def phy16q_200g_linespeed_test(self):
self.kill_sdk_process()
cmd = 'cd /usr/local/bin/'
cd_prompt = self.prompt.replace('~', cmd.split('/')[-2])
self.sendCmd(cmd, writting=False, prompt=cd_prompt)
ret = 0
try:
self.send("./start_200G_bc_mode.sh \r")
while True:
x = self.expect([
cd_prompt, '\r', '\n', '^ERROR', '(?i)FAIL', '(?i)bcmLINK',
'(?i)PASS'
])
if x == 0:
break
elif x >= 3 and x <= 4:
ret = 1
elif x == 5:
self.send("\x03")
ret = 1
break
elif x == 6:
ret = 0
time.sleep(0.2)
except:
UI.log("FAIL",
"Calling the script %s FAILED!" % "start_40G_bc_mode.sh")
return DIAG_STATUS_FAILED
return ret
def run(self):
"""
Function Name: run
Purpose: Executes the steps defined by this test case.
"""
# initialize serial, Telnet and SSH UI with SystemMgmt APIs.
self.__SSH = super().initUI(self.__dut.ssh_credentials,
self.__dut.platform, FPGA)
rand_value = generate_rand_hex()
test_port = [1, 2]
# Do not surround assignment operator = with spaces in paranthesised expressions.
UI.log(
'S1 Write bit patterns to this register and check the bit patterns in this register.'
)
self.__SSH.minicycle_raw('0x4008C', '0x0', 'write')
self.__SSH.minicycle_raw('0x40098', '0x00000000', 'write')
self.__SSH.minicycle_raw('0x40098', '0x00000000', 'read')
self.__SSH.minicycle_raw('0x40098', '0xFFFFFFFF', 'write')
self.__SSH.minicycle_raw('0x40098', '0xFFFFFFFF', 'read')
UI.log('S2 Reset to default.')
self.__SSH.minicycle_raw('0x40098', '0xFFFFFFFF', 'write')
self.__SSH.minicycle_raw('0x40090', '0x00000000', 'read')
self.__SSH.minicycle_raw('0x4008C', '0x0', 'write')
def run(self):
"""
Function Name: run
Purpose: Executes the steps defined by this test case.
"""
# initialize serial, Telnet and SSH UI with SystemMgmt APIs.
self.__TELNET = super().initUI(self.__dut.telnet_credentials,
self.__dut.platform, OpenBMC)
self.__cycle = 1
self.__fail_count = 0
self.__pim_count = 8
# ==================================================================================================
self.__TELNET.send('sudo ifconfig eth0 ' +
self.__dut.ssh_credentials[1] + ' netmask ' +
self.__dut.ssh_netmask + '\r')
self.__TELNET.expect(self.__dut.ssh_credentials[5])
for i in range(1, self.__cycle + 1):
self.__TELNET.send('feutil all\r')
while True:
if self.__TELNET.expect([self.__dut.ssh_credentials[5], 'Fan'],
timeout=180) == 0:
break
UI.log(
'CHECK', 'Cycle#' + str(i) + '/' + str(self.__cycle) +
': The FCM fru/FAN tray eeprom read complete.')
UI.log(
'CHECK', 'Cycle#' + str(i) + '/' + str(self.__cycle) +
': BMC_0820 Reading_PSU_information need to check.')
