size
        	firdes.WIN_BLACKMAN_hARRIS, #wintype
        	freq, #fc
        	samp_rate, #bw
        	"", #name
                1 #number of inputs
        )
        self.qtgui_waterfall_sink_x_0.set_update_time(0.10)
        self.qtgui_waterfall_sink_x_0.enable_grid(False)
        
        if not True:
          self.qtgui_waterfall_sink_x_0.disable_legend()
        
        if complex == type(float()):
          self.qtgui_waterfall_sink_x_0.set_plot_pos_half(not True)
        
        labels = ["", "", "", "", "",
                  "", "", "", "", ""]
        colors = [0, 0, 0, 0, 0,
                  0, 0, 0, 0, 0]
        alphas = [1.0, 1.0, 1.0, 1.0, 1.0,
                  1.0, 1.0, 1.0, 1.0, 1.0]
        for i in xrange(1):
            if len(labels[i]) == 0:
                self.qtgui_waterfall_sink_x_0.set_line_label(i, "Data {0}".format(i))
            else:
                self.qtgui_waterfall_sink_x_0.set_line_label(i, labels[i])
            self.qtgui_waterfall_sink_x_0.set_color_map(i, colors[i])
            self.qtgui_waterfall_sink_x_0.set_line_alpha(i, alphas[i])
        
        self.qtgui_waterfall_sink_x_0.set_intensity_range(-140, 10)
        
        self._qtgui_waterfall_sink_x_0_win = sip.wrapinstance(self.qtgui_waterfall_sink_x_0.pyqwidget(), Qt.QWidget)
        self.top_layout.addWidget(self._qtgui_waterfall_sink_x_0_win)
        self.qtgui_freq_sink_x_0 = qtgui.freq_sink_c(
        	1024, #size
        	firdes.WIN_BLACKMAN_hARRIS, #wintype
        	freq, #fc
        	samp_rate, #bw
        	"", #name
        	1 #number of inputs
        )
        self.qtgui_freq_sink_x_0.set_update_time(0.10)
        self.qtgui_freq_sink_x_0.set_y_axis(-140, 10)
        self.qtgui_freq_sink_x_0.set_trigger_mode(qtgui.TRIG_MODE_FREE, 0.0, 0, "")
        self.qtgui_freq_sink_x_0.enable_autoscale(False)
        self.qtgui_freq_sink_x_0.enable_grid(False)
        self.qtgui_freq_sink_x_0.set_fft_average(1.0)
        self.qtgui_freq_sink_x_0.enable_control_panel(False)
        
        if not True:
          self.qtgui_freq_sink_x_0.disable_legend()
        
        if complex == type(float()):
          self.qtgui_freq_sink_x_0.set_plot_pos_half(not True)
        
        labels = ["", "", "", "", "",
                  "", "", "", "", ""]
        widths = [1, 1, 1, 1, 1,
                  1, 1, 1, 1, 1]
        colors = ["blue", "red", "green", "black", "cyan",
                  "magenta", "yellow", "dark red", "dark green", "dark blue"]
        alphas = [1.0, 1.0, 1.0, 1.0, 1.0,
                  1.0, 1.0, 1.0, 1.0, 1.0]
        for i in xrange(1):
            if len(labels[i]) == 0:
                self.qtgui_freq_sink_x_0.set_line_label(i, "Data {0}".format(i))
            else:
                self.qtgui_freq_sink_x_0.set_line_label(i, labels[i])
            self.qtgui_freq_sink_x_0.set_line_width(i, widths[i])
            self.qtgui_freq_sink_x_0.set_line_color(i, colors[i])
            self.qtgui_freq_sink_x_0.set_line_alpha(i, alphas[i])
        
        self._qtgui_freq_sink_x_0_win = sip.wrapinstance(self.qtgui_freq_sink_x_0.pyqwidget(), Qt.QWidget)
        self.top_layout.addWidget(self._qtgui_freq_sink_x_0_win)
        self.low_pass_filter_0 = filter.fir_filter_ccf(1, firdes.low_pass(
        	1, 64000, 5000, 100, firdes.WIN_HAMMING, 6.76))
        self.blocks_multiply_const_vxx_0 = blocks.multiply_const_vff((volume, ))
        self.blocks_complex_to_mag_0 = blocks.complex_to_mag(1)
        self.audio_sink_0 = audio.sink(48000, "", True)
        self.analog_pwr_squelch_xx_0 = analog.pwr_squelch_cc(squelch, 1e-4, 0, True)
        self.analog_agc2_xx_0 = analog.agc2_ff(6.25e-4, 1e-5, .2, 1.0)
        self.analog_agc2_xx_0.set_max_gain(65536)

        ##################################################
        # Connections
        ##################################################
        self.connect((self.analog_agc2_xx_0, 0), (self.rational_resampler_xxx_0, 0))    
        self.connect((self.analog_pwr_squelch_xx_0, 0), (self.rational_resampler_xxx_1, 0))    
        self.connect((self.blocks_complex_to_mag_0, 0), (self.analog_agc2_xx_0, 0))    
        self.connect((self.blocks_multiply_const_vxx_0, 0), (self.audio_sink_0, 0))    
        self.connect((self.low_pass_filter_0, 0), (self.blocks_complex_to_mag_0, 0))    
        self.connect((self.rational_resampler_xxx_0, 0), (self.blocks_multiply_const_vxx_0, 0))    
        self.connect((self.rational_resampler_xxx_1, 0), (self.low_pass_filter_0, 0))    
        self.connect((self.rtlsdr_source_0, 0), (self.analog_pwr_squelch_xx_0, 0))    
        self.connect((self.rtlsdr_source_0, 0), (self.qtgui_freq_sink_x_0, 0))    
        self.connect((self.rtlsdr_source_0, 0), (self.qtgui_waterfall_sink_x_0, 0))    
    def __init__(self, FH_seq):
        #gr.top_block.__init__(self, "Test2")
        grc_wxgui.top_block_gui.__init__(self, title="Follow_with_single_usrp")
        _icon_path = "/usr/share/icons/hicolor/32x32/apps/gnuradio-grc.png"
        self.SetIcon(wx.Icon(_icon_path, wx.BITMAP_TYPE_ANY))

        ##################################################
        # Variables
        ##################################################
        self.sql_on = sql_on = 0
        self.samp_rate = samp_rate = 2e6
        self.curr_chann_idx = 0
        self.FH_seq = FH_seq
        self.inception = 0

        self.loop_bw_carriertracking = math.pi / 200.0

        self.maxf_carriertracking = 0.5
        self.minf_carriertracking = -0.5

        ##################################################
        # Blocks
        ##################################################
        self.wxgui_scopesink2_0 = scopesink2.scope_sink_c(
            self.GetWin(),
            title="Scope Plot",
            sample_rate=samp_rate,
            v_scale=0,
            v_offset=0,
            t_scale=0,
            ac_couple=False,
            xy_mode=False,
            num_inputs=1,
            trig_mode=wxgui.TRIG_MODE_AUTO,
            y_axis_label="Counts",
        )
        self.Add(self.wxgui_scopesink2_0.win)
        self.pll_carriertracker = analog.pll_carriertracking_cc(
            self.loop_bw_carriertracking, self.maxf_carriertracking,
            self.minf_carriertracking)
        self.analog_pwr_squelch_xx_1 = analog.pwr_squelch_cc(-25, 1, 25, False)
        self.uhd_usrp_source_0 = uhd.usrp_source(
            device_addr="addr=192.168.10.2",
            stream_args=uhd.stream_args(
                cpu_format="fc32",
                channels=range(1),
            ),
        )
        self.uhd_usrp_source_0.set_samp_rate(samp_rate)
        self.uhd_usrp_source_0.set_center_freq(2.43064e9, 0)
        self.uhd_usrp_source_0.set_gain(0, 0)
        self.uhd_usrp_source_0.set_antenna("RX2", 0)

        def _sql_on_probe():
            while True:
                val = self.analog_pwr_squelch_xx_1.unmuted()
                try:
                    self.set_sql_on(val)
                except AttributeError, e:
                    pass
                time.sleep((0.001))
Esempio n. 50
0
    def __init__(self, antenna="TX/RX", vor_freq_1=111e6, com_freq_1=135.275e6, vor_freq_2=111e6, rx_gain=30, gain=20):
        grc_wxgui.top_block_gui.__init__(self, title="Top Block")

        ##################################################
        # Parameters
        ##################################################
        self.antenna = antenna
        self.vor_freq_1 = vor_freq_1
        self.com_freq_1 = com_freq_1
        self.vor_freq_2 = vor_freq_2
        self.rx_gain = rx_gain
        self.gain = gain

