def processmsg(self, data):
messageProcessingStartTime = time.time()
shared.numberOfMessagesProcessed += 1
# queues.UISignalQueue.put((
# 'updateNumberOfMessagesProcessed', 'no data'))
readPosition = 20 # bypass the nonce, time, and object type
msgVersion, msgVersionLength = decodeVarint(data[readPosition:readPosition + 9])
if msgVersion != 1:
logger.info('Cannot understand message versions other than one. Ignoring message.')
return
readPosition += msgVersionLength
streamNumberAsClaimedByMsg, streamNumberAsClaimedByMsgLength = decodeVarint(
data[readPosition:readPosition + 9])
readPosition += streamNumberAsClaimedByMsgLength
inventoryHash = calculateInventoryHash(data)
initialDecryptionSuccessful = False
# This is not an acknowledgement bound for me. See if it is a message
# bound for me by trying to decrypt it with my private keys.
for key, cryptorObject in shared.myECCryptorObjects.items():
try:
if initialDecryptionSuccessful: # continue decryption attempts to avoid timing attacks
cryptorObject.decrypt(data[readPosition:])
else:
decryptedData = cryptorObject.decrypt(data[readPosition:])
toRipe = key # This is the RIPE hash of my pubkeys. We need this below to compare to the destination_ripe included in the encrypted data.
initialDecryptionSuccessful = True
logger.info('EC decryption successful using key associated with ripe hash: %s.' % hexlify(key))
except Exception as err:
pass
if not initialDecryptionSuccessful:
# This is not a message bound for me.
logger.info('Length of time program spent failing to decrypt this message: %s seconds.' % (time.time() - messageProcessingStartTime,))
return
# This is a message bound for me.
toAddress = shared.myAddressesByHash[
toRipe] # Look up my address based on the RIPE hash.
readPosition = 0
sendersAddressVersionNumber, sendersAddressVersionNumberLength = decodeVarint(
decryptedData[readPosition:readPosition + 10])
readPosition += sendersAddressVersionNumberLength
if sendersAddressVersionNumber == 0:
logger.info('Cannot understand sendersAddressVersionNumber = 0. Ignoring message.')
return
if sendersAddressVersionNumber > 4:
logger.info('Sender\'s address version number %s not yet supported. Ignoring message.' % sendersAddressVersionNumber)
return
if len(decryptedData) < 170:
logger.info('Length of the unencrypted data is unreasonably short. Sanity check failed. Ignoring message.')
return
sendersStreamNumber, sendersStreamNumberLength = decodeVarint(
decryptedData[readPosition:readPosition + 10])
if sendersStreamNumber == 0:
logger.info('sender\'s stream number is 0. Ignoring message.')
return
readPosition += sendersStreamNumberLength
behaviorBitfield = decryptedData[readPosition:readPosition + 4]
readPosition += 4
pubSigningKey = '\x04' + decryptedData[
readPosition:readPosition + 64]
readPosition += 64
pubEncryptionKey = '\x04' + decryptedData[
readPosition:readPosition + 64]
readPosition += 64
if sendersAddressVersionNumber >= 3:
requiredAverageProofOfWorkNonceTrialsPerByte, varintLength = decodeVarint(
decryptedData[readPosition:readPosition + 10])
readPosition += varintLength
logger.info('sender\'s requiredAverageProofOfWorkNonceTrialsPerByte is %s' % requiredAverageProofOfWorkNonceTrialsPerByte)
requiredPayloadLengthExtraBytes, varintLength = decodeVarint(
decryptedData[readPosition:readPosition + 10])
readPosition += varintLength
logger.info('sender\'s requiredPayloadLengthExtraBytes is %s' % requiredPayloadLengthExtraBytes)
endOfThePublicKeyPosition = readPosition # needed for when we store the pubkey in our database of pubkeys for later use.
