def add_linkLayer(apdu_list,
CA_text='00',
SA_text='00000001',
logic_addr=0,
SA_type=0,
C_text='43'):
"""add linklayer"""
SA_list = commonfun.text2list(SA_text)
SA_list.reverse() # 小端
SA_text = ''.join(SA_list)
if len(SA_text) % 2 == 1:
SA_text += '0'
L_text = '{0:04X}'.format(len(SA_text) // 2 + 9 + len(apdu_list))
L_text = L_text[2:4] + L_text[0:2]
SA_param_text = '{0:02X}'.format(((len(SA_text) // 2 - 1) & 0x0f)
| ((logic_addr & 0x03) << 4)
| ((SA_type & 0x03) << 6))
hcs_clac_aera_text = L_text + C_text + SA_param_text + SA_text + CA_text
hcs_calc = commonfun.get_fcs(commonfun.text2list(hcs_clac_aera_text))
hcs_calc = ((hcs_calc << 8) | (hcs_calc >> 8)) & 0xffff # 低位在前
fcs_calc_aera_text = hcs_clac_aera_text + '{0:04X}'.format(
hcs_calc) + commonfun.list2text(apdu_list)
fcs_calc = commonfun.get_fcs(commonfun.text2list(fcs_calc_aera_text))
fcs_calc = ((fcs_calc << 8) | (fcs_calc >> 8)) & 0xffff # 低位在前
return commonfun.format_text('68' + fcs_calc_aera_text +
'{0:04X}'.format(fcs_calc) + '16')
def repair_cs(m_text):
"""repair_cs"""
m_list = commonfun.text2list(m_text)
offset = 1
link_length = int(m_list[offset + 1] + m_list[offset], 16)
if link_length != len(m_list) - 2:
right_len = len(m_list) - 2
m_list[offset + 1] = '{0:02X}'.format(right_len >> 8)
m_list[offset] = '{0:02X}'.format(right_len & 0xff)
offset += 2
# 控制域
ctrol = int(m_list[offset], 16)
frame_separation_flag = (ctrol >> 5) & 0x01
# 控制域
offset += 1
# 地址域
server_addr_len = (int(m_list[offset], 16) & 0x0f) + 1
offset += server_addr_len + 1
# 客户机地址
offset += 1
# 帧头校验
hcs_calc = commonfun.get_fcs(m_list[1:offset])
hcs_calc = ((hcs_calc << 8) | (hcs_calc >> 8)) & 0xffff # 低位在前
hcs_now = int(m_list[offset] + m_list[offset + 1], 16)
if hcs_now != hcs_calc:
m_list[offset] = '{0:02X}'.format(hcs_calc >> 8)
m_list[offset + 1] = '{0:02X}'.format(hcs_calc & 0xff)
offset += 2
# 分帧
if frame_separation_flag == 1:
offset += 2
trans_res = commonfun.TransRes()
offset += applayer_do.take_applayer(m_list[offset:], trans_res)
fcs_calc = commonfun.get_fcs(m_list[1:offset])
fcs_calc = ((fcs_calc << 8) | (fcs_calc >> 8)) & 0xffff # 低位在前
fcs_now = int(m_list[offset] + m_list[offset + 1], 16)
if fcs_now != fcs_calc:
m_list[offset] = '{0:02X}'.format(fcs_calc >> 8)
m_list[offset + 1] = '{0:02X}'.format(fcs_calc & 0xff)
m_text = commonfun.list2text(m_list)
return m_text
def take_ssal_tail(m_list, offset, trans_res):
"""take_ssal_tail"""
offset_temp = offset
fcs_calc = commonfun.get_fcs(m_list[1:offset])
fcs_calc = ((fcs_calc << 8) | (fcs_calc >> 8)) & 0xffff # 低位在前
# print('fcs test:', m_list[1:offset], 'cs:', hex(fcs_calc))
fcs_now = int(m_list[offset] + m_list[offset + 1], 16)
if fcs_now == fcs_calc:
hcs_check = '(正确)'
else:
hcs_check = '(错误，正确值{0:04X})'.format(fcs_calc)
trans_res.add_row(m_list[offset: offset+2], '帧校验', '', '{0:04X}'.format(fcs_now) + hcs_check, priority=SSAL_PRIORITY)
offset += 2
trans_res.add_row(m_list[offset: offset+1], '结束符%s'%('(错误)' if m_list[offset] != '16' else ''),\
