def show_scan_pt_list(self):
""" Show the range of Pt. in a scan
:return:
"""
# Get parameters
status, inp_list = gutil.parse_integers_editors([self.ui.lineEdit_exp, self.ui.lineEdit_run])
if status is False:
self.pop_one_button_dialog(inp_list)
return
else:
exp_no = inp_list[0]
scan_no = inp_list[1]
status, ret_obj = self._myControl.get_pt_numbers(exp_no, scan_no)
# Form message
if status is False:
# Failed to get Pt. list
error_message = ret_obj
self.pop_one_button_dialog(error_message)
else:
# Form message
pt_list = sorted(ret_obj)
num_pts = len(pt_list)
info = 'Exp %d Scan %d has %d Pt. ranging from %d to %d.\n' % (exp_no, scan_no, num_pts,
pt_list[0], pt_list[-1])
num_miss_pt = pt_list[-1] - pt_list[0] + 1 - num_pts
if num_miss_pt > 0:
info += 'There are %d Pt. skipped.\n' % num_miss_pt
self.pop_one_button_dialog(info)
return
def do_plot_3d(self):
"""
:return:
"""
# color: get R, G, B
status, rgb_values = guiutility.parse_float_editors([self.ui.lineEdit_baseColorRed,
self.ui.lineEdit_baseColorGreen,
self.ui.lineEdit_baseColorBlue])
assert status
# set the color to get change
change_r = self.ui.checkBox_changeRed.isChecked()
change_g = self.ui.checkBox_changeGreen.isChecked()
change_b = self.ui.checkBox_changeBlue.isChecked()
# get threshold
status, thresholds = guiutility.parse_integers_editors([self.ui.lineEdit_countsThresholdLower,
self.ui.lineEdit_countsThresholdUpper],
allow_blank=True)
assert status, thresholds
if thresholds[0] is None:
thresholds[0] = 0
if thresholds[1] is None:
thresholds[1] = sys.maxint
assert 0 <= thresholds[0] < thresholds[1]
# data key
data_key = int(self.ui.comboBox_dataKey.currentText())
# plot
self.plot_3d(data_key, rgb_values, thresholds, [change_r, change_g, change_b])
return
def show_scan_pt_list(self):
""" Show the range of Pt. in a scan
:return:
"""
# Get parameters
status, inp_list = gutil.parse_integers_editors(
[self.ui.lineEdit_exp, self.ui.lineEdit_run])
if status is False:
self.pop_one_button_dialog(inp_list)
return
else:
exp_no = inp_list[0]
scan_no = inp_list[1]
status, ret_obj = self._myControl.get_pt_numbers(exp_no, scan_no)
# Form message
if status is False:
# Failed to get Pt. list
error_message = ret_obj
self.pop_one_button_dialog(error_message)
else:
# Form message
pt_list = sorted(ret_obj)
num_pts = len(pt_list)
info = 'Exp %d Scan %d has %d Pt. ranging from %d to %d.\n' % (
exp_no, scan_no, num_pts, pt_list[0], pt_list[-1])
num_miss_pt = pt_list[-1] - pt_list[0] + 1 - num_pts
if num_miss_pt > 0:
info += 'There are %d Pt. skipped.\n' % num_miss_pt
self.pop_one_button_dialog(info)
return
def do_plot_next_pt_raw(self):
""" Plot the Pt.
