def main(options, args):
# If using ANSI coloring is available, initialize colorama
if fail_color:
init()
# Import intelhex if avaialable, otherwise fail
try:
from intelhex import IntelHex
except:
return fail(
'error: You do not have \'intelhex\' installed. Please run \'pip install intelhex\' then retry.'
)
if len(options.output) is 0:
print "No output file specified"
exit(1)
if len(args) < 2:
return fail('Only one file was provided to merge.')
exit(0)
# Get the first hex file, merge the remainder and save the result
orig = IntelHex(args[0])
convert_start_addr(orig)
args = args[1:]
for arg in args:
other = IntelHex(arg)
convert_start_addr(other)
orig.merge(other, overlap='replace')
orig.write_hex_file(options.output)
def build_image(stack, app, passkey, out):
passkey_index = 0
signature = 0xdeadbeef
ih = IntelHex(app)
for i in range(0, len(ih)):
if ih[i] == (signature & 0xff) and ih[i + 1] == (
(signature >> 8) & 0xff) and ih[i + 2] == (
(signature >> 16) & 0xff) and ih[i + 3] == ((signature >> 24)
& 0xff):
if passkey_index == 0:
passkey_index = i
else:
raise RuntimeError('Found passkey signature twice?!')
if passkey_index == 0:
raise RuntimeError('Passkey signature was not found!')
print('Setting new passkey %06d' % passkey)
ih[passkey_index] = passkey & 0xff
ih[passkey_index + 1] = (passkey >> 8) & 0xff
ih[passkey_index + 2] = (passkey >> 16) & 0xff
ih[passkey_index + 3] = (passkey >> 24) & 0xff
stack = IntelHex(stack)
ih.merge(stack)
ih.write_hex_file(out, byte_count=32)
def generate_provision_hex_file(s0_address, s1_address, hashes, provision_address, output, max_size,
num_counter_slots_version):
# Add addresses
provision_data = struct.pack('III', s0_address, s1_address, len(hashes))
for mhash in hashes:
provision_data += struct.pack('I', 0xFFFFFFFF) # Invalidation token
provision_data += mhash
num_counters = 1 if num_counter_slots_version > 0 else 0
provision_data += struct.pack('H', 1) # Type "counter collection"
provision_data += struct.pack('H', num_counters)
if num_counters == 1:
if num_counter_slots_version % 2 == 1:
num_counter_slots_version += 1
print(f'Monotonic counter slots rounded up to {num_counter_slots_version}')
provision_data += struct.pack('H', 1) # counter description
provision_data += struct.pack('H', num_counter_slots_version)
assert (len(provision_data) + (2 * num_counter_slots_version)) <= max_size, """Provisioning data doesn't fit.
Reduce the number of public keys or counter slots and try again."""
ih = IntelHex()
ih.frombytes(provision_data, offset=provision_address)
ih.write_hex_file(output)
def __init__(self, fw, channel=16, serial_port=None, snr=None):
'''
Ininitialises the OTA Flasher class which handles flashing the devboard
with the needed OTA Server firmware and the update file for the OTA Client.
The said devboard shall become the OTA Server which shall propagate the
image on the Zigbee network.
Keyword arguments:
fw -- path to the update file for the OTA Client
channel -- a 802.15.4 channel number, on which the OTA Server shall operate (default 16)
serial_port -- a serial port of the connected devboard which shall be flashed with OTA Server
snr -- a JLink serial number of the connected devboard which shall be flashed with OTA Server
Note: only one parameter out of (serial_port, snr) must be provided, since the superclass
constructor shall handle resolving the rest.
'''
# Call the superclass constructor
super().__init__(serial_port, snr)
# Create a Intel Hex out of the Zigbee Update file
ih = IntelHex()
update = open(fw, 'rb').read()
ih.puts(OTAFlasher.OTA_UPDATE_OFFSET, update)
self.update_firmware_hex = fw + '.hex'
ih.write_hex_file(self.update_firmware_hex)
# Open the serial channel to the devboard and save the 802.15.4 channel
self.ser = Serial(self.serial_port, 115200)
self.channel = channel
def sign_and_append_validation_data(pem_file, input_file, offset, output_file,
magic_value, pk_hash_len):
ih = IntelHex(input_file)
ih.start_addr = None # OBJCOPY incorrectly inserts x86 specific records, remove the start_addr as it is wrong.
minimum_offset = ((ih.maxaddr() // 4) + 1) * 4
if offset != 0 and offset < minimum_offset:
raise RuntimeError("Incorrect offset, must be bigger than %x" %
minimum_offset)
# Parse comma-separated string of uint32s into hex string. Each in is encoded
# in little-endian byte order
parsed_magic_value = b''.join(
[struct.pack("<I", int(m, 0)) for m in magic_value.split(",")])
validation_data = get_validation_data(pem_file=pem_file,
input_hex=ih,
magic_value=parsed_magic_value,
pk_hash_len=pk_hash_len)
validation_data_hex = IntelHex()
# If no offset is given, append metadata right after input hex file (word aligned).
if offset == 0:
offset = minimum_offset
validation_data_hex.frombytes(validation_data, offset)
ih.merge(validation_data_hex)
ih.write_hex_file(output_file)
def append_validation_data(signature, input_file, public_key, offset, output_hex, output_bin, magic_value):
ih = IntelHex(input_file)
ih.start_addr = None # OBJCOPY incorrectly inserts x86 specific records, remove the start_addr as it is wrong.
minimum_offset = ((ih.maxaddr() // 4) + 1) * 4
if offset != 0 and offset < minimum_offset:
raise RuntimeError(f'Incorrect offset, must be bigger than {hex(minimum_offset)}')
# Parse comma-separated string of uint32s into hex string. Each is encoded in little-endian byte order
parsed_magic_value = b''.join([struct.pack('<I', int(m, 0)) for m in magic_value.split(',')])
validation_data = get_validation_data(signature_bytes=signature,
input_hex=ih,
public_key=public_key,
magic_value=parsed_magic_value)
validation_data_hex = IntelHex()
# If no offset is given, append metadata right after input hex file (word aligned).
if offset == 0:
offset = minimum_offset
validation_data_hex.frombytes(validation_data, offset)
ih.merge(validation_data_hex)
ih.write_hex_file(output_hex)
if output_bin:
ih.tofile(output_bin.name, format='bin')
def read(start, lenght, fname):
stop=start+lenght
f=fname
print "Dumping from %04x to %04x as %s." % (start,stop,f)
#h = IntelHex16bit(None)
# FIXME: get mcu state and return it to that state
try:
h = IntelHex(None)
i=start
while i<=stop:
#data=client.ARMreadMem(i, 48)
data=client.ARMreadChunk(i, 48, verbose=0)
print "Dumped %06x."%i
for dword in data:
if i<=stop and dword != 0xdeadbeef:
h.puts( i, struct.pack("<I", dword) )
i+=4
# FIXME: get mcu state and return it to that state
except:
print "Unknown error during read. Writing results to output file."