if toRipe != decryptedData[readPosition:readPosition + 20]:
logger.info('The original sender of this message did not send it to you. Someone is attempting a Surreptitious Forwarding Attack.\n\
See: http://world.std.com/~dtd/sign_encrypt/sign_encrypt7.html \n\
your toRipe: %s\n\
embedded destination toRipe: %s' % (hexlify(toRipe), hexlify(decryptedData[readPosition:readPosition + 20]))
)
return
readPosition += 20
messageEncodingType, messageEncodingTypeLength = decodeVarint(
decryptedData[readPosition:readPosition + 10])
readPosition += messageEncodingTypeLength
messageLength, messageLengthLength = decodeVarint(
decryptedData[readPosition:readPosition + 10])
readPosition += messageLengthLength
message = decryptedData[readPosition:readPosition + messageLength]
# print 'First 150 characters of message:', repr(message[:150])
readPosition += messageLength
ackLength, ackLengthLength = decodeVarint(
decryptedData[readPosition:readPosition + 10])
readPosition += ackLengthLength
ackData = decryptedData[readPosition:readPosition + ackLength]
readPosition += ackLength
positionOfBottomOfAckData = readPosition # needed to mark the end of what is covered by the signature
signatureLength, signatureLengthLength = decodeVarint(
decryptedData[readPosition:readPosition + 10])
readPosition += signatureLengthLength
signature = decryptedData[
readPosition:readPosition + signatureLength]
signedData = data[8:20] + encodeVarint(1) + encodeVarint(streamNumberAsClaimedByMsg) + decryptedData[:positionOfBottomOfAckData]
if not highlevelcrypto.verify(signedData, signature, hexlify(pubSigningKey)):
logger.debug('ECDSA verify failed')
return
logger.debug('ECDSA verify passed')
logger.debug('As a matter of intellectual curiosity, here is the Bitcoin address associated with the keys owned by the other person: %s ..and here is the testnet address: %s. The other person must take their private signing key from Bitmessage and import it into Bitcoin (or a service like Blockchain.info) for it to be of any use. Do not use this unless you know what you are doing.' %
(helper_bitcoin.calculateBitcoinAddressFromPubkey(pubSigningKey), helper_bitcoin.calculateTestnetAddressFromPubkey(pubSigningKey))
)
sigHash = hashlib.sha512(hashlib.sha512(signature).digest()).digest()[32:] # Used to detect and ignore duplicate messages in our inbox
# calculate the fromRipe.
sha = hashlib.new('sha512')
sha.update(pubSigningKey + pubEncryptionKey)
ripe = hashlib.new('ripemd160')
ripe.update(sha.digest())
fromAddress = encodeAddress(
sendersAddressVersionNumber, sendersStreamNumber, ripe.digest())
# Let's store the public key in case we want to reply to this
# person.
sqlExecute(
'''INSERT INTO pubkeys VALUES (?,?,?,?,?)''',
fromAddress,
sendersAddressVersionNumber,
decryptedData[:endOfThePublicKeyPosition],
int(time.time()),
'yes')
# Check to see whether we happen to be awaiting this
# pubkey in order to send a message. If we are, it will do the POW
# and send it.
self.possibleNewPubkey(fromAddress)
# If this message is bound for one of my version 3 addresses (or
# higher), then we must check to make sure it meets our demanded
# proof of work requirement. If this is bound for one of my chan
# addresses then we skip this check; the minimum network POW is
# fine.
if decodeAddress(toAddress)[1] >= 3 and not BMConfigParser().safeGetBoolean(toAddress, 'chan'): # If the toAddress version number is 3 or higher and not one of my chan addresses:
if not shared.isAddressInMyAddressBookSubscriptionsListOrWhitelist(fromAddress): # If I'm not friendly with this person:
requiredNonceTrialsPerByte = BMConfigParser().getint(
toAddress, 'noncetrialsperbyte')
requiredPayloadLengthExtraBytes = BMConfigParser().getint(
toAddress, 'payloadlengthextrabytes')
if not protocol.isProofOfWorkSufficient(data, requiredNonceTrialsPerByte, requiredPayloadLengthExtraBytes):
logger.info('Proof of work in msg is insufficient only because it does not meet our higher requirement.')
return
blockMessage = False # Gets set to True if the user shouldn't see the message according to black or white lists.
if BMConfigParser().get('bitmessagesettings', 'blackwhitelist') == 'black': # If we are using a blacklist
queryreturn = sqlQuery(
'''SELECT label FROM blacklist where address=? and enabled='1' ''',
fromAddress)
if queryreturn != []:
logger.info('Message ignored because address is in blacklist.')
blockMessage = True
else: # We're using a whitelist
queryreturn = sqlQuery(
'''SELECT label FROM whitelist where address=? and enabled='1' ''',
fromAddress)
if queryreturn == []:
logger.info('Message ignored because address not in whitelist.')