def get_sensor_info_from_BMC(self):
UI.log('ACTION', 'Get all sensor information from OpenBMC')
self.send('sensor-util all \r')
self.expect(self.prompt)
UI.log(
'PASS', 'Get all sensor information from OpenBMC is PASS\n\n' +
'=' * settings.glb.log_width)
def th3_xgkr_test(self):
self.kill_sdk_process()
cmd = 'cd /usr/local/accton/bin/XGKR/'
cd_prompt = self.prompt.replace('~', cmd.split('/')[-2])
self.sendCmd(cmd, writting=False, prompt=cd_prompt)
ret = 0
#bmc_util.tty_write("set_fan_speed.sh 50\r")
try:
self.send("./XGKR_Test \r")
while True:
x = self.expect([
cd_prompt, '\r', '\n', '^Error', 'PORT: Error:', '(?i)PASS'
])
if x == 0:
break
if x == 3 or x == 4:
ret = 1
if x == 5:
ret = 0
time.sleep(0.2)
except:
UI.log("FAIL", "Calling the script %s FAILED!" % "XGKR_Test")
return DIAG_STATUS_FAILED
return ret
def pci_get_pci_cfg_base_by_bdf(self, BUS, DEV, FN, VENDOR_ID, DEVICE_ID):
try:
cmd_ret = self.sendCmd(
'cat /proc/iomem | grep MMCONFIG > /dev/null', writting=False)
except:
UI.log("FAIL", "Can't find MMCONFIG in /proc/iomem")
return 0, 1
cmd_ret = self.sendCmd(
'cat /proc/iomem | grep MMCONFIG | awk \'{print $1}\' | awk -F "-" \'{print $1}\'',
writting=False)
if cmd_ret != "":
cmd_ret = cmd_ret.splitlines()
for line in cmd_ret:
if re.search('^\d', line):
MMCONFIG = line
MMCONFIG = int("0x" + MMCONFIG, 16)
CFG_BASE = MMCONFIG + (int(BUS, 16) << 20 | int(DEV, 16) << 15
| int(FN, 16) << 12)
#Verify CFG BASE
DEVICE = self.sendCmd('mem 0x%x 32' % CFG_BASE, writting=False)
if DEVICE != "":
DEVICE = DEVICE.splitlines()
DEVICE = int(DEVICE[0], 16)
TARGET_DEVICE = (VENDOR_ID | (DEVICE_ID << 16))
if DEVICE != TARGET_DEVICE:
UI.log(
"FAIL",
"DEVICE != TARGET_DEVICE for %x:%x" % (VENDOR_ID, DEVICE_ID))
return 0, 1
return CFG_BASE, 0
def run(self):
"""
Function Name: run
Purpose: Executes the steps defined by this test case.
"""
# initialize serial, Telnet and SSH UI with SystemMgmt APIs.
self.__TELNET = super().initUI(self.__dut.ssh_credentials,
self.__dut.platform, SONiC_API)
prompt = self.__dut.telnet_credentials[5]
url = 'http://210.63.221.19:8888/sonic-broadcom.bin'
# Using API from ../lib/cli/sonic/SONiC_API to execute function
self.__TELNET.changeImageVersion(url)
# Using traditional method step by step to execute function.
UI.log("ACTION", "Install SONiC image from " + url)
self.__TELNET.send('sudo sonic_installer install -y ' + url + ' \r')
while True:
x = self.__TELNET.expect(['\r', prompt, 'Downloading image'])
if x == 1:
# Upgrade finished.
UI.log("PASS", "Install SONiC image success.")
break
def run(self):
"""
Function Name: run
Purpose: Executes the steps defined by this test case.
"""
# initialize serial, Telnet and SSH UI with SystemMgmt APIs.
self.__TELNET = super().initUI(self.__dut.telnet_credentials,
self.__dut.platform, OpenBMC)
self.__cycle = 1
for i in range(1, self.__cycle + 1):
# ==================================================================================================
UI.log(
'STEP#01 - cycle#' + str(i) + '/' + str(self.__cycle),
'Verify the information of wedge system EEPROM can be read with the command.'
)
self.__TELNET.send('weutil\r')
self.__TELNET.expect(self.__dut.ssh_credentials[5])
result = re.search('(?i)Failed', self.__TELNET.getBuff(), re.M)
if result == None:
UI.log(
'PASS', 'Cycle#' + str(i) + '/' + str(self.__cycle) +
': The SMB fru eeprom read complete.')
UI.log(
'PASS', 'Cycle#' + str(i) + '/' + str(self.__cycle) +
': BMC_0140 Reading_SMB_fru_eeprom_information is passed.')
else:
UI.log(
'FAIL', 'Cycle#' + str(i) + '/' + str(self.__cycle) +
': The SMB fru eeprom read failed.')