print "Rename file with last address dumped %06x."%i
pass
h.write_hex_file(f)
def binary_hook(t_self, resources, _, binf):
"""Hook that merges the soft device with the bin file"""
# Scan to find the actual paths of soft device
sdf = None
for softdevice_and_offset_entry\
in t_self.target.EXPECTED_SOFTDEVICES_WITH_OFFSETS:
for hexf in resources.hex_files:
if hexf.find(softdevice_and_offset_entry['name']) != -1:
t_self.notify.debug("SoftDevice file found %s." %
softdevice_and_offset_entry['name'])
sdf = hexf
if sdf is not None:
break
if sdf is not None:
break
if sdf is None:
t_self.notify.debug("Hex file not found. Aborting.")
return
# Look for bootloader file that matches this soft device or bootloader
# override image
blf = None
if t_self.target.MERGE_BOOTLOADER is True:
for hexf in resources.hex_files:
if hexf.find(t_self.target.OVERRIDE_BOOTLOADER_FILENAME) != -1:
t_self.notify.debug(
"Bootloader file found %s." %
t_self.target.OVERRIDE_BOOTLOADER_FILENAME)
blf = hexf
break
elif hexf.find(softdevice_and_offset_entry['boot']) != -1:
t_self.notify.debug("Bootloader file found %s." %
softdevice_and_offset_entry['boot'])
blf = hexf
break
# Merge user code with softdevice
from intelhex import IntelHex
binh = IntelHex()
_, ext = os.path.splitext(binf)
if ext == ".hex":
binh.loadhex(binf)
elif ext == ".bin":
binh.loadbin(binf, softdevice_and_offset_entry['offset'])
if t_self.target.MERGE_SOFT_DEVICE is True:
t_self.notify.debug("Merge SoftDevice file %s" %
softdevice_and_offset_entry['name'])
sdh = IntelHex(sdf)
binh.merge(sdh)
if t_self.target.MERGE_BOOTLOADER is True and blf is not None:
t_self.notify.debug("Merge BootLoader file %s" % blf)
blh = IntelHex(blf)
binh.merge(blh)
with open(binf.replace(".bin", ".hex"), "w") as fileout:
binh.write_hex_file(fileout, write_start_addr=False)
def main(arguments):
# If using ANSI coloring is available, initialize colorama
if fail_color:
init()
# Import intelhex if avaialable, otherwise fail
try:
from intelhex import IntelHex
except:
return fail(
'error: You do not have \'intelhex\' installed. Please run \'pip install intelhex\' then retry.'
)
# Ensure the right number of arguments are supplied
if not len(arguments) == 3:
return fail(
'error: Improper use of merge_hex.py.\nUSAGE: merge_hex.py input_file1 input_file2 output_file.'
)
# Get the two hex files, merge them, and save the result
orig = IntelHex(arguments[0])
convert_start_addr(orig)
new = IntelHex(arguments[1])
convert_start_addr(new)
orig.merge(new, overlap='replace')
orig.write_hex_file(arguments[2])
def main(id, src_path):
eeprom_path = "eeprom_temp.hex"
eeprom_contents = IntelHex("eedump_0.hex")
eeprom_contents[6] = id
eeprom_contents[10] = 0
# Seen all badges & uber badges
"""
for i in range(100):
eeprom_contents[10+i] = 1
"""
# Seen some badges & uber badges
"""
for i in range(0,100,2):
eeprom_contents[10+i] = 1
"""
# Seen all uber badges
"""
for i in range(10):
eeprom_contents[10+i] = 1
"""
# Seen all badges, not all uber
"""
for i in range(95):
eeprom_contents[15+i] = 1
"""
#
with open(eeprom_path, 'w') as eeprom_file:
eeprom_contents.write_hex_file(eeprom_file)
# External 16 MHz:
cmd_string = "avrdude -p m328p -c usbtiny -u -U hfuse:w:0xDE:m -U lfuse:w:0xBF:m -U efuse:w:0x05:m -U flash:w:%s -U eeprom:w:%s" % (
src_path, eeprom_path)
# internal 8 MHz:
#cmd_string = "avrdude -p m328p -c usbtiny -u -U hfuse:w:0xDE:m -U lfuse:w:0xA2:m -U efuse:w:0x05:m -U flash:w:%s -U eeprom:w:%s" % (src_path, eeprom_path)
os.system(cmd_string)
def flashEeprom(self):
do_flash = False
if "custom" in self.firmware.lower(
) or "extended" in self.firmware.lower():
from intelhex import IntelHex
eep_file = os.path.join(get_path("ROOT"), "eeprom.eep")
map_file = os.path.join(get_path("ROOT"), "%s.map" % self.firmware)
if not os.path.exists(map_file):
map_file = os.path.join(get_path("ROOT"),
"%s-default.map" % self.firmware)
if os.path.exists(map_file):
try:
with open(map_file, 'r') as f:
mappings = f.read().split("\n")
f.closed
except:
pass
if mappings:
ih = IntelHex()
i = 0
for line in mappings:
try:
ih[i] = int(line)
except:
ih[i] = 0
i += 1
eep = open(eep_file, 'w')
ih.write_hex_file(eep)
eep.close()
do_flash = True
return do_flash
def dump_state(filename, regs, content_chunks):
from intelhex import IntelHex
ih = IntelHex()
for base_addr, contents in content_chunks.items():
# print("Adding chunk of size 0x{:x}".format(len(contents)))
# f.write("0x{:08x} {}\n".format(base_addr, hexlify(contents.rstrip(b'\0')).decode()))
ih.puts(base_addr, contents)
with open(filename, "w") as f:
f.write("""r0=0x{:x}
r1=0x{:x}
r2=0x{:x}
r3=0x{:x}
r4=0x{:x}
r5=0x{:x}
r6=0x{:x}
r7=0x{:x}
r8=0x{:x}
r9=0x{:x}
r10=0x{:x}
r11=0x{:x}
r12=0x{:x}
lr=0x{:x}
pc=0x{:x}
sp=0x{:x}
xpsr=0x{:x}
""".format(*[regs[const] for const in uc_reg_consts]))
print("Writing ihex dump now...")
ih.write_hex_file(f)
def combine(out_file, startup_hex, bootloader_hex, firmware_hex, bin_out):
"""This command makes a firmare file for initial programming of a "clean"
defice. The firmware file is made by combining together the Start-up code,
the Bootloader, and, optionally, the Main Firmware.