"""
# Get measurement pt and the file number
status, ret_obj = gutil.parse_integers_editors([self.ui.lineEdit_exp,
self.ui.lineEdit_run,
self.ui.lineEdit_rawDataPtNo])
if status is True:
exp_no = ret_obj[0]
scan_no = ret_obj[1]
pt_no = ret_obj[2]
else:
self.pop_one_button_dialog(ret_obj)
return
# Previous one
pt_no += 1
# get last Pt. number
status, last_pt_no = self._myControl.get_pt_numbers(exp_no, scan_no)
if status is False:
error_message = last_pt_no
self.pop_one_button_dialog('Unable to access Spice table for scan %d. Reason" %s.' % (
scan_no, error_message))
if pt_no > last_pt_no:
self.pop_one_button_dialog('Pt. = %d is the last one of scan %d.' % (pt_no, scan_no))
return
else:
self.ui.lineEdit_rawDataPtNo.setText('%d' % pt_no)
# Plot
self._plot_raw_xml_2d(exp_no, scan_no, pt_no)
return
def do_check_counts(self):
""" Check the intensity and count how many data points are above threshold of specified data-key
:return:
"""
# get threshold (upper and lower)
status, ret_obj = guiutility.parse_integers_editors([self.ui.lineEdit_countsThresholdLower,
self.ui.lineEdit_countsThresholdUpper],
allow_blank=True)
assert status, ret_obj
threshold_lower, threshold_upper = ret_obj
if threshold_lower is None:
threshold_lower = 0
if threshold_upper is None:
threshold_upper = sys.maxint
assert 0 <= threshold_lower < threshold_upper
# get data key
data_key = int(self.ui.comboBox_dataKey.currentText())
assert data_key in self._dataKeyList, 'Data key %d does not exist in ' \
'key list %s.' % (data_key, str(self._dataKeyList))
# get intensity
points, intensity_array = self.ui.graphicsView.get_data(data_key)
assert points is not None
num_within_threshold = 0
array_size = len(intensity_array)
for index in xrange(array_size):
if threshold_lower <= intensity_array[index] <= threshold_upper:
num_within_threshold += 1
# END-FOR
# set value
self.ui.label_numberDataPoints.setText('%d' % num_within_threshold)
return
def do_plot_prev_pt_raw(self):
""" Plot the Pt.
"""
# Get measurement pt and the file number
status, ret_obj = gutil.parse_integers_editors([
self.ui.lineEdit_exp, self.ui.lineEdit_run,
self.ui.lineEdit_rawDataPtNo
])
if status is True:
exp_no = ret_obj[0]
scan_no = ret_obj[1]
pt_no = ret_obj[2]
else:
self.pop_one_button_dialog(ret_obj)
return
# Previous one
pt_no -= 1
if pt_no <= 0:
self.pop_one_button_dialog('Pt. = 1 is the first one.')
return
else:
self.ui.lineEdit_rawDataPtNo.setText('%d' % pt_no)
# Plot
self._plot_raw_xml_2d(exp_no, scan_no, pt_no)
return
def do_plot_prev_pt_raw(self):
""" Plot the Pt.
"""
# Get measurement pt and the file number
status, ret_obj = gutil.parse_integers_editors([self.ui.lineEdit_exp,
self.ui.lineEdit_run,
self.ui.lineEdit_rawDataPtNo])
if status is True:
exp_no = ret_obj[0]
scan_no = ret_obj[1]
pt_no = ret_obj[2]
else:
self.pop_one_button_dialog(ret_obj)
return
# Previous one
pt_no -= 1
if pt_no <= 0:
self.pop_one_button_dialog('Pt. = 1 is the first one.')
return
else:
self.ui.lineEdit_rawDataPtNo.setText('%d' % pt_no)
# Plot
self._plot_raw_xml_2d(exp_no, scan_no, pt_no)
return
def do_download_spice_data(self):
""" Download SPICE data
:return:
"""
# Check scans to download
scan_list_str = str(self.ui.lineEdit_downloadScans.text())
if len(scan_list_str) > 0:
# user specifies scans to download
valid, scan_list = fcutil.parse_int_array(scan_list_str)
if valid is False:
error_message = scan_list
self.pop_one_button_dialog(error_message)
else:
# Get all scans
status, ret_obj = gutil.parse_integers_editors(
[self.ui.lineEdit_exp])
if status is False:
self.pop_one_button_dialog(ret_obj)
return
exp_no = ret_obj
assert isinstance(exp_no, int)
server_url = str(self.ui.lineEdit_url.text())
scan_list = fcutil.get_scans_list(server_url,
exp_no,
return_list=True)
self.pop_one_button_dialog('Going to download scans %s.' %
str(scan_list))
# Check location
destination_dir = str(self.ui.lineEdit_localSrcDir.text())
status, error_message = self._myControl.set_local_data_dir(
destination_dir)
if status is False:
self.pop_one_button_dialog(error_message)
else:
self.pop_one_button_dialog(
'Spice files will be downloaded to %s.' % destination_dir)
# Set up myControl for downloading data
exp_no = int(self.ui.lineEdit_exp.text())
self._myControl.set_exp_number(exp_no)
server_url = str(self.ui.lineEdit_url.text())
status, error_message = self._myControl.set_server_url(server_url)
if status is False:
self.pop_one_button_dialog(error_message)
return
# Download
self._myControl.download_data_set(scan_list)
return
def do_find_peak(self):
""" Find peak in a given scan/pt and record it
"""
# Get experiment, scan and pt
status, ret_obj = gutil.parse_integers_editors([
self.ui.lineEdit_exp, self.ui.lineEdit_scanNumber,
self.ui.lineEdit_ptNumber
])
if status is True:
exp_no, scan_no, pt_no = ret_obj
else:
self.pop_one_button_dialog(ret_obj)
return
# Find peak
status, err_msg = self._myControl.find_peak(exp_no, scan_no, pt_no)
if status is False:
self.pop_one_button_dialog(ret_obj)
return
if self.ui.checkBox_loadHKLfromFile.isChecked() is True:
# This is the first time that in the workflow to get HKL from MD workspace
status, err_msg = self._myControl.set_hkl_to_peak(
exp_no, scan_no, pt_no)
if status is False:
self.pop_one_button_dialog(
'Unable to locate peak info due to %s.' % err_msg)
# Set up correct values to table tableWidget_peaksCalUB
self._myControl.add_peak_info(exp_no, scan_no, pt_no)
status, peak_info = self._myControl.get_peak_info(
exp_no, scan_no, pt_no)
if status is False:
err_msg = peak_info
raise KeyError(err_msg)
assert isinstance(peak_info, r4c.PeakInfo)
# Set the HKL value from PeakInfo directly
# BAD PROGRAMMING! THERE ARE TOO MANY WAYS TO ACCESS STORED HKL
h, k, l = peak_info.get_peak_ws_hkl()
self.ui.lineEdit_H.setText('%.2f' % h)
self.ui.lineEdit_K.setText('%.2f' % k)
self.ui.lineEdit_L.setText('%.2f' % l)
q_sample = peak_info.getQSample()
self.ui.lineEdit_sampleQx.setText('%.5E' % q_sample[0])
self.ui.lineEdit_sampleQy.setText('%.5E' % q_sample[1])
self.ui.lineEdit_sampleQz.setText('%.5E' % q_sample[2])
# self.set_ub_peak_table(peak_info)
return
def do_add_ub_peak(self):
""" Add current to ub peaks
:return:
"""
# Add peak
status, int_list = gutil.parse_integers_editors([
self.ui.lineEdit_exp, self.ui.lineEdit_scanNumber,
self.ui.lineEdit_ptNumber
])
if status is False:
self.pop_one_button_dialog(int_list)
exp_no, scan_no, pt_no = int_list
# Get HKL from GUI
status, float_list = gutil.parse_float_editors(
[self.ui.lineEdit_H, self.ui.lineEdit_K, self.ui.lineEdit_L])
if status is False:
err_msg = float_list
self.pop_one_button_dialog(err_msg)
return
h, k, l = float_list
status, peak_info_obj = self._myControl.get_peak_info(
exp_no, scan_no, pt_no)
if status is False:
error_message = peak_info_obj
self.pop_one_button_dialog(error_message)
return
assert isinstance(peak_info_obj, r4c.PeakInfo)
if self.ui.checkBox_roundHKLInt.isChecked():
