def rebuld_loop(no_of_iterations):
p2 = multiprocessing.current_process()
logger.info("Starting : %s : %s" % (p2.name, p2.pid))
print "Starting", p2.name, p2.pid
for i in range(no_of_iterations):
mediaList = media_group.get_media_group_disk()
media = [mediaList[0], mediaList[1]]
status = power_off_drive(media, pvlLibHandle)
time.sleep(30)
status = power_on_drive(media, pvlLibHandle)
time.sleep(120)
status = media_group.rebuild_media_group()
logger.info(status)
time.sleep(60)
def pds_rollback_with_rebuild_20():
#objects initialization & Authentication
log = PvltLogger(inspect.stack()[0][3],'INFO')
logger = log.logger
host = HostOps(HOST[0])
fio = FioUtils()
pvlLibHandle = pvlclient.New("2.0",CHASSIS_IP,logger=logger)
result = pvlLibHandle.auth.login(user=CHASSIS_USER,password=CHASSIS_PASS)
#calling base function to populate the objects
media_group,vol = base_function(pvlLibHandle,logger)
# assign the vol
ports= get_volume_network_map(pvlLibHandle, ZONE)
logger.info("Assigning vols ")
status = vol.assign_volume(ports,hostnqn=[])
assert(status == True)
# connet to the host
status = host.connect_volume(vol)
assert(status == 0)
# powring off two drives
mediaList = media_group.get_media_group_disk()
media = [mediaList[0]] + [mediaList[1]]
logger.info("Powering OFF drive : %s"%media)
status = power_off_drive([media_group.md_disk[1],media_group.md_disk[0]],pvlLibHandle)
# write on the voluem
logger.info("Starting overwrite on the vol-seq_write")
kwargs = {'offset':"0",'size':'40%',"verify_pattern":"0xABCD","verify_interval":4096,"do_verify":1}
status,response=fio.seq_write([vol], host, kwargs)
assert (status==0)
#Taking snaphost
logger.info("Taking snapshot :%s"%SNAP_PREFIX)
snapshot = SnapShotOps(SNAP_PREFIX,volobj=vol,create=True)
assert(snapshot != None)
# poweron the drives
logger.info("Powering ON drive : %s"%media)
status = power_on_drive(media,pvlLibHandle)
time.sleep(60)
# start rebuild
logger.info("Start rebuild 2>0")
status=media_group.synchronous_rebuild_media_group()
# overwrite on the volume
logger.info("Starting overwrite on the vol-seq_write")
kwargs = {'offset':"0",'size':'40%',"verify_pattern":"0xffff","verify_interval":4096,"do_verify":1}
status,response=fio.seq_write([vol], host, kwargs)
assert (status==0)
# disconenct the vol
logger.info("disconnecting the vol from the host")
status = host.disconnect_volume(vol)
time.sleep(10)
# unassign the vol
status = vol.unassign_volume()
assert(status == True)
# restore the volumes using s2
status = vol.vol_rollback(snapshot,backup="true")
assert(status == True)
# connect the vol & verify the data
logger.info("Assigning vols ")
status = vol.assign_volume(ports,hostnqn=[])
assert(status == True)
logger.info("connecting the vol")
status = host.connect_volume(vol)
assert(status==0)
logger.info("Reading from the raw device")
kwargs = {'offset':"0",'size':'40%',"verify_pattern":"0xABCD","verify_interval":4096,"do_verify":1}
status,response=fio.seq_read([vol], host, kwargs)
assert (status==0)
# delete forensic snapshot
status = snapshot.delete_all_forensic_snap()
assert(status == True)
# disconnect the vol to run teardown
logger.info("disconnecting the vol from the host")
status = host.disconnect_volume(vol)
time.sleep(10)
def pds_vol_restore_sanity():
host = HostOps(HOST[0])
fio = FioUtils()
# give function name as log file name
log = PvltLogger("Volume_restore", 'INFO')
logger = log.logger
name = MEDIA_GROUP_NAME
pvlLibHandle = pvlclient.New("2.0", CHASSIS_IP, logger=logger)
result = pvlLibHandle.auth.login(user=CHASSIS_USER, password=CHASSIS_PASS)
## velidation for prerequisits
drv_cnt = get_active_drive_count(ZONE, pvlLibHandle)
