def __init__(self, parent=None):
super().__init__(parent)
self.ui = Ui_MainWindow()
self.ui.setupUi(self)
self.ui.pb_models.clicked.connect(self.models_changed)
self.ui.pb_models_2.clicked.connect(self.models_predefined)
self.ui.pb_plot.clicked.connect(self.plot_results)
self.ui.pb_plot_diff.clicked.connect(self.plot_differences)
self.ui.pb_models.clicked.connect(
lambda: self.ui.stackedWidget.setCurrentIndex(2))
self.ui.pb_models_2.clicked.connect(
lambda: self.ui.stackedWidget.setCurrentIndex(2))
self.ui.pb_select.clicked.connect(
lambda: self.ui.stackedWidget.setCurrentIndex(0))
self.ui.pb_select_2.clicked.connect(
lambda: self.ui.stackedWidget.setCurrentIndex(1))
self.ui.pb_filepath_selec.clicked.connect(
lambda: self.ui.stackedWidget.setCurrentIndex(0))
self.ui.pb_selection.clicked.connect(
lambda: self.ui.stackedWidget.setCurrentIndex(1))
self.ui.cbx_cat_c1.currentTextChanged.connect(self.cat_c1_changed)
self.ui.cbx_cat_c2.currentTextChanged.connect(self.cat_c2_changed)
self.ui.cbx_cat_c3.currentTextChanged.connect(self.cat_c3_changed)
self.ui.cbx_cat_c4.currentTextChanged.connect(self.cat_c4_changed)
self.ui.cbx_inp_depth_m1.currentTextChanged.connect(
self.model1_input_change)
self.ui.cbx_inp_depth_m2.currentTextChanged.connect(
self.model2_input_change)
def __init__(self):
QtWidgets.QMainWindow.__init__(self)
Ui_MainWindow.__init__(self)
self.setupUi(self)
# Set default options
self.createNewTableRB.setChecked(True)
def __init__(self, parent=None):
QtGui.QWidget.__init__(self, parent)
self.ui = Ui_MainWindow()
self.ui.setupUi(self)
self.saveForm = None
self.testForm = None
self.ui.kinect_radio.setIcon(
QtGui.QIcon("resources/images/kinect2.png"))
self.ui.imu_radio.setIcon(QtGui.QIcon("resources/images/IMU.png"))
self.ui.kinect_imu_radio.setIcon(
QtGui.QIcon("resources/images/kinectIMU.png"))
self.ui.kinect_radio.setIconSize(QtCore.QSize(100, 100))
self.ui.imu_radio.setIconSize(QtCore.QSize(100, 100))
self.ui.kinect_imu_radio.setIconSize(QtCore.QSize(100, 100))
self.ui.start_btn.clicked.connect(self.startAcquisition)
self.ui.start_btn.clicked.connect(self.resetGUI)
self.ui.imu_radio.clicked.connect(self.checkChanged)
self.ui.kinect_imu_radio.clicked.connect(self.checkChanged)
self.ui.kinect_radio.clicked.connect(self.checkChanged)
self.ui.save_radio.clicked.connect(self.checkChanged)
self.ui.test_radio.clicked.connect(self.checkChanged)
self.ui.default_config.clicked.connect(self.configChecked)
self.ui.actionHome.triggered.connect(self.resetHome)
self.frame = frameSet()
self.kinect = None
# self.imu = None
self.imu = []
self.timer = QtCore.QTimer(self)
self.t_fps = QtCore.QTimer(self)
self.fps = 0
self.calib = [False, False]
self.calib_step = 0
self.ui.calibBar.setVisible(False)
self.ui.calibLabel.setVisible(False)
self.ui.shoulder_device_box.setEnabled(True)
self.ui.head_device_box.setEnabled(True)
self.connect(self.timer, QtCore.SIGNAL('timeout()'), self.acquireFrame)
self.connect(self.t_fps, QtCore.SIGNAL('timeout()'), self.updateFPS)
self.connect(self, QtCore.SIGNAL('calibFrameAcquired()'),
self.updateCalibBar)
self.connect(self, QtCore.SIGNAL('calibFrameEnded()'),
self.endUpdateCalibBar)
self.connect(self, QtCore.SIGNAL('triggered()'), self.closeEvent)
def __init__(self, parent=None):
super().__init__(parent)
self.ui = Ui_MainWindow()
self.ui.setupUi(self)
self.ui.pb_start.clicked.connect(self.initiate_comparison_plot)
self.ui.pb_plot.clicked.connect(self.plot_results)
self.ui.pb_comp.clicked.connect(self.comparison_img)
self.ui.cbx_cat_c1.currentTextChanged.connect(self.cat_c1_changed)
self.ui.cbx_cat_c2.currentTextChanged.connect(self.cat_c2_changed)
self.ui.cbx_cat_c3.currentTextChanged.connect(self.cat_c3_changed)
def __init__(self):
super(MainWindow, self).__init__()
self.ui = Ui_MainWindow()
self.ui.setupUi(self)
# 创建一个捕包的类 线程
self.data_capture = Capture(self.ui.show_info_text)
# 因为当数据改变是我们需要data_statistics发出相应的信号，这样我们就可以实现界面中
# 数据的变化
self.data_statistics = self.data_capture.rec.proto_restore.statistic
# 捕包状态
self.cap_state = False
self.init_widget()
def __init__(self):
super(MainWindow, self).__init__()
# Set up the user interface from Designer.
self.ui = Ui_MainWindow()
self.ui.setupUi(self)
self.setWindowTitle("Kepler Manager")
self.viewer = Viewer()
self.viewer3d = Viewer3D()
self.tableViewer = TableViewer()
self.caldialog = CalDialog()
self.errdialog = ErrDialog()
self.cal_stop = False
regexp = QRegExp("[0-9e\.\+\-\*\(\)/]*")
validator = QRegExpValidator(regexp)
self.ui.lineEdit_G.setValidator(validator)
self.ui.lineEdit_TimeIncrement.setValidator(validator)
self.ui.lineEdit_StopTime.setValidator(validator)
#self.ui.actionAbout_Kepler.triggered.connect(self.about_Kepler)
#self.ui.actionPreference.triggered.connect(self.preference)
self.ui.actionSave.triggered.connect(self.save_file)
self.ui.actionLoad_your_settings.triggered.connect(self.load_file)
self.ui.actionLoad_SOL.triggered.connect(self.load_SOL)
self.ui.actionViewer.triggered.connect(self.open_viewer)
#self.ui.actionTable_Viewer.triggered.connect(self.open_tableviewer)
#self.ui.actionHow_to_use.triggered.connect(self.show_help)
#self.ui.actionHow_does_this_work.triggered.connect(self.show_mechanism)
#self.ui.comboBox_Choose2Dor3D.currentIndexChanged.connect(self.choose2dor3d)
self.ui.pushButton_AddPlanet.clicked.connect(self.add_planet)
self.ui.pushButton_DeletePlanet.clicked.connect(self.remove_planets)
self.ui.lineEdit_G.setText("6.674e-11")
self.ui.pushButton_Calc.clicked.connect(self.calc)
self.planets_attribute = TreeViewModel()
self.planets = Planet_system()
self.resultcontainer = ResultContainer()
self.ui.treeView_PlanetAttribute.setModel(self.planets_attribute)
self.ui.treeView_PlanetAttribute.setItemDelegate(Delegate())
def __init__(self):
self.app = QtGui.QApplication(sys.argv)
self.app.setApplicationName("Plots! Plots! Plots!")