UI.log(
'FAIL', 'Cycle#' + str(i) + '/' + str(self.__cycle) +
': BMC_0140 Reading_SMB_fru_eeprom_information is failed.')
def phy16q_linespeed_test(self):
self.kill_sdk_process()
cmd = 'cd /usr/local/accton/bin/LineSpeed/'
cd_prompt = self.prompt.replace('~', cmd.split('/')[-2])
self.sendCmd(cmd, writting=False, prompt=cd_prompt)
ret = 0
#bmc_util.tty_write("set_fan_speed.sh 50\r")
try:
self.send("./linespeed_test 16q \r")
while True:
x = self.expect([
cd_prompt, '\r', '\n', '^Error', 'PORT: Error:',
'(?i)FAIL', '>> PASS'
])
if x == 0:
break
elif x >= 3 and x <= 5:
ret = 1
elif x == 6:
ret = 0
time.sleep(0.2)
except:
UI.log("FAIL", "Calling the script %s FAILED!" % "linespeed_test")
return DIAG_STATUS_FAILED
return ret
def exitBMCThroughCOMe(self):
self.send('\001')
self.send(':quit \r\n')
try:
self.expect('#')
UI.log('PASS', 'Exit OpenBMC session from Micro-server is pass.')
except:
UI.log('FAIL', 'Exit OpenBMC session from Micro-server is failed.')
def exitCOMeThroughBMC(self):
self.send('\x0c')
self.send('x \r\n')
try:
self.expect('#')
UI.log('PASS', 'Exit COMe session from BMC session is pass.')
except:
UI.log('FAIL', 'Exit COMe session from BMC session is failed.')
def chk_string(class_obj, str_get, str_expect):
if str_expect.lower() in str_get.lower():
UI.log('PASS',
'The string ' + str_expect + ' is found in' + str_get + '.')
else:
UI.log(
'FAIL', 'The string ' + str_expect + ' is not found in ' +
str_get + '.')
def enterCOMeFromBMC(self):
self.send('sol.sh \r\n')
time.sleep(1)
self.send('\r')
try:
self.expect('#')
UI.log('PASS', 'Enter COMe session from BMC is pass.')
except:
UI.log('FAIL', 'Enter COMe session from BMC is failed.')
def run(self):
"""
Function Name: run
Purpose: Executes the steps defined by this test case.
"""
# initialize serial, Telnet and SSH UI with SystemMgmt APIs.
self.__TELNET = super().initUI(self.__dut.telnet_credentials,
self.__dut.platform, OpenBMC)
self.__cycle = 1
self.__fail_count = 0
for i in range(1, self.__cycle + 1):
# ==================================================================================================
UI.log('STEP#01 - cycle#' + str(i) + '/' + str(self.__cycle),
'Get COM-e MAC address from BMC.')
self.__TELNET.send('wedge_us_mac.sh\r')
self.__TELNET.expect(self.__dut.ssh_credentials[5])
self.__wedge_mac = re.search(
'(?i)wedge_us_mac.sh(.*)' + self.__dut.ssh_credentials[3],
self.__TELNET.getBuff().replace('\n', ''), re.M)
self.__TELNET.send('sv stop mTerm\r')
self.__TELNET.expect(self.__dut.ssh_credentials[5])
self.__TELNET.send('sol.sh\r')
self.__TELNET.expect('quit.')
self.__TELNET.send('\r')
self.__TELNET.expect('~]# ')
self.__TELNET.send('ifconfig eth0\r')
self.__TELNET.expect('~]# ')
result = re.search('(?i)' + str(self.__wedge_mac.group(1)).strip(),
self.__TELNET.getBuff().replace('\n', ''), re.M)
if result == None:
self.__fail_count += 1
UI.log(
'FAIL', 'Cycle#' + str(i) + '/' + str(self.__cycle) +
': Get MAC and COM-E MAC is not match.')
else:
UI.log(
'PASS', 'Cycle#' + str(i) + '/' + str(self.__cycle) +
': Get MAC and COM-E MAC is match.')
self.__TELNET.send('\x18')
self.__TELNET.expect(self.__dut.ssh_credentials[5])
if self.__fail_count == 0:
UI.log(
'PASS', 'Cycle#' + str(i) + '/' + str(self.__cycle) +
': BMC_0780 Get_COM-e_MAC_from_BMC is passed.')
else:
UI.log(
'FAIL', 'Cycle#' + str(i) + '/' + str(self.__cycle) +
': BMC_0780 Get_COM-e_MAC_from_BMC is failed.')
def changeImageVersion(self, url):
UI.log("ACTION", "Install SONiC image from " + url)
cli = 'sudo sonic_installer install -y ' + url + '\r'
self.send(cli)
while True:
x = self.expect(['\r', self.prompt])
if x == 1 :
UI.log("PASS", "Install SONiC image success.")