logger.info(ZONE)
logger.info(drv_cnt)
if drv_cnt < 9:
logger.error('Not sufficient drives active drive count=%s' % drv_cnt)
sys.exit()
if VOL_CNT > 1:
logger.error(
'Update the configuration As this test is currently written for 1 vol only'
)
sys.exit()
md_type = MEDIA_GROUP_TYPE
## creating mediaGroup
logger.info("Creating a MediaGroup")
media_group = MediaGroupOps(pvlLibHandle, name, ZONE, md_type, create=True)
assert (media_group != None)
## creaing volumes
logger.info("Creating voluems")
#vol_list = []
volname = VOL_PREFIX
vol = VolumeOps(md=media_group,
name=volname,
size=VOL_SIZE,
vol_res=VOL_RES,
flavor=FLAVOR,
create=True)
assert (vol != None)
#Creating a snapshot
snap_name = "s1"
logger.info("Creating a snapshot : %s" % snap_name)
snapshot = SnapShotOps(snap_name, volobj=vol, create=True)
assert (snapshot != None)
################################ 1 Vol restore for unassigned volume
# Restore the vol using its snapshot
#status = snapshot.vol_restore()
#assert(status == True)
#time.sleep(60)
#print("1 Vol restore for unassigned volume: PASS")
################################ 2 Vol restore after assign volume
ports = get_two_port_diff_ctlr(ZONE)
logger.info("Assigning vols ")
status = vol.assign_volume(ports, hostnqn=[])
assert (status == True)
#status = snapshot.vol_restore()
#assert(status == True)
#time.sleep(60)
#print("2 Vol restore after assign volume:PASS")
################################## delete s1 and its child snapshot
# Need to write forensic snapshots deletion code
################################## 3. Vol restore after 5% IO on the vol
status = host.connect_volume(vol)
time.sleep(10)
assert (status == 0)
#start fio on all the volumes
logger.info("Starting write on the vol-seq_write")
kwargs = {
'offset': "0",
'size': '5%',
"verify_pattern": "0xABCD",
"verify_interval": 4096,
"do_verify": 1
}
status, response = fio.seq_write([vol], host, kwargs)
assert (status == 0)
# Taking snaphost
snap_name = "s2"
logger.info("Taking snapshot :%s" % snap_name)
snapshot = SnapShotOps(snap_name, volobj=vol, create=True)
assert (snapshot != None)
# Write on remaning space of the volumes
logger.info("Starting write on other space of the vol ")
kwargs = {
'offset': "45g",
'size': '5g',
"verify_pattern": "0xABCD",
"verify_interval": 4096,
"do_verify": 1
}
status, response = fio.rand_read_write([vol], host, kwargs)
assert (status == 0)
# disconnect the vol
logger.info("disconnecting the vol from the host")
status = host.disconnect_volume(vol)
time.sleep(10)
assert (status == 0)
# restore using latest snapshot
#status = snapshot.vol_restore()
#assert(status == True)
#time.sleep(60)
# cheking data integrity by rading the volumes data
# connecting the vol
logger.info("connecting the vol")
status = host.connect_volume(vol)
time.sleep(10)
assert (status == 0)
logger.info("Reading from the raw device")
kwargs = {
'offset': "0",
'size': '5%',
"verify_pattern": "0xABCD",
"verify_interval": 4096,
"do_verify": 1
}
status, response = fio.seq_read([vol], host, kwargs)
assert (status == 0)
print("3. Vol restore after 5% IO on the vol:PASS")
################################ 4. Vol restore for degraded volumes
# Power off one drive
mediaList = media_group.get_media_group_disk()
media = [mediaList[0]]
logger.info("Powering off drive : %s" % media)
status = power_off_drive(media, pvlLibHandle)
time.sleep(30)
# overwrite on the volume
logger.info("Starting overwrite on the vol-seq_write")
kwargs = {
'offset': "0",
'size': '5%',
"verify_pattern": "0xABCD",
"verify_interval": 4096,
"do_verify": 1
}
status, response = fio.seq_write([vol], host, kwargs)