self.app.setStyleSheet(qdarkstyle.load_stylesheet())
# self.app.setStyle(QtGui.QGtkStyle())
self.plotter = None
self.state = {"started": False, "fullscreen": False}
super().__init__()
self.ui = Ui_MainWindow()
self.ui.setupUi(self)
self.validateUi()
self.addPlotWidget()
self.setupGuiBindings()
class MainWindow(QtWidgets.QMainWindow):
def __init__(self, parent=None):
super().__init__(parent)
self.ui = Ui_MainWindow()
self.ui.setupUi(self)
self.ui.pb_start.clicked.connect(self.initiate_comparison_plot)
self.ui.pb_plot.clicked.connect(self.plot_results)
self.ui.pb_comp.clicked.connect(self.comparison_img)
self.ui.cbx_cat_c1.currentTextChanged.connect(self.cat_c1_changed)
self.ui.cbx_cat_c2.currentTextChanged.connect(self.cat_c2_changed)
self.ui.cbx_cat_c3.currentTextChanged.connect(self.cat_c3_changed)
def initiate_comparison_plot(self):
self.ui.cbx_comp.clear()
model_comp = files_in_folder(comp_folder)
inp_models = files_in_folder(db_folder)
self.ui.cbx_comp.addItems(model_comp)
# hier das abrufen und populieren der CBX
def cat_c1_changed(self):
self.ui.cbx_scat_c1.clear()
cat1 = self.ui.cbx_cat_c1.currentText()
res_pres = ['-']
res_u = ['x', 'y', 'z']
res_str = ['tot', 's1', 's2', 's3', 'sxx', 'syy', 'szz', 'sxy', 'syz', 'sxz']
if cat1 == "pressure":
self.ui.cbx_scat_c1.addItems(res_pres)
elif cat1 == "u":
self.ui.cbx_scat_c1.addItems(res_u)
elif cat1 == "stress":
self.ui.cbx_scat_c1.addItems(res_str)
elif cat1 == "estress":
self.ui.cbx_scat_c1.addItems(res_str)
elif cat1 == "el. strain":
self.ui.cbx_scat_c1.addItems(res_str)
elif cat1 == "pl. strain":
self.ui.cbx_scat_c1.addItems(res_str)
elif cat1 == "tot. strain":
self.ui.cbx_scat_c1.addItems(res_str)
else:
self.ui.cbx_scat_c1.addItems(" ")
def cat_c2_changed(self):
self.ui.cbx_scat_c2.clear()
cat1 = self.ui.cbx_cat_c2.currentText()
res_pres = ['-']
res_u = ['x', 'y', 'z']
res_str = ['tot', 's1', 's2', 's3', 'sxx', 'syy', 'szz', 'sxy', 'syz', 'sxz']
if cat1 == "pressure":
self.ui.cbx_scat_c2.addItems(res_pres)
elif cat1 == "u":
self.ui.cbx_scat_c2.addItems(res_u)
elif cat1 == "stress":
self.ui.cbx_scat_c2.addItems(res_str)
elif cat1 == "estress":
self.ui.cbx_scat_c2.addItems(res_str)
elif cat1 == "el. strain":
self.ui.cbx_scat_c2.addItems(res_str)
elif cat1 == "pl. strain":
self.ui.cbx_scat_c2.addItems(res_str)
elif cat1 == "tot. strain":
self.ui.cbx_scat_c2.addItems(res_str)
else:
self.ui.cbx_scat_c2.addItems(" ")
def cat_c3_changed(self):
self.ui.cbx_scat_c3.clear()
cat1 = self.ui.cbx_cat_c3.currentText()
res_pres = ['-']
res_u = ['x', 'y', 'z']
res_str = ['tot', 's1', 's2', 's3', 'sxx', 'syy', 'szz', 'sxy', 'syz', 'sxz']
if cat1 == "pressure":
self.ui.cbx_scat_c3.addItems(res_pres)
elif cat1 == "u":
self.ui.cbx_scat_c3.addItems(res_u)
elif cat1 == "stress":
self.ui.cbx_scat_c3.addItems(res_str)
elif cat1 == "estress":
self.ui.cbx_scat_c3.addItems(res_str)
elif cat1 == "el. strain":
self.ui.cbx_scat_c3.addItems(res_str)
elif cat1 == "pl. strain":
self.ui.cbx_scat_c3.addItems(res_str)
elif cat1 == "tot. strain":
self.ui.cbx_scat_c3.addItems(res_str)
else:
self.ui.cbx_scat_c3.addItems(" ")
def plot_results(self):
user_cat_c1 = self.ui.cbx_cat_c1.currentText()
user_cat_c2 = self.ui.cbx_cat_c2.currentText()
user_cat_c3 = self.ui.cbx_cat_c3.currentText()
user_subcat_c1 = self.ui.cbx_scat_c1.currentText()
user_subcat_c2 = self.ui.cbx_scat_c2.currentText()
user_subcat_c3 = self.ui.cbx_scat_c3.currentText()
user_cshades = int(self.ui.cshades.value())
user_zoomx = self.ui.zoom_x.value()
user_zoomy = self.ui.zoom_y.value()
user_zoomext = self.ui.zoom_ext.value()
col_map = 'Greys'
user_resolution = int(self.ui.resolution.value())
key_f1 = user_cat_c1 + '-' + user_subcat_c1
key_f2 = user_cat_c2 + '-' + user_subcat_c2
key_f3 = user_cat_c3 + '-' + user_subcat_c3
if self.ui.cbox_zoom.isChecked():
xi_1 = np.linspace(user_zoomx - 0.5 * user_zoomext, user_zoomx + 0.5 * user_zoomext, user_resolution)
yi_1 = np.linspace(user_zoomy - 0.5 * user_zoomext, user_zoomy + 0.5 * user_zoomext, user_resolution)
else:
xi_1 = np.linspace(-500, 500, user_resolution)
yi_1 = np.linspace(-500, 500, user_resolution)
model_comp_current = [self.ui.cbx_comp.currentText()]
inp_models = files_in_folder(db_folder)
# Calculate Min-Max Values of all models
# Get all Min-Max-Values from DB-models
min_all_1, max_all_1 = grad_db(db_var, inp_models, input_output, key_f1)
min_all_2, max_all_2 = grad_db(db_var, inp_models, input_output, key_f2)
min_all_3, max_all_3 = grad_db(db_var, inp_models, input_output, key_f3)
# Get all Min-Max-Values from Comp-model
min_i_1, max_i_1 = grad_db(comp_var, model_comp_current, input_output, key_f1)
min_i_2, max_i_2 = grad_db(comp_var, model_comp_current, input_output, key_f2)
min_i_3, max_i_3 = grad_db(comp_var, model_comp_current, input_output, key_f3)
# Select min-max-values for all models in comparison
minm_1, maxm_1 = grad_all(min_all_1, max_all_1, min_i_1, max_i_1)
minm_2, maxm_2 = grad_all(min_all_2, max_all_2, min_i_2, max_i_2)
minm_3, maxm_3 = grad_all(min_all_3, max_all_3, min_i_3, max_i_3)
def pic_creation(var, models, folder, data_format, inp_out, key, min_val, max_val, cshades, cmap, xi, yi):
for i in models:
model_paths = predef_paths(var, i)
# Calculations
results_mod = ans_csvdataimp_complete(model_paths)
# generate df for plotting
xval, yval, zval, chead, output_title = plot_df(results_mod, inp_out, key)
# define graduation
user_graduation = np.linspace(min_val, max_val, cshades, endpoint=True)
# define Colormap
colm = colormap(cmap)
# Plotting - general settings
fig = plt.figure(figsize=(10, 10))
spec = gridspec.GridSpec(ncols=1, nrows=1)
# figure 1
# model1
fig_img = fig.add_subplot(spec[0, 0])
# Contour plot
zi = griddata((xval, yval), zval, (xi[None, :], yi[:, None]), method='linear')
cf_f1_1 = plt.contourf(xi, yi, zi, user_graduation, cmap=colm)
fig_img.axes.get_xaxis().set_visible(False)
fig_img.axes.get_yaxis().set_visible(False) # Achsen unsichtbar machen
# plt.ylabel(i)
# plt.title(output_title)
# fig.colorbar(cf_f1_1)
plt.savefig(folder + i + data_format, bbox_inches='tight')
plt.close()
# plt.show()
pic_creation(db_var, inp_models, fdb_1, data_format, input_output, key_f1, minm_1, maxm_1, user_cshades,
col_map, xi_1, yi_1)
pic_creation(db_var, inp_models, fdb_2, data_format, input_output, key_f2, minm_2, maxm_2, user_cshades,
col_map, xi_1, yi_1)
pic_creation(db_var, inp_models, fdb_3, data_format, input_output, key_f3, minm_3, maxm_3, user_cshades,
col_map, xi_1, yi_1)
pic_creation(comp_var, model_comp_current, fcomp_1, data_format, input_output, key_f1, minm_1, maxm_1,
user_cshades, col_map, xi_1, yi_1)
pic_creation(comp_var, model_comp_current, fcomp_2, data_format, input_output, key_f2, minm_2, maxm_2,
user_cshades, col_map, xi_1, yi_1)
pic_creation(comp_var, model_comp_current, fcomp_3, data_format, input_output, key_f3, minm_3, maxm_3,
user_cshades, col_map, xi_1, yi_1)
def comparison_img(self):
model_comp_pic_1 = files_in_folder(fcomp_1)
model_comp_pic_2 = files_in_folder(fcomp_2)
model_comp_pic_3 = files_in_folder(fcomp_3)
inp_models_pic_1 = files_in_folder(fdb_1)
inp_models_pic_2 = files_in_folder(fdb_2)
inp_models_pic_3 = files_in_folder(fdb_3)
inp_models_csv = files_in_folder_png(fdb_1)
for i in model_comp_pic_1:
path1 = fcomp_1 + i
for i in model_comp_pic_2:
path2 = fcomp_2 + i
for i in model_comp_pic_3:
path3 = fcomp_3 + i
def compare_ssim_all(inp_models, db_folder, path):
list_scores = []
imageB = cv2.imread(path, cv2.IMREAD_COLOR)
for i in inp_models:
# load the two input images
imageA = cv2.imread(db_folder + i, cv2.IMREAD_COLOR)
# convert the images to grayscale
grayA = cv2.cvtColor(imageA, cv2.COLOR_BGR2GRAY)
grayB = cv2.cvtColor(imageB, cv2.COLOR_BGR2GRAY)
# compute the Structural Similarity Index (SSIM) between the two
# images, ensuring that the difference image is returned
(score, diff) = structural_similarity(grayA, grayB, full=True)
diff = (diff * 255).astype("uint8")
#print("SSIM: {}".format(score))
list_scores.append(score)
max_ind = list_scores.index(max(list_scores))
return max_ind
def plot_max_ssim(max_ind1, max_ind2, max_ind3):
user_cat_c1 = self.ui.cbx_cat_c1.currentText()
user_cat_c2 = self.ui.cbx_cat_c2.currentText()
user_cat_c3 = self.ui.cbx_cat_c3.currentText()
user_subcat_c1 = self.ui.cbx_scat_c1.currentText()
user_subcat_c2 = self.ui.cbx_scat_c2.currentText()
user_subcat_c3 = self.ui.cbx_scat_c3.currentText()
user_cshades = int(self.ui.cshades.value())
user_zoomx = self.ui.zoom_x.value()
user_zoomy = self.ui.zoom_y.value()
user_zoomext = self.ui.zoom_ext.value()
user_colormap = str(self.ui.cbx_legend.currentText())
user_min_c1 = self.ui.min_fig1.value()
user_min_c2 = self.ui.min_fig2.value()
user_min_c3 = self.ui.min_fig3.value()
user_max_c1 = self.ui.max_fig1.value()
user_max_c2 = self.ui.max_fig2.value()
user_max_c3 = self.ui.max_fig3.value()
user_comp_mod = self.ui.cbx_comp.currentText()
user_resolution = int(self.ui.resolution.value())
key_f1 = user_cat_c1 + '-' + user_subcat_c1
key_f2 = user_cat_c2 + '-' + user_subcat_c2
key_f3 = user_cat_c3 + '-' + user_subcat_c3
if self.ui.cbox_zoom.isChecked():
xi_1 = np.linspace(user_zoomx - 0.5 * user_zoomext, user_zoomx + 0.5 * user_zoomext, user_resolution)
yi_1 = np.linspace(user_zoomy - 0.5 * user_zoomext, user_zoomy + 0.5 * user_zoomext, user_resolution)
else:
xi_1 = np.linspace(-500, 500, user_resolution)
yi_1 = np.linspace(-500, 500, user_resolution)
model_comp_csv = comp_folder + '/' + user_comp_mod + '.csv'
model_comp_png1 = fcomp_1 + user_comp_mod + '.png'
model_comp_png2 = fcomp_2 + user_comp_mod + '.png'