        ##################################################
        # Variables
        ##################################################
        self.obs_decimation = obs_decimation = 25
        self.ils_decimation = ils_decimation = 50
        self.am_sample_rate = am_sample_rate = 12.5e3
        self.vor_samp_rate = vor_samp_rate = 250e3
        self.vor_freq_entry_2 = vor_freq_entry_2 = vor_freq_2
        self.vor_freq_entry_1 = vor_freq_entry_1 = vor_freq_1
        self.vor_center_freq_0 = vor_center_freq_0 = (117.95e6-108.00e6)/2+117.95e6
        self.vor_center_freq = vor_center_freq = (117.95e6-108.00e6)/2+117.95e6
        self.squelch_slider = squelch_slider = -110
        self.rxgain = rxgain = 15
        self.phase_correction = phase_correction = 5
        self.obs_sample_rate = obs_sample_rate = am_sample_rate/obs_decimation
        self.ils_sample_rate = ils_sample_rate = am_sample_rate/ils_decimation
        self.gain_slider = gain_slider = gain
        self.com_freq_entry_1 = com_freq_entry_1 = com_freq_1
        self.band_center_freq = band_center_freq = (136.975e6-108.0e6)/2+108.0e6
        self.audio_select = audio_select = 0
        self.audio_sample_rate = audio_sample_rate = 48e3
        self.am_decimation = am_decimation = 1

        ##################################################
        # Blocks
        ##################################################
        self.notebook_0 = self.notebook_0 = wx.Notebook(self.GetWin(), style=wx.NB_TOP)
        self.notebook_0.AddPage(grc_wxgui.Panel(self.notebook_0), "RF Analyzer")
        self.notebook_0.AddPage(grc_wxgui.Panel(self.notebook_0), "Channel FFT")
        self.notebook_0.AddPage(grc_wxgui.Panel(self.notebook_0), "Demod Audio FFT")
        self.notebook_0.AddPage(grc_wxgui.Panel(self.notebook_0), "Ref and Phase Scope")
        self.notebook_0.AddPage(grc_wxgui.Panel(self.notebook_0), "Manipulated Ref and Phase")
        self.Add(self.notebook_0)
        self._vor_freq_entry_1_text_box = forms.text_box(
        	parent=self.notebook_0.GetPage(0).GetWin(),
        	value=self.vor_freq_entry_1,
        	callback=self.set_vor_freq_entry_1,
        	label='vor_freq_entry_1',
        	converter=forms.float_converter(),
        )
        self.notebook_0.GetPage(0).Add(self._vor_freq_entry_1_text_box)
        _gain_slider_sizer = wx.BoxSizer(wx.VERTICAL)
        self._gain_slider_text_box = forms.text_box(
        	parent=self.notebook_0.GetPage(0).GetWin(),
        	sizer=_gain_slider_sizer,
        	value=self.gain_slider,
        	callback=self.set_gain_slider,
        	label='gain_slider',
        	converter=forms.float_converter(),
        	proportion=0,
        )
        self._gain_slider_slider = forms.slider(
        	parent=self.notebook_0.GetPage(0).GetWin(),
        	sizer=_gain_slider_sizer,
        	value=self.gain_slider,
        	callback=self.set_gain_slider,
        	minimum=0,
        	maximum=30,
        	num_steps=100,
        	style=wx.SL_HORIZONTAL,
        	cast=float,
        	proportion=1,
        )
        self.notebook_0.GetPage(0).Add(_gain_slider_sizer)
        self._com_freq_entry_1_text_box = forms.text_box(
        	parent=self.notebook_0.GetPage(0).GetWin(),
        	value=self.com_freq_entry_1,
        	callback=self.set_com_freq_entry_1,
        	label='com_freq_entry_1',
        	converter=forms.float_converter(),
        )
        self.notebook_0.GetPage(0).Add(self._com_freq_entry_1_text_box)
        self.wxgui_scopesink2_0 = scopesink2.scope_sink_f(
        	self.notebook_0.GetPage(1).GetWin(),
        	title="Scope Plot",
        	sample_rate=10e3,
        	v_scale=0,
        	v_offset=0,
        	t_scale=0,
        	ac_couple=False,
        	xy_mode=False,
        	num_inputs=2,
        	trig_mode=wxgui.TRIG_MODE_AUTO,
        	y_axis_label="Counts",
        )
        self.notebook_0.GetPage(1).Add(self.wxgui_scopesink2_0.win)
        self.wxgui_numbersink2_0 = numbersink2.number_sink_f(
        	self.GetWin(),
        	unit="Units",
        	minval=-100,
        	maxval=100,
        	factor=1.0,
        	decimal_places=10,
        	ref_level=0,
        	sample_rate=10,
        	number_rate=15,
        	average=False,
        	avg_alpha=None,
        	label="Number Plot",
        	peak_hold=False,
        	show_gauge=True,
        )
        self.Add(self.wxgui_numbersink2_0.win)
        self.wxgui_fftsink2_0 = fftsink2.fft_sink_c(
        	self.notebook_0.GetPage(0).GetWin(),
        	baseband_freq=0,
        	y_per_div=10,
        	y_divs=10,
        	ref_level=0,
        	ref_scale=2.0,
        	sample_rate=12.5e3,
        	fft_size=1024,
        	fft_rate=5,
        	average=False,
        	avg_alpha=None,
        	title="FFT Plot",
        	peak_hold=False,
        )
        self.notebook_0.GetPage(0).Add(self.wxgui_fftsink2_0.win)
        self._vor_freq_entry_2_text_box = forms.text_box(
        	parent=self.notebook_0.GetPage(0).GetWin(),
        	value=self.vor_freq_entry_2,
        	callback=self.set_vor_freq_entry_2,
        	label='vor_freq_entry_2',
        	converter=forms.float_converter(),
        )
        self.notebook_0.GetPage(0).Add(self._vor_freq_entry_2_text_box)
        self.uhd_usrp_source_0 = uhd.usrp_source(
        	device_addr="",
        	stream_args=uhd.stream_args(
        		cpu_format="fc32",
        		channels=range(2),
        	),
        )
        self.uhd_usrp_source_0.set_subdev_spec("A:0 A:0", 0)
        self.uhd_usrp_source_0.set_samp_rate(vor_samp_rate)
        self.uhd_usrp_source_0.set_center_freq(uhd.tune_request(com_freq_entry_1,rf_freq=band_center_freq, rf_freq_policy=uhd.tune_request.POLICY_MANUAL), 0)
        self.uhd_usrp_source_0.set_gain(gain_slider, 0)
        self.uhd_usrp_source_0.set_antenna("TX/RX", 0)
        self.uhd_usrp_source_0.set_center_freq(uhd.tune_request(vor_freq_entry_1, rf_freq=band_center_freq, rf_freq_policy=uhd.tune_request.POLICY_MANUAL), 1)
        self.uhd_usrp_source_0.set_gain(gain_slider, 1)
        self.uhd_usrp_source_0.set_antenna("TX/RX", 1)
        self.uhd_usrp_sink_0 = uhd.usrp_sink(
        	device_addr="",
        	stream_args=uhd.stream_args(
        		cpu_format="fc32",
        		channels=range(1),
        	),
        )
        self.uhd_usrp_sink_0.set_samp_rate(250e3)
        self.uhd_usrp_sink_0.set_center_freq(uhd.tune_request(com_freq_entry_1,20e6), 0)
        self.uhd_usrp_sink_0.set_gain(15, 0)
        self.uhd_usrp_sink_0.set_antenna("TX/RX", 0)
        _squelch_slider_sizer = wx.BoxSizer(wx.VERTICAL)
        self._squelch_slider_text_box = forms.text_box(
        	parent=self.notebook_0.GetPage(0).GetWin(),
        	sizer=_squelch_slider_sizer,
        	value=self.squelch_slider,
        	callback=self.set_squelch_slider,
        	label='squelch_slider',
        	converter=forms.float_converter(),
        	proportion=0,
        )
        self._squelch_slider_slider = forms.slider(
        	parent=self.notebook_0.GetPage(0).GetWin(),
        	sizer=_squelch_slider_sizer,
        	value=self.squelch_slider,
        	callback=self.set_squelch_slider,
        	minimum=-110,
        	maximum=0,
        	num_steps=100,
        	style=wx.SL_HORIZONTAL,
        	cast=float,
        	proportion=1,
        )
        self.notebook_0.GetPage(0).Add(_squelch_slider_sizer)
        self.squelch = analog.pwr_squelch_cc(squelch_slider, 0.01, 20, True)
        self.rational_resampler_xxx_2 = filter.rational_resampler_fff(
                interpolation=250,
                decimation=48,
                taps=None,
                fractional_bw=None,
        )
        self.rational_resampler_xxx_1 = filter.rational_resampler_fff(
                interpolation=480,
                decimation=125,
                taps=None,
                fractional_bw=None,
        )
        self.rational_resampler_xxx_0 = filter.rational_resampler_ccc(
                interpolation=4,
                decimation=5,
                taps=None,
                fractional_bw=None,
        )
        self.openavionics_joystick_interface_0 = openavionics.joystick_interface()
        self.openavionics_audio_ptt_0 = openavionics.audio_ptt()
        self.null_sink_0_0_0 = blocks.null_sink(gr.sizeof_gr_complex*1)
        self.null_sink_0_0 = blocks.null_sink(gr.sizeof_gr_complex*1)
        self.multiply_xx_0_0_0 = blocks.multiply_vcc(1)
        self.multiply_xx_0_0 = blocks.multiply_vff(1)
        self.low_pass_filter_3 = filter.fir_filter_ccf(1, firdes.low_pass(
        	1, 10e3, 1, 2, firdes.WIN_HAMMING, 6.76))
        self.low_pass_filter_2_0_0 = filter.fir_filter_ccf(5, firdes.low_pass(
        	1, 40e3, 2e3, 1e3, firdes.WIN_HAMMING, 6.76))
        self.low_pass_filter_2_0 = filter.fir_filter_ccf(5, firdes.low_pass(
        	1, 40e3, 2e3, 1e3, firdes.WIN_HAMMING, 6.76))
        self.low_pass_filter_2 = filter.fir_filter_ccf(5, firdes.low_pass(
        	1, vor_samp_rate, 15e3, 5e3, firdes.WIN_HAMMING, 6.76))
        self.low_pass_filter_1 = filter.interp_fir_filter_fff(1, firdes.low_pass(
        	1, 12.5e3, 3e3, 1e3, firdes.WIN_HAMMING, 6.76))
        self.low_pass_filter_0 = filter.fir_filter_ccf(int(250e3/12.5e3), firdes.low_pass(
        	1, vor_samp_rate, 10e3, 1e3, firdes.WIN_HAMMING, 6.76))
        self.goertzel_fc_0_0 = fft.goertzel_fc(10000, 1000, 30)
        self.goertzel_fc_0 = fft.goertzel_fc(40000, 4000, 30)
        self.float_to_complex_0_0 = blocks.float_to_complex(1)
        self.const_source_x_0_0_0 = analog.sig_source_c(0, analog.GR_CONST_WAVE, 0, 0, 0.450)
        self.const_source_x_0_0 = analog.sig_source_f(0, analog.GR_CONST_WAVE, 0, 0, 0.550)
        self.const_source_x_0 = analog.sig_source_f(0, analog.GR_CONST_WAVE, 0, 0, 0.450)
        self.blocks_multiply_xx_0 = blocks.multiply_vcc(1)
        self.blocks_multiply_conjugate_cc_0 = blocks.multiply_conjugate_cc(1)
        self.blocks_complex_to_arg_0 = blocks.complex_to_arg(1)
        self.blocks_add_const_vxx_0 = blocks.add_const_vff((-87.2665e-3, ))
        self.band_pass_filter_0_0 = filter.fir_filter_fff(4, firdes.band_pass(
        	1, 40e3, 20, 40, 20, firdes.WIN_HAMMING, 6.76))
        self.band_pass_filter_0 = filter.fir_filter_fff(1, firdes.band_pass(
        	1, 10e3, 20, 40, 20, firdes.WIN_HAMMING, 6.76))
        self.audio_source_0 = audio.source(48000, "", True)
        self.audio_sink_0 = audio.sink(int(audio_sample_rate), "", True)
        self._audio_select_chooser = forms.drop_down(
        	parent=self.GetWin(),
        	value=self.audio_select,
        	callback=self.set_audio_select,
        	label='audio_select',
        	choices=[0, 1],
        	labels=['AM Voice','VOR Subcarrier'],
        )
        self.Add(self._audio_select_chooser)
        self.analog_sig_source_x_0 = analog.sig_source_c(40e3, analog.GR_COS_WAVE, -9.96e3, 1, 0)
        self.analog_quadrature_demod_cf_0 = analog.quadrature_demod_cf(1)
        self.analog_am_demod_cf_0 = analog.am_demod_cf(
        	channel_rate=40e3,
        	audio_decim=4,
        	audio_pass=5000,
        	audio_stop=5500,
        )
        self.analog_agc2_xx_0_1_0 = analog.agc2_ff(1e-1, 1e-2, 1.0, 1.0)
        self.analog_agc2_xx_0_1_0.set_max_gain(100)
        self.analog_agc2_xx_0_1 = analog.agc2_ff(1e-1, 1e-2, 1.0, 1.0)
        self.analog_agc2_xx_0_1.set_max_gain(100)
        self.analog_agc2_xx_0_0 = analog.agc2_cc(1e-1, 1e-2, 1.0, 1.0)
        self.analog_agc2_xx_0_0.set_max_gain(100)
        self.analog_agc2_xx_0 = analog.agc2_cc(1e-1, 1e-2, 1.0, 1.0)
        self.analog_agc2_xx_0.set_max_gain(100)
        self.am_demod_cf_0 = analog.am_demod_cf(
        	channel_rate=am_sample_rate,
        	audio_decim=am_decimation,
        	audio_pass=3e3,
        	audio_stop=4e3,
        )
        self.agc2_xx_0 = analog.agc2_cc(1, 1, 0.75, 1.0)
        self.agc2_xx_0.set_max_gain(0.0)
        self.add_xx_0_0 = blocks.add_vff(1)