assert (status == 0)
# disconenct the vol
logger.info("disconnecting the vol from the host")
status = host.disconnect_volume(vol)
time.sleep(10)
assert (status == 0)
# restore the volumes using s2
#status = snapshot.vol_restore()
#assert(status == True)
#time.sleep(60)
# connect the vol & verify the data
logger.info("connecting the vol")
status = host.connect_volume(vol)
time.sleep(10)
assert (status == 0)
logger.info("Reading from the raw device")
kwargs = {
'offset': "0",
'size': '5%',
"verify_pattern": "0xABCD",
"verify_interval": 4096,
"do_verify": 1
}
status, response = fio.seq_read([vol], host, kwargs)
print("4. Vol restore for degraded volumes:PASS")
################################ 5. Vol restore for critical voluems
# poweroff one more drive
media = [mediaList[1]]
logger.info("Powering off drive : %s" % media)
status = power_off_drive(media, pvlLibHandle)
time.sleep(30)
# overwrite on the volume
logger.info("Starting overwrite on the vol-seq_write")
kwargs = {
'offset': "0",
'size': '5%',
"verify_pattern": "0xABCD",
"verify_interval": 4096,
"do_verify": 1
}
status, response = fio.seq_write([vol], host, kwargs)
assert (status == 0)
# disconenct the vol
logger.info("disconnecting the vol from the host")
status = host.disconnect_volume(vol)
time.sleep(10)
assert (status == 0)
# restore the volumes using s2
#status = snapshot.vol_restore()
#assert(status == True)
#time.sleep(60)
# connect the vol & verify the data
logger.info("connecting the vol")
status = host.connect_volume(vol)
time.sleep(10)
assert (status == 0)
logger.info("Reading from the raw device")
kwargs = {
'offset': "0",
'size': '5%',
"verify_pattern": "0xABCD",
"verify_interval": 4096,
"do_verify": 1
}
status, response = fio.seq_read([vol], host, kwargs)
print("5. Vol restore for critical voluems:PASS")
################################ 6. Vol restore with rebuild (2>1)
# Poweron one drive and start the rebuild
media = [mediaList[0]]
logger.info("Powering ON drive : %s" % media)
status = power_on_drive(media, pvlLibHandle)
time.sleep(120)
logger.info("Start rebuild 2>1")
status = media_group.rebuild_media_group()
# overwrite on the volume
logger.info("Starting overwrite on the vol-seq_write")
kwargs = {
'offset': "0",
'size': '5%',
"verify_pattern": "0xABCD",
"verify_interval": 4096,
"do_verify": 1
}
status, response = fio.seq_write([vol], host, kwargs)
assert (status == 0)
# disconenct the vol
logger.info("disconnecting the vol from the host")
status = host.disconnect_volume(vol)
time.sleep(10)
assert (status == 0)
# restore the volumes using s2
#status = snapshot.vol_restore()
#assert(status == True)
#time.sleep(60)
# connect the vol & verify the data
logger.info("connecting the vol")
status = host.connect_volume(vol)
time.sleep(10)
assert (status == 0)
logger.info("Reading from the raw device")
kwargs = {
'offset': "0",
'size': '5%',
"verify_pattern": "0xABCD",
"verify_interval": 4096,
"do_verify": 1
}
status, response = fio.seq_read([vol], host, kwargs)
print("6. Vol restore with rebuild (2>1):PASS")
################################ 7. Vol restore with rebuild (1>0)
media = [mediaList[1]]
logger.info("Powering ON drive : %s" % media)
status = power_on_drive(media, pvlLibHandle)
time.sleep(120)
logger.info("Start rebuild 1>0")
status = media_group.rebuild_media_group()
# overwrite on the volume
logger.info("Starting overwrite on the vol-seq_write")
kwargs = {
'offset': "0",
'size': '5%',
"verify_pattern": "0xABCD",
"verify_interval": 4096,
"do_verify": 1
}
status, response = fio.seq_write([vol], host, kwargs)
assert (status == 0)
# disconenct the vol
logger.info("disconnecting the vol from the host")
