Esempio n. 1
0
def buildArm(mode='guide'):

    Profiler.getInstance().push("arm_build")

    guideContainer = Container('armGuide')

    armGuide = ArmComponentGuide("arm", parent=guideContainer)
    armGuide.loadData({
        "name":
        "Arm",
        "location":
        "L",
        "bicepXfo":
        Xfo(Vec3(2.27, 15.295, -0.753)),
        "forearmXfo":
        Xfo(Vec3(5.039, 13.56, -0.859)),
        "wristXfo":
        Xfo(Vec3(7.1886, 12.2819, 0.4906)),
        "handXfo":
        Xfo(tr=Vec3(7.1886, 12.2819, 0.4906),
            ori=Quat(Vec3(-0.0865, -0.2301, -0.2623), 0.9331)),
        "bicepFKCtrlSize":
        1.75,
        "forearmFKCtrlSize":
        1.5
    })

    if mode == 'guide':
        builder = plugins.getBuilder()
        builder.build(guideContainer)

    elif mode == 'rig':
        synchronizer = plugins.getSynchronizer()
        synchronizer.setTarget(guideContainer)
        synchronizer.sync()

        armGuideData = armGuide.getRigBuildData()

        rigContainer = Container('armRig')
        arm = ArmComponent(parent=rigContainer)
        arm.loadData(armGuideData)

        builder = plugins.getBuilder()
        builder.build(rigContainer)
    else:
        LogMessage('Invalid mode set')

    Profiler.getInstance().pop()

    if __name__ == "__main__":
        print Profiler.getInstance().generateReport()
    else:
        if mode == 'guide':
            logHierarchy(armGuide)
        elif mode == 'rig':
            logHierarchy(arm)
Esempio n. 2
0
def buildArm(mode='guide'):

    Profiler.getInstance().push("arm_build")

    guideContainer = Container('armGuide')

    armGuide = ArmComponentGuide("arm", parent=guideContainer)
    armGuide.loadData({
            "name": "Arm",
            "location": "L",
            "bicepXfo": Xfo(Vec3(2.27, 15.295, -0.753)),
            "forearmXfo": Xfo(Vec3(5.039, 13.56, -0.859)),
            "wristXfo": Xfo(Vec3(7.1886, 12.2819, 0.4906)),
            "handXfo": Xfo(tr=Vec3(7.1886, 12.2819, 0.4906),
                           ori=Quat(Vec3(-0.0865, -0.2301, -0.2623), 0.9331)),
            "bicepFKCtrlSize": 1.75,
            "forearmFKCtrlSize": 1.5
        })

    if mode == 'guide':
        builder = plugins.getBuilder()
        builder.build(guideContainer)

    elif mode == 'rig':
        synchronizer = plugins.getSynchronizer()
        synchronizer.setTarget(guideContainer)
        synchronizer.sync()

        armGuideData = armGuide.getRigBuildData()

        rigContainer = Container('armRig')
        arm = ArmComponent(parent=rigContainer)
        arm.loadData(armGuideData)

        builder = plugins.getBuilder()
        builder.build(rigContainer)
    else:
        LogMessage('Invalid mode set')

    Profiler.getInstance().pop()

    if __name__ == "__main__":
        print Profiler.getInstance().generateReport()
    else:
        if mode == 'guide':
            logHierarchy(armGuide)
        elif mode == 'rig':
            logHierarchy(arm)
Esempio n. 3
0
    def __init__(self, name):

        Profiler.getInstance().push("Construct BobRig:" + name)
        super(BobRig, self).__init__(name)

        # Add Components
        mainSrtComponent = MainSrtComponentRig("mainSrt", self)

        spineComponent = SpineComponentRig("spine", self)
        spineComponent.loadData(data={
            'cogPosition': Vec3(0.0, 11.1351, -0.1382),
            'spine01Position': Vec3(0.0, 11.1351, -0.1382),
            'spine02Position': Vec3(0.0, 11.8013, -0.1995),
            'spine03Position': Vec3(0.0, 12.4496, -0.3649),
            'spine04Position': Vec3(0.0, 13.1051, -0.4821),
            'numDeformers': 4
        })

        neckComponentGuide = NeckComponentGuide(data={
            "location": "M",
            "neckPosition": Vec3(0.0, 16.5572, -0.6915),
            "neckEndPosition": Vec3(0.0, 17.4756, -0.421)
        })

        neckComponent = NeckComponentRig("neck", self)
        neckComponent.loadData(data=neckComponentGuide.getRigBuildData())