model_comp_png3 = fcomp_3 + user_comp_mod + '.png'
inp_csv = files_in_folder_png(fdb_1)
model_db_csv1 = db_folder + '/' + inp_csv[max_ind1] + '.csv'
model_db_csv2 = db_folder + '/' + inp_csv[max_ind2] + '.csv'
model_db_csv3 = db_folder + '/' + inp_csv[max_ind3] + '.csv'
model_db_png1 = fdb_1 + inp_csv[max_ind1] + '.png'
model_db_png2 = fdb_2 + inp_csv[max_ind2] + '.png'
model_db_png3 = fdb_3 + inp_csv[max_ind3] + '.png'
# Calculations
results_mod_comp = ans_csvdataimp_complete(model_comp_csv)
results_mod_db1 = ans_csvdataimp_complete(model_db_csv1)
results_mod_db2 = ans_csvdataimp_complete(model_db_csv2)
results_mod_db3 = ans_csvdataimp_complete(model_db_csv3)
# generate df for plotting
xval_c1, yval_c1, zval_c1, chead_c1, output_title_c1 = plot_df(results_mod_comp, input_output, key_f1)
xval_c2, yval_c2, zval_c2, chead_c2, output_title_c2 = plot_df(results_mod_comp, input_output, key_f2)
xval_c3, yval_c3, zval_c3, chead_c3, output_title_c3 = plot_df(results_mod_comp, input_output, key_f3)
xval_db1, yval_db1, zval_db1, chead_db1, output_title_db1 = plot_df(results_mod_db1, input_output, key_f1)
xval_db2, yval_db2, zval_db2, chead_db2, output_title_db2 = plot_df(results_mod_db2, input_output, key_f2)
xval_db3, yval_db3, zval_db3, chead_db3, output_title_db3 = plot_df(results_mod_db3, input_output, key_f3)
if self.ui.cbox_man_1.isChecked():
min_f1 = user_min_c1
max_f1 = user_max_c1
else:
min_f1, max_f1 = graduation(results_mod_comp, results_mod_db1, input_output, key_f1)
if self.ui.cbox_man_2.isChecked():
min_f2 = user_min_c2
max_f2 = user_max_c2
else:
min_f2, max_f2 = graduation(results_mod_comp, results_mod_db2, input_output, key_f2)
if self.ui.cbox_man_3.isChecked():
min_f3 = user_min_c3
max_f3 = user_max_c3
else:
min_f3, max_f3 = graduation(results_mod_comp, results_mod_db3, input_output, key_f3)
# define graduation
user_graduation_f1 = np.linspace(min_f1, max_f1, user_cshades, endpoint=True)
user_graduation_f2 = np.linspace(min_f2, max_f2, user_cshades, endpoint=True)
user_graduation_f3 = np.linspace(min_f3, max_f3, user_cshades, endpoint=True)
# define Colormap
colm = colormap(user_colormap)
#### Generation of diff image
def compare_ssim(path_c, path_db):
# load the two input images
imageA = cv2.imread(path_c, cv2.IMREAD_COLOR)
imageB = cv2.imread(path_db, cv2.IMREAD_COLOR)
# convert the images to grayscale
grayA = cv2.cvtColor(imageA, cv2.COLOR_BGR2GRAY)
grayB = cv2.cvtColor(imageB, cv2.COLOR_BGR2GRAY)
# compute the Structural Similarity Index (SSIM) between the two
# images, ensuring that the difference image is returned
(score, diff) = structural_similarity(grayA, grayB, full=True)
diff = (diff * 255).astype("uint8")
#print("SSIM: {}".format(score))
return diff, score
diff_1, score1 = compare_ssim(model_comp_png1, model_db_png1)
diff_2, score2 = compare_ssim(model_comp_png2, model_db_png2)
diff_3, score3 = compare_ssim(model_comp_png3, model_db_png3)
# threshold the difference image, followed by finding contours to
# obtain the regions of the two input images that differ
# thresh = cv2.threshold(diff, 0, 255, cv2.THRESH_BINARY_INV | cv2.THRESH_OTSU)[1]
# cnts = cv2.findContours(thresh.copy(), cv2.RETR_EXTERNAL, cv2.CHAIN_APPROX_SIMPLE)
# cnts = imutils.grab_contours(cnts)
# loop over the contours
# for c in cnts:
# compute the bounding box of the contour and then draw the
# bounding box on both input images to represent where the two
# images differ
# (x, y, w, h) = cv2.boundingRect(c)
# cv2.rectangle(imageA, (x, y), (x + w, y + h), (0, 0, 255), 2)
# cv2.rectangle(imageB, (x, y), (x + w, y + h), (0, 0, 255), 2)
# show the output images
# cv2.imshow('Original', imageA)
# cv2.imshow(inp_models_pic[max_ind], imageB)
# cv2.imshow("Diff1", diff_1)
# cv2.imshow("Diff2", diff_2)
# cv2.imshow("Diff3", diff_3)
# cv2.imshow("Thresh", thresh)
# cv2.waitKey(0)
# Plotting - general settings
# figure 1
# Plotting - general settings
fig = plt.figure(constrained_layout=True, figsize=(15, 15))
spec = gridspec.GridSpec(ncols=3, nrows=3, figure=fig)
# figure 1
# figure 1
f1_ax1 = fig.add_subplot(spec[0, 0])
# Contour plot
zi_1a = griddata((xval_c1, yval_c1), zval_c1, (xi_1[None, :], yi_1[:, None]), method='linear')
cf_f1_1 = plt.contourf(xi_1, yi_1, zi_1a, user_graduation_f1, cmap=colm)
f1_ax1.axes.get_xaxis().set_visible(False) # Achsen unsichtbar machen
plt.ylabel(user_comp_mod)
plt.title(output_title_c1)
f1_ax2 = fig.add_subplot(spec[1, 0])
# Contour plot
zi_1b = griddata((xval_db1, yval_db1), zval_db1, (xi_1[None, :], yi_1[:, None]), method='linear')
cf_f1_2 = plt.contourf(xi_1, yi_1, zi_1b, user_graduation_f1, cmap=colm)
plt.ylabel(inp_csv[max_ind1])
fig.colorbar(cf_f1_1, location='bottom')
# Diffplot
f1_ax3 = fig.add_subplot(spec[2, 0])
cf_f1_3 = plt.imshow(diff_1, cmap='Greys_r')
plt.title("SSIM: {}".format(score1))
f1_ax3.axes.get_xaxis().set_visible(False)
f1_ax3.axes.get_yaxis().set_visible(False)
fig.colorbar(cf_f1_3, location='bottom')
# figure 2
f2_ax1 = fig.add_subplot(spec[0, 1])
zi_2a = griddata((xval_c2, yval_c2), zval_c2, (xi_1[None, :], yi_1[:, None]), method='linear')
cf_f2_1 = plt.contourf(xi_1, yi_1, zi_2a, user_graduation_f2, cmap=colm)
f2_ax1.axes.get_xaxis().set_visible(False)
# f2_ax1.axes.get_yaxis().set_visible(False)
plt.title(output_title_c2)
f2_ax2 = fig.add_subplot(spec[1, 1])
# Contour plot
zi_2b = griddata((xval_db2, yval_db2), zval_db2, (xi_1[None, :], yi_1[:, None]), method='linear')
cf_f2_2 = plt.contourf(xi_1, yi_1, zi_2b, user_graduation_f2, cmap=colm)
# f2_ax2.axes.get_yaxis().set_visible(False)
plt.ylabel(inp_csv[max_ind2])
fig.colorbar(cf_f2_1, location='bottom')
# Diffplot
f2_ax3 = fig.add_subplot(spec[2, 1])
cf_f2_3 = plt.imshow(diff_2, cmap='Greys_r')
plt.title("SSIM: {}".format(score2))
f2_ax3.axes.get_xaxis().set_visible(False)
f2_ax3.axes.get_yaxis().set_visible(False)
fig.colorbar(cf_f2_3, location='bottom')
# figure 3
f3_ax1 = fig.add_subplot(spec[0, 2])
zi_3a = griddata((xval_c3, yval_c3), zval_c3, (xi_1[None, :], yi_1[:, None]), method='linear')
cf_f3_1 = plt.contourf(xi_1, yi_1, zi_3a, user_graduation_f3, cmap=colm)
f3_ax1.axes.get_xaxis().set_visible(False)
# f3_ax1.axes.get_yaxis().set_visible(False)
plt.title(output_title_c3)
f3_ax2 = fig.add_subplot(spec[1, 2])
zi_3b = griddata((xval_db3, yval_db3), zval_db3, (xi_1[None, :], yi_1[:, None]), method='linear')
cf_f3_2 = plt.contourf(xi_1, yi_1, zi_3b, user_graduation_f3, cmap=colm)
# f3_ax2.axes.get_yaxis().set_visible(False)
plt.ylabel(inp_csv[max_ind3])
fig.colorbar(cf_f3_1, location='bottom')
# Diffplot
f3_ax3 = fig.add_subplot(spec[2, 2])
cf_f3_3 = plt.imshow(diff_3, cmap='Greys_r')
plt.title("SSIM: {}".format(score1))
f3_ax3.axes.get_xaxis().set_visible(False)
f3_ax3.axes.get_yaxis().set_visible(False)
fig.colorbar(cf_f3_3, location='bottom')
plt.show()
max_ind1 = compare_ssim_all(inp_models_pic_1, fdb_1, path1)
max_ind2 = compare_ssim_all(inp_models_pic_2, fdb_2, path2)
max_ind3 = compare_ssim_all(inp_models_pic_3, fdb_3, path3)
plot_max_ssim(max_ind1, max_ind2, max_ind3)
class applicationForm(QtGui.QMainWindow):
def __init__(self, parent=None):
QtGui.QWidget.__init__(self, parent)
self.ui = Ui_MainWindow()
self.ui.setupUi(self)
self.saveForm = None
self.testForm = None
self.ui.kinect_radio.setIcon(
QtGui.QIcon("resources/images/kinect2.png"))
self.ui.imu_radio.setIcon(QtGui.QIcon("resources/images/IMU.png"))
self.ui.kinect_imu_radio.setIcon(
QtGui.QIcon("resources/images/kinectIMU.png"))
self.ui.kinect_radio.setIconSize(QtCore.QSize(100, 100))
self.ui.imu_radio.setIconSize(QtCore.QSize(100, 100))
self.ui.kinect_imu_radio.setIconSize(QtCore.QSize(100, 100))
self.ui.start_btn.clicked.connect(self.startAcquisition)
self.ui.start_btn.clicked.connect(self.resetGUI)
self.ui.imu_radio.clicked.connect(self.checkChanged)
self.ui.kinect_imu_radio.clicked.connect(self.checkChanged)
self.ui.kinect_radio.clicked.connect(self.checkChanged)
self.ui.save_radio.clicked.connect(self.checkChanged)
self.ui.test_radio.clicked.connect(self.checkChanged)
self.ui.default_config.clicked.connect(self.configChecked)
self.ui.actionHome.triggered.connect(self.resetHome)
self.frame = frameSet()
self.kinect = None
# self.imu = None
self.imu = []
self.timer = QtCore.QTimer(self)
self.t_fps = QtCore.QTimer(self)
self.fps = 0
self.calib = [False, False]
self.calib_step = 0
self.ui.calibBar.setVisible(False)
self.ui.calibLabel.setVisible(False)
self.ui.shoulder_device_box.setEnabled(True)
self.ui.head_device_box.setEnabled(True)
self.connect(self.timer, QtCore.SIGNAL('timeout()'), self.acquireFrame)
self.connect(self.t_fps, QtCore.SIGNAL('timeout()'), self.updateFPS)
self.connect(self, QtCore.SIGNAL('calibFrameAcquired()'),
self.updateCalibBar)
self.connect(self, QtCore.SIGNAL('calibFrameEnded()'),
self.endUpdateCalibBar)
self.connect(self, QtCore.SIGNAL('triggered()'), self.closeEvent)
def closeEvent(self, event):
# if self.imu is not None:
if len(self.imu) > 0:
print "Killing IMU thread(s)"
# self.imu.close()
for imu in self.imu:
imu.close()
self.close()
self.destroy()
def calibration(self):
msg = QtGui.QMessageBox()
msg.setIcon(QtGui.QMessageBox.Information)
msg.setText("IMU calibration is going to be performed")
msg.setInformativeText(
"Calibration needs a few seconds to complete. \nKeep your head as still as possible"
)
msg.setWindowTitle("Calibration")
msg.setStandardButtons(QtGui.QMessageBox.Ok | QtGui.QMessageBox.Cancel)
ret = msg.exec_()
if ret == QtGui.QMessageBox.Ok:
self.calib = [True, True]
self.calib_step = 0
self.ui.calibBar.reset()
self.ui.calibBar.setValue(0)
self.ui.calibLabel.setText("Calibrating...")