status = host.disconnect_volume(vol)
time.sleep(10)
assert (status == 0)
# restore the volumes using s2
#status = snapshot.vol_restore()
#assert(status == True)
#time.sleep(60)
# connect the vol & verify the data
logger.info("connecting the vol")
status = host.connect_volume(vol)
time.sleep(10)
assert (status == 0)
logger.info("Reading from the raw device")
kwargs = {
'offset': "0",
'size': '5%',
"verify_pattern": "0xABCD",
"verify_interval": 4096,
"do_verify": 1
}
status, response = fio.seq_read([vol], host, kwargs)
print("7. Vol restore with rebuild (1>0):PASS")
################################ 8. Vol restore with rebuild (2>0)
media = [media_group.md_disk[1], media_group.md_disk[0]]
logger.info("Powering OFF drive : %s" % media)
status = power_off_drive([media_group.md_disk[1], media_group.md_disk[0]],
pvlLibHandle)
time.sleep(60)
logger.info("Powering ON drive : %s" % media)
status = power_on_drive([media_group.md_disk[1], media_group.md_disk[0]],
pvlLibHandle)
time.sleep(60)
# start rebuild
logger.info("Start rebuild 2>0")
status = media_group.rebuild_media_group()
# overwrite on the volume
logger.info("Starting overwrite on the vol-seq_write")
kwargs = {
'offset': "0",
'size': '5%',
"verify_pattern": "0xABCD",
"verify_interval": 4096,
"do_verify": 1
}
status, response = fio.seq_write([vol], host, kwargs)
assert (status == 0)
# disconenct the vol
logger.info("disconnecting the vol from the host")
status = host.disconnect_volume(vol)
time.sleep(10)
assert (status == 0)
# restore the volumes using s2
#status = snapshot.vol_restore()
#assert(status == True)
#time.sleep(60)
# connect the vol & verify the data
logger.info("connecting the vol")
status = host.connect_volume(vol)
time.sleep(10)
assert (status == 0)
logger.info("Reading from the raw device")
kwargs = {
'offset': "0",
'size': '5%',
"verify_pattern": "0xABCD",
"verify_interval": 4096,
"do_verify": 1
}
status, response = fio.seq_read([vol], host, kwargs)
print("8. Vol restore with rebuild (2>0):PASS")
################################ 9. Vol restore with clone is connected to the host
# overwrite on the volume
logger.info("Starting overwrite on the vol-seq_write")
kwargs = {
'offset': "0",
'size': '5%',
"verify_pattern": "0xABCD",
"verify_interval": 4096,
"do_verify": 1
}
status, response = fio.seq_write([vol], host, kwargs)
assert (status == 0)
# create clone
clone_list = []
clone_name = str(snap_name) + str("_c1")
logger.info("Creating clone name : %s" % clone_name)
cloneObj = CloneOps(clone_name, snapshot, create=True)
clone_list.append(cloneObj)
# assign clone
logger.info("Assigning clone %s to contollers" % clone_name)
assign = cloneObj.assign_clone(ports, hostnqn=[])
# connect clone to the host
logger.info("Connecting clone %s to the host" % clone_name)
status = host.connect_volume(cloneObj)
time.sleep(10)
assert (status == 0)
# start IO on the clone
logger.info("Staring write IO to the clone %s" % clone_name)
kwargs = {
'offset': "0",
'size': '5%',
"verify_pattern": "0xABCD",
"verify_interval": 4096,
"do_verify": 1
}
status, response = fio.seq_write(clone_list, host, kwargs)
assert (status == 0)
# disconenct the vol
logger.info("disconnecting the vol from the host")
status = host.disconnect_volume(vol)
time.sleep(10)
assert (status == 0)
# restore the volumes using s2
#status = snapshot.vol_restore()
#assert(status == True)
#time.sleep(60)
# connect the vol & verify the data
logger.info("connecting the vol")
status = host.connect_volume(vol)
time.sleep(10)
assert (status == 0)
logger.info("Reading from the raw device")
kwargs = {
'offset': "0",
'size': '5%',
"verify_pattern": "0xABCD",
