def addDrivenGroup(node): """add driven group, pad, above the provided node for direct connection Args: node (str): name of node to add group above Returns: str: of node created """ parentOfTarget = mc.listRelatives(node, p=True) or None if not parentOfTarget: return node if node.endswith(CTL_SUFFIX): drivenName = node.replace(CTL_SUFFIX, DRIVEN_SUFFIX) else: drivenName = "{}{}".format(node, DRIVEN_SUFFIX) if not mc.objExists(drivenName): drivenName = mc.group(name=drivenName, p=parentOfTarget[0], em=True) attribute.add_mirror_config_channels(pm.PyNode(drivenName)) for attr in mc.listAttr(node, userDefined=True) or []: if not mc.objExists("{}.{}".format(drivenName, attr)): add_attribute(node, drivenName, attr) if node.endswith(CTL_SUFFIX): copyInverseMirrorAttrs(node, drivenName) mc.parent(node, drivenName) return drivenName
def addDrivenGroup(node): """add driven group, pad, above the provided node for direct connection Args: node (str): name of node to add group above Returns: str: of node created """ node = pm.PyNode(node) parentOfTarget = pm.listRelatives(node, p=True) or None if parentOfTarget: parentOfTarget = parentOfTarget[0] if node.endswith(CTL_SUFFIX): drivenName = node.replace(CTL_SUFFIX, DRIVEN_SUFFIX) else: drivenName = "{}{}".format(node, DRIVEN_SUFFIX) if parentOfTarget is None: parentOfTarget = pm.group(name=drivenName.replace( DRIVEN_SUFFIX, DRIVEN_PAR_SUFFIX), w=True, em=True) else: parentOfTarget = pm.group(name=drivenName.replace( DRIVEN_SUFFIX, DRIVEN_PAR_SUFFIX), p=parentOfTarget, em=True) parentOfTarget.setMatrix(node.getMatrix(worldSpace=True), worldSpace=True) drivenName = pm.group(name=drivenName, p=parentOfTarget, em=True) attribute.add_mirror_config_channels(pm.PyNode(drivenName)) for attr in pm.listAttr(node, userDefined=True) or []: if not mc.objExists("{}.{}".format(drivenName, attr)): add_attribute(node.name(), drivenName, attr) if node.endswith(CTL_SUFFIX): copyInverseMirrorAttrs(node, drivenName) pm.parent(node, drivenName) return drivenName.name()
def addDrivenGroup(node, drivenName=None): """add driven group, pad, above the provided node for direct connection Args: node (str): name of node to add group above Returns: str: of node created """ node = pm.PyNode(node) parentOfTarget = pm.listRelatives(node, p=True) or None if parentOfTarget: parentOfTarget = parentOfTarget[0] drivenName = drivenName or get_driven_group_name(node) if parentOfTarget is None: parentOfTarget = pm.group(name=drivenName.replace( DRIVEN_SUFFIX, DRIVEN_PAR_SUFFIX), w=True, em=True) else: parentOfTarget = pm.group(name=drivenName.replace( DRIVEN_SUFFIX, DRIVEN_PAR_SUFFIX), p=parentOfTarget, em=True) parentOfTarget.setMatrix(node.getMatrix(worldSpace=True), worldSpace=True) drivenName = pm.group(name=drivenName, p=parentOfTarget, em=True) attribute.add_mirror_config_channels(pm.PyNode(drivenName)) if node.endswith(CTL_SUFFIX): copyInverseMirrorAttrs(node, drivenName) pm.parent(node, drivenName) return drivenName.name()
def addCtl(self, parent, name, m, color, iconShape, tp=None, lp=True, mirrorConf=[0, 0, 0, 0, 0, 0, 0, 0, 0], ** kwargs): """ Create the control and apply the shape, if this is alrealdy stored in the guide controllers grp. Args: parent (dagNode): The control parent name (str): The control name. m (matrix): The transfromation matrix for the control. color (int or list of float): The color for the control in index or RGB. iconShape (str): The controls default shape. tp (dagNode): Tag Parent Control object to connect as a parent controller lp (bool): Lock the parent controller channels kwargs (variant): Other arguments for the iconShape type variations Returns: dagNode: The Control. """ if "degree" not in kwargs.keys(): kwargs["degree"] = 1 fullName = self.getName(name) bufferName = fullName + "_controlBuffer" if bufferName in self.rig.guide.controllers.keys(): ctl_ref = self.rig.guide.controllers[bufferName] ctl = primitive.addTransform(parent, fullName, m) for shape in ctl_ref.getShapes(): ctl.addChild(shape, shape=True, add=True) pm.rename(shape, fullName + "Shape") icon.setcolor(ctl, color) else: ctl = icon.create( parent, fullName, m, color, iconShape, **kwargs) # add metadata attirbutes. attribute.addAttribute(ctl, "isCtl", "bool", keyable=False) attribute.addAttribute(ctl, "uiHost", "string", keyable=False) # create the attributes to handlde mirror and symetrical pose attribute.add_mirror_config_channels(ctl, mirrorConf) if self.settings["ctlGrp"]: ctlGrp = self.settings["ctlGrp"] self.addToGroup(ctl, ctlGrp, "controllers") else: ctlGrp = "controllers" self.addToGroup(ctl, ctlGrp) # lock the control parent attributes if is not a control if parent not in self.groups[ctlGrp] and lp: self.transform2Lock.append(parent) # Set the control shapes isHistoricallyInteresting for oShape in ctl.getShapes(): oShape.isHistoricallyInteresting.set(False) # set controller tag if versions.current() >= 201650: try: oldTag = pm.PyNode(ctl.name() + "_tag") if not oldTag.controllerObject.connections(): # NOTE: The next line is comment out. Because this will # happend alot since core does't clean # controller tags after deleting the control Object of the # tag. This have been log to Autodesk. # If orphane tags are found, it will be clean in silence. # pm.displayWarning("Orphane Tag: %s will be delete and # created new for: %s"%(oldTag.name(), ctl.name())) pm.delete(oldTag) except TypeError: pass self.add_controller_tag(ctl, tp) self.controlers.append(ctl) return ctl
def eyeRig(eyeMesh, edgeLoop, blinkH, namePrefix, offset, rigidLoops, falloffLoops, headJnt, doSkin, parent=None, ctlName="ctl", sideRange=False, customCorner=False, intCorner=None, extCorner=None, ctlGrp=None, defGrp=None): """Create eyelid and eye rig Args: eyeMesh (TYPE): Description edgeLoop (TYPE): Description blinkH (TYPE): Description namePrefix (TYPE): Description offset (TYPE): Description rigidLoops (TYPE): Description falloffLoops (TYPE): Description headJnt (TYPE): Description doSkin (TYPE): Description parent (None, optional): Description ctlName (str, optional): Description sideRange (bool, optional): Description customCorner (bool, optional): Description intCorner (None, optional): Description extCorner (None, optional): Description ctlGrp (None, optional): Description defGrp (None, optional): Description Returns: TYPE: Description """ # Checkers if edgeLoop: edgeLoopList = [pm.PyNode(e) for e in edgeLoop.split(",")] else: pm.displayWarning("Please set the edge loop first") return if eyeMesh: try: eyeMesh = pm.PyNode(eyeMesh) except pm.MayaNodeError: pm.displayWarning("The object %s can not be found in the " "scene" % (eyeMesh)) return else: pm.displayWarning("Please set the eye mesh first") if doSkin: if not headJnt: pm.displayWarning("Please set the Head Jnt or unCheck " "Compute Topological Autoskin") return # Initial Data bboxCenter = meshNavigation.bboxCenter(eyeMesh) extr_v = meshNavigation.getExtremeVertexFromLoop(edgeLoopList, sideRange) upPos = extr_v[0] lowPos = extr_v[1] inPos = extr_v[2] outPos = extr_v[3] edgeList = extr_v[4] vertexList = extr_v[5] # Detect the side L or R from the x value if inPos.getPosition(space='world')[0] < 0.0: side = "R" inPos = extr_v[3] outPos = extr_v[2] normalPos = outPos npw = normalPos.getPosition(space='world') normalVec = npw - bboxCenter else: side = "L" normalPos = outPos npw = normalPos.getPosition(space='world') normalVec = bboxCenter - npw # Manual Vertex corners if customCorner: if intCorner: try: if side == "R": inPos = pm.PyNode(extCorner) else: inPos = pm.PyNode(intCorner) except pm.MayaNodeError: pm.displayWarning("%s can not be found" % intCorner) return else: pm.displayWarning("Please set the internal eyelid corner") return if extCorner: try: normalPos = pm.PyNode(extCorner) npw = normalPos.getPosition(space='world') if side == "R": outPos = pm.PyNode(intCorner) normalVec = npw - bboxCenter else: outPos = pm.PyNode(extCorner) normalVec = bboxCenter - npw except pm.MayaNodeError: pm.displayWarning("%s can not be found" % extCorner) return else: pm.displayWarning("Please set the external eyelid corner") return # Check if we have prefix: if namePrefix: namePrefix = string.removeInvalidCharacter(namePrefix) else: pm.displayWarning("Prefix is needed") return def setName(name, ind=None): namesList = [namePrefix, side, name] if ind is not None: namesList[1] = side + str(ind) name = "_".join(namesList) return name if pm.ls(setName("root")): pm.displayWarning("The object %s already exist in the scene. Please " "choose another name prefix" % setName("root")) return # Eye root eye_root = primitive.addTransform(None, setName("root")) eyeCrv_root = primitive.addTransform(eye_root, setName("crvs")) # Eyelid Main crvs try: upEyelid = meshNavigation.edgeRangeInLoopFromMid( edgeList, upPos, inPos, outPos) upCrv = curve.createCurveFromOrderedEdges(upEyelid, inPos, setName("upperEyelid"), parent=eyeCrv_root) upCrv_ctl = curve.createCurveFromOrderedEdges(upEyelid, inPos, setName("upCtl_crv"), parent=eyeCrv_root) pm.rebuildCurve(upCrv_ctl, s=2, rt=0, rpo=True, ch=False) lowEyelid = meshNavigation.edgeRangeInLoopFromMid( edgeList, lowPos, inPos, outPos) lowCrv = curve.createCurveFromOrderedEdges(lowEyelid, inPos, setName("lowerEyelid"), parent=eyeCrv_root) lowCrv_ctl = curve.createCurveFromOrderedEdges(lowEyelid, inPos, setName("lowCtl_crv"), parent=eyeCrv_root) pm.rebuildCurve(lowCrv_ctl, s=2, rt=0, rpo=True, ch=False) except UnboundLocalError: if customCorner: pm.displayWarning("This error is maybe caused because the custom " "Corner vertex is not part of the edge loop") pm.displayError(traceback.format_exc()) return upBlink = curve.createCurveFromCurve(upCrv, setName("upblink_crv"), nbPoints=30, parent=eyeCrv_root) lowBlink = curve.createCurveFromCurve(lowCrv, setName("lowBlink_crv"), nbPoints=30, parent=eyeCrv_root) upTarget = curve.createCurveFromCurve(upCrv, setName("upblink_target"), nbPoints=30, parent=eyeCrv_root) lowTarget = curve.createCurveFromCurve(lowCrv, setName("lowBlink_target"), nbPoints=30, parent=eyeCrv_root) midTarget = curve.createCurveFromCurve(lowCrv, setName("midBlink_target"), nbPoints=30, parent=eyeCrv_root) rigCrvs = [ upCrv, lowCrv, upCrv_ctl, lowCrv_ctl, upBlink, lowBlink, upTarget, lowTarget, midTarget ] for crv in rigCrvs: crv.attr("visibility").set(False) # localBBOX localBBox = eyeMesh.getBoundingBox(invisible=True, space='world') wRadius = abs((localBBox[0][0] - localBBox[1][0])) dRadius = abs((localBBox[0][1] - localBBox[1][1]) / 1.7) # Groups if not ctlGrp: ctlGrp = "rig_controllers_grp" try: ctlSet = pm.PyNode(ctlGrp) except pm.MayaNodeError: pm.sets(n=ctlGrp, em=True) ctlSet = pm.PyNode(ctlGrp) if not defGrp: defGrp = "rig_deformers_grp" try: defset = pm.PyNode(defGrp) except pm.MayaNodeError: pm.sets(n=defGrp, em=True) defset = pm.PyNode(defGrp) # Calculate center looking at averagePosition = ( (upPos.getPosition(space='world') + lowPos.getPosition(space='world') + inPos.getPosition(space='world') + outPos.getPosition(space='world')) / 4) if side == "R": negate = False offset = offset over_offset = dRadius else: negate = False over_offset = dRadius if side == "R" and sideRange or side == "R" and customCorner: axis = "z-x" # axis = "zx" else: axis = "z-x" t = transform.getTransformLookingAt(bboxCenter, averagePosition, normalVec, axis=axis, negate=negate) over_npo = primitive.addTransform(eye_root, setName("center_lookatRoot"), t) over_ctl = icon.create(over_npo, setName("over_%s" % ctlName), t, icon="square", w=wRadius, d=dRadius, ro=datatypes.Vector(1.57079633, 0, 0), po=datatypes.Vector(0, 0, over_offset), color=4) node.add_controller_tag(over_ctl) attribute.add_mirror_config_channels(over_ctl) attribute.setKeyableAttributes( over_ctl, params=["tx", "ty", "tz", "ro", "rx", "ry", "rz", "sx", "sy", "sz"]) if side == "R": over_npo.attr("rx").set(over_npo.attr("rx").get() * -1) over_npo.attr("ry").set(over_npo.attr("ry").get() + 180) over_npo.attr("sz").set(-1) if len(ctlName.split("_")) == 2 and ctlName.split("_")[-1] == "ghost": pass else: pm.sets(ctlSet, add=over_ctl) center_lookat = primitive.addTransform(over_ctl, setName("center_lookat"), t) # Tracking # Eye aim control t_arrow = transform.getTransformLookingAt(bboxCenter, averagePosition, upPos.getPosition(space='world'), axis="zy", negate=False) radius = abs((localBBox[0][0] - localBBox[1][0]) / 1.7) arrow_npo = primitive.addTransform(eye_root, setName("aim_npo"), t_arrow) arrow_ctl = icon.create(arrow_npo, setName("aim_%s" % ctlName), t_arrow, icon="arrow", w=1, po=datatypes.Vector(0, 0, radius), color=4) if len(ctlName.split("_")) == 2 and ctlName.split("_")[-1] == "ghost": pass else: pm.sets(ctlSet, add=arrow_ctl) attribute.setKeyableAttributes(arrow_ctl, params=["rx", "ry", "rz"]) # tracking custom trigger if side == "R": tt = t_arrow else: tt = t aimTrigger_root = primitive.addTransform(center_lookat, setName("aimTrigger_root"), tt) aimTrigger_lvl = primitive.addTransform(aimTrigger_root, setName("aimTrigger_lvl"), tt) aimTrigger_lvl.attr("tz").set(1.0) aimTrigger_ref = primitive.addTransform(aimTrigger_lvl, setName("aimTrigger_ref"), tt) aimTrigger_ref.attr("tz").set(0.0) # connect trigger with arrow_ctl pm.parentConstraint(arrow_ctl, aimTrigger_ref, mo=True) # Controls lists upControls = [] trackLvl = [] # upper eyelid controls upperCtlNames = ["inCorner", "upInMid", "upMid", "upOutMid", "outCorner"] cvs = upCrv_ctl.getCVs(space="world") if side == "R" and not sideRange: # if side == "R": cvs = [cv for cv in reversed(cvs)] for i, cv in enumerate(cvs): if utils.is_odd(i): color = 14 wd = .5 icon_shape = "circle" params = ["tx", "ty", "tz"] else: color = 4 wd = .7 icon_shape = "square" params = [ "tx", "ty", "tz", "ro", "rx", "ry", "rz", "sx", "sy", "sz" ] t = transform.setMatrixPosition(t, cvs[i]) npo = primitive.addTransform(center_lookat, setName("%s_npo" % upperCtlNames[i]), t) npoBase = npo if i == 2: # we add an extra level to input the tracking ofset values npo = primitive.addTransform(npo, setName("%s_trk" % upperCtlNames[i]), t) trackLvl.append(npo) ctl = icon.create(npo, setName("%s_%s" % (upperCtlNames[i], ctlName)), t, icon=icon_shape, w=wd, d=wd, ro=datatypes.Vector(1.57079633, 0, 0), po=datatypes.Vector(0, 0, offset), color=color) attribute.add_mirror_config_channels(ctl) node.add_controller_tag(ctl, over_ctl) upControls.append(ctl) if len(ctlName.split("_")) == 2 and ctlName.split("_")[-1] == "ghost": pass else: pm.sets(ctlSet, add=ctl) attribute.setKeyableAttributes(ctl, params) if side == "R": npoBase.attr("ry").set(180) npoBase.attr("sz").set(-1) # adding parent average contrains to odd controls for i, ctl in enumerate(upControls): if