self.ui.calibBar.setVisible(True)
self.ui.calibLabel.setVisible(True)
def endUpdateCalibBar(self):
self.calib_step = 0
self.ui.calibLabel.setText("Calibration completed!")
def updateCalibBar(self):
self.calib_step += 1
self.ui.calibBar.setValue(
(self.calib_step / self.ui.numIMUBox.value()) * 100 /
CALIBRATION_FRAMES)
def startAcquisition(self):
# if self.ui.test_radio.isChecked():
# if self.ui.kinect_radio.isChecked():
# acquisitionKinect.test()
# if self.ui.imu_radio.isChecked():
# acquisitionIMU.test()
self.ui.sensor_label.setText("Trying to connect to given sensor(s)...")
if self.ui.kinect_radio.isChecked(
) or self.ui.kinect_imu_radio.isChecked():
self.kinect = acquisitionKinect.AcquisitionKinect()
if self.ui.kinect_imu_radio.isChecked() or self.ui.imu_radio.isChecked(
):
numIMU = self.ui.numIMUBox.value()
for ni in xrange(numIMU):
if self.ui.default_config.isChecked():
auto_calib = False
imu = acquisitionIMU.AcquisitionIMU(auto_calib=auto_calib)
else:
# TODO: mettere possibilita load calibration e save calibration
auto_calib = str(self.ui.calib_box.currentText())
if auto_calib == "Auto":
auto_calib = True
else:
auto_calib = False
port = ""
if ni == 0:
port = str(self.ui.head_device_box.currentText())
elif ni == 1:
port = str(self.ui.shoulder_device_box.currentText())
imu = acquisitionIMU.AcquisitionIMU(
port=port,
save_conf=str(
self.ui.save_box.currentText()) == "True",
auto_calib=auto_calib,
accelerometer=str(self.ui.accel_box.currentText()),
gyro=str(self.ui.gyro_box.currentText()),
algo=str(self.ui.algo_box.currentText()),
sample_rate=str(self.ui.rate_box.currentText()),
frameType=ni)
if auto_calib:
msg = QtGui.QMessageBox()
msg.setIcon(QtGui.QMessageBox.Information)
msg.setText("IMU calibration is going to be performed")
msg.setInformativeText(
"Keep your head as still as possible")
msg.setWindowTitle("Calibration")
msg.setStandardButtons(QtGui.QMessageBox.Ok)
msg.exec_()
imu.run()
self.imu.append(imu)
self.ui.sensor_label.setText("Connection established!")
if self.ui.save_radio.isChecked():
self.saveForm = saveForm(IMU=not self.ui.kinect_radio.isChecked())
self.saveForm.setParent(self.ui.widget)
self.saveForm.show()
self.ui.widget.setVisible(True)
self.connect(self.saveForm, QtCore.SIGNAL('calibrationRequest()'),
self.calibration)
if self.ui.test_radio.isChecked():
self.testForm = testForm()
self.testForm.setParent(self.ui.widget)
self.testForm.show()
self.ui.widget.setVisible(True)
self.connect(self.testForm, QtCore.SIGNAL('calibrationRequest()'),
self.calibration)
self.timer.start(40)
self.t_fps.start(500)
def updateFPS(self):
fps = self.fps / 0.500
self.ui.labelFPS.setText("%.2f" % fps)
self.fps = 0
def resetGUI(self):
image = np.zeros((self.ui.RGB_label.size().width(),
self.ui.RGB_label.size().height()))
image = QtGui.QImage(image, image.shape[1], image.shape[0],
image.shape[1], QtGui.QImage.Format_Indexed8)
pix = QtGui.QPixmap(image).scaled(self.ui.Depth_label.size())
self.ui.Depth_label.setPixmap(pix)
pix = QtGui.QPixmap(image).scaled(self.ui.RGB_label.size())
self.ui.RGB_label.setPixmap(pix)
self.ui.mainframe.hide()
def resetHome(self):
self.frame = frameSet()
if self.saveForm is not None:
if self.saveForm.process is not None:
self.saveForm.process.kill()
self.saveForm.process = None
self.saveForm.close()
self.saveForm = None
if self.testForm is not None:
self.testForm.close()
self.testForm = None
if self.kinect is not None:
self.kinect.close()
self.kinect = None
# if self.imu is not None:
# self.imu.close()
# self.imu = None
if len(self.imu) > 0:
for imu in self.imu:
imu.close()
self.imu = []
self.resetGUI()
self.ui.mainframe.show()
def checkChanged(self):
if self.ui.kinect_imu_radio.isChecked() or self.ui.imu_radio.isChecked(
):
self.ui.imu_settings_box.setEnabled(True)
elif not self.ui.kinect_imu_radio.isChecked(
) and not self.ui.imu_radio.isChecked():
self.ui.imu_settings_box.setEnabled(False)
if (self.ui.save_radio.isChecked() or self.ui.test_radio.isChecked()
) and (self.ui.kinect_imu_radio.isChecked()
or self.ui.imu_radio.isChecked()
or self.ui.kinect_radio.isChecked()):
self.ui.start_btn.setEnabled(True)
else:
self.ui.start_btn.setEnabled(False)
def configChecked(self):
if self.ui.default_config.isChecked():
self.ui.frame_settings.setEnabled(False)
else:
self.ui.frame_settings.setEnabled(True)
def acquireFrame(self):
self.frame = frameSet()
if self.kinect is not None:
self.kinect.get_frame(self.frame)
# if self.imu is not None:
if len(self.imu) > 0:
for nimu, imu in enumerate(self.imu):
imu.get_frame(self.frame)
if self.calib[nimu]:
self.emit(QtCore.SIGNAL('calibFrameAcquired()'))
if imu.calibrate(self.frame):
self.emit(QtCore.SIGNAL('calibFrameEnded()'))
self.calib[nimu] = False
if self.saveForm is not None:
self.saveForm.saveFrame(self.frame)
if self.testForm is not None:
self.testForm.showFrame(self.frame)
self.updateUI()
def updateUI(self):
if self.frame.frameRGB is not None:
image = cv2.cvtColor(self.frame.frameRGB, cv2.COLOR_BGRA2RGB)
# image = self.frame.frameRGB
else:
image = np.zeros((self.ui.RGB_label.size().width(),
self.ui.RGB_label.size().height(), 3))
image = QtGui.QImage(image, image.shape[1], image.shape[0],
image.shape[1] * 3, QtGui.QImage.Format_RGB888)
pix = QtGui.QPixmap(image).scaled(self.ui.RGB_label.size())
self.ui.RGB_label.setPixmap(pix)
if self.frame.frameDepthQuantized is not None:
image = cv2.cvtColor(self.frame.frameDepthQuantized,
cv2.COLOR_GRAY2RGB)
self.fps += 1
if self.ui.save_radio.isChecked():
if self.frame.body_tracked:
calibMatrix = np.array([[391.096, 0, 243.892],
[0, 463.098, 208.922], [0, 0, 1]])
headCenter = self.frame.bodyJoints[3]
shoulderRightJoint = self.frame.bodyJoints[4]
shoulderLeftJoint = self.frame.bodyJoints[8]
R = 250.0
Z = self.frame.frameDepthQuantized[int(
headCenter.y), int(headCenter.x)] * 8 + 500
w = int(calibMatrix[0, 0] * R / Z)
h = int(calibMatrix[1, 1] * R / Z)
x1 = int(headCenter.x - w / 2)
y1 = int(headCenter.y - h / 2)
x2 = int(headCenter.x + w / 2)
y2 = int(headCenter.y + h / 2)
cv2.circle(image, (int(headCenter.x), int(headCenter.y)),
7, (0, 255, 0), -1)
cv2.circle(
image,
(int(shoulderRightJoint.x), int(shoulderRightJoint.y)),
7, (127, 0, 127), -1)
cv2.circle(
image,
(int(shoulderLeftJoint.x), int(shoulderLeftJoint.y)),
7, (127, 0, 127), -1)
else:
h, w = image.shape[0:2]
x1 = int(w / 2 - w / 10)
y1 = int(h / 2 - h / 7)
x2 = int(w / 2 + w / 10)
y2 = int(h / 2 + h / 8)
cv2.rectangle(image, (x1, y1), (x2, y2), (255, 0, 0), 2)
else:
image = np.zeros((self.ui.Depth_label.size().width(),
self.ui.Depth_label.size().height(), 3))
image = QtGui.QImage(image, image.shape[1], image.shape[0],
image.shape[1] * 3, QtGui.QImage.Format_RGB888)
pix = QtGui.QPixmap(image).scaled(self.ui.Depth_label.size())
self.ui.Depth_label.setPixmap(pix)
class MainWindow(QtGui.QMainWindow):
# signals
start = QtCore.Signal()
stop = QtCore.Signal()
reset = QtCore.Signal()
def __init__(self):
self.app = QtGui.QApplication(sys.argv)
self.app.setApplicationName("Plots! Plots! Plots!")