h = math.copysign(1, h) * int(abs(h) + 0.5)
k = math.copysign(1, k) * int(abs(k) + 0.5)
l = math.copysign(1, l) * int(abs(l) + 0.5)
peak_info_obj.set_user_hkl(h, k, l)
self.set_ub_peak_table(peak_info_obj)
# Clear
self.ui.lineEdit_scanNumber.setText('')
self.ui.lineEdit_ptNumber.setText('')
self.ui.lineEdit_sampleQx.setText('')
self.ui.lineEdit_sampleQy.setText('')
self.ui.lineEdit_sampleQz.setText('')
self.ui.lineEdit_H.setText('')
self.ui.lineEdit_K.setText('')
self.ui.lineEdit_L.setText('')
return
def do_add_ub_peak(self):
""" Add current to ub peaks
:return:
"""
# Add peak
status, int_list = gutil.parse_integers_editors([self.ui.lineEdit_exp,
self.ui.lineEdit_scanNumber,
self.ui.lineEdit_ptNumber])
if status is False:
self.pop_one_button_dialog(int_list)
exp_no, scan_no, pt_no = int_list
# Get HKL from GUI
status, float_list = gutil.parse_float_editors([self.ui.lineEdit_H,
self.ui.lineEdit_K,
self.ui.lineEdit_L])
if status is False:
err_msg = float_list
self.pop_one_button_dialog(err_msg)
return
h, k, l = float_list
status, peak_info_obj = self._myControl.get_peak_info(exp_no, scan_no, pt_no)
if status is False:
error_message = peak_info_obj
self.pop_one_button_dialog(error_message)
return
assert isinstance(peak_info_obj, r4c.PeakInfo)
if self.ui.checkBox_roundHKLInt.isChecked():
h = math.copysign(1, h)*int(abs(h)+0.5)
k = math.copysign(1, k)*int(abs(k)+0.5)
l = math.copysign(1, l)*int(abs(l)+0.5)
peak_info_obj.set_user_hkl(h, k, l)
self.set_ub_peak_table(peak_info_obj)
# Clear
self.ui.lineEdit_scanNumber.setText('')
self.ui.lineEdit_ptNumber.setText('')
self.ui.lineEdit_sampleQx.setText('')
self.ui.lineEdit_sampleQy.setText('')
self.ui.lineEdit_sampleQz.setText('')
self.ui.lineEdit_H.setText('')
self.ui.lineEdit_K.setText('')
self.ui.lineEdit_L.setText('')
return
def do_find_peak(self):
""" Find peak in a given scan/pt and record it
"""
# Get experiment, scan and pt
status, ret_obj = gutil.parse_integers_editors([self.ui.lineEdit_exp,
self.ui.lineEdit_scanNumber,
self.ui.lineEdit_ptNumber])
if status is True:
exp_no, scan_no, pt_no = ret_obj
else:
self.pop_one_button_dialog(ret_obj)
return
# Find peak
status, err_msg = self._myControl.find_peak(exp_no, scan_no, pt_no)
if status is False:
self.pop_one_button_dialog(ret_obj)
return
if self.ui.checkBox_loadHKLfromFile.isChecked() is True:
# This is the first time that in the workflow to get HKL from MD workspace
status, err_msg = self._myControl.set_hkl_to_peak(exp_no, scan_no, pt_no)
if status is False:
self.pop_one_button_dialog('Unable to locate peak info due to %s.' % err_msg)
# Set up correct values to table tableWidget_peaksCalUB
self._myControl.add_peak_info(exp_no, scan_no, pt_no)
status, peak_info = self._myControl.get_peak_info(exp_no, scan_no, pt_no)
if status is False:
err_msg = peak_info
raise KeyError(err_msg)
assert isinstance(peak_info, r4c.PeakInfo)
# Set the HKL value from PeakInfo directly
# BAD PROGRAMMING! THERE ARE TOO MANY WAYS TO ACCESS STORED HKL
h, k, l = peak_info.get_peak_ws_hkl()
self.ui.lineEdit_H.setText('%.2f' % h)
self.ui.lineEdit_K.setText('%.2f' % k)
self.ui.lineEdit_L.setText('%.2f' % l)
q_sample = peak_info.getQSample()
self.ui.lineEdit_sampleQx.setText('%.5E' % q_sample[0])
self.ui.lineEdit_sampleQy.setText('%.5E' % q_sample[1])
self.ui.lineEdit_sampleQz.setText('%.5E' % q_sample[2])
# self.set_ub_peak_table(peak_info)
return
def do_download_spice_data(self):
""" Download SPICE data