"""
# Create initial firmware: begin with a HEX file of the Start-up code
out_ih = IntelHex(startup_hex)
# Read and process a HEX file of the Bootloader
bootloader_ih = IntelHex(bootloader_hex)
memmap = get_memmap(intelhex_to_bytes(bootloader_ih))
intelhex_add_icr(bootloader_ih, memmap['bootloader_size'])
out_ih.merge(bootloader_ih, overlap='ignore')
# Read and process a HEX file of the Main Firmware if specified
if firmware_hex:
main_ih = IntelHex(firmware_hex)
if main_ih.minaddr() != memmap['main_firmware_start']:
raise click.ClickException(
"Main Firmware is incomatible with the Bootloader")
intelhex_add_icr(main_ih, memmap['main_firmware_size'])
out_ih.merge(main_ih, overlap='ignore')
# Write resulting firmware in HEX or binary format
if bin_out:
file_obj = open(out_file, "wb")
file_obj.write(intelhex_to_bytes(out_ih))
file_obj.close()
else:
out_ih.write_hex_file(out_file)
def read2313Flash(self, file, size, linesize = 32):
iterations = round(size / 32)
hex = IntelHex()
data = []
for i in range(0, iterations):
print(self.set2313Addr(i))
datan = list(self.read2313Data(32))
data = data + datan
g0 = True
for i in range(0, size):
d = data[i]
g1 = False
g = (data[i] == 255)
for f in range(0, 8):
if (i + f) >= len(data):
break
if data[(i + f)] != 255:
g1 = True
break
if not g0:
g0 = not g
g1 = False
else:
g0 = g1
if not g:
g1 = True
if g1:
hex[i] = d
hex.write_hex_file(file, byte_count=linesize)
def flashEeprom(self):
do_flash = False
if "custom" in self.firmware.lower() or "extended" in self.firmware.lower():
from intelhex import IntelHex
eep_file = os.path.join(get_path("ROOT"), "eeprom.eep")
map_file = os.path.join(get_path("ROOT"), "%s.map" % self.firmware)
if not os.path.exists(map_file):
map_file = os.path.join(get_path("ROOT"), "%s-default.map" % self.firmware)
if os.path.exists(map_file):
try:
with open(map_file, 'r') as f: mappings = f.read().split("\n")
f.closed
except:
pass
if mappings:
ih = IntelHex()
i = 0
for line in mappings:
try: ih[i] = int(line)
except: ih[i] = 0
i +=1
eep = open(eep_file, 'w')
ih.write_hex_file(eep)
eep.close()
do_flash = True
return do_flash
def binary_hook(t_self, resources, _, binf):
"""Hook that merges the soft device with the bin file"""
# Scan to find the actual paths of soft device
sdf = None
for softdevice_and_offset_entry\
in t_self.target.EXPECTED_SOFTDEVICES_WITH_OFFSETS:
for hexf in resources.hex_files:
if hexf.find(softdevice_and_offset_entry['name']) != -1:
t_self.debug("SoftDevice file found %s."
% softdevice_and_offset_entry['name'])
sdf = hexf
if sdf is not None:
break
if sdf is not None:
break
if sdf is None:
t_self.debug("Hex file not found. Aborting.")
return
# Look for bootloader file that matches this soft device or bootloader
# override image
blf = None
if t_self.target.MERGE_BOOTLOADER is True:
for hexf in resources.hex_files:
if hexf.find(t_self.target.OVERRIDE_BOOTLOADER_FILENAME) != -1:
t_self.debug("Bootloader file found %s."
% t_self.target.OVERRIDE_BOOTLOADER_FILENAME)
blf = hexf
break
elif hexf.find(softdevice_and_offset_entry['boot']) != -1:
t_self.debug("Bootloader file found %s."
% softdevice_and_offset_entry['boot'])
blf = hexf
break
# Merge user code with softdevice
from intelhex import IntelHex
binh = IntelHex()
_, ext = os.path.splitext(binf)
if ext == ".hex":
binh.loadhex(binf)
elif ext == ".bin":
binh.loadbin(binf, softdevice_and_offset_entry['offset'])
if t_self.target.MERGE_SOFT_DEVICE is True:
t_self.debug("Merge SoftDevice file %s"
% softdevice_and_offset_entry['name'])
sdh = IntelHex(sdf)
binh.merge(sdh)
if t_self.target.MERGE_BOOTLOADER is True and blf is not None:
t_self.debug("Merge BootLoader file %s" % blf)
blh = IntelHex(blf)
binh.merge(blh)
with open(binf.replace(".bin", ".hex"), "w") as fileout:
binh.write_hex_file(fileout, write_start_addr=False)
def generate_provision_hex_file(s0_address, s1_address, hashes, provision_address, output):
# Add addresses
provision_data = struct.pack('III', s0_address, s1_address, len(hashes))
provision_data += b''.join(hashes)
ih = IntelHex()
ih.frombytes(provision_data, offset=provision_address)
ih.write_hex_file(output)
def post_process(self):
logging.info("Processing binaries")
# save original dir
cwd = os.getcwd()
# change to target dir
os.chdir(self.target_dir)
ih = IntelHex('main.hex')
fwid = uuid.UUID('{' + self.settings["FWID"] + '}')
size = ih.maxaddr() - ih.minaddr() + 1
# get os info
os_project = get_project_builder(self.settings["OS_PROJECT"])
# create firmware info structure
fw_info = struct.pack('<I16s128s16s128s16s',
size,
fwid.bytes,
os_project.proj_name,
os_project.version,
self.proj_name,
self.version)
# insert fw info into hex
ih.puts(0x120, fw_info)
# compute crc
crc_func = crcmod.predefined.mkCrcFun('crc-aug-ccitt')
crc = crc_func(ih.tobinstr())
logging.info("size: %d" % (size))
logging.info("fwid: %s" % (fwid))
logging.info("crc: 0x%x" % (crc))
logging.info("os name: %s" % (os_project.proj_name))
logging.info("os version: %s" % (os_project.version))
logging.info("app name: %s" % (self.proj_name))
logging.info("app version: %s" % (self.version))
ih.puts(ih.maxaddr() + 1, struct.pack('>H', crc))
ih.write_hex_file('main.hex')
ih.tobinfile('firmware.bin')
# get loader info
loader_project = get_project_builder(self.settings["LOADER_PROJECT"])
# create loader image
loader_hex = os.path.join(loader_project.target_dir, "main.hex")
self.merge_hex('main.hex', loader_hex, 'loader_image.hex')
# change back to original dir
os.chdir(cwd)
def tofile(self, outfile: Union[str, IO]) -> None:
ih = IntelHex()
ih.puts(self.base or 0, bytes(self.fw))
if Firmware._ishex(outfile):
if not isinstance(outfile, str):
outfile = io.TextIOWrapper(outfile)
ih.write_hex_file(outfile)
else:
ih.tobinfile(outfile)
def create_hex(filename, addr, auto_rst, automation_allowed,
overflow_detect, detect_incompatible_target, pad_size):
intel_hex = IntelHex()
intel_hex.puts(addr, struct.pack(FORMAT, CFG_KEY, FORMAT_LENGTH, auto_rst,
automation_allowed, overflow_detect, detect_incompatible_target))
pad_addr = addr + FORMAT_LENGTH
pad_byte_count = pad_size - (FORMAT_LENGTH % pad_size)
pad_data = '\xFF' * pad_byte_count
intel_hex.puts(pad_addr, pad_data)
intel_hex.write_hex_file(filename)
def generate_provision_hex_file(s0_address, s1_address, hashes, provision_address, output):
# Add addresses
provision_data = struct.pack('III', s0_address, s1_address, len(hashes))
for mhash in hashes:
provision_data += struct.pack('I', 0xFFFFFFFF) # Invalidation token
provision_data += mhash
ih = IntelHex()
ih.frombytes(provision_data, offset=provision_address)
ih.write_hex_file(output)
def to_eep_file(self, eep_file_name):
"""Save the configuration to an EEPROM-file."""