        headComponent = HeadComponentRig("head", self)
        headComponent.loadData(data={
            "headPosition": Vec3(0.0, 17.4756, -0.421),
            "headEndPosition": Vec3(0.0, 19.5, -0.421),
            "eyeLeftPosition": Vec3(0.3497, 18.0878, 0.6088),
            "eyeRightPosition": Vec3(-0.3497, 18.0878, 0.6088),
            "jawPosition": Vec3(0.0, 17.613, -0.2731)
        })

        clavicleLeftComponentGuide = ClavicleComponentGuide("clavicle", data={
            "location": "L",
            "clavicleXfo": Xfo(Vec3(0.1322, 15.403, -0.5723)),
            "clavicleUpVXfo": Xfo(Vec3(0.0, 1.0, 0.0)),
            "clavicleEndXfo": Xfo(Vec3(2.27, 15.295, -0.753))
        })

        clavicleLeftComponent = ClavicleComponentRig("clavicle", self)
        clavicleLeftComponent.loadData(data=clavicleLeftComponentGuide.getRigBuildData())

        clavicleRightComponentGuide = ClavicleComponentGuide("clavicle", data={
            "location": "R",
            "clavicleXfo": Xfo(Vec3(-0.1322, 15.403, -0.5723)),
            "clavicleUpVXfo": Xfo(Vec3(0.0, 1.0, 0.0)),
            "clavicleEndXfo": Xfo(Vec3(-2.27, 15.295, -0.753))
        })

        clavicleRightComponent = ClavicleComponentRig("clavicle", self)
        clavicleRightComponent.loadData(data=clavicleRightComponentGuide.getRigBuildData())

        armLeftComponentGuide = ArmComponentGuide("arm")
        armLeftComponentGuide.loadData({
            "location":"L",
            "bicepXfo": Xfo(Vec3(2.27, 15.295, -0.753)),
            "forearmXfo": Xfo(Vec3(5.039, 13.56, -0.859)),
            "wristXfo": Xfo(Vec3(7.1886, 12.2819, 0.4906)),
            "handXfo": Xfo(tr=Vec3(7.1886, 12.2819, 0.4906),
                           ori=Quat(Vec3(-0.0865, -0.2301, -0.2623), 0.9331)),
            "bicepFKCtrlSize": 1.75,
            "forearmFKCtrlSize": 1.5
        })

        armLeftComponent = ArmComponentRig("arm", self)
        armLeftComponent.loadData(data=armLeftComponentGuide.getRigBuildData())

        armRightComponentGuide = ArmComponentGuide("arm")
        armRightComponentGuide.loadData({
            "location":"R",
            "bicepXfo": Xfo(Vec3(-2.27, 15.295, -0.753)),
            "forearmXfo": Xfo(Vec3(-5.039, 13.56, -0.859)),
            "wristXfo": Xfo(Vec3(-7.1886, 12.2819, 0.4906)),
            "handXfo": Xfo(tr=Vec3(-7.1886, 12.2819, 0.4906),
                           ori=Quat(Vec3(-0.2301, -0.0865, -0.9331), 0.2623)),
            "bicepFKCtrlSize": 1.75,
            "forearmFKCtrlSize": 1.5
        })

        armRightComponent = ArmComponentRig("arm", self)
        armRightComponent.loadData(data=armRightComponentGuide.getRigBuildData() )

        legLeftComponentGuide = LegComponentGuide("leg")
        legLeftComponentGuide.loadData({
            "name":"Leg",
            "location": "L",
            "femurXfo": Xfo(Vec3(0.9811, 9.769, -0.4572)),
            "kneeXfo": Xfo(Vec3(1.4488, 5.4418, -0.5348)),
            "ankleXfo": Xfo(Vec3(1.841, 1.1516, -1.237)),
            "toeXfo": Xfo(Vec3(1.85, 0.4, 0.25)),
            "toeTipXfo": Xfo(Vec3(1.85, 0.4, 1.5))
        })

        legLeftComponent = LegComponentRig("leg", self)
        legLeftComponent.loadData(data=legLeftComponentGuide.getRigBuildData())

        legRightComponentGuide = LegComponentGuide("leg")
        legRightComponentGuide.loadData({
            "name":"Leg",
            "location": "R",
            "femurXfo": Xfo(Vec3(-0.9811, 9.769, -0.4572)),
            "kneeXfo": Xfo(Vec3(-1.4488, 5.4418, -0.5348)),
            "ankleXfo": Xfo(Vec3(-1.85, 1.1516, -1.237)),
            "toeXfo": Xfo(Vec3(-1.85, 0.4, 0.25)),
            "toeTipXfo": Xfo(Vec3(-1.85, 0.4, 1.5))
        })

        legRightComponent = LegComponentRig("leg", self)
        legRightComponent.loadData(data=legRightComponentGuide.getRigBuildData() )