"verify_interval": 4096,
"do_verify": 1
}
status, response = fio.seq_read([vol], host, kwargs)
print("9. Vol restore with clone is connected to the host:PASS")
################################ 1. FIO on online volume
#start fio on all the volumes with BS:4k/IODEPTH:128
for blk_size in blk_list:
for io_type in ioitems:
logger.info("Starting IO Online volumes : IO_TYPE=%s :BS=%s"%(io_type,blk_size))
kwargs = {'offset':"0",'bs':blk_size,'size':'5%',"verify_pattern":"0xABCD","verify_interval":4096,"do_verify":1}
status,response=fio.generic_fio(io_type,[vol], host, kwargs)
assert (status == 0)
logger.info("Completed IO for Online volume with:IO_TYPE=%s||BS=%s"%(io_type,blk_size))
################################ 2. IO on degraded volumes
# Power off one drive
media = media_group.md_disk[0]
#media = [mediaList[0]]
logger.info("Powering off drive : %s"%media)
status = power_off_drive([media],pvlLibHandle)
time.sleep(30)
# overwrite on the volume
for blk_size in blk_list:
for io_type in ioitems:
logger.info("Starting IO Online volumes : IO_TYPE=%s :BS=%s"%(io_type,blk_size))
kwargs = {'offset':"0",'bs':blk_size,'size':'5%',"verify_pattern":"0xABCD","verify_interval":4096,"do_verify":1}
status,response=fio.generic_fio(io_type,[vol], host, kwargs)
assert (status == 0)
logger.info("Completed IO for degraded volume with:IO_TYPE=%s||BS=%s"%(io_type,blk_size))
################################ 3. IO on critical voluems
# poweroff one more drive
#media = [mediaList[1]]
media = media_group.md_disk[1]
logger.info("Powering off drive : %s"%media)
def pds_vol_restore_sanity():
host = HostOps(HOST[0])
fio = FioUtils()
# give function name as log file name
log = PvltLogger("Volume_restore", 'INFO')
logger = log.logger
name = MEDIA_GROUP_NAME
pvlLibHandle = pvlclient.New("2.0", CHASSIS_IP, logger=logger)
result = pvlLibHandle.auth.login(user=CHASSIS_USER, password=CHASSIS_PASS)
## creating mediaGroup
drv_cnt = get_active_drive_count(ZONE, pvlLibHandle)
logger.info(ZONE)
logger.info(drv_cnt)
if drv_cnt < 9:
logger.error('Not sufficient drives active drive count=%s' % drv_cnt)
#assert(drv_cnt > 8 )
# take it from config
md_type = 'RAID-0 (18+0)' if drv_cnt == 18 else 'RAID-6 (7+2)'
logger.info("Creating a MediaGroup")
md = MediaGroupOps(pvlLibHandle, name, ZONE, md_type, create=False)
media_group = md
assert (md != None)
## creaing volumes
logger.info("Creating voluems")
vol_list = []
for i in range(1):
# dont use + fro contact use %
volname = str(VOL_PREFIX) + str("_") + str(i)
volname = '%s_%s' % (VOL_PREFIX, i)
vol = VolumeOps(md=media_group,
name=volname,
size=VOL_SIZE,
vol_res=VOL_RES,
flavor=FLAVOR,
create=False)
vol_list.append(vol)
#Creating a snapshot
snap_name = "s1"
logger.info("Creating a snapshot : %s" % snap_name)
snapshot = SnapShotOps(snap_name, volobj=vol_list[0], create=False)
assert (snapshot != None)
################################ 1 Vol restore for unassigned volume
# Restore the vol using its snapshot
snap_id = snapshot.snap_id
print snap_id
logger.info("Running vol_restore using following snaphost : %s" %
snap_name)
status = pvlLibHandle.system.generic_api(
'POST', '/storage/snapshots/%s/restore' % snap_id)
assert (status != 200)
time.sleep(60)
print("1 Vol restore for unassigned volume: PASS")
################################ 2 Vol restore after assign volume
ports = get_two_port_diff_ctlr(ZONE)
logger.info("Assigning vols ")
assign = [v.assign_volume(ports, hostnqn=[]) for v in vol_list]
logger.info("Running vol_restore using following snaphost : %s" %
snap_name)
status = pvlLibHandle.system.generic_api(
'POST', '/storage/snapshots/%s/restore' % snap_id)
