def test_mroute_with_RP_default_route_all_nodes_p2(request):
"""
TC_50 Verify mroute when LHR,FHR,RP and transit routers reachable
using default routes
"""
tgen = get_topogen()
tc_name = request.node.name
write_test_header(tc_name)
# Creating configuration from JSON
kill_iperf(tgen)
clear_ip_mroute(tgen)
reset_config_on_routers(tgen)
clear_ip_pim_interface_traffic(tgen, topo)
# Don"t run this test if we have any failure.
if tgen.routers_have_failure():
pytest.skip(tgen.errors)
step(
"Remove c1-c2 connected link to simulate topo "
"c1(LHR)---l1(RP)----r2---f1-----c2(FHR)"
)
intf_c1_c2 = topo["routers"]["c1"]["links"]["c2"]["interface"]
intf_c2_c1 = topo["routers"]["c2"]["links"]["c1"]["interface"]
shutdown_bringup_interface(tgen, "c1", intf_c1_c2, False)
shutdown_bringup_interface(tgen, "c2", intf_c2_c1, False)
step("Enable the PIM on all the interfaces of FRR1, FRR2, FRR3")
step(
"Enable IGMP of FRR1 interface and send IGMP joins "
" from FRR1 node for group range (225.1.1.1-5)"
)
intf_c1_i4 = topo["routers"]["c1"]["links"]["i4"]["interface"]
input_dict = {
"c1": {"igmp": {"interfaces": {intf_c1_i4: {"igmp": {"version": "2"}}}}}
}
result = create_igmp_config(tgen, topo, input_dict)
assert result is True, "Testcase {}: Failed Error: {}".format(tc_name, result)
input_join = {"i4": topo["routers"]["i4"]["links"]["c1"]["interface"]}
for recvr, recvr_intf in input_join.items():
result = config_to_send_igmp_join_and_traffic(
tgen, topo, tc_name, recvr, recvr_intf, GROUP_RANGE_1, join=True
)
assert result is True, "Testcase {}: Failed Error: {}".format(tc_name, result)
result = iperfSendIGMPJoin(tgen, recvr, IGMP_JOIN_RANGE_1, join_interval=1)
assert result is True, "Testcase {}: Failed Error: {}".format(tc_name, result)
step("Configure static RP for (225.1.1.1-5) as R2")
input_dict = {
"l1": {
"pim": {
"rp": [
{
"rp_addr": topo["routers"]["l1"]["links"]["lo"]["ipv4"].split(
"/"
)[0],
"group_addr_range": GROUP_RANGE,
}
]
}
}
}
result = create_pim_config(tgen, topo, input_dict)
assert result is True, "Testcase {} : Failed Error: {}".format(tc_name, result)
step("Send traffic from C2 to all the groups ( 225.1.1.1 to 225.1.1.5)")
input_src = {"i5": topo["routers"]["i5"]["links"]["c2"]["interface"]}
for src, src_intf in input_src.items():
result = config_to_send_igmp_join_and_traffic(
tgen, topo, tc_name, src, src_intf, GROUP_RANGE_1, traffic=True
)
assert result is True, "Testcase {}: Failed Error: {}".format(tc_name, result)
result = iperfSendTraffic(tgen, src, IGMP_JOIN_RANGE_1, 32, 2500)
assert result is True, "Testcase {} : Failed Error: {}".format(tc_name, result)
source_i5 = topo["routers"]["i5"]["links"]["c2"]["ipv4"].split("/")[0]
input_dict_starg = [
{
"dut": "c1",
"src_address": "*",
"iif": topo["routers"]["c1"]["links"]["l1"]["interface"],
"oil": topo["routers"]["c1"]["links"]["i4"]["interface"],
}
]
input_dict_sg = [
{
"dut": "c1",
"src_address": source_i5,
"iif": topo["routers"]["c1"]["links"]["l1"]["interface"],
"oil": topo["routers"]["c1"]["links"]["i4"]["interface"],
}
]
step("Verify mroutes and iff upstream")
for data in input_dict_sg:
result = verify_ip_mroutes(
tgen,
data["dut"],
data["src_address"],
IGMP_JOIN_RANGE_1,
data["iif"],
data["oil"],
)
assert result is True, "Testcase {} : Failed Error: {}".format(tc_name, result)
result = verify_upstream_iif(
tgen, data["dut"], data["iif"], data["src_address"], IGMP_JOIN_RANGE_1
)
assert result is True, "Testcase {} : Failed Error: {}".format(tc_name, result)
for data in input_dict_starg:
result = verify_ip_mroutes(
tgen,
data["dut"],
data["src_address"],
IGMP_JOIN_RANGE_1,
data["iif"],
data["oil"],
)
assert result is True, "Testcase {} : Failed Error: {}".format(tc_name, result)
result = verify_upstream_iif(
tgen, data["dut"], data["iif"], data["src_address"], IGMP_JOIN_RANGE_1
)
assert result is True, "Testcase {} : Failed Error: {}".format(tc_name, result)
step("Delete static routes RP on all the nodes")
input_dict = {
"c2": {
"static_routes": [
{"network": ["1.0.4.11/32"], "next_hop": "10.0.3.2", "delete": True}
]
},
"c1": {
"static_routes": [
{"network": ["1.0.4.11/32"], "next_hop": "10.0.2.2", "delete": True}
]
},
"r2": {
"static_routes": [
{"network": ["1.0.4.11/32"], "next_hop": "10.0.12.1", "delete": True}
]
},
"f1": {
"static_routes": [
{"network": ["1.0.4.11/32"], "next_hop": "10.0.7.2", "delete": True}
]
},
}
result = create_static_routes(tgen, input_dict)
assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
step("Verify RP info unknown after removing static route from c2 ")
dut = "c2"
rp_address = topo["routers"]["l1"]["links"]["lo"]["ipv4"].split("/")[0]
SOURCE = "Static"
result = verify_pim_rp_info(
tgen, topo, dut, GROUP_RANGE_1, "Unknown", rp_address, SOURCE
)
assert result is True, "Testcase {} :Failed \n Error: {}".format(tc_name, result)
for data in input_dict_starg:
result = verify_ip_mroutes(
tgen,
data["dut"],
data["src_address"],
IGMP_JOIN_RANGE_1,
data["iif"],
data["oil"],
expected=False,
)
assert result is not True, ("Testcase {} : Failed \n "
"mroutes are still present \n Error: {}".format(
tc_name, result
))
result = verify_upstream_iif(
tgen,
data["dut"],
data["iif"],
data["src_address"],
IGMP_JOIN_RANGE_1,
expected=False,