        # ============
        # Connections
        # ============
        # Spine to Main SRT
        mainSrtRigScaleOutput = mainSrtComponent.getOutputByName('rigScale')
        mainSrtOffsetOutput = mainSrtComponent.getOutputByName('offset')
        spineInput = spineComponent.getInputByName('mainSrt')
        spineInput.setConnection(mainSrtOffsetOutput)

        spineRigScaleInput = spineComponent.getInputByName('rigScale')
        spineRigScaleInput.setConnection(mainSrtRigScaleOutput)

        # Neck to Spine
        spineEndOutput = spineComponent.getOutputByName('spineEnd')
        neckSpineEndInput = neckComponent.getInputByName('neckBase')
        neckSpineEndInput.setConnection(spineEndOutput)

        # Head to Neck
        neckEndOutput = neckComponent.getOutputByName('neckEnd')
        headBaseInput = headComponent.getInputByName('headBase')
        headBaseInput.setConnection(neckEndOutput)

        # Clavicle to Spine
        spineEndOutput = spineComponent.getOutputByName('spineEnd')
        clavicleLeftSpineEndInput = clavicleLeftComponent.getInputByName('spineEnd')
        clavicleLeftSpineEndInput.setConnection(spineEndOutput)
        clavicleRightSpineEndInput = clavicleRightComponent.getInputByName('spineEnd')
        clavicleRightSpineEndInput.setConnection(spineEndOutput)

        # Arm to Global SRT
        mainSrtOffsetOutput = mainSrtComponent.getOutputByName('offset')
        armLeftGlobalSRTInput = armLeftComponent.getInputByName('globalSRT')
        armLeftGlobalSRTInput.setConnection(mainSrtOffsetOutput)

        armLeftRigScaleInput = armLeftComponent.getInputByName('rigScale')
        armLeftRigScaleInput.setConnection(mainSrtRigScaleOutput)

        armRightGlobalSRTInput = armRightComponent.getInputByName('globalSRT')
        armRightGlobalSRTInput.setConnection(mainSrtOffsetOutput)

        armRightRigScaleInput = armRightComponent.getInputByName('rigScale')
        armRightRigScaleInput.setConnection(mainSrtRigScaleOutput)

        # Arm To Clavicle Connections
        clavicleLeftEndOutput = clavicleLeftComponent.getOutputByName('clavicleEnd')
        armLeftClavicleEndInput = armLeftComponent.getInputByName('clavicleEnd')
        armLeftClavicleEndInput.setConnection(clavicleLeftEndOutput)
        clavicleRightEndOutput = clavicleRightComponent.getOutputByName('clavicleEnd')
        armRightClavicleEndInput = armRightComponent.getInputByName('clavicleEnd')
        armRightClavicleEndInput.setConnection(clavicleRightEndOutput)

        # Leg to Global SRT
        mainSrtOffsetOutput = mainSrtComponent.getOutputByName('offset')
        legLeftGlobalSRTInput = legLeftComponent.getInputByName('globalSRT')
        legLeftGlobalSRTInput.setConnection(mainSrtOffsetOutput)

        legLeftRigScaleInput = legLeftComponent.getInputByName('rigScale')
        legLeftRigScaleInput.setConnection(mainSrtRigScaleOutput)

        legRightGlobalSRTInput = legRightComponent.getInputByName('globalSRT')
        legRightGlobalSRTInput.setConnection(mainSrtOffsetOutput)

        legRightRigScaleInput = legRightComponent.getInputByName('rigScale')
        legRightRigScaleInput.setConnection(mainSrtRigScaleOutput)

        # Leg To Pelvis Connections
        spinePelvisOutput = spineComponent.getOutputByName('pelvis')
        legLeftPelvisInput = legLeftComponent.getInputByName('pelvisInput')
        legLeftPelvisInput.setConnection(spinePelvisOutput)
        legRightPelvisInput = legRightComponent.getInputByName('pelvisInput')
        legRightPelvisInput.setConnection(spinePelvisOutput)

