def test_xroad_audit_log(self):
'''
audit.log checking test. Checks if audit.log of a specified server contains specified (in configuration or
command-line parameters) entries. Test succeeds if all of the entries are found; fails otherwise.
:return: None
'''
main = MainController(self)
# Set test name and number
main.test_number = 'LOGCHECK'
main.test_name = self.__class__.__name__
# Get parameters from the configuration file.
# We can supply a "server" name to this test. This means that it uses this name as a category name and
# fetches ssh_host, ssh_user and ssh_pass of this category. For example, you can set audit.server=ss1 and
# the values that are used are ss1.ssh_host, ss1.ssh_user, and ss1.ssh_pass respectively.
audit_server = main.config.get('audit.server')
if audit_server is not None:
# audit.server was supplied so we're reading data from the sections
xroad_server = main.config.get('{0}.ssh_host'.format(audit_server))
ssh_username = main.config.get('{0}.ssh_user'.format(audit_server))
ssh_password = main.config.get('{0}.ssh_pass'.format(audit_server))
else:
# If audit.server was not supplied, we read each parameter separately
xroad_server = main.config.get('audit.ssh_host')
ssh_username = main.config.get('audit.ssh_user')
ssh_password = main.config.get('audit.ssh_pass')
# Get logfile
logfile = main.config.get('audit.logfile')
# Get data to be checked
check_json = main.config.get('audit.check-logs')
# Read data from this line
from_line = main.config.get_int('audit.from-line', 0)
# Because the supplied parameter may also be a string, use try-except
try:
check_entries = json.loads(check_json)
except (ValueError, TypeError):
check_entries = [check_json]
sys.exc_clear()
# Configure the service
test_audit_log = audit_log.test_audit_log(case=main, xroad_server=xroad_server, ssh_username=ssh_username,
ssh_password=ssh_password, logfile=logfile)
try:
# Run audit.log checking
test_audit_log(check_lines=check_entries, from_line=from_line)
except:
main.log('XroadAuditLog: audit.log check failed for: {0}'.format(check_json))
main.save_exception_data()
raise
finally:
# Test teardown
main.tearDown()
def test_deactivate_wsdl(self):
main = MainController(self)
# Set test name and number
main.test_number = '2.2.6'
main.test_name = self.__class__.__name__
ss_host = main.config.get('ss2.host')
ss_user = main.config.get('ss2.user')
ss_pass = main.config.get('ss2.pass')
client = xroad.split_xroad_id(main.config.get('ss2.client_id'))
requester = xroad.split_xroad_id(main.config.get('ss1.client_id'))
wsdl_url = main.config.get('wsdl.remote_path').format(
main.config.get('wsdl.service_wsdl'))
# Configure the service
test_deactivate_wsdl = deactivate_wsdl_2_2_6.test_disable_wsdl(
main, client=client, wsdl_url=wsdl_url, requester=requester)
test_reactivate_wsdl = deactivate_wsdl_2_2_6.test_enable_wsdl(
main, client=client, wsdl_url=wsdl_url, requester=requester)
try:
main.reload_webdriver(url=ss_host,
username=ss_user,
password=ss_pass)
test_deactivate_wsdl()
except:
main.log('XroadDeactivateWsdl: Failed to deactivate WSDL')
main.save_exception_data()
assert False
finally:
try:
main.reload_webdriver(url=ss_host,
username=ss_user,
password=ss_pass)
test_reactivate_wsdl()
except:
main.log('XroadDeactivateWsdl: Failed to reactivate WSDL')
main.save_exception_data()
assert False
finally:
# Test teardown
main.tearDown(save_exception=False)
def test_xroad_member_access(self):
main = MainController(self)
# Set test name and number
main.test_number = '2.2.9'
main.test_name = self.__class__.__name__
ss2_host = main.config.get('ss2.host')
ss2_user = main.config.get('ss2.user')
ss2_pass = main.config.get('ss2.pass')
wsdl_url = main.config.get('wsdl.remote_path').format(
main.config.get('wsdl.service_wsdl'))
service_name = main.config.get('services.test_service')
client = xroad.split_xroad_id(main.config.get('ss2.client_id'))
requester = xroad.split_xroad_id(main.config.get('ss2.client2_id'))