)
assert result is not True, ("Testcase {} : Failed \n "
"upstream is still present \n Error: {}".format(
tc_name, result
))
step("Configure default routes on all the nodes")
intf_f1_c2 = topo["routers"]["f1"]["links"]["c2"]["ipv4"].split("/")[0]
intf_l1_c1 = topo["routers"]["l1"]["links"]["c1"]["ipv4"].split("/")[0]
intf_l1_r2 = topo["routers"]["l1"]["links"]["r2"]["ipv4"].split("/")[0]
intf_r2_f1 = topo["routers"]["r2"]["links"]["f1"]["ipv4"].split("/")[0]
input_dict = {
"c1": {"static_routes": [{"network": "0.0.0.0/0", "next_hop": intf_l1_c1}]},
"c2": {"static_routes": [{"network": "0.0.0.0/0", "next_hop": intf_f1_c2}]},
"r2": {"static_routes": [{"network": "0.0.0.0/0", "next_hop": intf_l1_r2}]},
"f1": {"static_routes": [{"network": "0.0.0.0/0", "next_hop": intf_r2_f1}]},
}
result = create_static_routes(tgen, input_dict)
assert result is True, "Testcase {} :Failed \n Error {}".format(tc_name, result)
step("applying ip nht config on c2")
raw_config = {
"c1": {"raw_config": ["ip nht resolve-via-default"]},
"c2": {"raw_config": ["ip nht resolve-via-default"]},
"r2": {"raw_config": ["ip nht resolve-via-default"]},
"f1": {"raw_config": ["ip nht resolve-via-default"]},
"l1": {"raw_config": ["ip nht resolve-via-default"]},
}
result = apply_raw_config(tgen, raw_config)
assert result is True, "Testcase {} : Failed Error: {}".format(tc_name, result)
step("Verify RP info Not unknown after removing static route from c2 ")
dut = "c2"
step("Verify RP info is NOT unknown after removing static route from c2 ")
result = verify_pim_rp_info(
tgen, topo, dut, GROUP_RANGE_1, "Unknown", rp_address, SOURCE, expected=False
)
assert result is not True, ("Testcase {} : Failed \n "
"RP info is unknown after removing static route from c2 \n Error: {}".format(
tc_name, result
))
step("Verify (s,g) populated after adding default route ")
for data in input_dict_sg:
result = verify_ip_mroutes(
tgen,
data["dut"],
data["src_address"],
IGMP_JOIN_RANGE_1,
data["iif"],
data["oil"],
)
assert result is True, "Testcase {} : Failed Error: {}".format(tc_name, result)
result = verify_upstream_iif(
tgen, data["dut"], data["iif"], data["src_address"], IGMP_JOIN_RANGE_1
)
assert result is True, "Testcase {} : Failed Error: {}".format(tc_name, result)
step("Verify (*,g) populated after adding default route ")
for data in input_dict_starg:
result = verify_ip_mroutes(
tgen,
data["dut"],
data["src_address"],
IGMP_JOIN_RANGE_1,
data["iif"],
data["oil"],
)
assert result is True, "Testcase {} : Failed Error: {}".format(tc_name, result)
result = verify_upstream_iif(
tgen, data["dut"], data["iif"], data["src_address"], IGMP_JOIN_RANGE_1
)
assert result is True, "Testcase {} : Failed Error: {}".format(tc_name, result)
write_test_footer(tc_name)
def test_PIM_hello_tx_rx_p1(request):
"""
TC_54 Verify received and transmit hello stats
are getting cleared after PIM nbr reset
"""
tgen = get_topogen()
tc_name = request.node.name
write_test_header(tc_name)
# Creating configuration from JSON
kill_iperf(tgen)
clear_ip_mroute(tgen)
reset_config_on_routers(tgen)
clear_ip_pim_interface_traffic(tgen, topo)
# Don"t run this test if we have any failure.
if tgen.routers_have_failure():
pytest.skip(tgen.errors)
step(
"Remove c1-c2 connected link to simulate topo "
"c1(LHR)---l1(RP)----r2---f1-----c2(FHR)"
)
intf_c1_c2 = topo["routers"]["c1"]["links"]["c2"]["interface"]
intf_c2_c1 = topo["routers"]["c2"]["links"]["c1"]["interface"]
shutdown_bringup_interface(tgen, "c1", intf_c1_c2, False)
shutdown_bringup_interface(tgen, "c2", intf_c2_c1, False)
step("Enable the PIM on all the interfaces of FRR1, FRR2, FRR3")
step(
"Enable IGMP of FRR1 interface and send IGMP joins "
" from FRR1 node for group range (225.1.1.1-5)"
)
intf_c1_i4 = topo["routers"]["c1"]["links"]["i4"]["interface"]
input_dict = {
"c1": {"igmp": {"interfaces": {intf_c1_i4: {"igmp": {"version": "2"}}}}}
}
result = create_igmp_config(tgen, topo, input_dict)
assert result is True, "Testcase {}: Failed Error: {}".format(tc_name, result)
input_join = {"i4": topo["routers"]["i4"]["links"]["c1"]["interface"]}
for recvr, recvr_intf in input_join.items():
result = config_to_send_igmp_join_and_traffic(
tgen, topo, tc_name, recvr, recvr_intf, GROUP_RANGE_1, join=True
)
assert result is True, "Testcase {}: Failed Error: {}".format(tc_name, result)
result = iperfSendIGMPJoin(tgen, recvr, IGMP_JOIN_RANGE_1, join_interval=1)
assert result is True, "Testcase {}: Failed Error: {}".format(tc_name, result)
step("Configure static RP for (225.1.1.1-5) as R2")
input_dict = {
"l1": {
"pim": {
"rp": [
{
"rp_addr": topo["routers"]["l1"]["links"]["lo"]["ipv4"].split(
"/"
)[0],
"group_addr_range": GROUP_RANGE,
}
]
}
}
}
result = create_pim_config(tgen, topo, input_dict)
assert result is True, "Testcase {} : Failed Error: {}".format(tc_name, result)
step("Send Mcast traffic from C2 to all the groups ( 225.1.1.1 to 225.1.1.5)")
input_src = {"i5": topo["routers"]["i5"]["links"]["c2"]["interface"]}
for src, src_intf in input_src.items():
result = config_to_send_igmp_join_and_traffic(
tgen, topo, tc_name, src, src_intf, GROUP_RANGE_1, traffic=True
)
assert result is True, "Testcase {}: Failed Error: {}".format(tc_name, result)
