def animate(i):
plt.title( str(timedelta(seconds=i * 30) + start_date) )
lons = []
lats = []
vals = []
for station in stations:
for prn in get_data.satellites:
if prn not in vtec[station] or i >= len(vtec[station][prn][0]):
continue
try:
ecef = vtec[station][prn][0][i]
except IndexError:
print(station, prn, i)
raise
if ecef is None:
continue
lat, lon, _ = coordinates.ecef2geodetic(ecef)
lon = lon if lon > 0 else lon + 360
lons.append(lon)
lats.append(lat)
vals.append(filtered[station][prn][i])
scatter.set_offsets(numpy.array((lons, lats)).T)
max_tec = 0.1
min_tec = -0.1
scatter.set_color( cm.plasma(numpy.maximum(numpy.array(vals) - min_tec, 0) / (max_tec - min_tec)) )
def animate(i):
plt.title( str(timedelta(seconds=i * 30) + start_date) )
lons = []
lats = []
vals = []
for station in stations:
for prn in ['G%02d' % x for x in range(1, 33)]:
if prn not in vtec[station] or i >= len(vtec[station][prn][0]):
continue
try:
ecef = vtec[station][prn][0][i]
except IndexError:
print(station, prn, i)
raise
if ecef is None:
continue
lat, lon, _ = coordinates.ecef2geodetic(ecef)
lon = lon if lon > 0 else lon + 360
lons.append(lon)
lats.append(lat)
vals.append(vtec[station][prn][1][i])
scatter.set_offsets(numpy.array(globe(lons, lats)).T)
max_tec = 60
scatter.set_color( cm.plasma(numpy.array(vals) / max_tec) )
def tropo_delay(measurement, height=0):
# base tropospheric delay Tr(E)
lat = numpy.radians(coordinates.ecef2geodetic(measurement.sat_pos)[0])
trzd, trzw, _, _ = Trz(lat, height, measurement.recv_time)
m_d = M_dry(lat, height, measurement.recv_time)
m_w = M_wet(lat)
return trzd * m_d + trzw * m_w
def get_data_point(scenario, tickpair, tick, z_index):
'''helper function to get the information of interest from the station_vtecs file.'''
s = tickpair[0]
p = tickpair[1]
ecef = scenario.station_vtecs[s][p][0][tick]
lat, lon, _ = ecef2geodetic(ecef)
vtec = scenario.station_vtecs[s][p][1][tick]
slant = scenario.station_vtecs[s][p][2][tick]
prn_index = z_index.index(p)
stn_index = z_index.index(s)
return lat, lon, vtec, slant * DK, prn_index, stn_index
def est_tec(ionmap, startdate, tick, pos):
# round time to 15 minutes
time = tick * 30
rounded_minutes = round(time / (15 * 60)) * (15)
obs_time = startdate + timedelta(minutes=rounded_minutes)
lat, lon, _ = coordinates.ecef2geodetic(pos)
rlat = round(lat / 2.5) * 2.5
rlon = round(lon / 5) * 5
return ionmap[obs_time][rlat][rlon]
def gather_data(station_vtecs):
'''
Looks for 'coincidences'. A 'coincidence' is a set of observables for various sat/rec pairs that cross
into the ionosphere at approximately the same location (lat,lon).
Returns four items:
final_coicidences (dict) {(lat, lon, i): Observation((lat, lon, i), station, prn, vtec, s_to_v, ...}
measurements (list): [Observation 1, ....]
sats, recvrs (set): sets of satellite and receiver objects included.
'''
# mapping of (lat, lon, time) to [measurement_idx]
coincidences = defaultdict(list)
measurements = []
svs = set()
recvs = set()
for cnt, (station, station_dat) in enumerate(station_vtecs.items()):
print("gathering data for %3d/%d" % (cnt, len(station_vtecs)))
for prn, (locs, dats, slants) in station_dat.items():
for i in range(0, len(locs), time_res // 30):
# look through all data in this time window
cois = set()
for j in range(i, i + time_res // 30):
# skip if there's no data...
if j >= len(locs) or locs[j] is None:
continue
lat, lon, _ = ecef2geodetic(locs[j])
coi = (round_to_res(lat,
lat_res), round_to_res(lon,
lon_res), i)
# only log unique COIs
if coi in cois:
continue
cois.add(coi)
obs = Observation(coi, station, prn, dats[j], slants[j])
coincidences[coi].append(obs)
final_coincidences = dict()
# only include coincidences with >= 2 measurements
for coi, obss in coincidences.items():
if len({obs.station for obs in obss}) > 1:
final_coincidences[coi] = obss
for obs in obss:
svs.add(obs.sat)
recvs.add(obs.station)
measurements.append(obs)
return final_coincidences, measurements, svs, recvs
def gather_data(station_vtecs):
# mapping of (lat, lon, time) to [measurement_idx]
coincidences = defaultdict(list)
measurements = []
svs = set()
recvs = set()
for cnt, (station, station_dat) in enumerate(station_vtecs.items()):
print("gathering data for %3d/%d" % (cnt, len(station_vtecs)))
for prn, (locs, dats, slants) in station_dat.items():
for i in range(0, len(locs), time_res // 30):
# look through all data in this time window
cois = set()
for j in range(i, i + time_res // 30):
