def contact_layout_panel(panel, pre, exithooks):
container_panel = wx.Panel(panel)
container_panel.Sizer = VSizer()
container_panel.ez_panel = None
container_panel.adv_panel = None
prefix = 'buddylist.layout.'
service = get_pref(prefix + 'service_icon_pos')
se_enabled = get_pref(prefix + 'show_service_icon')
status = get_pref(prefix + 'status_icon_pos')
st_enabled = get_pref(prefix + 'show_status_icon')
icon = get_pref(prefix + 'buddy_icon_pos')
icon_enabled = get_pref(prefix + 'show_buddy_icon')
#heal some conflicting states
if not icon_enabled:
if status.startswith('b'): status = icon
if service.startswith('b'): service = icon
#service will be shown farther left if they're the same, so fix status first
#technically, these next two would be ok as long as they're both enabled,
#but let's get them to a consistent state ASAP
if status.startswith('f') and service != status[1:]: status = status[1:]
if service.startswith('f') and status != service[1:]: service = service[1:]
#other states may be conflicting, but do not cause problems, only those where
#the BUMP/VACUUM rules come into play need to be fixed
container_panel.layout_model = LayoutModel(
service=service,
se_enabled=se_enabled,
status=status,
st_enabled=st_enabled,
icon=icon,
icon_enabled=icon_enabled,
)
Cells = trellis.Cells
#hook up helper models
cells = Cells(container_panel.layout_model)
#Trellis will keep the rest alive
container_panel.links = dict(
service_icon_pos=PrefLink(prefname=prefix + 'service_icon_pos',
value=cells['service']),
show_service_icon=PrefLink(prefname=prefix + 'show_service_icon',
value=cells['se_enabled']),
status_icon_pos=PrefLink(prefname=prefix + 'status_icon_pos',
value=cells['status']),
show_status_icon=PrefLink(prefname=prefix + 'show_status_icon',
value=cells['st_enabled']),
buddy_icon_pos=PrefLink(prefname=prefix + 'buddy_icon_pos',
value=cells['icon']),
show_buddy_icon=PrefLink(prefname=prefix + 'show_buddy_icon',
value=cells['icon_enabled']),
)
if pref('buddylist.layout.ez_layout', True):
easy_layout_panel(container_panel, pre)
else:
advanced_layout_panel(container_panel, pre, exithooks)
return container_panel
def contact_layout_panel(panel,pre,exithooks):
container_panel = wx.Panel(panel)
container_panel.Sizer = VSizer()
container_panel.ez_panel = None
container_panel.adv_panel = None
prefix = 'buddylist.layout.'
service = get_pref(prefix+'service_icon_pos')
se_enabled = get_pref(prefix+'show_service_icon')
status = get_pref(prefix+'status_icon_pos')
st_enabled = get_pref(prefix+'show_status_icon')
icon = get_pref(prefix+'buddy_icon_pos')
icon_enabled = get_pref(prefix+'show_buddy_icon')
#heal some conflicting states
if not icon_enabled:
if status.startswith('b'): status = icon
if service.startswith('b'): service = icon
#service will be shown farther left if they're the same, so fix status first
#technically, these next two would be ok as long as they're both enabled,
#but let's get them to a consistent state ASAP
if status.startswith('f') and service != status[1:]: status = status[1:]
if service.startswith('f') and status != service[1:]: service = service[1:]
#other states may be conflicting, but do not cause problems, only those where