assert (status != 200)
time.sleep(60)
print("2 Vol restore after assign volume:PASS")
################################## delete s1 and its child snapshot
#vol,snap_list,clone_list = list_existing_obj(md.name)
#for snap in snap_list:
#snap_to_delete = SnapShotOps(snap,volobj=vol_list[0])
#if snap != snap_name:
#status = snap_to_delete.delete_snapshot
#assert(status != None)
#result = pvlLibHandle.storage.get_snapshot
#print result
#print json.dumps(result,indent=4)
################################## 3. Vol restore after 5% IO on the vol
status = [host.connect_volume(v) for v in vol_list]
assert (status != 0)
time.sleep(5)
#stert fio on all the volumes
logger.info("Starting write on the vol-seq_write")
kwargs = {
'offset': "0",
'size': '5%',
"verify_pattern": "0xABCD",
"verify_interval": 4096,
"do_verify": 1
}
status, response = fio.seq_write(vol_list, host, kwargs)
# Taking snaphost
snap_name = "s2"
logger.info("Taking snapshot :%s" % snap_name)
snapshot = SnapShotOps(snap_name, volobj=vol_list[0], create=True)
assert (snapshot != None)
# Write on remaning space of the volumes
logger.info("Starting write on other space of the vol ")
kwargs = {
'offset': "45g",
'size': '5g',
"verify_pattern": "0xABCD",
"verify_interval": 4096,
"do_verify": 1
}
status, response = fio.rand_read_write(vol_list, host, kwargs)
assert (status == 0)
# disconnect the vol
logger.info("disconnecting the vol from the host")
status = [host.disconnect_volume(v) for v in vol_list]
assert (status != 0)
time.sleep(5)
#assert(status==0)
# restore using latest snapshot
logger.info("Running vol_restore using following snaphost : %s" %
snap_name)
snap_id = snapshot.snap_id
status = pvlLibHandle.system.generic_api(
'POST', '/storage/snapshots/%s/restore' % snap_id)
assert (status != 200)
time.sleep(60)
# cheking data integrity by rading the volumes data
# connecting the vol
logger.info("connecting the vol")
status = [host.connect_volume(v) for v in vol_list]
assert (status != 0)
time.sleep(5)
logger.info("Reading from the raw device")
kwargs = {
'offset': "0",
'size': '5%',
"verify_pattern": "0xABCD",
"verify_interval": 4096,
"do_verify": 1
}
status, response = fio.seq_read(vol_list, host, kwargs)
assert (status == 0)
print("3. Vol restore after 5% IO on the vol:PASS")
################################ 4. Vol restore for degraded volumes
# Power off one drive
mediaList = media_group.get_media_group_disk()
media = [mediaList[0]]
logger.info("Powering off drive : %s" % media)
status = power_off_drive(media, pvlLibHandle)
time.sleep(30)
# overwrite on the volume
logger.info("Starting overwrite on the vol-seq_write")
kwargs = {
'offset': "0",
'size': '5%',
"verify_pattern": "0xABCD",
"verify_interval": 4096,
"do_verify": 1
}
status, response = fio.seq_write(vol_list, host, kwargs)
assert (status == 0)
# disconenct the vol
logger.info("disconnecting the vol from the host")
status = [host.disconnect_volume(v) for v in vol_list]
assert (status != 0)
time.sleep(5)
# restore the volumes using s2
logger.info("Running vol_restore using following snaphost : %s" %
snap_name)
status = pvlLibHandle.system.generic_api(
'POST', '/storage/snapshots/%s/restore' % snap_id)
assert (status != 200)
time.sleep(60)
# connect the vol & verify the data
logger.info("connecting the vol")
status = [host.connect_volume(v) for v in vol_list]
assert (status != 0)
time.sleep(5)
logger.info("Reading from the raw device")
kwargs = {
'offset': "0",
'size': '5%',
"verify_pattern": "0xABCD",
"verify_interval": 4096,
"do_verify": 1
}
status, response = fio.seq_read(vol_list, host, kwargs)
print("4. Vol restore for degraded volumes:PASS")