value=m_list[offset], priority=SSAL_PRIORITY)
offset += 1
return offset - offset_temp
def take_linklayer1(m_list, trans_res):
"""translate linklayer"""
offset = 0
trans_res.add_row(m_list[offset:offset + 1], '帧起始符', value=68, priority=0)
offset += 1
link_length = int(m_list[offset + 1] + m_list[offset], 16)
if link_length == len(m_list) - 2:
length_check = '(正确)'
else:
length_check = '(错误，正确值{0:d}({0:04X}))'.format(len(m_list) - 2)
trans_res.add_row(m_list[offset : offset+2], '长度L', '',\
int(m_list[offset + 1] + m_list[offset], 16), '字节' + length_check, priority=0)
offset += 2
# 控制域
ctrol = int(m_list[offset], 16)
dir_prm_flag = ctrol >> 6
frame_separation_flag = (ctrol >> 5) & 0x01
function_flag = ctrol & 0x03
frame_type = {0: '完整报文', 1: '分帧报文'}.get(frame_separation_flag, '错误')
function_type = ''
if function_flag == 1:
function_type = {0: '主站确认登录心跳', 2: '终端登录心跳'}.get(dir_prm_flag, '错误')
elif function_flag == 3:
function_type = {
0: '主站确认主动上报',
1: '主站向终端下发命令',
2: '终端主动上报',
3: '终端响应主站命令'
}.get(dir_prm_flag, '错误')
else:
function_type = '错误'
trans_res.add_row(m_list[offset:offset + 1],
'控制域C',
'',
frame_type + ',' + function_type,
priority=0)
offset += 1
# 地址域
server_addr_type = {
0: '单地址',
1: '通配地址',
2: '组地址',
3: '广播地址'
}.get(int(m_list[offset], 16) >> 6, '错误')
server_logic_addr = (int(m_list[offset], 16) >> 4) & 0x03
server_addr_len = (int(m_list[offset], 16) & 0x0f) + 1
server_addr_reverse = m_list[offset + server_addr_len:offset:-1]
server_addr = ''.join(server_addr_reverse)
trans_res.add_row(m_list[offset: offset+server_addr_len+1], '服务器地址', 'SA',\
'逻辑地址[%s], %s[%s]'%(server_logic_addr, server_addr_type, server_addr), priority=0)
offset += server_addr_len + 1
trans_res.add_row(m_list[offset:offset + 1],
'客户机地址',
'CA',
'{0:02X}'.format(int(m_list[offset], 16)),
priority=0)
offset += 1
# 帧头校验
# print('hcs_calc:', m_list[1:offset], 'len', offset - 1)
hcs_calc = commonfun.get_fcs(m_list[1:offset])
hcs_calc = ((hcs_calc << 8) | (hcs_calc >> 8)) & 0xffff # 低位在前
# print('fcs test:', m_list[1:offset], 'cs:', hex(hcs_calc))
fcs_now = int(m_list[offset] + m_list[offset + 1], 16)
if fcs_now == hcs_calc:
hcs_check = '(正确)'
else:
hcs_check = '(错误，正确值{0:04X})'.format(hcs_calc)
trans_res.add_row(m_list[offset:offset + 2],
'帧头校验',
'',
'{0:04X}'.format(fcs_now) + hcs_check,
priority=0)
offset += 2
# 分帧
if frame_separation_flag == 1:
frame_separation = int(m_list[offset + 1] + m_list[offset], 16)
frame_separation_seq = frame_separation & 0x3f
frame_separation_type = {
0: '(起始帧)',
1: '(最后帧)',
2: '(确认帧)',
3: '(中间帧)',
}.get(frame_separation >> 14, '错误')
trans_res.add_row(m_list[offset:offset + 2],
'分帧序号',
'',
str(frame_separation_seq) + frame_separation_type,
priority=0)
offset += 2
return offset
def take_ssal_head(m_list, trans_res):
"""translate ssal head"""
offset = 0
trans_res.add_row(m_list[offset : offset+1], '帧起始符', value=98, priority=SSAL_PRIORITY)
offset += 1
link_length = int(m_list[offset + 1] + m_list[offset], 16)
if link_length == len(m_list) - 4:
length_check = '(正确)'
else:
length_check = '(错误，正确值{0:d}({0:04X}))'.format(len(m_list) - 4)
trans_res.add_row(m_list[offset : offset+2], '长度L', '',\
link_length, '字节' + length_check, priority=SSAL_PRIORITY)
offset += 2
# seq
seq = int(m_list[offset + 1] + m_list[offset], 16)
trans_res.add_row(m_list[offset : offset+2], '帧序号', 'SEQ', seq, '', priority=SSAL_PRIORITY)
offset += 2
# 控制域
ctrol = int(m_list[offset + 1] + m_list[offset], 16)
ctrol_bin = bin(ctrol)[2:]
ctrol_bin = '0'*(16 - len(ctrol_bin)) + ctrol_bin
trans_res.add_row(m_list[offset: offset+2], '控制码', 'C', ctrol_bin, priority=SSAL_PRIORITY)
offset += 2
# 功能码
if commonfun.is_bit(ctrol, 15):
c_code = int(m_list[offset], 16)
c_dir = '上行' if commonfun.is_bit(c_code, 7) else '下行'
c_prm = '来自启动站' if commonfun.is_bit(c_code, 6) else '来自从动站'
c_trig = '可能触发协商' if commonfun.is_bit(c_code, 4) else '不触发协商'
c_type = {0: '应用数据报文', 1: '链路管理报文', 2: '获取终端基本信息报文', 3: '终端会话协商报文',
4: '更改时效门限', 5: '终端链路密钥更新', 6: '终端网关证书更新', 7: '查询网关链接状态',
8: '安全接入区设备密钥协商触发', 9: '网关链路心跳', 10: '终端会话申请', 11: '终端会话确认',
12: '网关查询指令'}.get(c_code & 0x0f, '未知报文类型%d'%(c_code & 0x0f))
trans_res.add_row(m_list[offset: offset+1], '功能码', 'FC',
'{dir}, {prm}, {trig}, {type}'.format(dir=c_dir, prm=c_prm, trig=c_trig, type=c_type), priority=SSAL_PRIORITY)
offset += 1
# 协议版本
if commonfun.is_bit(ctrol, 14):
sv_ver = '0x%02X'%int(m_list[offset + 1], 16)
sv_etype = {0: '明文', 1: 'CBC密文', 2: '明文+MAC', 3: 'ECB密文', 4: 'CBC密文+MAC', 5: 'ECB密文+MAC'}\
.get(int(m_list[offset], 16), '未知%d'%(int(m_list[offset], 16) & 0x0f))
trans_res.add_row(m_list[offset: offset+2], '协议版本', 'SV',
'SSAL协议版本:{ver}, 加密算法:{etype}'.format(ver=sv_ver, etype=sv_etype), priority=SSAL_PRIORITY)
offset += 2
# 设备地址类型
if commonfun.is_bit(ctrol, 13):
device_int = (int(m_list[offset + 1], 16) >> 3) & 0x1f
device_type = {0: '采集前置/通信后置', 1: '采集设备', 2: '现场服务终端（掌机）', 3: '移动办公设备(营业办公设备)',
4: '通信前置', 5: '3A认证服务器', 6: '在线性能检测服务器', 7: '接入区运维专用设备', 24: '网上国网APP终端', 25: '隔离装置'}\
.get(device_int, '未知%d'%device_int)
addr_int = int(m_list[offset + 1], 16) & 0x07
addr_type = {0: '单地址', 1: '组地址', 2: '广播地址'}\
.get(addr_int, '未知%d'%addr_int)
app_int = int(m_list[offset], 16) & 0x1f
app_ver = {0: '初始版本', 1: '698', 2: '1376.1', 3: '移动互联网APP'}\
.get(app_int, '未知%d'%app_int)
trans_res.add_row(m_list[offset: offset+2], '设备地址类型', 'DAT',
'设备类型:{device}, 地址类型:{addr}, 应用协议版本:{app}'.format(device=device_type, addr=addr_type, app=app_ver), priority=SSAL_PRIORITY)
offset += 2
# 设备地址
if commonfun.is_bit(ctrol, 12):
addr_len = (int(m_list[offset], 16) >> 4) & 0x07
logic_addr_len = int(m_list[offset], 16) & 0x0f
if device_int not in [1, 2, 3, 24] and addr_len == 4:
address = '%d.%d.%d.%d'%(int(m_list[offset+1 + 3], 16), int(m_list[offset+1 + 2], 16), int(m_list[offset+1 + 3], 16), int(m_list[offset+1], 16))
else:
address = ''.join(m_list[offset + 1: offset + 1 + logic_addr_len][::-1])
trans_res.add_row(m_list[offset: offset+1+logic_addr_len], '设备地址', 'DA', address, priority=SSAL_PRIORITY)
offset += 1 + logic_addr_len
# 源地址SA
if commonfun.is_bit(ctrol, 11):