#the BUMP/VACUUM rules come into play need to be fixed
container_panel.layout_model = LayoutModel(
service = service,
se_enabled = se_enabled,
status = status,
st_enabled = st_enabled,
icon = icon,
icon_enabled = icon_enabled,
)
Cells = trellis.Cells
#hook up helper models
cells = Cells(container_panel.layout_model)
#Trellis will keep the rest alive
container_panel.links = dict(
service_icon_pos = PrefLink(prefname=prefix+'service_icon_pos', value = cells['service']),
show_service_icon = PrefLink(prefname=prefix+'show_service_icon', value = cells['se_enabled']),
status_icon_pos = PrefLink(prefname=prefix+'status_icon_pos', value = cells['status']),
show_status_icon = PrefLink(prefname=prefix+'show_status_icon', value = cells['st_enabled']),
buddy_icon_pos = PrefLink(prefname=prefix+'buddy_icon_pos', value = cells['icon']),
show_buddy_icon = PrefLink(prefname=prefix+'show_buddy_icon', value = cells['icon_enabled']),
)
if pref('buddylist.layout.ez_layout', True):
easy_layout_panel(container_panel,pre)
else:
advanced_layout_panel(container_panel,pre,exithooks)
return container_panel
def __init__(self, parent):
wx.Panel.__init__(self, parent)
self.links = parent.links
self.Sizer = wx.BoxSizer(wx.VERTICAL)
self.grid = wx.FlexGridSizer(2, 3)
self.grid.AddGrowableRow(1, 1)
self.Sizer.Add(self.grid, 0,
wx.ALIGN_CENTER_VERTICAL | wx.ALIGN_CENTER_HORIZONTAL)
from gui import skin
g = skin.get
icons = g('AppDefaults.ez.icons')
items = self.items = [
LayoutItem(
self, icons.one,
dict(show_extra=True,
extra_info='both',
show_buddy_icon=True,
buddy_icon_pos='left',
buddy_icon_size=32,
show_status_icon=True,
status_icon_pos='bleft',
show_service_icon=True,
service_icon_pos='bright')),
LayoutItem(
self, icons.two,
dict(show_extra=True,
extra_info='both',
show_buddy_icon=True,
buddy_icon_pos='right',
buddy_icon_size=32,
show_status_icon=True,
status_icon_pos='bleft',
show_service_icon=True,
service_icon_pos='bright')),
LayoutItem(
self, icons.three,
dict(show_extra=True,
extra_info='both',
show_buddy_icon=True,
buddy_icon_pos='right',
buddy_icon_size=32,
show_status_icon=True,
status_icon_pos='left',
show_service_icon=True,
service_icon_pos='bright')),
LayoutItem(
self, icons.four,
dict(show_extra=True,
extra_info='idle',
show_buddy_icon=False,
show_status_icon=True,
status_icon_pos='right',
show_service_icon=True,
service_icon_pos='left')),
LayoutItem(
self, icons.five,
dict(show_extra=True,
extra_info='idle',
show_buddy_icon=False,
show_status_icon=True,
status_icon_pos='left',
show_service_icon=True,
service_icon_pos='right')),
LayoutItem(
self, icons.six,
dict(
show_extra=True,
extra_info='idle',
show_buddy_icon=False,
show_status_icon=True,
status_icon_pos='left',
show_service_icon=False,
))
]
self.grid.AddMany([(item, 0) for item in items])
self.selection = None
for item in items:
for key in item.prefdict:
if item.prefdict[key] != get_pref('buddylist.layout.%s' % key):
break
else:
self.SetSelection(item)
break
def checkbox_enabled_when_pref(cb, prefname):
cb.Enabled = get_pref(prefname)
profile.prefs.link(prefname,
lambda val: wx.CallAfter(cb.Enable, val),
obj=cb)
def __init__(self, parent):