blockMessage = True
toLabel = BMConfigParser().get(toAddress, 'label')
if toLabel == '':
toLabel = toAddress
decodedMessage = helper_msgcoding.MsgDecode(messageEncodingType, message)
subject = decodedMessage.subject
body = decodedMessage.body
# Let us make sure that we haven't already received this message
if helper_inbox.isMessageAlreadyInInbox(sigHash):
logger.info('This msg is already in our inbox. Ignoring it.')
blockMessage = True
if not blockMessage:
if messageEncodingType != 0:
t = (inventoryHash, toAddress, fromAddress, subject, int(
time.time()), body, 'inbox', messageEncodingType, 0, sigHash)
helper_inbox.insert(t)
queues.UISignalQueue.put(('displayNewInboxMessage', (
inventoryHash, toAddress, fromAddress, subject, body)))
# If we are behaving as an API then we might need to run an
# outside command to let some program know that a new message
# has arrived.
if BMConfigParser().safeGetBoolean('bitmessagesettings', 'apienabled'):
try:
apiNotifyPath = BMConfigParser().get(
'bitmessagesettings', 'apinotifypath')
except:
apiNotifyPath = ''
if apiNotifyPath != '':
call([apiNotifyPath, "newMessage"])
# Let us now check and see whether our receiving address is
# behaving as a mailing list
if BMConfigParser().safeGetBoolean(toAddress, 'mailinglist') and messageEncodingType != 0:
try:
mailingListName = BMConfigParser().get(
toAddress, 'mailinglistname')
except:
mailingListName = ''
# Let us send out this message as a broadcast
subject = self.addMailingListNameToSubject(
subject, mailingListName)
# Let us now send this message out as a broadcast
message = time.strftime("%a, %Y-%m-%d %H:%M:%S UTC", time.gmtime(
)) + ' Message ostensibly from ' + fromAddress + ':\n\n' + body
fromAddress = toAddress # The fromAddress for the broadcast that we are about to send is the toAddress (my address) for the msg message we are currently processing.
ackdataForBroadcast = OpenSSL.rand(
32) # We don't actually need the ackdataForBroadcast for acknowledgement since this is a broadcast message but we can use it to update the user interface when the POW is done generating.
toAddress = '[Broadcast subscribers]'
ripe = ''
# We really should have a discussion about how to
# set the TTL for mailing list broadcasts. This is obviously
# hard-coded.
TTL = 2*7*24*60*60 # 2 weeks
t = ('',
toAddress,
ripe,
fromAddress,
subject,
message,
ackdataForBroadcast,
int(time.time()), # sentTime (this doesn't change)
int(time.time()), # lastActionTime
0,
'broadcastqueued',
0,
'sent',
messageEncodingType,
TTL)
helper_sent.insert(t)
queues.UISignalQueue.put(('displayNewSentMessage', (
toAddress, '[Broadcast subscribers]', fromAddress, subject, message, ackdataForBroadcast)))
queues.workerQueue.put(('sendbroadcast', ''))
# Don't send ACK if invalid, blacklisted senders, invisible messages, disabled or chan
if self.ackDataHasAValidHeader(ackData) and \
not blockMessage and \
messageEncodingType != 0 and \
not BMConfigParser().safeGetBoolean(toAddress, 'dontsendack') and \
not BMConfigParser().safeGetBoolean(toAddress, 'chan'):
shared.checkAndShareObjectWithPeers(ackData[24:])
# Display timing data
timeRequiredToAttemptToDecryptMessage = time.time(
) - messageProcessingStartTime
shared.successfullyDecryptMessageTimings.append(
timeRequiredToAttemptToDecryptMessage)
sum = 0
for item in shared.successfullyDecryptMessageTimings:
sum += item
logger.debug('Time to decrypt this message successfully: %s\n\
Average time for all message decryption successes since startup: %s.' %
(timeRequiredToAttemptToDecryptMessage, sum / len(shared.successfullyDecryptMessageTimings))
)
def processbroadcast(self, data):
messageProcessingStartTime = time.time()
shared.numberOfBroadcastsProcessed += 1
queues.UISignalQueue.put(
('updateNumberOfBroadcastsProcessed', 'no data'))
inventoryHash = calculateInventoryHash(data)
readPosition = 20 # bypass the nonce, time, and object type
broadcastVersion, broadcastVersionLength = decodeVarint(
data[readPosition:readPosition + 9])
readPosition += broadcastVersionLength
if broadcastVersion < 4 or broadcastVersion > 5:
logger.info(
'Cannot decode incoming broadcast versions less than 4'
' or higher than 5. Assuming the sender isn\'t being silly,'
' you should upgrade Bitmessage because this message shall'
' be ignored.')