        ##################################################
        # Connections
        ##################################################
        self.connect((self.agc2_xx_0, 0), (self.am_demod_cf_0, 0))
        self.connect((self.am_demod_cf_0, 0), (self.low_pass_filter_1, 0))
        self.connect((self.agc2_xx_0, 0), (self.wxgui_fftsink2_0, 0))
        self.connect((self.multiply_xx_0_0, 0), (self.add_xx_0_0, 0))
        self.connect((self.const_source_x_0, 0), (self.multiply_xx_0_0, 1))
        self.connect((self.const_source_x_0_0, 0), (self.add_xx_0_0, 1))
        self.connect((self.multiply_xx_0_0_0, 0), (self.uhd_usrp_sink_0, 0))
        self.connect((self.add_xx_0_0, 0), (self.float_to_complex_0_0, 0))
        self.connect((self.add_xx_0_0, 0), (self.float_to_complex_0_0, 1))
        self.connect((self.float_to_complex_0_0, 0), (self.multiply_xx_0_0_0, 0))
        self.connect((self.const_source_x_0_0_0, 0), (self.multiply_xx_0_0_0, 1))
        self.connect((self.uhd_usrp_source_0, 0), (self.null_sink_0_0_0, 0))
        self.connect((self.uhd_usrp_source_0, 0), (self.low_pass_filter_0, 0))
        self.connect((self.low_pass_filter_1, 0), (self.rational_resampler_xxx_1, 0))
        self.connect((self.rational_resampler_xxx_1, 0), (self.audio_sink_0, 0))
        self.connect((self.analog_agc2_xx_0_1_0, 0), (self.wxgui_scopesink2_0, 1))
        self.connect((self.analog_agc2_xx_0_1, 0), (self.wxgui_scopesink2_0, 0))
        self.connect((self.band_pass_filter_0, 0), (self.analog_agc2_xx_0_1, 0))
        self.connect((self.band_pass_filter_0_0, 0), (self.analog_agc2_xx_0_1_0, 0))
        self.connect((self.analog_quadrature_demod_cf_0, 0), (self.band_pass_filter_0_0, 0))
        self.connect((self.analog_quadrature_demod_cf_0, 0), (self.goertzel_fc_0, 0))
        self.connect((self.analog_am_demod_cf_0, 0), (self.band_pass_filter_0, 0))
        self.connect((self.blocks_add_const_vxx_0, 0), (self.wxgui_numbersink2_0, 0))
        self.connect((self.blocks_complex_to_arg_0, 0), (self.blocks_add_const_vxx_0, 0))
        self.connect((self.low_pass_filter_3, 0), (self.blocks_complex_to_arg_0, 0))
        self.connect((self.blocks_multiply_conjugate_cc_0, 0), (self.low_pass_filter_3, 0))
        self.connect((self.analog_agc2_xx_0, 0), (self.blocks_multiply_conjugate_cc_0, 1))
        self.connect((self.analog_agc2_xx_0_0, 0), (self.blocks_multiply_conjugate_cc_0, 0))
        self.connect((self.goertzel_fc_0_0, 0), (self.analog_agc2_xx_0_0, 0))
        self.connect((self.analog_am_demod_cf_0, 0), (self.goertzel_fc_0_0, 0))
        self.connect((self.goertzel_fc_0, 0), (self.analog_agc2_xx_0, 0))
        self.connect((self.low_pass_filter_2_0_0, 0), (self.analog_am_demod_cf_0, 0))
        self.connect((self.rational_resampler_xxx_0, 0), (self.low_pass_filter_2_0_0, 0))
        self.connect((self.low_pass_filter_2_0, 0), (self.analog_quadrature_demod_cf_0, 0))
        self.connect((self.analog_sig_source_x_0, 0), (self.blocks_multiply_xx_0, 1))
        self.connect((self.blocks_multiply_xx_0, 0), (self.low_pass_filter_2_0, 0))
        self.connect((self.rational_resampler_xxx_0, 0), (self.blocks_multiply_xx_0, 0))
        self.connect((self.uhd_usrp_source_0, 1), (self.null_sink_0_0, 0))
        self.connect((self.low_pass_filter_2, 0), (self.rational_resampler_xxx_0, 0))
        self.connect((self.audio_source_0, 0), (self.openavionics_audio_ptt_0, 0))
        self.connect((self.openavionics_audio_ptt_0, 0), (self.rational_resampler_xxx_2, 0))
        self.connect((self.rational_resampler_xxx_2, 0), (self.multiply_xx_0_0, 0))
        self.connect((self.squelch, 0), (self.agc2_xx_0, 0))
        self.connect((self.low_pass_filter_0, 0), (self.squelch, 0))
        self.connect((self.uhd_usrp_source_0, 0), (self.low_pass_filter_2, 0))