self.app.setStyleSheet(qdarkstyle.load_stylesheet())
# self.app.setStyle(QtGui.QGtkStyle())
self.plotter = None
self.state = {"started": False, "fullscreen": False}
super().__init__()
self.ui = Ui_MainWindow()
self.ui.setupUi(self)
self.validateUi()
self.addPlotWidget()
self.setupGuiBindings()
def validateUi(self):
"""
Since mainwindow.py is generated from a UI file we run
a few checks to validate the basic UI components are there
"""
assert hasattr(self.ui, "startStopButton")
assert hasattr(self.ui, "resetButton")
def addPlotWidget(self):
del self.ui.placeholder
self.plotWidget = pg.GraphicsLayoutWidget()
self.ui.horizontalLayout.addWidget(self.plotWidget)
self.plotter = Plotter(self.plotWidget)
self.plotter.setup()
def setNbColumns(self, n):
settings.PLOTS_PER_ROw = n
self.plotter.refresh_grid()
def setupGuiBindings(self):
self.ui.startStopButton.clicked.connect(self.startStop)
self.ui.resetButton.clicked.connect(self.plotter.clear)
self.plotter.fpsMessage.connect(self.ui.statusbar.showMessage)
# connect checkboxes with show/hide plots + titles
for i in range(settings.NUMBER_OF_SENSORS):
getattr(self.ui, "show{}".format(i + 1)).setText(settings.plots[i]["title"].format(index=i))
getattr(self.ui, "show{}".format(i + 1)).stateChanged.connect(
lambda state, i=i: self.plotter.set_show_plot(state, i)
)
## menus
self.ui.acqMode = QtGui.QActionGroup(self)
self.ui.acqMode.addAction(self.ui.actionSerial_Acquisition)
self.ui.acqMode.addAction(self.ui.actionFake_Acquisition)
# default
self.ui.actionFake_Acquisition.setChecked(True)
# @todo add a real settings manager
self.ui.columnsSpinBox.valueChanged.connect(self.setNbColumns)
self.ui.showTiming.stateChanged.connect(lambda state: self.plotter.set_show_plot(state, "time"))
self.ui.showMaster.stateChanged.connect(lambda state: self.plotter.set_show_plot(state, "master"))
self.ui.showTitles.stateChanged.connect(self.plotter.set_show_title)
@QtCore.Slot()
def startStop(self):
if self.state["started"]:
self.stop.emit()
self.ui.startStopButton.setText("Start")
else:
self.start.emit()
self.ui.startStopButton.setText("Stop")
self.state["started"] = not self.state["started"]
def show(self):
self.plotter.clear()
super().show()
return self.app.exec_()
def fullscreen(self):
if not "fullscreen" in self.state or not self.state["fullscreen"]:
self.state["fullscreen"] = True
self.ui.menubar.setVisible(False)
self.ui.statusbar.setVisible(False)
self.showFullScreen()
else:
self.state["fullscreen"] = False
self.showNormal()
self.ui.menubar.setVisible(True)
self.ui.statusbar.setVisible(True)
def keyPressEvent(self, e):
if e.key() == QtCore.Qt.Key_F11:
self.fullscreen()
@property
def plots(self):
return self.plotter
class MainWindow(QMainWindow):
def __init__(self):
super(MainWindow, self).__init__()
self.ui = Ui_MainWindow()
self.ui.setupUi(self)
# 创建一个捕包的类 线程
self.data_capture = Capture(self.ui.show_info_text)
# 因为当数据改变是我们需要data_statistics发出相应的信号，这样我们就可以实现界面中
# 数据的变化
self.data_statistics = self.data_capture.rec.proto_restore.statistic
# 捕包状态
self.cap_state = False
self.init_widget()
def init_widget(self):
'''
对主窗口的widget进行初始化，包括初始化widget数据，以及进行事件的绑定。
:return:
'''
# 点击开始捕包按钮进行捕包
self.ui.start_cap_b.clicked.connect(self.start_capture)
self.ui.config_b.clicked.connect(self.show_config)
self.ui.block_b.clicked.connect(self.show_block)
self.ui.index_b.clicked.connect(self.show_index_pollution)
# self.ui.block_b.clicked.connect(self.data_statistics.block)
# 点击tracker信息显示tracker的相关信息
self.ui.show_tracker_info_b.clicked.connect(self.show_tracker_info)
# 点击peers信息显示peers的相关信息
self.ui.show_peers_info_b.clicked.connect(self.show_peers_info)
# self.data_statistic.signal.connect(event)
# 以下代码仅是个例子
#
self.data_statistics.tracker_pkt_cnt_changed.connect(self.change_track_pkt_cnt)
self.data_statistics.peer_pkt_cnt_changed.connect(self.change_peer_pkt_cnt)
self.data_statistics.tracker_info_changed.connect(self.show_tracker_info)
self.data_statistics.peer_info_changed.connect(self.show_peers_info)
#self.data_statistics.peer_pkt_cnt_changed
def show_config(self):
self.config_window = ConfigWindow()
self.config_window.show()
def show_block(self):
self.block_window = BlockWindow()
self.block_window.show()
def show_index_pollution(self):
self.index_pollution_window = IndexPollutionWindow()
self.index_pollution_window.show()
def start_capture(self):
'''
当点击开始捕包按钮时进行捕包
:return:
'''
if self.cap_state is False:
self.ui.show_info_text.append('start capturing!')
# print('start capturing!')
self.cap_state = True
self.data_capture.start()
_translate = QtCore.QCoreApplication.translate
self.ui.start_cap_b.setText(_translate("MainWindow", "停止捕包"))
else:
self.ui.show_info_text.append('stop capturing!')
# print('stop capturing!')
self.cap_state = False
_translate = QtCore.QCoreApplication.translate
self.ui.start_cap_b.setText(_translate("MainWindow", "开始捕包"))
self.data_capture.stop_capture()
def show_tracker_info(self):
'''
点击tracker信息按钮是展示tracker的信息
:return:
'''
# print('show tracker info!')
_translate = QtCore.QCoreApplication.translate
# print(self.data_statistics.tracker_stat)
for row, stat in zip(range(len(self.data_statistics.tracker_stat.values())), self.data_statistics.tracker_stat.values()):
for column, i in zip(range(6), stat.get_info_list()):
item = QtWidgets.QTableWidgetItem()
self.ui.tableWidget.setItem(row, column, item)
item = self.ui.tableWidget.item(row, column)
item.setText(_translate("MainWindow", str(i)))
def show_peers_info(self):
'''
点击peer信息按钮时展示peers的信息
:return:
'''
# print('show peers info1')
_translate = QtCore.QCoreApplication.translate
# print(self.data_statistics.peer_stat)
for row, stat in zip(range(len(self.data_statistics.peer_stat.values())),
self.data_statistics.peer_stat.values()):
for column, i in zip(range(6), stat.get_info_list()):
item = QtWidgets.QTableWidgetItem()
self.ui.tableWidget_2.setItem(row, column, item)
item = self.ui.tableWidget_2.item(row, column)
item.setText(_translate("MainWindow", str(i)))
pass
def change_track_pkt_cnt(self, req_cnt, res_cnt):
self.ui.tracker_req_line.setText(str(req_cnt))
self.ui.tracker_res_line.setText(str(res_cnt))
#
def change_peer_pkt_cnt(self, hs_cnt, msg_cnt):
self.ui.peer_hs_line.setText(str(hs_cnt))
self.ui.peer_msg_line.setText(str(msg_cnt))
class MainWindow(QtWidgets.QMainWindow):
def __init__(self, parent=None):
super().__init__(parent)
self.ui = Ui_MainWindow()
self.ui.setupUi(self)
self.ui.pb_models.clicked.connect(self.models_changed)
self.ui.pb_models_2.clicked.connect(self.models_predefined)
self.ui.pb_plot.clicked.connect(self.plot_results)
self.ui.pb_plot_diff.clicked.connect(self.plot_differences)
self.ui.pb_models.clicked.connect(
lambda: self.ui.stackedWidget.setCurrentIndex(2))
self.ui.pb_models_2.clicked.connect(
lambda: self.ui.stackedWidget.setCurrentIndex(2))
self.ui.pb_select.clicked.connect(
lambda: self.ui.stackedWidget.setCurrentIndex(0))
self.ui.pb_select_2.clicked.connect(
lambda: self.ui.stackedWidget.setCurrentIndex(1))
self.ui.pb_filepath_selec.clicked.connect(
lambda: self.ui.stackedWidget.setCurrentIndex(0))
self.ui.pb_selection.clicked.connect(
lambda: self.ui.stackedWidget.setCurrentIndex(1))
self.ui.cbx_cat_c1.currentTextChanged.connect(self.cat_c1_changed)
self.ui.cbx_cat_c2.currentTextChanged.connect(self.cat_c2_changed)
self.ui.cbx_cat_c3.currentTextChanged.connect(self.cat_c3_changed)
self.ui.cbx_cat_c4.currentTextChanged.connect(self.cat_c4_changed)
self.ui.cbx_inp_depth_m1.currentTextChanged.connect(
self.model1_input_change)
self.ui.cbx_inp_depth_m2.currentTextChanged.connect(
self.model2_input_change)
# input Models
def models_changed(self):