        Profiler.getInstance().pop()
import json

from kraken import plugins
from kraken.core.maths import Xfo, Vec3, Quat

from kraken_examples.arm_component import ArmComponentGuide, ArmComponentRig

from kraken.helpers.utility_methods import logHierarchy

leftArmGuide = ArmComponentGuide('arm')
leftArmGuide.loadData({
    'name':
    'Arm',
    'location':
    'L',
    'bicepXfo':
    Xfo(Vec3(2.27, 15.295, -0.753)),
    'forearmXfo':
    Xfo(Vec3(5.039, 13.56, -0.859)),
    'wristXfo':
    Xfo(Vec3(7.1886, 12.2819, 0.4906)),
    'handXfo':
    Xfo(tr=Vec3(7.1886, 12.2819, 0.4906),
        ori=Quat(Vec3(-0.0865, -0.2301, -0.2623), 0.9331)),
    'bicepFKCtrlSize':
    1.75,
    'forearmFKCtrlSize':
    1.5
})

# Save the arm guid data for persistence.
Esempio n. 5
0
import json

from kraken import plugins
from kraken.core.maths import Xfo, Vec3, Quat
from kraken_examples.arm_component import ArmComponentGuide, ArmComponentRig
from kraken.core.profiler import Profiler
from kraken.helpers.utility_methods import logHierarchy

Profiler.getInstance().push("arm_build")

armGuide = ArmComponentGuide("arm")
armGuide.loadData({
    "name":
    "Arm",
    "location":
    "L",
    "bicepXfo":
    Xfo(Vec3(2.27, 15.295, -0.753)),
    "forearmXfo":
    Xfo(Vec3(5.039, 13.56, -0.859)),
    "wristXfo":
    Xfo(Vec3(7.1886, 12.2819, 0.4906)),
    "handXfo":
    Xfo(tr=Vec3(7.1886, 12.2819, 0.4906),
        ori=Quat(Vec3(-0.0865, -0.2301, -0.2623), 0.9331)),
    "bicepFKCtrlSize":
    1.75,
    "forearmFKCtrlSize":
    1.5
})
Esempio n. 6
0
    def closeWidget(self, data):
        self.close()

    def clear(self):
        # for widget in self._paramWidgets:
        #     widget.unregisterNotificationListener()
        while self._paramsLayout.count():
            self._paramsLayout.takeAt(0).widget().deleteLater()
        self._paramWidgets = []
        self._gridRow = 0


    ##############################
    ## Events

    def closeEvent(self, event):
        if self.nodeItem is not None:
            self.nodeItem.inspectorClosed()


if __name__ == "__main__":
    app = QtGui.QApplication(sys.argv)

    from kraken_examples.arm_component import ArmComponentGuide, ArmComponentRig
    armGuide = ArmComponentGuide("arm")

    widget = ComponentInspector(component=armGuide)
    widget.show()
    sys.exit(app.exec_())

import json

from kraken.core.maths import Xfo, Vec3, Quat

from kraken_examples.arm_component import ArmComponentGuide, ArmComponentRig

from kraken.core.io.kraken_saver import KrakenSaver
from kraken.core.io.kraken_loader import KrakenLoader
from kraken.helpers.utility_methods import logHierarchy


armGuide = ArmComponentGuide("arm")
armGuide.loadData({
        "name": "Arm",
        "location": "L",
        "bicepXfo": Xfo(Vec3(2.27, 15.295, -0.753)),
        "forearmXfo": Xfo(Vec3(5.039, 13.56, -0.859)),
        "wristXfo": Xfo(Vec3(7.1886, 12.2819, 0.4906)),
        "handXfo": Xfo(tr=Vec3(7.1886, 12.2819, 0.4906),
                       ori=Quat(Vec3(-0.0865, -0.2301, -0.2623), 0.9331)),
        "bicepFKCtrlSize": 1.75,
        "forearmFKCtrlSize": 1.5
    })

# Save the arm guid data for persistence.
saveData = armGuide.saveData()

armGuide2 = ArmComponentGuide("arm2")
armGuide2.loadData(saveData)

armRigData = armGuide.getRigBuildData()
Esempio n. 8
0
import json

from kraken import plugins
from kraken.core.maths import Xfo, Vec3, Quat

from kraken_examples.arm_component import ArmComponentGuide, ArmComponentRig

from kraken.helpers.utility_methods import logHierarchy

leftArmGuide = ArmComponentGuide('arm')
leftArmGuide.loadData({
        'name': 'Arm',
        'location': 'L',
        'bicepXfo': Xfo(Vec3(2.27, 15.295, -0.753)),
        'forearmXfo': Xfo(Vec3(5.039, 13.56, -0.859)),
        'wristXfo': Xfo(Vec3(7.1886, 12.2819, 0.4906)),
        'handXfo': Xfo(tr=Vec3(7.1886, 12.2819, 0.4906),
                       ori=Quat(Vec3(-0.0865, -0.2301, -0.2623), 0.9331)),
        'bicepFKCtrlSize': 1.75,
        'forearmFKCtrlSize': 1.5
    })