        ##################################################
        # Asynch Message Connections
        ##################################################
        self.msg_connect(self.openavionics_joystick_interface_0, "out", self.openavionics_audio_ptt_0, "in2")
Esempio n. 51
0
    def __init__(self):
        grc_wxgui.top_block_gui.__init__(self, title="air band receiver")
        _icon_path = "C:\Program Files\GNURadio-3.7\share\icons\hicolor\scalable/apps\gnuradio-grc.png"
        self.SetIcon(wx.Icon(_icon_path, wx.BITMAP_TYPE_ANY))

        ##################################################
        # Variables
        ##################################################
        self.volume = volume = 1
        self.sql = sql = 0
        self.samp_rate = samp_rate = 2.4e6
        self.rfgain = rfgain = 50
        self.frq_corr = frq_corr = 30
        self.base_freq = base_freq = 120.5e6

        ##################################################
        # Blocks
        ##################################################
        _volume_sizer = wx.BoxSizer(wx.VERTICAL)
        self._volume_text_box = forms.text_box(
            parent=self.GetWin(),
            sizer=_volume_sizer,
            value=self.volume,
            callback=self.set_volume,
            label='Volume',
            converter=forms.float_converter(),
            proportion=0,
        )
        self._volume_slider = forms.slider(
            parent=self.GetWin(),
            sizer=_volume_sizer,
            value=self.volume,
            callback=self.set_volume,
            minimum=0,
            maximum=1,
            num_steps=100,
            style=wx.SL_HORIZONTAL,
            cast=float,
            proportion=1,
        )
        self.Add(_volume_sizer)
        _sql_sizer = wx.BoxSizer(wx.VERTICAL)
        self._sql_text_box = forms.text_box(
            parent=self.GetWin(),
            sizer=_sql_sizer,
            value=self.sql,
            callback=self.set_sql,
            label='Squelch',
            converter=forms.float_converter(),
            proportion=0,
        )
        self._sql_slider = forms.slider(
            parent=self.GetWin(),
            sizer=_sql_sizer,
            value=self.sql,
            callback=self.set_sql,
            minimum=-100,
            maximum=100,
            num_steps=1000,
            style=wx.SL_HORIZONTAL,
            cast=float,
            proportion=1,
        )
        self.Add(_sql_sizer)
        _rfgain_sizer = wx.BoxSizer(wx.VERTICAL)
        self._rfgain_text_box = forms.text_box(
            parent=self.GetWin(),
            sizer=_rfgain_sizer,
            value=self.rfgain,
            callback=self.set_rfgain,
            label='RF_Gain',
            converter=forms.float_converter(),
            proportion=0,
        )
        self._rfgain_slider = forms.slider(
            parent=self.GetWin(),
            sizer=_rfgain_sizer,
            value=self.rfgain,
            callback=self.set_rfgain,
            minimum=0,
            maximum=50,
            num_steps=100,
            style=wx.SL_HORIZONTAL,
            cast=float,
            proportion=1,
        )
        self.Add(_rfgain_sizer)
        _frq_corr_sizer = wx.BoxSizer(wx.VERTICAL)
        self._frq_corr_text_box = forms.text_box(
            parent=self.GetWin(),
            sizer=_frq_corr_sizer,
            value=self.frq_corr,
            callback=self.set_frq_corr,
            label='freq_correction(ppm)',
            converter=forms.float_converter(),
            proportion=0,
        )
        self._frq_corr_slider = forms.slider(
            parent=self.GetWin(),
            sizer=_frq_corr_sizer,
            value=self.frq_corr,
            callback=self.set_frq_corr,
            minimum=-127,
            maximum=127,
            num_steps=254,
            style=wx.SL_HORIZONTAL,
            cast=float,
            proportion=1,
        )
        self.Add(_frq_corr_sizer)
        self.wxgui_fftsink2_0_0_0 = fftsink2.fft_sink_c(
            self.GetWin(),
            baseband_freq=0,
            y_per_div=10,
            y_divs=10,
            ref_level=0,
            ref_scale=2.0,
            sample_rate=samp_rate / 50,
            fft_size=512,
            fft_rate=5,
            average=False,
            avg_alpha=None,
            title='FFT Plot',
            peak_hold=False,
        )
        self.Add(self.wxgui_fftsink2_0_0_0.win)
        self.osmosdr_source_0 = osmosdr.source(args="numchan=" + str(1) + " " +
                                               'rtl_tcp=192.168.10.109:1235')
        self.osmosdr_source_0.set_sample_rate(samp_rate)
        self.osmosdr_source_0.set_center_freq(base_freq, 0)
        self.osmosdr_source_0.set_freq_corr(frq_corr, 0)
        self.osmosdr_source_0.set_dc_offset_mode(2, 0)
        self.osmosdr_source_0.set_iq_balance_mode(2, 0)
        self.osmosdr_source_0.set_gain_mode(True, 0)
        self.osmosdr_source_0.set_gain(rfgain, 0)
        self.osmosdr_source_0.set_if_gain(0, 0)
        self.osmosdr_source_0.set_bb_gain(0, 0)
        self.osmosdr_source_0.set_antenna('RX', 0)
        self.osmosdr_source_0.set_bandwidth(0, 0)

        self.freq_xlating_fir_filter_xxx_0 = filter.freq_xlating_fir_filter_ccc(
            50, (firdes.low_pass_2(1, samp_rate, 25e3, 10e3, 40)), 0,
            samp_rate)
        self.blocks_udp_sink_0 = blocks.udp_sink(gr.sizeof_short * 1,
                                                 '192.168.10.30', 8082, 1472,
                                                 True)
        self.blocks_multiply_const_vxx_0 = blocks.multiply_const_vff(
            (volume, ))
        self.blocks_float_to_short_0 = blocks.float_to_short(1, 32767)
        self.audio_sink_0 = audio.sink(48000, '', True)
        self.analog_pwr_squelch_xx_0 = analog.pwr_squelch_cc(
            sql, 1e-4, 0, False)
        self.analog_am_demod_cf_0 = analog.am_demod_cf(
            channel_rate=48e3,
            audio_decim=1,
            audio_pass=5000,
            audio_stop=5500,
        )
        self.analog_agc2_xx_0 = analog.agc2_cc(1e-3, 1e-5, 1.0, 0)
        self.analog_agc2_xx_0.set_max_gain(5)

        ##################################################
        # Connections
        ##################################################
        self.connect((self.analog_agc2_xx_0, 0),
                     (self.analog_pwr_squelch_xx_0, 0))
        self.connect((self.analog_agc2_xx_0, 0),
                     (self.wxgui_fftsink2_0_0_0, 0))
        self.connect((self.analog_am_demod_cf_0, 0),
                     (self.blocks_float_to_short_0, 0))
        self.connect((self.analog_am_demod_cf_0, 0),
                     (self.blocks_multiply_const_vxx_0, 0))
        self.connect((self.analog_pwr_squelch_xx_0, 0),
                     (self.analog_am_demod_cf_0, 0))
        self.connect((self.blocks_float_to_short_0, 0),
                     (self.blocks_udp_sink_0, 0))
        self.connect((self.blocks_multiply_const_vxx_0, 0),
                     (self.audio_sink_0, 0))
        self.connect((self.freq_xlating_fir_filter_xxx_0, 0),
                     (self.analog_agc2_xx_0, 0))
        self.connect((self.osmosdr_source_0, 0),
                     (self.freq_xlating_fir_filter_xxx_0, 0))
Esempio n. 52
0
    def __init__(self):
        grc_wxgui.top_block_gui.__init__(self, title="air band receiver")

        ##################################################
        # Variables
        ##################################################
        self.sql = sql = option.squelch
        self.samp_rate = samp_rate = 2.4e6
        self.rfgain = rfgain = option.gain
        self.frq_corr = frq_corr = option.correct
        self.device_arg = device_arg = "rtl_tcp={0}:{1}".format(option.host, option.port)
        self.base_freq = base_freq = option.freq

        ##################################################
        # Blocks
        ##################################################
        self.osmosdr_source_0 = osmosdr.source( args="numchan=" + str(1) + " " + device_arg )
        self.osmosdr_source_0.set_sample_rate(samp_rate)
        self.osmosdr_source_0.set_center_freq(base_freq, 0)
        self.osmosdr_source_0.set_freq_corr(frq_corr, 0)
        self.osmosdr_source_0.set_dc_offset_mode(2, 0)
        self.osmosdr_source_0.set_iq_balance_mode(2, 0)
        self.osmosdr_source_0.set_gain_mode(True, 0)
        self.osmosdr_source_0.set_gain(rfgain, 0)
        self.osmosdr_source_0.set_if_gain(0, 0)
        self.osmosdr_source_0.set_bb_gain(0, 0)
        self.osmosdr_source_0.set_antenna('RX', 0)
        self.osmosdr_source_0.set_bandwidth(0, 0)

        self.freq_xlating_fir_filter_xxx_0 = filter.freq_xlating_fir_filter_ccc(50, (firdes.low_pass_2(1,samp_rate,25e3,10e3,40)), 0, samp_rate)
        self.blocks_udp_sink_0 = blocks.udp_sink(gr.sizeof_short*1, option.desthost, option.destport, 1472, True)
        self.blocks_throttle_0 = blocks.throttle(gr.sizeof_gr_complex*1, samp_rate,True)
        self.blocks_multiply_const_vxx_0 = blocks.multiply_const_vff((0.5, ))
        self.blocks_float_to_short_0 = blocks.float_to_short(1, 32767)
        self.audio_sink_0 = audio.sink(48000, '', True)
        self.analog_pwr_squelch_xx_0 = analog.pwr_squelch_cc(sql, 1e-4, 0, False)
        self.analog_am_demod_cf_0 = analog.am_demod_cf(
        	channel_rate=48e3,
        	audio_decim=1,
        	audio_pass=5000,
        	audio_stop=5500,
        )
        self.analog_agc2_xx_0 = analog.agc2_cc(1e-3, 1e-5, 1.0, 0)
        self.analog_agc2_xx_0.set_max_gain(5)