result = iperfSendTraffic(tgen, src, IGMP_JOIN_RANGE_1, 32, 2500)
assert result is True, "Testcase {} : Failed Error: {}".format(tc_name, result)
source_i5 = topo["routers"]["i5"]["links"]["c2"]["ipv4"].split("/")[0]
input_dict_starg = [
{
"dut": "c1",
"src_address": "*",
"iif": topo["routers"]["c1"]["links"]["l1"]["interface"],
"oil": topo["routers"]["c1"]["links"]["i4"]["interface"],
}
]
input_dict_sg = [
{
"dut": "c1",
"src_address": source_i5,
"iif": topo["routers"]["c1"]["links"]["l1"]["interface"],
"oil": topo["routers"]["c1"]["links"]["i4"]["interface"],
}
]
step("(*,G) and (S,G) created on f1 and node verify using 'show ip mroute'")
for data in input_dict_sg:
result = verify_ip_mroutes(
tgen,
data["dut"],
data["src_address"],
IGMP_JOIN_RANGE_1,
data["iif"],
data["oil"],
)
assert result is True, "Testcase {} : Failed Error: {}".format(tc_name, result)
for data in input_dict_starg:
result = verify_ip_mroutes(
tgen,
data["dut"],
data["src_address"],
IGMP_JOIN_RANGE_1,
data["iif"],
data["oil"],
)
assert result is True, "Testcase {} : Failed Error: {}".format(tc_name, result)
intf_l1_c1 = topo["routers"]["l1"]["links"]["c1"]["interface"]
intf_c1_l1 = topo["routers"]["c1"]["links"]["l1"]["interface"]
step("verify before stats on C1")
state_dict = {
"c1": {
intf_c1_l1: ["helloTx", "helloRx"],
}
}
c1_state_before = verify_pim_interface_traffic(tgen, state_dict)
assert isinstance(
c1_state_before, dict
), "Testcase{} : Failed \n state_before is not dictionary \n "
"Error: {}".format(tc_name, result)
step("Flap PIM nbr while doing interface c1-l1 interface shut from f1 side")
shutdown_bringup_interface(tgen, "c1", intf_c1_l1, False)
step(
"After shut of local interface from c1 , verify rx/tx hello counters are cleared on c1 side"
"verify using 'show ip pim interface traffic'"
)
shutdown_bringup_interface(tgen, "c1", intf_c1_l1, True)
step("verify stats after on c1")
c1_state_after = verify_pim_interface_traffic(tgen, state_dict)
assert isinstance(
c1_state_after, dict
), "Testcase{} : Failed \n state_before is not dictionary \n "
"Error: {}".format(tc_name, result)
step("verify stats not increamented on c1")
result = verify_state_incremented(c1_state_before, c1_state_after)
assert (
result is not True
), "Testcase{} : Failed Error: {}" "stats incremented".format(tc_name, result)
step("verify before stats on l1")
l1_state_dict = {
"l1": {
intf_l1_c1: ["helloTx", "helloRx"],
}
}
l1_state_before = verify_pim_interface_traffic(tgen, l1_state_dict)
assert isinstance(
l1_state_before, dict
), "Testcase{} : Failed \n state_before is not dictionary \n "
"Error: {}".format(tc_name, result)
step("Flap PIM nbr while doing interface r2-c1 shut from r2 side")
shutdown_bringup_interface(tgen, "l1", intf_l1_c1, False)
step(
"After shut the interface from r2 side , verify r2 side rx and tx of hello"
"counters are resetted show ip pim interface traffic"
)
shutdown_bringup_interface(tgen, "l1", intf_l1_c1, True)
step("verify stats after on l1")
l1_state_after = verify_pim_interface_traffic(tgen, l1_state_dict)
assert isinstance(
l1_state_after, dict
), "Testcase{} : Failed \n state_before is not dictionary \n "
"Error: {}".format(tc_name, result)
step("verify stats not increamented on l1")
result = verify_state_incremented(l1_state_before, l1_state_after)
assert (
result is not True
), "Testcase{} : Failed Error: {}" "stats incremented".format(tc_name, result)
step("Reinit the dict")
c1_state_before = {}
l1_state_before = {}
c1_state_after = {}
l1_state_after = {}
step("verify before stats on C1")
state_dict = {
"c1": {
intf_c1_l1: ["helloTx", "helloRx"],
}
}
c1_state_before = verify_pim_interface_traffic(tgen, state_dict)
assert isinstance(
c1_state_before, dict
), "Testcase{} : Failed \n state_before is not dictionary \n "
"Error: {}".format(tc_name, result)
step("Flap c1-r2 pim nbr while changing ip address from c1 side")
c1_l1_ip_subnet = topo["routers"]["c1"]["links"]["l1"]["ipv4"]
raw_config = {
"c1": {
"raw_config": [
"interface {}".format(intf_c1_l1),
"no ip address {}".format(c1_l1_ip_subnet),
"ip address {}".format(NEW_ADDRESS_2_SUBNET),
]
}
}
result = apply_raw_config(tgen, raw_config)
assert result is True, "Testcase {} : Failed Error: {}".format(tc_name, result)
step("verify stats after on c1")
c1_state_after = verify_pim_interface_traffic(tgen, state_dict)
assert isinstance(
c1_state_after, dict
), "Testcase{} : Failed \n state_before is not dictionary \n "
"Error: {}".format(tc_name, result)
step("verify stats not increamented on c1")
result = verify_state_incremented(c1_state_before, c1_state_after)
assert (
result is not True
), "Testcase{} : Failed Error: {}" "stats incremented".format(tc_name, result)
write_test_footer(tc_name)
def test_BSR_election_p0(request):
"""
Verify group to RP mapping in FRR node when 2 BSR are present in the network
and both are having same BSR priority
Topology used:
b1_____
|
|
s1-----f1-----i1-----l1----r1
|
______|
b2
b1 - BSR 1
b2 - BSR 2
s1 - Source
f1 - FHR
i1 - Intermediate Router (also RP)
r1 - Receiver
"""
tgen = get_topogen()
tc_name = request.node.name
write_test_header(tc_name)
kill_iperf(tgen)
clear_ip_mroute(tgen)
reset_config_on_routers(tgen)
clear_ip_pim_interface_traffic(tgen, topo)