return
cleartextStreamNumber, cleartextStreamNumberLength = decodeVarint(
data[readPosition:readPosition + 10])
readPosition += cleartextStreamNumberLength
if broadcastVersion == 4:
# v4 broadcasts are encrypted the same way the msgs are
# encrypted. To see if we are interested in a v4 broadcast,
# we try to decrypt it. This was replaced with v5 broadcasts
# which include a tag which we check instead, just like we do
# with v4 pubkeys.
signedData = data[8:readPosition]
initialDecryptionSuccessful = False
for key, cryptorObject in sorted(
shared.MyECSubscriptionCryptorObjects.items(),
key=lambda x: random.random()):
try:
# continue decryption attempts to avoid timing attacks
if initialDecryptionSuccessful:
cryptorObject.decrypt(data[readPosition:])
else:
decryptedData = cryptorObject.decrypt(
data[readPosition:])
# This is the RIPE hash of the sender's pubkey.
# We need this below to compare to the RIPE hash
# of the sender's address to verify that it was
# encrypted by with their key rather than some
# other key.
toRipe = key
initialDecryptionSuccessful = True
logger.info(
'EC decryption successful using key associated'
' with ripe hash: %s', hexlify(key))
except Exception:
logger.debug('cryptorObject.decrypt Exception:',
exc_info=True)
if not initialDecryptionSuccessful:
# This is not a broadcast I am interested in.
logger.debug(
'Length of time program spent failing to decrypt this'
' v4 broadcast: %s seconds.',
time.time() - messageProcessingStartTime)
return
elif broadcastVersion == 5:
embeddedTag = data[readPosition:readPosition + 32]
readPosition += 32
if embeddedTag not in shared.MyECSubscriptionCryptorObjects:
logger.debug('We\'re not interested in this broadcast.')
return
# We are interested in this broadcast because of its tag.
# We're going to add some more data which is signed further down.
signedData = data[8:readPosition]
cryptorObject = shared.MyECSubscriptionCryptorObjects[embeddedTag]
try:
decryptedData = cryptorObject.decrypt(data[readPosition:])
logger.debug('EC decryption successful')
except Exception:
logger.debug('Broadcast version %s decryption Unsuccessful.',
broadcastVersion)
return
# At this point this is a broadcast I have decrypted and am
# interested in.
readPosition = 0
sendersAddressVersion, sendersAddressVersionLength = decodeVarint(
decryptedData[readPosition:readPosition + 9])
if broadcastVersion == 4:
if sendersAddressVersion < 2 or sendersAddressVersion > 3:
logger.warning(
'Cannot decode senderAddressVersion other than 2 or 3.'
' Assuming the sender isn\'t being silly, you should'
' upgrade Bitmessage because this message shall be'
' ignored.')
return
elif broadcastVersion == 5:
if sendersAddressVersion < 4:
logger.info(
'Cannot decode senderAddressVersion less than 4 for'
' broadcast version number 5. Assuming the sender'
' isn\'t being silly, you should upgrade Bitmessage'
' because this message shall be ignored.')
return
readPosition += sendersAddressVersionLength
sendersStream, sendersStreamLength = decodeVarint(
decryptedData[readPosition:readPosition + 9])
if sendersStream != cleartextStreamNumber:
logger.info(
'The stream number outside of the encryption on which the'
' POW was completed doesn\'t match the stream number'
' inside the encryption. Ignoring broadcast.')