# skip if there's no data...
if j >= len(locs) or locs[j] is None:
continue
lat, lon, _ = ecef2geodetic(locs[j])
coi = (round_to_res(lat,
lat_res), round_to_res(lon,
lon_res), i)
# only log unique COIs
if coi in cois:
continue
cois.add(coi)
obs = Observation(coi, station, prn, dats[j], slants[j])
coincidences[coi].append(obs)
final_coincidences = dict()
# only include coincidences with >= 2 measurements
for coi, obss in coincidences.items():
if len({obs.station for obs in obss}) > 1:
final_coincidences[coi] = obss
for obs in obss:
svs.add(obs.sat)
recvs.add(obs.station)
measurements.append(obs)
return final_coincidences, measurements, svs, recvs
def plot_map_depletion():
globe = Basemap(projection='mill', lon_0=180)
# plot coastlines, draw label meridians and parallels.
globe.drawcoastlines()
#globe.drawparallels(numpy.arange(-90,90,30),labels=[1,0,0,0])
#globe.drawmeridians(numpy.arange(globe.lonmin,globe.lonmax+30,60),labels=[0,0,0,1])
scatter = globe.scatter([], [])
stations = {
'bkvl',
'brtw',
'chin',
'crst',
'fl75',
'flbn',
'flf1',
'flkw',
'flwe',
'fmyr',
'gnvl',
'laud',
'mtnt',
'napl',
'okcb',
'ormd',
'pbch',
'pcla',
'pltk',
'prry',
'talh',
'wach',
'xcty',
'zefr',
'zjx1',
'zma1',
}
stations &= set(station_data.keys())
receivers = ['G%02d' % i for i in range(1, 32)]
lats = [[] for _ in range(2880)]
lons = [[] for _ in range(2880)]
values = [[] for _ in range(2880)]
for st, sv in itertools.product(stations, receivers):
locs, depls = get_depletion_for(st, sv)
for i in range(2880):
loc = locs[i]
depl = depls[i]
if loc is not None and not math.isnan(depl):
lat, lon, _ = coordinates.ecef2geodetic(loc)
lon = lon if lon > 0 else lon + 360
lats[i].append(lat)
lons[i].append(lon)
values[i].append(depl)
def animate(i):
plt.title(str("%0.2f" % (24 * i / 2880)))
lon = lons[i]
lat = lats[i]
val = values[i]
scatter.set_offsets(numpy.array(globe(lon, lat)).T)
scatter.set_color(cm.plasma(numpy.array(val) / 8))
def init():
scatter.set_offsets([])
ani = animation.FuncAnimation(plt.gcf(),
animate,
init_func=init,
frames=range(1600, 2400),
repeat=True,
interval=60)
#globe.draw()
#globe.show(block=False)
plt.show()
print("done")
return ani
def gather_data(start_time, station_vtecs):
'''
Looks for 'coincidences'. A 'coincidence' is a set of observables for various sat/rec pairs that cross
into the ionosphere at approximately the same location (lat,lon).
Returns four items:
final_coicidences (dict) {(lat, lon, i): Observation((lat, lon, i), station, prn, vtec, s_to_v, ...}
measurements (list): [Observation 1, ....]
sats, recvrs (set): sets of satellite and receiver objects included.
'''
# mapping of (lat, lon, time) to [measurement_idx]
coincidences = defaultdict(list)
measurements = []
svs = set()
recvs = set()
for cnt, (station, station_dat) in enumerate(station_vtecs.items()):
print("gathering data for %3d/%d" % (cnt, len(station_vtecs)))
for prn, (locs, dats, slants) in station_dat.items():
if len(locs) == 0:
continue
# convert locs to lat lon in bulk for much better speed
# dirty hack to force numpy to treat the array as 1d
locs.append(None)
# indices with locations set
idxs = numpy.where(
numpy.logical_not(numpy.vectorize(is_)(locs, None)))
locs.pop(-1)
if len(idxs[0]) == 0:
continue
locs_lla = ecef2geodetic(numpy.stack(numpy.array(locs)[idxs]))
prev_coi = None
for i, idx in enumerate(idxs[0]):
cois = set()
lat, lon, _ = locs_lla[i]
coi = (round_to_res(lat, lat_res), round_to_res(lon, lon_res),
(idx // (time_res / 30)) * 30)
if coi == prev_coi:
continue
prev_coi = coi
gpstime = start_time + timedelta(seconds=30 * int(idx))
gpstime = GPSTime.from_datetime(gpstime)
obs = Observation(coi, station, prn, dats[idx], slants[idx],
gpstime)
coincidences[coi].append(obs)
final_coincidences = dict()
# only include coincidences with >= 2 measurements
for coi, obss in coincidences.items():
if (len({obs.station
for obs in obss}) > 1 or len({obs.sat
for obs in obss}) > 1):
final_coincidences[coi] = obss
for obs in obss:
svs.add(obs.sat)
recvs.add(obs.station)
measurements.append(obs)
return final_coincidences, measurements, svs, recvs
vals = []
for j in range(len(meas_datas)):
if len(meas_datas[j]) <= i:
continue
meas = meas_datas[j][i]
for sv_dat in meas:
res = tec.calc_vtec(dog, station_poss[j], sv_dat)
if res is None:
continue
vtec, loc = res
all_values.append(vtec)
lat, lon, _ = coordinates.ecef2geodetic(loc)
lats.append(lat)
lons.append(lon if lon > 0 else lon + 360)
connection_name = stations[j] + "-" + sv_dat.prn
vals.append( (vtec, connection_name, len(connections[connection_name])) )
connections[connection_name].append(vtec)
xs, ys = globe(lons, lats)
ticks.append( (xs, ys, vals) )
epsilon = 0.4
min_tec = numpy.quantile([x for x in all_values if not math.isnan(x)], 0.5 - epsilon)
max_tec = numpy.quantile([x for x in all_values if not math.isnan(x)], 0.5 + epsilon)
smoothed = dict()