# Upgrade finished.
break
def setGenerateKey(self, encryption_type=""):
prompt = super().getPrompt()
UI.log('ACTION', 'Generate SSH public host key.')
start = datetime.now()
timeout = 180
self.send('ip ssh crypto host-key generate ' + encryption_type + '\r')
self.expect(prompt, timeout=timeout)
end = datetime.now()
duration = str(end - start)
UI.log('Key generation duration: ' + duration)
def run(self):
"""
Function Name: run
Purpose: Executes the steps defined by this test case.
"""
# initialize serial, Telnet and SSH UI with SystemMgmt APIs.
self.__SSH = super().initUI(self.__dut.ssh_credentials,
self.__dut.platform, FPGA)
rand_value = generate_rand_hex()
test_port = [1, 2]
# Do not surround assignment operator = with spaces in paranthesised expressions.
UI.log('S1 Trap QSFP modules to reset mode and check the register. ')
self.__SSH.minicycle_raw('0x40070', '0xffffffff', 'write')
self.__SSH.minicycle_raw('0x40070', '0xffffffff', 'read')
self.__SSH.minicycle_raw('0x40070', '0x0', 'write')
reset_port = self.__SSH.minicycle_raw('0x40070', '', 'get')[4:8]
UI.log('The reset port is ' + reset_port)
if hex(int(gen_bin_byport(test_port, reverse='true'),
2))[2:6].upper() == reset_port.upper():
UI.log('PASS', 'The port in reset mode is correct.')
else:
UI.log('FAIL', 'The port in reset mode is incorrect.')
def enterBMCFromCOMe(self):
BMC_username = '******'
BMC_password = '******'
BMC_prompt = '# '
return_char = '\r'
login_count = 0
UI.log('ACTION', 'Enter OpenBMC session from Micro-server')
self.send('screen /dev/ttyACM0 \r\n')
while True:
i = self.expect(['bmc-oob. login: '******'(?i)Password.*', BMC_prompt])
if i == 2:
UI.log('PASS', 'Enter OpenBMC session from Micro-server is pass.')
break
elif i == 0:
self.send(BMC_username + return_char)
elif i == 1:
self.send(BMC_password + return_char)
login_count += 1
if login_count > 2:
UI.log('FAIL', 'Can not enter OpenBMC session from Micro-server.')
if not settings.glb.print_to_stdout:
print('CRITICAL ALERT: Login failed. Permission denied for username/password: %s/%s'
%(BMC_username, BMC_password))
UI.log('CRITICAL ALERT', 'Login failed. Permission denied for username/password: %s/%s'
%(BMC_username, BMC_password))
break
def powerOff(self, number_list, model='ATEN'):
prompt = super().getPrompt()
if model == 'ATEN':
UI.log('ACTION', 'Power OFF outlet number "' + number_list + '".')
for number in number_list.split(','):
number_format = str('%02d' % int(number.strip()))
self.send('sw o' + number_format + ' off imme\r')
time.sleep(self.__sleep_time)
self.expect(prompt)
time.sleep(self.__sleep_time)
def bmc_check_pcie_err(self):
ret = DIAG_STATUS_SUCCESS
fpga_key = "FPGA"
th3_key = "Tomahawk 3"
unknown_key = "Unknown"
pcie_err_log = {
fpga_key: [],
th3_key: [],
unknown_key: [],
}
try:
# Check BMC log
UI.log("### Check BMC system event log ###")
cmd = "grep -n PCIE /mnt/data/logfile*"
rs = self.get_process_result(cmd)
if rs:
for line in rs:
if "(Bus 00 / Dev 03 / Fun 01)" in line:
ret = DIAG_STATUS_FAILED
pcie_err_log[th3_key].append(line)
elif "(Bus 00 / Dev 03 / Fun 00)" in line:
ret = DIAG_STATUS_FAILED
pcie_err_log[fpga_key].append(line)
else:
if 'No such file or directory' not in line:
ret = DIAG_STATUS_FAILED
pcie_err_log[unknown_key].append(line)
for key in sorted(pcie_err_log.keys()):
log_ls = pcie_err_log[key]
err_count = len(log_ls)
print("\n===== %s PCIE error (%d) =====" % (key, err_count))
for log in log_ls:
print(log)
# Check CPU log
except Exception as e:
error_class = e.__class__.__name__ #取得錯誤類型
detail = e.args[0] #取得詳細內容
cl, exc, tb = sys.exc_info() #取得Call Stack
lastCallStack = traceback.extract_tb(tb)[-1] #取得Call Stack的最後一筆資料
fileName = lastCallStack[0] #取得發生的檔案名稱