return
readPosition += sendersStreamLength
readPosition += 4
sendersPubSigningKey = '\x04' + \
decryptedData[readPosition:readPosition + 64]
readPosition += 64
sendersPubEncryptionKey = '\x04' + \
decryptedData[readPosition:readPosition + 64]
readPosition += 64
if sendersAddressVersion >= 3:
requiredAverageProofOfWorkNonceTrialsPerByte, varintLength = \
decodeVarint(decryptedData[readPosition:readPosition + 10])
readPosition += varintLength
logger.debug(
'sender\'s requiredAverageProofOfWorkNonceTrialsPerByte'
' is %s', requiredAverageProofOfWorkNonceTrialsPerByte)
requiredPayloadLengthExtraBytes, varintLength = decodeVarint(
decryptedData[readPosition:readPosition + 10])
readPosition += varintLength
logger.debug('sender\'s requiredPayloadLengthExtraBytes is %s',
requiredPayloadLengthExtraBytes)
endOfPubkeyPosition = readPosition
sha = hashlib.new('sha512')
sha.update(sendersPubSigningKey + sendersPubEncryptionKey)
ripeHasher = hashlib.new('ripemd160')
ripeHasher.update(sha.digest())
calculatedRipe = ripeHasher.digest()
if broadcastVersion == 4:
if toRipe != calculatedRipe:
logger.info('The encryption key used to encrypt this message'
' doesn\'t match the keys inbedded in the message'
' itself. Ignoring message.')
return
elif broadcastVersion == 5:
calculatedTag = hashlib.sha512(
hashlib.sha512(
encodeVarint(sendersAddressVersion) +
encodeVarint(sendersStream) +
calculatedRipe).digest()).digest()[32:]
if calculatedTag != embeddedTag:
logger.debug('The tag and encryption key used to encrypt this'
' message doesn\'t match the keys inbedded in the'
' message itself. Ignoring message.')
return
messageEncodingType, messageEncodingTypeLength = decodeVarint(
decryptedData[readPosition:readPosition + 9])
if messageEncodingType == 0:
return
readPosition += messageEncodingTypeLength
messageLength, messageLengthLength = decodeVarint(
decryptedData[readPosition:readPosition + 9])
readPosition += messageLengthLength
message = decryptedData[readPosition:readPosition + messageLength]
readPosition += messageLength
readPositionAtBottomOfMessage = readPosition
signatureLength, signatureLengthLength = decodeVarint(
decryptedData[readPosition:readPosition + 9])
readPosition += signatureLengthLength
signature = decryptedData[readPosition:readPosition + signatureLength]
signedData += decryptedData[:readPositionAtBottomOfMessage]
if not highlevelcrypto.verify(signedData, signature,
hexlify(sendersPubSigningKey)):
logger.debug('ECDSA verify failed')
return
logger.debug('ECDSA verify passed')
# Used to detect and ignore duplicate messages in our inbox
sigHash = hashlib.sha512(
hashlib.sha512(signature).digest()).digest()[32:]
fromAddress = encodeAddress(sendersAddressVersion, sendersStream,
calculatedRipe)
logger.info('fromAddress: %s' % fromAddress)
# Let's store the public key in case we want to reply to this person.
sqlExecute('''INSERT INTO pubkeys VALUES (?,?,?,?,?)''', fromAddress,
sendersAddressVersion, decryptedData[:endOfPubkeyPosition],
int(time.time()), 'yes')
# Check to see whether we happen to be awaiting this
# pubkey in order to send a message. If we are, it will do the POW
# and send it.
self.possibleNewPubkey(fromAddress)
fromAddress = encodeAddress(sendersAddressVersion, sendersStream,
calculatedRipe)
logger.debug('fromAddress: ' + fromAddress)
try:
decodedMessage = helper_msgcoding.MsgDecode(
messageEncodingType, message)
except helper_msgcoding.MsgDecodeException:
return
subject = decodedMessage.subject
body = decodedMessage.body
toAddress = '[Broadcast subscribers]'
if helper_inbox.isMessageAlreadyInInbox(sigHash):
logger.info('This broadcast is already in our inbox. Ignoring it.')
return
t = (inventoryHash, toAddress, fromAddress, subject, int(time.time()),
body, 'inbox', messageEncodingType, 0, sigHash)
helper_inbox.insert(t)
queues.UISignalQueue.put(
('displayNewInboxMessage', (inventoryHash, toAddress, fromAddress,
subject, body)))
# If we are behaving as an API then we might need to run an
# outside command to let some program know that a new message
# has arrived.
if BMConfigParser().safeGetBoolean('bitmessagesettings', 'apienabled'):
try:
apiNotifyPath = BMConfigParser().get('bitmessagesettings',
'apinotifypath')
except:
apiNotifyPath = ''
if apiNotifyPath != '':
call([apiNotifyPath, "newBroadcast"])
# Display timing data
logger.info('Time spent processing this interesting broadcast: %s',
time.time() - messageProcessingStartTime)