self.ui.cbx_mod1.clear()
self.ui.cbx_mod2.clear()
model1 = self.ui.input_model1.text()
model2 = self.ui.input_model2.text()
models = [str(model1), str(model2)]
self.ui.cbx_mod1.addItems(models)
self.ui.cbx_mod2.addItems(models)
self.ui.radb_freesel.setChecked(True)
def models_predefined(self):
self.ui.cbx_mod1.clear()
self.ui.cbx_mod2.clear()
model1 = self.ui.cbx_inp_model_m1.currentText()
model1_ls = self.ui.cbx_inp_loadstep_m1.currentText()
model2 = self.ui.cbx_inp_model_m2.currentText()
model1_2s = self.ui.cbx_inp_loadstep_m2.currentText()
models = [str(model1 + '_' + model1_ls), str(model2 + '_' + model1_2s)]
self.ui.cbx_mod1.addItems(models)
self.ui.cbx_mod2.addItems(models)
self.ui.radb_predsel.setChecked(True)
def cat_c1_changed(self):
self.ui.cbx_scat_c1.clear()
cat1 = self.ui.cbx_cat_c1.currentText()
res_pres = ['-']
res_u = ['x', 'y', 'z']
res_str = [
'tot', 's1', 's2', 's3', 'sxx', 'syy', 'szz', 'sxy', 'syz', 'sxz'
]
if cat1 == "pressure":
self.ui.cbx_scat_c1.addItems(res_pres)
elif cat1 == "u":
self.ui.cbx_scat_c1.addItems(res_u)
elif cat1 == "stress":
self.ui.cbx_scat_c1.addItems(res_str)
elif cat1 == "estress":
self.ui.cbx_scat_c1.addItems(res_str)
elif cat1 == "el. strain":
self.ui.cbx_scat_c1.addItems(res_str)
elif cat1 == "pl. strain":
self.ui.cbx_scat_c1.addItems(res_str)
elif cat1 == "tot. strain":
self.ui.cbx_scat_c1.addItems(res_str)
else:
self.ui.cbx_scat_c1.addItems(" ")
def cat_c2_changed(self):
self.ui.cbx_scat_c2.clear()
cat1 = self.ui.cbx_cat_c2.currentText()
res_pres = ['-']
res_u = ['x', 'y', 'z']
res_str = [
'tot', 's1', 's2', 's3', 'sxx', 'syy', 'szz', 'sxy', 'syz', 'sxz'
]
if cat1 == "pressure":
self.ui.cbx_scat_c2.addItems(res_pres)
elif cat1 == "u":
self.ui.cbx_scat_c2.addItems(res_u)
elif cat1 == "stress":
self.ui.cbx_scat_c2.addItems(res_str)
elif cat1 == "estress":
self.ui.cbx_scat_c2.addItems(res_str)
elif cat1 == "el. strain":
self.ui.cbx_scat_c2.addItems(res_str)
elif cat1 == "pl. strain":
self.ui.cbx_scat_c2.addItems(res_str)
elif cat1 == "tot. strain":
self.ui.cbx_scat_c2.addItems(res_str)
else:
self.ui.cbx_scat_c2.addItems(" ")
def cat_c3_changed(self):
self.ui.cbx_scat_c3.clear()
cat1 = self.ui.cbx_cat_c3.currentText()
res_pres = ['-']
res_u = ['x', 'y', 'z']
res_str = [
'tot', 's1', 's2', 's3', 'sxx', 'syy', 'szz', 'sxy', 'syz', 'sxz'
]
if cat1 == "pressure":
self.ui.cbx_scat_c3.addItems(res_pres)
elif cat1 == "u":
self.ui.cbx_scat_c3.addItems(res_u)
elif cat1 == "stress":
self.ui.cbx_scat_c3.addItems(res_str)
elif cat1 == "estress":
self.ui.cbx_scat_c3.addItems(res_str)
elif cat1 == "el. strain":
self.ui.cbx_scat_c3.addItems(res_str)
elif cat1 == "pl. strain":
self.ui.cbx_scat_c3.addItems(res_str)
elif cat1 == "tot. strain":
self.ui.cbx_scat_c3.addItems(res_str)
else:
self.ui.cbx_scat_c3.addItems(" ")
def cat_c4_changed(self):
self.ui.cbx_scat_c4.clear()
cat1 = self.ui.cbx_cat_c4.currentText()
res_pres = ['-']
res_u = ['x', 'y', 'z']
res_str = [
'tot', 's1', 's2', 's3', 'sxx', 'syy', 'szz', 'sxy', 'syz', 'sxz'
]
if cat1 == "pressure":
self.ui.cbx_scat_c4.addItems(res_pres)
elif cat1 == "u":
self.ui.cbx_scat_c4.addItems(res_u)
elif cat1 == "stress":
self.ui.cbx_scat_c4.addItems(res_str)
elif cat1 == "estress":
self.ui.cbx_scat_c4.addItems(res_str)
elif cat1 == "el. strain":
self.ui.cbx_scat_c4.addItems(res_str)
elif cat1 == "pl. strain":
self.ui.cbx_scat_c4.addItems(res_str)
elif cat1 == "tot. strain":
self.ui.cbx_scat_c4.addItems(res_str)
else:
self.ui.cbx_scat_c4.addItems(" ")
def model1_input_change(self):
self.ui.cbx_inp_model_m1.clear()
depth1 = self.ui.cbx_inp_depth_m1.currentText()
if depth1 == "Mod1":
self.ui.cbx_inp_model_m1.addItems(mod1key)
elif depth1 == "Mod2":
self.ui.cbx_inp_model_m1.addItems(mod2key)
else:
self.ui.cbx_inp_model_m1.addItems(" ")
def model2_input_change(self):
self.ui.cbx_inp_model_m2.clear()
depth2 = self.ui.cbx_inp_depth_m2.currentText()
if depth2 == "Mod1":
self.ui.cbx_inp_model_m2.addItems(mod1key)
elif depth2 == "Mod2":
self.ui.cbx_inp_model_m2.addItems(mod2key)
else:
self.ui.cbx_inp_model_m2.addItems(" ")
def plot_results(self):
user_cat_c1 = self.ui.cbx_cat_c1.currentText()
user_cat_c2 = self.ui.cbx_cat_c2.currentText()
user_cat_c3 = self.ui.cbx_cat_c3.currentText()
user_cat_c4 = self.ui.cbx_cat_c4.currentText()
user_subcat_c1 = self.ui.cbx_scat_c1.currentText()
user_subcat_c2 = self.ui.cbx_scat_c2.currentText()
user_subcat_c3 = self.ui.cbx_scat_c3.currentText()
user_subcat_c4 = self.ui.cbx_scat_c4.currentText()
user_cshades_c1 = int(self.ui.cshades_c1.value())
user_cshades_c2 = int(self.ui.cshades_c2.value())
user_cshades_c3 = int(self.ui.cshades_c3.value())
user_cshades_c4 = int(self.ui.cshades_c4.value())
user_colormap = str(self.ui.cbx_legend.currentText())
user_resolution = int(self.ui.resolution.value())
key_f1 = user_cat_c1 + '-' + user_subcat_c1
key_f2 = user_cat_c2 + '-' + user_subcat_c2
key_f3 = user_cat_c3 + '-' + user_subcat_c3
key_f4 = user_cat_c4 + '-' + user_subcat_c4
xi = np.linspace(-500, 500, user_resolution)
yi = np.linspace(-500, 500, user_resolution)
user_mod1 = self.ui.cbx_mod1.currentText()
user_mod2 = self.ui.cbx_mod2.currentText()
if self.ui.radb_freesel.isChecked():
user_folderpath_m1 = self.ui.input_folder_m1.text()
user_folderpath_m2 = self.ui.input_folder_m2.text()
model1 = self.ui.input_model1.text()
model2 = self.ui.input_model2.text()
if self.ui.checkbox_folder_m1.isChecked():
model_path_m1 = user_folderpath_m1 + '/' + model1 + '/'
else:
model_path_m1 = 'input_files/' + model1 + '/'
if self.ui.checkbox_folder_m2.isChecked():
model_path_m2 = user_folderpath_m2 + '/' + model2 + '/'
else:
model_path_m2 = 'input_files/' + model2 + '/'
if user_mod1 == model1 and user_mod2 == model2:
model_path1 = model_path_m1
model_path2 = model_path_m2
elif user_mod2 == model1 and user_mod1 == model2:
model_path1 = model_path_m2
model_path2 = model_path_m1
elif user_mod1 == model1 and user_mod2 == model1:
model_path1 = model_path_m1
model_path2 = model_path_m1
elif user_mod1 == model2 and user_mod2 == model2:
model_path1 = model_path_m2
model_path2 = model_path_m2
elif self.ui.radb_predsel.isChecked():
depth_m1 = self.ui.cbx_inp_depth_m1.currentText()
depth_m2 = self.ui.cbx_inp_depth_m2.currentText()
loadstep_m1 = self.ui.cbx_inp_loadstep_m1.currentText()
loadstep_m2 = self.ui.cbx_inp_loadstep_m2.currentText()
model1 = self.ui.cbx_inp_model_m1.currentText()
model2 = self.ui.cbx_inp_model_m2.currentText()
model_path_m1 = predef_paths(depth_m1, model1, loadstep_m1)
model_path_m2 = predef_paths(depth_m2, model2, loadstep_m2)
comp_m1 = model1 + '_' + loadstep_m1
comp_m2 = model2 + '_' + loadstep_m2
if user_mod1 == comp_m1 and user_mod2 == comp_m2:
model_path1 = model_path_m1
model_path2 = model_path_m2
elif user_mod2 == comp_m1 and user_mod1 == comp_m2:
model_path1 = model_path_m2
model_path2 = model_path_m1
elif user_mod1 == comp_m1 and user_mod2 == comp_m1:
model_path1 = model_path_m1
model_path2 = model_path_m1
elif user_mod1 == comp_m2 and user_mod2 == comp_m2:
model_path1 = model_path_m2
model_path2 = model_path_m2
# Calculations
results_mod1 = ans_csvdataimp_complete(model_path1)
results_mod2 = ans_csvdataimp_complete(model_path2)
xval_f1_m1, yval_f1_m1, zval_f1_m1, chead_f1_m1, output_title_f1_m1 = plot_df(
results_mod1, input_output, key_f1)
xval_f2_m1, yval_f2_m1, zval_f2_m1, chead_f2_m1, output_title_f2_m1 = plot_df(
results_mod1, input_output, key_f2)
xval_f3_m1, yval_f3_m1, zval_f3_m1, chead_f3_m1, output_title_f3_m1 = plot_df(
results_mod1, input_output, key_f3)
xval_f4_m1, yval_f4_m1, zval_f4_m1, chead_f4_m1, output_title_f4_m1 = plot_df(