lineNum = lastCallStack[1] #取得發生的行號
funcName = lastCallStack[2] #取得發生的函數名稱
errMsg = "\n\nFile \"{}\", line {}, in {}: [{}] {}\n\n".format(
fileName, lineNum, funcName, error_class, detail)
print(errMsg)
return DIAG_STATUS_FAILED
return ret
def __init__(self, config):
name = config.get('player', 'name')
spaceship = config.get('player', 'spaceship')
self.chat = ChatClient()
self.display = Display()
self.ui = UI()
int_colors, ext_colors = {}, {}
obj_defs = open('dat/int_obj_colors.txt', 'rb').read().split('\n')
for line in obj_defs:
if len(line):
char, color = line.split('|')
int_colors[char] = eval(color)
obj_defs = open('dat/ext_obj_colors.txt', 'rb').read().split('\n')
for line in obj_defs:
if len(line):
char, color = line.split('|')
ext_colors[char] = eval(color)
self.ui.set_default_colors(int_colors, ext_colors)
self.evt_mode, self.evt_mode_desc = 'normal', ''
self.action = ('connect', (name, spaceship))
self.arg_type = 'tuple_of_str'
self.require_arg = False
self.queued_evt = False
self.prompt = ''
ver = 'v0.3.1-alpha'
self.top_status_bar = ' ' * (80 - len(ver)) + ver
self.bottom_status_bar = ''
self.view_field, self.colors = False, {}
self.command = None
self.look_pointer, self.target = None, None
self.fps = 50
self.blinker = 0
def i2cBusTest(self):
is_mcp2221a_used = -1
retstr = self.sendCmd("cat %s " % DIAG_IS_MCP2221A_USED_FILE)
if retstr != "":
retstr = retstr.splitlines()
is_mcp2221a_used = int(retstr[0])
if is_mcp2221a_used == 1:
i2c_0_device_address = ['08', '44', '48']
else:
i2c_0_device_address = ['74', 'e0', 'ae', 'be']
UI.log("is_mcp2221a_used %d" % is_mcp2221a_used)
return i2c_0_device_address
def run(self):
"""
Function Name: run
Purpose: Executes the steps defined by this test case.
"""
# initialize serial, Telnet and SSH UI with SystemMgmt APIs.
self.__TELNET = super().initUI(self.__dut.telnet_credentials, self.__dut.platform, OpenBMC)
self.__cycle = 1
self.__fail_count = 0
# ==================================================================================================
self.__TELNET.sendCmd('fpga_ver.sh')
if self.__fail_count == 0:
UI.log('PASS', 'BMC_0520 Checking IOB FPGA and DOM FPGA version. is passed.')
else:
UI.log('FAIL', 'BMC_0520 Checking IOB FPGA and DOM FPGA version. is failed.')
def check_cpu_log(self):
ret = DIAG_STATUS_SUCCESS
try:
UI.log('### Check CPU FPGA pcie error ###')
cmd = 'zgrep "FPGA.*b=0[1-7]" /var/log/message*'
retstr = self.sendCmd(cmd, writting=False).splitlines()
for i in range(0, len(retstr)):
if cmd in retstr[i]:
retstr.pop(i)
elif self.prompt in retstr[i]:
retstr.pop(i)
if len(retstr):
ret = DIAG_STATUS_FAILED
except Exception as e:
print(repr(e))
return DIAG_STATUS_FAILED
return ret
def run(self):
"""
Function Name: run
Purpose: Executes the steps defined by this test case.
"""
# initialize serial, Telnet and SSH UI with SystemMgmt APIs.
self.__TELNET = super().initUI(self.__dut.telnet_credentials,
self.__dut.platform, OpenBMC)
self.__cycle = 1
self.__fail_count = 0
self.__TELNET.send('sudo ifconfig eth0 ' +
self.__dut.ssh_credentials[1] + ' netmask ' +
self.__dut.ssh_netmask + '\r')
self.__TELNET.expect(self.__dut.ssh_credentials[5])
for i in range(1, self.__cycle + 1):
# ==================================================================================================
UI.log('STEP#01', 'To show the I2C can be detect by BMC.')
self.__TELNET.send('i2cget -y 10 0x6f\r')
self.__TELNET.expect(self.__dut.ssh_credentials[5])
result = re.search('(?i)0x', self.__TELNET.getBuff(), re.M)
if result == None:
self.__fail_count += 1
UI.log(
'FAIL', 'Cycle#' + str(i) + '/' + str(self.__cycle) +
': Can not to use the command getting the value of i2c bus.'