# Don"t run this test if we have any failure.
if tgen.routers_have_failure():
pytest.skip(tgen.errors)
reset_config_on_routers(tgen)
result = pre_config_to_bsm(tgen, topo, tc_name, "b1", "s1", "r1", "f1",
"i1", "l1", "packet1")
assert result is True, "Testcase {} :Failed \n Error {}".format(
tc_name, result)
result = pre_config_to_bsm(tgen, topo, tc_name, "b2", "s1", "r1", "f1",
"i1", "l1", "packet1")
assert result is True, "Testcase {} :Failed \n Error {}".format(
tc_name, result)
GROUP_ADDRESS = "225.1.1.1"
# Use scapy to send pre-defined packet from senser to receiver
step("Send BSR packet from b1 to FHR")
result = scapy_send_bsr_raw_packet(tgen, topo, "b1", "f1", "packet3")
assert result is True, "Testcase {} :Failed \n Error {}".format(
tc_name, result)
bsr_ip1 = topo["routers"]["b1"]["bsm"]["bsr_packets"]["packet1"][
"bsr"].split("/")[0]
time.sleep(1)
result = iperfSendIGMPJoin(tgen, "r1", GROUP_ADDRESS, join_interval=1)
assert result is True, "Testcase {}:Failed \n Error: {}".format(
tc_name, result)
# Verify bsr state in FHR
step("Verify if b1 is chosen as bsr in f1")
result = verify_pim_bsr(tgen, topo, "f1", bsr_ip1)
assert result is True, "Testcase {} :Failed \n Error {}".format(
tc_name, result)
dut = "l1"
group = "225.1.1.0/24"
# Find the elected rp from bsrp-info
step("Find the elected rp from bsrp-info in LHR in l1")
rp = find_rp_from_bsrp_info(tgen, dut, bsr_ip1, group)
assert rp is not {}, "Testcase {} :Failed \n Error {}".format(
tc_name, result)
# Check RP detail in LHR
step("Verify RP in LHR l1")
result = verify_pim_grp_rp_source(tgen, topo, dut, group, "BSR", rp[group])
assert result is True, "Testcase {}:Failed \n Error: {}".format(
tc_name, result)
# Send BSR packet from b2 with same priority
step("Send BSR packet from b2 to FHR with same priority")
result = scapy_send_bsr_raw_packet(tgen, topo, "b2", "f1", "packet1")
assert result is True, "Testcase {} :Failed \n Error {}".format(
tc_name, result)
bsr_ip2 = topo["routers"]["b2"]["bsm"]["bsr_packets"]["packet2"][
"bsr"].split("/")[0]
time.sleep(1)
logger.info("BSR b1:" + bsr_ip1 + " BSR b2:" + bsr_ip2)
# Verify bsr state in FHR
step("Verify if b2 is not chosen as bsr in f1")
result = verify_pim_bsr(tgen, topo, "f1", bsr_ip2, expected=False)
assert (
result is not True
), "Testcase {} : Failed \n " "b2 is chosen as bsr in f1 \n Error: {}".format(
tc_name, result)
# Verify if b1 is still chosen as bsr
step("Verify if b1 is still chosen as bsr in f1")
result = verify_pim_bsr(tgen, topo, "f1", bsr_ip1)
assert result is True, "Testcase {} :Failed \n Error {}".format(
tc_name, result)
# Verify if that rp is installed
step("Verify that same RP in istalled in LHR l1")
result = verify_pim_grp_rp_source(tgen, topo, dut, group, "BSR", rp[group])
assert result is True, "Testcase {}:Failed \n Error: {}".format(
tc_name, result)
step("clear BSM database before moving to next case")
clear_bsrp_data(tgen, topo)
write_test_footer(tc_name)
def test_RP_hash_p0(request):
"""
Verify RP is selected based on hash function, when BSR advertising the group
to RP mapping with same priority
Topology used:
b1_____
|
|
s1-----f1-----i1-----l1----r1
|
______|
b2
b1 - BSR 1
b2 - BSR 2
s1 - Source
f1 - FHR
i1 - Intermediate Router (also RP)
r1 - Receiver
"""
tgen = get_topogen()
tc_name = request.node.name
write_test_header(tc_name)
kill_iperf(tgen)
clear_ip_mroute(tgen)
reset_config_on_routers(tgen)
clear_ip_pim_interface_traffic(tgen, topo)