# Save the arm guid data for persistence.
rightArmGuide = ArmComponentGuide('arm')
rightArmGuide.setLocation('R')

rightArmGuide.pasteData(leftArmGuide.copyData(), setLocation=False)

builder = plugins.getBuilder()
builder.build(leftArmGuide)
builder.build(rightArmGuide)
Esempio n. 9
0
    def __init__(self, name):

        Profiler.getInstance().push("Construct BobGuide:" + name)
        super(BobGuide, self).__init__(name)

        # Add Components to Layers
        spineComponent = SpineComponentGuide('spine', self)
        neckComponentGuide = NeckComponentGuide('neck', self)
        headComponent = HeadComponentGuide("head", self)

        clavicleLeftComponentGuide = ClavicleComponentGuide("clavicle", self)
        clavicleLeftComponentGuide.loadData({
            "location": "L",
            "clavicleXfo": Xfo(Vec3(0.1322, 15.403, -0.5723)),
            "clavicleUpVXfo": Xfo(Vec3(0.0, 1.0, 0.0)),
            "clavicleEndXfo": Xfo(Vec3(2.27, 15.295, -0.753))
        })

        armLeftComponentGuide = ArmComponentGuide("arm", self)
        armLeftComponentGuide.loadData({
            "location": "L",
            "bicepXfo": Xfo(Vec3(2.27, 15.295, -0.753)),
            "forearmXfo": Xfo(Vec3(5.039, 13.56, -0.859)),
            "wristXfo": Xfo(Vec3(7.1886, 12.2819, 0.4906)),
            "handXfo": Xfo(tr=Vec3(7.1886, 12.2819, 0.4906),
                           ori=Quat(Vec3(-0.0865, -0.2301, -0.2623), 0.9331)),
            "bicepFKCtrlSize": 1.75,
            "forearmFKCtrlSize": 1.5})

        clavicleRightComponentGuide = ClavicleComponentGuide("clavicle", self)
        clavicleRightComponentGuide.loadData({
            "location": "R",
            "clavicleXfo": Xfo(Vec3(-0.1322, 15.403, -0.5723)),
            "clavicleUpVXfo": Xfo(Vec3(0.0, 1.0, 0.0)),
            "clavicleEndXfo": Xfo(Vec3(-2.27, 15.295, -0.753))
        })

        armRightComponentGuide = ArmComponentGuide("arm", self)
        armRightComponentGuide.loadData({
            "location": "R",
            "bicepXfo": Xfo(Vec3(-2.27, 15.295, -0.753)),
            "forearmXfo": Xfo(Vec3(-5.039, 13.56, -0.859)),
            "wristXfo": Xfo(Vec3(-7.1886, 12.2819, 0.4906)),
            "handXfo": Xfo(tr=Vec3(-7.1886, 12.2819, 0.4906),
                           ori=Quat(Vec3(-0.2301, -0.0865, -0.9331), 0.2623)),
            "bicepFKCtrlSize": 1.75,
            "forearmFKCtrlSize": 1.5
        })

        legLeftComponentGuide = LegComponentGuide("leg", self)
        legLeftComponentGuide.loadData({
            "location": "L",
            "femurXfo": Xfo(Vec3(0.9811, 9.769, -0.4572)),
            "kneeXfo": Xfo(Vec3(1.4488, 5.4418, -0.5348)),
            "ankleXfo": Xfo(Vec3(1.841, 1.1516, -1.237)),
            "toeXfo": Xfo(Vec3(1.85, 0.4, 0.25)),
            "toeTipXfo": Xfo(Vec3(1.85, 0.4, 1.5))
        })

        legRightComponentGuide = LegComponentGuide("leg", self)
        legRightComponentGuide.loadData({
            "location": "R",
            "femurXfo": Xfo(Vec3(-0.9811, 9.769, -0.4572)),
            "kneeXfo": Xfo(Vec3(-1.4488, 5.4418, -0.5348)),
            "ankleXfo": Xfo(Vec3(-1.841, 1.1516, -1.237)),
            "toeXfo": Xfo(Vec3(-1.85, 0.4, 0.25)),
            "toeTipXfo": Xfo(Vec3(-1.85, 0.4, 1.5))
        })

        Profiler.getInstance().pop()