s_port_len = (int(m_list[offset], 16) >> 5) & 0x07
s_addr_len = int(m_list[offset], 16) & 0x1f
offset += 1
if s_addr_len == 4: # 先这样判断是不是IP
s_addr = '%d.%d.%d.%d'%(int(m_list[offset + 3], 16), int(m_list[offset + 2], 16), int(m_list[offset + 1], 16), int(m_list[offset], 16))
else:
s_addr = ''.join(m_list[offset: offset + s_addr_len][::-1])
offset += s_addr_len
s_port = ' : ' + ''.join(m_list[offset: offset + s_port_len][::-1]) if s_port_len else ''
offset += s_port_len
trans_res.add_row(m_list[offset - s_port_len - s_addr_len - 1: offset], '源地址', 'SA', s_addr + s_port, priority=SSAL_PRIORITY)
# 目的地址TA
if commonfun.is_bit(ctrol, 10):
t_port_len = (int(m_list[offset], 16) >> 5) & 0x07
t_addr_len = int(m_list[offset], 16) & 0x1f
offset += 1
if t_addr_len == 4: # 先这样判断是不是IP
t_addr = '%d.%d.%d.%d'%(int(m_list[offset + 3], 16), int(m_list[offset + 2], 16), int(m_list[offset + 1], 16), int(m_list[offset], 16))
else:
t_addr = ''.join(m_list[offset: offset + t_addr_len][::-1])
offset += t_addr_len
t_port = ' : ' + ''.join(m_list[offset: offset + t_port_len][::-1]) if t_port_len else ''
offset += t_port_len
trans_res.add_row(m_list[offset - t_port_len - t_addr_len - 1: offset], '目的地址', 'TA', t_addr + t_port, priority=SSAL_PRIORITY)
# 通信信息
if commonfun.is_bit(ctrol, 9):
ci_type_int = (int(m_list[offset], 16) >> 5) & 0x0f
ci_type = {0: '无信道信息', 1: '无线公网', 2: '专网', 3: '230', 4: '短信', 5: '北斗'}\
.get(ci_type_int, '未知%d'%device_int)
ci_len = int(m_list[offset], 16) & 0x0f
ci_content = ''.join(m_list[offset+1: offset+1 + ci_len])
trans_res.add_row(m_list[offset: offset+1 + ci_len], '通信信息', 'CI', '类型:%s, 内容:%s'%(ci_type, ci_content), priority=SSAL_PRIORITY)
offset += 1 + ci_len
# 时间标签
if commonfun.is_bit(ctrol, 8):
tp_str = '%d-%d-%d %d:%d:%d'%(int(m_list[offset] + m_list[offset+1], 16), int(m_list[offset+2], 16),
int(m_list[offset+3], 16), int(m_list[offset+4], 16), int(m_list[offset+5], 16), int(m_list[offset+6], 16))
trans_res.add_row(m_list[offset: offset + 7], '时间标签', 'TP', tp_str, priority=SSAL_PRIORITY)
offset += 7
# 网关地址
if commonfun.is_bit(ctrol, 7):
ga_len = int(m_list[offset], 16) & 0x1f
if ga_len == 4:
ga_content = '%d.%d.%d.%d'%(int(m_list[offset+1 + 3], 16), int(m_list[offset+1 + 2], 16), int(m_list[offset+1 + 1], 16), int(m_list[offset+1], 16))
else:
ga_content = ''.join(m_list[offset+1: offset+1 + ga_len])
trans_res.add_row(m_list[offset: offset+1 + ga_len], '网关地址', 'GA', ga_content, priority=SSAL_PRIORITY)
offset += 1 + ga_len
# 帧头校验
# print('hcs_calc:', m_list[1:offset], 'len', offset - 1)
hcs_calc = commonfun.get_fcs(m_list[1:offset])
hcs_calc = ((hcs_calc << 8) | (hcs_calc >> 8)) & 0xffff # 低位在前
# print('fcs test:', m_list[1:offset], 'cs:', hex(hcs_calc))
fcs_now = int(m_list[offset] + m_list[offset + 1], 16)
if fcs_now == hcs_calc:
hcs_check = '(正确)'
else:
hcs_check = '(错误，正确值{0:04X})'.format(hcs_calc)
trans_res.add_row(m_list[offset: offset+2], '帧头校验', 'HCS', '{0:04X}'.format(fcs_now) + hcs_check, priority=SSAL_PRIORITY)
offset += 2
return offset