wx.Panel.__init__(self, parent)
self.links = parent.links
self.Sizer = wx.BoxSizer(wx.VERTICAL)
self.grid = wx.FlexGridSizer(2, 3)
self.grid.AddGrowableRow(1, 1)
self.Sizer.Add(self.grid, 0, wx.ALIGN_CENTER_VERTICAL | wx.ALIGN_CENTER_HORIZONTAL)
from gui import skin
g = skin.get
icons = g("AppDefaults.ez.icons")
items = self.items = [
LayoutItem(
self,
icons.one,
dict(
show_extra=True,
extra_info="both",
show_buddy_icon=True,
buddy_icon_pos="left",
buddy_icon_size=32,
show_status_icon=True,
status_icon_pos="bleft",
show_service_icon=True,
service_icon_pos="bright",
),
),
LayoutItem(
self,
icons.two,
dict(
show_extra=True,
extra_info="both",
show_buddy_icon=True,
buddy_icon_pos="right",
buddy_icon_size=32,
show_status_icon=True,
status_icon_pos="bleft",
show_service_icon=True,
service_icon_pos="bright",
),
),
LayoutItem(
self,
icons.three,
dict(
show_extra=True,
extra_info="both",
show_buddy_icon=True,
buddy_icon_pos="right",
buddy_icon_size=32,
show_status_icon=True,
status_icon_pos="left",
show_service_icon=True,
service_icon_pos="bright",
),
),
LayoutItem(
self,
icons.four,
dict(
show_extra=True,
extra_info="idle",
show_buddy_icon=False,
show_status_icon=True,
status_icon_pos="right",
show_service_icon=True,
service_icon_pos="left",
),
),
LayoutItem(
self,
icons.five,
dict(
show_extra=True,
extra_info="idle",
show_buddy_icon=False,
show_status_icon=True,
status_icon_pos="left",
show_service_icon=True,
service_icon_pos="right",
),
),
LayoutItem(
self,
icons.six,
dict(
show_extra=True,
extra_info="idle",
show_buddy_icon=False,
show_status_icon=True,
status_icon_pos="left",
show_service_icon=False,
),
),
]
self.grid.AddMany([(item, 0) for item in items])
self.selection = None
for item in items:
for key in item.prefdict:
if item.prefdict[key] != get_pref("buddylist.layout.%s" % key):
break
else:
self.SetSelection(item)
break
def panel(panel, sizer, addgroup, exithooks):
try:
import researchdriver.driver
except ImportError:
default_cpu_num = 75
default_bandwidth_num = 90
else:
default_cpu_num = int(researchdriver.driver.get_cpu_percent())
default_bandwidth_num = int(researchdriver.driver.get_bandwidth_percent())
description = PrefPanel(
panel,
build_description_webview,
_('Research Module'),
prefix = '',
)
options = PrefPanel(panel,
PrefCollection(
PrefCollection(
PC.Check('local.research.enabled',
_('Allow Digsby to use CPU time to conduct research after %2(research.idle_time_min)d minutes of idle time')),
layout = PC.VSizer(),
itemoptions = (0, wx.ALL, 3),
),
PrefCollection(
lambda parent, prefix: PC.Slider(PC.pname(prefix, 'local.research.cpu_percent'),
_('Maximum CPU Usage:'),
start = 1, stop = 101, step = 1,
value = int(PC.get_pref('local.research.cpu_percent', default=default_cpu_num)),
default = int(PC.get_pref('local.research.cpu_percent', default=default_cpu_num)),
fireonslide = True,
unit = _('{val}%'))(parent)[0], # Slider returns the sizer and the control, we just want the sizer
lambda parent, prefix: PC.Slider(PC.pname(prefix, 'local.research.bandwidth_percent'),
_('Maximum Bandwidth Usage:'),
start = 1, stop = 101, step = 1,
value = int(PC.get_pref('local.research.bandwidth_percent', default=default_bandwidth_num)),