:return:
"""
# Check scans to download
scan_list_str = str(self.ui.lineEdit_downloadScans.text())
if len(scan_list_str) > 0:
# user specifies scans to download
valid, scan_list = fcutil.parse_int_array(scan_list_str)
if valid is False:
error_message = scan_list
self.pop_one_button_dialog(error_message)
else:
# Get all scans
status, ret_obj = gutil.parse_integers_editors([self.ui.lineEdit_exp])
if status is False:
self.pop_one_button_dialog(ret_obj)
return
exp_no = ret_obj
assert isinstance(exp_no, int)
server_url = str(self.ui.lineEdit_url.text())
scan_list = fcutil.get_scans_list(server_url, exp_no, return_list=True)
self.pop_one_button_dialog('Going to download scans %s.' % str(scan_list))
# Check location
destination_dir = str(self.ui.lineEdit_localSrcDir.text())
status, error_message = self._myControl.set_local_data_dir(destination_dir)
if status is False:
self.pop_one_button_dialog(error_message)
else:
self.pop_one_button_dialog('Spice files will be downloaded to %s.' % destination_dir)
# Set up myControl for downloading data
exp_no = int(self.ui.lineEdit_exp.text())
self._myControl.set_exp_number(exp_no)
server_url = str(self.ui.lineEdit_url.text())
status, error_message = self._myControl.set_server_url(server_url)
if status is False:
self.pop_one_button_dialog(error_message)
return
# Download
self._myControl.download_data_set(scan_list)
return
def do_load_scan_info(self):
""" Load SIICE's scan file
:return:
"""
# Get scan number
status, ret_obj = gutil.parse_integers_editors([self.ui.lineEdit_run])
if status is True:
scan_no = ret_obj[0]
else:
err_msg = ret_obj
self.pop_one_button_dialog('Unable to get scan number in raw data tab due to %s.' % err_msg)
return
status, err_msg = self._myControl.load_spice_scan_file(exp_no=None, scan_no=scan_no)
if status is False:
self.pop_one_button_dialog(err_msg)
return
def do_plot_pt_raw(self):
""" Plot the Pt.
"""
# Get measurement pt and the file number
status, ret_obj = gutil.parse_integers_editors([self.ui.lineEdit_exp,
self.ui.lineEdit_run,
self.ui.lineEdit_rawDataPtNo])
if status is True:
exp_no = ret_obj[0]
scan_no = ret_obj[1]
pt_no = ret_obj[2]
else:
self.pop_one_button_dialog(ret_obj)
return
# Call to plot 2D
self._plot_raw_xml_2d(exp_no, scan_no, pt_no)
return
def do_cal_ub_matrix(self):
""" Calculate UB matrix by 2 or 3 reflections
"""
# Get reflections
num_rows = self.ui.tableWidget_peaksCalUB.rowCount()
peak_info_list = list()
status, exp_number = gutil.parse_integers_editors(self.ui.lineEdit_exp)
for i_row in xrange(num_rows):
if self.ui.tableWidget_peaksCalUB.is_selected(i_row) is True:
scan_num, pt_num = self.ui.tableWidget_peaksCalUB.get_exp_info(
i_row)
status, peak_info = self._myControl.get_peak_info(
exp_number, scan_num, pt_num)
peak_info.set_peak_ws_hkl_from_user()
if status is False:
self.pop_one_button_dialog(peak_info)
return
assert isinstance(peak_info, r4c.PeakInfo)
peak_info_list.append(peak_info)
# END-FOR
# Get lattice
status, ret_obj = self._get_lattice_parameters()
if status is True:
a, b, c, alpha, beta, gamma = ret_obj
else:
err_msg = ret_obj
self.pop_one_button_dialog(err_msg)
return
# Calculate UB matrix
status, ub_matrix = self._myControl.calculate_ub_matrix(
peak_info_list, a, b, c, alpha, beta, gamma)
# Deal with result
if status is True:
self._show_ub_matrix(ub_matrix)
else:
err_msg = ub_matrix
self.pop_one_button_dialog(err_msg)
return
def do_plot_pt_raw(self):
""" Plot the Pt.
