def spinDownTest(self):
# OK, we have collected the number of requested getEvents, that have returned >0 events
# so _close psychopy window
self.psychoWindow.close()
# disable high priority in both processes
Computer.disableHighPriority()
def disableHighPriority(self):
Computer.disableHighPriority()
def runBlockSet(self, blockSet):
# using getDevice() returns None if the device is not found,
tracker = self.hub.getDevice("tracker")
daq = self.hub.getDevice("daq")
# using self.devices.xxxxx raises an exception if the
# device is not present
kb = self.devices.kb
display = self.devices.display
# for each block in the group of blocks.....
for trialSet in blockSet.getNextConditionSet():
# if an eye tracker is connected,
if tracker:
self.instructionScreen.setTimeout(30 * 60.0) # 30 minute timeout, long enough for a break if needed.
dtrigger = DeviceEventTrigger(kb, EventConstants.KEYBOARD_PRESS, {"key": ["RETURN", "ESCAPE"]})
self.instructionScreen.setEventTriggers(dtrigger)
self.instructionScreen.setText(
"Press 'Enter' to go to eye tracker Calibration mode.\n\nTo skip calibration and start Data Recording press 'Escape'"
)
flip_time, time_since_flip, event = self.instructionScreen.switchTo(msg="CALIBRATION_SELECT")
if event and event.key == "RETURN":
runEyeTrackerSetupAndCalibration(tracker, self.window)
elif event and event.key == "ESCAPE":
print "** Calibration stage skipped for block ", blockSet.getCurrentConditionSetIteration()
else:
print "** Time out occurred. Entering calibration mode to play it safe. ;)"
runEyeTrackerSetupAndCalibration(tracker, self.window)
dres = display.getPixelResolution()
# right now, target positions are automatically generated based on point grid size, screen size, and a scaling factor (a gain).
TARGET_POSITIONS = generatedPointGrid(
dres[0], dres[1], self.HORZ_SCALING, self.VERT_SCALING, self.HORZ_POS_COUNT, self.VERT_POS_COUNT
)
# indexes to display the condition variable order in start out 'non' randomized.
RAND_INDEXES = np.arange(TARGET_POSITIONS.shape[0])
# if conditionVariablesProvider was told to randomize trials, then randomize trial index access list.
if self.conditionVariablesProvider.randomizeTrials is True:
self.hub.sendMessageEvent(
"RAND SEED = {0}".format(ExperimentVariableProvider._randomGeneratorSeed),
sec_time=ExperimentVariableProvider._randomGeneratorSeed / 1000.0,
)
np.random.shuffle(RAND_INDEXES)
dtrigger = DeviceEventTrigger(kb, EventConstants.KEYBOARD_PRESS, {"key": "SPACE"})
self.instructionScreen.setEventTriggers(dtrigger)
self.instructionScreen.setText(
"Press 'Space' key when Ready to Start Block %d" % (blockSet.getCurrentConditionSetIteration())
)
flip_time, time_since_flip, event = self.instructionScreen.switchTo(msg="BLOCK_START")
# enable high priority for the experiment process only. Not sure this is necessary, or a good idea,
# based on tests so far frankly. Running at std priority seems to usually be just fine.
Computer.enableRealTimePriority(True)
# if we have a tracker, start recording.......
if tracker:
tracker.setRecordingState(True)
# delay a short time to let " the data start flow'in "
self.hub.wait(0.050)