)
else:
UI.log(
'PASS', 'Cycle#' + str(i) + '/' + str(self.__cycle) +
': Can using the command to get the value of i2c bus.')
if self.__fail_count == 0:
UI.log(
'PASS', 'Cycle#' + str(i) + '/' + str(self.__cycle) +
': BMC_0540 Use i2cget to access i2c busses is passed.')
else:
UI.log(
'FAIL', 'Cycle#' + str(i) + '/' + str(self.__cycle) +
': BMC_0540 Use i2cget to access i2c bussesis failed.')
def scp(self, copy_direction, src, dst, remote_ip, username, password):
if re.match('(?i)remote.*host', copy_direction):
src = username + '@' + remote_ip + ':' + src
elif re.match('(?i)host.*remote', copy_direction):
dst = username + '@' + remote_ip + ':' + dst
EOF = self.getEOF()
copy_result = 'CHECK'
copy_msg = ['Command not executed.']
try:
self.spawn('scp ' + src + ' ' + dst)
while True:
i = self.expect([
'(?i)password.*', '100%.*', '(?i)Error opening file',
'(?i)are the same file', '(?i)Permission denied', EOF
])
if i == 0:
self.send(password + '\r')
elif i == 1:
copy_result = 'PASS'
copy_msg[0] = 'File copied successfully.'
copy_msg.append('Source: ' + src)
copy_msg.append('Destination: ' + dst)
elif i == 2:
copy_result = 'FAIL'
copy_msg[0] = 'Error copying file.'
elif i == 3:
copy_result = 'CHECK'
copy_msg[0] = 'No file copied.'
elif i == 4:
copy_result = 'FAIL'
copy_msg[0] = 'Invalid username/password.'
elif i == 5:
break
except Exception as e:
UI.log(str(e))
copy_result = 'FAIL'
copy_msg[0] = 'Exception encountered while copying.'
UI.log(copy_result, *copy_msg)
def pci_all_clear_all_aer_mask(self):
try:
cmd_ret = self.sendCmd('lspci -n | awk \'{printf $1 " "}\'',
writting=False)
pci_dev_list = cmd_ret.split()
except:
UI.log("FAIL", "get pci dev list failed")
return 1
try:
cmd_ret = self.sendCmd('lspci -n | awk \'{printf $3 " "}\'',
writting=False)
pci_id_list = cmd_ret.split()
except:
UI.log("FAIL", "get pci dev id failed")
return 1
for i in range(len(pci_dev_list) - 2):
if i == 0:
print('\r')
try:
if self.prompt.replace(
' ', ''
) not in pci_dev_list[i] or '.*root@.*' not in pci_dev_list[i]:
BUS = pci_dev_list[i].split(':')[0]
DEV = pci_dev_list[i].split(':')[1].split('.')[0]
FN = pci_dev_list[i].split(':')[1].split('.')[1]
VENDOR_ID = int("0x" + pci_id_list[i].split(':')[0], 16)
DEVICE_ID = int("0x" + pci_id_list[i].split(':')[1], 16)
PCI_BASE, ret = self.pci_get_pci_cfg_base_by_bdf(
BUS, DEV, FN, VENDOR_ID, DEVICE_ID)
except Exception as e:
pass
if ret == 0:
AER_BASE, ret = self.pci_get_aer_cfg_base(PCI_BASE)
if ret == 0:
print("Clear %s AER mask" % pci_dev_list[i])
self.aer_cfg_clear_cemask(AER_BASE)
self.aer_cfg_clear_uemask(AER_BASE)
else:
print("%s no AER mask" % pci_dev_list[i])
else:
return 1
return 0
def run(self):
"""
Function Name: run
Purpose: Executes the steps defined by this test case.