# Don"t run this test if we have any failure.
if tgen.routers_have_failure():
pytest.skip(tgen.errors)
reset_config_on_routers(tgen)
result = pre_config_to_bsm(tgen, topo, tc_name, "b1", "s1", "r1", "f1",
"i1", "l1", "packet1")
assert result is True, "Testcase {} :Failed \n Error {}".format(
tc_name, result)
result = pre_config_to_bsm(tgen, topo, tc_name, "b2", "s1", "r1", "f1",
"i1", "l1", "packet1")
assert result is True, "Testcase {} :Failed \n Error {}".format(
tc_name, result)
GROUP_ADDRESS = "225.1.1.1"
# Use scapy to send pre-defined packet from senser to receiver
result = scapy_send_bsr_raw_packet(tgen, topo, "b1", "f1", "packet7")
assert result is True, "Testcase {} :Failed \n Error {}".format(
tc_name, result)
bsr_ip = topo["routers"]["b1"]["bsm"]["bsr_packets"]["packet1"][
"bsr"].split("/")[0]
time.sleep(1)
result = iperfSendIGMPJoin(tgen, "r1", GROUP_ADDRESS, join_interval=1)
assert result is True, "Testcase {}:Failed \n Error: {}".format(
tc_name, result)
dut = "l1"
# Verify bsr state in FHR
step("Verify if b1 chosen as BSR in f1")
result = verify_pim_bsr(tgen, topo, "f1", bsr_ip)
assert result is True, "Testcase {} :Failed \n Error {}".format(
tc_name, result)
group = "225.1.1.0/24"
# Find the elected rp from bsrp-info
step("Find the elected rp from bsrp-info in LHR l1")
rp = find_rp_from_bsrp_info(tgen, dut, bsr_ip, group)
assert rp is not {}, "Testcase {} :Failed \n Error {}".format(
tc_name, result)
# Verify if RP with highest hash value is chosen
step("Verify if RP(2.2.2.2) with highest hash value is chosen in l1")
if rp[group] == "2.2.2.2":
result = True
else:
result = "rp expected: 2.2.2.2 got:" + rp[group]
assert result is True, "Testcase {}:Failed \n Error: {}".format(
tc_name, result)
# Check RP detail in LHR
step("Verify RP in LHR")
result = verify_pim_grp_rp_source(tgen, topo, dut, group, "BSR", rp[group])
assert result is True, "Testcase {}:Failed \n Error: {}".format(
tc_name, result)
step("clear BSM database before moving to next case")
clear_bsrp_data(tgen, topo)
write_test_footer(tc_name)
def test_RP_priority_p0(request):
"""
Verify group to RP info is updated correctly, when BSR advertising the
same RP with different priority
Topology used:
b1_____
|
|
s1-----f1-----i1-----l1----r1
|
______|
b2
b1 - BSR 1
b2 - BSR 2
s1 - Source
f1 - FHR
i1 - Intermediate Router (also RP)
r1 - Receiver
"""
tgen = get_topogen()
tc_name = request.node.name
write_test_header(tc_name)
kill_iperf(tgen)
clear_ip_mroute(tgen)
reset_config_on_routers(tgen)
clear_ip_pim_interface_traffic(tgen, topo)
# Don"t run this test if we have any failure.
if tgen.routers_have_failure():
pytest.skip(tgen.errors)
reset_config_on_routers(tgen)
result = pre_config_to_bsm(tgen, topo, tc_name, "b1", "s1", "r1", "f1",
"i1", "l1", "packet1")
assert result is True, "Testcase {} :Failed \n Error {}".format(
tc_name, result)
result = pre_config_to_bsm(tgen, topo, tc_name, "b2", "s1", "r1", "f1",
"i1", "l1", "packet1")
assert result is True, "Testcase {} :Failed \n Error {}".format(
tc_name, result)
GROUP_ADDRESS = "225.1.1.1"
# Use scapy to send pre-defined packet from senser to receiver
step("Send BSR packet from b1 to FHR")
result = scapy_send_bsr_raw_packet(tgen, topo, "b1", "f1", "packet1")
assert result is True, "Testcase {} :Failed \n Error {}".format(
tc_name, result)
bsr_ip = topo["routers"]["b1"]["bsm"]["bsr_packets"]["packet1"][
"bsr"].split("/")[0]
time.sleep(1)
result = iperfSendIGMPJoin(tgen, "r1", GROUP_ADDRESS, join_interval=1)
assert result is True, "Testcase {}:Failed \n Error: {}".format(
tc_name, result)
# Verify bsr state in FHR
step("Verify if b1 is chosen as bsr in f1")
result = verify_pim_bsr(tgen, topo, "f1", bsr_ip)
assert result is True, "Testcase {} :Failed \n Error {}".format(
tc_name, result)
dut = "l1"
group = "225.1.1.0/24"
# Find the elected rp from bsrp-info
step("Find the elected rp from bsrp-info in LHR l1")
rp1 = find_rp_from_bsrp_info(tgen, dut, bsr_ip, group)
assert rp1 is not {}, "Testcase {} :Failed \n Error {}".format(
tc_name, result)
# Check RP detail in LHR
step("Verify RP in LHR l1")
result = verify_pim_grp_rp_source(tgen, topo, dut, group, "BSR",
rp1[group])
assert result is True, "Testcase {}:Failed \n Error: {}".format(
tc_name, result)
# Send BSR packet from b1 after deleting high prio rp for 225.1.1.0/24
step("Send BSM from b1 to FHR deleting high prio rp for 225.1.1.0/24")
result = scapy_send_bsr_raw_packet(tgen, topo, "b1", "f1", "packet6")
assert result is True, "Testcase {} :Failed \n Error {}".format(
tc_name, result)
# Find the elected rp from bsrp-info
step("Find the elected rp from bsrp-info in LHR l1")
rp2 = find_rp_from_bsrp_info(tgen, dut, bsr_ip, group)
assert rp2 is not {}, "Testcase {} :Failed \n Error {}".format(
tc_name, result)
logger.info("RP old: {} RP2 new: {} ".format(rp1[group], rp2[group]))
# Verify is the rp is different now
assert rp1[group] != rp2[group], "Testcase {} :Failed \n Error {}".format(
tc_name, result)
rp_add1 = rp1[group]
rp_add2 = rp2[group]
# Verify if that rp is installed
step("Verify new RP in LHR installed")
result = verify_pim_grp_rp_source(tgen, topo, dut, group, "BSR", rp_add2)
assert result is True, "Testcase {}:Failed \n Error: {}".format(
tc_name, result)
# Send BSR packet from b1 after putting back high prio rp for 225.1.1.0/24
step("Send BSM from b1 to FHR put back old high prio rp for 225.1.1.0/24")
result = scapy_send_bsr_raw_packet(tgen, topo, "b1", "f1", "packet1")
assert result is True, "Testcase {} :Failed \n Error {}".format(
tc_name, result)
# Find the elected rp from bsrp-info
step("Find the elected rp from bsrp-info in LHR")
rp2 = find_rp_from_bsrp_info(tgen, dut, bsr_ip, group)
assert rp2 is not {}, "Testcase {} :Failed \n Error : RP not Found".format(
tc_name)
# Verify is the rp is different now
step("Verify now old RP is elected again")
assert (
rp_add1 == rp2[group]
), "Testcase {} :Failed \n Error : rp expected {} rp received {}".format(
tc_name, rp_add1, rp2[group] if group in rp2 else None)
# Verify if that rp is installed
step("Verify new RP in LHR installed")
result = verify_pim_grp_rp_source(tgen, topo, dut, group, "BSR", rp_add1)
assert result is True, "Testcase {}:Failed \n Error: {}".format(
tc_name, result)
step("clear BSM database before moving to next case")
clear_bsrp_data(tgen, topo)
write_test_footer(tc_name)
def test_overlapping_group_p0(request):
"""
Verify group to RP updated correctly on FRR router, when BSR advertising
the overlapping group address
Topology used:
b1_____
|
|
s1-----f1-----i1-----l1----r1
|
______|
b2
b1 - BSR 1
b2 - BSR 2
s1 - Source
f1 - FHR
i1 - Intermediate Router (also RP)
r1 - Receiver
"""
tgen = get_topogen()
tc_name = request.node.name
write_test_header(tc_name)
kill_iperf(tgen)
clear_ip_mroute(tgen)
reset_config_on_routers(tgen)
clear_ip_pim_interface_traffic(tgen, topo)