utils.is_odd(i): cns_node = pm.parentConstraint(upControls[i - 1], upControls[i + 1], ctl.getParent(), mo=True) # Make the constraint "noFlip" cns_node.interpType.set(0) # lower eyelid controls lowControls = [upControls[0]] lowerCtlNames = [ "inCorner", "lowInMid", "lowMid", "lowOutMid", "outCorner" ] cvs = lowCrv_ctl.getCVs(space="world") if side == "R" and not sideRange: cvs = [cv for cv in reversed(cvs)] for i, cv in enumerate(cvs): # we skip the first and last point since is already in the uper eyelid if i in [0, 4]: continue if utils.is_odd(i): color = 14 wd = .5 icon_shape = "circle" params = ["tx", "ty", "tz"] else: color = 4 wd = .7 icon_shape = "square" params = [ "tx", "ty", "tz", "ro", "rx", "ry", "rz", "sx", "sy", "sz" ] t = transform.setMatrixPosition(t, cvs[i]) npo = primitive.addTransform(center_lookat, setName("%s_npo" % lowerCtlNames[i]), t) npoBase = npo if i == 2: # we add an extra level to input the tracking ofset values npo = primitive.addTransform(npo, setName("%s_trk" % lowerCtlNames[i]), t) trackLvl.append(npo) ctl = icon.create(npo, setName("%s_%s" % (lowerCtlNames[i], ctlName)), t, icon=icon_shape, w=wd, d=wd, ro=datatypes.Vector(1.57079633, 0, 0), po=datatypes.Vector(0, 0, offset), color=color) attribute.add_mirror_config_channels(ctl) lowControls.append(ctl) if len(ctlName.split("_")) == 2 and ctlName.split("_")[-1] == "ghost": pass else: pm.sets(ctlSet, add=ctl) attribute.setKeyableAttributes(ctl, params) # mirror behaviout on R side controls if side == "R": npoBase.attr("ry").set(180) npoBase.attr("sz").set(-1) for lctl in reversed(lowControls[1:]): node.add_controller_tag(lctl, over_ctl) lowControls.append(upControls[-1]) # adding parent average contrains to odd controls for i, ctl in enumerate(lowControls): if utils.is_odd(i): cns_node = pm.parentConstraint(lowControls[i - 1], lowControls[i + 1], ctl.getParent(), mo=True) # Make the constraint "noFlip" cns_node.interpType.set(0) # Connecting control crvs with controls applyop.gear_curvecns_op(upCrv_ctl, upControls) applyop.gear_curvecns_op(lowCrv_ctl, lowControls) # adding wires w1 = pm.wire(upCrv, w=upBlink)[0] w2 = pm.wire(lowCrv, w=lowBlink)[0] w3 = pm.wire(upTarget, w=upCrv_ctl)[0] w4 = pm.wire(lowTarget, w=lowCrv_ctl)[0] # adding blendshapes bs_upBlink = pm.blendShape(upTarget, midTarget, upBlink, n="blendShapeUpBlink") bs_lowBlink = pm.blendShape(lowTarget, midTarget, lowBlink, n="blendShapeLowBlink") bs_mid = pm.blendShape(lowTarget, upTarget, midTarget, n="blendShapeLowBlink") # setting blendshape reverse connections rev_node = pm.createNode("reverse") pm.connectAttr(bs_upBlink[0].attr(midTarget.name()), rev_node + ".inputX") pm.connectAttr(rev_node + ".outputX", bs_upBlink[0].attr(upTarget.name())) rev_node = pm.createNode("reverse") pm.connectAttr(bs_lowBlink[0].attr(midTarget.name()), rev_node + ".inputX") pm.connectAttr(rev_node + ".outputX", bs_lowBlink[0].attr(lowTarget.name())) rev_node = pm.createNode("reverse") pm.connectAttr(bs_mid[0].attr(upTarget.name()), rev_node + ".inputX") pm.connectAttr(rev_node + ".outputX", bs_mid[0].attr(lowTarget.name())) # setting default values bs_mid[0].attr(upTarget.name()).set(blinkH) # joints root jnt_root = primitive.addTransformFromPos(eye_root, setName("joints"), pos=bboxCenter) # head joint if headJnt: try: headJnt = pm.PyNode(headJnt) jnt_base = headJnt except pm.MayaNodeError: pm.displayWarning("Aborted can not find %s " % headJnt) return else: # Eye root jnt_base = jnt_root eyeTargets_root = primitive.addTransform(eye_root, setName("targets")) eyeCenter_jnt = rigbits.addJnt(arrow_ctl, jnt_base, grp=defset, jntName=setName("center_jnt")) # Upper Eyelid joints ################################################## cvs = upCrv.getCVs(space="world") upCrv_info = node.createCurveInfoNode(upCrv) # aim constrain targets and joints upperEyelid_aimTargets = [] upperEyelid_jnt = [] upperEyelid_jntRoot = [] for i, cv in enumerate(cvs): # aim targets trn = primitive.addTransformFromPos(eyeTargets_root, setName("upEyelid_aimTarget", i), pos=cv) upperEyelid_aimTargets.append(trn) # connecting positions with crv pm.connectAttr(upCrv_info + ".controlPoints[%s]" % str(i), trn.attr("translate")) # joints jntRoot = primitive.addJointFromPos(jnt_root, setName("upEyelid_jnt_base", i), pos=bboxCenter) jntRoot.attr("radius").set(.08) jntRoot.attr("visibility").set(False) upperEyelid_jntRoot.append(jntRoot) applyop.aimCns(jntRoot, trn, axis="zy", wupObject=jnt_root) jnt_ref = primitive.addJointFromPos(jntRoot, setName("upEyelid_jnt_ref", i), pos=cv) jnt_ref.attr("radius").set(.08) jnt_ref.attr("visibility").set(False) jnt = rigbits.addJnt(jnt_ref, jnt_base, grp=defset, jntName=setName("upEyelid_jnt", i)) upperEyelid_jnt.append(jnt) # Lower Eyelid joints ################################################## cvs = lowCrv.getCVs(space="world") lowCrv_info = node.createCurveInfoNode(lowCrv) # aim constrain targets and joints lowerEyelid_aimTargets = [] lowerEyelid_jnt = [] lowerEyelid_jntRoot = [] for i, cv in enumerate(cvs): if i in [0, len(cvs) - 1]: continue # aim targets trn = primitive.addTransformFromPos(eyeTargets_root, setName("lowEyelid_aimTarget", i), pos=cv) lowerEyelid_aimTargets.append(trn) # connecting positions with crv pm.connectAttr(lowCrv_info + ".controlPoints[%s]" % str(i), trn.attr("translate")) # joints jntRoot = primitive.addJointFromPos(jnt_root, setName("lowEyelid_base", i), pos=bboxCenter) jntRoot.attr("radius").set(.08) jntRoot.attr("visibility").set(False) lowerEyelid_jntRoot.append(jntRoot) applyop.aimCns(jntRoot, trn, axis="zy", wupObject=jnt_root) jnt_ref = primitive.addJointFromPos(jntRoot, setName("lowEyelid_jnt_ref", i), pos=cv) jnt_ref.attr("radius").set(.08) jnt_ref.attr("visibility").set(False) jnt = rigbits.addJnt(jnt_ref, jnt_base, grp=defset, jntName=setName("lowEyelid_jnt", i)) lowerEyelid_jnt.append(jnt) # Channels # Adding and connecting attributes for the blink up_ctl = upControls[2] blink_att = attribute.addAttribute(over_ctl, "blink", "float", 0, minValue=0, maxValue=1) blinkMult_att = attribute.addAttribute(over_ctl, "blinkMult", "float", 1, minValue=1, maxValue=2) midBlinkH_att = attribute.addAttribute(over_ctl, "blinkHeight", "float", blinkH, minValue=0, maxValue=1) mult_node = node.createMulNode(blink_att, blinkMult_att) pm.connectAttr(mult_node + ".outputX", bs_upBlink[0].attr(midTarget.name())) pm.connectAttr(mult_node + ".outputX", bs_lowBlink[0].attr(midTarget.name())) pm.connectAttr(midBlinkH_att, bs_mid[0].attr(upTarget.name())) low_ctl = lowControls[2] # Adding channels for eye tracking upVTracking_att = attribute.addAttribute(up_ctl, "vTracking", "float", .02, minValue=0, maxValue=1, keyable=False, channelBox=True) upHTracking_att = attribute.addAttribute(up_ctl, "hTracking", "float", .01, minValue=0, maxValue=1, keyable=False, channelBox=True) lowVTracking_att = attribute.addAttribute(low_ctl, "vTracking", "float", .01, minValue=0, maxValue=1, keyable=False, channelBox=True) lowHTracking_att = attribute.addAttribute(low_ctl, "hTracking", "float", .01, minValue=0, maxValue=1, keyable=False, channelBox=True) mult_node = node.createMulNode(upVTracking_att, aimTrigger_ref.attr("ty")) pm.connectAttr(mult_node + ".outputX", trackLvl[0].attr("ty")) mult_node = node.createMulNode(upHTracking_att, aimTrigger_ref.attr("tx")) pm.connectAttr(mult_node + ".outputX", trackLvl[0].attr("tx")) mult_node = node.createMulNode(lowVTracking_att, aimTrigger_ref.attr("ty")) pm.connectAttr(mult_node + ".outputX", trackLvl[1].attr("ty")) mult_node = node.createMulNode(lowHTracking_att, aimTrigger_ref.attr("tx")) pm.connectAttr(mult_node + ".outputX", trackLvl[1].attr("tx")) # Tension on blink node.createReverseNode(blink_att, w1.scale[0]) node.createReverseNode(blink_att, w3.scale[0]) node.createReverseNode(blink_att, w2.scale[0]) node.createReverseNode(blink_att, w4.scale[0]) ########################################### # Reparenting ########################################### if parent: try: if isinstance(parent, basestring): parent = pm.PyNode(parent) parent.addChild(eye_root) except pm.MayaNodeError: pm.displayWarning("The eye rig can not be parent to: %s. Maybe " "this object doesn't exist." % parent) ########################################### # Auto Skinning ########################################### if doSkin: # eyelid vertex rows totalLoops = rigidLoops + falloffLoops vertexLoopList = meshNavigation.getConcentricVertexLoop( vertexList, totalLoops) vertexRowList = meshNavigation.getVertexRowsFromLoops(vertexLoopList) # we set the first value 100% for the first initial loop skinPercList = [1.0] # we expect to have a regular grid topology for r in range(rigidLoops): for rr in range(2): skinPercList.append(1.0) increment = 1.0 / float(falloffLoops) # we invert to smooth out from 100 to 0 inv = 1.0 - increment for r in range(falloffLoops): for rr in range(2): if inv < 0.0: inv = 0.0 skinPercList.append(inv) inv -= increment # this loop add an extra 0.0 indices to avoid errors for r in range(10): for rr in range(2): skinPercList.append(0.0) # base skin geo = pm.listRelatives(edgeLoopList[0], parent=True)[0] # Check if the object has a skinCluster objName = pm.listRelatives(geo, parent=True)[0] skinCluster = skin.getSkinCluster(objName) if not skinCluster: skinCluster = pm.skinCluster(headJnt, geo, tsb=True, nw=2, n='skinClsEyelid') eyelidJoints = upperEyelid_jnt + lowerEyelid_jnt pm.progressWindow(title='Auto skinning process', progress=0, max=len(eyelidJoints)) firstBoundary = False for jnt in eyelidJoints: pm.progressWindow(e=True, step=1, status='\nSkinning %s' % jnt) skinCluster.addInfluence(jnt, weight=0) v = meshNavigation.getClosestVertexFromTransform(geo, jnt) for row in vertexRowList: if v in row: it = 0 # iterator inc = 1 # increment for i, rv in enumerate(row): try: perc = skinPercList[it] t_val = [(jnt, perc), (headJnt, 1.0 - perc)] pm.skinPercent(skinCluster, rv, transformValue=t_val) if rv.isOnBoundary(): # we need to compare with the first boundary # to check if the row have inverted direction # and offset the value if not firstBoundary: firstBoundary = True firstBoundaryValue = it else: if it < firstBoundaryValue: it -= 1 elif it > firstBoundaryValue: it += 1 inc = 2 except IndexError: continue it = it + inc pm.progressWindow(e=True, endProgress=True) # Eye Mesh skinning skinCluster = skin.getSkinCluster(eyeMesh) if not skinCluster: skinCluster = pm.skinCluster(eyeCenter_jnt, eyeMesh, tsb=True, nw=1, n='skinClsEye')
def rig( eyeMesh=None, edgeLoop="", blinkH=20, namePrefix="eye", offset=0.05, rigidLoops=2, falloffLoops=4, headJnt=None, doSkin=True, parent_node=None, ctlName="ctl", sideRange=False, customCorner=False, intCorner=None, extCorner=None, ctlSet=None, defSet=None, upperVTrack=0.02, upperHTrack=0.01, lowerVTrack=0.02, lowerHTrack=0.01, aim_controller="", deformers_group="", everyNVertex=1, ): """Create eyelid and eye rig Args: eyeMesh (TYPE): Description edgeLoop (TYPE): Description blinkH (TYPE): Description namePrefix (TYPE): Description offset (TYPE): Description rigidLoops (TYPE): Description falloffLoops (TYPE): Description headJnt (TYPE): Description doSkin (TYPE): Description parent_node (None, optional): Description ctlName (str, optional): Description sideRange (bool, optional): Description customCorner (bool, optional): Description intCorner (None, optional): Description extCorner (None, optional): Description ctlSet (None, optional): Description defSet (None, optional): Description upperVTrack (None, optional): Description upperHTrack (None, optional): Description lowerVTrack (None, optional): Description lowerHTrack (None, optional): Description aim_controller (None, optional): Description deformers_group (None, optional): Description everyNVertex (int, optional): Will create a joint every N vertex No Longer Returned: TYPE: Description """ ########################################## # INITIAL SETUP ########################################## up_axis = pm.upAxis(q=True, axis=True) if up_axis == "z": z_up = True else: z_up = False # getters edgeLoopList = get_edge_loop(edgeLoop) eyeMesh = get_eye_mesh(eyeMesh) # checkers if not edgeLoopList or not eyeMesh: return if doSkin: if not headJnt: pm.displayWarning("Please set the Head Jnt or unCheck " "Compute Topological Autoskin") return # Convert data blinkH = blinkH / 100.0 # Initial Data bboxCenter = meshNavigation.bboxCenter(eyeMesh) extr_v = meshNavigation.getExtremeVertexFromLoop(edgeLoopList, sideRange, z_up) upPos = extr_v[0] lowPos = extr_v[1] inPos = extr_v[2] outPos = extr_v[3] edgeList = extr_v[4] vertexList = extr_v[5] # Detect the side L or R from the x value if inPos.getPosition(space="world")[0] < 0.0: side = "R" inPos = extr_v[3] outPos = extr_v[2] normalPos = outPos npw = normalPos.getPosition(space="world") normalVec = npw - bboxCenter else: side = "L" normalPos = outPos npw = normalPos.getPosition(space="world") normalVec = bboxCenter - npw # Manual Vertex corners if customCorner: if intCorner: try: if side == "R": inPos = pm.PyNode(extCorner) else: inPos = pm.PyNode(intCorner) except pm.MayaNodeError: pm.displayWarning("%s can not be found" % intCorner) return else: pm.displayWarning("Please set the internal eyelid corner") return if extCorner: try: normalPos = pm.PyNode(extCorner) npw = normalPos.getPosition(space="world") if side == "R": outPos = pm.PyNode(intCorner) normalVec = npw - bboxCenter else: outPos = pm.PyNode(extCorner) normalVec = bboxCenter - npw except pm.MayaNodeError: pm.displayWarning("%s can not be found" % extCorner) return else: pm.displayWarning("Please set the external eyelid corner") return # Check if we have prefix: if namePrefix: namePrefix = string.removeInvalidCharacter(namePrefix) else: pm.displayWarning("Prefix is needed") return def setName(name, ind=None): namesList = [namePrefix, side, name] if ind is not None: namesList[1] = side + str(ind) name = "_".join(namesList) return name if pm.ls(setName("root")): pm.displayWarning("The object %s already exist in the scene. Please " "choose another name prefix" % setName("root")) return ########################################## # CREATE OBJECTS ########################################## # Eye root eye_root = primitive.addTransform(None, setName("root")) eyeCrv_root = primitive.addTransform(eye_root, setName("crvs")) # Eyelid Main crvs try: upEyelid_edge = meshNavigation.edgeRangeInLoopFromMid( edgeList, upPos, inPos, outPos) up_crv = curve.createCurveFromOrderedEdges(upEyelid_edge, inPos, setName("upperEyelid"), parent=eyeCrv_root) upCtl_crv = curve.createCurveFromOrderedEdges(upEyelid_edge, inPos, setName("upCtl_crv"), parent=eyeCrv_root) pm.rebuildCurve(upCtl_crv, s=2, rt=0, rpo=True, ch=False) lowEyelid_edge = meshNavigation.edgeRangeInLoopFromMid( edgeList, lowPos, inPos, outPos) low_crv = curve.createCurveFromOrderedEdges(lowEyelid_edge, inPos, setName("lowerEyelid"), parent=eyeCrv_root) lowCtl_crv = curve.createCurveFromOrderedEdges(lowEyelid_edge, inPos, setName("lowCtl_crv"), parent=eyeCrv_root) pm.rebuildCurve(lowCtl_crv, s=2, rt=0, rpo=True, ch=False) except UnboundLocalError: if customCorner: pm.displayWarning("This error is maybe caused because the custom " "Corner vertex is not part of the edge loop") pm.displayError(traceback.format_exc()) return # blendshape curves. All crv have 30 point to allow blendshape connect upDriver_crv = curve.createCurveFromCurve(up_crv, setName("upDriver_crv"), nbPoints=30, parent=eyeCrv_root) upDriver_crv.attr("lineWidth").set(5) lowDriver_crv = curve.createCurveFromCurve(low_crv, setName("lowDriver_crv"), nbPoints=30, parent=eyeCrv_root) lowDriver_crv.attr("lineWidth").set(5) upRest_target_crv = curve.createCurveFromCurve( up_crv, setName("upRest_target_crv"), nbPoints=30, parent=eyeCrv_root) lowRest_target_crv = curve.createCurveFromCurve( low_crv, setName("lowRest_target_crv"), nbPoints=30, parent=eyeCrv_root) upProfile_target_crv = curve.createCurveFromCurve( up_crv, setName("upProfile_target_crv"), nbPoints=30, parent=eyeCrv_root, ) lowProfile_target_crv = curve.createCurveFromCurve( low_crv, setName("lowProfile_target_crv"), nbPoints=30, parent=eyeCrv_root, ) # mid driver midUpDriver_crv = curve.createCurveFromCurve(up_crv, setName("midUpDriver_crv"), nbPoints=30, parent=eyeCrv_root) midLowDriver_crv = curve.createCurveFromCurve(low_crv, setName("midLowDriver_crv"), nbPoints=30, parent=eyeCrv_root) # curve that define the close point of the eyelid closeTarget_crv = curve.createCurveFromCurve(up_crv, setName("closeTarget_crv"), nbPoints=30, parent=eyeCrv_root) eyeCrv_root.attr("visibility").set(False) # localBBOX localBBox = eyeMesh.getBoundingBox(invisible=True, space="world") wRadius = abs((localBBox[0][0] - localBBox[1][0])) dRadius = abs((localBBox[0][1] - localBBox[1][1]) / 1.7) # Groups if not ctlSet: ctlSet = "rig_controllers_grp" try: ctlSet = pm.PyNode(ctlSet) except pm.MayaNodeError: pm.sets(n=ctlSet, em=True) ctlSet = pm.PyNode(ctlSet) if not defSet: defSet = "rig_deformers_grp" try: defset = pm.PyNode(defSet) except pm.MayaNodeError: pm.sets(n=defSet, em=True) defset = pm.PyNode(defSet) # Calculate center looking at averagePosition = (upPos.getPosition(space="world") + lowPos.getPosition( space="world") + inPos.getPosition(space="world") + outPos.getPosition(space="world")) / 4 if z_up: axis = "zx" else: axis = "z-x" t = transform.getTransformLookingAt(bboxCenter, averagePosition, normalVec, axis=axis, negate=False) over_npo = primitive.addTransform(eye_root, setName("center_lookatRoot"), t) center_lookat = primitive.addTransform(over_npo, setName("center_lookat"), t) if side == "R": over_npo.attr("rx").set(over_npo.attr("rx").get() * -1) over_npo.attr("ry").set(over_npo.attr("ry").get() + 180) over_npo.attr("sz").set(-1) t = transform.getTransform(over_npo) # Tracking # Eye aim control t_arrow = transform.getTransformLookingAt( bboxCenter, averagePosition, upPos.getPosition(space="world"), axis="zy", negate=False, ) radius = abs((localBBox[0][0] - localBBox[1][0]) / 1.7) arrow_ctl = None arrow_npo = None if aim_controller: arrow_ctl = pm.PyNode(aim_controller) else: arrow_npo = primitive.addTransform(eye_root, setName("aim_npo"), t_arrow) arrow_ctl = icon.create( arrow_npo, setName("aim_%s" % ctlName), t_arrow, icon="arrow", w=1, po=datatypes.Vector(0, 0, radius), color=4, ) if len(ctlName.split("_")) == 2 and ctlName.split("_")[-1] == "ghost": pass else: pm.sets(ctlSet, add=arrow_ctl) attribute.setKeyableAttributes(arrow_ctl, params=["rx", "ry", "rz"]) attribute.addAttribute(arrow_ctl, "isCtl", "bool", keyable=False) # tracking custom trigger if side == "R": tt = t_arrow else: tt = t aimTrigger_root = primitive.addTransform(center_lookat, setName("aimTrigger_root"), tt) # For some unknown reason the right side gets scewed rotation values mgear.core.transform.resetTransform(aimTrigger_root) aimTrigger_lvl = primitive.addTransform(aimTrigger_root, setName("aimTrigger_lvl"), tt) # For some unknown reason the right side gets scewed rotation values mgear.core.transform.resetTransform(aimTrigger_lvl) aimTrigger_lvl.attr("tz").set(1.0) aimTrigger_ref = primitive.addTransform(aimTrigger_lvl, setName("aimTrigger_ref"), tt) # For some unknown reason the right side gets scewed rotation values mgear.core.transform.resetTransform(aimTrigger_ref) aimTrigger_ref.attr("tz").set(0.0) # connect trigger with arrow_ctl pm.parentConstraint(arrow_ctl, aimTrigger_ref, mo=True) # Blink driver controls if z_up: trigger_axis = "tz" ro_up = [0, 1.57079633 * 2, 1.57079633] ro_low = [0, 0, 1.57079633] po = [0, offset * -1, 0] low_pos = 2 # Z else: trigger_axis = "ty" ro_up = (1.57079633, 1.57079633, 0) ro_low = [1.57079633, 1.57079633, 1.57079633 * 2] po = [0, 0, offset] low_pos = 1 # Y # upper ctl p = upRest_target_crv.getCVs(space="world")[15] ut = transform.setMatrixPosition(datatypes.Matrix(), p) npo = primitive.addTransform(over_npo, setName("upBlink_npo"), ut) up_ctl = icon.create( npo, setName("upBlink_ctl"), ut, icon="arrow", w=2.5, d=2.5, ro=datatypes.Vector(ro_up[0], ro_up[1], ro_up[2]), po=datatypes.Vector(po[0], po[1], po[2]), color=4, ) attribute.setKeyableAttributes(up_ctl, [trigger_axis]) pm.sets(ctlSet, add=up_ctl) # use translation of the object to drive the blink blink_driver = primitive.addTransform(up_ctl, setName("blink_drv"), ut) # lowe ctl p_low = lowRest_target_crv.getCVs(space="world")[15] p[low_pos] = p_low[low_pos] lt = transform.setMatrixPosition(ut, p) npo = primitive.addTransform(over_npo, setName("lowBlink_npo"), lt) low_ctl = icon.create( npo, setName("lowBlink_ctl"), lt, icon="arrow", w=1.5, d=1.5, ro=datatypes.Vector(ro_low[0], ro_low[1], ro_low[2]), po=datatypes.Vector(po[0], po[1], po[2]), color=4, ) attribute.setKeyableAttributes(low_ctl, [trigger_axis]) pm.sets(ctlSet, add=low_ctl) # Controls lists upControls = [] trackLvl = [] track_corner_lvl = [] corner_ctl = [] ghost_ctl = [] # upper eyelid controls upperCtlNames = ["inCorner", "upInMid", "upMid", "upOutMid", "outCorner"] cvs = upCtl_crv.getCVs(space="world") if side == "R" and not sideRange: # if side == "R": cvs = [cv for cv in reversed(cvs)] # offset = offset * -1 for i, cv in enumerate(cvs): if utils.is_odd(i): color = 14 wd = 0.3 icon_shape = "circle" params = ["tx", "ty", "tz"] else: color = 4 wd = 0.6 icon_shape = "circle" params = [ "tx", "ty", "tz", "ro", "rx", "ry", "rz", "sx", "sy", "sz", ] t = transform.setMatrixPosition(t, cvs[i]) npo = primitive.addTransform(center_lookat, setName("%s_npo" % upperCtlNames[i]), t) npoBase = npo # track for corners and mid point level if i in [0, 2, 4]: # we add an extra level to input the tracking ofset values npo = primitive.addTransform(npo, setName("%s_trk" % upperCtlNames[i]), t) if i == 2: trackLvl.append(npo) else: track_corner_lvl.append(npo) if i in [1, 2, 3]: ctl = primitive.addTransform(npo, setName("%s_loc" % upperCtlNames[i]), t) # ghost controls if i == 2: gt = transform.setMatrixPosition( t, transform.getPositionFromMatrix(ut)) else: gt = t npo_g = primitive.addTransform( up_ctl, setName("%sCtl_npo" % upperCtlNames[i]), gt) ctl_g = icon.create( npo_g, setName("%s_%s" % (upperCtlNames[i], ctlName)), gt, icon=icon_shape, w=wd, d=wd, ro=datatypes.Vector(1.57079633, 0, 0), po=datatypes.Vector(0, 0, offset), color=color, ) # define the ctl_param to recive the ctl configuration ctl_param = ctl_g ghost_ctl.append(ctl_g) # connect local SRT rigbits.connectLocalTransform([ctl_g, ctl]) else: ctl = icon.create( npo, setName("%s_%s" % (upperCtlNames[i], ctlName)), t, icon=icon_shape, w=wd, d=wd, ro=datatypes.Vector(1.57079633, 0, 0), po=datatypes.Vector(0, 0, offset), color=color, ) # define the ctl_param to recive the ctl configuration ctl_param = ctl attribute.addAttribute(ctl_param, "isCtl", "bool", keyable=False) attribute.add_mirror_config_channels(ctl_param) node.add_controller_tag(ctl_param, over_npo) if len(ctlName.split("_")) == 2 and ctlName.split("_")[-1] == "ghost": pass else: pm.sets(ctlSet, add=ctl_param) attribute.setKeyableAttributes(ctl_param, params) upControls.append(ctl) # add corner ctls to corner ctl list for tracking if i in [0, 4]: corner_ctl.append(ctl) # if side == "R": # npoBase.attr("ry").set(180) # npoBase.attr("sz").set(-1) # adding parent constraints to odd controls for i, ctl in enumerate(upControls): if utils.is_odd(i): cns_node = pm.parentConstraint(upControls[i - 1], upControls[i + 1], ctl.getParent(), mo=True) # Make the constraint "noFlip" cns_node.interpType.set(0) # adding parent constraint ghost controls cns_node = pm.parentConstraint(ghost_ctl[1], upControls[0], ghost_ctl[0].getParent(), mo=True) cns_node.interpType.set(0) cns_node = pm.parentConstraint(ghost_ctl[1], upControls[-1], ghost_ctl[2].getParent(), mo=True) cns_node.interpType.set(0) # lower eyelid controls lowControls = [upControls[0]] lowerCtlNames = [ "inCorner", "lowInMid", "lowMid", "lowOutMid", "outCorner", ] cvs = lowCtl_crv.getCVs(space="world") if side == "R" and not sideRange: cvs = [cv for cv in reversed(cvs)] for i, cv in enumerate(cvs): # we skip the first and last point since is already in the uper eyelid if i in [0, 4]: continue if utils.is_odd(i): color = 14 wd = 0.3 icon_shape = "circle" params = ["tx", "ty", "tz"] else: color = 4 wd = 0.6 icon_shape = "circle" params = [ "tx", "ty", "tz", "ro", "rx", "ry", "rz", "sx", "sy", "sz", ] t = transform.setMatrixPosition(t, cvs[i]) npo = primitive.addTransform(center_lookat, setName("%s_npo" % lowerCtlNames[i]), t) npoBase = npo if i in [1, 2, 3]: if i == 2: # we add an extra level to input the tracking ofset values npo = primitive.addTransform( npo, setName("%s_trk" % lowerCtlNames[i]), t) trackLvl.append(npo) ctl = primitive.addTransform(npo, setName("%s_loc" % lowerCtlNames[i]), t) # ghost controls if i == 2: gt = transform.setMatrixPosition( t, transform.getPositionFromMatrix(lt)) else: gt = t # ghost controls npo_g = primitive.addTransform( low_ctl, setName("%sCtl_npo" % lowerCtlNames[i]), gt) ctl_g = icon.create( npo_g, setName("%s_%s" % (lowerCtlNames[i], ctlName)), gt, icon=icon_shape, w=wd, d=wd, ro=datatypes.Vector(1.57079633, 0, 0), po=datatypes.Vector(0, 0, offset), color=color, ) # define the ctl_param to recive the ctl configuration ctl_param = ctl_g ghost_ctl.append(ctl_g) # connect local SRT rigbits.connectLocalTransform([ctl_g, ctl]) else: ctl = icon.create( npo, setName("%s_%s" % (lowerCtlNames[i], ctlName)), t, icon=icon_shape, w=wd, d=wd, ro=datatypes.Vector(1.57079633, 0, 0), po=datatypes.Vector(0, 0, offset), color=color, ) # define the ctl_param to recive the ctl configuration ctl_param = ctl attribute.addAttribute(ctl_param, "isCtl", "bool", keyable=False) attribute.add_mirror_config_channels(ctl_param) lowControls.append(ctl) if len(ctlName.split("_")) == 2 and ctlName.split("_")[-1] == "ghost": pass else: pm.sets(ctlSet, add=ctl_param) attribute.setKeyableAttributes(ctl_param, params) # mirror behaviout on R side controls # if side == "R": # npoBase.attr("ry").set(180) # npoBase.attr("sz").set(-1) for lctl in reversed(lowControls[1:]): node.add_controller_tag(lctl, over_npo) lowControls.append(upControls[-1]) # adding parent constraints to odd controls for i, ctl in enumerate(lowControls): if utils.is_odd(i): cns_node = pm.parentConstraint( lowControls[i - 1], lowControls[i + 1], ctl.getParent(), mo=True, ) # Make the constraint "noFlip" cns_node.interpType.set(0) # adding parent constraint ghost controls cns_node = pm.parentConstraint(ghost_ctl[4], upControls[0], ghost_ctl[3].getParent(), mo=True) cns_node.interpType.set(0) cns_node = pm.parentConstraint(ghost_ctl[4], upControls[-1], ghost_ctl[5].getParent(), mo=True) cns_node.interpType.set(0) ########################################## # OPERATORS ########################################## # Connecting control crvs with controls applyop.gear_curvecns_op(upCtl_crv, upControls) applyop.gear_curvecns_op(lowCtl_crv, lowControls) # adding wires w1 = pm.wire(up_crv, w=upDriver_crv)[0] w2 = pm.wire(low_crv, w=lowDriver_crv)[0] w3 = pm.wire(upProfile_target_crv, w=upCtl_crv)[0] w4 = pm.wire(lowProfile_target_crv, w=lowCtl_crv)[0] if z_up: trigger_axis = "tz" else: trigger_axis = "ty" # connect blink driver pm.pointConstraint(low_ctl, blink_driver, mo=False) rest_val = blink_driver.attr(trigger_axis).get() up_div_node = node.createDivNode(up_ctl.attr(trigger_axis), rest_val) low_div_node = node.createDivNode(low_ctl.attr(trigger_axis), rest_val * -1) # contact driver minus_node = node.createPlusMinusAverage1D( [rest_val, blink_driver.attr(trigger_axis)], operation=2) contact_div_node = node.createDivNode(minus_node.output1D, rest_val) # wire tension for w in [w1, w2, w3, w4]: w.dropoffDistance[0].set(100) # TODO: what is the best solution? # trigger using proximity # remap_node = pm.createNode("remapValue") # contact_div_node.outputX >> remap_node.inputValue # remap_node.value[0].value_Interp.set(2) # remap_node.inputMin.set(0.995) # reverse_node = node.createReverseNode(remap_node.outColorR) # for w in [w1, w2]: # reverse_node.outputX >> w.scale[0] # trigger at starting movement for up and low # up remap_node = pm.createNode("remapValue") up_ctl.attr(trigger_axis) >> remap_node.inputValue remap_node.value[0].value_Interp.set(2) remap_node.inputMax.set(rest_val / 8) reverse_node = node.createReverseNode(remap_node.outColorR) reverse_node.outputX >> w1.scale[0] # low remap_node = pm.createNode("remapValue") low_ctl.attr(trigger_axis) >> remap_node.inputValue remap_node.value[0].value_Interp.set(2) remap_node.inputMin.set((rest_val / 8) * -1) remap_node.outColorR >> w2.scale[0] # mid position drivers blendshapes bs_midUpDrive = pm.blendShape( lowRest_target_crv, upProfile_target_crv, midUpDriver_crv, n="midUpDriver_blendShape", ) bs_midLowDrive = pm.blendShape( upRest_target_crv, lowProfile_target_crv, midLowDriver_crv, n="midlowDriver_blendShape", ) bs_closeTarget = pm.blendShape( midUpDriver_crv, midLowDriver_crv, closeTarget_crv, n="closeTarget_blendShape", ) pm.connectAttr( up_div_node.outputX, bs_midUpDrive[0].attr(lowRest_target_crv.name()), ) pm.connectAttr( low_div_node.outputX, bs_midLowDrive[0].attr(upRest_target_crv.name()), ) pm.setAttr(bs_closeTarget[0].attr(midUpDriver_crv.name()), 0.5) pm.setAttr(bs_closeTarget[0].attr(midLowDriver_crv.name()), 0.5) # Main crv drivers bs_upBlink = pm.blendShape( lowRest_target_crv, closeTarget_crv, upProfile_target_crv, upDriver_crv, n="upBlink_blendShape", ) bs_lowBlink = pm.blendShape( upRest_target_crv, closeTarget_crv, lowProfile_target_crv, lowDriver_crv, n="lowBlink_blendShape", ) # blink contact connections cond_node_up = node.createConditionNode(contact_div_node.outputX, 1, 3, 0, up_div_node.outputX) pm.connectAttr( cond_node_up.outColorR, bs_upBlink[0].attr(lowRest_target_crv.name()), ) cond_node_low = node.createConditionNode(contact_div_node.outputX, 1, 3, 0, low_div_node.outputX) pm.connectAttr( cond_node_low.outColorR, bs_lowBlink[0].attr(upRest_target_crv.name()), ) cond_node_close = node.createConditionNode(contact_div_node.outputX, 1, 2, 1, 0) cond_node_close.colorIfFalseR.set(0) pm.connectAttr( cond_node_close.outColorR, bs_upBlink[0].attr(closeTarget_crv.name()), ) pm.connectAttr( cond_node_close.outColorR, bs_lowBlink[0].attr(closeTarget_crv.name()), ) pm.setAttr(bs_upBlink[0].attr(upProfile_target_crv.name()), 1) pm.setAttr(bs_lowBlink[0].attr(lowProfile_target_crv.name()), 1) # joints root jnt_root = primitive.addTransformFromPos(eye_root, setName("joints"), pos=bboxCenter) if deformers_group: deformers_group = pm.PyNode(deformers_group) pm.parentConstraint(eye_root, jnt_root, mo=True) pm.scaleConstraint(eye_root, jnt_root, mo=True) deformers_group.addChild(jnt_root) # head joint if headJnt: try: headJnt = pm.PyNode(headJnt) jnt_base = headJnt except pm.MayaNodeError: pm.displayWarning("Aborted can not find %s " % headJnt) return else: # Eye root jnt_base = jnt_root eyeTargets_root = primitive.addTransform(eye_root, setName("targets")) eyeCenter_jnt = rigbits.addJnt(arrow_ctl, jnt_base, grp=defset, jntName=setName("center_jnt")) # Upper Eyelid joints ################################################## cvs = up_crv.getCVs(space="world") upCrv_info = node.createCurveInfoNode(up_crv) # aim constrain targets and joints upperEyelid_aimTargets = [] upperEyelid_jnt = [] upperEyelid_jntRoot = [] if z_up: axis = "zy" wupVector = [0, 0, 1] else: axis = "-yz" wupVector = [0, 1, 0] for i, cv in enumerate(cvs): if i % everyNVertex: continue # aim targets trn = primitive.addTransformFromPos(eyeTargets_root, setName("upEyelid_aimTarget", i), pos=cv) upperEyelid_aimTargets.append(trn) # connecting positions with crv pm.connectAttr(upCrv_info + ".controlPoints[%s]" % str(i), trn.attr("translate")) # joints jntRoot = primitive.addJointFromPos(jnt_root, setName("upEyelid_jnt_base", i), pos=bboxCenter) jntRoot.attr("radius").set(0.08) jntRoot.attr("visibility").set(False) upperEyelid_jntRoot.append(jntRoot) applyop.aimCns(jntRoot, trn, axis=axis, wupObject=jnt_root, wupVector=wupVector) jnt_ref = primitive.addJointFromPos(jntRoot, setName("upEyelid_jnt_ref", i), pos=cv) jnt_ref.attr("radius").set(0.08) jnt_ref.attr("visibility").set(False) jnt = rigbits.addJnt(jnt_ref, jnt_base, grp=defset, jntName=setName("upEyelid_jnt", i)) upperEyelid_jnt.append(jnt) # Lower Eyelid joints ################################################## cvs = low_crv.getCVs(space="world") lowCrv_info = node.createCurveInfoNode(low_crv) # aim constrain targets and joints lowerEyelid_aimTargets = [] lowerEyelid_jnt = [] lowerEyelid_jntRoot = [] for i, cv in enumerate(cvs): if i in [0, len(cvs) - 1]: continue if i % everyNVertex: continue # aim targets trn = primitive.addTransformFromPos(eyeTargets_root, setName("lowEyelid_aimTarget", i), pos=cv) lowerEyelid_aimTargets.append(trn) # connecting positions with crv pm.connectAttr(lowCrv_info + ".controlPoints[%s]" % str(i), trn.attr("translate")) # joints jntRoot = primitive.addJointFromPos(jnt_root, setName("lowEyelid_base", i), pos=bboxCenter) jntRoot.attr("radius").set(0.08) jntRoot.attr("visibility").set(False) lowerEyelid_jntRoot.append(jntRoot) applyop.aimCns(jntRoot, trn, axis=axis, wupObject=jnt_root, wupVector=wupVector) jnt_ref = primitive.addJointFromPos(jntRoot, setName("lowEyelid_jnt_ref", i), pos=cv) jnt_ref.attr("radius").set(0.08) jnt_ref.attr("visibility").set(False) jnt = rigbits.addJnt(jnt_ref, jnt_base, grp=defset, jntName=setName("lowEyelid_jnt", i)) lowerEyelid_jnt.append(jnt) # Adding channels for eye tracking upVTracking_att = attribute.addAttribute(up_ctl, "vTracking", "float", upperVTrack, minValue=0) upHTracking_att = attribute.addAttribute(up_ctl, "hTracking", "float", upperHTrack, minValue=0) lowVTracking_att = attribute.addAttribute(low_ctl, "vTracking", "float", lowerVTrack, minValue=0) lowHTracking_att = attribute.addAttribute(low_ctl, "hTracking", "float", lowerHTrack, minValue=0) # vertical tracking connect up_mult_node = node.createMulNode(upVTracking_att, aimTrigger_ref.attr("ty")) low_mult_node = node.createMulNode(lowVTracking_att, aimTrigger_ref.attr("ty")) # remap to use the low or the up eyelid as driver contact base on # the eyetrack trigger direction uT_remap_node = pm.createNode("remapValue") aimTrigger_ref.attr("ty") >> uT_remap_node.inputValue uT_remap_node.inputMax.set(0.1) uT_remap_node.inputMin.set(-0.1) up_mult_node.outputX >> uT_remap_node.outputMax low_mult_node.outputX >> uT_remap_node.outputMin # up u_remap_node = pm.createNode("remapValue") contact_div_node.outputX >> u_remap_node.inputValue u_remap_node.value[0].value_Interp.set(2) u_remap_node.inputMin.set(0.9) up_mult_node.outputX >> u_remap_node.outputMin uT_remap_node.outColorR >> u_remap_node.outputMax # low l_remap_node = pm.createNode("remapValue") contact_div_node.outputX >> l_remap_node.inputValue l_remap_node.value[0].value_Interp.set(2) l_remap_node.inputMin.set(0.9) low_mult_node.outputX >> l_remap_node.outputMin uT_remap_node.outColorR >> l_remap_node.outputMax # up connect and turn down to low when contact pm.connectAttr(u_remap_node.outColorR, trackLvl[0].attr("ty")) pm.connectAttr(l_remap_node.outColorR, trackLvl[1].attr("ty")) # horizontal tracking connect mult_node = node.createMulNode(upHTracking_att, aimTrigger_ref.attr("tx")) # Correct right side horizontal tracking # if side == "R": # mult_node = node.createMulNode(mult_node.attr("outputX"), -1) pm.connectAttr(mult_node + ".outputX", trackLvl[0].attr("tx")) mult_node = node.createMulNode(lowHTracking_att, aimTrigger_ref.attr("tx")) # Correct right side horizontal tracking # if side == "R": # mult_node = node.createMulNode(mult_node.attr("outputX"), -1) pm.connectAttr(mult_node + ".outputX", trackLvl[1].attr("tx")) # adding channels for corner tracking # track_corner_lvl for i, ctl in enumerate(corner_ctl): VTracking_att = attribute.addAttribute(ctl, "vTracking", "float", 0.1, minValue=0) if z_up: mult_node = node.createMulNode(VTracking_att, up_ctl.tz) mult_node2 = node.createMulNode(VTracking_att, low_ctl.tz) plus_node = node.createPlusMinusAverage1D( [mult_node.outputX, mult_node2.outputX]) mult_node3 = node.createMulNode(plus_node.output1D, -1) pm.connectAttr(mult_node3.outputX, track_corner_lvl[i].attr("ty")) else: mult_node = node.createMulNode(VTracking_att, up_ctl.ty) mult_node2 = node.createMulNode(VTracking_att, low_ctl.ty) plus_node = node.createPlusMinusAverage1D( [mult_node.outputX, mult_node2.outputX]) pm.connectAttr(plus_node.output1D, track_corner_lvl[i].attr("ty")) ########################################### # Reparenting ########################################### if parent_node: try: if isinstance(parent_node, string_types): parent_node = pm.PyNode(parent_node) parent_node.addChild(eye_root) except pm.MayaNodeError: pm.displayWarning("The eye rig can not be parent to: %s. Maybe " "this object doesn't exist." % parent_node) ########################################### # Auto Skinning ########################################### if doSkin: # eyelid vertex rows totalLoops = rigidLoops + falloffLoops vertexLoopList = meshNavigation.getConcentricVertexLoop( vertexList, totalLoops) vertexRowList = meshNavigation.getVertexRowsFromLoops(vertexLoopList) # we set the first value 100% for the first initial loop skinPercList = [1.0] # we expect to have a regular grid topology for r in range(rigidLoops): for rr in range(2): skinPercList.append(1.0) increment = 1.0 / float(falloffLoops) # we invert to smooth out from 100 to 0 inv = 1.0 - increment for r in range(falloffLoops): for rr in range(2): if inv < 0.0: inv = 0.0 skinPercList.append(inv) inv -= increment # this loop add an extra 0.0 indices to avoid errors for r in range(10): for rr in range(2): skinPercList.append(0.0) # base skin geo = pm.listRelatives(edgeLoopList[0], parent=True)[0] # Check if the object has a skinCluster objName = pm.listRelatives(geo, parent=True)[0] skinCluster = skin.getSkinCluster(objName) if not skinCluster: skinCluster = pm.skinCluster(headJnt, geo, tsb=True, nw=2, n="skinClsEyelid") eyelidJoints = upperEyelid_jnt + lowerEyelid_jnt pm.progressWindow(title="Auto skinning process", progress=0, max=len(eyelidJoints)) firstBoundary = False for jnt in eyelidJoints: pm.progressWindow(e=True, step=1, status="\nSkinning %s" % jnt) skinCluster.addInfluence(jnt, weight=0) v = meshNavigation.getClosestVertexFromTransform(geo, jnt) for row in vertexRowList: if v in row: it = 0 # iterator inc = 1 # increment for i, rv in enumerate(row): try: perc = skinPercList[it] t_val = [(jnt, perc), (headJnt, 1.0 - perc)] pm.skinPercent(skinCluster, rv, transformValue=t_val) if rv.isOnBoundary(): # we need to compare with the first boundary # to check if the row have inverted direction # and offset the value if not firstBoundary: firstBoundary = True firstBoundaryValue = it else: if it < firstBoundaryValue: it -= 1 elif it > firstBoundaryValue: it += 1 inc = 2 except IndexError: continue it = it + inc pm.progressWindow(e=True, endProgress=True) # Eye Mesh skinning skinCluster = skin.getSkinCluster(eyeMesh) if not skinCluster: skinCluster = pm.skinCluster(eyeCenter_jnt, eyeMesh, tsb=True, nw=1, n="skinClsEye")
def addJointCtl(self, parent, name, m, color, iconShape, tp=None, lp=True, mirrorConf=[0, 0, 0, 0, 0, 0, 0, 0, 0], guide_loc_ref=None, **kwargs): """ Create the control and apply the shape, if this is alrealdy stored in the guide controllers grp. Args: parent (dagNode): The control parent name (str): The control name. m (matrix): The transfromation matrix for the control. color (int or list of float): The color for the control in index or RGB. iconShape (str): The controls default shape. tp (dagNode): Tag Parent Control object to connect as a parent controller lp (bool): Lock the parent controller channels kwargs (variant): Other arguments for the iconShape type variations Returns: dagNode: The Control. """ if "degree" not in kwargs.keys(): kwargs["degree"] = 1 # print name # fullName = self.getName(name) # remove the _ctl hardcoded in component name if name.endswith("_ctl"): name = name[:-4] # in some situation the name will be only ctl and should be removed # for example control_01 if name.endswith("ctl"): name = name[:-3] # NOTE: this is a dirty workaround to keep backwards compatibility on # control_01 component where the description of the cotrol was just # the ctl suffix. rule = self.options["ctl_name_rule"] if not name: """ if rule == naming.DEFAULT_NAMING_RULE: rule = r"{component}_{side}{index}_{extension}" else: # this ensure we always have name if the naming rule is custom name = "control" """ rule = r"{component}_{side}{index}_{extension}" fullName = self.getName( name, rule=rule, ext="ctl", letter_case=self.options["ctl_description_letter_case"]) bufferName = fullName + "_controlBuffer" if bufferName in self.rig.guide.controllers.keys(): ctl_ref = self.rig.guide.controllers[bufferName] else: ctl_ref = icon.create(parent, fullName + "ref", m, color, iconShape, **kwargs) ctl = primitive.addJoint(parent, fullName, m) ctl.setAttr("drawStyle", 2) # draw none for shape in ctl_ref.getShapes(): ctl.addChild(shape, shape=True, add=True) pm.rename(shape, fullName + "Shape") pm.delete(ctl_ref) icon.setcolor(ctl, color) # add metadata attirbutes. attribute.addAttribute(ctl, "isCtl", "bool", keyable=False) attribute.addAttribute(ctl, "uiHost", "string", keyable=False) ctl.addAttr("uiHost_cnx", at='message', multi=False) # set the control Role for complex components. If the component is # of type control_01 or world_ctl the control role will default to None # since is only one control the role is not needed attribute.addAttribute(ctl, "ctl_role", "string", keyable=False, value=name) # locator reference for quick guide matching # TODO: this is a temporal implementation. We should store the full # guide data in future iterations if guide_loc_ref: attribute.addAttribute(ctl, "guide_loc_ref", "string", keyable=False, value=guide_loc_ref) # mgear name. This keep track of the default shifter name. This naming # system ensure that each control has a unique id. Tools like mirror or # flip pose can use it to track symmetrical controls attribute.addAttribute(ctl, "shifter_name", "string", keyable=False, value=self.getName(name) + "_ctl") attribute.addAttribute(ctl, "side_label", "string", keyable=False, value=self.side) attribute.addAttribute(ctl, "L_custom_side_label", "string", keyable=False, value=self.options["side_left_name"]) attribute.addAttribute(ctl, "R_custom_side_label", "string", keyable=False, value=self.options["side_right_name"]) attribute.addAttribute(ctl, "C_custom_side_label", "string", keyable=False, value=self.options["side_center_name"]) # create the attributes to handlde mirror and symetrical pose attribute.add_mirror_config_channels(ctl, mirrorConf) if self.settings["ctlGrp"]: ctlGrp = self.settings["ctlGrp"] self.addToGroup(ctl, ctlGrp, "controllers") else: ctlGrp = "controllers" self.addToGroup(ctl, ctlGrp) # lock the control parent attributes if is not a control if parent not in self.groups[ctlGrp] and lp: self.transform2Lock.append(parent) # Set the control shapes isHistoricallyInteresting for oShape in ctl.getShapes(): oShape.isHistoricallyInteresting.set(False) # connecting the always draw shapes on top to global attribute if versions.current() >= 20220000: pm.connectAttr(self.rig.ctlXRay_att, oShape.attr("alwaysDrawOnTop")) # set controller tag if versions.current() >= 201650: try: oldTag = pm.PyNode(ctl.name() + "_tag") if not oldTag.controllerObject.connections(): # NOTE: The next line is comment out. Because this will # happend alot since core does't clean # controller tags after deleting the control Object of the # tag. This have been log to Autodesk. # If orphane tags are found, it will be clean in silence. # pm.displayWarning("Orphane Tag: %s will be delete and # created new for: %s"%(oldTag.name(), ctl.name())) pm.delete(oldTag) except TypeError: pass self.add_controller_tag(ctl, tp) self.controlers.append(ctl) return ctl