"""
# Get measurement pt and the file number
status, ret_obj = gutil.parse_integers_editors([
self.ui.lineEdit_exp, self.ui.lineEdit_run,
self.ui.lineEdit_rawDataPtNo
])
if status is True:
exp_no = ret_obj[0]
scan_no = ret_obj[1]
pt_no = ret_obj[2]
else:
self.pop_one_button_dialog(ret_obj)
return
# Call to plot 2D
self._plot_raw_xml_2d(exp_no, scan_no, pt_no)
return
def do_set_experiment(self):
""" Set experiment
:return:
"""
status, ret_obj = gutil.parse_integers_editors([self.ui.lineEdit_exp])
if status is True:
exp_number = ret_obj[0]
curr_exp_number = self._myControl.get_experiment()
if curr_exp_number is not None and exp_number != curr_exp_number:
self.pop_one_button_dialog('Changing experiment to %d. Clean previous experiment %d\'s result'
' in Mantid manually.' % (exp_number, curr_exp_number))
self._myControl.set_exp_number(exp_number)
self.ui.lineEdit_exp.setStyleSheet('color: black')
else:
err_msg = ret_obj
self.pop_one_button_dialog('Unable to set experiment as %s' % err_msg)
self.ui.lineEdit_exp.setStyleSheet('color: red')
self.ui.tabWidget.setCurrentIndex(0)
return
def do_load_scan_info(self):
""" Load SIICE's scan file
:return:
"""
# Get scan number
status, ret_obj = gutil.parse_integers_editors([self.ui.lineEdit_run])
if status is True:
scan_no = ret_obj[0]
else:
err_msg = ret_obj
self.pop_one_button_dialog(
'Unable to get scan number in raw data tab due to %s.' %
err_msg)
return
status, err_msg = self._myControl.load_spice_scan_file(exp_no=None,
scan_no=scan_no)
if status is False:
self.pop_one_button_dialog(err_msg)
return
def do_cal_ub_matrix(self):
""" Calculate UB matrix by 2 or 3 reflections
"""
# Get reflections
num_rows = self.ui.tableWidget_peaksCalUB.rowCount()
peak_info_list = list()
status, exp_number = gutil.parse_integers_editors(self.ui.lineEdit_exp)
for i_row in xrange(num_rows):
if self.ui.tableWidget_peaksCalUB.is_selected(i_row) is True:
scan_num, pt_num = self.ui.tableWidget_peaksCalUB.get_exp_info(i_row)
status, peak_info = self._myControl.get_peak_info(exp_number, scan_num, pt_num)
peak_info.set_peak_ws_hkl_from_user()
if status is False:
self.pop_one_button_dialog(peak_info)
return
assert isinstance(peak_info, r4c.PeakInfo)
peak_info_list.append(peak_info)
# END-FOR
# Get lattice
status, ret_obj = self._get_lattice_parameters()
if status is True:
a, b, c, alpha, beta, gamma = ret_obj
else:
err_msg = ret_obj
self.pop_one_button_dialog(err_msg)
return
# Calculate UB matrix
status, ub_matrix = self._myControl.calculate_ub_matrix(peak_info_list, a, b, c,
alpha, beta, gamma)
# Deal with result
if status is True:
self._show_ub_matrix(ub_matrix)
else:
err_msg = ub_matrix
self.pop_one_button_dialog(err_msg)
return
def do_plot_3d(self):
"""
:return:
"""
# color: get R, G, B
status, rgb_values = guiutility.parse_float_editors([
self.ui.lineEdit_baseColorRed, self.ui.lineEdit_baseColorGreen,
self.ui.lineEdit_baseColorBlue
])
assert status
# set the color to get change
change_r = self.ui.checkBox_changeRed.isChecked()
change_g = self.ui.checkBox_changeGreen.isChecked()
change_b = self.ui.checkBox_changeBlue.isChecked()
# get threshold
status, thresholds = guiutility.parse_integers_editors(
[
self.ui.lineEdit_countsThresholdLower,
self.ui.lineEdit_countsThresholdUpper
],
allow_blank=True)
assert status, thresholds
if thresholds[0] is None:
thresholds[0] = 0
if thresholds[1] is None:
thresholds[1] = sys.maxint
assert 0 <= thresholds[0] < thresholds[1]
# data key
data_key = int(self.ui.comboBox_dataKey.currentText())
# plot
self.plot_3d(data_key, rgb_values, thresholds,