results_mod1, input_output, key_f4)
xval_f1_m2, yval_f1_m2, zval_f1_m2, chead_f1_m2, output_title_f1_m2 = plot_df(
results_mod2, input_output, key_f1)
xval_f2_m2, yval_f2_m2, zval_f2_m2, chead_f2_m2, output_title_f2_m2 = plot_df(
results_mod2, input_output, key_f2)
xval_f3_m2, yval_f3_m2, zval_f3_m2, chead_f3_m2, output_title_f3_m2 = plot_df(
results_mod2, input_output, key_f3)
xval_f4_m2, yval_f4_m2, zval_f4_m2, chead_f4_m2, output_title_f4_m2 = plot_df(
results_mod2, input_output, key_f4)
min_f1, max_f1 = graduation(results_mod1, results_mod2, input_output,
key_f1)
min_f2, max_f2 = graduation(results_mod1, results_mod2, input_output,
key_f2)
min_f3, max_f3 = graduation(results_mod1, results_mod2, input_output,
key_f3)
min_f4, max_f4 = graduation(results_mod1, results_mod2, input_output,
key_f4)
user_graduation_f1 = np.linspace(min_f1,
max_f1,
user_cshades_c1,
endpoint=True)
user_graduation_f2 = np.linspace(min_f2,
max_f2,
user_cshades_c2,
endpoint=True)
user_graduation_f3 = np.linspace(min_f3,
max_f3,
user_cshades_c3,
endpoint=True)
user_graduation_f4 = np.linspace(min_f4,
max_f4,
user_cshades_c4,
endpoint=True)
colm = colormap(user_colormap)
fig = plt.figure(constrained_layout=True, figsize=(18, 9))
spec = gridspec.GridSpec(ncols=4, nrows=2, figure=fig)
# figure 1
f1_ax1 = fig.add_subplot(spec[0, 0])
# Contour plot
zi = griddata((xval_f1_m1, yval_f1_m1),
zval_f1_m1, (xi[None, :], yi[:, None]),
method='linear')
cf_f1_1 = plt.contourf(xi, yi, zi, user_graduation_f1, cmap=colm)
f1_ax1.axes.get_xaxis().set_visible(False) # Achsen unsichtbar machen
plt.ylabel(user_mod1)
plt.title(output_title_f1_m1)
f1_ax2 = fig.add_subplot(spec[1, 0])
# Contour plot
zi = griddata((xval_f1_m2, yval_f1_m2),
zval_f1_m2, (xi[None, :], yi[:, None]),
method='linear')
cf_f1_2 = plt.contourf(xi, yi, zi, user_graduation_f1, cmap=colm)
plt.ylabel(user_mod2)
fig.colorbar(cf_f1_1, location='bottom')
# figure 2
f2_ax1 = fig.add_subplot(spec[0, 1])
zi = griddata((xval_f2_m1, yval_f2_m1),
zval_f2_m1, (xi[None, :], yi[:, None]),
method='linear')
cf_f2_1 = plt.contourf(xi, yi, zi, user_graduation_f2, cmap=colm)
f2_ax1.axes.get_xaxis().set_visible(False)
f2_ax1.axes.get_yaxis().set_visible(False)
plt.title(output_title_f2_m1)
f2_ax2 = fig.add_subplot(spec[1, 1])
# Contour plot
zi = griddata((xval_f2_m2, yval_f2_m2),
zval_f2_m2, (xi[None, :], yi[:, None]),
method='linear')
cf_f2_2 = plt.contourf(xi, yi, zi, user_graduation_f2, cmap=colm)
f2_ax2.axes.get_yaxis().set_visible(False)
fig.colorbar(cf_f2_1, location='bottom')
# figure 3
f3_ax1 = fig.add_subplot(spec[0, 2])
zi = griddata((xval_f3_m1, yval_f3_m1),
zval_f3_m1, (xi[None, :], yi[:, None]),
method='linear')
cf_f3_1 = plt.contourf(xi, yi, zi, user_graduation_f3, cmap=colm)
f3_ax1.axes.get_xaxis().set_visible(False)
f3_ax1.axes.get_yaxis().set_visible(False)
plt.title(output_title_f3_m1)
f3_ax2 = fig.add_subplot(spec[1, 2])
zi = griddata((xval_f3_m2, yval_f3_m2),
zval_f3_m2, (xi[None, :], yi[:, None]),
method='linear')
cf_f3_2 = plt.contourf(xi, yi, zi, user_graduation_f3, cmap=colm)
f3_ax2.axes.get_yaxis().set_visible(False)
fig.colorbar(cf_f3_1, location='bottom')
# figure 4
f4_ax1 = fig.add_subplot(spec[0, 3])
# Contour plot
zi = griddata((xval_f4_m1, yval_f4_m1),
zval_f4_m1, (xi[None, :], yi[:, None]),
method='linear')
cf_f4_1 = plt.contourf(xi, yi, zi, user_graduation_f4, cmap=colm)
f4_ax1.axes.get_xaxis().set_visible(False)
f4_ax1.axes.get_yaxis().set_visible(False)
plt.title(output_title_f4_m1)
f4_ax2 = fig.add_subplot(spec[1, 3])
zi = griddata((xval_f4_m2, yval_f4_m2),
zval_f4_m2, (xi[None, :], yi[:, None]),
method='linear')
cf_f4_2 = plt.contourf(xi, yi, zi, user_graduation_f4, cmap=colm)
f4_ax2.axes.get_yaxis().set_visible(False)
fig.colorbar(cf_f4_1, location='bottom')
plt.show()
def plot_differences(self):
user_cat_c1 = self.ui.cbx_cat_c1.currentText()
user_cat_c2 = self.ui.cbx_cat_c2.currentText()
user_cat_c3 = self.ui.cbx_cat_c3.currentText()
user_cat_c4 = self.ui.cbx_cat_c4.currentText()
user_subcat_c1 = self.ui.cbx_scat_c1.currentText()
user_subcat_c2 = self.ui.cbx_scat_c2.currentText()
user_subcat_c3 = self.ui.cbx_scat_c3.currentText()
user_subcat_c4 = self.ui.cbx_scat_c4.currentText()
user_cshades_c1 = int(self.ui.cshades_c1.value())
user_cshades_c2 = int(self.ui.cshades_c2.value())
user_cshades_c3 = int(self.ui.cshades_c3.value())
user_cshades_c4 = int(self.ui.cshades_c4.value())
user_colormap = str(self.ui.cbx_legend.currentText())
user_resolution = int(self.ui.resolution.value())
key_f1 = user_cat_c1 + '-' + user_subcat_c1
key_f2 = user_cat_c2 + '-' + user_subcat_c2
key_f3 = user_cat_c3 + '-' + user_subcat_c3
key_f4 = user_cat_c4 + '-' + user_subcat_c4
xi = np.linspace(-500, 500, user_resolution)
yi = np.linspace(-500, 500, user_resolution)
user_mod1 = self.ui.cbx_mod1.currentText()
user_mod2 = self.ui.cbx_mod2.currentText()
label_diff = 'Difference: ' + str(user_mod2) + ' - ' + str(user_mod1)
if self.ui.radb_freesel.isChecked():
user_folderpath_m1 = self.ui.input_folder_m1.text()
user_folderpath_m2 = self.ui.input_folder_m2.text()
model1 = self.ui.input_model1.text()
model2 = self.ui.input_model2.text()
if self.ui.checkbox_folder_m1.isChecked():
model_path_m1 = user_folderpath_m1 + '/' + model1 + '/'
else:
model_path_m1 = 'input_files/' + model1 + '/'
if self.ui.checkbox_folder_m2.isChecked():
model_path_m2 = user_folderpath_m2 + '/' + model2 + '/'
else:
model_path_m2 = 'input_files/' + model2 + '/'
if user_mod1 == model1 and user_mod2 == model2:
model_path1 = model_path_m1
model_path2 = model_path_m2
elif user_mod2 == model1 and user_mod1 == model2:
model_path1 = model_path_m2
model_path2 = model_path_m1
elif user_mod1 == model1 and user_mod2 == model1:
model_path1 = model_path_m1
model_path2 = model_path_m1
elif user_mod1 == model2 and user_mod2 == model2:
model_path1 = model_path_m2
model_path2 = model_path_m2
elif self.ui.radb_predsel.isChecked():
depth_m1 = self.ui.cbx_inp_depth_m1.currentText()
depth_m2 = self.ui.cbx_inp_depth_m2.currentText()
loadstep_m1 = self.ui.cbx_inp_loadstep_m1.currentText()
loadstep_m2 = self.ui.cbx_inp_loadstep_m2.currentText()
model1 = self.ui.cbx_inp_model_m1.currentText()
model2 = self.ui.cbx_inp_model_m2.currentText()
model_path_m1 = predef_paths(depth_m1, model1, loadstep_m1)
model_path_m2 = predef_paths(depth_m2, model2, loadstep_m2)
comp_m1 = model1 + '_' + loadstep_m1
comp_m2 = model2 + '_' + loadstep_m2
if user_mod1 == comp_m1 and user_mod2 == comp_m2:
model_path1 = model_path_m1
model_path2 = model_path_m2
elif user_mod2 == comp_m1 and user_mod1 == comp_m2:
model_path1 = model_path_m2
model_path2 = model_path_m1
elif user_mod1 == comp_m1 and user_mod2 == comp_m1:
model_path1 = model_path_m1
model_path2 = model_path_m1
elif user_mod1 == comp_m2 and user_mod2 == comp_m2:
model_path1 = model_path_m2
model_path2 = model_path_m2
# Calculations
results_mod1 = ans_csvdataimp_complete(model_path1)
results_mod2 = ans_csvdataimp_complete(model_path2)
xval_f1_diff1, yval_f1_diff1, zval_f1_diff1, chead_f1_diff1, output_title_f1_diff1, min_diff_f1, max_diff_f1 = plot_diff_df(
results_mod1, results_mod2, input_output, key_f1)
xval_f2_diff1, yval_f2_diff1, zval_f2_diff1, chead_f2_diff1, output_title_f2_diff1, min_diff_f2, max_diff_f2 = plot_diff_df(
results_mod1, results_mod2, input_output, key_f2)
xval_f3_diff1, yval_f3_diff1, zval_f3_diff1, chead_f3_diff1, output_title_f3_diff1, min_diff_f3, max_diff_f3 = plot_diff_df(
results_mod1, results_mod2, input_output, key_f3)
xval_f4_diff1, yval_f4_diff1, zval_f4_diff1, chead_f4_diff1, output_title_f4_diff1, min_diff_f4, max_diff_f4 = plot_diff_df(