# Configure the test
test_xroad_member_access = xroad_member_access_2_2_9.test_xroad_member_access(
main,
client=client,
requester=requester,
wsdl_url=wsdl_url,
service_name=service_name)
# Set Security Server 2
main.reload_webdriver(url=ss2_host,
username=ss2_user,
password=ss2_pass)
try:
# Test local TLS
test_xroad_member_access()
except:
main.save_exception_data()
assert False
finally:
# Test teardown
main.tearDown(save_exception=False)
def test_tls_227(self):
main = MainController(self)
# Set test name and number
main.test_number = '2.2.7'
main.test_name = self.__class__.__name__
client = xroad.split_xroad_id(main.config.get('ss1.client_id'))
provider = xroad.split_xroad_id(main.config.get('ss2.client_id'))
# Configure the tests
test_local_tls = local_tls_2_2_7.test_tls(case=main,
client=client,
provider=provider)
delete_local_tls = local_tls_2_2_7.test_delete_tls(case=main,
client=client,
provider=provider)
try:
# Test local TLS
test_local_tls()
except:
main.log(
'XroadLocalTls: Failed to configure TLS for local service')
main.save_exception_data()
# Delete internal certificates from the servers
try:
delete_local_tls()
except:
main.save_exception_data()
main.log(
'XroadLocalTls: failed to remove TLS from local service')
assert False
finally:
# Test teardown
main.tearDown(save_exception=False)
def test_xroad_configure_service(self):
main = MainController(self)
# Set test name and number
main.test_number = '2.2.2'
main.test_name = self.__class__.__name__
ss_host = main.config.get('ss2.host')
ss_user = main.config.get('ss2.user')
ss_pass = main.config.get('ss2.pass')
client = xroad.split_xroad_id(main.config.get('ss2.client_id'))
requester = xroad.split_xroad_id(main.config.get('ss1.client_id'))
wsdl_url = main.config.get('wsdl.remote_path').format(main.config.get('wsdl.service_wsdl'))
service_name = main.config.get('services.test_service') # xroadGetRandom
service_2_name = main.config.get('services.test_service_2') # bodyMassIndex
subject_list = [xroad.get_xroad_subsystem(requester)]
# Configure the service
test_configure_service = configure_service_2_2_2.test_configure_service(case=main, client=client,
check_add_errors=False,
check_edit_errors=False,
check_parameter_errors=False,
service_name=service_name)
# Add the subject to ACL
test_configure_service_acl = add_to_acl_2_1_8.test_add_subjects(case=main, client=client,
wsdl_url=wsdl_url,
service_name=service_name,
service_subjects=subject_list,
remove_data=False,
allow_remove_all=False)
test_configure_service_acl_2 = add_to_acl_2_1_8.test_add_subjects(case=main, client=client,
wsdl_url=wsdl_url,
service_name=service_2_name,
service_subjects=subject_list,
remove_data=False,
allow_remove_all=False)
# Enable the service
test_enable_service = configure_service_2_2_2.test_enable_service(case=main, client=client, wsdl_url=wsdl_url)
# Delete the added service
test_delete_service = configure_service_2_2_2.test_delete_service(case=main, client=client, wsdl_url=wsdl_url)
try:
# Open webdriver
main.reload_webdriver(url=ss_host, username=ss_user, password=ss_pass)
# TEST PLAN 2.2.2-1, 2.2.2-2 add WSDL and configure service
test_configure_service()
# TEST PLAN 2.2.2-3 configure service ACL
main.log('2.2.2-3 configure service ACL')
main.reload_webdriver(url=ss_host, username=ss_user, password=ss_pass)
test_configure_service_acl()
# TEST PLAN 2.2.2-3 configure second service ACL
main.log('2.2.2-3 configure second service ACL')
main.reload_webdriver(url=ss_host, username=ss_user, password=ss_pass)
test_configure_service_acl_2()
# TEST PLAN 2.2.2-4 enable service
main.reload_webdriver(url=ss_host, username=ss_user, password=ss_pass)
test_enable_service()
except:
main.log('XroadConfigureService: Failed to configure service')
main.save_exception_data()
try:
# Delete service
main.reload_webdriver(url=ss_host, username=ss_user, password=ss_pass)
test_delete_service()
except:
main.log('XroadConfigureService: Failed to delete added data.')