hex_file = IntelHex()
# Change any existing files instead of overwriting them.
if os.path.isfile(eep_file_name):
hex_file.fromfile(eep_file_name, format='hex')
data = self.to_bytes(crc=True)
hex_file.puts(Config.START_ADDRESS, data)
hex_file.write_hex_file(eep_file_name, byte_count=0x20)
def save_changes(self):
new_hex = IntelHex()
new_hex.fromdict(self.get_table_dict())
save_filename = QtGui.QFileDialog.getSaveFileName(self,
NAME+" - Save",
os.path.join(QtCore.QDir.home().path(), self.original_filename.replace(".hex", "_copy.hex")),
"Hex files (*.hex;;All Files (*)")
if save_filename:
new_hex.write_hex_file(save_filename[0])
def dump(self,file,start=0,stop=0xffff):
"""Dump an intel hex file from code memory."""
print "Dumping code from %04x to %04x as %s." % (start,stop,file);
h = IntelHex(None);
i=start;
while i<=stop:
h[i]=self.CCpeekcodebyte(i);
if(i%0x100==0):
print "Dumped %04x."%i;
h.write_hex_file(file); #buffer to disk.
i+=1;
h.write_hex_file(file);
def merge_hex_files(output, input_hex_files):
ih = IntelHex()
for hex_file_path in input_hex_files:
to_merge = IntelHex(hex_file_path)
# Since 'arm-none-eabi-objcopy' incorrectly inserts record type '03 - Start Segment Address', we need to remove
# the start_addr to avoid conflicts when merging.
to_merge.start_addr = None
ih.merge(to_merge)
ih.write_hex_file(output)
def main():
parser = argparse.ArgumentParser()
parser.add_argument("--output", required=True, type=pathlib.Path)
parser.add_argument("--ds_hex", required=True, type=pathlib.Path)
parser.add_argument("--xs_hex", required=True, type=pathlib.Path)
option = parser.parse_args()
ds_hex = IntelHex(str(option.ds_hex))
xs_hex = IntelHex(str(option.xs_hex))
ds_hex.merge(xs_hex)
ds_hex.write_hex_file(option.output)
def writetofile(self, fwname="out.hex", eename="out.eep"): ih = IntelHex() ih.start_address = 0x100000 for x in xrange(len(self.fw_data)): ih[x] = self.fw_data[x] ih.write_hex_file(fwname) ihe = IntelHex() ihe.start_address = 0x100000 for x in xrange(len(self.ee_data)): ihe[x] = self.ee_data[x] ihe.write_hex_file(eename) print "Name: %s FW Size: %d EE Size: %d Fuses %02x:%02x:%02x Lock %02x" % (self.h_name, self.h_fw_size, self.h_ee_size, self.h_f, self.h_fh, self.h_fe, self.h_lock)
def setUp(cls):
random.seed(420)
cls._bin_data = bytes([random.randint(0, 0xFF) for i in range(10000)])
ihex = IntelHex()
ihex.frombytes(cls._bin_data)
hex_data = io.StringIO()
ihex.write_hex_file(hex_data, write_start_addr=False)
cls._hex_data = codecs.encode(hex_data.getvalue(), encoding='ascii')
cls._args = [
'python3', 'qpsk/encoder.py', '-s', '48000', '-y', '6000', '-b',
'1K', '-f', '1K:40', '-a', '0', '-w', '10', '-p', '256'
]
def read(self, address, length, hex_file_path):
if ((int(length, 16) % 4) != 0):
print("ERROR: number of bytes must be a multiple of 4")
return NrfDfuErr.INVALID_PARAMETER
if (not self._quiet):
print("Reading %s bytes from address %s" % (length, address))
open(hex_file_path, 'w+')
ih = IntelHex(hex_file_path)
ih.__init__()
self.api.write_u32(0x2000000C, 0x00000004, True)
self.api.write_u32(0x20000010, int(address, 16), False)
self.api.write_u32(0x20000014, int(length, 16), False)
self.api.write_u32(0x4002A004, 0x00000001, False)
start_time = time.time()
event_received = False
while (event_received == False):
if ((time.time() - start_time) > 10):
print ("ERROR: Time out, no event received after 10 sec.")
return NrfDfuErr.TIME_OUT
return_value, event_received = self.get_event_status()
if return_value < 0:
return return_value
self.acknowlage_events()
return_value, modem_response = self.read_be(0x2000000C)
if (modem_response == "5a000001"):
print("\n\n ERROR: UNKNOWN COMMAND")
return NrfDfuErr.DFU_ERROR
elif (modem_response == "5a000002"):
print("\n\n ERROR: COMMAND ERROR")
error_result = self.api.read_u32(0x20000010)
print("ERROR: Read failed at {}".format(hex(error_result)))
return NrfDfuErr.DFU_ERROR
word_count = int(length, 16)//4
for i in range(0, word_count):
return_value, lelevel = self.hex_read(0x20000010+(i*4))
ih.puts(int(address,16)+(i*4), codecs.decode(lelevel, "hex"))
ih.write_hex_file(hex_file_path)
if (not self._quiet):
print ("Reading completed")
return NrfDfuErr.SUCCESS
def dump(self,file,start=0,stop=0xffff):
"""Dump an intel hex file from code memory."""
print "Dumping code from %04x to %04x as %s." % (start,stop,file);
h = IntelHex(None);
i=start;
while i<=stop:
h[i]=self.CCpeekcodebyte(i);
if(i%0x100==0):
print "Dumped %04x."%i;
h.write_hex_file(file); #buffer to disk.
i+=1;
h.write_hex_file(file);
def to_hex(self, f):
'''
Convert the assembled machine code to Intel HEX file format.
:param f: The HEX data will be written to this destination.
:type f: filename or file-like object
'''
from intelhex import IntelHex
ih = IntelHex()
for addr, val in self.accumulator.iteritems():
addr = int(addr, 16)
ih.puts(addr, val)
ih.write_hex_file(f)
def save_changes(self):
new_hex = IntelHex()
new_hex.fromdict(self.get_table_dict())
save_filename = QtGui.QFileDialog.getSaveFileName(
self, NAME + " - Save",
os.path.join(QtCore.QDir.home().path(),
self.original_filename.replace(".hex", "_copy.hex")),
"Hex files (*.hex;;All Files (*)")
if save_filename:
new_hex.write_hex_file(save_filename[0])
def generate_test_hexfile(filename, size):
"""
Generates a random hex file
:param filename: location and name to generate
:param size: number of bytes of data
"""
hexfile = IntelHex()
# Add some data to the hexfile
for i in range(size):
hexfile[i] = randint(0, 255)
# Turn the hexfile object into an actual file
hexfile.write_hex_file(filename)
def main(args: argparse.Namespace):
brtype = args.branch_type
hexfile = args.hexfile
# Pad a numeric string with zeros
brtype = brtype.zfill(BRANCH_TYPE_BYTES * 2)
# Split string data into bytes (e.g. "AABBCCDD" -> b'\xaa\xbb\xcc\xdd'
bytes_brtype = bytes.fromhex(brtype)
'''
# for debug
print("bytes_brtype=", end='')
print(bytes_brtype)
'''
ih = IntelHex()
# Write out user defined data
global csvFilePath
csvFilePath = args.user_data
if csvFilePath is not None:
# if csvFilePath is given
if os.path.exists(csvFilePath):
with open(csvFilePath, 'r') as fp:
csvList = list(csv.reader(fp))
if len(csvList) > 0:
print("csvList has some contents")
flatList = [item for subList in csvList for item in subList]
print(flatList)
bytes_data = strlist_to_bytes(flatList)
if len(bytes_data) > 0:
ih.puts(USER_DATA_ADDR, bytes_data)
else:
print(csvFilePath + " is empty")
ErrorMsg()
else:
print(csvFilePath + " not found. Skip user defined EEPROM data flash.")