# Don"t run this test if we have any failure.
if tgen.routers_have_failure():
pytest.skip(tgen.errors)
reset_config_on_routers(tgen)
result = pre_config_to_bsm(tgen, topo, tc_name, "b1", "s1", "r1", "f1",
"i1", "l1", "packet1")
assert result is True, "Testcase {} :Failed \n Error {}".format(
tc_name, result)
result = pre_config_to_bsm(tgen, topo, tc_name, "b2", "s1", "r1", "f1",
"i1", "l1", "packet1")
assert result is True, "Testcase {} :Failed \n Error {}".format(
tc_name, result)
GROUP_ADDRESS = "225.1.1.1"
# Use scapy to send pre-defined packet from senser to receiver
step("Send BSR packet from b1 to FHR")
result = scapy_send_bsr_raw_packet(tgen, topo, "b1", "f1", "packet4")
assert result is True, "Testcase {} :Failed \n Error {}".format(
tc_name, result)
bsr_ip = topo["routers"]["b1"]["bsm"]["bsr_packets"]["packet1"][
"bsr"].split("/")[0]
time.sleep(1)
result = iperfSendIGMPJoin(tgen, "r1", GROUP_ADDRESS, join_interval=1)
assert result is True, "Testcase {}:Failed \n Error: {}".format(
tc_name, result)
# Verify bsr state in FHR
step("Verify if b1 is chosen as bsr in f1")
result = verify_pim_bsr(tgen, topo, "f1", bsr_ip)
assert result is True, "Testcase {} :Failed \n Error {}".format(
tc_name, result)
dut = "l1"
group1 = "225.1.1.1/32"
# Find the elected rp from bsrp-info fro group 225.1.1.1/32
step("Find the elected rp from bsrp-info in LHR for 225.1.1.1/32")
rp1 = find_rp_from_bsrp_info(tgen, dut, bsr_ip, group1)
assert rp1 is not {}, "Testcase {} :Failed \n Error {}".format(
tc_name, result)
group2 = "225.1.1.0/24"
# Find the elected rp from bsrp-info fro group 225.1.1.0/24
step("Find the elected rp from bsrp-info in LHR for 225.1.1.0/24")
rp2 = find_rp_from_bsrp_info(tgen, dut, bsr_ip, group2)
assert rp2 is not {}, "Testcase {} :Failed \n Error {}".format(
tc_name, result)
iif = "l1-i1-eth0"
# Verify upstream rpf for 225.1.1.1 is chosen as rp1
step("Verify upstream rpf for 225.1.1.1 is chosen as rp1 in l1")
result = verify_ip_pim_upstream_rpf(tgen, topo, dut, iif, GROUP_ADDRESS,
rp1)
assert result is True, "Testcase {}:Failed \n Error: {}".format(
tc_name, result)
# Send BSR packet from b1 with rp for 225.1.1.1/32 removed
step("Send BSR packet from b1 with rp for 225.1.1.1/32 removed")
result = scapy_send_bsr_raw_packet(tgen, topo, "b1", "f1", "packet5")
assert result is True, "Testcase {} :Failed \n Error {}".format(
tc_name, result)
# Verify upstream rpf for 225.1.1.1 is chosen as rp1
step("Verify upstream rpf for 225.1.1.1 is chosen as rp2 in l1")
result = verify_ip_pim_upstream_rpf(tgen, topo, dut, iif, GROUP_ADDRESS,
rp2)
assert result is True, "Testcase {}:Failed \n Error: {}".format(
tc_name, result)
# Verify IIF/OIL in pim state
step("Verify iif is installed after rp change in l1")
oil = "l1-r1-eth1"
result = verify_pim_state(tgen, dut, iif, oil, GROUP_ADDRESS)
assert result is True, "Testcase {}:Failed \n Error: {}".format(
tc_name, result)
step("clear BSM database before moving to next case")
clear_bsrp_data(tgen, topo)
write_test_footer(tc_name)
def test_starg_mroute_p0(request):
"""
1. Verify (*,G) mroute detail on FRR router after BSM rp installed
Topology used:
b1_____
|
|
s1-----f1-----i1-----l1----r1
|
______|
b2
b1 - BSR 1
b2 - BSR 2
s1 - Source
f1 - FHR
i1 - Intermediate Router (also RP)
r1 - Receiver
"""
tgen = get_topogen()
tc_name = request.node.name
write_test_header(tc_name)
kill_iperf(tgen)
clear_ip_mroute(tgen)
reset_config_on_routers(tgen)
clear_ip_pim_interface_traffic(tgen, topo)