################################ 5. Vol restore for critical voluems
# poweroff one more drive
media = [mediaList[1]]
logger.info("Powering off drive : %s" % media)
status = power_off_drive(media, pvlLibHandle)
time.sleep(30)
# overwrite on the volume
logger.info("Starting overwrite on the vol-seq_write")
kwargs = {
'offset': "0",
'size': '5%',
"verify_pattern": "0xABCD",
"verify_interval": 4096,
"do_verify": 1
}
status, response = fio.seq_write(vol_list, host, kwargs)
assert (status == 0)
# disconenct the vol
logger.info("disconnecting the vol from the host")
status = [host.disconnect_volume(v) for v in vol_list]
assert (status != 0)
time.sleep(5)
# restore the volumes using s2
logger.info("Running vol_restore using following snaphost : %s" %
snap_name)
status = pvlLibHandle.system.generic_api(
'POST', '/storage/snapshots/%s/restore' % snap_id)
assert (status != 200)
time.sleep(60)
# connect the vol & verify the data
logger.info("connecting the vol")
status = [host.connect_volume(v) for v in vol_list]
assert (status != 0)
time.sleep(5)
logger.info("Reading from the raw device")
kwargs = {
'offset': "0",
'size': '5%',
"verify_pattern": "0xABCD",
"verify_interval": 4096,
"do_verify": 1
}
status, response = fio.seq_read(vol_list, host, kwargs)
print("5. Vol restore for critical voluems:PASS")
################################ 6. Vol restore with rebuild (2>1)
# Poweron one drive and start the rebuild
media = [mediaList[0]]
logger.info("Powering ON drive : %s" % media)
status = power_on_drive(media, pvlLibHandle)
time.sleep(120)
logger.info("Start rebuild 2>1")
status = media_group.rebuild_media_group()
# overwrite on the volume
logger.info("Starting overwrite on the vol-seq_write")
kwargs = {
'offset': "0",
'size': '5%',
"verify_pattern": "0xABCD",
"verify_interval": 4096,
"do_verify": 1
}
status, response = fio.seq_write(vol_list, host, kwargs)
assert (status == 0)
# disconenct the vol
logger.info("disconnecting the vol from the host")
status = [host.disconnect_volume(v) for v in vol_list]
assert (status != None)
time.sleep(5)
# restore the volumes using s2
logger.info("Running vol_restore using following snaphost : %s" %
snap_name)
status = pvlLibHandle.system.generic_api(
'POST', '/storage/snapshots/%s/restore' % snap_id)
assert (status != 200)
time.sleep(60)
# connect the vol & verify the data
logger.info("connecting the vol")
status = [host.connect_volume(v) for v in vol_list]
assert (status != 0)
time.sleep(5)
logger.info("Reading from the raw device")
kwargs = {
'offset': "0",
'size': '5%',
"verify_pattern": "0xABCD",
"verify_interval": 4096,
"do_verify": 1
}
status, response = fio.seq_read(vol_list, host, kwargs)
print("6. Vol restore with rebuild (2>1):PASS")
################################ 7. Vol restore with rebuild (1>0)
media = [mediaList[1]]
logger.info("Powering ON drive : %s" % media)
status = power_on_drive(media, pvlLibHandle)
time.sleep(120)
logger.info("Start rebuild 1>0")
status = media_group.rebuild_media_group()
# overwrite on the volume
logger.info("Starting overwrite on the vol-seq_write")
kwargs = {
'offset': "0",
'size': '5%',
"verify_pattern": "0xABCD",
"verify_interval": 4096,
"do_verify": 1
}
status, response = fio.seq_write(vol_list, host, kwargs)
assert (status == 0)
# disconenct the vol
logger.info("disconnecting the vol from the host")
status = [host.disconnect_volume(v) for v in vol_list]
assert (status != 0)
time.sleep(5)
# restore the volumes using s2
logger.info("Running vol_restore using following snaphost : %s" %
snap_name)
status = pvlLibHandle.system.generic_api(
'POST', '/storage/snapshots/%s/restore' % snap_id)