print()
else:
print("Skip user defined EEPROM data flash.")
print()
# Write out branchType
ih.puts(SYSTEM_RESERVED_ADDR, bytes_brtype)
hex_file_name = os.path.join(os.path.dirname(os.path.abspath(__file__)), hexfile)
ih.dump()
ih.write_hex_file(hex_file_name)
def write_eeprom_file(eeprom, eep_file="map.eep"):
from intelhex import IntelHex
ih = IntelHex()
i = 0
for byte in eeprom:
try:
ih[i] = int(byte)
except:
ih[i] = 0
i += 1
eep = open(eep_file, 'w')
ih.write_hex_file(eep)
eep.close()
print "EEPROM written to file: %s" % eep_file
def main(file, append, port, baud):
"""
Receive a code file from an attached ELF with MAX binary sender.
The program reads a MAX-format binary file from the specified
serial port and stores in the given file.
"""
class State(Enum):
DATA = auto()
ESCAPE = auto()
ADDR_HI = auto()
ADDR_LO = auto()
DONE = auto()
state = State.DATA
address = 0
intel_hex = IntelHex()
if append:
intel_hex.loadhex(file)
with serial.serial_for_url(port) as ser:
ser.baudrate = baud
ser.write(constants.START_RECV)
while state != State.DONE:
data = ser.read(ser.in_waiting)
for byte in data:
if state == State.DATA:
if byte == constants.ESCAPE:
state = State.ESCAPE
elif byte == constants.END_OF_FILE:
state = State.DONE
elif byte == constants.NEW_ADDRESS:
state = State.ADDR_HI
else:
intel_hex[address] = byte
address += 1
elif state == State.ESCAPE:
intel_hex[address] = byte ^ 0x20
address += 1
state = State.DATA
elif state == State.ADDR_HI:
address = byte << 8
state = State.ADDR_LO
elif state == State.ADDR_LO:
address |= byte
state = State.DATA
intel_hex.write_hex_file(file)
def patch_file(in_file, out_file, hex_file):
with open(in_file, 'rb') as i:
data = i.read()
padding = bytes([0xFF])
data = data.ljust(BL_SIZE, padding)
data = patch_data(data)
with open(out_file, 'wb') as df:
df.write(data)
if len(hex_file) > 0:
from intelhex import IntelHex
out = IntelHex()
out.frombytes(data, offset=BL_START)
out.write_hex_file(hex_file)
def to_hex(self, filename, offset):
ih = IntelHex()
# Cycles and command numbers
ih[offset] = self.__cycles_number // 256
ih[offset + 1] = self.__cycles_number % 256
ih[offset + 2] = self.cmd_number()
offset += 3
# Commands
for cmd in self.__commands:
offset = self.__cmd_to_hex(cmd, ih, offset)
ih.write_hex_file(filename)
class HexTruth: #Class which takes a dict or CSV file and converts it into an Intel Hex file for ROM burning.
def __init__(self, csvFilename, loadDict = None, hexFilename=None ):
if hexFilename is None: hexFilename = csvFilename.split(".")[0]+ ".hex"
self.csvFilename = csvFilename
self.hexFilename = hexFilename
self.ih= IntelHex()
self.hexDict = {};
if loadDict is not None:
self.hexDict = loadDict
self.ih.fromdict(loadDict)
self.writeFromIntelHex()
def writeFromIntelHex(self): #Takes the IntelHex object and writes it to a hex file.
f = open(self.hexFilename, 'w');
self.ih.write_hex_file(f)
f.close()
print("Hex file generated.")
def importCSV(self): #Opens a given csv filename and returns it's values as a list of lists.
#list of lists = rows of columns
self.csvTruth = []
with open(self.csvFilename, newline='') as csvfile:
csvReadingMachine = csv.reader(csvfile, delimiter=',', quotechar='"')
for row in csvReadingMachine:
self.csvTruth.append(row)
if "#" in str(row):continue
[addr, dat] = str(row).split("''")
rangeIn = [0, addr.count(',') -1]
if dat.count(",") is 1: rangeOut = [rangeIn[-1] + 2]
else:rangeOut = [rangeIn[-1] + 2, rangeIn[-1] + 1 + dat.count(",")]
binaryString = ""
for j in range(rangeIn[0], rangeIn[-1] + 1):
binaryString+=str(row[j])
#address = binaryString
address = (int(binaryString,2))
binaryString = ""
for j in range(rangeOut[0], rangeOut[-1] + 1):
binaryString+=str(row[j])
#data = binaryString;
data = (int(binaryString,2))
#print(str(address) + ":" + str(data))
self.hexDict[address] = data
#print(row)
return self.hexDict
def createHexWithPagePositions(lastOffset): tmp=open(bin_dir+program_name+"_privateData.hex","w+"); ih=IntelHex(); num_pages= floor(float(lastOffset)/float(PAGE_SIZE)); initPosition=0; counterEPROM=initPosition; i=0; while i < num_pages*PAGE_SIZE: first=(i & 0xFF00)>>8; second=(i & 0x00FF); # LITTLE ENDIAN ih[counterEPROM]=second; ih[counterEPROM+1]=first; i+=PAGE_SIZE; counterEPROM+=2; print; ih.write_hex_file(tmp);
def main(arguments):
# If using ANSI coloring is available, initialize colorama
if fail_color:
init()
# Import intelhex if avaialable, otherwise fail
try:
from intelhex import IntelHex
except:
return fail('error: You do not have \'intelhex\' installed. Please run \'pip install intelhex\' then retry.')
# Ensure the right number of arguments are supplied
if not len(arguments) == 3:
return fail('error: Improper use of merge_hex.py.\nUSAGE: merge_hex.py input_file1 input_file2 output_file.')