        # dc_blocker not use 
        # self.dc_blocker_xx_0 = filter.dc_blocker_ff(32,True)


        ##################################################
        # Connections
        ##################################################
        self.connect((self.analog_agc2_xx_0, 0), (self.analog_pwr_squelch_xx_0, 0))
        self.connect((self.analog_pwr_squelch_xx_0, 0), (self.analog_am_demod_cf_0, 0))
        self.connect((self.blocks_float_to_short_0, 0), (self.blocks_udp_sink_0, 0))
        self.connect((self.blocks_multiply_const_vxx_0, 0), (self.audio_sink_0, 0))
        self.connect((self.blocks_throttle_0, 0), (self.freq_xlating_fir_filter_xxx_0, 0))
        self.connect((self.freq_xlating_fir_filter_xxx_0, 0), (self.analog_agc2_xx_0, 0))
        self.connect((self.osmosdr_source_0, 0), (self.blocks_throttle_0, 0))

        # bypass dc blocker
        # self.connect((self.analog_am_demod_cf_0, 0), (self.dc_blocker_xx_0, 0))
        # self.connect((self.dc_blocker_xx_0, 0), (self.blocks_float_to_short_0, 0))
        # self.connect((self.dc_blocker_xx_0, 0), (self.blocks_multiply_const_vxx_0, 0))
        self.connect((self.analog_am_demod_cf_0, 0), (self.blocks_float_to_short_0, 0))
        self.connect((self.analog_am_demod_cf_0, 0), (self.blocks_multiply_const_vxx_0, 0))
Esempio n. 53
0
    def __init__(self, sample_rate, freq_offset, sys_id, chan, group_id, save_dir):

        gr.hier_block2.__init__(
            self,
            "SmartZone Audio Channel",
            gr.io_signature(1, 1, gr.sizeof_gr_complex),  # input signature
            gr.io_signature(0, 0, 0),  # output signature
        )

        # audio constants
        self._audio_sample_rate = 8000
        self._audio_passband = 3.6e3
        self._audio_stopband = 4e3
        self._audio_gain = 1.0

        # fm constants
        self._deviation = 2.5e3
        self._fm_passband = self._audio_stopband + self._deviation
        self._fm_stopband = self._fm_passband + 8e3  # 3 * audio_bw

        # fm channel values
        desired_channel_rate = 40e3
        channel_decimation = int(round(sample_rate / desired_channel_rate))
        channel_rate = sample_rate / channel_decimation

        # audio channel values
        desired_audio_rate = 8e3
        audio_decimation = int(round(channel_rate / desired_audio_rate))
        audio_rate = channel_rate / audio_decimation

        # translate desired fm audio frequency to baseband; decimate to channel rate
        channel_taps = optfir.low_pass(1, sample_rate, self._fm_passband, self._fm_stopband, 0.1, 60)
        channel_filter = filter.freq_xlating_fir_filter_ccf(
            channel_decimation,
            optfir.low_pass(1, sample_rate, self._fm_passband, self._fm_stopband, 0.1, 60),
            freq_offset,
            sample_rate,
        )

        # power squelch
        squelch = analog.pwr_squelch_cc(-50, alpha=1, ramp=0, gate=True)

        # fm demodulation
        audio_demod = analog.fm_demod_cf(
            channel_rate,
            audio_decimation,
            self._deviation,
            self._audio_passband,
            self._audio_stopband,
            self._audio_gain,
            75e-6,
        )

        # remove sub-audible data  XXX demodulate
        sa_filter = filter.fir_filter_fff(1, firdes.band_pass(1, audio_rate, 400, 3900, 100, filter.firdes.WIN_HANN))

        # audio output

        # ensure directory exists
        create_directory(save_dir, sys_id)

        # asink = audio.sink(audio_rate)
        wavfile_sink = blocks.wavfile_sink(
            "%s/%x/%s" % (save_dir, sys_id, audio_name(group_id, chan)), 1, int(round(audio_rate)), 8
        )

        self.connect(self, channel_filter, squelch, audio_demod, sa_filter, wavfile_sink)
Esempio n. 54
0
    def __init__(self):
        grc_wxgui.top_block_gui.__init__(self)
        _icon_path = "/usr/share/icons/hicolor/32x32/apps/gnuradio-grc.png"
        self.SetIcon(wx.Icon(_icon_path, wx.BITMAP_TYPE_ANY))

        ##################################################
        # Variables
        ##################################################
        self.base_freq = base_freq = 121250000
        self.t = 0
        self.volume_min = 0.001
        self.volume = volume = self.volume_min
        self.volume_max = 0.6
        self.squelch = squelch = -26
        self.samp_rate = samp_rate = 2400000
        self.freq_corr = freq_corr = 31
        self.freq = freq = base_freq
        self.frq_choices = [
            121250000, 121500000, 122200000, 123450000, 124175000, 124925000,
            125450000, 130875000, 132700000, 134225000, 134925000, 136050000,
            136575000, 169000000
        ]
        # EPSD Port 122700000      EP Przelotowa 124500000      Air-To-Air 2 136975000
        #self.frq_choices = [134225000]
        self.frq_labels = [
            'EPSC TWR', 'EP EMRG', 'EPSD Kwadrat', 'Air-To-Air',
            'Mueritz EDWW Radar', 'B FIR Warszawa', 'EPWW Radar 2',
            'EPWW Radar 3', 'EPWW Radar 4', 'D FIR Warszawa', 'EPWW Radar',
            'Mark EDWW Radar', 'E FIR Warszawa', 'Lotnicze Pogotowie Ratunkowe'
        ]
        #self.frq_labels = ['D FIR Warszawa']
        self.j = 0

        ##################################################
        # Blocks
        ##################################################

        self.rtlsdr_source_0 = osmosdr.source(args="numchan=" + str(1) + " " +
                                              "")
        self.rtlsdr_source_0.set_sample_rate(samp_rate)
        self.rtlsdr_source_0.set_center_freq(freq, 0)
        self.rtlsdr_source_0.set_freq_corr(freq_corr, 0)
        self.rtlsdr_source_0.set_dc_offset_mode(0, 0)
        self.rtlsdr_source_0.set_iq_balance_mode(2, 0)
        self.rtlsdr_source_0.set_gain_mode(False, 0)
        self.rtlsdr_source_0.set_gain(49.6, 0)
        self.rtlsdr_source_0.set_if_gain(1, 0)
        self.rtlsdr_source_0.set_bb_gain(1, 0)
        self.rtlsdr_source_0.set_antenna("RX", 0)
        self.rtlsdr_source_0.set_bandwidth(0, 0)

        self.signal_probe = blocks.probe_signal_c()
        #self.signal_probe = analog.probe_avg_mag_sqrd_c(0, 1)
        self.freq_xlating_fir_filter_xxx_0 = filter.freq_xlating_fir_filter_ccc(
            50, (firdes.low_pass_2(1, samp_rate, 25e3, 10e3, 40)), 0,
            samp_rate)
        self.blocks_multiply_const_vxx_0 = blocks.multiply_const_vff(
            (volume, ))
        self.audio_sink_0 = audio.sink(48000, "hw:0,1", True)
        self.analog_pwr_squelch_xx_0 = analog.pwr_squelch_cc(
            squelch, 0.1, 0, False)
        self.analog_am_demod_cf_0 = analog.am_demod_cf(
            channel_rate=48000,
            audio_decim=1,
            audio_pass=5000,
            audio_stop=5500,
        )
        self.analog_agc2_xx_0 = analog.agc2_cc(1e-1, 0.1e-4, 1.0, 0)
        self.analog_agc2_xx_0.set_max_gain(5)