"""
# initialize serial, Telnet and SSH UI with SystemMgmt APIs.
self.__SSH = super().initUI(self.__dut.ssh_credentials,
self.__dut.platform, FPGA)
rand_value = generate_rand_hex()
pim_card = "1"
test_port = [1, 2]
# Do not surround assignment operator = with spaces in paranthesised expressions.
UI.log('S1 Reset the MDIO Interrupt Status.')
self.__SSH.minicycle_raw('0x40084', '0x0', 'write')
self.__SSH.minicycle_raw('0x4009c', '0x0', 'write')
print('Wait for 120 seconds.')
time.sleep(120)
UI.log('S2 Write 0x0 to this register to trap PHYs in the reset mode.')
self.__SSH.minicycle_raw('0x4009c', '0xFFFF0000', 'write')
self.__SSH.minicycle_raw('0x40084', '0xf', 'write')
print('Wait for 120 seconds.')
time.sleep(120)
UI.log('S3 Invoke minicycle.py to get PHY ID.')
self.__SSH.minicycle_mdio(pim=pim_card,
way='read',
check_value='Fail to get PHY ID')
time.sleep(5)
UI.log('S4 Write 0xFFFFFFFF to release PHYs from reset mode.')
self.__SSH.minicycle_raw('0x4009C', '0xFFFFFFFF', 'write')
print('Wait for 120 seconds.')
time.sleep(120)
UI.log(
'S5 Invoke minicycle.py to get PHY ID. Make sure all the transactions succeed.'
)
self.__SSH.minicycle_mdio(pim=pim_card, way='read', check_value='0x')
time.sleep(5)
def run(self):
"""
Function Name: run
Purpose: Executes the steps defined by this test case.
"""
# initialize serial, Telnet and TELNET UI with SystemMgmt APIs.
self.__SSH = super().initUI(self.__dut.ssh_credentials,
self.__dut.platform, OpenBMC)
self.__fail_count = 0
# Do not surround assignment operator = with spaces in paranthesised expressions.
self.__SSH.send('sensor-util all \r')
self.__SSH.expect(self.prompt, timeout=180)
if self.__fail_count == 0:
UI.log('PASS', 'BMC_0070 Monitoring All Sensors is passed.')
else:
UI.log('FAIL', 'BMC_0070 Monitoring All Sensors is failed.')
def run(self):
"""
Function Name: run
Purpose: Executes the steps defined by this test case.
"""
# initialize serial, Telnet and SSH UI with SystemMgmt APIs.
self.__TELNET = super().initUI(self.__dut.telnet_credentials,
self.__dut.platform, OpenBMC)
self.__cycle = 1
self.__pim_count = 8
self.__fail_count = 0
# ==================================================================================================
self.__TELNET.send('sudo ifconfig eth0 ' +
self.__dut.ssh_credentials[1] + ' netmask ' +
self.__dut.ssh_netmask + '\r')
self.__TELNET.expect(self.__dut.ssh_credentials[5])
for i in range(1, self.__cycle + 1):
# ==================================================================================================
UI.log('STEP#01 - cycle#' + str(i) + '/' + str(self.__cycle),
'Read information about COM-e BIOS and BIC version.')
self.__TELNET.send('fw-util scm --version\r')
self.__TELNET.expect(self.__dut.ssh_credentials[5])
# result = re.search('(?i)BIOS Version', self.__TELNET.getBuff(), re.M)
# if result == None:
# UI.log('FAIL', 'Cycle#' + str(i) + '/' + str(self.__cycle) + ': COM-e BIOS and BIC read failure.')
# else:
# self.__fail_count += 1
# UI.log('PASS', 'Cycle#' + str(i) + '/' + str(self.__cycle) + ': COM-e BIOS and BIC read success.')
# if self.__fail_count == 0:
# UI.log('PASS', 'Cycle#' + str(i) + '/' + str(self.__cycle) + ': BMC_0700 Read_COM_e_CPLD_and_BIC_version is passed.')
# else:
# UI.log('FAIL', 'Cycle#' + str(i) + '/' + str(self.__cycle) + ': BMC_0700 Read_COM_e_CPLD_and_BIC_version is failed.')
UI.log(
'CHECK', 'Cycle#' + str(i) + '/' + str(self.__cycle) +
': BMC_0700 Read_COM_e_CPLD_and_BIC_version need to check.')