# Get the two hex files, merge them, and save the result
orig = IntelHex(arguments[0])
new = IntelHex(arguments[1])
orig.merge(new, overlap='replace')
orig.write_hex_file(arguments[2])
def create(ds_address,
app_address,
script_file):
bl_scr = bl_script(1)
bl_scr.cmd_app_handshake()
bl_scr.cmd_sd_init(app_address)
bl_scr.cmd_exec(app_address)
scrdata = bl_scr.get()
scrdata = bl_script.page_start(scrdata)
scrdata = bl_script.page_stop(scrdata)
ih = IntelHex()
for i in range(len(scrdata)):
ih[ds_address + i] = scrdata[i]
with open(script_file, 'w') as out_file:
ih.write_hex_file(out_file)
click.echo("Created default page hex file %s with address: %s and app start address %s " %
(script_file, hex(ds_address), hex(app_address)))
def dump(self, fn, start=0, stop=0xFFFFFFFF):
"""Dump an intel hex file from code memory."""
print "Dumping from %04x to %04x as %s." % (start, stop, f)
# FIXME: get mcu state and return it to that state
self.halt()
h = IntelHex(None)
i = start
while i <= stop:
data = self.ARMreadChunk(i, 48, verbose=0)
print "Dumped %06x." % i
for dword in data:
if i <= stop and dword != 0xDEADBEEF:
h.puts(i, struct.pack("<I", dword))
i += 4
# FIXME: get mcu state and return it to that state
self.resume()
h.write_hex_file(fn)
print "Dump not implemented."
def dump(self,fn,start=0,stop=0xffffffff):
"""Dump an intel hex file from code memory."""
print "Dumping from %04x to %04x as %s." % (start,stop,f);
# FIXME: get mcu state and return it to that state
self.halt()
print "halted, starting the dump"
h = IntelHex(None);
i=start;
while i<=stop:
data=self.ARMreadChunk(i, 48, verbose=0);
print "Dumped %06x."%i;
for dword in data:
if i<=stop and dword != 0xdeadbeef:
h.puts( i, struct.pack("<I", dword) )
i+=4;
# FIXME: get mcu state and return it to that state
self.resume()
h.write_hex_file(fn);
print "Dump not implemented.";
def encrypt(): tmp=open(bootloader_dir+bootloaderName+"_encrypted.hex","w+"); ih=IntelHex(bootloader_dir+bootloaderName+".hex"); keyPos=0; dictionary=ih.todict(); addresses=dictionary.keys(); pages=-1; for b in addresses: #print hex(p)+":"+hex(dictionary[p]); if (b!="start_addr") and b>=initAddr and b<endAddr: #print b,hex(b); if (b%PAGE_SIZE)==0: pages=pages+1; keyPos=0 print; print; print "PAGE ",pages; print hex(b)+":"+hex(dictionary[b])+"^"+hex(key[keyPos])+"=", dictionary[b]=dictionary[b]^key[keyPos] print hex(dictionary[b])+" ", keyPos=keyPos+1; ih.fromdict(dictionary); ih.write_hex_file(tmp);
# Sanity checks, very important
if ih.maxaddr() < 0x1004 or ih.maxaddr() > 32767:
print "Insane hexfile: min=0x%x max=0x%x" % (ih.minaddr(), ih.maxaddr())
sys.exit(2)
print "Length: %d / 28672" % (ih.maxaddr() - 4096 + 1)
print "Free: %d" % (28672 - (ih.maxaddr() - 4096 + 1))
# Hack to force tobinstr() to write data from addres 0. IntelHex will
# only write data from the first location with initialized data, skipping
# over any uninitialized data beforehand. This initializes address 0,
# forcing IntelHex to do what I want.
ih[0]=ih[0]
sumdata = (ih.tobinstr())[0x1004:]
sumdata += '\xff' * (0x6ffc - len(sumdata))
cksum = binascii.crc32(sumdata) & 0xffffffff
print "Checksum: 0x%08x" % cksum
ih.puts(0x1000, struct.pack('<L', cksum))
# Rather than using IntelHex.tobinfile(), i'm writing to a file this way
# to ensure that the file ends up at exactly 32768 bytes.
binfw = ih.tobinstr()
binfw += '\xff' * (0x8000 - len(binfw))
out.write(binfw)
out.close()
# Testing only.
a=IntelHex()
a.loadbin(sys.argv[2])
a.write_hex_file(sys.argv[2] + '.hex')
if not os.path.exists(sys.argv[2]):
sys.exit("Unable open build %s" % sys.argv[2])
build_filename = sys.argv[1]
prog_filename = sys.argv[2]
# open the build and prog
# note open build via StringIO so we can add to it
build = IntelHex(StringIO.StringIO(open(build_filename, "r").read()))
prog = IntelHex(prog_filename)
# merge program into build
prog_header_addr = prog.minaddr()
prog.start_addr = build.start_addr # we need this to make the merge work smoothly
build.merge(prog)
# add pointer to program header to the bootstrap
header_tbl_addr = 0x08000204
header_tbl_len = 2 #@todo get this from 0x0800200 as uint32_t
header_tbl_format = "<LL"
header_tbl = list(struct.unpack(header_tbl_format, build.gets(header_tbl_addr, header_tbl_len * 4)))
k = 0
while header_tbl[k] != 0xffffffff:
if k > header_tbl_len:
sys.exit("bootstrap program table full [you have too many programs]!");
k += 1
header_tbl[k] = prog_header_addr
build.puts(header_tbl_addr, struct.pack(header_tbl_format, *header_tbl))
# done
build.write_hex_file(build_filename)
if modf(chan)[0] != 0.0:
print "Illegal freq/spacing combo"
sys.exit(2)
chan = int(chan)
# First create the data without the checksum, note that we specify
# little-endianness for multi-byte values.
t = pack('<BBBHB8x', band, demphasis, spacing, chan, volume)
# Calculate and append a crc-16 checksum
crc16 = Crc('crc-16')
crc16.update(t)
t = t + pack('<H', crc16.crcValue)
#
# Simply create a hex file with the concatenation of two tuning structures (t)
# and optionally one manufacturing structure, then write the result.
#
eeprom = t + t
if manuf:
eeprom = eeprom + manuf_record(sn, ts, campaign)
hexfile = IntelHex()
hexfile.puts(0, eeprom)
hexfile.write_hex_file(outfile)
def get_hex(f, b, d, cs):
#
# All the following to be able to be set with getopt.
# These defaults will do for testing purposes.
#
outfile=sys.stdout
# manufacturing data
#
manuf=False
sn=""
ts=""
campaign=""
eyecatcher='The Public Radio'
# tuning info defaults
#
freq=0.0
band=0 # US 87.5 - 108
demphasis=0 # US 75uS
spacing=0 # US 200KHz
volume=0x0f # max (0 dBFS)
#
# Create a manufacturing record.
#
def manuf_record(sn, ts, campaign):
ww = int(date.today().strftime('%V'))
yy = int(date.today().strftime('%g'))
return pack('17sBB2s13s17s', sn[:16], ww, yy, ts[:2], campaign[:12], eyecatcher)
#
# calculate channel # based on freq, band & channel spacing.
# Note that we force the floating point arithmetic to round
# to a reasonable number of digits in order to avoid daft problems.
freq = float(f)
band = int(b)
demphasis = int(d)
spacing= int(cs)
base = {0: 87.5, 1: 76, 2: 76}
step = {0: 5, 1: 10, 2: 20}
try:
chan = round((freq - base[band]) * step[spacing], 4)
except:
chan = round((freq - base[0]) * step[0], 4)
if modf(chan)[0] != 0.0:
chan = 0
chan = int(chan)
# First create the data without the checksum, note that we specify
# little-endianness for multi-byte values.
t = pack('<BBBHB8x', band, demphasis, spacing, chan, volume)
# Calculate and append a crc-16 checksum
crc16 = crcmod.predefined.Crc('crc-16')
crc16.update(t)
t = t + pack('<H', crc16.crcValue)