        ##################################################
        # Connections
        ##################################################
        self.connect((self.blocks_multiply_const_vxx_0, 0),
                     (self.audio_sink_0, 0))
        self.connect((self.rtlsdr_source_0, 0),
                     (self.freq_xlating_fir_filter_xxx_0, 0))
        self.connect((self.analog_am_demod_cf_0, 0),
                     (self.blocks_multiply_const_vxx_0, 0))
        self.connect((self.analog_agc2_xx_0, 0),
                     (self.analog_am_demod_cf_0, 0))
        self.connect((self.freq_xlating_fir_filter_xxx_0, 0),
                     (self.analog_pwr_squelch_xx_0, 0))
        self.connect((self.analog_pwr_squelch_xx_0, 0), (self.signal_probe, 0))
        self.connect((self.analog_pwr_squelch_xx_0, 0),
                     (self.analog_agc2_xx_0, 0))
Esempio n. 55
0
  def build_blocks(self,config):
    if not self.device_found:
      return
      
    self.error = False

    fft_size = self.main.fft_size_control.get_value()
    
    frame_rate = self.main.framerate_control.get_value()
    average = self.main.average_control.get_value()
    ssb_lo = self.ssb_lo
    ssb_hi = self.ssb_hi
    
    USB = self.mode == self.main.MODE_USB or self.mode == self.main.MODE_CW_USB
      
    self.audio_dec_nrw = 1
    
    self.dec_nrw, self.interp_nrw = self.compute_dec_interp(self.sample_rate,self.audio_rate)
    
    self.audio_dec_wid = self.if_sample_rate / self.audio_rate
    
    self.dec_wid, self.interp_wid = self.compute_dec_interp(self.sample_rate,self.if_sample_rate)
          
    volume = .1
    
    self.configure_source_controls()
    
    self.create_update_freq_xlating_fir_filter()
    
    self.analog_agc_cc = analog.agc2_cc(1e-1, 1e-2, 1.0, 1.0)
    self.analog_agc_cc.set_max_gain(1)
    
    self.analog_agc_ff = analog.agc2_ff(1e-1, 1e-2, 1.0, 1.0)
    self.analog_agc_ff.set_max_gain(1)
        
    self.rational_resampler_wid = filter.rational_resampler_ccc(
      decimation=int(self.dec_wid),
      interpolation=int(self.interp_wid),
      taps=None,
      fractional_bw=None,
        )
        
    self.rational_resampler_nrw = filter.rational_resampler_ccc(
      decimation=int(self.dec_nrw),
      interpolation=int(self.interp_nrw),
      taps=None,
      fractional_bw=None,
        )
        
    self.analog_pwr_squelch = analog.pwr_squelch_cc(self.squelch_level, 1e-4, 0, True)
    
    self.analog_pwr_squelch_ssb = analog.pwr_squelch_ff(self.squelch_level, 1e-4, 0, True)
        
    self.blocks_multiply = blocks.multiply_vcc(1)
    self.blocks_complex_to_real = blocks.complex_to_real(1)
    
    #self.rebuild_filters(config)
     
    self.blocks_complex_to_mag_am = blocks.complex_to_mag(1)
      
    self.analog_nbfm_rcv = analog.nbfm_rx(
        audio_rate=self.audio_rate,
        quad_rate=self.audio_rate,
        tau=75e-6,
        max_dev=6e3,
        )
      
    self.analog_wfm_rcv = analog.wfm_rcv(
        quad_rate=self.if_sample_rate,
        audio_decimation=self.audio_dec_wid,
      )
      
    self.hilbert_fc_2 = filter.hilbert_fc(self.hilbert_taps_ssb, firdes.WIN_HAMMING, 6.76)
    self.hilbert_fc_1 = filter.hilbert_fc(self.hilbert_taps_ssb, firdes.WIN_HAMMING, 6.76)
    
    self.blocks_multiply_ssb = blocks.multiply_vcc(1)
    
    self.blocks_complex_to_float_ssb = blocks.complex_to_float(1)
    
    self.create_usb_lsb_switch()
    
    self.blocks_add = blocks.add_vff(1)
    
    self.blocks_complex_to_real = blocks.complex_to_real(1)
    self.blocks_complex_to_imag = blocks.complex_to_imag(1)
         
    # this is the source for the FFT display's data  
    self.logpwrfft = logpwrfft.logpwrfft_c(
      sample_rate=self.sample_rate,
      fft_size=fft_size,
      ref_scale=2,
      frame_rate=frame_rate,
      avg_alpha=average,
      average=(average != 1),
        )

    # this is the main FFT display
    self.fft_vector_sink = MyVectorSink(self.main,fft_size)
    
    self.blocks_multiply_const_volume = blocks.multiply_const_vff((volume, ))
        
    # only create this once
    if self.audio_sink == None:
      try:
        self.audio_sink = audio.sink(self.audio_rate, config['audio_device'], True)
      except Exception as e:
        self.main.message_dialog("Audio Error","A problem has come up while accessing the audio system: %s" % e)
        self.error = True
        self.audio_sink = None

    self.main.af_gain_control.set_value()
Esempio n. 56
0
    def __init__(self,
                 antenna="TX/RX",
                 vor_freq_1=111e6,
                 com_freq_1=135.275e6,
                 vor_freq_2=111e6,
                 rx_gain=30,
                 gain=20):
        grc_wxgui.top_block_gui.__init__(self, title="Top Block")

        ##################################################
        # Parameters
        ##################################################
        self.antenna = antenna
        self.vor_freq_1 = vor_freq_1
        self.com_freq_1 = com_freq_1
        self.vor_freq_2 = vor_freq_2
        self.rx_gain = rx_gain
        self.gain = gain

        ##################################################
        # Variables
        ##################################################
        self.obs_decimation = obs_decimation = 25
        self.ils_decimation = ils_decimation = 50
        self.am_sample_rate = am_sample_rate = 12.5e3
        self.vor_samp_rate = vor_samp_rate = 250e3
        self.vor_freq_entry_2 = vor_freq_entry_2 = vor_freq_2
        self.vor_freq_entry_1 = vor_freq_entry_1 = vor_freq_1
        self.vor_center_freq_0 = vor_center_freq_0 = (117.95e6 -
                                                      108.00e6) / 2 + 117.95e6
        self.vor_center_freq = vor_center_freq = (117.95e6 -
                                                  108.00e6) / 2 + 117.95e6
        self.squelch_slider = squelch_slider = -110
        self.rxgain = rxgain = 15
        self.phase_correction = phase_correction = 5
        self.obs_sample_rate = obs_sample_rate = am_sample_rate / obs_decimation
        self.ils_sample_rate = ils_sample_rate = am_sample_rate / ils_decimation
        self.gain_slider = gain_slider = gain
        self.com_freq_entry_1 = com_freq_entry_1 = com_freq_1
        self.band_center_freq = band_center_freq = (136.975e6 -
                                                    108.0e6) / 2 + 108.0e6
        self.audio_select = audio_select = 0
        self.audio_sample_rate = audio_sample_rate = 48e3
        self.am_decimation = am_decimation = 1