# In this paradigm, each 'trial' is the movement from one target location to another.
# Recording of eye data is on for the whole block of XxY target positions within the block.
# A rough outline of the runtime / data collection portion of a block is as follows:
# a) Start each block with the target at screen center.
# b) Wait sec.msec duration after showing the target [ column PRE_POS_CHANGE_INTERVAL ] in excel file
# c) Then schedule move of target to next target position at the time of the next retrace.
# d) Once the Target has moved to the 2nd position for the trial, wait PRE_COLOR_CHANGE_INTERVAL
# sec.msec before 'possibly changing the color of the center of the target. The new color is
# determined by the FP_INNER_COLOR2 column. If no color change is wanted, simply make this color
# equal to the color of the target center in column FP_INNER_COLOR for that row of the spreadsheet.
# e) Once the target has been redrawn (either with or without a color change, it stays in position for
# another POST_COLOR_CHANGE_INTERVAL sec.msec. Since ioHub is being used, all keyboard activity
# is being recorded to the ioDataStore file, so there is no need really to 'monitor' for
# the participants key presses, since we do not use it for feedback. It can be retrieved from the
# data file for analysis post hoc.
# f) After the POST_COLOR_CHANGE_INTERVAL, the current 'trial' officially ends, and the next trial
# starts, with the target remaining in the position it was at in the end of the last trial, but
# with the target center color switching to FP_INNER_COLOR.
# g) Then the sequence from b) starts again for the number of target positions in the block
# (49 currently).
#
self.hub.clearEvents("all")
self._TRIAL_STATE = None
self.targetScreen.nextAreaOfInterest = None
for trial in trialSet.getNextConditionSet():
currentTrialIndex = trialSet.getCurrentConditionSetIndex()
nextTargetPosition = TARGET_POSITIONS[currentTrialIndex]
trial["FP_X"] = nextTargetPosition[0]
trial["FP_Y"] = nextTargetPosition[1]
ppd_x, ppd_y = self.devices.display.getPixelsPerDegree()
fp_outer_radius = int(trial["FP_OUTER_RADIUS"] * ppd_x), int(trial["FP_OUTER_RADIUS"] * ppd_y)
fp_inner_radius = int(trial["FP_INNER_RADIUS"] * ppd_x), int(trial["FP_INNER_RADIUS"] * ppd_y)
self.targetScreen.setScreenColor(tuple(trial["SCREEN_COLOR"]))
self.targetScreen.setTargetOuterColor(tuple(trial["FP_OUTER_COLOR"]))
self.targetScreen.setTargetInnerColor(tuple(trial["FP_INNER_COLOR"]))
self.targetScreen.setTargetOuterSize(fp_outer_radius)
self.targetScreen.setTargetInnerSize(fp_inner_radius)
self.hub.clearEvents("kb")
self.targetScreen.setTimeout(trial["PRE_POS_CHANGE_INTERVAL"])
self._TRIAL_STATE = trial, "FIRST_PRE_POS_CHANGE_KEY"
target_pos1_color1_time, time_since_flip, event = self.targetScreen.switchTo(
msg="TRIAL_TARGET_INITIAL_COLOR"
)
self.targetScreen.setTargetPosition(nextTargetPosition)
self.targetScreen.setTimeout(trial["PRE_COLOR_CHANGE_INTERVAL"])
self._TRIAL_STATE = trial, "FIRST_POST_POS_CHANGE_KEY"
# create a 3 degree circular region (1.5 degree radius) around the next target position
# for use as out invisible boundary
self.targetScreen.nextAreaOfInterest = Point(*nextTargetPosition).buffer(((ppd_x + ppd_y) / 2.0) * 1.5)
target_pos2_color1_time, time_since_flip, event = self.targetScreen.switchTo(msg="TRIAL_TARGET_MOVE")
self.targetScreen.setTargetInnerColor(tuple(trial["FP_INNER_COLOR2"]))
self.targetScreen.setTimeout(trial["POST_COLOR_CHANGE_INTERVAL"])
self._TRIAL_STATE = trial, "FIRST_POST_COLOR_CHANGE_KEY"
target_pos2_color2_time, time_since_flip, event = self.targetScreen.switchTo(
msg="TRIAL_TARGET_COLOR_TWO"
)
# end of 'trial sequence'
# send condition variables used / populated to ioDataStore
toSend = [self.hub.experimentSessionID, trialSet.getCurrentConditionSetIteration()]
trial["TSTART_TIME"] = target_pos1_color1_time
trial["APPROX_TEND_TIME"] = target_pos2_color2_time + time_since_flip
trial["target_pos1_color1_time"] = target_pos1_color1_time
trial["target_pos2_color1_time"] = target_pos2_color1_time
trial["target_pos2_color2_time"] = target_pos2_color2_time
if self.targetScreen.aoiTriggeredID:
trial["VOG_SAMPLE_ID_AOI_TRIGGER"] = self.targetScreen.aoiTriggeredID
trial["VOG_SAMPLE_TIME_AOI_TRIGGER"] = self.targetScreen.aoiTriggeredTime
if self.targetScreen.aoiBestGaze:
trial["BEST_GAZE_X"] = self.targetScreen.aoiBestGaze[0]
trial["BEST_GAZE_Y"] = self.targetScreen.aoiBestGaze[1]
self._TRIAL_STATE = None
if self.targetScreen.nextAreaOfInterest:
del self.targetScreen.nextAreaOfInterest
self.targetScreen.nextAreaOfInterest = None
toSend.extend(trial.tolist())
self.hub.addRowToConditionVariableTable(toSend)
# end of block of trials, clear screen
self.clearScreen.flip(text="BLOCK_END")
self._TRIAL_STATE = None
# if tracking eye position, turn off eye tracking.
if tracker:
tracker.setRecordingState(False)
if daq:
daq.enableEventReporting(False)
# turn off high priority so python GC can clean up if it needs to.
Computer.disableHighPriority()
# give a 100 msec delay before starting next block
self.hub.wait(0.100)
# end of block set, return from method.
self.clearScreen.flip(text="BLOCK_SET_END")
return True
print "You played around with the mouse cursor for {0} seconds.".format(
k.time-first_flip_time)
print ''
# wait 250 msec before ending the experiment
# (makes it feel less abrupt after you press the key)
actualDelay=io.wait(0.250)
print "Delay requested %.6f, actual delay %.6f, Diff: %.6f"%(
0.250,actualDelay,actualDelay-0.250)
print ''
# for fun, test getting a bunch of events at once,
# likely causing a mutlipacket getEvents() since we have not cleared the
# event buffer or retrieved events from anything but the keyboard since
# the start.
stime = Computer.currentSec()
events=io.getEvents()
etime=Computer.currentSec()
print 'event count: ', len(events),' delay (msec): ',(etime-stime)*1000.0
# close neccessary files / objects, 'disable high priority.
Computer.disableHighPriority()
psychoWindow.close()
# be sure to shutdown your ioHub server!
io.quit()
core.quit()
### End of experiment logic