#
# Simply create a hex file with the concatenation of two tuning structures (t)
# and optionally one manufacturing structure, then write the result.
#
eeprom = t + t
if manuf:
eeprom = eeprom + manuf_record(sn, ts, campaign)
outfile = tempfile.NamedTemporaryFile(prefix='eeprom.', suffix='.hex', delete=False)
hexfile = IntelHex()
hexfile.puts(0, eeprom)
hexfile.write_hex_file(outfile)
outfile.close()
return outfile
import sys
from intelhex import IntelHex
WRITEBACK = True
if len(sys.argv) > 1:
WRITEBACK = False
ser = int(sys.argv[1])
else:
try:
ser = int(file(".serial", "rb").read(), 16) + 1
except IOError:
ser = 0
print >>sys.stderr, ("[--- new serial number: %.4x ---]" % ser)
if WRITEBACK:
file(".serial", "wb").write("%.13x" % ser)
sertxt = ""
sertmp = "%.13x" % ser
for c in sertmp:
sertxt += "%s\x00" % c
ihc = IntelHex("CCBootloader/CCBootloader-rfcat-chronosdongle.hex")
ihd = IntelHex("CCBootloader/CCBootloader-rfcat-donsdongle.hex")
ihc.puts(0x13E0, "@las\x1c\x03" + sertxt)
ihd.puts(0x13E0, "@las\x1c\x03" + sertxt)
ihc.write_hex_file("CCBootloader/CCBootloader-rfcat-chronosdongle-serial.hex")
ihd.write_hex_file("CCBootloader/CCBootloader-rfcat-donsdongle-serial.hex")
model, version, subversion, litera, assmcode =\
struct.unpack_from('<HHHcB', code, ver_data_offset)
ver = str(model) + '.' + str(version) + '.' + str(subversion) + '.' + litera + '-' + str(assmcode)
print 'Extracted version data:', ver
print 'Merging bootloader file...',
ih.start_addr = None # program start addr record will be from BL part
try:
ih.merge(blih, overlap='error')
print 'Ok'
except AddressOverlapError:
print ' probably already merged, data overlap! CHECK THIS!'
finally:
hx_fn = 'DKSF_' + ver + '_HX.hex'
print 'Writing', hx_fn, '...',
ih.write_hex_file(hx_fn)
print 'Ok'
npf = ''
npf += fwstart
npf += code
npf += fwend
npf += resstart
npf += res
npf += resend
npf += jsstart
npf += """function fw_is_updated(v) { return v == 'v%d.%d.%d.%c-%d'; }
""" % (model, version, subversion, litera.upper(), assmcode)
npf += """function fw_is_compatible() { return fwver.split('.')[0] == 'v%d'; }
mergedHex.puts(metaAddr, meta)
#production image only calculates over imgA region
if vargs.oadtype == 'onchip' and vargs.imgtype == 'production':
asBin = mergedHex.tobinstr(INT_FL_OAD_IMG_A_META_BEGIN, INT_FL_OAD_IMG_A_END)
else:
asBin = mergedHex.tobinstr(startAddr, endAddr-1)
crc = crc16(asBin[4:])
mergedHex.puts(metaAddr, struct.pack('H', crc))
metaVector = [crc, crcShdw, imgVer, imgLen, usrId, imgAddr, imgType, META_STATUS_SUCCESS]
print_metadata(metaVector)
#mergedHex.puts(metaAddr, struct.pack('B', 0xff)*16)
# Output merged hex file unless both hex and bin is stdout, in which case bin wins
if not (vargs.out is sys.stdout and vargs.outbin is sys.stdout):
print("Writing to:\n", vargs.out.name)
mergedHex.write_hex_file(vargs.out)
vargs.out.flush()
# Output binary
if vargs.outbin is not None:
print("Writing to:\n", vargs.outbin.name)
for ch in mergedHex.tobinstr(startAddr, endAddr-1):
vargs.outbin.write(ch)
vargs.outbin.flush()
print("******************************************************************************************")
print("Success")
print("******************************************************************************************")
ext_item_value = struct.pack('<L', int(args.ext_info[0], 16))
write_hex_entry(ih, ext_item_value, GBOOT_EXT_INFO_OFFSET)
if args.mcu:
print '==> info: update MCU item at offset 0x%04x' % (GBOOT_MCU_OFFSET)
mcu_value = struct.pack('<H', int(args.mcu[0], 16))
write_hex_entry(ih, mcu_value, GBOOT_MCU_OFFSET)
if args.pcb_rev:
print '==> info: update PCB revision item at offset 0x%04x' % (GBOOT_PCB_REV_OFFSET)
pcb_rev_value = struct.pack('<B', int(args.pcb_rev[0], 16))
write_hex_entry(ih, pcb_rev_value, GBOOT_PCB_REV_OFFSET)
if args.pid:
print '==> info: update USB PID item at offset 0x%04x' % (GBOOT_PID_OFFSET)
pid_value = struct.pack('<H', int(args.pid[0], 16))
write_hex_entry(ih, pid_value, GBOOT_PID_OFFSET)
if args.serial:
print '==> info: update Serial ID item at offset 0x%04x' % (GBOOT_SERIAL_OFFSET)
serial_value = struct.pack('<L', int(args.serial[0], 16))
write_hex_entry(ih, serial_value, GBOOT_SERIAL_OFFSET)
if args.version:
print '==> info: update Version item at offset 0x%04x' % (GBOOT_VER_OFFSET)
version_value = struct.pack('<B', int(args.version[0], 16))
write_hex_entry(ih, version_value, GBOOT_VER_OFFSET)
print '==> info: finished updating gboot bootload image'
ih.write_hex_file(args.hex_file[0])
def arm9_cli_handler(client, argv):
if(argv[1]=="info"):
client.halt()
print >>sys.stderr, client.ARMidentstr()
print >>sys.stderr,"Debug Status:\t%s" % client.statusstr()
print >>sys.stderr,"CPSR: (%s) %s\n"%(client.ARMget_regCPSRstr())
client.resume()
if(argv[1]=="dump"):
f = sys.argv[2]
start=0x00000000
stop=0xFFFFFFFF
if(len(sys.argv)>3):
start=int(sys.argv[3],16)
if(len(sys.argv)>4):
stop=int(sys.argv[4],16)
print "Dumping from %04x to %04x as %s." % (start,stop,f)
#h = IntelHex16bit(None)
# FIXME: get mcu state and return it to that state
client.halt()
try:
h = IntelHex(None)
i=start
while i<=stop:
#data=client.ARMreadMem(i, 48)
data=client.ARMreadChunk(i, 48, verbose=0)
print "Dumped %06x."%i
for dword in data:
if i<=stop and dword != 0xdeadbeef:
h.puts( i, struct.pack("<I", dword) )
i+=4
# FIXME: get mcu state and return it to that state
except:
print "Unknown error during read. Writing results to output file."
print "Rename file with last address dumped %06x."%i
pass
client.resume()
h.write_hex_file(f)
'''
if(sys.argv[1]=="erase"):
print "Erasing main flash memory."
client.ARMmasserase()
if(sys.argv[1]=="eraseinfo"):
print "Erasing info memory."
client.ARMinfoerase()
'''
if(sys.argv[1]=="ivt"):
client.halt()
client.ARMprintChunk(0x0,0x20)
client.resume()
if(sys.argv[1]=="regs"):
client.halt()
for i in range(0,16):
print "r%i=%04x" % (i,client.ARMget_register(i))
client.resume()
if(sys.argv[1]=="flash"):
f=sys.argv[2]
start=0
stop=0x10000
if(len(sys.argv)>3):
start=int(sys.argv[3],16)
if(len(sys.argv)>4):
stop=int(sys.argv[4],16)
client.halt()
h = IntelHex16bit(f)
#Should this be default?