assert (status != 200)
time.sleep(60)
# connect the vol & verify the data
logger.info("connecting the vol")
status = [host.connect_volume(v) for v in vol_list]
assert (status != 0)
time.sleep(5)
logger.info("Reading from the raw device")
kwargs = {
'offset': "0",
'size': '5%',
"verify_pattern": "0xABCD",
"verify_interval": 4096,
"do_verify": 1
}
status, response = fio.seq_read(vol_list, host, kwargs)
print("7. Vol restore with rebuild (1>0):PASS")
################################ 8. Vol restore with rebuild (2>0)
media = [mediaList[0], mediaList[1]]
logger.info("Powering OFF drive : %s" % media)
status = power_off_drive(media, pvlLibHandle)
time.sleep(120)
logger.info("Powering ON drive : %s" % media)
status = power_on_drive(media, pvlLibHandle)
time.sleep(120)
# start rebuild
logger.info("Start rebuild 2>0")
status = media_group.rebuild_media_group()
# overwrite on the volume
logger.info("Starting overwrite on the vol-seq_write")
kwargs = {
'offset': "0",
'size': '5%',
"verify_pattern": "0xABCD",
"verify_interval": 4096,
"do_verify": 1
}
status, response = fio.seq_write(vol_list, host, kwargs)
assert (status == 0)
# disconenct the vol
logger.info("disconnecting the vol from the host")
status = [host.disconnect_volume(v) for v in vol_list]
assert (status != 0)
time.sleep(5)
# restore the volumes using s2
logger.info("Running vol_restore using following snaphost : %s" %
snap_name)
status = pvlLibHandle.system.generic_api(
'POST', '/storage/snapshots/%s/restore' % snap_id)
assert (status != 200)
time.sleep(60)
# connect the vol & verify the data
logger.info("connecting the vol")
status = [host.connect_volume(v) for v in vol_list]
assert (status != 0)
time.sleep(5)
logger.info("Reading from the raw device")
kwargs = {
'offset': "0",
'size': '5%',
"verify_pattern": "0xABCD",
"verify_interval": 4096,
"do_verify": 1
}
status, response = fio.seq_read(vol_list, host, kwargs)
print("8. Vol restore with rebuild (2>0):PASS")
################################ 9. Vol restore with clone is connected to the host
# overwrite on the volume
logger.info("Starting overwrite on the vol-seq_write")
kwargs = {
'offset': "0",
'size': '5%',
"verify_pattern": "0xABCD",
"verify_interval": 4096,
"do_verify": 1
}
status, response = fio.seq_write(vol_list, host, kwargs)
assert (status == 0)
# create clone
clone_name = str(snap_name) + str("_c1")
cloneObj = CloneOps(clone_name, snapshot, create=True)
# assign clone
assign = cloneobj.assign_clone(ports, hostnqn=[])
# connect clone to the host
status = host.connect_volume(cloneObj)
assert (status != 0)
time.sleep(5)
# start IO on the clone
kwargs = {
'offset': "0",
'size': '5%',
"verify_pattern": "0xABCD",
"verify_interval": 4096,
"do_verify": 1
}
status, response = fio.seq_write(cloneObj, host, kwargs)
assert (status == 0)
# disconenct the vol
logger.info("disconnecting the vol from the host")
status = [host.disconnect_volume(v) for v in vol_list]
assert (status != 0)
time.sleep(5)
# restore the volumes using s2
logger.info("Running vol_restore using following snaphost : %s" %
snap_name)
status = pvlLibHandle.system.generic_api(
'POST', '/storage/snapshots/%s/restore' % snap_id)
assert (status != 200)
time.sleep(60)
# connect the vol & verify the data
logger.info("connecting the vol")
status = [host.connect_volume(v) for v in vol_list]
assert (status != 0)
time.sleep(5)
logger.info("Reading from the raw device")
kwargs = {
'offset': "0",
'size': '5%',
"verify_pattern": "0xABCD",
"verify_interval": 4096,
"do_verify": 1
}
status, response = fio.seq_read(vol_list, host, kwargs)
print("9. Vol restore with clone is connected to the host:PASS")