        ##################################################
        # Blocks
        ##################################################
        self.notebook_0 = self.notebook_0 = wx.Notebook(self.GetWin(),
                                                        style=wx.NB_TOP)
        self.notebook_0.AddPage(grc_wxgui.Panel(self.notebook_0),
                                "RF Analyzer")
        self.notebook_0.AddPage(grc_wxgui.Panel(self.notebook_0),
                                "Channel FFT")
        self.notebook_0.AddPage(grc_wxgui.Panel(self.notebook_0),
                                "Demod Audio FFT")
        self.notebook_0.AddPage(grc_wxgui.Panel(self.notebook_0),
                                "Ref and Phase Scope")
        self.notebook_0.AddPage(grc_wxgui.Panel(self.notebook_0),
                                "Manipulated Ref and Phase")
        self.Add(self.notebook_0)
        self._vor_freq_entry_1_text_box = forms.text_box(
            parent=self.notebook_0.GetPage(0).GetWin(),
            value=self.vor_freq_entry_1,
            callback=self.set_vor_freq_entry_1,
            label='vor_freq_entry_1',
            converter=forms.float_converter(),
        )
        self.notebook_0.GetPage(0).Add(self._vor_freq_entry_1_text_box)
        _gain_slider_sizer = wx.BoxSizer(wx.VERTICAL)
        self._gain_slider_text_box = forms.text_box(
            parent=self.notebook_0.GetPage(0).GetWin(),
            sizer=_gain_slider_sizer,
            value=self.gain_slider,
            callback=self.set_gain_slider,
            label='gain_slider',
            converter=forms.float_converter(),
            proportion=0,
        )
        self._gain_slider_slider = forms.slider(
            parent=self.notebook_0.GetPage(0).GetWin(),
            sizer=_gain_slider_sizer,
            value=self.gain_slider,
            callback=self.set_gain_slider,
            minimum=0,
            maximum=30,
            num_steps=100,
            style=wx.SL_HORIZONTAL,
            cast=float,
            proportion=1,
        )
        self.notebook_0.GetPage(0).Add(_gain_slider_sizer)
        self._com_freq_entry_1_text_box = forms.text_box(
            parent=self.notebook_0.GetPage(0).GetWin(),
            value=self.com_freq_entry_1,
            callback=self.set_com_freq_entry_1,
            label='com_freq_entry_1',
            converter=forms.float_converter(),
        )
        self.notebook_0.GetPage(0).Add(self._com_freq_entry_1_text_box)
        self.wxgui_scopesink2_0 = scopesink2.scope_sink_f(
            self.notebook_0.GetPage(1).GetWin(),
            title="Scope Plot",
            sample_rate=10e3,
            v_scale=0,
            v_offset=0,
            t_scale=0,
            ac_couple=False,
            xy_mode=False,
            num_inputs=2,
            trig_mode=wxgui.TRIG_MODE_AUTO,
            y_axis_label="Counts",
        )
        self.notebook_0.GetPage(1).Add(self.wxgui_scopesink2_0.win)
        self.wxgui_numbersink2_0 = numbersink2.number_sink_f(
            self.GetWin(),
            unit="Units",
            minval=-100,
            maxval=100,
            factor=1.0,
            decimal_places=10,
            ref_level=0,
            sample_rate=10,
            number_rate=15,
            average=False,
            avg_alpha=None,
            label="Number Plot",
            peak_hold=False,
            show_gauge=True,
        )
        self.Add(self.wxgui_numbersink2_0.win)
        self.wxgui_fftsink2_0 = fftsink2.fft_sink_c(
            self.notebook_0.GetPage(0).GetWin(),
            baseband_freq=0,
            y_per_div=10,
            y_divs=10,
            ref_level=0,
            ref_scale=2.0,
            sample_rate=12.5e3,
            fft_size=1024,
            fft_rate=5,
            average=False,
            avg_alpha=None,
            title="FFT Plot",
            peak_hold=False,
        )
        self.notebook_0.GetPage(0).Add(self.wxgui_fftsink2_0.win)
        self._vor_freq_entry_2_text_box = forms.text_box(
            parent=self.notebook_0.GetPage(0).GetWin(),
            value=self.vor_freq_entry_2,
            callback=self.set_vor_freq_entry_2,
            label='vor_freq_entry_2',
            converter=forms.float_converter(),
        )
        self.notebook_0.GetPage(0).Add(self._vor_freq_entry_2_text_box)
        self.uhd_usrp_source_0 = uhd.usrp_source(
            device_addr="",
            stream_args=uhd.stream_args(
                cpu_format="fc32",
                channels=range(2),
            ),
        )
        self.uhd_usrp_source_0.set_subdev_spec("A:0 A:0", 0)
        self.uhd_usrp_source_0.set_samp_rate(vor_samp_rate)
        self.uhd_usrp_source_0.set_center_freq(
            uhd.tune_request(com_freq_entry_1,
                             rf_freq=band_center_freq,
                             rf_freq_policy=uhd.tune_request.POLICY_MANUAL), 0)
        self.uhd_usrp_source_0.set_gain(gain_slider, 0)
        self.uhd_usrp_source_0.set_antenna("TX/RX", 0)
        self.uhd_usrp_source_0.set_center_freq(
            uhd.tune_request(vor_freq_entry_1,
                             rf_freq=band_center_freq,
                             rf_freq_policy=uhd.tune_request.POLICY_MANUAL), 1)
        self.uhd_usrp_source_0.set_gain(gain_slider, 1)
        self.uhd_usrp_source_0.set_antenna("TX/RX", 1)
        self.uhd_usrp_sink_0 = uhd.usrp_sink(
            device_addr="",
            stream_args=uhd.stream_args(
                cpu_format="fc32",
                channels=range(1),
            ),
        )
        self.uhd_usrp_sink_0.set_samp_rate(250e3)
        self.uhd_usrp_sink_0.set_center_freq(
            uhd.tune_request(com_freq_entry_1, 20e6), 0)
        self.uhd_usrp_sink_0.set_gain(15, 0)
        self.uhd_usrp_sink_0.set_antenna("TX/RX", 0)
        _squelch_slider_sizer = wx.BoxSizer(wx.VERTICAL)
        self._squelch_slider_text_box = forms.text_box(
            parent=self.notebook_0.GetPage(0).GetWin(),
            sizer=_squelch_slider_sizer,
            value=self.squelch_slider,
            callback=self.set_squelch_slider,
            label='squelch_slider',
            converter=forms.float_converter(),
            proportion=0,
        )
        self._squelch_slider_slider = forms.slider(
            parent=self.notebook_0.GetPage(0).GetWin(),
            sizer=_squelch_slider_sizer,
            value=self.squelch_slider,
            callback=self.set_squelch_slider,
            minimum=-110,
            maximum=0,
            num_steps=100,
            style=wx.SL_HORIZONTAL,
            cast=float,
            proportion=1,
        )
        self.notebook_0.GetPage(0).Add(_squelch_slider_sizer)
        self.squelch = analog.pwr_squelch_cc(squelch_slider, 0.01, 20, True)
        self.rational_resampler_xxx_2 = filter.rational_resampler_fff(
            interpolation=250,
            decimation=48,
            taps=None,
            fractional_bw=None,
        )
        self.rational_resampler_xxx_1 = filter.rational_resampler_fff(
            interpolation=480,
            decimation=125,
            taps=None,
            fractional_bw=None,
        )
        self.rational_resampler_xxx_0 = filter.rational_resampler_ccc(
            interpolation=4,
            decimation=5,
            taps=None,
            fractional_bw=None,
        )
        self.openavionics_joystick_interface_0 = openavionics.joystick_interface(
        )
        self.openavionics_audio_ptt_0 = openavionics.audio_ptt()
        self.null_sink_0_0_0 = blocks.null_sink(gr.sizeof_gr_complex * 1)
        self.null_sink_0_0 = blocks.null_sink(gr.sizeof_gr_complex * 1)
        self.multiply_xx_0_0_0 = blocks.multiply_vcc(1)
        self.multiply_xx_0_0 = blocks.multiply_vff(1)
        self.low_pass_filter_3 = filter.fir_filter_ccf(
            1, firdes.low_pass(1, 10e3, 1, 2, firdes.WIN_HAMMING, 6.76))
        self.low_pass_filter_2_0_0 = filter.fir_filter_ccf(
            5, firdes.low_pass(1, 40e3, 2e3, 1e3, firdes.WIN_HAMMING, 6.76))
        self.low_pass_filter_2_0 = filter.fir_filter_ccf(
            5, firdes.low_pass(1, 40e3, 2e3, 1e3, firdes.WIN_HAMMING, 6.76))
        self.low_pass_filter_2 = filter.fir_filter_ccf(
            5,
            firdes.low_pass(1, vor_samp_rate, 15e3, 5e3, firdes.WIN_HAMMING,
                            6.76))
        self.low_pass_filter_1 = filter.interp_fir_filter_fff(
            1, firdes.low_pass(1, 12.5e3, 3e3, 1e3, firdes.WIN_HAMMING, 6.76))
        self.low_pass_filter_0 = filter.fir_filter_ccf(
            int(250e3 / 12.5e3),
            firdes.low_pass(1, vor_samp_rate, 10e3, 1e3, firdes.WIN_HAMMING,
                            6.76))
        self.goertzel_fc_0_0 = fft.goertzel_fc(10000, 1000, 30)
        self.goertzel_fc_0 = fft.goertzel_fc(40000, 4000, 30)
        self.float_to_complex_0_0 = blocks.float_to_complex(1)
        self.const_source_x_0_0_0 = analog.sig_source_c(
            0, analog.GR_CONST_WAVE, 0, 0, 0.450)
        self.const_source_x_0_0 = analog.sig_source_f(0, analog.GR_CONST_WAVE,
                                                      0, 0, 0.550)
        self.const_source_x_0 = analog.sig_source_f(0, analog.GR_CONST_WAVE, 0,
                                                    0, 0.450)
        self.blocks_multiply_xx_0 = blocks.multiply_vcc(1)
        self.blocks_multiply_conjugate_cc_0 = blocks.multiply_conjugate_cc(1)
        self.blocks_complex_to_arg_0 = blocks.complex_to_arg(1)
        self.blocks_add_const_vxx_0 = blocks.add_const_vff((-87.2665e-3, ))
        self.band_pass_filter_0_0 = filter.fir_filter_fff(
            4, firdes.band_pass(1, 40e3, 20, 40, 20, firdes.WIN_HAMMING, 6.76))
        self.band_pass_filter_0 = filter.fir_filter_fff(
            1, firdes.band_pass(1, 10e3, 20, 40, 20, firdes.WIN_HAMMING, 6.76))
        self.audio_source_0 = audio.source(48000, "", True)
        self.audio_sink_0 = audio.sink(int(audio_sample_rate), "", True)
        self._audio_select_chooser = forms.drop_down(
            parent=self.GetWin(),
            value=self.audio_select,
            callback=self.set_audio_select,
            label='audio_select',
            choices=[0, 1],
            labels=['AM Voice', 'VOR Subcarrier'],
        )
        self.Add(self._audio_select_chooser)
        self.analog_sig_source_x_0 = analog.sig_source_c(
            40e3, analog.GR_COS_WAVE, -9.96e3, 1, 0)
        self.analog_quadrature_demod_cf_0 = analog.quadrature_demod_cf(1)
        self.analog_am_demod_cf_0 = analog.am_demod_cf(
            channel_rate=40e3,
            audio_decim=4,
            audio_pass=5000,
            audio_stop=5500,
        )
        self.analog_agc2_xx_0_1_0 = analog.agc2_ff(1e-1, 1e-2, 1.0, 1.0)
        self.analog_agc2_xx_0_1_0.set_max_gain(100)
        self.analog_agc2_xx_0_1 = analog.agc2_ff(1e-1, 1e-2, 1.0, 1.0)
        self.analog_agc2_xx_0_1.set_max_gain(100)
        self.analog_agc2_xx_0_0 = analog.agc2_cc(1e-1, 1e-2, 1.0, 1.0)
        self.analog_agc2_xx_0_0.set_max_gain(100)
        self.analog_agc2_xx_0 = analog.agc2_cc(1e-1, 1e-2, 1.0, 1.0)
        self.analog_agc2_xx_0.set_max_gain(100)
        self.am_demod_cf_0 = analog.am_demod_cf(
            channel_rate=am_sample_rate,
            audio_decim=am_decimation,
            audio_pass=3e3,
            audio_stop=4e3,
        )
        self.agc2_xx_0 = analog.agc2_cc(1, 1, 0.75, 1.0)
        self.agc2_xx_0.set_max_gain(0.0)
        self.add_xx_0_0 = blocks.add_vff(1)