#Makes flashing multiple images inconvenient.
#client.ARMmasserase()
count=0; #Bytes in commit.
first=0
vals=[]
last=0; #Last address committed.
for i in h._buf.keys():
if((count>0x40 or last+2!=i) and count>0 and i&1==0):
#print "%i, %x, %x" % (len(vals), last, i)
client.ARMpokeflashblock(first,vals)
count=0
first=0
last=0
vals=[]
if(i>=start and i<stop and i&1==0):
val=h[i>>1]
if(count==0):
first=i
last=i
count+=2
vals+=[val&0xff,(val&0xff00)>>8]
if(i%0x100==0):
print "%04x" % i
if count>0: #last commit, ivt
client.ARMpokeflashblock(first,vals)
client.resume()
if(sys.argv[1]=="verify"):
f=sys.argv[2]
start=0
stop=0xFFFF
if(len(sys.argv)>3):
start=int(sys.argv[3],16)
if(len(sys.argv)>4):
stop=int(sys.argv[4],16)
client.halt()
h = IntelHex16bit(f)
for i in h._buf.keys():
if(i>=start and i<stop and i&1==0):
peek=client.peek(i)
if(h[i>>1]!=peek):
print "ERROR at %04x, found %04x not %04x"%(i,peek,h[i>>1])
if(i%0x100==0):
print "%04x" % i
client.resume()
if(sys.argv[1]=="peek"):
start = 0x0000
if(len(sys.argv)>2):
start=int(sys.argv[2],16)
stop = start+4
if(len(sys.argv)>3):
stop=int(sys.argv[3],16)
print "Peeking from %04x to %04x." % (start,stop)
client.halt()
for dword in client.ARMreadChunk(start, (stop-start)/4, verbose=0):
print "%.4x: %.8x" % (start, dword)
start += 4
client.resume()
if(sys.argv[1]=="poke"):
start=0x0000
val=0x00
if(len(sys.argv)>2):
start=int(sys.argv[2],16)
if(len(sys.argv)>3):
val=int(sys.argv[3],16)
print "Poking %06x to become %04x." % (start,val)
client.halt()
#???while client.ARMreadMem(start)[0]&(~val)>0:
client.ARMwriteChunk(start, [val])
print "Poked to %.8x" % client.ARMreadMem(start)[0]
client.resume()
if(sys.argv[1]=="reset"):
#Set PC to RESET vector's value.
#client.ARMsetPC(0x00000000)
#client.ARMset_regCPSR(0)
#client.ARMreleasecpu()
client.ARMresettarget(1000)
def generateNewHex():
tmp=open(bin_dir+program_name+"_modified.hex","w+");
ih=IntelHex(bin_dir+program_name+".hex");
binary=ih.tobinarray();
for p in pointers:
if 'rjmp' in p:
offset=int(p.split(":")[1],16);
destination=p.split(":")[3];
binary.pop(offset);
binary.pop(offset);
insertOpcodeJMP(destination,offset,binary);
elif 'jmp' in p:
offset=int(p.split(":")[1],16);
destination=p.split(":")[3];
binary.pop(offset);
binary.pop(offset);
binary.pop(offset);
binary.pop(offset);
insertOpcodeJMP(destination,offset,binary);
elif 'rcall' in p:
offset=int(p.split(":")[1],16);
destination=p.split(":")[3];
binary.pop(offset);
binary.pop(offset);
insertOpcodeCALL(destination,offset,binary);
elif 'call' in p:
offset=int(p.split(":")[1],16);
destination=p.split(":")[3];
binary.pop(offset);
binary.pop(offset);
binary.pop(offset);
binary.pop(offset);
insertOpcodeCALL(destination,offset,binary);
elif 'br' in p:
offset=int(p.split(":")[1],16);
destination=p.split(":")[3];
opcode=p.split(":")[4];
binary.pop(offset);
binary.pop(offset);
insertOpcodeBR(destination,offset,binary,opcode);
elif 'nop' in p:
offset=int(p.split(":")[1],16);
binary.insert(offset,0x00);
binary.insert(offset+1,0x00);
elif 'jump_link' in p:
offset=int(p.split(":")[1],16);
destination=p.split(":")[3];
insertOpcodeJMP(destination,offset,binary);
elif 'global_ctors' in p:
offset=int(p.split(":")[1],16);
destination=p.split(":")[3];
binary.pop(offset);
binary.pop(offset);
insertOpcodeGLOBAL_CTORS(destination,offset,binary);
elif 'vpointer' in p:
offset=int(p.split(":")[1],16)-0x800000-0x100+offsetDataInSRAM;
destination=p.split(":")[3];
binary.pop(offset);
binary.pop(offset);
insertOpcodeVPointers(destination,offset,binary);
elif 'ldi_data_offset' in p:
offset=int(p.split(":")[1],16);
destination=p.split(":")[3];
binary.pop(offset);
binary.pop(offset);
binary.pop(offset);
binary.pop(offset);
insertOpcodeLDI_destination(destination,offset,binary);
elif 'prologues' in p:
offset=int(p.split(":")[1],16);
destination=p.split(":")[3];
ad=destination.split("0x")[1];
while (len(ad)<4):
ad='0'+ad;
pc=address2pc(int(ad[0:2],16),int(ad[2:4],16));
destination="0x"+h(pc)+l(pc);
binary.pop(offset);
binary.pop(offset);
binary.pop(offset);
binary.pop(offset);
insertOpcodeLDI_destination(destination,offset,binary);
ih.frombytes(binary);
ih.write_hex_file(tmp);
header_addr = prog.minaddr() # all programs require there header to be located at the start # read out the header header = ih2header(prog) # optional updates if args.pid != None and args.pid >= 0 and args.pid < 256: header['pid'] = args.pid if args.key != None: header['key'] = args.key if args.hw != None: header['hw_id'] = args.hw # update the header len l = prog.maxaddr() - prog.minaddr() + 1 header['len'] = l prog = header2ih(prog, header) # put the length back into the intel hex file for crc # update the header crc (note we do no include the CRC word in the CRC) crc_start_addr = prog.minaddr() + 4 prog.padding = 0xff buf = prog.tobinstr(start=crc_start_addr) crc.crc_init(crc.stm32f10x_crc_h) crc = crc.crc_buf(crc.stm32f10x_crc_h, buf, len(buf)) & 0xffffffff header['crc'] = crc prog = header2ih(prog, header) # put the crc back into the intel hex file so we can write it out # write header back to hex file prog.write_hex_file(sys.stdout)
def merge_hex(self, hex1, hex2, target):
ih = IntelHex(hex1)
ih.merge(IntelHex(hex2))
ih.write_hex_file(target)