default = int(PC.get_pref('local.research.bandwidth_percent', default=default_bandwidth_num)),
fireonslide = True,
unit = _('{val}%'))(parent)[0], # Slider returns the sizer and the control, we just want the sizer
layout = PC.HSizer(),
itemoptions = (0, wx.ALL, 3),
),
layout = PC.VSizer(),
itemoptions = (0, wx.BOTTOM | wx.TOP, 3)),
_('Options'),
prefix = '',
)
sizer.Add(description, 0, wx.EXPAND | wx.TOP | wx.BOTTOM, 3)
sizer.Add(options, 0, wx.EXPAND | wx.TOP | wx.BOTTOM, 3)
return panel
def panel(panel, sizer, addgroup, exithooks):
try:
import researchdriver.driver
except ImportError:
default_cpu_num = 75
default_bandwidth_num = 90
else:
default_cpu_num = int(researchdriver.driver.get_cpu_percent())
default_bandwidth_num = int(
researchdriver.driver.get_bandwidth_percent())
description = PrefPanel(
panel,
build_description_webview,
_('Research Module'),
prefix='',
)
options = PrefPanel(
panel,
PrefCollection(
PrefCollection(
PC.Check(
'local.research.enabled',
_('Allow Digsby to use CPU time to conduct research after %2(research.idle_time_min)d minutes of idle time'
)),
layout=PC.VSizer(),
itemoptions=(0, wx.ALL, 3),
),
PrefCollection(
lambda parent, prefix: PC.Slider(
PC.pname(prefix, 'local.research.cpu_percent'),
_('Maximum CPU Usage:'),
start=1,
stop=101,
step=1,
value=int(
PC.get_pref('local.research.cpu_percent',
default=default_cpu_num)),
default=int(
PC.get_pref('local.research.cpu_percent',
default=default_cpu_num)),
fireonslide=True,
unit=_('{val}%'))
(parent)[
0
], # Slider returns the sizer and the control, we just want the sizer
lambda parent, prefix: PC.Slider(
PC.pname(prefix, 'local.research.bandwidth_percent'),
_('Maximum Bandwidth Usage:'),
start=1,
stop=101,
step=1,
value=int(
PC.get_pref('local.research.bandwidth_percent',
default=default_bandwidth_num)),
default=int(
PC.get_pref('local.research.bandwidth_percent',
default=default_bandwidth_num)),
fireonslide=True,
unit=_('{val}%'))
(parent)[
0
], # Slider returns the sizer and the control, we just want the sizer
layout=PC.HSizer(),
itemoptions=(0, wx.ALL, 3),
),
layout=PC.VSizer(),
itemoptions=(0, wx.BOTTOM | wx.TOP, 3)),
_('Options'),
prefix='',
)
sizer.Add(description, 0, wx.EXPAND | wx.TOP | wx.BOTTOM, 3)
sizer.Add(options, 0, wx.EXPAND | wx.TOP | wx.BOTTOM, 3)
return panel
def advanced_layout_panel(container_panel, pre, exithooks):
cp_sizer = container_panel.Sizer
adv_panel = container_panel.adv_panel = wx.Panel(container_panel)
adv_panel.Sizer = VSizer()
v = VSizer()
#========================================================================================
#HAX: This should be done differently
#========================================================================================
cb = wx.CheckBox(adv_panel, -1, '')
adv_panel.Sizer.Add(v, 0, wx.ALIGN_CENTER_HORIZONTAL | RIGHT,
cb.Size.width * 1.5)
cb.Destroy()
#========================================================================================
old_spacing, PrefGroup.SPACING = PrefGroup.SPACING, 0
#===============================================================================================================
s = adv_panel.Sizer
prefix = 'buddylist.layout.'