results_mod1, results_mod2, input_output, key_f4)
user_graduation_diff_f1 = np.linspace(min_diff_f1,
max_diff_f1,
user_cshades_c1,
endpoint=True)
user_graduation_diff_f2 = np.linspace(min_diff_f2,
max_diff_f2,
user_cshades_c2,
endpoint=True)
user_graduation_diff_f3 = np.linspace(min_diff_f3,
max_diff_f3,
user_cshades_c3,
endpoint=True)
user_graduation_diff_f4 = np.linspace(min_diff_f4,
max_diff_f4,
user_cshades_c4,
endpoint=True)
colm = colormap(user_colormap)
fig_diff = plt.figure(constrained_layout=True, figsize=(18, 4.5))
spec_diff = gridspec.GridSpec(ncols=4, nrows=1, figure=fig_diff)
fig_diff.suptitle(label_diff, fontsize=10)
# figure 1
f1_diff_ax1 = fig_diff.add_subplot(spec_diff[0, 0])
# Contour plot
zi = griddata((xval_f1_diff1, yval_f1_diff1),
zval_f1_diff1, (xi[None, :], yi[:, None]),
method='linear')
cf_f1_1 = plt.contourf(xi, yi, zi, user_graduation_diff_f1, cmap=colm)
plt.ylabel('differences')
plt.title(output_title_f1_diff1)
fig_diff.colorbar(cf_f1_1, location='bottom')
# figure 2
f2_diff_ax1 = fig_diff.add_subplot(spec_diff[0, 1])
zi = griddata((xval_f2_diff1, yval_f2_diff1),
zval_f2_diff1, (xi[None, :], yi[:, None]),
method='linear')
cf_f2_1 = plt.contourf(xi, yi, zi, user_graduation_diff_f2, cmap=colm)
f2_diff_ax1.axes.get_yaxis().set_visible(False)
plt.title(output_title_f2_diff1)
fig_diff.colorbar(cf_f2_1, location='bottom')
# figure 3
f3_diff_ax1 = fig_diff.add_subplot(spec_diff[0, 2])
zi = griddata((xval_f3_diff1, yval_f3_diff1),
zval_f3_diff1, (xi[None, :], yi[:, None]),
method='linear')
cf_f3_1 = plt.contourf(xi, yi, zi, user_graduation_diff_f3, cmap=colm)
f3_diff_ax1.axes.get_yaxis().set_visible(False)
plt.title(output_title_f3_diff1)
fig_diff.colorbar(cf_f3_1, location='bottom')
# figure 4
f4_diff_ax1 = fig_diff.add_subplot(spec_diff[0, 3])
# Contour plot
zi = griddata((xval_f4_diff1, yval_f4_diff1),
zval_f4_diff1, (xi[None, :], yi[:, None]),
method='linear')
cf_f4_1 = plt.contourf(xi, yi, zi, user_graduation_diff_f4, cmap=colm)
f4_diff_ax1.axes.get_yaxis().set_visible(False)
plt.title(output_title_f4_diff1)
fig_diff.colorbar(cf_f4_1, location='bottom')
plt.show()
class MainWindow(QMainWindow):
def __init__(self):
super(MainWindow, self).__init__()
# Set up the user interface from Designer.
self.ui = Ui_MainWindow()
self.ui.setupUi(self)
self.setWindowTitle("Kepler Manager")
self.viewer = Viewer()
self.viewer3d = Viewer3D()
self.tableViewer = TableViewer()
self.caldialog = CalDialog()
self.errdialog = ErrDialog()
self.cal_stop = False
regexp = QRegExp("[0-9e\.\+\-\*\(\)/]*")
validator = QRegExpValidator(regexp)
self.ui.lineEdit_G.setValidator(validator)
self.ui.lineEdit_TimeIncrement.setValidator(validator)
self.ui.lineEdit_StopTime.setValidator(validator)
#self.ui.actionAbout_Kepler.triggered.connect(self.about_Kepler)
#self.ui.actionPreference.triggered.connect(self.preference)
self.ui.actionSave.triggered.connect(self.save_file)
self.ui.actionLoad_your_settings.triggered.connect(self.load_file)
self.ui.actionLoad_SOL.triggered.connect(self.load_SOL)
self.ui.actionViewer.triggered.connect(self.open_viewer)
#self.ui.actionTable_Viewer.triggered.connect(self.open_tableviewer)
#self.ui.actionHow_to_use.triggered.connect(self.show_help)
#self.ui.actionHow_does_this_work.triggered.connect(self.show_mechanism)
#self.ui.comboBox_Choose2Dor3D.currentIndexChanged.connect(self.choose2dor3d)
self.ui.pushButton_AddPlanet.clicked.connect(self.add_planet)
self.ui.pushButton_DeletePlanet.clicked.connect(self.remove_planets)
self.ui.lineEdit_G.setText("6.674e-11")
self.ui.pushButton_Calc.clicked.connect(self.calc)
self.planets_attribute = TreeViewModel()
self.planets = Planet_system()
self.resultcontainer = ResultContainer()
self.ui.treeView_PlanetAttribute.setModel(self.planets_attribute)
self.ui.treeView_PlanetAttribute.setItemDelegate(Delegate())
def add_planet(self):
self.planets_attribute.addRow("","0","0","0","0","0","0","0")
def add_planet_from_f(self, name, mass, x0, y0, z0, vx0, vy0, vz0):
self.planets_attribute.addRow(name, mass, x0, y0, z0, vx0, vy0, vz0)
def selected_rows(self):
rows = []
for index in self.ui.treeView_PlanetAttribute.selectedIndexes():
if index.column() == 0:
rows.append(index.row())
return rows
def remove_planets(self):
self.planets_attribute.removeRows(self.selected_rows())
def calc(self):
if self.ui.lineEdit_G.text() == ""\
or self.ui.lineEdit_TimeIncrement.text() == ""\
or self.ui.lineEdit_StopTime.text() == "":
pass
elif self.planets_attribute.chk_duplicate():
self.errdialog.setWindowTitle("Error Message")
self.errdialog.ui.label_ErrMSG.setText("Initial position is a duplicate")
self.errdialog.show()
self.errdialog.ui.pushButton_ErrOK.clicked.connect(self.errdialog.close)
pass
elif self.planets_attribute.chk_filled():
pass
else:
for i in range(len(self.planets)):
self.planets.del_planet(-1)
dt = float(eval(self.ui.lineEdit_TimeIncrement.text()))
end = float(eval(self.ui.lineEdit_StopTime.text()))
sum_step = int(end // dt + 1)
G = float(eval(self.ui.lineEdit_G.text()))
if len(self.planets_attribute.items) >= 2:
self.caldialog.ui.progressBar_Cal.setRange(0, sum_step)
self.caldialog.ui.pushButton_CalStop.clicked.connect(self.cal_rupt)
self.caldialog.show()
if self.ui.comboBox_Choose2Dor3D.currentText() == "2D":
for i in range(len(self.planets_attribute.items)):
name, mass, x0, y0, z0, vx0, vy0, vz0 = self.planets_attribute.values(i)
self.planets.add_planet(name, mass, x0, y0, z0, vx0, vy0, vz0)
for i in range(sum_step):
if self.cal_stop:
for k in range(len(self.planets)):
del self.planets[k]
self.caldialog.close()
self.cal_stop = False
break
self.caldialog.ui.progressBar_Cal.setValue(i)
RK4(self.planets, dt, i, G)
#print(i)
self.resultcontainer.load_from_ps(dt, end, True, self.planets)
self.caldialog.close()
self.open_viewer()
self.viewer.set_result(self.resultcontainer.results)
else:
for i in range(len(self.planets_attribute.items)):
name, mass, x0, y0, z0, vz0, vy0, vz0 = self.planets_attribute.values(i)
self.planets.add_planet(name, mass, x0, y0, z0, vz0, vy0, vz0)
for i in range(sum_step):
if self.cal_stop:
for k in range(len(self.planets)):
del self.planets[k]
self.caldialog.close()
self.cal_stop = False
break
self.caldialog.ui.progressBar_Cal.setValue(i)
RK4z(self.planets, dt, i, G)
self.resultcontainer.load_from_ps(dt, end, False, self.planets)
self.caldialog.close()
self.open_viewer()
self.viewer.set_result(self.resultcontainer.results)
else:
pass
def load_file(self):
filedialog = QFileDialog()
filedialog.setDirectory("./settings")
filepath = filedialog.getOpenFileName(filter="Kepler Planet Settings (*.kps)")
if filepath == "":
pass
else:
with open(filepath, "r") as f:
file = json.load(f)
self.planets_attribute.items = []
for i in range(len(file)):
self.add_planet_from_f(file[i][0],\
file[i][1],\
file[i][2],\
file[i][3],\
file[i][4],\
file[i][5],\
file[i][6],\
file[i][7])
def load_SOL(self):
with open("./settings/SOL.kps", "r") as f:
file = json.load(f)
self.planets_attribute.items = []
for i in range(len(file)):
self.add_planet_from_f(file[i][0],\
file[i][1],\
file[i][2],\
file[i][3],\
file[i][4],\
file[i][5],\
file[i][6],\
file[i][7])
def save_file(self):
filedialog = QFileDialog()
filedialog.setDirectory("./settings")
filepath = filedialog.getSaveFileName(filter="Kepler Planet Settings (*.kps)")
if filepath == "":
pass
else:
with open(filepath, "w") as f:
json.dump(self.planets_attribute.items, f, sort_keys=True, indent=4)
def cal_rupt(self):
self.cal_stop = True
def open_viewer(self):
self.viewer.show()
def open_viewer3d(self):
self.viewer3d.show()