[change_r, change_g, change_b])
return
def do_set_experiment(self):
""" Set experiment
:return:
"""
status, ret_obj = gutil.parse_integers_editors([self.ui.lineEdit_exp])
if status is True:
exp_number = ret_obj[0]
curr_exp_number = self._myControl.get_experiment()
if curr_exp_number is not None and exp_number != curr_exp_number:
self.pop_one_button_dialog(
'Changing experiment to %d. Clean previous experiment %d\'s result'
' in Mantid manually.' % (exp_number, curr_exp_number))
self._myControl.set_exp_number(exp_number)
self.ui.lineEdit_exp.setStyleSheet('color: black')
else:
err_msg = ret_obj
self.pop_one_button_dialog('Unable to set experiment as %s' %
err_msg)
self.ui.lineEdit_exp.setStyleSheet('color: red')
self.ui.tabWidget.setCurrentIndex(0)
return
def do_check_counts(self):
""" Check the intensity and count how many data points are above threshold of specified data-key
:return:
"""
# get threshold (upper and lower)
status, ret_obj = guiutility.parse_integers_editors([
self.ui.lineEdit_countsThresholdLower,
self.ui.lineEdit_countsThresholdUpper
],
allow_blank=True)
assert status, ret_obj
threshold_lower, threshold_upper = ret_obj
if threshold_lower is None:
threshold_lower = 0
if threshold_upper is None:
threshold_upper = sys.maxint
assert 0 <= threshold_lower < threshold_upper
# get data key
data_key = int(self.ui.comboBox_dataKey.currentText())
assert data_key in self._dataKeyList, 'Data key %d does not exist in ' \
'key list %s.' % (data_key, str(self._dataKeyList))
# get intensity
points, intensity_array = self.ui.graphicsView.get_data(data_key)
assert points is not None
num_within_threshold = 0
array_size = len(intensity_array)
for index in xrange(array_size):
if threshold_lower <= intensity_array[index] <= threshold_upper:
num_within_threshold += 1
# END-FOR
# set value
self.ui.label_numberDataPoints.setText('%d' % num_within_threshold)
return
def do_find_peak(self):
"""
find the peak(s) in a merged scan
:return:
"""
# get scan number
status, ret_obj = guiutility.parse_integers_editors(
[self.ui.lineEdit_scanNumber])
if status:
scan_number = ret_obj[0]
else:
# pop error message
self._myParent.pop_one_button_dialog(ret_obj)
return
# load HKL from SPICE?
hkl_from_spice = self.ui.checkBox_loadHKLfromFile.isChecked()
# find peak
status, ret_obj = self._myParent.find_peak_in_scan(
scan_number, hkl_from_spice)
# set the result
if status:
hkl, vec_q = ret_obj
if len(hkl) > 0:
self.ui.lineEdit_H.setText('%.2f' % hkl[0])
self.ui.lineEdit_K.setText('%.2f' % hkl[1])
self.ui.lineEdit_L.setText('%.2f' % hkl[2])
self.ui.lineEdit_sampleQx.setText('%.5E' % vec_q[0])
self.ui.lineEdit_sampleQy.setText('%.5E' % vec_q[1])
self.ui.lineEdit_sampleQz.setText('%.5E' % vec_q[2])
# END-IF
return
def do_plot_next_pt_raw(self):
""" Plot the Pt.
"""
# Get measurement pt and the file number
status, ret_obj = gutil.parse_integers_editors([
self.ui.lineEdit_exp, self.ui.lineEdit_run,
self.ui.lineEdit_rawDataPtNo
])
if status is True:
exp_no = ret_obj[0]
scan_no = ret_obj[1]
pt_no = ret_obj[2]
else:
self.pop_one_button_dialog(ret_obj)
return
# Previous one
pt_no += 1
# get last Pt. number
status, last_pt_no = self._myControl.get_pt_numbers(exp_no, scan_no)
if status is False:
error_message = last_pt_no
self.pop_one_button_dialog(
'Unable to access Spice table for scan %d. Reason" %s.' %
(scan_no, error_message))
if pt_no > last_pt_no:
self.pop_one_button_dialog('Pt. = %d is the last one of scan %d.' %
(pt_no, scan_no))
return
else:
self.ui.lineEdit_rawDataPtNo.setText('%d' % pt_no)
# Plot
self._plot_raw_xml_2d(exp_no, scan_no, pt_no)
return