Cells = trellis.Cells
cells = Cells(container_panel.layout_model)
se_selection = Selection(value=cells['service'],
choices=cells['service_choices'],
enabled=cells['se_enabled'])
st_selection = Selection(value=cells['status'],
choices=cells['status_choices'],
enabled=cells['st_enabled'])
bi_selection = Selection(value=cells['icon'],
choices=['left', 'right'],
enabled=cells['icon_enabled'])
#adapt for GUI models
translated = dict(fleft=_('Far Left'),
left=_('Left'),
bleft=_('Badge (Lower Left)'),
bright=_('Badge (Lower Right)'),
right=_('Right'),
fright=_('Far Right'))
se_choices = TranslatableChoices(keys=cells['service_choices'],
translations=translated)
st_choices = TranslatableChoices(keys=cells['status_choices'],
translations=translated)
bi_choices = TranslatableChoices(keys=['left', 'right'],
translations=translated)
#share a bunch of cells
service_model = ChoiceModel(values=Cells(se_choices)['values'],
selection=Cells(se_selection)['selection'],
enabled=cells['se_enabled'])
service_enabled = CheckModel(checked=Cells(service_model)['enabled'])
status_model = ChoiceModel(values=Cells(st_choices)['values'],
selection=Cells(st_selection)['selection'],
enabled=cells['st_enabled'])
status_enabled = CheckModel(checked=status_model.__cells__['enabled'])
icon_model = ChoiceModel(values=Cells(bi_choices)['values'],
selection=Cells(bi_selection)['selection'],
enabled=cells['icon_enabled'])
icon_enabled = CheckModel(checked=Cells(icon_model)['enabled'])
service_check = SyncingCheck(service_enabled,
adv_panel,
label=_('Show service icon on:'))
service_choice = SyncingChoice(service_model, adv_panel)
status_check = SyncingCheck(status_enabled,
adv_panel,
label=_('Show status icon on:'))
status_choice = SyncingChoice(status_model, adv_panel)
icon_check = SyncingCheck(icon_enabled,
adv_panel,
label=_('Show buddy icon on the:'))
icon_choice = SyncingChoice(icon_model, adv_panel)
need_del = [
locals()[cat + '_' + typ] for cat in ['service', 'status', 'icon']
for typ in ['check', 'choice']
]
exithooks.append(lambda: release_syncs(need_del))
# Slider returns sizer, control
bicon_slide, s = Slider('buddy_icon_size',
_('Buddy icon size:'),
start=12,
stop=65,
step=4,
value=get_pref('buddylist.layout.buddy_icon_size'),
fireonslide=True)(adv_panel, pre)
buddypadding_slider, s2 = Slider(
'padding',
_('Buddy padding:'),
start=0,
stop=12,
step=1,
value=get_pref('buddylist.layout.padding'),
fireonslide=True)(adv_panel, pre)
v.Add(
FontFaceAndSize('name_font', _('Contact name:'))(adv_panel, pre), 0,
EXPAND)
extra_info = EnabledGroup(
('', pre), Check('buddylist.layout.show_extra',
_('&Show extra info:')),
Choice('buddylist.layout.extra_info',
(('status', _('Status')), ('idle', _('Idle Time')),
('both', _('Idle Time + Status')))),
FontFaceAndSize('extra_font'))(adv_panel)
bsizer = VSizer()
sssizer = VSizer()
bsizer.AddMany([(extra_info, 0, EXPAND),
(OffsetGroup(('', pre), icon_check, icon_choice,
bicon_slide)(adv_panel), 0, EXPAND)])
sssizer.AddMany([
(OffsetGroup(('', pre), status_check,
status_choice)(adv_panel), 0, EXPAND),
(OffsetGroup(('', pre), service_check,
service_choice)(adv_panel), 0, EXPAND | TOP, 7),
(buddypadding_slider, 0, EXPAND | TOP, 22),
])
h = HSizer()
h.AddMany([(bsizer, 1), (sssizer, 0, LEFT, 48)])
v.Add(h, 1, EXPAND)
# cb(None)
PrefGroup.SPACING = old_spacing
cp_sizer.Add(adv_panel, 0, EXPAND)
def checkbox_enabled_when_pref(cb, prefname):
cb.Enabled = get_pref(prefname)
profile.prefs.link(prefname, lambda val: wx.CallAfter(cb.Enable, val), obj = cb)
def advanced_layout_panel(container_panel, pre, exithooks):
cp_sizer = container_panel.Sizer
adv_panel = container_panel.adv_panel = wx.Panel(container_panel)
adv_panel.Sizer = VSizer()
v = VSizer()
#========================================================================================
#HAX: This should be done differently
#========================================================================================
cb = wx.CheckBox(adv_panel, -1, '')
adv_panel.Sizer.Add(v, 0, wx.ALIGN_CENTER_HORIZONTAL | RIGHT, cb.Size.width * 1.5)
cb.Destroy()
#========================================================================================
old_spacing, PrefGroup.SPACING = PrefGroup.SPACING, 0
#===============================================================================================================
s = adv_panel.Sizer
prefix = 'buddylist.layout.'