# Don"t run this test if we have any failure.
if tgen.routers_have_failure():
pytest.skip(tgen.errors)
reset_config_on_routers(tgen)
result = pre_config_to_bsm(tgen, topo, tc_name, "b1", "s1", "r1", "f1",
"i1", "l1", "packet1")
assert result is True, "Testcase {} :Failed \n Error {}".format(
tc_name, result)
result = pre_config_to_bsm(tgen, topo, tc_name, "b2", "s1", "r1", "f1",
"i1", "l1", "packet1")
assert result is True, "Testcase {} :Failed \n Error {}".format(
tc_name, result)
GROUP_ADDRESS = "226.1.1.1"
# Use scapy to send pre-defined packet from senser to receiver
result = scapy_send_bsr_raw_packet(tgen, topo, "b1", "f1", "packet1")
assert result is True, "Testcase {} :Failed \n Error {}".format(
tc_name, result)
bsr_ip = topo["routers"]["b1"]["bsm"]["bsr_packets"]["packet1"][
"bsr"].split("/")[0]
time.sleep(1)
result = iperfSendIGMPJoin(tgen, "r1", GROUP_ADDRESS, join_interval=1)
assert result is True, "Testcase {}:Failed \n Error: {}".format(
tc_name, result)
# Verify bsr state in FHR
result = verify_pim_bsr(tgen, topo, "f1", bsr_ip)
assert result is True, "Testcase {} :Failed \n Error {}".format(
tc_name, result)
# Check igmp groups
step("Verify IGMP groups in LHR l1")
dut = "l1"
intf = "l1-r1-eth1"
result = verify_igmp_groups(tgen, dut, intf, GROUP_ADDRESS)
assert result is True, "Testcase {}:Failed \n Error: {}".format(
tc_name, result)
group = "226.1.1.1/32"
src_addr = "*"
# Find the elected rp from bsrp-info
step("Find the elected rp from bsrp-info in LHR in l1")
rp = find_rp_from_bsrp_info(tgen, dut, bsr_ip, group)
assert rp is not {}, "Testcase {} :Failed \n Error {}".format(
tc_name, result)
# Check RP detail in LHR
step("Verify RP in LHR in l1")
result = verify_pim_grp_rp_source(tgen, topo, dut, group, "BSR", rp[group])
assert result is True, "Testcase {}:Failed \n Error: {}".format(
tc_name, result)
# Verify join state and join timer
step("Verify join state and join timer in l1")
iif = "l1-i1-eth0"
result = verify_join_state_and_timer(tgen, dut, iif, src_addr,
GROUP_ADDRESS)
assert result is True, "Testcase {}:Failed \n Error: {}".format(
tc_name, result)
# Verify upstream IIF interface
step("Verify upstream IIF interface in l1")
result = verify_upstream_iif(tgen, dut, iif, src_addr, GROUP_ADDRESS)
assert result is True, "Testcase {}:Failed \n Error: {}".format(
tc_name, result)
# Verify IIF/OIL in pim state
oil = "l1-r1-eth1"
result = verify_pim_state(tgen, dut, iif, oil, GROUP_ADDRESS)
assert result is True, "Testcase {}:Failed \n Error: {}".format(
tc_name, result)
# Verify ip mroute
step("Verify ip mroute in l1")
src_addr = "*"
result = verify_ip_mroutes(tgen, dut, src_addr, GROUP_ADDRESS, iif, oil)
assert result is True, "Testcase {}:Failed \n Error: {}".format(
tc_name, result)
# Remove the group rp mapping and send bsm
step(
"Remove the grp-rp mapping by sending bsm with hold time 0 for grp-rp")
result = scapy_send_bsr_raw_packet(tgen, topo, "b1", "f1", "packet2")
assert result is True, "Testcase {} :Failed \n Error {}".format(
tc_name, result)
# Check RP unreachable
step("Check RP unreachability in l1")
iif = "Unknown"
result = verify_upstream_iif(tgen,
dut,
iif,
src_addr,
GROUP_ADDRESS,
joinState="NotJoined")
assert result is True, "Testcase {}:Failed \n Error: {}".format(
tc_name, result)
# Verify that it is not installed
step("Verify that iif is not installed in l1")
iif = "<iif?>"
result = verify_pim_state(tgen,
dut,
iif,
oil,
GROUP_ADDRESS,
installed_fl=0)
assert result is True, "Testcase {}:Failed \n Error: {}".format(
tc_name, result)
# Verify mroute not installed
step("Verify mroute not installed in l1")
result = verify_ip_mroutes(tgen,
dut,
src_addr,
GROUP_ADDRESS,
iif,
oil,
retry_timeout=20,
expected=False)
assert (
result is not True
), "Testcase {} : Failed \n " "mroute installed in l1 \n Error: {}".format(
tc_name, result)
# Send BSM again to configure rp
step("Add back RP by sending BSM from b1")
result = scapy_send_bsr_raw_packet(tgen, topo, "b1", "f1", "packet1")
assert result is True, "Testcase {} :Failed \n Error {}".format(
tc_name, result)
# Verify that (*,G) installed in mroute again
iif = "l1-i1-eth0"
result = verify_ip_mroutes(tgen, dut, src_addr, GROUP_ADDRESS, iif, oil)
assert result is True, "Testcase {}:Failed \n Error: {}".format(
tc_name, result)
step("clear BSM database before moving to next case")
clear_bsrp_data(tgen, topo)
write_test_footer(tc_name)
def test_RP_with_all_ip_octet_p1(request):
"""
Verify when candidate RP advertised with 32 mask length
and contain all the contacts
Topology used:
b1_____
|
|
s1-----f1-----i1-----l1----r1
|
______|
b2
b1 - BSR 1
b2 - BSR 2
s1 - Source
f1 - FHR
i1 - Intermediate Router (also RP)
r1 - Receiver
"""
tgen = get_topogen()
tc_name = request.node.name
write_test_header(tc_name)
kill_iperf(tgen)
clear_ip_mroute(tgen)
reset_config_on_routers(tgen)
clear_ip_pim_interface_traffic(tgen, topo)