def beginLog(self, file_name=''):
if file_name == '':
file_name = self.__name
self.__log_name = file_name + '.log'
if not os.path.exists(self.__log_path):
os.makedirs(self.__log_path)
UI.openLog(self.__log_path + '/' + self.__log_name)
UI.logTitle('INITIALIZING SCRIPT ' + self.__name)
if self.__headline != '':
UI.log('HEADLINE', *self.__headline)
if self.__purpose != '':
UI.log('PURPOSE', *self.__purpose)
self.__start = datetime.now()
UI.log('BEGIN LOG', 'Start time: ' + str(self.__start).split('.')[0])
class GameClient(object):
def __init__(self, config):
name = config.get('player', 'name')
spaceship = config.get('player', 'spaceship')
self.chat = ChatClient()
self.display = Display()
self.ui = UI()
int_colors, ext_colors = {}, {}
obj_defs = open('dat/int_obj_colors.txt', 'rb').read().split('\n')
for line in obj_defs:
if len(line):
char, color = line.split('|')
int_colors[char] = eval(color)
obj_defs = open('dat/ext_obj_colors.txt', 'rb').read().split('\n')
for line in obj_defs:
if len(line):
char, color = line.split('|')
ext_colors[char] = eval(color)
self.ui.set_default_colors(int_colors, ext_colors)
self.evt_mode, self.evt_mode_desc = 'normal', ''
self.action = ('connect', (name, spaceship))
self.arg_type = 'tuple_of_str'
self.require_arg = False
self.queued_evt = False
self.prompt = ''
ver = 'v0.3.1-alpha'
self.top_status_bar = ' ' * (80 - len(ver)) + ver
self.bottom_status_bar = ''
self.view_field, self.colors = False, {}
self.command = None
self.look_pointer, self.target = None, None
self.fps = 50
self.blinker = 0
def main(self):
if self.action and not self.require_arg:
command = getattr(self.command, 'queue_' + self.arg_type)
command(self.action[0], self.action[1])
self.action, self.arg_type = False, False
if not self.view_field:
return
events = event.get(self.evt_mode)
if events:
self.evt_mode, evt, evt_arg, self.arg_type = events
else:
evt, evt_arg = None, None
if self.evt_mode == 'normal' and len(self.evt_mode_desc):
self.evt_mode_desc = ''
if evt == 'quit':
self.command.stop()
elif evt == 'arg' and self.require_arg:
self.action = (self.action, evt_arg) if evt_arg else 0
self.evt_mode_desc = ''
self.require_arg = False
elif evt == 'activate':
self.action = evt
self.evt_mode_desc = 'Activate.. (direction)'
self.require_arg = True
elif evt == 'look':
self.evt_mode_desc = 'Look... (direction)'
self.action = (evt, evt_arg)
elif evt == 'look_done':
self.evt_mode_desc = ''
self.action = (evt, evt_arg)
elif evt == 'insert':
self.prompt += evt_arg
elif evt == 'backspace' and self.prompt:
self.prompt = self.prompt[: - evt_arg]
elif evt == 'return' and self.prompt:
self.action = (self.queued_evt, self.prompt)
self.queued_evt = False
self.prompt, self.evt_mode, self.evt_mode_desc = '', 'normal', ''
elif evt in ['say', 'equip', 'drop', 'unequip']:
if evt == 'say':
self.evt_mode_desc = 'Say...'
elif evt == 'equip':
self.evt_mode_desc = 'Equip... (item, slot)'
elif evt == 'drop':
self.evt_mode_desc = 'Drop... (item name)'
elif evt == 'unequip':
self.evt_mode_desc = 'Unequip... (slot)'
self.queued_evt = evt
elif (evt, evt_arg) != (None, None):
self.action = (evt, evt_arg)
self.blinker = self.blinker + 1 if self.blinker < self.fps else 0
surface = self.ui.compose(
self.view_field, self.colors,
self.chat.get_log(), self.prompt,
self.evt_mode, self.evt_mode_desc,
self.bottom_status_bar, self.top_status_bar,
self.target if self.blinker < self.fps / 2 else None,
self.look_pointer if self.blinker < self.fps / 2 else None)
self.display.draw(surface)
self.display.update()
#--------------------------------------------------------------------------
# state accessors
def add_chat_messages(self, messages):
self.chat.add_multiple(messages)
def set_bottom_status_bar(self, text):
self.bottom_status_bar = text
def set_command(self, command):
self.command = command
def set_look_pointer(self, (x, y)):
self.look_pointer = (x, y)
self.blinker = 0