main.save_exception_data()
assert False
finally:
# Test teardown
main.tearDown()
def test_add_central_service_2_2_8(self):
main = MainController(self)
# Set test name and number
main.test_number = '2.2.8'
main.test_name = self.__class__.__name__
cs_host = main.config.get('cs.host')
cs_user = main.config.get('cs.user')
cs_pass = main.config.get('cs.pass')
ss2_host = main.config.get('ss2.host')
ss2_user = main.config.get('ss2.user')
ss2_pass = main.config.get('ss2.pass')
requester = xroad.split_xroad_id(main.config.get('ss1.client_id'))
provider = xroad.split_xroad_id(main.config.get('services.central_service_provider_id'))
provider_2 = xroad.split_xroad_id(main.config.get('services.central_service_provider_2_id'))
service_name = main.config.get('services.test_service')
central_service_name = main.config.get('services.central_service')
wsdl_url = main.config.get('wsdl.remote_path').format(main.config.get('wsdl.service_wsdl'))
wait_sync_retry_delay = main.config.get('services.request_sync_delay')
sync_max_seconds = main.config.get('services.request_sync_timeout')
requester_id = xroad.get_xroad_subsystem(requester)
# Configure the service (2.2.8-1 to 2.2.8-3)
add_central_service = add_central_service_2_2_8.test_add_central_service(main, provider=provider,
requester=requester,
central_service_name=central_service_name,
sync_max_seconds=sync_max_seconds,
wait_sync_retry_delay=wait_sync_retry_delay)
# Configure a new service (2.2.8-4)
configure_service = configure_service_2_2_2.test_configure_service(main, client=provider_2,
service_name=service_name,
check_add_errors=False,
check_edit_errors=False,
check_parameter_errors=False)
# Add subject to ACL (2.2.8-4)
configure_service_acl = add_to_acl_2_1_8.test_add_subjects(main, client=provider_2, wsdl_url=wsdl_url,
service_name=service_name,
service_subjects=[requester_id],
remove_data=False, allow_remove_all=False)
# Enable new service (2.2.8-4)
enable_service = configure_service_2_2_2.test_enable_service(main, client=provider_2, wsdl_url=wsdl_url)
# Delete new service (undo the changes we made for 2.2.8-4)
delete_service = configure_service_2_2_2.test_delete_service(main, client=provider_2, wsdl_url=wsdl_url)
# Configure central service (2.2.8-5 to 2.2.8-6)
edit_central_service = add_central_service_2_2_8.test_edit_central_service(main,
provider=provider_2,
requester=requester,
central_service_name=central_service_name,
sync_max_seconds=sync_max_seconds,
wait_sync_retry_delay=wait_sync_retry_delay)
# Delete central service (undo changes we made for 2.2.8)
delete_central_service = add_central_service_2_2_8.test_delete_central_service(main,
central_service_name=central_service_name,
provider=provider_2,
requester=requester,
sync_max_seconds=sync_max_seconds,
wait_sync_retry_delay=wait_sync_retry_delay)
try:
# TEST PLAN 2.2.8-1, 2.2.8-2, 2.2.8-3 add central service
main.log('XroadAddCentralService: Add central service')
# Set Central Server UI
main.reload_webdriver(url=cs_host, username=cs_user, password=cs_pass)
add_central_service()
# TEST PLAN 2.2.8-4 configure new provider for central service
main.log('XroadAddCentralService: Configure service parameters (using 2.2.2)')
# Set Security Server 2 and configure service parameters
main.reload_webdriver(url=ss2_host, username=ss2_user, password=ss2_pass)
configure_service()
# TEST PLAN 2.2.8-4 configure new provider for central service (set access using ACL)
main.log('XroadAddCentralService: Configure service ACL (using 2.1.8)')
# Go to SS2 main page (no need to login again) and configure ACL
main.reload_webdriver(url=ss2_host)