Cells = trellis.Cells
cells = Cells(container_panel.layout_model)
se_selection = Selection(value = cells['service'],
choices = cells['service_choices'],
enabled = cells['se_enabled'])
st_selection = Selection(value = cells['status'],
choices = cells['status_choices'],
enabled = cells['st_enabled'])
bi_selection = Selection(value = cells['icon'],
choices = ['left','right'],
enabled = cells['icon_enabled'])
#adapt for GUI models
translated = dict(fleft = _('Far Left'),
left = _('Left'),
bleft = _('Badge (Lower Left)'),
bright = _('Badge (Lower Right)'),
right = _('Right'),
fright = _('Far Right'))
se_choices = TranslatableChoices(keys=cells['service_choices'], translations = translated)
st_choices = TranslatableChoices(keys=cells['status_choices'], translations = translated)
bi_choices = TranslatableChoices(keys=['left','right'], translations = translated)
#share a bunch of cells
service_model = ChoiceModel(values = Cells(se_choices)['values'],
selection = Cells(se_selection)['selection'],
enabled = cells['se_enabled'])
service_enabled = CheckModel( checked = Cells(service_model)['enabled'])
status_model = ChoiceModel(values = Cells(st_choices)['values'],
selection = Cells(st_selection)['selection'],
enabled = cells['st_enabled'])
status_enabled = CheckModel( checked = status_model.__cells__['enabled'])
icon_model = ChoiceModel(values = Cells(bi_choices)['values'],
selection = Cells(bi_selection)['selection'],
enabled = cells['icon_enabled'])
icon_enabled = CheckModel( checked = Cells(icon_model)['enabled'])
service_check = SyncingCheck(service_enabled, adv_panel, label = _('Show service icon on:'))
service_choice = SyncingChoice(service_model, adv_panel)
status_check = SyncingCheck(status_enabled, adv_panel, label = _('Show status icon on:'))
status_choice = SyncingChoice(status_model, adv_panel)
icon_check = SyncingCheck(icon_enabled, adv_panel, label = _('Show buddy icon on the:'))
icon_choice = SyncingChoice(icon_model, adv_panel)
need_del = [locals()[cat + '_' + typ] for cat in ['service', 'status', 'icon']
for typ in ['check', 'choice']]
exithooks.append(lambda:release_syncs(need_del))
# Slider returns sizer, control
bicon_slide, s = Slider('buddy_icon_size',
_('Buddy icon size:'),
start = 12, stop = 65, step = 4,
value = get_pref('buddylist.layout.buddy_icon_size'),
fireonslide = True)(adv_panel,pre)
buddypadding_slider, s2 = Slider('padding',
_('Buddy padding:'),
start = 0, stop = 12, step = 1,
value = get_pref('buddylist.layout.padding'),
fireonslide = True)(adv_panel, pre)
v.Add(FontFaceAndSize('name_font', _('Contact name:'))(adv_panel, pre), 0, EXPAND)
extra_info = EnabledGroup(('', pre),
Check('buddylist.layout.show_extra', _('&Show extra info:')),
Choice('buddylist.layout.extra_info',
(('status', _('Status')),
('idle', _('Idle Time')),
('both', _('Idle Time + Status')))),
FontFaceAndSize('extra_font'))(adv_panel)
bsizer = VSizer()
sssizer = VSizer()
bsizer.AddMany([(extra_info, 0, EXPAND),
(OffsetGroup(('', pre), icon_check, icon_choice, bicon_slide )(adv_panel), 0, EXPAND)])
sssizer.AddMany([
(OffsetGroup(('', pre), status_check, status_choice)(adv_panel), 0, EXPAND),
(OffsetGroup(('', pre), service_check, service_choice)(adv_panel), 0, EXPAND | TOP, 7),
(buddypadding_slider, 0, EXPAND | TOP, 22),
])
h = HSizer()
h.AddMany([(bsizer, 1),
(sssizer, 0, LEFT, 48)])
v.Add(h, 1, EXPAND)
# cb(None)
PrefGroup.SPACING = old_spacing
cp_sizer.Add(adv_panel, 0, EXPAND)
def panel(panel, sizer, addgroup, exithooks):
from gui.pref.pg_contact_list import SyncingCheck, SyncingChoice
p = wx.Panel(panel)
sz = p.Sizer = VSizer()
s = wx.FlexGridSizer(6, 1, 7,7)
prefix = 'buddylist.layout.'