# Don"t run this test if we have any failure.
if tgen.routers_have_failure():
pytest.skip(tgen.errors)
step("pre-configure BSM packet")
result = pre_config_to_bsm(tgen, topo, tc_name, "b1", "s1", "r1", "f1",
"i1", "l1", "packet1")
assert result is True, "Testcase {} :Failed \n Error {}".format(
tc_name, result)
step(
"Send the IGMP group (225.100.100.100) from receiver connected to FRR")
GROUP_ADDRESS = "225.200.100.100"
# Use scapy to send pre-defined packet from senser to receiver
step("Configure cisco-1 as BSR1")
result = scapy_send_bsr_raw_packet(tgen, topo, "b1", "f1", "packet8")
assert result is True, "Testcase {} :Failed \n Error {}".format(
tc_name, result)
bsr_ip = topo["routers"]["b1"]["bsm"]["bsr_packets"]["packet8"][
"bsr"].split("/")[0]
time.sleep(1)
result = iperfSendIGMPJoin(tgen, "r1", GROUP_ADDRESS, join_interval=1)
assert result is True, "Testcase {}:Failed \n Error: {}".format(
tc_name, result)
dut = "l1"
step(
"Groups are shown with candidate RP with correct mask length 'show ip pim bsrp-info'"
)
step("Verify if b1 chosen as BSR in f1")
result = verify_pim_bsr(tgen, topo, "f1", bsr_ip)
assert result is True, "Testcase {} :Failed \n Error {}".format(
tc_name, result)
group = topo["routers"]["b1"]["bsm"]["bsr_packets"]["packet9"]["group"]
step("Find the elected rp from bsrp-info in LHR l1")
rp = find_rp_from_bsrp_info(tgen, dut, bsr_ip, group)
assert rp is not {}, "Testcase {} :Failed \n Error {}".format(
tc_name, result)
step("Verify RP in LHR")
result = verify_pim_grp_rp_source(tgen, topo, dut, group, "BSR", rp[group])
assert result is True, "Testcase {}:Failed \n Error: {}".format(
tc_name, result)
step("clear BSM database before moving to next case")
clear_bsrp_data(tgen, topo)
write_test_footer(tc_name)
def test_BSM_fragmentation_p1(request):
"""
Verify fragmentation of bootstrap message
Topology used:
b1_____
|
|
s1-----f1-----i1-----l1----r1
|
______|
b2
b1 - BSR 1
b2 - BSR 2
s1 - Source
f1 - FHR
i1 - Intermediate Router (also RP)
r1 - Receiver
"""
tgen = get_topogen()
tc_name = request.node.name
write_test_header(tc_name)
kill_iperf(tgen)
clear_ip_mroute(tgen)
reset_config_on_routers(tgen)
clear_ip_pim_interface_traffic(tgen, topo)
reset_config_on_routers(tgen)
# Don"t run this test if we have any failure.
if tgen.routers_have_failure():
pytest.skip(tgen.errors)
result = pre_config_to_bsm(tgen, topo, tc_name, "b1", "s1", "r1", "f1",
"i1", "l1", "packet1")
assert result is True, "Testcase {} :Failed \n Error {}".format(
tc_name, result)
result = pre_config_to_bsm(tgen, topo, tc_name, "b2", "s1", "r1", "f1",
"i1", "l1", "packet1")
assert result is True, "Testcase {} :Failed \n Error {}".format(
tc_name, result)
GROUP_ADDRESS = "225.1.1.1"
bsr_ip = topo["routers"]["b1"]["bsm"]["bsr_packets"]["packet1"][
"bsr"].split("/")[0]
step("Send BSM and verify if all routers have same bsrp before fragment")
result = scapy_send_bsr_raw_packet(tgen, topo, "b1", "f1", "packet1")
# Verify bsr state in FHR
step("Verify if b1 chosen as BSR in f1")
result = verify_pim_bsr(tgen, topo, "f1", bsr_ip)
assert result is True, "Testcase {} :Failed \n Error {}".format(
tc_name, result)
fhr_node = tgen.routers()["f1"]
inter_node = tgen.routers()["i1"]
lhr_node = tgen.routers()["l1"]
# Verify if bsrp list is same across f1, i1 and l1
step("Verify if bsrp list is same across f1, i1 and l1")
bsrp_f1 = fhr_node.vtysh_cmd("show ip pim bsrp-info json", isjson=True)
logger.info("show_ip_pim_bsrp_info_json f1: \n %s", bsrp_f1)
bsrp_i1 = inter_node.vtysh_cmd("show ip pim bsrp-info json", isjson=True)
logger.info("show_ip_pim_bsrp_info_json i1: \n %s", bsrp_i1)
bsrp_l1 = lhr_node.vtysh_cmd("show ip pim bsrp-info json", isjson=True)
logger.info("show_ip_pim_bsrp_info_json l1: \n %s", bsrp_l1)
if bsrp_f1 == bsrp_l1:
result = True
else:
result = "bsrp info in f1 is not same in l1"
assert result is True, "Testcase {} :Failed \n Error {}".format(
tc_name, result)
# set mtu of fhr(f1) to i1 interface to 100 so that bsm fragments
step("set mtu of fhr(f1) to i1 interface to 100 so that bsm fragments")
fhr_node.run("ifconfig f1-i1-eth2 mtu 100")
inter_node.run("ifconfig i1-f1-eth0 mtu 100")
# Use scapy to send pre-defined packet from senser to receiver
result = scapy_send_bsr_raw_packet(tgen, topo, "b1", "f1", "packet2")
assert result is True, "Testcase {} :Failed \n Error {}".format(
tc_name, result)
result = iperfSendIGMPJoin(tgen, "r1", GROUP_ADDRESS, join_interval=1)
assert result is True, "Testcase {}:Failed \n Error: {}".format(
tc_name, result)
# Verify bsr state in FHR
step("Verify if b1 chosen as BSR")
result = verify_pim_bsr(tgen, topo, "f1", bsr_ip)
assert result is True, "Testcase {} :Failed \n Error {}".format(
tc_name, result)
# Verify if bsrp list is same across f1, i1 and l1
step(
"Verify if bsrp list is same across f1, i1 and l1 after fragmentation")
bsrp_f1 = fhr_node.vtysh_cmd("show ip pim bsrp-info json", isjson=True)
logger.info("show_ip_pim_bsrp_info_json f1: \n %s", bsrp_f1)
bsrp_i1 = inter_node.vtysh_cmd("show ip pim bsrp-info json", isjson=True)
logger.info("show_ip_pim_bsrp_info_json i1: \n %s", bsrp_i1)
bsrp_l1 = lhr_node.vtysh_cmd("show ip pim bsrp-info json", isjson=True)
logger.info("show_ip_pim_bsrp_info_json l1: \n %s", bsrp_l1)
if bsrp_f1 == bsrp_l1:
result = True
else:
result = "bsrp info in f1 is not same in l1"
assert result is True, "Testcase {} :Failed \n Error {}".format(
tc_name, result)
step("clear BSM database before moving to next case")
clear_bsrp_data(tgen, topo)
write_test_footer(tc_name)