        ##################################################
        # Connections
        ##################################################
        self.connect((self.agc2_xx_0, 0), (self.am_demod_cf_0, 0))
        self.connect((self.am_demod_cf_0, 0), (self.low_pass_filter_1, 0))
        self.connect((self.agc2_xx_0, 0), (self.wxgui_fftsink2_0, 0))
        self.connect((self.multiply_xx_0_0, 0), (self.add_xx_0_0, 0))
        self.connect((self.const_source_x_0, 0), (self.multiply_xx_0_0, 1))
        self.connect((self.const_source_x_0_0, 0), (self.add_xx_0_0, 1))
        self.connect((self.multiply_xx_0_0_0, 0), (self.uhd_usrp_sink_0, 0))
        self.connect((self.add_xx_0_0, 0), (self.float_to_complex_0_0, 0))
        self.connect((self.add_xx_0_0, 0), (self.float_to_complex_0_0, 1))
        self.connect((self.float_to_complex_0_0, 0),
                     (self.multiply_xx_0_0_0, 0))
        self.connect((self.const_source_x_0_0_0, 0),
                     (self.multiply_xx_0_0_0, 1))
        self.connect((self.uhd_usrp_source_0, 0), (self.null_sink_0_0_0, 0))
        self.connect((self.uhd_usrp_source_0, 0), (self.low_pass_filter_0, 0))
        self.connect((self.low_pass_filter_1, 0),
                     (self.rational_resampler_xxx_1, 0))
        self.connect((self.rational_resampler_xxx_1, 0),
                     (self.audio_sink_0, 0))
        self.connect((self.analog_agc2_xx_0_1_0, 0),
                     (self.wxgui_scopesink2_0, 1))
        self.connect((self.analog_agc2_xx_0_1, 0),
                     (self.wxgui_scopesink2_0, 0))
        self.connect((self.band_pass_filter_0, 0),
                     (self.analog_agc2_xx_0_1, 0))
        self.connect((self.band_pass_filter_0_0, 0),
                     (self.analog_agc2_xx_0_1_0, 0))
        self.connect((self.analog_quadrature_demod_cf_0, 0),
                     (self.band_pass_filter_0_0, 0))
        self.connect((self.analog_quadrature_demod_cf_0, 0),
                     (self.goertzel_fc_0, 0))
        self.connect((self.analog_am_demod_cf_0, 0),
                     (self.band_pass_filter_0, 0))
        self.connect((self.blocks_add_const_vxx_0, 0),
                     (self.wxgui_numbersink2_0, 0))
        self.connect((self.blocks_complex_to_arg_0, 0),
                     (self.blocks_add_const_vxx_0, 0))
        self.connect((self.low_pass_filter_3, 0),
                     (self.blocks_complex_to_arg_0, 0))
        self.connect((self.blocks_multiply_conjugate_cc_0, 0),
                     (self.low_pass_filter_3, 0))
        self.connect((self.analog_agc2_xx_0, 0),
                     (self.blocks_multiply_conjugate_cc_0, 1))
        self.connect((self.analog_agc2_xx_0_0, 0),
                     (self.blocks_multiply_conjugate_cc_0, 0))
        self.connect((self.goertzel_fc_0_0, 0), (self.analog_agc2_xx_0_0, 0))
        self.connect((self.analog_am_demod_cf_0, 0), (self.goertzel_fc_0_0, 0))
        self.connect((self.goertzel_fc_0, 0), (self.analog_agc2_xx_0, 0))
        self.connect((self.low_pass_filter_2_0_0, 0),
                     (self.analog_am_demod_cf_0, 0))
        self.connect((self.rational_resampler_xxx_0, 0),
                     (self.low_pass_filter_2_0_0, 0))
        self.connect((self.low_pass_filter_2_0, 0),
                     (self.analog_quadrature_demod_cf_0, 0))
        self.connect((self.analog_sig_source_x_0, 0),
                     (self.blocks_multiply_xx_0, 1))
        self.connect((self.blocks_multiply_xx_0, 0),
                     (self.low_pass_filter_2_0, 0))
        self.connect((self.rational_resampler_xxx_0, 0),
                     (self.blocks_multiply_xx_0, 0))
        self.connect((self.uhd_usrp_source_0, 1), (self.null_sink_0_0, 0))
        self.connect((self.low_pass_filter_2, 0),
                     (self.rational_resampler_xxx_0, 0))
        self.connect((self.audio_source_0, 0),
                     (self.openavionics_audio_ptt_0, 0))
        self.connect((self.openavionics_audio_ptt_0, 0),
                     (self.rational_resampler_xxx_2, 0))
        self.connect((self.rational_resampler_xxx_2, 0),
                     (self.multiply_xx_0_0, 0))
        self.connect((self.squelch, 0), (self.agc2_xx_0, 0))
        self.connect((self.low_pass_filter_0, 0), (self.squelch, 0))
        self.connect((self.uhd_usrp_source_0, 0), (self.low_pass_filter_2, 0))

        ##################################################
        # Asynch Message Connections
        ##################################################
        self.msg_connect(self.openavionics_joystick_interface_0, "out",
                         self.openavionics_audio_ptt_0, "in2")
Esempio n. 57
0
    def __init__(self):
        grc_wxgui.top_block_gui.__init__(self, title="NBFM Receiver")

        ##################################################
        # Variables
        ##################################################
        self.samp_rate = samp_rate = 125e6

        ##################################################
        # Blocks
        ##################################################
        self.wxgui_waterfallsink2_0 = waterfallsink2.waterfall_sink_c(
        	self.GetWin(),
        	baseband_freq=450e6,
        	dynamic_range=100,
        	ref_level=0,
        	ref_scale=2.0,
        	sample_rate=samp_rate,
        	fft_size=512,
        	fft_rate=15,
        	average=False,
        	avg_alpha=None,
        	title="Waterfall Plot",
        )
        self.Add(self.wxgui_waterfallsink2_0.win)
        self.rational_resampler_xxx_0_0 = filter.rational_resampler_ccc(
                interpolation=3,
                decimation=125,
                taps=None,
                fractional_bw=None,
        )
        self.rational_resampler_xxx_0 = filter.rational_resampler_fff(
                interpolation=48,
                decimation=30,
                taps=None,
                fractional_bw=None,
        )
        self.low_pass_filter_0 = filter.fir_filter_ccf(10, firdes.low_pass(
        	1, 3e6, 5e3, 2e3, firdes.WIN_HAMMING, 6.76))
        self.blocks_multiply_const_vxx_0 = blocks.multiply_const_vff((10, ))
        self.blocks_interleaved_short_to_complex_0 = blocks.interleaved_short_to_complex(False, False)
        self.blocks_file_source_0 = blocks.file_source(gr.sizeof_short*1, "/dev/langford", True)
        self.audio_sink_0 = audio.sink(48000, "", True)
        self.analog_pwr_squelch_xx_1 = analog.pwr_squelch_cc(-80, 1, 0, False)
        self.analog_nbfm_rx_0 = analog.nbfm_rx(
        	audio_rate=30000,
        	quad_rate=300000,
        	tau=75e-6,
        	max_dev=5e3,
        )

        ##################################################
        # Connections
        ##################################################
        self.connect((self.blocks_file_source_0, 0), (self.blocks_interleaved_short_to_complex_0, 0))
        self.connect((self.low_pass_filter_0, 0), (self.analog_nbfm_rx_0, 0))
        self.connect((self.blocks_multiply_const_vxx_0, 0), (self.audio_sink_0, 0))
        self.connect((self.rational_resampler_xxx_0, 0), (self.blocks_multiply_const_vxx_0, 0))
        self.connect((self.analog_nbfm_rx_0, 0), (self.rational_resampler_xxx_0, 0))
        self.connect((self.blocks_interleaved_short_to_complex_0, 0), (self.wxgui_waterfallsink2_0, 0))
        self.connect((self.blocks_interleaved_short_to_complex_0, 0), (self.rational_resampler_xxx_0_0, 0))
        self.connect((self.rational_resampler_xxx_0_0, 0), (self.analog_pwr_squelch_xx_1, 0))
        self.connect((self.analog_pwr_squelch_xx_1, 0), (self.low_pass_filter_0, 0))