Cells = trellis.Cells
layout_model = LayoutModel(
service = get_pref(prefix+'service_icon_pos'),
se_enabled = get_pref(prefix+'show_service_icon'),
status = get_pref(prefix+'status_icon_pos'),
st_enabled = get_pref(prefix+'show_status_icon'),
icon = get_pref(prefix+'buddy_icon_pos'),
icon_enabled = get_pref(prefix+'show_buddy_icon'),
)
#hook up helper models
cells = Cells(layout_model)
service_icon_pos = PrefLink(prefname=prefix+'service_icon_pos', value = cells['service'])
show_service_icon = PrefLink(prefname=prefix+'show_service_icon', value = cells['se_enabled'])
status_icon_pos = PrefLink(prefname=prefix+'status_icon_pos', value = cells['status'])
show_status_icon = PrefLink(prefname=prefix+'show_status_icon', value = cells['st_enabled'])
buddy_icon_pos = PrefLink(prefname=prefix+'buddy_icon_pos', value = cells['icon'])
show_buddy_icon = PrefLink(prefname=prefix+'show_buddy_icon', value = cells['icon_enabled'])
se_selection = Selection(value = cells['service'],
choices = cells['service_choices'],
enabled = cells['se_enabled'])
st_selection = Selection(value = cells['status'],
choices = cells['status_choices'],
enabled = cells['st_enabled'])
bi_selection = Selection(value = cells['icon'],
choices = ['left','right'],
enabled = cells['icon_enabled'])
#adapt for GUI models
translated = dict(fleft = _('Far Left'),
left = _('Left'),
bleft = _('Badge (Lower Left)'),
bright = _('Badge (Lower Right)'),
right = _('Right'),
fright = _('Far Right'))
se_choices = TranslatableChoices(keys=cells['service_choices'], translations = translated)
st_choices = TranslatableChoices(keys=cells['status_choices'], translations = translated)
bi_choices = TranslatableChoices(keys=['left','right'], translations = translated)
#share a bunch of cells
service_model = ChoiceModel(values = Cells(se_choices)['values'],
selection = Cells(se_selection)['selection'],
enabled = cells['se_enabled'])
service_enabled = CheckModel( checked = Cells(service_model)['enabled'])
status_model = ChoiceModel(values = Cells(st_choices)['values'],
selection = Cells(st_selection)['selection'],
enabled = cells['st_enabled'])
status_enabled = CheckModel( checked = status_model.__cells__['enabled'])
icon_model = ChoiceModel(values = Cells(bi_choices)['values'],
selection = Cells(bi_selection)['selection'],
enabled = cells['icon_enabled'])
icon_enabled = CheckModel( checked = Cells(icon_model)['enabled'])
#Trellis will keep the rest alive
s.links = [layout_model, service_icon_pos, show_service_icon, status_icon_pos, show_status_icon, buddy_icon_pos, show_buddy_icon]
service_check = SyncingCheck(service_enabled, p)
service_choice = SyncingChoice(service_model, p)
status_check = SyncingCheck(status_enabled, p)
status_choice = SyncingChoice(status_model, p)
icon_check = SyncingCheck(icon_enabled, p)
icon_choice = SyncingChoice(icon_model, p)
s.Add(service_check)
s.Add(service_choice)
s.Add(status_check)
s.Add(status_choice)
s.Add(icon_check)
s.Add(icon_choice)
s.AddGrowableCol(1,1)
sz.Add(s, 0, EXPAND)
sizer.Add(p)
return panel
def output_pref(self):
if self.go:
from gui.pref.prefcontrols import mark_pref
if get_pref(self.prefname) != self.value:
mark_pref(self.prefname, self.value)