configure_service_acl()
# TEST PLAN 2.2.8-4 enable the new provider service
main.log('XroadAddCentralService: Enable service (using 2.2.2)')
# Go to SS2 main page (no need to login again) and enable service
main.reload_webdriver(url=ss2_host)
enable_service()
# TEST PLAN 2.2.8-5, 2.2.8-6 edit and test the central service with the new provider
main.log('XroadAddCentralService: Edit central service')
# Go to CS main page (login again if necessary) and edit the central service
main.reload_webdriver(url=cs_host, username=cs_user, password=cs_pass)
edit_central_service()
except Exception, e:
main.log('XroadAddCentralService: Error, undoing changes')
main.save_exception_data()
try:
# Go to CS main page (login again if necessary) and edit the central service
main.reload_webdriver(url=cs_host, username=cs_user, password=cs_pass)
try:
# Delete central service
delete_central_service()
except:
main.log('XroadAddCentralService: Error deleting central service')
main.save_exception_data()
raise
finally:
try:
# Go to SS2 main page (re-login if necessary) and delete the newly created service
main.reload_webdriver(url=ss2_host, username=ss2_user, password=ss2_pass)
delete_service()
except:
main.log('XroadAddCentralService: Error deleting security server service')
main.save_exception_data()
assert False
except:
assert False
def test_refresh_wsdl(self):
main = MainController(self)
# Set test name and number
main.test_number = '2.2.5'
main.test_name = self.__class__.__name__
ss_host = main.config.get('ss2.host')
ss_user = main.config.get('ss2.user')
ss_pass = main.config.get('ss2.pass')
ssh_host = main.config.get('wsdl.ssh_host')
ssh_username = main.config.get('wsdl.ssh_user')
ssh_password = main.config.get('wsdl.ssh_pass')
client = xroad.split_xroad_id(main.config.get('ss2.client_id'))
requester = xroad.split_xroad_id(main.config.get('ss1.client_id'))
wsdl_remote_path = main.config.get('wsdl.remote_path')
wsdl_local_path = main.config.get('wsdl.local_path')
wsdl_filename = main.config.get('wsdl.service_wsdl')
wsdl_url = wsdl_remote_path.format(wsdl_filename)
wsdl_correct = main.config.get('wsdl.service_correct_filename')
wsdl_missing_service = main.config.get(
'wsdl.service_single_service_filename')
wsdl_error = main.config.get('wsdl.service_wsdl_error_filename')
wsdl_warning = main.config.get('wsdl.service_wsdl_warning_filename')
service_name = main.config.get('services.test_service_2')
service_2_name = main.config.get('services.test_service')
# Configure the service
test_refresh_wsdl = refresh_wsdl_2_2_5.test_refresh_wsdl(
main,
client=client,
wsdl_url=wsdl_url,
service_name=service_name,
service_name_2=service_2_name,
requester=requester,
wsdl_path=wsdl_remote_path,
wsdl_local_path=wsdl_local_path,
wsdl_filename=wsdl_filename,
wsdl_correct=wsdl_correct,
wsdl_missing_service=wsdl_missing_service,
wsdl_error=wsdl_error,
wsdl_warning=wsdl_warning,
ssh_host=ssh_host,
ssh_username=ssh_username,
ssh_password=ssh_password)
# Reset the service
test_reset_wsdl = refresh_wsdl_2_2_5.test_reset_wsdl(
main,
wsdl_local_path=wsdl_local_path,
wsdl_filename=wsdl_filename,
wsdl_correct=wsdl_correct,
ssh_host=ssh_host,
ssh_username=ssh_username,
ssh_password=ssh_password)
try:
main.reload_webdriver(url=ss_host,
username=ss_user,
password=ss_pass)
test_refresh_wsdl()
except:
main.log('XroadRefreshWsdl: Failed to refresh WSDL')
main.save_exception_data()
try:
test_reset_wsdl()
except:
main.log(
'XroadRefreshWsdl: Failed to reset WSDL to original file')
main.save_exception_data()
assert False
finally:
# Test teardown
main.tearDown(save_exception=False)